| 2311 |
National Test House (NWR), Jaipur
| IS 14255 (1995) - "AERIAL BUNCHED CABLES-FOR WORKING VOLTAGES UPTO AND INCLUDING 11OOVOLTS " |
"AERIAL BUNCHED CABLES-FOR WORKING VOLTAGES UPTO AND INCLUDING 11OOVOLTS " |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 10.1 (1) g (High Voltage) |
1500.0 |
|
| 10.1 (1) f (Volume resistivity for XLPE) |
1000.0 |
|
| 10.1 (1) e (Insulation Thickness-Minimum-Neutral) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Minimum-Phase 3) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Minimum-Phase-2) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Minimum-Phase-1) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Average- Neutral) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Average-Phase-3) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Average-Phase-2) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Average-Phase-1) |
250.0 |
|
| 10.1 (1) c (v) (Water absorption (Gravimetric)) |
1500.0 |
|
| 10.1 (1) c (iV) (Shrinkage test) |
250.0 |
|
| 10.1 (1) c (iV) (Shrinkage test) |
250.0 |
|
| 10.1 (1) c (iV) (Shrinkage test) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Elongation under load) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Elongation under load) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Elongation under load) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Elongation under load) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Permanent elongation after cooling) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Permanent elongation after cooling) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Permanent elongation after cooling) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Permanent elongation after cooling) |
250.0 |
|
| 10.1 (1) c (ii) (% Tensile strength-PH1) |
250.0 |
|
| 10.1 (1) c (ii) (% Tensile strength-PH2) |
250.0 |
|
| 10.1 (1) c (ii) (% Tensile strength-PH3) |
250.0 |
|
| 10.1 (1) c (ii) (% Tensile strength-NE) |
250.0 |
|
| 10.1 (1) c (i) (Tensile strength-PH1) |
250.0 |
|
| 10.1 (1) c (i) (Tensile strength-PH2) |
250.0 |
|
| 10.1 (1) c (i) (Tensile strength-PH3) |
250.0 |
|
| 10.1 (1) c (i) (Tensile strength-NE) |
250.0 |
|
| 10.1 (1) c (i) (Elongation-PH1) |
250.0 |
|
| 10.1 (1) c (i) (Elongation-PH2) |
250.0 |
|
| 10.1 (1) c (i) (Elongation-PH3) |
250.0 |
|
| 10.1 (1) c (i) (Elongation-NE) |
-250.0 |
|
| 10 .1 (1) b (i) (Breaking load :Test on messenger conductor:) |
1000.0 |
|
| 10.1 (1) b (ii) (Elongation test :Test on messenger conductor:) |
1000.0 |
|
| 10.1 (1) b (iii) (Conductor resistance :Test on messenger conductor:) |
1000.0 |
|
| 10.1 (1) a (i) (Tensile Test) |
1000.0 |
|
| 10.1 (1) a (ii) (Wrapping test) |
500.0 |
|
| 10.1 (1) a (iii) (Resistance test-Phase 1) |
1000.0 |
|
| 10.1 (1) a (iii) (Tests on phase/street light conductor) |
1000.0 |
|
| 10.1 (1) a (iii) (Resistance test-Phase 3 :
Tests on phase/street light conductor) |
1000.0 |
|
| 10.2 j (Volume resistivity for XLPE) |
500.0 |
|
| 10.2 k (High Voltage) |
1500.0 |
|
| 10.2 h (Hot set test-Elongation under load) |
250.0 |
|
| 10.2 e (Conductor resistance-Neutral) |
1000.0 |
|
| 10.2 e (Conductor resistance- Phase-2) |
1000.0 |
|
| 10.2 e (Conductor resistance- Phase-3) |
1000.0 |
|
| 10.1 C VI (1) (Carbon Black Content) |
1000.0 |
|
| 10.1 C VI (2) (Physical tests for XLPE insulation - Carbon Black Dispersion) |
1500.0 |
|
|
| 2312 |
National Test House (ER), Kolkata
| AAI BAGDOGRA AIRPORT SPECIFICATION (2023) - AAI BAGDOGRA AIRPORT SPECIFICATION |
AAI BAGDOGRA AIRPORT SPECIFICATION |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| A (Thickness of ACP) |
1000.0 |
|
| A (Thickness of Aluminium Coil) |
1000.0 |
|
| B (Tensile Strength) |
1000.0 |
|
| B (Yield Strength) |
1000.0 |
|
| B (Elongation) |
1000.0 |
|
| F (Bend Test) |
2000.0 |
|
| C Paint Performance 1 (Specular gloss 60 degree angle
ASTM 523/4214) |
1000.0 |
|
| C PAINT Performance 2 (Thickness of coating in microns) |
1000.0 |
|
| C PAINT Performance 3 (Pencil Hardness test(11 ,11 B) ASTM 3363) |
1000.0 |
|
| C PAINT Performance 4 (Impact Resistance ASTM D 2794) |
2000.0 |
|
| D FIRE RESISTING BEHAVIOUR 3 (Surface Spread of Flame
(BS 476 Part VII)) |
5000.0 |
|
| E chemical &aging test 1 (chemical & Aging Test
1)Weathering & Conditioning test(ASTM D 2247) for 24 Hours) |
2000.0 |
|
| E chemical &aging test 2 (chemical & Aging Test
Salt Spray test for 500 hours(ISO 9227)) |
20000.0 |
|
| E chemical &aging test 2 (chemical & Aging Test
Salt Spray test for 3000 hours(ISO 9227)) |
100000.0 |
|
| E chemical &aging test 3 (Resistance to 5%(V/V)Hydrochloric acid solution for 24 hours) |
1000.0 |
|
| E chemical &aging test 3 (Resistance to 5%(V/V)H2SO4 acid solution for 24 hours) |
1000.0 |
|
|
| 2313 |
National Test House (ER), Kolkata
| Custom moisture-coal tar - Custom moisture-coal tar |
Custom moisture-coal tar |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Moisture, percent by mass) |
1200.0 |
|
|
| 2314 |
National Test House (SR), Chennai
| Bituminous Membrane-L-n-T (2022) - Water Proofing Membrane Firms Specification |
Water Proofing Membrane Firms Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Bituminous Membrane Results Attached Annexure) |
21000.0 |
|
|
| 2315 |
National Test House (ER), Kolkata
| IS 1180 : Part 1 (2014) - Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) (1100 kVA to 2 500 kVA) [1100 kVA to 2 500 kVA] |
Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) (1100 kVA to 2 500 kVA) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 21.2(a) (Measurement of Winding Resistance) |
1000.0 |
|
| 21.2(b) (Measurement of voltage ratio and,check ofvoltage vector relationship) |
2000.0 |
|
| 7.9 & 8.9 (Measurement of Permissible flux density and over fluxing) |
20000.0 |
|
| 21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test)) |
20000.0 |
|
| 21.3(b) (Temperatur Rise Test) |
40000.0 |
|
| 21.2(g) (Separate Source AC voltage withstand test) |
2500.0 |
|
| 21.5.1.221.5.2.221.5.3.2 (Pressure test (routine)) |
5000.0 |
|
| 21.4.(d) (Adhesion by Tape Test) |
5000.0 |
|
| 21.5.1.321.5.2.321.5.3.3 (Oil leakage test) |
7000.0 |
|
| 21.4( c) (Measurement of No load current at 112.5 percent voltage) |
2000.0 |
|
| 21.2(e) (Measurement of insulation resistance) |
1500.0 |
|
| 21.2(c) (Measurement of impedance voltage (principal tapping), shortcurcuit impedance and load loss (At 50% and 100% load)) |
8000.0 |
|
| 21.2(d) (Measurement of no Load and loss and current) |
6000.0 |
|
| 21.2(f) (lnduced Over Voltage withstand test) |
4000.0 |
|
| 21.4(a) (Determination of sound levels) |
7000.0 |
|
| 21.4( e) (BDV of Oil in the tranformer) |
10000.0 |
|
| 21.5.1.121.5.2.121.5.3.1 (Air Pressure (Type test)-Deflection) |
20000.0 |
|
| 21.5.2.1 (Permanent Deflection) |
20000.0 |
|
| 21.4( e) (Break Down Voltage) |
10000.0 |
|
| 21.2(f) (lnduced Over Voltage withstand test) |
4000.0 |
|
| 21.2(d) (No Load loss and current) |
6000.0 |
|
| 21.2(c) (Load Loss and % Impedance) |
8000.0 |
|
| 21.2(e) (Insulation Resistance) |
1500.0 |
|
| 21.4( c) (No load current) |
2000.0 |
|
| 8.9 (flux density and over fluxing) |
20000.0 |
|
| 7.9 (flux density and over fluxing) |
10000.0 |
|
| 21.5.3.3 (Oil leakage test) |
5000.0 |
|
| 21.2(g) (AC High Voltage Withstand Test) |
2500.0 |
|
| 21.3(b) (Temperature Rise of Oil and Windings.) |
40000.0 |
|
| 21.5.3.1 (Permanent Deflection) |
6000.0 |
|
| 21.4(a) (Determination of sound levels) |
7000.0 |
|
| As per CBIP Pub No. 317 Cl. 3.17 (Magnetic Balance Test) |
5000.0 |
|
| As per CBIP Manual No. 317 Cl. (Harmonics of No-load Current) |
15000.0 |
|
| As per CBIP No. 317 Cl. 3.10 (Zero Sequence Impedance Measurement) |
5000.0 |
|
| As per CBIP No. 317 Cl. 3.10 (Magnetic Balance Test) |
5000.0 |
|
| N.A. (Unbalance Current) |
5000.0 |
|
| CBIP Publication no. 317 (Polarization Index) |
2500.0 |
|
|
| 2316 |
National Test House (ER), Kolkata
| IRS:S63-2014 - PVC Insulated Underground, Unscreened Cable for Railway Signalling- Power Cable |
PVC Insulated Underground, Unscreened Cable for Railway Signalling- Power Cable |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.6.1 (Physical tests for conductor-Dimension) |
1000.0 |
|
| 5.6.2 (Physical tests for conductor-Annealing Test) |
2000.0 |
|
| 5.6.3 (Physical tests for conductor-Test for correspondence of cores) |
1000.0 |
|
| 5.7 (Conductor Resistance Test) |
2000.0 |
|
| 5.8.1 (Test for Armour wires/strips/tapes-Dimension) |
1000.0 |
|
| 5.8.2 (Test for Armour wires/strips/tapes- Tensile Strength and Percentage Elongation Test) |
2000.0 |
|
| 5.8.3 (Test for Armour wires/strips/tapes-Torsion Test (for Round wires only)) |
1000.0 |
|
| 5.8.4 (Test for Armour wires/strips/tapes-Winding Test(For Galvanised strips only)) |
2000.0 |
|
| 5.8.5(i)(a) (Test for Armour wires/strips/tapes-Tests for mass of Zinc Coating) |
1000.0 |
|
| 5.8.5(i)(b) (Test for Armour wires/strips/tapes-Tests for uniformity of Zinc Coating) |
1000.0 |
|
| 5.8.6 (Test for Armour wires/strips/tapes-Resistivity Test) |
2000.0 |
|
| 5.8.7 (Test for Armour wires/strips/tapes-Test for closeness of armour wires/strips) |
1000.0 |
|
| 5.9 (Test for thickness of insulation and sheath) |
1000.0 |
|
| 5.10.1(i) (Physical tests for insulation,inner & outer sheaths-Tensile strength and elongation at break) |
2000.0 |
|
| 5.10.2 (Physical tests for insulation,inner & outer sheaths-Shrinkage Test) |
1000.0 |
|
| 5.10.3 (Physical tests for insulation,inner & outer sheaths-Hot deformation test) |
1000.0 |
|
| 5.10.4 (Physical tests for insulation,inner & outer sheaths-Loss of mass test) |
2000.0 |
|
| 5.10.5 (Physical tests for insulation,inner & outer sheaths-Colour fastness to day-light exposure) |
2000.0 |
|
| 5.10.6 (Physical tests for insulation,inner & outer sheaths-Colour fastness to water) |
1000.0 |
|
| 5.10.7 (Physical tests for insulation,inner & outer sheaths-Bleeding and blooming Test) |
1000.0 |
|
| 5.10.8 (Physical tests for insulation,inner & outer sheaths-Cold bend test) |
2000.0 |
|
| 5.10.9 (Physical tests for insulation,inner & outer sheaths-Cold impact test) |
2000.0 |
|
| 5.10.10 (Physical tests for insulation,inner & outer sheaths-Heat shock test) |
2000.0 |
|
| 5.10.11 (Physical tests for insulation,inner & outer sheaths-Thermal stability test) |
2000.0 |
|
| 5.10.12 (Physical tests for insulation,inner & outer sheaths-Specific Gravity test for PVC) |
1000.0 |
|
| 5.11 (Flammability Test) |
2000.0 |
|
| 5.12 (High Voltage Test) |
3000.0 |
|
| 5.13 (Insulation resistance test) |
2000.0 |
|
| 5.14.1 (Water immersion-AC Test) |
3000.0 |
|
| 5.15 (Visual inspection test-) |
1000.0 |
|
| 5.9 (Test for thickness of insulation and sheath) |
1000.0 |
|
|
| 2317 |
National Test House (WR), Mumbai
| ASTM D 412 - Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers/Tension |
Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers/Tension |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Tensile Strength) |
2000.0 |
|
| - (Elongation (Both directions)) |
2000.0 |
|
|
| 2318 |
National Test House (WR), Mumbai
| IS 1848 : Part 2 (2018) - Writing and printing papers - Specification: Part 2 air mail/manifold, cartridge drawing and cartridge white, duplicating absorbent and duplicating semi - Absorbent and poster machine glazed types (Fifth Revision) |
Writing and printing papers - Specification: Part 2 air mail/manifold, cartridge drawing and cartridge white, duplicating absorbent and duplicating semi - Absorbent and poster machine glazed types (Fifth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.2 (Substance (Grammage),) |
1000.0 |
|
|
| 2319 |
National Test House (NWR), Jaipur
| IS 9926 (1981) - SPECIFICATION FOR FUSE-WIRE USED IN REWIRABLE TYPE ELECTRIC FUSES UP TO 650 VOLTS |
SPECIFICATION FOR FUSE-WIRE USED IN REWIRABLE TYPE ELECTRIC FUSES UP TO 650 VOLTS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 (Visual examination) |
- |
|
| 7.2 (Dimension: Diameter of the Wire) |
1000.0 |
|
| 7.3 (Resistance test: Calculated resistance corrected to 20°C) |
3000.0 |
|
| 7.4 (Persulphate Test) |
2000.0 |
|
|
| 2320 |
National Test House (NWR), Jaipur
| IS 733 (1983 RA 2022) - SPECIFICATION FOR WROUGHT ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS AND SECTIONS
(FOR GENERAL ENGINEERING PURPOSES) |
SPECIFICATION FOR WROUGHT ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS AND SECTIONS
(FOR GENERAL ENGINEERING PURPOSES) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.1.1 a Chemical composition (Aluminium (as Al )content,% by mass) |
3000.0 |
|
| 5.1.1 b Chemical composition (Copper (as Cu)content,% by mass) |
500.0 |
|
| 5.1.1 C Chemical composition (Magnesium(as Mg ) content,% by mass) |
500.0 |
|
| 5.1.1 d Chemical composition (Silicon (as Si) content,% by mass) |
500.0 |
|
| 5.1.1 e Chemical composition (Iron (as Fe) content,% by mass) |
500.0 |
|
| 5.1.1 f Chemical composition (Manganese (as Mn) content,% by mass) |
500.0 |
|
| 5.1.1 g Chemical composition (Zinc (as Zn ) content,% by mass) |
500.0 |
|
| 5.1.1 h Chemical composition (Titanium (as Ti) content,% by mass) |
500.0 |
|
| 5.1.1 i Chemical composition (Chromium (as Cr) content,% by mass) |
500.0 |
|
| 5.1.1 j Chemical composition (Vanadium (as V) content,% by mass) |
500.0 |
|
|
| 2321 |
National Test House (SR), Chennai
| IBR 1950 (2023) - Qualified Boiler Welder's Certificate |
Qualified Boiler Welder's Certificate |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IBR 1950 (Welder qualification) |
4500.0 |
|
| NTH Additional Charges for Testing (Scientist Charges) |
5000.0 |
|
|
| 2322 |
National Test House (WR), Mumbai
| IS 1528 (2010) - Refractory materials |
Refractory materials |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Part 4 (Cold Crushing Strength (as per IS 1528 (Part 4): 2012), in N/mm^2) |
2500.0 |
|
| Part 8 / Part 15 (Apparent Porosity [on the lines of IS 1528 (Part 8)/ IS 1528 (Part 15)], %) |
1000.0 |
|
|
| 2323 |
National Test House (SR), Chennai
| IS 383 for fine aggregate (2016) - Coarse and fine aggregate for Concrete |
Coarse and fine aggregate for Concrete |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Sieve analysis/Particle size distribution ( IS:2386(part -1)1963) |
2000.0 |
|
| 2 (Test for Specific Gravity
(IS:2386(part -III)1963)) |
500.0 |
|
| 3 (Test for Water absorption
(IS:2386(part -III)1963)) |
1000.0 |
|
| 4 (Test for Bulk Density-Loose condition
( IS:2386(part -III)1963)) |
500.0 |
|
| 5 (Test for Bulk Density-Compacted condition
( IS:2386(part -III)1963)) |
500.0 |
|
| 6 (Test for Silt content- (CPWD Specification)) |
1000.0 |
|
| 7 (Deleterious Materials) |
2000.0 |
|
| 5.5 (Soundness of Aggregates [IS 2386 (Part 5)], %) |
2000.0 |
|
| 9 (Test for Alkali aggregate reaction- Chemical method
(IS 2386(Part 7):1963)) |
3000.0 |
|
| 10 (Test for bulking of sand) |
1000.0 |
|
| Clause 5.7 Table 3 (TOTAL ALKALI CONTENT as Na2O EQUIVALENT) |
1000.0 |
|
| 5.7 TABLE 3 (TOTAL SULPHATE CONTENT as SO3) |
1000.0 |
|
| 5.7 TABLE 3 (ACID SOLUBLE CHLORIDE CONTENT) |
1000.0 |
|
| 8 (Test for Soundness of Aggregate (IS 2386(Part 5):1963)) |
2000.0 |
|
| 5.5 (Soundness of Aggregates [IS 2386 (Part 5)], %) |
2000.0 |
|
| 5.5 (Soundness of Aggregates [IS 2386 (Part 5)], %) |
2000.0 |
|
|
| 2324 |
National Test House (NWR), Jaipur
| MORTH 803 Thermoplastic Road Marking Material MORTH-5th Revision 2013 (2013) - Ministry of Road Transport and Highways - Specifications form Road And Bridge Works
803.4.2 |
Ministry of Road Transport and Highways - Specifications form Road And Bridge Works
803.4.2 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 803.4.1.2 (Drying Time) |
1200.0 |
|
| 803.4.1.2 (Titanium Dioxide, as TiO2 % by mass
(BS 3262 (Part 1))) |
1200.0 |
|
| 803.4.1.2 (Binder Content % by mass (BS 3262 (Part 1))) |
1200.0 |
|
| 803.4.1.2 (Colour) |
1200.0 |
|
| 803.4.1.2 (Softening point (BS 3262 (Part 1))
ASTM D 36) |
1200.0 |
|
| 803.4.1.2 (Cracking Resistance (BS 3262 (Part 1))) |
1200.0 |
|
| 803.4.1.2 (Glass Bead content % (BS 3262 (Part 1))) |
1200.0 |
|
| 803.4.1.2 (Calcium carbonate and Inert fillers (BS 3262 (Part 1))) |
1200.0 |
|
| 803.4.2.3 (Roundness) |
1000.0 |
|
| 803.4.2.3 (Free flowing properties) |
500.0 |
|
| 803.4.2.3 (Gradation (Type 2) - below 180 micron(BS 6088)) |
700.0 |
|
| 803.4.2.3 (Gradation (Type 2) - 300 micron (BS 6088)) |
600.0 |
|
| 803.4.2.3 (Gradation (Type 2) - 180 micron (BS 6088)) |
500.0 |
|
| 803.4.2.3 (Gradation (Type 2) - 600 micron (BS 6088)) |
600.0 |
|
| 803.4.2.3 (Gradation (Type 2) - 850 micron (BS 6088)) |
600.0 |
|
| 803.4.2.3 (Gradation (Type 1) - 180 micron (BS 6088)) |
750.0 |
|
| 803.4.2.3 (Gradation (Type 1) - 425 micron (BS 6088)) |
750.0 |
|
| 803.4.2.3 (Gradation (Type 1) - 850 micron (BS 6088)) |
750.0 |
|
| 803.4.2.3 (Gradation (Type 1) 1.18mm (BS 6088)) |
750.0 |
|
| 803.4.2.3 (Appearance) |
500.0 |
|
| 803.4.1.2 (Skid Resistance) |
1000.0 |
|
|
| 2325 |
National Test House (ER), Kolkata
| IS 2645:2003 (RA 2017) - Integral Waterproofing Compounds for Cement Mortar and Concrete-Specification |
Integral Waterproofing Compounds for Cement Mortar and Concrete-Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.2.a. (Setting time -Initial) |
500.0 |
|
| 3.2.b (Setting time-Final) |
500.0 |
|
| 3.3.a (Compressive strength-3 days) |
2000.0 |
|
| 3.3.b (Compressive strength-7 days) |
2000.0 |
|
| 3.4 (Chloride content) |
2000.0 |
|
| - (Appearance) |
1000.0 |
|
| - (Bulk density) |
1000.0 |
|
| - (pH) |
1000.0 |
|
|
| 2326 |
National Test House (SR), Chennai
| CUS/SR/MECH-16 - Nylon Rope |
Nylon Rope |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Breaking load, kN) |
3000.0 |
|
|
| 2327 |
National Test House (NR), Ghaziabad
| IS 11673 : Part 1 (2019) - Sodium hypochlorite solution - Specification: Part 1 household and industrial use (Second Revision) |
Sodium hypochlorite solution - Specification: Part 1 household and industrial use (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.3 (Sodium chlorate ( as NaClO3)) |
1200.0 |
|
| 5.3 (Iron (as Fe)) |
1200.0 |
|
| 5.3 (Free sodium carbonate (as Na2CO3)) |
1200.0 |
|
| 5.3 (Free alkali (as NaOH)) |
1200.0 |
|
| 5.3 (Total chlorine (as Cl)) |
1200.0 |
|
| 5.3 (Available chlorine (as Cl)) |
1200.0 |
|
| 5.3 (Relative density (at 250/250 C)) |
1200.0 |
|
|
| 2328 |
National Test House (ER), Kolkata
| IS 2645 (2003) - Integral waterproofing compounds for cement mortar and concrete - Specification (Second Revision) |
Integral waterproofing compounds for cement mortar and concrete - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.3.b (Compressive Strength-7days) |
2000.0 |
|
| 3.3.a (Compressive Strength-3 days) |
2000.0 |
|
| 3.2.b (Setting Time (Final Setting Time)) |
500.0 |
|
| 3.2.a (Setting Time (Initial Setting Time)) |
500.0 |
|
|
| 2329 |
National Test House (NR), Ghaziabad
| IRS-T-46-2023 (2023) - INDIAN RAILWAY STANDARD SPECIFICATION FOR SPHEROIDAL GRAPHITE CAST IRON INSERTS |
INDIAN RAILWAY STANDARD SPECIFICATION FOR SPHEROIDAL GRAPHITE CAST IRON INSERTS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 2330 |
National Test House (NR), Ghaziabad
| IRS-T-46 (1996) - Indian Railway Standard Specification for Spheroidal Graphite Cast Iron Inserts |
Indian Railway Standard Specification for Spheroidal Graphite Cast Iron Inserts |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 2331 |
National Test House (NR), Ghaziabad
| IS 6006 (2014) - Uncoated stress relieved strand for prestressed concrete - Specification (Second Revision) |
Uncoated stress relieved strand for prestressed concrete - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.3 (3- Ply 3mm strand: Elongation) |
1000.0 |
|
| 7.2 (3- Ply 3mm strand: 0.2% Proof Load) |
1000.0 |
|
| 7.1 (3- Ply 3mm strand: Breaking Load, kN) |
3000.0 |
|
| 5.1 (Nominal Mass 3- Ply 3mm strand) |
1000.0 |
|
| 5.1 (Nominal Area 3- Ply 3mm strand) |
500.0 |
|
| 5.1 (Dimension 3- Ply 3mm strand: Nominal Diameter of element wire) |
500.0 |
|
| 4.2 (Length of lay of 3- Ply 3mm strand: 24-36 time of dia of element wire) |
1000.0 |
|
| 3.1.2 (Sulphur, % by mass.) |
750.0 |
|
| 3.1.2 (Phosphorus, % by mass) |
750.0 |
|
| 3.1.2 (Carbon, % by mass.) |
625.0 |
|
|
| 2332 |
National Test House (NR), Ghaziabad
| IRS T-46 (1996) - Indian Railway Standard Specification For Spheroidal Graphite Cast Iron Inserts |
Indian Railway Standard Specification For Spheroidal Graphite Cast Iron Inserts |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 13 (Weight) |
1000.0 |
|
| 12 (Dimensions) |
1000.0 |
|
| 11.7 (Internal Soundness) |
1000.0 |
|
| 11.6 (Micro Structure) |
2000.0 |
|
| 11.5 (Brinell Hardness) |
2000.0 |
|
| 11.4 (Elongation) |
3000.0 |
|
| 11.4 (Tensile Strength) |
3000.0 |
|
| 11.2 (Chemical Composition) |
2500.0 |
|
|
| 2333 |
National Test House (ER), Kolkata
| JIS D 5302-2004 - Lead Acid Batteries for Motorcycles |
Lead Acid Batteries for Motorcycles |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8.3.2 (Capacity (10 hour rate)) |
25000.0 |
|
| 8.3.3 (High Rate Discharge test) |
15000.0 |
|
| 8.3.4 (Vibration resistance) |
20000.0 |
|
| Reference 1 (Deep Cycle Endurance) |
60000.0 |
|
| Reference 2 (Shallow Cycle Endurance) |
60000.0 |
|
| Reference 3 (Characteristics of Electrolyte Decrease) |
30000.0 |
|
| Reference 4 (Charge Retention test) |
20000.0 |
|
| 8.3.1 (Dimensions) |
1000.0 |
|
|
| 2334 |
National Test House (ER), Kolkata
| JISC 8702 : 2009 - Small- sized valve regulated lead-acid batteries |
Small- sized valve regulated lead-acid batteries |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 of JISC 8702-2:2009 (Dimensions) |
500.0 |
|
| 5.1 of JISC 8702-1:2009 (Capacity at 20 hr rate) |
20000.0 |
|
| 5.2 of JISC 8702-1:2009 (High rate discharge characteristics) |
20000.0 |
|
| 5.3 of JISC 8702-1:2009 (Cycle service Endurance) |
200000.0 |
|
| 5.4 of JISC 8702-1:2009 (Storage characteristic Test) |
20000.0 |
|
| 5.5 of JISC 8702-1:2009 (Maximum permissible current Characteristic) |
15000.0 |
|
| 5.6 of JISC 8702-1:2009 (Charge Acceptance characteristic after deep discharge.) |
15000.0 |
|
| 5.7 of JISC 8702-1:2009 (Endurance in Trickle application) |
100000.0 |
|
| 5.8 of JISC 8702-1:2009 (Endurance in trickle application at 40 Deg C) |
130000.0 |
|
| 5.9.a of JISC 8702-1:2009 (Gas Emission Intensity I) |
15000.0 |
|
| 5.10.a of JISC 8702-1:2009 (Gas recombinating characteristic - operation of vent valve) |
15000.0 |
|
| 5.11 of JISC 8702-1:2009 (Vibration Resistance Characteristics) |
15000.0 |
|
| 7.12 of JISC 8702-1:2009 (Shock Resistance Characteristics) |
15000.0 |
|
| 7.1.b (Actual Capacity at the 1 hour discharge rate) |
20000.0 |
|
| 5.10.b of JISC 8702-1:2009 (Gas recombinating characteristic - Liquid leakage resistance characteristics) |
15000.0 |
|
| 5.9.b of JISC 8702-1:2009 (Gas emission intensity II) |
15000.0 |
|
|
| 2335 |
National Test House (ER), Kolkata
| CQAL/637 :2006 - SPECIFICATION FOR BATTERY SECONDARY, LEAD ACID, LOW MAINTENANCE FOR MT PURPOSES |
SPECIFICATION FOR BATTERY SECONDARY, LEAD ACID, LOW MAINTENANCE FOR MT PURPOSES |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 15.1 (Visual Examination) |
1000.0 |
|
| 15.2 (Physical Examination) |
1000.0 |
|
| 15.3 (Dimensions and Layout) |
1000.0 |
|
| 15.4 (Marking) |
1000.0 |
|
| 15.5 (Capacity (5-h rate)) |
5000.0 |
|
| 15.6.1 (High Rate Discharge at -15 degree C) |
10000.0 |
|
| 15.6.3 (High Rate Discharge at Normal Temperature) |
15000.0 |
|
| 15.7 (Robustness of Handle) |
5000.0 |
|
| 15.8 (Charge Acceptance) |
15000.0 |
|
| 15.9 (Air Pressure Test) |
10000.0 |
|
| 15.10 (Life Cycle test) |
100000.0 |
|
| 15.11 (Vibration Resistance) |
10000.0 |
|
| 15.12 (Over Charge Endurance) |
20000.0 |
|
| 15.13 (Strength of Terminal) |
5000.0 |
|
| 15.14 (Robustness to Fastening) |
5000.0 |
|
| 15.15 (Test for Dry Charged Battery) |
10000.0 |
|
| 15.16 (High Voltage Test) |
5000.0 |
|
| 15.17 (Retention of Charge) |
15000.0 |
|
| 15.18 (Electrolyte Retention test) |
5000.0 |
|
|
| 2336 |
National Test House (ER), Kolkata
| RDSO SPECIFICATION No. M&C/PCN/123/2018 (2018) - SPECIFICATION FOR HIGH PERFORM ANTI-CORROSION EPOXY COATING (TWO PACK) |
SPECIFICATION FOR HIGH PERFORM ANTI-CORROSION EPOXY COATING (TWO PACK) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 2337 |
National Test House (ER), Kolkata
| RDSO M&C/ PCN/ 100/ 2018 (2018) - Specification for Epoxy Cum Polyurethane Painting System (Two Pack) for the Exterior Painting of Railway Coaches |
Specification for Epoxy Cum Polyurethane Painting System (Two Pack) for the Exterior Painting of Railway Coaches |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Chapter V (Table 1) (Viscosity (Efflux time by Ford cup No. 4 ) at 27 degree C) |
1200.0 |
|
| Chapter V (Table 1) (Fineness of grind) |
1200.0 |
|
| Chapter V (Table 1) (Theoretical Spreading rate) |
1200.0 |
|
| Chapter V (Table 1) (Pot life(After induction time)ii) 40 ± 2 Deg C) |
2000.0 |
|
| Chapter V (Table 1) (Pot life (After induction time) at i) 27 ± 2 Deg C) |
1500.0 |
|
| Chapter V (Table 1) (Abrasion resistance-1000 cycles) |
3000.0 |
|
| Chapter V (Table 1) (Humidity test.) |
11000.0 |
|
| Chapter V (Table 1) (Durability Tests : Accelerated weathering test) |
110000.0 |
|
| Chapter V (Table 1) (Accelerated Tests Resistance to water) |
1500.0 |
|
| Chapter V (Table 1) (Accelerated Tests Resistance to solvents) |
1500.0 |
|
| Chapter V (Table 1) (Accelerated Tests Resistance to oil) |
1500.0 |
|
| Chapter V (Table 1) (Accelerated Tests Resistance to 20% caustic potash (weight by volume)) |
1500.0 |
|
| Chapter V (Table 1) (Accelerated Tests (a) Resistance to 30% Sulphuric acid (weight by volume)) |
1500.0 |
|
| Chapter V (Table 1) (poly isocyanate, in hardener) |
3000.0 |
|
| Chapter V (Table 1) (Unreacted monomer) |
3000.0 |
|
| Chapter V (Table 1) (Gloss at 60 degree angle of incidence) |
1200.0 |
|
| Chapter V (Table 1) (Mass in Kg/10 litres) |
1200.0 |
|
| Chapter V (Table 1) (Keeping Properties for both the packs) |
5000.0 |
|
| Chapter V (Table 1) (Flash Point (b) Component B) |
1200.0 |
|
| Chapter V (Table 1) (Flash Point (a) Component A) |
1200.0 |
|
| Chapter V (Table 1) (Flexibility & Adhesion (6.25mm mandrel)) |
1200.0 |
|
| Chapter V (Table 1) (Scratch hardness (1.5 Kg LOAD)) |
1200.0 |
|
| Chapter V (Table 1) (Volume solids) |
1200.0 |
|
| Chapter V (Table 1) (Dry film thickness/Per coat) |
1200.0 |
|
| Chapter V (Table 1) (Colour) |
1200.0 |
|
| Chapter V (Table 1) (Finish) |
1200.0 |
|
| Chapter V (Table 1) (Consistency) |
1200.0 |
|
| Chapter V (Table 1) (Drying time c) Hard Dry at 70 Deg C) |
1200.0 |
|
| Chapter V (Table 1) (Drying time b) Hard Dry) |
1200.0 |
|
| Chapter V (Table 1) (Drying time a) Surface Dry) |
1200.0 |
|
| Chapter V (Table 1) (Identification of polyisocyanates) |
3000.0 |
|
| Chapter II/Cl. 4.1 (Protection against corrosion under condition of condensation) |
9000.0 |
|
| Chapter II/Cl. 4.1 (Resistance to salt spray) |
21000.0 |
|
|
| 2338 |
National Test House (SR), Chennai
| Industrial Training - Industrial Training - Electrical Laboratory |
Industrial Training - Electrical Laboratory |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Industrial Training - Electrical Laboratory) |
1.0 |
|
|
| 2339 |
National Test House (ER), Kolkata
| NTHER- Calibration of High Current Source (V/I Method) More than 100A - Calibration of High Current Source (V/I Method) More than 100A |
Calibration of High Current Source (V/I Method) More than 100A |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| A.1 (Calibration of High Current Source (V/I Method) up to 500A (ac or dc)) |
4500.0 |
|
| A.2 (Calibration of High Current Source (V/I Method) up to 800A (ac or dc)) |
5000.0 |
|
| A.3 (Calibration of High Current Source (V/I Method) up to 1000A (ac or dc)) |
6000.0 |
|
|
| 2340 |
National Test House (ER), Kolkata
| ETI/OHE/50(6/97) re-designated to TI/SPC/OHE/CAT(Cu-Cd)/0971 (2021) - Technical specification for Cadmium copper conductors for over head Electric Traction |
Technical specification for Cadmium copper conductors for over head Electric Traction |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8.2.1 (Visual examination) |
1000.0 |
|
| 8.2.2 (Chemical composition) |
2000.0 |
|
| 8.2.3 (Measurement of diameter of individual wire and stranded conductor) |
2000.0 |
|
| 8.2.4 (Measurement of weight of wire and conductor) |
2000.0 |
|
| 8.2.5 (Measurement of lay length and lay ratio of each layer of stranded conductor) |
5000.0 |
|
| 8.2.6 (Measurement of Electrical resistance of wire and stranded conductor) |
15000.0 |
|
| 8.2.7 (Tensile test on wires) |
32000.0 |
|
| 8.2.8 (Wrapping test on wires) |
5000.0 |
|
|
