| 1171 |
National Test House (NR), Ghaziabad
| IS 4253 : Part 2 (2008) - Cork composition sheets - Specification: Part 2 cork and rubber (Second Revision) |
Cork composition sheets - Specification: Part 2 cork and rubber (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Clause 4 (Thickness) |
1000.0 |
|
| Table 1 (Hardness, IRHD) |
1000.0 |
|
| Clause 4.3.2.1 (Dimensional Stability @Low Humidity) |
2000.0 |
|
| Clause 4.3.2.2 (Dimensional Stability @High Humidity) |
2000.0 |
|
| Clause 8.4 (Tensile Strength) |
2000.0 |
|
| Clause 8.5 (Compressibility and Recovery) |
2000.0 |
|
| Clause 8.6 (Compression Set) |
2000.0 |
|
| Clause 8.7 (Flexibility) |
1000.0 |
|
| Clause 8.8 (Fluid Resistance Test) |
2000.0 |
|
| Clause 8.9 (pH Value) |
1000.0 |
|
| Clause 8.9 (Chloride Content) |
2000.0 |
|
| Clause 8.9 (Sulphate Content) |
2000.0 |
|
|
| 1172 |
National Test House (ER), Kolkata
| Customized specification China Clay (2024) - Customized specification China Clay |
Customized specification China Clay |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Silica(As SiO2),% by mass) |
2000.0 |
|
| 2 (Aluminum oxide(as Al2O3),% By mass) |
1200.0 |
|
| 3 (Titanium dioxide (TiO2),% by mass) |
2500.0 |
|
| 4 (Brightness %) |
1200.0 |
|
|
| 1173 |
National Test House (NR), Ghaziabad
| IS 2721 (2003) - Galvanized steel chain link fence fabric - Specification (Second Revision) |
Galvanized steel chain link fence fabric - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9.2 (Uniformity of Zn coating) |
1000.0 |
|
| 2 (Chemical analysis) |
2500.0 |
|
| 8 (Mass of Zinc Coating) |
2000.0 |
|
| 9.1.4 (Bend Test) |
1000.0 |
|
| 9.1.3 (Twist test) |
1000.0 |
|
| 9.1.2 (Wrapping test) |
1000.0 |
|
| 9.1.1 (Tensile strength) |
3000.0 |
|
| 7 (Workmanship & Finish) |
1000.0 |
|
| 6.5 (Dimensions) |
250.0 |
|
| 6.4 (Dimensions) |
250.0 |
|
|
| 1174 |
National Test House (ER), Kolkata
| 8419 (1977) - Requirement of Filtration Equipment (Part 1) Filtration Media - Sand and Gravels |
Requirement of Filtration Equipment (Part 1) Filtration Media - Sand and Gravels |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 2.1 (Effective Size (Particle diameter corresponding to 10% fines) [IS 2720 Part IV]) |
3000.0 |
|
| 2.2 (Uniformity Coefficient (The ratio D60/D10 Particle diameter corresponding to 60% and 10% fines) [IS 2720 Part IV]) |
3000.0 |
|
| 3.1.1 (Specific Gravity [IS 2386 (Part 3)]) |
1000.0 |
|
| 3.1.1 (Silica Content [IS 2000], %) |
3000.0 |
|
|
| 1175 |
National Test House (ER), Kolkata
| CUSTOM (2024) - RDSO PAINT 2024 |
RDSO PAINT 2024 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (AMINE VALUE TEST (as per annexure III of MDTS 48279 Rev 4)) |
1.0 |
|
|
| 1176 |
National Test House (ER), Kolkata
| CUSTOM - NTH PAINT 2024 |
NTH PAINT 2024 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Colour (Magnolia 0387)) |
1200.0 |
|
| 2 (Gloss Performance) |
1200.0 |
|
| 3 (Scratch Resistance) |
1200.0 |
|
| 4 (Light Reflectance) |
1200.0 |
|
| 5 (Surface spread of fire test) |
2000.0 |
|
| 6 (Smoke emission) |
1200.0 |
|
| 7 (Resistance to salt solution/ Salt spray Test, 96 Hours) |
4800.0 |
|
| 8 (Degree of luminosity) |
2400.0 |
|
| 9 (Pull of adhesion test) |
3600.0 |
|
|
| 1177 |
National Test House (ER), Kolkata
| IS 13184:1991-RA (2020) (1991) - EPOXY MASTIC FILLER |
EPOXY MASTIC FILLER |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.2 (Hold out Property) |
1200.0 |
|
| 4.2 (Dry Film Thickness) |
1200.0 |
|
| 4.2 (Rubbing Property) |
1200.0 |
|
| 4.2 (Keeping property) |
5000.0 |
|
| 4.2 (Drying time (Surface dry and Hard dry)) |
1200.0 |
|
| 4.2 (Adhesion and compatibility) |
3500.0 |
|
| 4.2 (VOC) |
2500.0 |
|
| 4.2 (Pot Life) |
1200.0 |
|
| 4.2 (Consistency) |
1200.0 |
|
| 4.2 (Finish) |
1200.0 |
|
| 4.2 (Colour) |
1200.0 |
|
| 4.2 (Flash point (both pack)) |
2400.0 |
|
|
| 1178 |
National Test House (NR), Ghaziabad
| IS 17505(Part-1):2021 - Specification for Thermosetting Insulated Fire Survival Cables for Fixed Installation having Low Emission of Smoke and Corrosive Gases when Affected by Fire for Working Voltages upto and including 1100 Vac and 1500 Vdc |
Specification for Thermosetting Insulated Fire Survival Cables for Fixed Installation having Low Emission of Smoke and Corrosive Gases when Affected by Fire for Working Voltages upto and including 1100 Vac and 1500 Vdc |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 17.1 (Tests) |
85000.0 |
|
| 17.1{i)b,ii),iii),iv)a),b)c),d),e),f) (or) g),h),j),k),m),n),q),vi)} (Tests) |
93000.0 |
|
| 17.1{i)b,ii),iii),iv)a),b)c),d),e),f) (or) g),h),j),k),m),n),q),vi)} (Tests) |
95000.0 |
|
| Tests(2 Core) (Construction of Conductor,Thickness of Insulation and Outer Sheath,Armour Thickness,Hot Set Test,Tensile Test & Elongation at Break(Before Ageing) of Outer Sheath,Conductor Resistance Test,High Voltage Test (At Room Temperature) and Smoke Density Test(ASTMD 2843) and all other tests on the lines of IS 17505(part-1).Test Parameters requirements as per CPWD,NIT Document.) |
14000.0 |
|
| 17.1 (ii)Test for armouring wires,iii)Tests for thickness of insulation and sheath,iv) Tests for insulation and Outer sheath: a) Tensile strength and elongation at break before ageing,,d) Shrinkage test and n) Smoke density.) |
49000.0 |
|
| Sl.No(b) to (g) of Cl.17.2.1 (Conductor resistance test,Test for thickness of insulation and sheath,Tensile strength and elongation at break test of insulation and sheath, Hot set test for insulation and sheath ,High voltage test and Insulation resistance (volume resistivity) test) |
13500.0 |
|
| Test(2 Core) (Resistance Test) |
4000.0 |
|
| Additional Core (---) |
4000.0 |
|
|
| 1179 |
National Test House (ER), Kolkata
| IS/IEC 60068-2-14 (2009) - Environmental testing - Part 2 Tests :Section 14 Test N: Change of temperature |
Environmental testing - Part 2 Tests :Section 14 Test N: Change of temperature |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7 (Rapid change of temperature: TA: -10 deg C, TB: 55 deg C, t1: 1 hour, No of test cycles: 5) |
20000.0 |
|
| 8 (Change of temperature: TA: -10 deg C, TB:55 deg C, Rate of change in temperature:1 deg C/min, t1: 1 hour , No of cycle : 5 . :) |
10000.0 |
|
|
| 1180 |
National Test House (SR), Chennai
| IS 1060(Part 1):1966 - Paper |
Paper |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 1181 |
National Test House (SR), Chennai
| IS 1060 - METHODS OF SAMPLING AND TEST FOR PAPER AND ALLIED PRODUCTS |
METHODS OF SAMPLING AND TEST FOR PAPER AND ALLIED PRODUCTS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 1182 |
National Test House (ER), Kolkata
| CUSTOM - Texture Paint |
Texture Paint |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Volume solid) |
2000.0 |
|
| 2 (Non- Volatile content) |
1200.0 |
|
| 3 (Dry Film Thickness) |
1200.0 |
|
| 5 (pH) |
1200.0 |
|
| 6 (Viscosity) |
1200.0 |
|
| 7 (Theoretical Coverage Capacity) |
1200.0 |
|
| 8 (Pull Of adhesion test) |
3500.0 |
|
| 9 (Scratch Hardness Test (96 hrs Air drying + 2000 grams Load)) |
1200.0 |
|
| 10 (Salt Spray test (96 Hrs)) |
4800.0 |
|
| 4 (Drying time (Touch dry and Hard Dry)) |
1200.0 |
|
|
| 1183 |
National Test House (WR), Mumbai
| Custom specification for General Chemical -NTH WR - Custom specification for General Chemical -NTH WR |
Custom specification for General Chemical -NTH WR |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Identification of material) |
2000.0 |
|
| - (Volatile Organic Compounds) |
4000.0 |
|
| - (% Retention on 63 Micron sieve) |
1500.0 |
|
| - (Volume of a Cup) |
2000.0 |
|
|
| 1184 |
National Test House (WR), Mumbai
| Custom specification for Fire & Flammability - Custom specification for Fire & Flammability- NTH WR chemical |
Custom specification for Fire & Flammability- NTH WR chemical |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Flammability) |
3000.0 |
|
| - (Fire Resistance) |
3000.0 |
|
|
| 1185 |
National Test House (NR), Ghaziabad
| As per Customer specification - Heat Resistance Test 120 degree Celsius for 3 hours. As per Appendix -II Ease of Cleaning (Rating of 8 and above) As per Appendix -III |
Heat Resistance Test 120 degree Celsius for 3 hours. As per Appendix -II Ease of Cleaning (Rating of 8 and above) As per Appendix -III |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 28594 (Heat Resistance Test 120 degree Celsius for 3 hours.) |
3000.0 |
|
|
| 1186 |
National Test House (WR), Mumbai
| Customized Specification For Printed Paper - Customized Specification For Printed Paper |
Customized Specification For Printed Paper |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (GSM (Gram Per Square Meter)) |
1000.0 |
|
|
| 1187 |
National Test House (ER), Kolkata
| Thermal Ageing & Environmental Test for RTD - Thermal Ageing & Environmental Test for RTD |
Thermal Ageing & Environmental Test for RTD |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| A1 (Thermal Ageing & Environmental Test for RTD) |
20000.0 |
|
|
| 1188 |
National Test House (NR), Ghaziabad
| 516 (2018 and 2020) - Hardened Concrete —Methods of Test Part 5 Non-destructive Testing of Concrete |
Hardened Concrete —Methods of Test Part 5 Non-destructive Testing of Concrete |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Part 5 Section 4 Cl 6 (Rebound Hammer Test) |
4000.0 |
|
|
| 1189 |
National Test House (ER), Kolkata
| IS 894 (2023) - SPECIFICATION FOR HANDLOOM WOOL BLANKETS BRICK RED |
SPECIFICATION FOR HANDLOOM WOOL BLANKETS BRICK RED |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table 2 (Fibre Composition) |
2000.0 |
|
| Table-1 (Ends per inch) |
1000.0 |
|
| Table-1 (Picks per inch) |
1000.0 |
|
| Table-1 (Breaking Load, kgs) |
2000.0 |
|
| Table-1 (Weight per square meter (GSM)) |
1000.0 |
|
| Table-1 (Type of Weaves) |
1000.0 |
|
| Table 2 (Colour fastness to Light) |
3000.0 |
|
| Table 2 (Colour fastness to Washing) |
2000.0 |
|
| Table 2 (Colour fastness to Rubbing) |
2000.0 |
|
|
| 1190 |
National Test House (NR), Ghaziabad
| IS 9385 (1980) - SPECIFICATION FOR HIGH VOLTAGE FUSES
(EXPULSION AND SIMILAR FUSES) |
SPECIFICATION FOR HIGH VOLTAGE FUSES
(EXPULSION AND SIMILAR FUSES) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 1191 |
National Test House (NR), Ghaziabad
| FCO 1985 NANO FERTILISER - The Fertiliser (Inorganic, Organic or Mixed) (Control) Order 1985 (As amended up to October 2024) |
The Fertiliser (Inorganic, Organic or Mixed) (Control) Order 1985 (As amended up to October 2024) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Schedule VII Clause 20 D(1) (As per Annexure (Attached)-NON NABL) |
7500.0 |
|
|
| 1192 |
National Test House (NR), Ghaziabad
| FCO 1985 (as amended upto November 2023) - FCO 1985 (as amended upto October 2024) |
FCO 1985 (as amended upto October 2024) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Schedule 1 Part A (ALL tests as per FCO-1985(PLEASE SEE THE ANNEXURE)-NABL (Schedule 1 Part A (ALL tests as per FCO-1985(PLEASE SEE THE ANNEXURE)-NABL) |
7000.0 |
|
| Schedule 1 Part A (ALL tests as per FCO-1985(PLEASE SEE THE ANNEXURE)-NON-NABL (Schedule 1 Part A (ALL tests as per FCO-1985(PLEASE SEE THE ANNEXURE)-NON-NABL) |
7000.0 |
|
|
| 1193 |
National Test House (ER), Kolkata
| IS 9968 (Part-1) 1988 (1988) - SPECIFICATlON FOR ELASTOMER INSULATED CABLES |
SPECIFICATlON FOR ELASTOMER INSULATED CABLES |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 21.2.(a) (Annealing Test (For Copper)) |
1000.0 |
|
| 21.2.(b) (Tensile test ( for alummrum )) |
1000.0 |
|
| 21.2.(c) (wrapping test ( for aluminium );) |
500.0 |
|
| 21.2.(d) (Conductor resistance test) |
1500.0 |
|
| 21.2.(e) (Test for thickness of insulation and sheath.and overall diameter ( where specified )) |
1000.0 |
|
| 21.2.(f) (Tensile strength and elongation at break of insulation and sheath) |
1500.0 |
|
| 21.2.(g) (Hot set test for insulation and sheath) |
1000.0 |
|
| 21.2.(h) (High voltage test) |
3000.0 |
|
| 21.2.(i) (Insulation resistance test) |
2000.0 |
|
| - (Test on 2nd core) |
2000.0 |
|
| - (Test on 3rd core) |
2000.0 |
|
|
| 1194 |
National Test House (ER), Kolkata
| IS:1554 ( Part 1 ) - 1988 (1988) - SPECIFICATION FOR PVC INSULATED ( HEAVY DUTY ) ELECTRIC CABLES |
SPECIFICATION FOR PVC INSULATED ( HEAVY DUTY ) ELECTRIC CABLES |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 15.1(a).(1),15.2(a) (Annealing test ( for copper )) |
1000.0 |
|
| 15.2(b),15.1(a).(2) (Tensile test ( for aluminium )) |
1000.0 |
|
| 15.1(a).(3),15.2(c) (Wrapping test ( for aluminium )) |
500.0 |
|
| 15.1(a).(4),15.2(d),15.3(a) (Conductor resistance test) |
2000.0 |
|
| 15.2(e),15.1(c) (Test for thickness of insulation and sheath) |
1000.0 |
|
| 15.2(f), (Tensile strength and elongation at break of insulation and sheath) |
1000.0 |
|
| 15.2(g),15.1(e) (Insulation resistance test) |
1500.0 |
|
| 15.2(h),15.1(g) (High voltage test at room temperature) |
1000.0 |
|
| 15.1.1 , 15.2.1 (Oxygen index test) |
5000.0 |
|
| 15.1.1 , 15.2.1 (Temperature index) |
5000.0 |
|
| 15.1.1 , 15.2.1 (Flame retmdance test on single cable) |
5000.0 |
|
| 15.1.1 (Flame retardance test on bunched cables) |
5000.0 |
|
| 15.1.1 , 15.2.1 (Test for halogen acid gas evolution) |
5000.0 |
|
| 15.1.1 , 15.2.1 (Smoke density) |
5000.0 |
|
| 15.1(b) (Test for armouring wires/strips-Dimension) |
1000.0 |
|
| 15.1(b) (Test for armouring wires/strips - Tensile strength) |
1000.0 |
|
| 15.1(b) (Test for armouring wires/strips - Elongation at break) |
1000.0 |
|
| 15.1(b) (Test for armouring wires/strips - Torsion test for round wires) |
1000.0 |
|
| 15.1(b) (Test for armouring wires/strips - Winding test for formed wires) |
1000.0 |
|
| 15.1(b) (Test for armouring wires/strips - Uniformity of zinc coating) |
1000.0 |
|
| 15.1(b) (Test for armouring wires/strips - Mass of zinc coating) |
2000.0 |
|
| 15.1(b) (Test for armouring wires/strips - Resistivity) |
2000.0 |
|
| 15.1(d) (Physical tests for insulation and outer sheath: - Tensile strength and elongation at break) |
1500.0 |
|
| 15.1(d) (Physical tests for insulation and outer sheath: - Ageing in air oven) |
2000.0 |
|
| 15.1(d) (Physical tests for insulation and outer sheath: - Shrinkage test) |
500.0 |
|
| 15.1(d) (Physical tests for insulation and outer sheath: - Hot deformation) |
500.0 |
|
| 15.1(d) (Physical tests for insulation and outer sheath: - Loss of mass in air oven) |
1500.0 |
|
| 15.1(d) (Physical tests for insulation and outer sheath: - Heat shock test) |
500.0 |
|
| 15.1(d) (Physical tests for insulation and outer sheath: - Thermal stability) |
1000.0 |
|
| 15.1(f) (High voltage test ( water immersion test )) |
3000.0 |
|
| 15.1(h) (Flammability test) |
500.0 |
|
| - (Test on 2nd core) |
2000.0 |
|
| - (Test on 3rd core) |
2000.0 |
|
| - (Test on 4th core) |
2000.0 |
|
|
| 1195 |
National Test House (NWR), Jaipur
| IS: 1708 (Parts 1 to 18) : 1986 - Methods of Testing of Small Clear Specimens of Timber [Extra] |
Methods of Testing of Small Clear Specimens of Timber |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Part 1,Clause 4 (Moisture Content) |
1000.0 |
|
| Part 2,Clause 4.1.a (Specific gravity) |
500.0 |
|
| Part 8,Clause 4.1.ii (Compressive strength-Parallel to grain
[Compressive stress at maximum load]) |
1500.0 |
|
| Part 5,Clause 4.2.ii (Equivalent fibre stress at maximum load ( modulus of rupture - M of R )) |
3000.0 |
|
|
| 1196 |
National Test House (NR), Ghaziabad
| EN 50386 (2010) - Brushings up to 1 kV and from 250A to 5kA for liquid filled transformers |
Brushings up to 1 kV and from 250A to 5kA for liquid filled transformers |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.5 (Power frequency withstand voltage) |
10000.0 |
|
| 3.6 (Dimensions) |
2000.0 |
|
| 3.7 (Cantilever load withstand test) |
3000.0 |
|
|
| 1197 |
National Test House (NWR), Jaipur
| IS 2266 (2019) - Steel Wire Ropes for General Engineering Purpose |
Steel Wire Ropes for General Engineering Purpose |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Diameter) |
1000.0 |
|
| 5 (Breaking Force) |
3000.0 |
|
|
| 1198 |
National Test House (NWR), Jaipur
| IS 2266 (2019) - Steel Wire Ropes for General Engineering Purpose —Specification |
Steel Wire Ropes for General Engineering Purpose —Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 1199 |
National Test House (NWR), Jaipur
| ISO 4427 (Part 1 & 2) - Polyethylene pipes and fittings for water supply |
Polyethylene pipes and fittings for water supply |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.1.1.13 (Wall Thickness) |
1000.0 |
|
| 4.2.1 (Colour) |
1000.0 |
|
| 7.2 (Hydrostatic strength at 20 deg.c for 100 hours) |
12000.0 |
|
| 7.2 (Hydrostatic strength at 80 deg.c for 165 hours) |
20000.0 |
|
| 8.2 (Elongation at Break) |
2000.0 |
|
| 8.2 (Longitudinal reversion) |
2000.0 |
|
| 8.2 (Melt Mass Flow Rate(MFR)) |
2000.0 |
|
| 8.2 (Oxidation Induction Time(OIT)) |
2000.0 |
|
| 3.1.1.5 (Mean Outside Diameter) |
1000.0 |
|
| 3.1.1.8 (Ovality) |
1000.0 |
|
|
| 1200 |
National Test House (NWR), Jaipur
| 15466 (2004) - RUBBER SEALS FOR HYDRAULIC GATES |
RUBBER SEALS FOR HYDRAULIC GATES |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.0 (Tests) |
10000.0 |
|
| 4.0 (Elongation at break (IS:3400 Part-1)) |
2000.0 |
|
| 4.0 (Tensile Strength (IS:3400 Part-1)) |
2000.0 |
|
| 4.0 (Mass of water absorbed (IS:3400 Part-6)) |
2000.0 |
|
|