NTH - Management Information System

Search by Standard No.

Reset

4236 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

1231

National Test House (WR), Mumbai

CUS/SR/MECH-22 - Stainless Steel Insu-Roti Saver (Mini)

Stainless Steel Insu-Roti Saver (Mini)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Dimensions)	2000.0
2.0 (Weight)	500.0
3.0 (Capacity)	1000.0
4.0 (Chemical composition, % by mass)	3000.0

1232

National Test House (WR), Mumbai

IS 6603 (2024) - Stainless Steel Semi-Finished Products, Bars, Wire Rods and Bright Bars — Specification (2nd Revision)

Stainless Steel Semi-Finished Products, Bars, Wire Rods and Bright Bars — Specification (2nd Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Freedom From Defects - Visual Examination as per IS 6603 Cl.6.1 & 6.2)	1000.0
7 (Chemical Composition-The ladle analysis of steel, when carried out either by the methods specified in relevant parts of IS 228 or any other established international instrumental/chemical method)	5000.0
9.0 Mechancial Properites (The tensile test ( Tensile Stregth, 0.2% Proof/Yield Stress, % of Elongation ) shall be carried out in accordance with IS 1608 (Part 1))	3000.0
9.0 Mechancial Properties (Hardness shall be determined in accordance with IS 1500 (Part 1), IS 1501 (Part 1) or IS 1586 (Part 1).)	2000.0
9.0 Mechanical Properties (Charpy impact test shall be carried out in accordance with IS 1757 (Part 1).)	5000.0
12 (Dimesnion Measurment in mm dimensional tolerances for the bars and flats shall be as laid down in Table 26 to Table 36 given at Annex C of IS 6603)	1000.0
14 (Corrosion Resistance Test - The material shall be tested for corrosion resistance as per IS 10461 (Part 1) or ISO 3651 (Part 2) or any other method)	10000.0

1233

National Test House (ER), Alipore

ND Custom 10 (2024) - Load Bearing Capacity for RCPC Slabs

Load Bearing Capacity for RCPC Slabs

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's Requirement (Load Bearing Capacity Test)	3000.0

1234

National Test House (ER), Alipore

IS 12889 (2018) - Performance evaluation of materials used for liquid penetrant test (First Revision)

Performance evaluation of materials used for liquid penetrant test (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12.2 (SYSTEM SENSITIVITY PERFORMANCE)	10000.0

1235

National Test House (SR), Chennai

RDSO/2007/GE:0014 November 2009 (November 2009) - Guidelines and Specifications for Design of Formation for Heavy Axle Load (RDSO/2007/GE:0014 )

Guidelines and Specifications for Design of Formation for Heavy Axle Load (RDSO/2007/GE:0014 )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12.1(i-a) (The uniformity coefficient (Cu) IS 2720-1 (1983)/IS 1498 (1970))	1500.0
12.1.(i-b) (The Coefficient of Curvature (Cc) IS 2720-1 (1983)/IS 1498 (1970))	1500.0
12.1.(ii) (Los Angeles Abrasion Value (IS 2386(4):1963))	1500.0
12.2 (Sieve Analysis/Grading Percentage /Grain size distribution [IS 2720 (Part 4)])	5000.0
12.1.iv) (CBR value (Soaked))	6000.0
12.1(iv) (OMC & MDD (Proctor Test) [IS 2720 (Part 8)])	5000.0
12.1 (Classification of soil.)	2000.0

1236

National Test House (NR), Ghaziabad

NTH/NR/RPPT/Ceiling Tiles/01 (2024) - Solid Mineral Surface Ceiling Tile

Solid Mineral Surface Ceiling Tile

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's Req. (Density)	1000.0
Firm's Req. (Tensile Strength)	1500.0
Firm's Req. (Elongation@break)	1500.0
Firm's Req. (Boiling Water Resistance)	2000.0
Firm's Req. (Dry Heat Resistance @40-60°C)	2000.0
Firm's Req. (Stain Resistance)	5000.0
Firm's Req. (Chemical Resistance)	5000.0
Firm's Req. (High Heat Resistance @65°C)	2000.0

1237

National Test House (ER), Alipore

IS 9000 Part 4 (2008) - BASIC ENVIRONMENTAL TESTING PROCEDURES FOR ELECTRONIC AND ELECTRICAL ITEMS PART4 DAMP HEAT(STEADY STATE)

BASIC ENVIRONMENTAL TESTING PROCEDURES FOR ELECTRONIC AND ELECTRICAL ITEMS PART4 DAMP HEAT(STEADY STATE)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl.4 (Damp Heat (Steady State))	20000.0

1238

National Test House (ER), Alipore

IS 13252 (2010) - Information Technology Equipments, Class I Product

Information Technology Equipments, Class I Product

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2.1.1.6 (Manual Controls)	2000.0
2.3.3 (Separations from Hazardous Voltages)	1000.0
2.5 (Limited Power Source)	1000.0
2.6 (Protective earthing Conductors and protective bonding Conductors)	2000.0
2.7 (Over Current and earth fault protection primary Circuit)	1000.0
2.8 (Protection requirements for safety interlocks)	500.0
2.9 (Humidity Condition)	10000.0
2.10.2 (Determination of Working Voltage)	1000.0
3 (Wiring Connection and Supplies)	1000.0
4.2.1,4.2.2,4.2.3,4.2.4 (Steady force Test)	1000.0
4.2.5 (Impact Test Apparatus)	500.0
4.2.6 (Drop Test)	1000.0
4.2.7 (Stress Relief Test)	1000.0
4.3.1 (Edges and corners)	500.0
4.3.4 (Securing of Parts)	500.0
4.3.6 (Direct Plug in Equipment)	1000.0
4.3.8 (Batteries)	1000.0
4.3.9 (Oil & Grease)	500.0
4.4.2 (Protected in operator access area)	1000.0
4.4.3 (Protected in restricted access Location)	1000.0
4.4.4 (Protected in service access Location)	1000.0
4.5.2. (Temperature Test)	1000.0
4.5.3. (Temperature Limits for Materials)	2000.0
4.5.4. (Touch Temperature Limits)	1000.0
4.5.5. (Resistance to abnormal Heat)	2000.0
4.6.3,4.6.4,4.6.4.1,4.6.4.2,4.6.4.3 (Top, Bottom and Side Opening)	500.0
4.6.5 (Adhesives for Constructional Purposes)	500.0
5.2 (Electric Strength)	5000.0
6.1.1,6.1.2 (Protection of Telecommunication network service person and user to network Protection from Hazardous Voltages)	1000.0
6.2.1 (Protection of equipments user from overvoltage on Telecommunication network)	1000.0
6.2.2 (Electrical Strength Test)	2000.0
7.2 (Protection of cable distribution system service persons and user of other equipment connected to the system from hazardous voltage in the equipment)	2000.0
7.3 (Protection of equipment user from over voltages on the cable distribution)	1000.0

1239

National Test House (ER), Alipore

RDSO/PE/SPEC/AC/0009-2021 (Rev-3) - Specification for Valve Regulated Lead Acid Batteries for 110V Train lighting, Air Conditioned coaches and three phase EMU/MEMU & Metro Rakes

Specification for Valve Regulated Lead Acid Batteries for 110V Train lighting, Air Conditioned coaches and three phase EMU/MEMU & Metro Rakes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 & 10 (Dimensions,mass, marking and workmanship)	2500.0
8.1 (Capacity at 10 hrs rate)	40000.0
8.2 (Capacity at 5 hrs rate)	10000.0
8.3 (Capacity at 3 hrs rate)	10000.0
8.4 (Watt hour and Ampere hour Efficiency test)	20000.0
8.5 (Retention of charge and storage test)	10000.0
8.6 (Life Test)	100000.0
8.7 (Recharge capability test)	15000.0
8.8 (Loss of weight test)	5000.0
8.9 (Equilibrium Float Current test)	9999.0
8.10 (Permissible discharge current test)	10000.0
8.11 (Gas Recombination efficiency test)	5000.0
8.12 (Verification of material and component test (As per Customer's declaration))	1000.0
8.15 (Air pressure test)	10000.0
8.16 (Vibration test)	10000.0
8.17 (Internal Resistance test)	5000.0
8.18 (Capacity (C10) at zero degree test)	15000.0

1240

National Test House (ER), Alipore

IS 1145 -1980 (Reaffirmed 2003) - SPECIFICATION FOR LEAD-ACID STORAGE BATTERIES FOR MOTOR CYCLES, AUTORICKSHAWS AND SIMILAR VEHICLES

SPECIFICATION FOR LEAD-ACID STORAGE BATTERIES FOR MOTOR CYCLES, AUTORICKSHAWS AND SIMILAR VEHICLES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.8 (Dimension)	1000.0
7.6 (Physical Examination)	1000.0
7.9 (Air Pressure Test)	10000.0
7.12 (High Rate Discharge Test)	15000.0
7.15 (Life Test)	20000.0
7.14 (Resistance to Overcharge Test)	5000.0
7.13 (Retention of Charge Test)	5000.0
7.10 (Test for Capacity)	20000.0
7.11 (Vibration Test)	10000.0
7.16 or 7.17 (Storage Test)	15000.0

1241

National Test House (ER), Alipore

IRS : TC 30-05 - UNDERGROUND RAILWAY JELLY FILLED QUAD CABLES FOR SIGNALLING AND TELECOM INSTALLATIONS

UNDERGROUND RAILWAY JELLY FILLED QUAD CABLES FOR SIGNALLING AND TELECOM INSTALLATIONS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.11 (Visual Inspection and Marking)	100.0
3.12 (Visual Inspection and Marking)	100.0
5.9.1 (HV Test to be carried out)	2000.0
5.9.2 (Insulation resistance Test)	1000.0
5.9.3 (Conductor Resistance Test)	1.0
5.6.3.1 (Mass of Zinc Coating test)	3000.0
5.8.2.3 (Shrinkage Test of PE Insulation)	1000.0
5.8.2.2 (Shrinkage Test of PVC Sheaths)	1000.0
5.6.1 (Dimensions (Armour Tape))	2000.0

1242

National Test House (ER), Alipore

NFC-33 041 (1998) - Insulated cables and their accessories for power systems Anchoring devices for overhead distribution with bundle assembled cores of rated voltage of 0.6/1 kV

Insulated cables and their accessories for power systems Anchoring devices for overhead distribution with bundle assembled cores of rated voltage of 0.6/1 kV

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (High Voltage Test)	5000.0
- (Dimension test)	1000.0

1243

National Test House (ER), Alipore

NFC-33 040 (1988) - Insulated cables and their accessories for power systems Suspension equipments for overhead distribution with bundle assembled cores of rated voltage 0.6/1 kV

Insulated cables and their accessories for power systems Suspension equipments for overhead distribution with bundle assembled cores of rated voltage 0.6/1 kV

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (High Voltage Test)	5000.0
- (Dimension Test)	1000.0
13 (Mass in kg/10 Liters)	5.0

1244

National Test House (ER), Alipore

ELRS /SPEC/ SI /0015 (2001) - SPECIFICATION FOR RELIABILITY OF ELECTRONICS USED IN ROLLING STOCK APPLICATION

SPECIFICATION FOR RELIABILITY OF ELECTRONICS USED IN ROLLING STOCK APPLICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.7 & Annexure-1 (Burn – in test)	20000.0

1245

National Test House (ER), Alipore

IS 9857:1990 (1990) - Welding Cable Specification

Welding Cable Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.1.a.2 (Test on Conductor- Conductor Resistance Test)	2500.0
10.1.b (Test for thickness of Covering)	1500.0
10.1.d (High Voltage Test (Water Immersion Test))	3500.0

1246

National Test House (ER), Alipore

IS 613 (2000) - Copper Rods and Bars for Electrical Purposes

Copper Rods and Bars for Electrical Purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.4 (Resistance of a Solid Conductor)	5000.0
6 (Freedom from defects)	1000.0
9.1 (Tensile Strength)	2000.0
9.1 (Elongation)	1000.0
9 (Vickers Hardness)	2000.0
9.2 (Bend Test)	1000.0
10 (Dimensions)	1000.0
11 (Electrical Resistivity Test)	2000.0

1247

National Test House (ER), Alipore

Climatic Ageing Test (Dry Heat Test) as per IS 9000 (Part-III/Sec-2) :1977 & Customer Specification - Climatic Ageing Test (Dry Heat Test) as per IS 9000 (Part-III/Sec-2) :1977 & Customer Specification

Climatic Ageing Test (Dry Heat Test) as per IS 9000 (Part-III/Sec-2) :1977 & Customer Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Climatic Ageing Test (Dry Heat Test) as per IS 9000 (Part-III/Sec-2) -1977)	20000.0

1248

National Test House (ER), Alipore

IEC 61439-1: 2009 & IS/IEC:60529-2001 - IP-65 Class of protection test Drawing Verification Power Frequency Voltage withstand test before and after IP test Dielectric Properties test before and after IP test

IP-65 Class of protection test Drawing Verification Power Frequency Voltage withstand test before and after IP test Dielectric Properties test before and after IP test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (IP-65 Class of Protection test)	15000.0
2 (Drawing verification)	3000.0
3 (Power frequency voltage withstand test)	5000.0
4 (Di-electric properties test)	5000.0
9.1(iii), sub clause 5.2,7.3 ((i) Rated Voltage at input terminals of current regulated. (ii) Current at rated voltage per unit at input terminals of current regulates. (iii) illumination Measured at 1.5 meter from LED signal lighting unit axial direction at rated voltage. (iv) Colour)	15000.0
9.1(xiii) (Insulation Resistance Test before and after high Voltage test as per specification)	9000.0
9.2 (Temperature Rise Test)	20000.0

1249

National Test House (ER), Alipore

IS/IEC:60529-2001 & IEC 61439-1: 2009 - IP-42 Class of protection test Drawing Verification Power Frequency Voltage withstand test after IP test Dielectric Properties test after IP test

IP-42 Class of protection test Drawing Verification Power Frequency Voltage withstand test after IP test Dielectric Properties test after IP test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (IP-42 Class of protection test)	15000.0
2 (Drawing verification)	3000.0
3 (Power Frequency voltage withstand test)	2500.0
4 (Di-electric Properties test)	5000.0

1250

National Test House (ER), Alipore

RDSO/2008/EL/SPEC/0069, Rev. 1 - Technical Specification for roof mounted forced cooled dynamic braking resistors with DC Motor driven cooling blowers for AC Electric LOcomotives.

Technical Specification for roof mounted forced cooled dynamic braking resistors with DC Motor driven cooling blowers for AC Electric LOcomotives.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
20 (Hygroscopic Test)	10000.0

1251

National Test House (ER), Alipore

RDSO/PE/SPEC/TL/0091-2016(Rev-1) (2016) - SPECIFICATION FOR ENERGY EFFICIENT LED BASED LUMINAIRE UNITS FOR PASSENGER COACHES

SPECIFICATION FOR ENERGY EFFICIENT LED BASED LUMINAIRE UNITS FOR PASSENGER COACHES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1252

National Test House (ER), Alipore

RDSO Specification no. ETI/PSI/29(12/79) (1979) - Low Tension Distribution Panel for Railway AC Traction Sub-Station.

Low Tension Distribution Panel for Railway AC Traction Sub-Station.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.2(i) (Checking the wiring for correctness and continuity.)	5000.0
6.2(ii) (Voltage test on the panels & the wiring for withstand voltage of 2000V(r.m.s) to earth for 1 minute.)	10000.0
6.2(iii) (Insulation Resistance of the complete wiring)	10000.0

1253

National Test House (ER), Alipore

IEC:62561-7 (2011) - Lightning protection system components - Part 7: Requirements for earthing enhancing Compound.

Lightning protection system components - Part 7: Requirements for earthing enhancing Compound.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.4 (Determination of Resistivity)	20000.0

1254

National Test House (ER), Alipore

CQA(HV)/QAI/66/001/ELECTROMAGNET (1989) - Quality Assurance Instruction for Electromagnet

Quality Assurance Instruction for Electromagnet

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12.5.2 (Insulation Resistance Test)	6000.0
12.5.5 (Moisture Resistance Test)	30000.0
12.5.6 (Cold Resistance Test)	10000.0
12.5.7 (Thermal Stability Test)	10000.0
12.5.9 (Frost & Dew Resistance Test)	10000.0
12.5.12 (Vibration Strength Test)	10000.0

1255

National Test House (ER), Alipore

8623-1:(1993) - Low-Voltage Switchgear and Control gear Assemblies, Part 1: Requirements for Type-Tested and Partially Type-Tested Assemblies [ETD 7: Low Voltage Switchgear and Control gear]

Low-Voltage Switchgear and Control gear Assemblies, Part 1: Requirements for Type-Tested and Partially Type-Tested Assemblies [ETD 7: Low Voltage Switchgear and Control gear]

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.2.2 (Verification of dielectric properties)	10000.0
8.3.4 (Verification of insulation resistance)	10000.0
8.2.1.3 (Tempreture rise test)	20000.0

1256

National Test House (ER), Alipore

IS/IEC60947-1 - Low-voltage switchgear and control gear - Part 1: General rules

Low-voltage switchgear and control gear - Part 1: General rules

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Degree of protection against ingress of water indicated by the second characteristic numeral 6 of IS/IEC 60529 clause 14.2.6)	7500.0
10 (Marking)	-
Clause :7 (Degrees of protection against action to access to hazards parts indicated by the additional letter, Cl 14.2.7 of IS/IEC 60529)	7500.0
13.2 (First Characteristic Numeral 1 (Protection against solid foreign objects of 50 mm dia and greater))	7500.0
13.2 (First Characteristic Numeral 2 (Protection against solid foreign objects of 12.5 mm dia and greater)as per IS/IEC60529))	7500.0
13.2 First Characteristic Numeral 3 (Protection against solid foreign object 2.5 mm diameter and greater as per IS/IEC 60529)	7500.0
13.2 First Characteristic Numeral 4 (Protection against solid foreign objects of 1.0 mm diameter and great as per IS/IEC 60529)	7500.0
13.4 Dust Test (Dust Protected , Category 1 as per IS/IEC 60529(reductions in air pressure with in the enclosure below that of the surrounding air.))	7500.0
13.5 Dust Test, Category 2 (Dust Protected , Category 2 as per IS/IEC 60529(no pressure difference relative to the surrounding air is present..))	7500.0
13.5/13.6 (Dust Tight as per IS/IEC 60529)	7500.0
14.2.1 Second Characteristic numeral 1 (Protection against vertically falling water drops as per IS IEC 60529)	7500.0
14.2.2 Second characteristics numeral 2 (Protected against vertically falling water drops when enclosure tilted upto 15 degree)	7500.0
14.2.3 second characteristic numeral 3 (Protection against spraying water as per IS /IEC 60529)	7500.0
14.2.4 Second characteristic numeral 4 (Protected against splashing water as per IS/IEC 60529)	7500.0
14.2.5 Second characteristic numeral 5 (Protected against water jet as per IS/IEC 60529)	7500.0
14.2.6 Second characteristic numeral 6 (Protected against powerful water jet as per IS/IEC 60529)	7500.0
14.2.7, Second characteristic numeral 7 (Protection against temporary immersion of water as per IS/IEC 60529)	7500.0
14.2.8, Second Characteristic numeral 8 (Protection against the effects of continuous immersion in water as per IS/IEC 60529)	7500.0
14.2.8, Second Characteristic numeral 8 (Protection against the effects of continuous immersion in water as per IS/IEC 60529)	7500.0

1257

National Test House (ER), Alipore

IEC 61427-1: 2013 (2013) - Secondary cells and batteries for renewable energy storage - General requirements and methods of test- Part 1: Photovoltaic off-grid application

Secondary cells and batteries for renewable energy storage - General requirements and methods of test- Part 1: Photovoltaic off-grid application

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.1 (Capacity Test)	60000.0
8.3 (Charge retension test)	25000.0
8.4 (Cycling endurance test in photovoltaic applications(extreme conditions))	70000.0

1258

National Test House (ER), Alipore

CQAL/637 :2006 - SPECIFICATION FOR BATTERY SECONDARY, LEAD ACID, LOW MAINTENANCE FOR MT PURPOSES

SPECIFICATION FOR BATTERY SECONDARY, LEAD ACID, LOW MAINTENANCE FOR MT PURPOSES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
15.1 (Visual Examination)	1000.0
15.2 (Physical Examination)	1000.0
15.3 (Dimensions and Layout)	1000.0
15.4 (Marking)	1000.0
15.5 (Capacity (5-h rate))	5000.0
15.6.1 (High Rate Discharge at -15 degree C)	10000.0
15.6.3 (High Rate Discharge at Normal Temperature)	15000.0
15.7 (Robustness of Handle)	5000.0
15.8 (Charge Acceptance)	15000.0
15.9 (Air Pressure Test)	10000.0
15.10 (Life Cycle test)	100000.0
15.11 (Vibration Resistance)	10000.0
15.12 (Over Charge Endurance)	20000.0
15.13 (Strength of Terminal)	5000.0
15.14 (Robustness to Fastening)	5000.0
15.15 (Test for Dry Charged Battery)	10000.0
15.16 (High Voltage Test)	5000.0
15.17 (Retention of Charge)	15000.0
15.18 (Electrolyte Retention test)	5000.0
16.1 (Reserve Capacity Test)	20000.0
16.2 (Cold Cranking Performance test at -18 Degree C)	15000.0
16.3 (Water Consumption Test)	10000.0

1259

National Test House (ER), Alipore

IS 11371 (1985) - Method for macroetch test of wrought steel products

Method for macroetch test of wrought steel products

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 11371 (Macro Etch Examination)	1000.0

1260

National Test House (ER), Alipore

IS 5154-Part 1- 2013 (2013) - LEAD-ACID TRACTION BATTERIES PART 1 GENERAL REQUIREMENTS AND METHODS OF TEST [ Bag plate Lead Acid Secondary Battery)

LEAD-ACID TRACTION BATTERIES PART 1 GENERAL REQUIREMENTS AND METHODS OF TEST [ Bag plate Lead Acid Secondary Battery)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Energy Density Test)	5000.0