| 2281 |
National Test House (NR), Ghaziabad
| RDSO TI/SPC/PSI/ISOLTR/0210 (July 2021) - RDSO Technical Specification For Motorised / Manual Operated Isolators. |
RDSO Technical Specification For Motorised / Manual Operated Isolators. |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.8 (Wet Power Frequency Withstand Test as per IS : 2071 (Part 1 & 2)) |
20000.0 |
|
| 7.9 (Lightning Impulse Voltage Test as per IS : 2071 (Part-1)) |
60000.0 |
|
|
| 2282 |
National Test House (ER), Kolkata
| CUSTOM/EAR TAG/2022 (2022) - CUSTOM/EAR TAG/2022 |
CUSTOM/EAR TAG/2022 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Pull Test Force) |
2000.0 |
|
| 2.0 (Material Identification) |
5000.0 |
|
| 3.0 (Weight of Male BTM and Female Tag) |
2000.0 |
|
| 4.0 (Dimension of Tag(Male & female)) |
1000.0 |
|
|
| 2283 |
National Test House (WR), Mumbai
| Custom IS / ASTM - Testing on coating Materials to be used with cement / concrete |
Testing on coating Materials to be used with cement / concrete |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IS 2770 (Pull out Test [IS 2770 (Part 1)], % increase with respect to plain bar.) |
10000.0 |
|
| ASTM D 4541 (Pull off Adhesion Test (ASTM D 4541 - 2009),
Pull off Adhesion Strength against concrete, MPa) |
5000.0 |
|
|
| 2284 |
National Test House (ER), Kolkata
| NTHER-Calibration of Digital DC Power Supply - NTHER-Calibration of Digital DC Power Supply |
NTHER-Calibration of Digital DC Power Supply |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| A1 (Calibration of Digital DC Power Supply upto 100V,150A) |
5000.0 |
|
| A2 (Calibration of Digital DC Power Supply upto 100V,20A) |
2500.0 |
|
| A3 (Calibration of Digital DC Power Supply upto 50V,40A) |
3500.0 |
|
| A4 (Calibration of Digital DC Power Supply upto 40V,25A) |
3000.0 |
|
|
| 2285 |
National Test House (ER), Kolkata
| NTHER-Calibration of Programmable DC Electronics Load - NTHER-Calibration of Programmable DC Electronics Load |
NTHER-Calibration of Programmable DC Electronics Load |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| A1 (NTHER-Calibration of Programmable DC Electronics Load) |
4000.0 |
|
|
| 2286 |
National Test House (ER), Kolkata
| NTHER-Calibration of Data Acquisition Chart Recorder - NTHER-Calibration of Data Acquisition Chart Recorder |
NTHER-Calibration of Data Acquisition Chart Recorder |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| A1 (NTHER-Calibration of Data Acquisition Chart Recorder (32 Channel)) |
5000.0 |
|
| A2 (NTHER-Calibration of Data Acquisition Chart Recorder (16 Channel)) |
4000.0 |
|
| A3 (NTHER-Calibration of Data Acquisition Chart Recorder (8 Channel)) |
3000.0 |
|
|
| 2287 |
National Test House (ER), Kolkata
| IRS-T-46-2023 (2023) - INDIAN RAILWAY STANDARD SPECIFICATION FOR SPHEROIDAL GRAPHITE CAST IRON INSERTS |
INDIAN RAILWAY STANDARD SPECIFICATION FOR SPHEROIDAL GRAPHITE CAST IRON INSERTS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.5 (Carbon (C)) |
500.0 |
|
| 7.5 (Manganese (Mn)) |
500.0 |
|
| 11.2 (Phosphorus (P)) |
500.0 |
|
| 7.5 (Sulphur (S)) |
500.0 |
|
| 7.5 (Silicon (Si)) |
500.0 |
|
| 11.4 (Tensile Strength) |
2000.0 |
|
| 11.4 (% Elongation) |
1000.0 |
|
| 11.5 (Brinell Hardness) |
2000.0 |
|
| 11.6 (Microstructure) |
3000.0 |
|
| 13 (Weight) |
1000.0 |
|
| 11.2 (Tin (Sn)) |
500.0 |
|
| 11.2 (Copper (Cu)) |
500.0 |
|
|
| 2288 |
National Test House (ER), Kolkata
| IRS T-46 (1996) - Indian Railway Standard Specification For Spheroidal Graphite Cast Iron Inserts |
Indian Railway Standard Specification For Spheroidal Graphite Cast Iron Inserts |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 13 (Weight) |
1000.0 |
|
| 12 (Dimensions) |
1000.0 |
|
| 11.7 (Internal Soundness) |
1000.0 |
|
| 11.6 (Micro Structure) |
2000.0 |
|
| 11.5 (Brinell Hardness) |
2000.0 |
|
| 11.4 (Elongation) |
3000.0 |
|
| 11.4 (Tensile Strength) |
3000.0 |
|
| 11.2 (Chemical Composition) |
2500.0 |
|
|
| 2289 |
National Test House (SR), Chennai
| IS 17545: 2021 (2021) - WHITE CEMENT BASED POLYMERIC PUTTY |
WHITE CEMENT BASED POLYMERIC PUTTY |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.5 Table 1(iii) (Initial Setting time-Annex D in minutes) |
200.0 |
|
| 4.5 Table 1(iii) (Final Setting time-Annex D
in minutes) |
200.0 |
|
| 4.6 Optional requirement (Compressive strength, 28 days in N/mm2
(IS 4031 (Part 6))) |
3000.0 |
|
|
| 2290 |
National Test House (NR), Ghaziabad
| NTH/NR/CHEM/CUST-02 ASTME 119/BS 476 (As per Pt: 20 and 24) - As per Customer Requirement |
As per Customer Requirement |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (As per Customer Requirement (Please see Annexure)) |
10000.0 |
|
|
| 2291 |
National Test House (WR), Mumbai
| NTH(WR)/MECH/CUSTOM/005 (2023) - Custom Specification for HSFG Bolt, Nut and Washer |
Custom Specification for HSFG Bolt, Nut and Washer |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 16 (Chemical Composition of HSFG Bolts) |
5000.0 |
|
| 17 (Chemical Composition of HSFG Nuts) |
5000.0 |
|
| 18 (Chemical Composition of HSFG Washers) |
5000.0 |
|
| 1 (Visual Examination as per IS 1367 Part 3 or Relevant Standard or Custom Spec.) |
1000.0 |
|
| 2 (Dimensions as per IS 1367 Part 3 or Relevant Standard or Custom Spec.) |
1000.0 |
|
| 3 (Hardness test as per IS 1367 Part 3 or Relevant Standard or Custom Spec.) |
3000.0 |
|
| 4 (Yield Strength as per IS 1367 Part 3 or Relevant Standard or Custom Spec.) |
1000.0 |
|
| 5 (Tensile Strength as per IS 1367 Part 3 or Relevant Standard or Custom Spec.) |
1000.0 |
|
| 6 (Percentage of Elongation as per IS 1367 Part 3 or Relevant Standard or Custom Spec.) |
1000.0 |
|
| 7 (Proof Load as per IS 1367 Part 3 or Relevant Standard or Custom Spec.) |
3000.0 |
|
| 8 (Visual Examination as per IS 6649-1985 or Relevant Standard or Custom Spec.) |
1000.0 |
|
| 9 (Dimensions as per IS 6649-1985 or Relevant Standard or Custom Spec.) |
1000.0 |
|
| 10 (Hardness as per IS 6649-1985 or Relevant Standard or Custom Spec.) |
2000.0 |
|
| 11 (General Requirements as per IS 6649-1985 or Relevant Standard or Custom Spec.) |
2000.0 |
|
| 12 (Visual Examination Dimensions as per IS 6623-2004 or Relevant Standard or Custom Spec.) |
1000.0 |
|
| 13 (Dimensions as per IS 6623-2004 or Relevant Standard or Custom Spec.) |
1000.0 |
|
| 14 (Hardness as per IS 6623-2004 or Relevant Standard or Custom Spec.) |
2000.0 |
|
| 15 (Torque Test as per IS 1367 Part 3 or Relevant Standard or Custom Spec.) |
2000.0 |
|
|
| 2292 |
National Test House (ER), Kolkata
| ISO 683-17 (2014) - Heat-treated steels, alloy steels and free-cutting steels —Ball and roller bearing steels |
Heat-treated steels, alloy steels and free-cutting steels —Ball and roller bearing steels |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1.2 (Carbon) |
500.0 |
|
| 7.1.2 (Silicon) |
500.0 |
|
| 7.1.2 (Manganese) |
500.0 |
|
| 7.1.2 (Phosphorus) |
500.0 |
|
| 7.1.2 (Sulphur) |
500.0 |
|
| 7.1.2 (Chromium) |
500.0 |
|
| 7.1.2 (Molybdenum) |
500.0 |
|
| 7.1.2 (Copper) |
500.0 |
|
| 7.1.2 (Aluminium) |
500.0 |
|
| 7.1.2 (Nickel) |
500.0 |
|
| 7.1.2 (Vanadium) |
500.0 |
|
| 7.1.2 (Lead) |
500.0 |
|
| 7.1.4 (Hardness) |
2000.0 |
|
| 7.5.1 (Visual Inspection) |
1000.0 |
|
|
| 2293 |
National Test House (NR), Ghaziabad
| 3025 - Customised specification for drinking water. |
Customised specification for drinking water. |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| v (TDS) |
1200.0 |
|
|
| 2294 |
National Test House (SR), Chennai
| IS 1264 (1997) - Brass gravity die castings - Specification (Fourth Revision) |
Brass gravity die castings - Specification (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 Table 1 (Copper) |
1000.0 |
|
| 7.1 Table 1 (Tin) |
500.0 |
|
| 7.1 Table 1 (Lead) |
500.0 |
|
| 7.1 Table 1 (Nickel) |
500.0 |
|
| 7.1 Table 1 (Iron) |
500.0 |
|
| 7.1 Table 1 (Aluminium) |
500.0 |
|
| 7.1 Table 1 (Manganese) |
500.0 |
|
| 7.1 Table 1 (Silicon) |
500.0 |
|
| 7.1 Table 1 (Total Impurities (excluding Ni+Pb+Al)) |
500.0 |
|
| 7.1 Table 1 (Zinc) |
1000.0 |
|
|
| 2295 |
National Test House (SR), Chennai
| ASTM - A276/A276M (2010) - Standard Specification for Stainless Steel Bars and Shapes |
Standard Specification for Stainless Steel Bars and Shapes |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table 1 (Carbon) |
1000.0 |
|
| Table 1 (Manganese) |
1000.0 |
|
| Table 1 (Phosphorus) |
1000.0 |
|
| Table 1 (Sulfur) |
1000.0 |
|
| Table 1 (Silicon) |
1000.0 |
|
| Table 1 (Chromium) |
1000.0 |
|
| Table 1 (Nickel) |
1000.0 |
|
| Table 1 (Molybdenum) |
1000.0 |
|
|
| 2296 |
National Test House (NWR), Jaipur
| Custom for ISO:4427 (2007) - Polyethylene (PE) pipes and fittings for water supply |
Polyethylene (PE) pipes and fittings for water supply |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.1 (5.1 of ISO:4427) |
1000.0 |
|
| 8.2 Table-5 (8.2 Table-5 of ISO:4427) |
3000.0 |
|
| 6.2 (6.2 of ISO:4427) |
1000.0 |
|
| 6.2 (6.2 of ISO:4427) |
1000.0 |
|
| 6.3 (6.3 of ISO:4427) |
1000.0 |
|
| 6.3 (6.3 of ISO:4427) |
1000.0 |
|
| 7.2 (7.2 table-3 of ISO:4427) |
5000.0 |
|
| 8.2 (8.2 table-5 of ISO:4427) |
1500.0 |
|
| 8.2 (8.2 Table-5 of ISO:4427) |
1500.0 |
|
| 8.2 (8.2 Table-5 of ISO:4427) |
2000.0 |
|
|
| 2297 |
National Test House (ER), Kolkata
| RCF Spec. No. EDTS-163,Rev. C - RCF Spec. No. EDTS-163,Rev. C |
RCF Spec. No. EDTS-163,Rev. C |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.4.c (IP Protection Test) |
15000.0 |
|
| 7.4.f (Vibration and shock test) |
70000.0 |
|
| 7.4.f (Impact Test) |
15000.0 |
|
|
| 2298 |
National Test House (ER), Kolkata
| NTHER-Calibration of HV Probe - NTHER-Calibration of HV Probe |
NTHER-Calibration of HV Probe |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| A1 (NTHER-Calibration of HV Probe upto 40 kV) |
4000.0 |
|
| A2 (NTHER-Calibration of HV Probe upto 80 kV) |
7000.0 |
|
|
| 2299 |
National Test House (ER), Kolkata
| Custom: Bright bar |
- |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Carbon % by mass) |
1200.0 |
|
| 2 (Silicon % by mass) |
1200.0 |
|
| 3 (Manganese % by mass) |
1200.0 |
|
| 4 (Sulphur % by mass) |
1200.0 |
|
| 5 (Phosphorus % by mass) |
1200.0 |
|
| 6 (Lead % by mass) |
1200.0 |
|
|
| 2300 |
National Test House (ER), Kolkata
| AWWA C210-15 (2015) - Solvent Free Liquid epoxy Coating (Red / Grey) for steel Water pipeline &Fittings Internal |
Solvent Free Liquid epoxy Coating (Red / Grey) for steel Water pipeline &Fittings Internal |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table 1 Prequalification Requirements a) (Immersion and vapour resistance test for 30 days in:
1. Deionized Water
(ANSI/ AWWA C 210-2015 Clause No. 5.2.1.1--ASTM D 6943)) |
3000.0 |
|
| Table 1 Prequalification Requirements b) (Immersion and vapour resistance test for 30 days in:
2. Sulphuric Acid,1% by weight
ANSI/ AWWA C 210-2015 Clause No. 5.2.1.1-ASTM D 6943) |
3000.0 |
|
| Table 1 Prequalification Requirements c) (Immersion and vapour resistance test for 30 days in:
3.Sodium Hydroxide, 1% by weight
ANSI/ AWWA C 210-2015 Clause No. 5.2.1.1-ASTM D 6943) |
3000.0 |
|
| Table 1 2 Prequalification Requirements (Cathodic disbondment test, 28 days, -1.5V
AWWA C 210 Clause No. 5.2.1.2 /*ASTM G 8) |
5000.0 |
|
| Table 1 3.Prequalification Requirements (Dielectric Strength
AWWA C 210-2015 Clause No. 5.2.1.3/ASTM D 149) |
10000.0 |
|
| Quality Control Requirements Table 2 1 (Appearance
AWWA C 210-2015 Clause No. 5.5.1) |
100.0 |
|
| Quality Control Requirements .2 Table 2 (Cure test
AWWA C 210-2015 Clause No. 5.5.2/ASTM D 5402) |
1000.0 |
|
| Quality Control Requirements 3 Table 2 (Dry Film Thickness
AWWA C 210-2015 Clause No. 5.5.3) |
1000.0 |
|
| Quality Control Requirements 4 Table 2 (Adhesion to steel (Pull Adhesion to steel (Pull Off Adhesion test)
ASTM D 4541) |
5000.0 |
|
| Quality Control Requirements 5. Table 2 (Electrical Continuity Inspection / (Pin-hole detector @ 2.5 KV)) |
5000.0 |
|
| Quality Control Requirements (Abrasion resistance - 'Abrasion resistance of organic coatings by the Taber Abraser" - 1 kg load / 1000 cycles CS 17 wheel or CS 10 wheel
ASTM D4060) |
5000.0 |
|
| Quality Control Requirements (Shore D hardness "ASTM D2240 ") |
1200.0 |
|
| Quality Control Requirements (Compressive Strength
"ASTM C109 ") |
5000.0 |
|
| ADD PARAMETER 1 (Potable Water Service test a)PH
on the lines of IS 10500) |
1000.0 |
|
| additional parameter (Potable Water Service test b)Turbidity
on the lines of IS 10500) |
1000.0 |
|
| additional parameter (Potable Water Service test d)Chloride
on the lines of IS 10500) |
1000.0 |
|
| additional parameter (Potable Water Service test c)Total hardness
on the lines of IS 10500) |
1000.0 |
|
| additional parameter (Potable Water Service test e)Nitrate
on the lines of IS 10500) |
1000.0 |
|
| additional parameter (Potable Water Service test f)Iron
on the lines of IS 10500) |
1000.0 |
|
| additional parameter (Potable Water Service test g)Arsenic
on the lines of IS 10500) |
1000.0 |
|
| additional parameter (Potable Water Service test h)Fluoride
on the lines of IS 10500) |
1000.0 |
|
| 1.1 (Specific Gravity
(after Mixing Comp A+ Comp B)) |
1000.0 |
|
| additional parameter (Abrasion Resistance
1560Cycle/mill as per ASTM D4060) |
5000.0 |
|
| additional parameter (Adhesion to steel) |
1200.0 |
|
|
| 2301 |
National Test House (WR), Mumbai
| 2933 (Part 1) (2013) - Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications |
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Lead Restriction, (IS 101 (Part 8/Sec 5)) |
700.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (a) Consistency, (Annex C)) |
1000.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (b) Viscosity by ford cup No. 4 at (27 +/- 2 deg C), (IS 101 (Part 1/Sec 5))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Mass, kg/10 litre, Min, (IS 101 (Part 1/Sec 7))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Drying time, h, Max : a) Surface dry (IS 101 (Part 3/Sec 1))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Drying time, h, Max : b) Hard dry (IS 101 (Part 3/Sec 1))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Drying time, h, Max : c) Tack free (IS 101 (Part 3/Sec 1))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Wet opacity, Min, (IS 101 (Part 4/Sec 1))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Finish, (IS 101 (Part 3/Sec 4))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Fineness of grind, Max (IS 101 (Part 3/Sec 5))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Colour, (IS 101 (Part 4/Sec 2))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Water content (if water is suspected to be present), Max, (IS 101 (Part 2/Sec 1))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Flexibility and adhesion: a) Scratch hardness, (Load 1000 g), clause 3 of (IS 101 (Part 5/Sec 2))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Flexibility and adhesion: b) Bend test, (with 6.25 mm Dia Mandrel in type 1 apparatus), clause 2 of (IS 101 (Part 5/Sec 2))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Striping test (Annex D)) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Flash Point, (IS 101 (Part 1/Sec 6))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Keeping properties , (IS 101 (Part 6/Sec 2))) |
5000.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Durability: Accelerated Weathering test (Xenon arc ) (clause no. 6.2 of IS 2933 (Part 1))) |
21600.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Durability: Normal Outdoor Exposure test for 12 Months (Annex B-3)) |
10000.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Total non-volatile matter, (IS 101 (Part 8/Sec 2))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Total pigment content) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Phthalic anhydride content of the non-volatile vehicle, (IS 101 (Part 8/Sec 4))) |
500.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Please refer annexure) |
1.0 |
|
| Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Gloss (specular 60 deg), (IS 101 (Part 4/Sec 4))) |
500.0 |
|
|
| 2302 |
National Test House (SR), Chennai
| IS/IEC60947-1 - Low-voltage switchgear and control gear - Part 1: General rules |
Low-voltage switchgear and control gear - Part 1: General rules |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.2.3 & 8.3.3.4 (The dielectric test (Power frequency withstand Test)) |
5000.0 |
|
| 8.3.3.3 (Temperature-rise limits of terminals - Table 2 as per IS/IEC 60947 -Part-1:2004) |
25000.0 |
|
| 10 (Marking) |
- |
|
|
| 2303 |
National Test House (SR), Chennai
| IS/IEC 60898 : PART 1 - Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations : Part 1 Circuit-breakers for ac operation (SP,SPN,DP,3P & 4P upto 63A) |
Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations : Part 1 Circuit-breakers for ac operation (SP,SPN,DP,3P & 4P upto 63A) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 2304 |
National Test House (SR), Chennai
| 1542 (1992) - Sand for Plastering |
Sand for Plastering |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Grading of Sand, (IS 2386 Part 1))) |
2000.0 |
|
| 4.4 (Compressive Strength (IS Appendix A of IS 2250), N/mm^2) |
2000.0 |
|
| 5.2 (Fineness Modulus of sand (IS 2386 (Part 1) from gradation)) |
500.0 |
|
| 4.4.1 (Water Required for Gauging (IS 1727 cl 9.5.3), %) |
1000.0 |
|
| 4.2 (Deleterious Materials, General observation (presence of iron pyrites, alkalies, salts, coal, mica, shale etc. - IS 2386)) |
1000.0 |
|
| 4.3 (Deleterious Materials, (a) Clay, Silt and Dust as per IS 2386 (Part 2) and (b) Organic impurities as per IS 2386 (Part -2 )) |
2000.0 |
|
| 6.2 (Bulk density-loose) |
500.0 |
|
| 6.2 (Bulk density-Compacted) |
500.0 |
|
| 6.2 (Water absorption) |
1000.0 |
|
| 6.2 (Specific gravity) |
500.0 |
|
| 4.1 (General - Visual Observation.) |
500.0 |
|
| custom (Materials finer than 75 microns IS sieve) |
1000.0 |
|
|
| 2305 |
National Test House (WR), Mumbai
| IS 14333 - High Density Polyethylene Pipe For Sewerage - |
High Density Polyethylene Pipe For Sewerage - |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8.4 (Melt Flow Rate (IS:14333 & IS:2530)) |
2000.0 |
|
| 8.2 (Reversion Test (IS:14333 & IS:4984)) |
1000.0 |
|
| 7.4 (Outside Diameter (IS:14333 & IS:4984)) |
500.0 |
|
| 7.4 (Wall Thickness (IS:14333 & IS:4984)) |
500.0 |
|
| 8.5 (Carbon Black Content and Dispersion) |
2000.0 |
|
| 8.6 (Density (IS:14333 & IS:7328)) |
2000.0 |
|
|
| 2306 |
National Test House (SR), Chennai
| CUS/SR/MECH-17 - Aluminium composite panel |
Aluminium composite panel |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Total Thickness, mm) |
1000.0 |
|
| 2.0 (Breaking load) |
3000.0 |
|
| 3.0 (Panel Thickness) |
1000.0 |
|
| 4.0 (Weight, kg/m²) |
1000.0 |
|
| 5.0 (Tensile strength, N/mm² (on the lines of IS 1608)) |
1000.0 |
|
| 6.0 (Yield strength, N/mm² (on the lines of IS 1608)) |
1000.0 |
|
| 7.0 (Percentage Elongation, % (on the lines of IS 1608)) |
1000.0 |
|
|
| 2307 |
National Test House (SR), Chennai
| RDSO IRS S 63/2015 : Part 1 : Sec Revision 4 (2014) - PVC Insulated,underground, unscreened cable for Railway Signalling |
PVC Insulated,underground, unscreened cable for Railway Signalling |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 () |
- |
|
|
| 2308 |
National Test House (SR), Chennai
| RDSO IRS S 63/2014 : Part 0 : Sec Revision 4 (2014) - PVC Insulated,underground, unscreened cable for Railway Signalling |
PVC Insulated,underground, unscreened cable for Railway Signalling |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.1 (Conductor) |
100.0 |
|
| 3.2.1 (Insulation ) |
100.0 |
|
| 3.2.3 (Insulation ) |
100.0 |
|
| 3.2.4 (Insulation ) |
250.0 |
|
| 3.2.5 (Core identification) |
100.0 |
|
| 3.3.1 (LAYING UP (for power cable only)) |
100.0 |
|
| 3.2.5 (Core identification) |
100.0 |
|
| 3.4.1 (Inner Sheath) |
100.0 |
|
| 3.5.1 (Armouring) |
100.0 |
|
| 3.5.2 (Armouring (Applicable for power cable only)) |
100.0 |
|
| 3.6.1 (OUTER SHEATH) |
100.0 |
|
| 4.1 (Marking) |
100.0 |
|
| 5.2 (a) (Dimensions) |
1000.0 |
|
| 5.2 (a) (Elongation of annealed copper) |
1000.0 |
|
| 5.2 (b) (Conductor resistance ) |
2000.0 |
|
| 5.2 (c) (Dimensions of Armour Wires) |
1000.0 |
|
| 5.3 (c) (Tensile Strength ) |
1000.0 |
|
| 5.2 (c) (Elongation ) |
1000.0 |
|
| 5.2 (c) (Torsion test) |
1000.0 |
|
| 5.2 (c) (Winding test ) |
1000.0 |
|
| 5.2 (c) (Mass of Zinc coating test) |
1000.0 |
|
| 5.2 (c) (Uniformity of Zinc coating) |
1000.0 |
|
| 5.2 (c) (Resistivity test.) |
1500.0 |
|
| 5.2 (c) (closeness of armour tape) |
100.0 |
|
| 5.2 (d) (Thickness of insulation ) |
500.0 |
|
| 5.2 (d) (Thickness of insulation minimum ) |
500.0 |
|
| 5.2 (d) (Thickness of Outer sheath ) |
500.0 |
|
| 5.2 (d) (Thickness of inner sheath ) |
500.0 |
|
| Cl. 5.2(e)) (Tensile Strength of insulation) |
500.0 |
|
| Cl. 5.2(e) (Tensile Strength of inner sheath) |
500.0 |
|
| Cl. 5.2(e) (Tensile Strength of outer sheath) |
500.0 |
|
| Cl. 5.2(e) (Elongation of insulation) |
500.0 |
|
| Cl. 5.2(e) (Elongation of inner sheath) |
500.0 |
|
| Cl. 5.2(e) (Elongation of outer sheath) |
500.0 |
|
| Cl. 5.2(e) (Tensile strength Insulation variation ) |
500.0 |
|
| Cl. 5.2(e) (Tensile strength inner sheath variation ) |
500.0 |
|
| Cl. 5.2(e) ( Tensile strength outer sheath variartion) |
500.0 |
|
| Cl. 5.2(e) (Elongation of insulation variation) |
500.0 |
|
| Cl. 5.2(e) (Elongation of outer sheath variation) |
500.0 |
|
| Cl. 5.2(e) (Elongation of inner sheath variation) |
500.0 |
|
| 5.2 (f) (Flammability Test) |
500.0 |
|
| 5.2.g) (High Voltage 4 kV a.c.) |
1500.0 |
|
| 5.2 ( h) (Insulation resistance test ) |
1000.0 |
|
| 5.2 (i) (Water immersion test AC TEST) |
1500.0 |
|
| 5.2 (i) (Water immersion test DC TEST) |
3000.0 |
|
| 5.2 (j) (visual inspection) |
100.0 |
|
| 5.2 (j) (Sequential marking . ) |
100.0 |
|
| 5.5.a) (Depth of indentation) |
1000.0 |
|
|
| 2309 |
National Test House (SR), Chennai
| Uninterruptible power systems (UPS) - Method of specifying the performance and test requirements - Test as per Manufacture Specification |
Test as per Manufacture Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (1kVA UPS Test as per Manufacture Specification) |
10000.0 |
|
| 2 (2kVA UPS Test as per Manufacture Specification) |
12500.0 |
|
| 3 (3kVA UPS Test as per Manufacture Specification) |
12500.0 |
|
| 4 (5kVA UPS Test as per Manufacture Specification) |
12500.0 |
|
| 5 (10kVA UPS Test as per Manufacture Specification) |
25000.0 |
|
| 6 (15kVA UPS Test as per Manufacture Specification) |
25000.0 |
|
| 7 (20kVA UPS Test as per Manufacture Specification) |
40000.0 |
|
| 8 (Scientist Charges for Onsite Testing per day) |
5000.0 |
|
|
| 2310 |
National Test House (NWR), Jaipur
| IS 14255 (1995) - "AERIAL BUNCHED CABLES-FOR WORKING VOLTAGES UPTO AND INCLUDING 11OOVOLTS " |
"AERIAL BUNCHED CABLES-FOR WORKING VOLTAGES UPTO AND INCLUDING 11OOVOLTS " |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 10.1 (1) g (High Voltage) |
1500.0 |
|
| 10.1 (1) f (Volume resistivity for XLPE) |
1000.0 |
|
| 10.1 (1) e (Insulation Thickness-Minimum-Neutral) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Minimum-Phase 3) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Minimum-Phase-2) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Minimum-Phase-1) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Average- Neutral) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Average-Phase-3) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Average-Phase-2) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Average-Phase-1) |
250.0 |
|
| 10.1 (1) c (v) (Water absorption (Gravimetric)) |
1500.0 |
|
| 10.1 (1) c (iV) (Shrinkage test) |
250.0 |
|
| 10.1 (1) c (iV) (Shrinkage test) |
250.0 |
|
| 10.1 (1) c (iV) (Shrinkage test) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Elongation under load) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Elongation under load) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Elongation under load) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Elongation under load) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Permanent elongation after cooling) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Permanent elongation after cooling) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Permanent elongation after cooling) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Permanent elongation after cooling) |
250.0 |
|
| 10.1 (1) c (ii) (% Tensile strength-PH1) |
250.0 |
|
| 10.1 (1) c (ii) (% Tensile strength-PH2) |
250.0 |
|
| 10.1 (1) c (ii) (% Tensile strength-PH3) |
250.0 |
|
| 10.1 (1) c (ii) (% Tensile strength-NE) |
250.0 |
|
| 10.1 (1) c (i) (Tensile strength-PH1) |
250.0 |
|
| 10.1 (1) c (i) (Tensile strength-PH2) |
250.0 |
|
| 10.1 (1) c (i) (Tensile strength-PH3) |
250.0 |
|
| 10.1 (1) c (i) (Tensile strength-NE) |
250.0 |
|
| 10.1 (1) c (i) (Elongation-PH1) |
250.0 |
|
| 10.1 (1) c (i) (Elongation-PH2) |
250.0 |
|
| 10.1 (1) c (i) (Elongation-PH3) |
250.0 |
|
| 10.1 (1) c (i) (Elongation-NE) |
-250.0 |
|
| 10 .1 (1) b (i) (Breaking load :Test on messenger conductor:) |
1000.0 |
|
| 10.1 (1) b (ii) (Elongation test :Test on messenger conductor:) |
1000.0 |
|
| 10.1 (1) b (iii) (Conductor resistance :Test on messenger conductor:) |
1000.0 |
|
| 10.1 (1) a (i) (Tensile Test) |
1000.0 |
|
| 10.1 (1) a (ii) (Wrapping test) |
500.0 |
|
| 10.1 (1) a (iii) (Resistance test-Phase 1) |
1000.0 |
|
| 10.1 (1) a (iii) (Tests on phase/street light conductor) |
1000.0 |
|
| 10.1 (1) a (iii) (Resistance test-Phase 3 :
Tests on phase/street light conductor) |
1000.0 |
|
| 10.2 j (Volume resistivity for XLPE) |
500.0 |
|
| 10.2 k (High Voltage) |
1500.0 |
|
| 10.2 h (Hot set test-Elongation under load) |
250.0 |
|
| 10.2 e (Conductor resistance-Neutral) |
1000.0 |
|
| 10.2 e (Conductor resistance- Phase-2) |
1000.0 |
|
| 10.2 e (Conductor resistance- Phase-3) |
1000.0 |
|
| 10.1 C VI (1) (Carbon Black Content) |
1000.0 |
|
| 10.1 C VI (2) (Physical tests for XLPE insulation - Carbon Black Dispersion) |
1500.0 |
|
|
