NTH - Management Information System

Search by Standard No.

Reset

4134 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

1291

National Test House (ER), Kolkata

RDSO SPECIFICATION No. M&C/ PCN/ 100/ 2018 (2018) - FULL GLOSS POLYURETHANE ENAMEL (TWO PACK)

FULL GLOSS POLYURETHANE ENAMEL (TWO PACK)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Identification of polyisocyanates)	1200.0
2 (Drying time a) Surface dry b) Hard dry c) Hard dry at 70 Deg. C)	3600.0
3 (Consistency)	1200.0
4 (Finish)	1200.0
5 (Colour)	1200.0
6 (Dry film thickness)	1200.0
7 (Volume solids)	1200.0
8 (Scratch hardness (1.5 Kg Load))	1200.0
9 (Flexibility & Adhesion (6.25 mm mandrel))	1200.0
10 (Flash point (a) Component ‘A’ (b) Component ‘B’)	2400.0
11 (Fineness of Grind)	1200.0
12 (Pot life (After induction time) at a) 27±2°C b)40±2ºC)	1500.0
13 (Gloss at 60° angle of incidence)	1200.0
14 (Mass in Kg/10 litres)	1200.0
15 (Keeping properties)	5000.0
16 (Theoretical spreading rate)	2000.0
17 (% poly isocyanate by mass, in hardener)	3000.0
18 (Viscosity (Efflux time by Ford cup No.4) of paint i.e. mix. Of two components at 27± 2 °C in Supply condition)	1200.0
19 (Accelerated Tests (a) Resistance to 30% Sulphuric acid (weight by volume) (b) Resistance to 20% caustic potash (weight by volume) (c) Resistance to oil (d) Resistance to solvents (e) Resistance to water)	7200.0
20 (Durability Tests Accelerated weathering test)	37500.0
21 (Humidity Test (500 Hours))	9000.0
22 (Abrasion resistance-1000 Cycle)	5000.0

1292

National Test House (ER), Kolkata

RDSO Specification No. M&C/PCN/100/2018 - POLYURETHANE SURFACER (TWOPACK)

POLYURETHANE SURFACER (TWOPACK)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Drying time a) Surface dry b) Hard dry c) Hard dry at 70°C)	3600.0
2 (Consistency)	1200.0
3 (Finish)	1200.0
4 (Colour)	1200.0
5 (Dry film thickness)	1200.0
6 (Volume solids, %)	2000.0
7 (Scratch hardness (1.5Kg Load))	1200.0
8 (Flexibility & Adhesion (6.25 mm mandrel))	1200.0
9 (Flashpoint a) Component ‘A’ b) Component ‘B’)	2400.0
10 (Fineness of Grind)	1200.0
11 (Pot life (After induction time) i) 27±2°C ii) 40±2°C)	1500.0
12 (Mass in Kg/10 litres)	1200.0
13 (Keeping properties)	2000.0
14 (Theoretical spreading rate)	2000.0
15 (Viscosity (Efflux time by Ford cup No.4) of paint i.e. mix of two components at 27± 2 °C in Supply condition)	1200.0

1293

National Test House (ER), Kolkata

NTH/ER/RPPT/HDPE PIPE INSPECTION/2026 - INSPECTION OF HDPE PIPES

INSPECTION OF HDPE PIPES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's request (Inspection & Joint Testing Report)	40026.0

1294

National Test House (ER), Kolkata

RDSO SPECIFICATION M&C/PCN/100/2018 PUTTY - UNSATURATED POLYESTER BASE KNIFING PUTTY (TWO PACK)

UNSATURATED POLYESTER BASE KNIFING PUTTY (TWO PACK)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Drying time: a)Surface dry b) Hard dry c)Hard dry time at 70 Deg. C)	3600.0
2 (Consistency)	1200.0
3 (Stopping properties)	2000.0
4 (Rubbing properties)	2000.0
5 (Hold out Property)	2000.0
6 (Adhesion & Compatibility of Paint System)	2000.0
7 (Pot life ,at 27±2 Deg. C)	1500.0
8 (% solids)	1200.0
9 (Keeping properties)	5000.0

1295

National Test House (NWR), Jaipur

IS 17876 (2022) - Stainless Steel Welded Pipes and Tubes for General Services - Specification

Stainless Steel Welded Pipes and Tubes for General Services - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.1 (Tensile Requirement - Tensile Strength as per IS 1608 Part 1 or Test Method specified)	1000.0
10.1 (Tensile Requirement - Yield Strength as per IS 1608 Part 1 or Test Method specified)	1000.0
10.1 (Tensile Requirement - %Percentage of Elongation (on Gauge Length of 50mm) as per IS 1608 Part 1 or Test Method specified)	1000.0
24 (Outside Diameter, mm)	1000.0
24 (Wall Thickness, mm)	1000.0
8 (Chemical Composition - Ladle Analysis as per IS 228 and its relevant parts or any other established instrumental/chemical method)	5000.0

1296

National Test House (ER), Kolkata

Custom Paint finishing Aluminium paint Heat resistance - Custom Paint finishing Aluminium paint Heat resistance

Custom Paint finishing Aluminium paint Heat resistance

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Preliminary Examination)	1000.0
2 (Consistency)	1000.0
3 (Flash Point (Abel))	1000.0
4 (Efflux time at 27(+/-)5 Deg.C ( for first 50 ml))	1000.0
5 (Application Properties & Finish)	1000.0
6 (Covering Power)	1000.0
7 (Drying time (i) Surface dry)	1000.0
8 (Drying time (ii) Hard dry)	1000.0
9 (Colour)	1000.0
10 (Flexibility & Adhesion (Bend Test))	1000.0
11 (Scratch Hardness)	1000.0
12 (Volatile matter)	1000.0
13 (Resistance to high Temperature (a) At 300 Deg.C For 4 Hours)	1000.0
14 (Resistance to high Temperature (b) At 400 Deg.C For 1 Hour)	1000.0
15 (Resistance to high Temperature (c) At 600 Deg.C For 1 Hour)	1000.0

1297

National Test House (WR), Mumbai

Customized Specification for the Vulcanized hard rubber - Customized Specification for the Vulcanized hard rubber

Customized Specification for the Vulcanized hard rubber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Hardness of Vulcanized Hard Rubber)	1000.0

1298

National Test House (ER), Kolkata

Custom Paint RFU Finishing various shades - Custom Paint RFU Finishing various shades

Custom Paint RFU Finishing various shades

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
20 (Durability Test (25 days Outdoor Exposure Then 96 hours salt Spray))	5000.0
19 (Accelerated Storage stability)	3000.0
15 (Resistance to Salt Spary (96 hrs))	4800.0
18 (Presence of Rosin Derivative)	1000.0
17 (Non-volatile Content)	1000.0
16 (Flash Point (Abel))	1000.0
14 (Stripping Test)	1000.0
13 (Scratch Hardness)	1000.0
12 (Flexibility & Adhesion (Bend Test))	1000.0
11 (Wet Opacity)	1500.0
10 (Colour)	1000.0
9 (Gloss)	1000.0
8 (Fineness of Grind)	1000.0
7 (Finish)	1000.0
6 (Drying time (iii) Tack free dry)	1000.0
5 (Drying time (ii) Hard dry)	1000.0
4 (Drying time (i) Surface dry)	1000.0
3 (Relative consistency at 27 deg. C)	1000.0
2 (Consistency)	1000.0
1 (Preliminary Examination)	1000.0
33 (Natural outdoor weathering)	3000.0
32 (Resistance to warm water (45 ± 3 °C for 4 hours))	1200.0
31 (Resistance to heat (after air drying for 48 hours) Except White)	1200.0
30 (Resistance to petrol -benzol mixture)	1200.0
29 (Resistance to Alkali)	1500.0
28 (Resistance to Acid)	1500.0
27 (Mass in Kg/10 litres)	1200.0
26 (Accelerated Storage Stability test)	3000.0
25 (Lead Restriction total lead compound as PbO expressed as % of dry pigment)	1000.0
24 (Water content, %)	1200.0
23 (Resistance to Humidity under condition of condensation)	12000.0
22 (Application)	1200.0
21 (Efflux time (Ford Cup No. 4) at 30 ±1 Deg. C)	1200.0
33 (Natural outdoor weathering)	3000.0

1299

National Test House (ER), Kolkata

MMDTS 18034 (Rev. 04) (2019) - Technical Specification for PU based Wet -On- Wet Applicable on Exterior Painting System for LHB Types Coaches.

Technical Specification for PU based Wet -On- Wet Applicable on Exterior Painting System for LHB Types Coaches.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 ((Anti Graffiti test ASTM D-6578))	5000.0

1300

National Test House (ER), Kolkata

CUSTOM PAINT ONSITE TESTING-1 (2024) - CUSTOM PAINT ONSITE TESTING-1

CUSTOM PAINT ONSITE TESTING-1

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Distinctness of Image (DOI))	10000.0

1301

National Test House (NR), Ghaziabad

Custom/ME/2024/Stay Set (2024) - Stay Set

Stay Set

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Dimension of Stay Rod)	1000.0
1 (Dimension of Stay Plate)	1000.0
2 (Dimension of Turn Buckle)	1000.0
4 (Dimension of Angle)	1000.0
5 (Dimension of Eye Bolt)	1000.0
8 (Dimension of Square Washer)	1000.0
6 (Yield Stress)	1000.0
7 (Tensile Strength)	1000.0
9 (Elongation)	1000.0
10 (Breaking Strength of Stay Set Assembly)	3000.0
11 (Uniformity of Zinc Coating)	1500.0
12 (Mass of Zinc Coating)	1500.0
13 (Chemical Composition)	3500.0

1302

National Test House (NR), Ghaziabad

1445 (1977) - Porcelain Insulators for Overhead Power Lines with a Nominal Voltage Up to and Including 1000 V

Porcelain Insulators for Overhead Power Lines with a Nominal Voltage Up to and Including 1000 V

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.4 (Visual Examination)	1000.0
8.5 (Verification of Dimensions)	2000.0
8.6 (Dry Power-Frequency Voltage Withstand Test)	7000.0
8.7 (Wet Power-Frequency Voltage Withstand Test)	7000.0
8.10 (Power-Frequency Puncture Withstand Test)	7000.0
8.8 (Temperature Cycle Test)	5000.0
8.9 (Mechanical Failing Load Test)	5000.0

1303

National Test House (WR), Mumbai

Customized Specification for Rubber Fenders - Customized Specification for Rubber Fenders

Customized Specification for Rubber Fenders

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Hardness (Shore A))	1000.0
- (Compression Set)	2000.0
- (Tear Strength)	2000.0
- (Tensile Strength)	2000.0
- (Elongation at break)	2000.0

1304

National Test House (ER), Kolkata

IRC 105 (2019) - SPECIFICATIONS FOR DENSE BITUMINOUS MACADAM AND BITUMINOUS CONCRETE FOR AIRFIELD PAVEMENTS

SPECIFICATIONS FOR DENSE BITUMINOUS MACADAM AND BITUMINOUS CONCRETE FOR AIRFIELD PAVEMENTS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table 3.5 (Durability [ Soundness (Sodium sulphate )], %)	2000.0
Table 3.5 (Durability [Soundness (Magnesium or Sodium Sulphate )], %)	2000.0
Table 3.5 (Particle Shape (Combined Flakiness and Elongation Index), %)	3000.0
Table 3.5 (Strength [Los Angeles Abrasion Value], %)	1500.0
Table 3.5 (Strength [Aggregate Impact Value], %)	1500.0
2 (Density of DAC (On lines of ASTM D 2726))	2000.0
2 (Density of DBM (On lines of ASTM D 2726))	2000.0

1305

National Test House (SR), Chennai

CUS/SR/MECH-55 (2024) - Mechanical Properties of Metal

Mechanical Properties of Metal

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Dimensions, mm)	2000.0
2.0 (Brinell Hardness, HBW)	2000.0
3.0 (Chemical composition, % by mass)	5000.0
4.0 (Mass of Zinc Coating, g/m²)	2000.0
5.0 (Powder Coating Thickness, micron)	2000.0
6.0 (Tensile strength, N/mm²)	1000.0
7.0 (Yield strength, N/mm²)	1000.0
8.0 (Percentage Elongation, %)	1000.0
9.0 (Weight, kg)	1000.0
10.0 (Tensile Load, kN)	3000.0
11.0 (Yield Load, kN)	3000.0
3.1 (Copper Purity, %)	2400.0
12 (Capacity, ml)	1000.0
9.2 (Rockwell Hardness Test, HRC)	2000.0

1306

National Test House (SR), Chennai

251 (2024) - SODA ASH, TECHNICAL

SODA ASH, TECHNICAL

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Description)	1200.0
4.2 (Bulk Density)	1200.0
4.3 (Volatile Matter Content)	1200.0
4.4 (Sieve Analysis of Dense Grade Soda Ash)	1200.0
4.5 (Total alkalinity (as Na2CO3))	1200.0
4.5 (Matter insoluble in water)	1200.0
4.5 (Sulphate (Na2SO4))	1200.0
4.5 (Chloride (as NaCl))	1200.0
4.5 (Iron (as Fe2O3))	1200.0

1307

National Test House (ER), Kolkata

ASTM B117 Salt spray - ASTM B 117 Salt spray Test For 96 hrs

ASTM B 117 Salt spray Test For 96 hrs

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1308

National Test House (ER), Kolkata

Custom/Mech/2022 (2022) - Specification for Customer Test request.

Specification for Customer Test request.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Chemical Composition)	4000.0
0 (Mass of Zinc Coating)	2000.0
0 (Test results Chemical as per annexure)	10000.0
0 (Test results as per annexure)	61200.0
8 (Dimensions)	2500.0
0 (Yield Stress/0.2% proof stress, MPa)	1000.0
0 (Percent Elongation)	1000.0
0 (Bend test)	1000.0
0 (Proof Load)	3000.0
0 (Load test of Wedge on the lines of IS 14268)	3000.0
0 (Salt Spray test, 1440 Hrs.)	60000.0
0 (Tensile strength test, N/mm2)	5000.0
0 (Decarburization test)	3000.0
0 (Load Test)	5000.0
0 (Dimensions of Bolt Nut and washer)	2000.0
0 (Chemical Analysis(SS 304/SS 316) of Bolt, Nut and washers)	8000.0
M1 (Shear Strength test, MPa)	3000.0
C2 (Brinell/ Vickers/ Rockwell Hardness)	2000.0
C3 (Tensile Strength (MPa))	1000.0
0 (Impact test, J)	3000.0
0 (Microstructure analysis)	3000.0
0 (Percent Reduction of Area)	1000.0
0 (Breaking Load)	3000.0
0 (Test results)	10000.0
0 (Compression Test)	3000.0
0 (Uniformity of Coating)	1000.0
0 (Coating Thickness)	2000.0
0 (Adhesion Test)	1000.0
0 (Flattening Test)	1000.0

1309

National Test House (WR), Mumbai

Customized Specification for Figo Super Strong white Phenyl 1 Ltr.as per CSD Index no. 27318 - Customized Specification for Figo Super Strong white Phenyl 1 Ltr.as per CSD Index no. 27318

Customized Specification for Figo Super Strong white Phenyl 1 Ltr.as per CSD Index no. 27318

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Nomenclature of the item)	500.0
- (Capacity(ltrs))	500.0
- (pH)	1000.0
- (Non volatile content as per IS 14364)	1000.0
- (QAC content as per IS 14364)	1000.0
- (Colour)	500.0

1310

National Test House (WR), Mumbai

Customized Specification for Valther Black Phenyle 1 Ltr as per CSD Index no. 27310 - Customized Specification for Valther Black Phenyle 1 Ltr as per CSD Index no. 27310

Customized Specification for Valther Black Phenyle 1 Ltr as per CSD Index no. 27310

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Nomenclature of the item)	500.0
- (HDPE Jar Height (mm))	500.0
- (HDPE Jar dia.(mm.))	500.0
- (Weight (gms))	500.0
- (Capacity (ltr))	500.0
- (Colour)	500.0
- (Active ingredients)	2000.0
- (Identification Marks/Marking)	500.0

1311

National Test House (WR), Mumbai

Customized Specification for WONDER CLEAN PHENYL (FLOOR CLEANER)1000 ML as per CSD Index no. 27140 - Customized Specification for WONDER CLEAN PHENYL (FLOOR CLEANER)1000 ML as per CSD Index no. 27140

Customized Specification for WONDER CLEAN PHENYL (FLOOR CLEANER)1000 ML as per CSD Index no. 27140

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Nomenclature of the item)	500.0
- (Colour)	500.0
- (Weight (ml.))	500.0
- (Active ingredient)	2000.0
- (Identification Marks/Marking)	500.0

1312

National Test House (WR), Mumbai

Customized Specification for WONDER CLEAN NAPTHALENE BALLS 1000 GMS as per CSD Index no. 27144 - Customized Specification for WONDER CLEAN NAPTHALENE BALLS 1000 GMS as per CSD Index no. 27144

Customized Specification for WONDER CLEAN NAPTHALENE BALLS 1000 GMS as per CSD Index no. 27144

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Nomenclature of the item)	500.0
- (Weight (gms))	500.0
- (Active ingredient)	2000.0
- (Identification Marks/Marking)	500.0
- (Colour)	500.0

1313

National Test House (WR), Mumbai

Customized Specification for JEM Napthalene Balls as per CSD Index no. 27143 - Customized Specification for JEM Napthalene Balls as per CSD Index no. 27143

Customized Specification for JEM Napthalene Balls as per CSD Index no. 27143

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Nomenclature of the item)	500.0
- (Weight (gms))	500.0
- (Colour)	500.0
- (Active ingredient)	2000.0
- (Identification Marks/Marking)	500.0

1314

National Test House (WR), Mumbai

Customized Specification for WONDER CLEAN NAPHTHALENE BALLS 500 gms. as per CSD Index no. 27142 - Customized Specification for WONDER CLEAN NAPHTHALENE BALLS 500 gms. as per CSD Index no. 27142

Customized Specification for WONDER CLEAN NAPHTHALENE BALLS 500 gms. as per CSD Index no. 27142

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Nomenclature of the item)	500.0
- (Weight(gms ))	500.0
- (Colour)	500.0
- (Active ingredients)	2000.0
- (Identification Marks/Marking)	500.0

1315

National Test House (WR), Mumbai

Customized Specification for Mangalam Camphor Tablet 250 GM Jar as per CSD Index no. 13165 - Customized Specification for Mangalam Camphor Tablet 250 GM Jar as per CSD Index no. 13165

Customized Specification for Mangalam Camphor Tablet 250 GM Jar as per CSD Index no. 13165

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Nomenclature of the item)	500.0
- (Diameter(cm.))	500.0
- (Height(cm.))	500.0
- (Net Weight(gms.))	500.0
- (Colour)	500.0
- (Active Ingredient)	2000.0
- (Design and Identification mark)	500.0

1316

National Test House (WR), Mumbai

Customized Specification for "NIRLON"2 PCS SET (GLASS AND LUNCH BOX) as per CSD Index no. 34380 - Customized Specification for "NIRLON"2 PCS SET (GLASS AND LUNCH BOX) as per CSD Index no. 34380

Customized Specification for "NIRLON"2 PCS SET (GLASS AND LUNCH BOX) as per CSD Index no. 34380

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Nomenclature of the item)	500.0
- (Capacity of glass(ml.))	500.0
- (Capacity of Lunch Box(ml.))	500.0
- (Net weight (gms.))	500.0
- (Colour)	500.0
- (Visual Inspection)	500.0
- (Identification mark)	500.0

1317

National Test House (WR), Mumbai

Customized Specification for Frosty Buckets Buckets(25 Ltrs) as per CSD Index no. 34058 - Customized Specification for Frosty Buckets (25 Ltrs) as per CSD Index no. 34058

Customized Specification for Frosty Buckets (25 Ltrs) as per CSD Index no. 34058

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Nomenclature of Item)	500.0
- (Mouth Dia. (mm.))	500.0
- (Bottom Dia.(mm.))	500.0
- (Height(mm.))	500.0
- (Weight(Kg.))	500.0
- (Capacity(ltrs))	500.0
- (Colour)	500.0
- (Active Ingredients)	2000.0
- (Identification Marks/Marking)	500.0

1318

National Test House (WR), Mumbai

Customized Specification for Milton Elegance/Novelty Beauty Bucket as per CSD Index no. 34059 - Customized Specification for Milton Elegance/Novelty Beauty Bucket as per CSD Index no. 34059

Customized Specification for Milton Elegance/Novelty Beauty Bucket as per CSD Index no. 34059

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Nomenclature)	500.0
- (Maximum Diameter(mm.))	500.0
- (Height (mm.))	500.0
- (Weight (gms.))	500.0
- (Capacity(ltrs.))	500.0
- (Colour)	500.0
- (Visual inspection of parts)	500.0
- (Active Ingredients)	2000.0

1319

National Test House (WR), Mumbai

Customized Specification for Bucket as per CSD Index no. 34038 L - Customized Specification for Bucket as per CSD Index no. 34038 L

Customized Specification for Bucket as per CSD Index no. 34038 L

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Visual inspection)	500.0
- (Outer Dia from top (mm.))	500.0
- (Height(mm.))	500.0
- (Weight(gms.)with handle)	500.0
- (Capacity(Ltrs)approx)	500.0
- (Colour)	500.0
- (Active Ingredients)	2000.0
- (Visual inspection of parts)	500.0

1320

National Test House (WR), Mumbai

Customized Specification for Bucket as per CSD Index no. 34036 D D - Customized Specification for Bucket as per CSD Index no. 34036 D

Customized Specification for Bucket as per CSD Index no. 34036 D

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Outer dia from Top(mm.))	500.0
- (Height (mm.))	500.0
- (Weight(gms))	500.0
- (Capacity(Ltrs))	500.0
- (Colour)	500.0
- (Active Ingredients)	2000.0
- (Visual inspection of parts)	500.0
- (Visual inspection)	500.0