NTH - Management Information System

Search by Standard No.

Reset

4078 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

1141

National Test House (WR), Mumbai

NTH(WR)/MECH/CUSTOM/022-CSD-TDS-Durastone Cookware HA Stone Non-Stick BYK -Tawa (2024) - CSD-TDS-Durastone Cookware HA Stone Non-Stick BYK -Tawa

CSD-TDS-Durastone Cookware HA Stone Non-Stick BYK -Tawa

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Identification and Marking)	-
2 (Product Dimension, in mm as per TDS / relevant Product IS specification)	1000.0
3 (Weight in g as per TDS / relevant Product IS specification)	1000.0
4 (Capacity in L, as per TDS / relevant Product IS Specification)	500.0
5 (Workmanship and Finish- Visual Examination as per IS 1660 / relevant product specification of National or International standard Test method specified)	500.0
6 (Non-Stick Coating thickness, in µm as per IS 9730 / IS 6012 or any other relevant International or National standard test method specified)	2000.0
7 (Non-Stick Quality test, (Coating shall permit the test foods to be removed intact & coating surfaces to be wiped clean.) as per IS 1660 or relevant product specification or any other International / National Standard test method)	1000.0
8 (Finish of the coating - Visual Defects Test as per IS 1660 or any other International/national Standard or relevant product specification. Non-stick coatings shall be free from defects visible to naked eye.)	1000.0
9 (Salt-Water Corrosion Test, As per IS 9730 No defects additional to those initially present shall be observed in the coating.)	2000.0
10 (Adhesion Test – Cross hatch Test, As per IS 9730 No complete squares and not more than 5 percent of the total cross hatched area of the coating shall be lifted from the base and wall of the utensil.)	2000.0
11 (Adhesion Test – Peel Test,As per IS 9730 Peeled away coating length shall not be greater than 2 mm.)	2000.0
12 (Abrasion Resistance, As per IS 1660:2009 When the coating surface is rubbed two or three times with emery paper or emery cloth with emery conforming to grit number 180 of IS 715 ( Part 1) using medium finger pressure, it shall not abrade the surface but shall skid over the surface showing not more than a trace of whitening of the surface.)	500.0
13 (Hardness Test as per IS 1660:2009)	500.0
14 (Test on Handle- Visual Examination as per IS 1660 Handle shall be sufficiently strong to support a mass in the utensil equivalent to three times the mass of the water capacity of the utensil in the position of normal use without visible permanent deformation of the handle or utensil)	500.0
15 (Body Assembly-Visual as per TDS / IS 1660 Stay cool handle fitted to body)	1000.0
16 (Coating Thickness by Microscopic Method as per IS 5523)	2500.0
17 (Material of Utensil as per TDS declaration /IS 21 / IS 1660 / any other relevant product specification specified National or International Standard Test Method)	3500.0
18 (Material of Lid as per TDS Declaration / IS 1660 refered product specification and method / any other relevant product specification specified in the international or National standard)	3500.0

1142

National Test House (WR), Mumbai

IS 1660 (2024) - Wrought aluminium utensils - Specification (Second Revision)

Wrought aluminium utensils - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Dimension, mm)	1000.0
8 (Workmanship & finish)	1000.0
7.2 (Test on Handle)	500.0
8.4.1.2 (Finish of the coating)	500.0
8.4.2 (Coating thickness test)	2500.0
8.4.3 (Abrasion resistance test)	500.0
8.4.5 (Hardness test)	500.0
4 (Materials of Lid)	3500.0
4 (Materials of utensil)	3500.0
TDS-1 (Weight)	500.0
8.5 (Non-Stick Unreinforced Plastics Coatings on Domestic Cooking Utensils)	8000.0
8.5 (Coating thickness test as per IS 9730)	2000.0
TDS-2 (Capacity , ml)	500.0

1143

National Test House (WR), Mumbai

IS 2074 : 2023 (2023) - READY MIXED PAINT, AIR DRYING, RED OXIDE-ZINC CHROME PRIMING ― SPECIFICATION

READY MIXED PAINT, AIR DRYING, RED OXIDE-ZINC CHROME PRIMING ― SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (Composition)	300.0
5.3 (Compatibility with Thinner)	100.0
5.4 (Freedom from Objectionable Impurities)	100.0
5.5 (Lead Restriction)	100.0
Table 1 (Consistency (Annexure C))	100.0
Table 1 (Viscosity by ford cup No. 4 at 27±2°C ((Part l/Sec 5))	500.0
Table 1 (Mass, in kg/10 l, (Part l/Sec 7))	500.0
Table 1 (Drying time, h, Max: a) Surface dry ((Part 3/Sec 1))	500.0
Table 1 (Drying time, h, Max: a) Hard dry ((Part 3/Sec 1))	500.0
Table 1 (Finish, (IS 101 Part 3/Sec 4))	500.0
Table 1 (Gloss 60°, Max (IS 101 Part 4/ sec 4))	500.0
Table 1 (Fineness of grind, microns, Max (IS 101 Part 3/Sec 5))	500.0
Table 1 (Colour (IS 101 (Part 4/Sec 2)))	500.0
Table 1 (Flexibility and adhesion: a) Bend test with 6.25mm dia mandrel and in type 1 apparatus) (IS 101 (Part 5/Sec 2)))	500.0
Table 1 (Flexibility and adhesion: b) Scratch hardness ( Load 1 000g ) (IS 101 (Part 5/Sec 2)))	500.0
Table 1 (Flash point (IS 101 (Part l/Sec 6)))	500.0
Table 1 (Volume solids, (IS 101 (Part 8/Sec 6)))	1.0
Table 1 (Resistance to humidity under conditions of condensation a) Resistance to humidity, (IS 101 (Part 6/Sec 1)))	499.0
Table 1 (b) Resistance to seawater (applicable for marine paints only), Annexure D)	1000.0
Table 1 (Accelerated storage stability test, Annexure F)	500.0
Table 1 (Keeping properties for 12 Months, (IS 101 (Part 6/Sec 2)))	5000.0
Table 2 (Consistency, Annexure C of IS 2074)	300.0
Table 2 (Hard dry, h, Max (IS 101 (Part 3/Sec 1)))	500.0
Table 2 (Non- volatile vehicle, (IS 101 (Part 8/Sec 2)))	500.0
Table 1 (Wet opacity, (IS 101 (Part 4/ Sec 1)))	500.0
Table 1 (c) Resistance to salt spray, (Annexure E of 2074), (IS 101 (Part 6/Sec 1)))	500.0

1144

National Test House (NR), Ghaziabad

IS 1202-2021 (2021) - Method for Testing Tar and Bituminous Materials-Determination of Specific Gravity

Method for Testing Tar and Bituminous Materials-Determination of Specific Gravity

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2.1 (Specific Gravity of Bitumen)	2000.0

1145

National Test House (ER), Kolkata

IS 14887 (2014) - Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packaging of 50 kg food grains – Specification (first revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1.1 (Ash Content)	2000.0
4.1.1 (Avg. Breaking Strength and Elongation of fabric after UV exposure)	2000.0
4.1.1 (Elongation at break of fabric, Widthwise)	2000.0
4.1.1 (Elongation at break of fabric, Lengthwise)	2000.0
4.1.1 (Minimum Breaking Strength of bottom seam)	2000.0
4.1.1 (Avg. Breaking Strength of fabric, Widthwise)	2000.0
4.1.1 (Avg. Breaking Strength of fabric, Lengthwise)	2000.0
4.1.1 (Mass of Sack)	1000.0
4.1.1 (Capacity)	2000.0
4.1.1 (Picks/dm)	1000.0
4.1.1 (Ends/dm)	1000.0
4.1.1 (Dimensions, Inside Width)	1000.0
4.1.1 (Dimensions, Inside Length)	1000.0
4.1 (Mass of Bale)	1000.0
4.2 (UV Resistant Test(192 hrs.))	9600.0
4.2 (GSM of Fabrics)	1000.0

1146

National Test House (SR), Chennai

IS 1586 : Part 1 (2025) - Metallic Materials - Rockwell Hardness Test - Part 1 Test Method

Metallic Materials - Rockwell Hardness Test - Part 1 Test Method

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Hardness)	2000.0

1147

National Test House (NR), Ghaziabad

EN 10084 (2008) - CASE HARDENED STEEL

CASE HARDENED STEEL

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table 3 (Carbon)	1500.0
Table 3 (Silicon)	1500.0
Table 3 (Manganese)	1000.0
Table 3 (Phosphorus)	2000.0
Table 3 (Sulphur)	1000.0
Table 3 (Chromium)	1000.0
Table 3 (Molybdenum)	1000.0
Table 3 (Nickel)	1000.0
CLAUSE- 7.3.1 (Grain Size)	3000.0
Clause 7.3.2.1 (Microscopic Inclusions)	4000.0
Cl 1 Table 1 (Brinell Hardness (HBW))	2000.0

1148

National Test House (WR), Mumbai

Customized Specification for ILC of Paper - Customized Specification for ILC of Paper

Customized Specification for ILC of Paper

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Ash at 900 deg. C as per IS 1060(Part 5/Sec 3))	-
- (ISO Brightness as per IS 1060(part 4/Sec 13))	-
- (Opacity as per IS/ISO 2471)	-

1149

National Test House (WR), Mumbai

IBR 1950 (2023) - Qualified Boiler Welder's Certificate

Qualified Boiler Welder's Certificate

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IBR 1950 (Welder qualification)	4500.0
IBR-1950, Chapter -XIII (IBR Welder Test - Tube/Pipe (MMAW)- Horizontally Fixed)	3500.0
IBR-1950, Chapter -XIII (IBR Welder Test - Tube/Pipe (GTAW+ MMAW)- Horizontally Fixed)	4500.0
NTH Additional Charges for Testing (Scientist Charges)	5000.0
IBR-1950, Chapter -XIII (IBR Welder Test - Tube/Pipe (GTAW+ MMAW)- Vertically Fixed)	4500.0
IBR-1950, Chapter -XIII (IBR Welder Test - Tube/Pipe (MMAW)- Vertically Fixed)	3500.0
Chapter XIII (Certification of welder per position of welding on Plate (SMAW/FCAW) (Plate and Electrodes not supplied by NTH))	3000.0
Chapter XIII (Certification of welder on Pipe & Branch Pipe by TIG/GTAW)	9000.0
Chapter XIII (Certification of welder per position of welding on Pipe/Tube by MMAW)	4500.0
Chapter XIII (Certification of welder per position of welding on Pipe by TIG/GTAW)	4500.0
Chapter XIII (Certification of welder per position of welding on Tube by TIG/GTAW)	4500.0
Chapter XIII (Certification of welder per position of welding on Plate (SMAW+TIG / GTAW)(Plate and Electrodes not supplied by NTH))	3500.0

1150

National Test House (SR), Chennai

14255 (1995) - Aerial Bunched Cables for working voltages up to and including 1100 Volts-Reaffirmed 2020 specification

Aerial Bunched Cables for working voltages up to and including 1100 Volts-Reaffirmed 2020 specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.1 sl no 1(a)(i), 10.2 (a) (Tensile Test on phase/ street light conductor)	1000.0
10.1 sl no 1(a)(ii), 10.2 (b) (Wrapping Test on phase/ street light conductor)	500.0
10.1 sl no 1(a)(iii) (Resistance Test on phase/ street light conductor)	2000.0
10.1 sl no 1(b)(i) ,10.2 sl no(c) (Test on messenger conductor Breaking load)	1000.0
10.1 sl no 1(b)(ii), 10.2 (d) (Test on messenger conductor Elongation test)	1500.0
10.1 sl no 1(c)(i),10.2 (g) (Physical test for XLPE insulation Tensile strength and elongation at break)	1500.0
10.1 sl no 1(c)(ii) (Physical test for XLPE insulation Ageing in air oven)	2000.0
10.1 sl no 1(c)(iii),10.2(h) (Physical test for XLPE insulation Hot set test)	2000.0
10.1 sl no 1(c)(iv) (Physical test for XLPE insulation Shrinkage)	1000.0
10.1 sl no 1(c)(v) (Physical test for XLPE insulation Water absorption test)	1000.0
10.1 sl no 1(d)(i) (Physical test for PE insulation Tensile strength and elongation at break)	1500.0
10.1 sl no 1(d)(iv) (Physical test for PE insulation Vicat softening point)	1000.0
10.1 sl no 1(d)(ii) (Physical test for PE insulation Melt flow index)	1000.0
10.1 sl no 1(d)(v) (Physical test for PE insulation Environment stress cracking)	1500.0
10.1 sl no 1(e),10.2(f) (Test for thickness of insulation)	1500.0
10.1 sl no 1(f),10.2(j) (Insulation resistance (Volume Resistivity) test)	1500.0
10.1 sl no 1(g),10.2(k) (High Voltage test)	1500.0
10.2 (e) (Conductor resistance test)	2000.0
Test on 2nd core (Test on 2nd core)	2000.0
Test on 3rd core (Test on 3rd core)	2000.0
Test on 4th core (Test on 4th core)	2000.0
10.1 sl no 1(b)(iii) (Resistance test on messenger conductor)	1000.0

1151

National Test House (WR), Mumbai

Customized Specification for Nylon material - Customized Specification for Nylon material

Customized Specification for Nylon material

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Specific Gravity as per ASTM D 792)	1000.0
- (Hardness as per ASTM D 2240)	1000.0
- (Tensile Strength at yield as per ASTM D 638)	2000.0
- (Flexural Modulus as per ASTM D 790)	2000.0
- (Water absorption as per ASTM D 570)	2000.0

1152

National Test House (WR), Mumbai

Customized specification for ASTM D 638 - Customized specification for ASTM D 638

Customized specification for ASTM D 638

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Tensile Strength as per ASTM D 638)	2000.0

1153

National Test House (NR), Ghaziabad

Custom-2-NTH-LM - Straining/Intermediate Y arm

Straining/Intermediate Y arm

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Leg Length)	500.0
2 (Thickness)	500.0
3 (General Dimensions)	1000.0
4 (Tensile Strength)	1500.0
5 (Yield Strength)	1500.0
6 (Percentage Elongation)	1000.0
8 (Mass of Zinc coating)	1000.0
9 (Uniformity of coating)	500.0
10 (Powder Coating)	1000.0
7 (Carbon)	500.0
7 (Sulphur)	500.0
7 (Phosphorus)	500.0
7 (Manganese)	500.0
7 (Silicon)	500.0
7 (Carbon equivalent)	500.0
11 (Salt Spray Test for 1440 Hours)	72000.0

1154

National Test House (NR), Ghaziabad

Custom-5-NTH-LM - Wire Mesh Panel

Wire Mesh Panel

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Width)	200.0
2 (Height)	200.0
3 (Bend Test)	1000.0
4 (Panel Weight)	500.0
5 (Tensile Strength of wire)	2000.0
6 (Weld Shear Strength)	3000.0
7 (Mass of Zinc Coating)	2000.0
8 (Powder Coating Thickness)	2000.0
9 (Salt Spray Test for 1000 Hours)	50000.0
10 (Diameter of Wire)	500.0
11 (Mesh Size (c/c))	300.0
12 (Unit Weight)	500.0
13 (Ultimate Tensile Strength of wire)	2000.0
14 (Wrapping Test for Ductility)	2000.0
15 (Elongation of wire)	1000.0
16 (Carbon)	500.0
17 (Sulphur)	500.0
18 (Phosphorus)	500.0
18 (Sulphur + Phosphorus)	500.0
9 (Salt Spray Test for 1440 hours)	60000.0

1155

National Test House (NR), Ghaziabad

Custom-6-NTH-LM - G.I Welded Wire Mesh

G.I Welded Wire Mesh

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Weld Shear Test of Wire Mesh)	2000.0
2 (Tensile Strength of G.I Wire)	1500.0
3 (Mass of Zinc Coating of G.I Wire)	2000.0
5 (Yield Strength of G.I Wire)	1500.0
6 (Dimension)	4000.0

1156

National Test House (NR), Ghaziabad

Custom-1-NTH-LM - Fence Post Hollow Section and Fence Post Support Strip

Fence Post Hollow Section and Fence Post Support Strip

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Diameter of Post)	1000.0
2 (Thickness)	500.0
3 (Nominal Mass)	1000.0
4 (Tensile Strength)	1000.0
5 (Yield Strength)	1000.0
6 (Percentage Elongation at 5.65 √area)	1000.0
7 (Mass of Zinc Coating)	1000.0
8 (Uniformity of coating)	500.0
9 (Powder coating thickness)	1000.0
10 (Salt Spray Test for 1440 Hours)	72000.0
11 (Dimension of Fence Post Support Strip and anchor Rode)	2000.0

1157

National Test House (NR), Ghaziabad

IS 1566 (1982) - Specification for hard - Drawn steel wire fabric for concrete reinforcement (Second Revision)

Specification for hard - Drawn steel wire fabric for concrete reinforcement (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11.2 (Tensile Strength, Yield Strength and Elongation)	3000.0
11.3.1 (Reverse bend test)	1500.0
11.3 (Bend Test)	2000.0
6.1 (Mesh Size)	500.0
8 (Mass)	1500.0
6.1 (Diameter)	500.0
4.1 (Carbon)	500.0
4.1 (Sulphur)	500.0
4.1 (Phosphorus)	500.0

1158

National Test House (ER), Kolkata

MP/Safety/Spec./PPE/1(Ed-9) - Specification of Leather hand gloves

Specification of Leather hand gloves

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1 (Double Hole Stitch Tear Strength)	2000.0
3.2 (Shrinkage Temperature)	2000.0
3.3 (Petroleum hydrocarbon Soluble matter)	1000.0
3.4 (Chromium contents of leather(as Cr2O3))	1000.0
3.5 (pH value of aqueous extract)	1000.0
3.6 (Tear Resistance)	2000.0
3.7 (Contact Heat Resistance of Leather)	2000.0
3.8 (Weight of Fire Resistance Cloth)	1000.0
3.9 (Flammability of Fire Resistance Cloth)	5000.0
3.10 (Identification of Fire Resistance Cloth)	2000.0
3.11 (Weight of Cotton Cloth used for Hand Inner Lining)	1000.0
3.12 (Colour Of Thinsulate Insulation Lining)	500.0
3.12 (Thickness of Thinsulate Insulation Lining)	1000.0
3.13 (Melting point of Thinsulate Insulation Lining)	1000.0

1159

National Test House (NER), Guwahati

NTH/NER/Custom/2024/03- Instrumental Analysis of Steel Products (2024) - Instrumental Analysis of Steel Products

Instrumental Analysis of Steel Products

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Carbon, percent- ASTM 415/IS 8811)	1000.0
2 (Silicon, percent-ASTM 415/IS 8811)	1000.0
3 (Manganese, percent - ASTM 415/IS 8811)	1000.0
4 (Sulphur, percent - ASTM 415/IS 8811)	1000.0
5 (Phosphorous, percent - ASTM 415/IS 8811)	1000.0
6 (Aluminum, percent- ASTM 415/IS 8811)	1000.0
7 (Copper, percent - ASTM 415/IS 8811)	1000.0
8 (Nickel, percent - ASTM 415/IS 8811)	1000.0
9 (Nitrogen, percent - ASTM 415/IS 8811)	1000.0
10 (Carbon equivalent - NTH/NER/CH/SOP/OES/02, Issue No. 01)	1000.0
10 (Silicon, percent)	1000.0
11 (Magnesium, percent)	1000.0

1160

National Test House (NER), Guwahati

NTH/NER/Custom/2024/02- Customized Water Specification as per IS 10500:2012 (2024) - Customized Water Specification as per IS 10500:2012

Customized Water Specification as per IS 10500:2012

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Colour - IS 3025 (Part 4): 2021, Clause 4)	500.0
2 (Odour - IS 3025 (Part 5) : 2018)	500.0
3 (Taste - IS 3025 (Part 8) : 2023))	500.0
4 (pH value- IS 3025 (Part 11) : 2022)	500.0
5 (Turbidity - IS 3025 (Part 10) : 2023)	500.0
6 (Total Dissolved Solids - IS 3025 (Part 16) : 2023)	500.0
7 (Aluminium (as Al) - IS 3025 (Part 55): 2003)	500.0
8 (Ammonia (as total ammonia-N) - IS 3025 (Part 34/Sec 1) : 2023, Clause 5.4)	500.0
9 (Anionic detergents (as MBAS) - Annex K of IS 13428 : 2005)	500.0
10 (Barium (as Ba) - Annex F of IS 13428 : 2005)	500.0
11 (Boron (as B) - IS 3025 (Part 57): 2005)	500.0
12 (Calcium (as Ca) - IS 3025 (Part 40) : 1991, Clause 5)	500.0
13 (Chloride (as Cl) - IS 3025 (Part 32): 1988, Clause 2/IS 3025 (Part 75) : 2022)	500.0
14 (Copper (as Cu) - IS 3025 (Part 42): 1992)	500.0
15 (Fluoride (as F) - IS 3025 (Part 75) : 2022)	500.0
16 (Free residual chlorine - IS 3025( Part 26) : 2021, Clause 7)	500.0
17 (Iron (as Fe) - IS 3025 (Part 53) :2003, Clause 7)	1200.0
18 (Magnesium (as Mg) - IS 3025 (Part 46): 1994)	500.0
19 (Manganese (as Mn) - IS 3025 (Part 59): 2006)	500.0
20 (Nitrate (as NO3) - IS 3025 (Part 75): 2022)	500.0
21 (Phenolic compounds (as C6H5OH) - IS 3025 (Part 43/Sec 1): 2022, Clause 6)	500.0
22 (Selenium (as Se) - IS 3025 (Part 56): 2003)	500.0
23 (Silver (as Ag) - Annex J of IS 13428 : 2005)	500.0
24 (Sulphate (as SO4) - IS 3025 (Part 75) : 2022)	500.0
25 (Sulphide (as H2S) - IS 3025 (Part 29) : 2022, Clause 7)	500.0
26 (Total alkalinity as Calcium carbonate - IS 3025 (Part 23): 2023)	500.0
27 (Total Hardness (as CaCO3) - IS 3025 (Part 21) : 2009)	500.0
28 (Zinc (as Zn) - IS 3025 (Part 49): 1994)	500.0
29 (Cadmium (as Cd) - IS 3025 (Part 41) : 2022)	500.0
30 (Lead (as Pb) - IS 3025 (Part 47) : 1994)	500.0
31 (Mercury (as Hg) - IS 3025 (Part 48) : 1994)	500.0
32 (Nickel (as Ni) - IS 3025 (Part 54):2003)	500.0
33 (Total Arsenic (as As) - IS 3025 (Part 37): 2022)	500.0
34 (Total Chromium (as Cr) - IS 3025 (Part 52) : 2003)	500.0
35 (Escherichia coli per 100 ml)	2000.0
36 (Total Coliform Bacteria per 100 ml)	1500.0
Custom 1 (Chemical test results as per Annexure-A)	20000.0
Custom 2 (Microbiology test results as per Annexure-B)	5000.0

1161

National Test House (ER), Kolkata

EIL system no. 4_Coating system - F16+F16 = DFT 250 microns - EIL B269_000_02_042_PCS_0001 Rev_2 for EIL system no. 4

EIL B269_000_02_042_PCS_0001 Rev_2 for EIL system no. 4

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (100% Humidity test - (ASTM D2247))	20000.0
2 (Dry Heat Resistance Test (ASTM D2485 method B @ 550 deg C ))	5000.0
3 (Thermal Shock Resistance Test: 5 Cycles@30 minutes @120 Deg C and 15 minutes in water after quenching in water for each cycles, ASTM D 2485 method A)	10000.0

1162

National Test House (NER), Guwahati

CUSTOM/GEO TEXTILE/2022 - GEO TEXTILE

GEO TEXTILE

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10 (Weight(GSM))	1000.0
5.0 (Tensile Strength(MD/CD))	6000.0
6.0 (Elongation(MD/CD))	2000.0
2.0 (Standard Colour)	1000.0
13 (Tear Strength)	2000.0
3.0 (Polymer type)	5000.0
4.0 (Thickness)	1000.0

1163

National Test House (NER), Guwahati

IS 16098 Part 2 (2013) - Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (Appearance and Color )	1000.0
6.3.5 (Wall Thickness)	1000.0
6.3.2 (Length)	1000.0
6.3.1 (Diameter )	1000.0
7.2 (Resistance to Heating (Oven Test))	2000.0
5.1 (Melt Flow Rate (Base Material))	2000.0
Firm's request (Density)	1000.0

1164

National Test House (WR), Mumbai

Custom specifications for cosmetic products (2024) - Custom specifications for cosmetic products

Custom specifications for cosmetic products

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Custom specifications for cosmetic products (Please refer to the annexure for the result)	5000.0

1165

National Test House (NWR), Jaipur

IS 14268 (2022) - Uncoated stress relieved low relaxation seven - Wire (Ply) strand for prestressed concrete - Specification (First Revision)

Uncoated stress relieved low relaxation seven - Wire (Ply) strand for prestressed concrete - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Nominal Mass of strand - IS 14268: 2022.)	1500.0
6.1 (Nominal Diameter of strand- IS 14268: 2022.)	1000.0
6.2 (Length of lay of Strand- IS 14268: 2022.)	1000.0
4.2 (Centre wire shall have 1.5% greater in diameter than the surrounding wires - IS 14268: 2022.)	1000.0
Table 2 (Cl 6.2.1, Cl 6.2.2, Cl 6.3) (0.2% Proof Load, Breaking Strength of Strand, Total Elongation.)	3000.0
6.2.3 (Total Elongation under Load on gauge length of 600 mm- IS 14268: 2022.)	1000.0
6.2.2 (Breaking Load of Strand- IS 1608 (Part 1): 2022/ IS 14268: 2022.)	1000.0
6.2.2 (0.2% Proof Load of Strand - IS 1608 (Part 1): 2022/ IS 14268: 2022.)	1000.0
6.3 (Tensile Strength of Strand- IS 1608 (Part 1): 2022/ IS 14268: 2022, MPa.)	1000.0
4.1.2 (Chemical composition (Annexure for NABL parameters))	3500.0
4.1.2 (Sulphur+Phosphorus (As per IS 7904:2018))	500.0
4.5 (Visual observation)	1000.0

1166

National Test House (ER), Kolkata

IS 7809 : Part 3 : Sec 1, IS 7809 : Part 2 & IS 7809 : Part 1 (1986) - Specification for pressure sensitive adhesive insulating tapes for electrical purposes: Part 3 requirements or individual materials: Sec 1 plasticized polyvinylchloride tapes with non - Thermosetting adhesive (First Revision) & Specification for pressure sensitive adhesive insulating tapes for electrical purposes: Part 1 General requirements & Specification for pressure sensitive adhesive insulating tapes for electrical purposes: Part 2 Test Methods.

Specification for pressure sensitive adhesive insulating tapes for electrical purposes: Part 3 requirements or individual materials: Sec 1 plasticized polyvinylchloride tapes with non - Thermosetting adhesive (First Revision) & Specification for pressure sensitive adhesive insulating tapes for electrical purposes: Part 1 General requirements & Specification for pressure sensitive adhesive insulating tapes for electrical purposes: Part 2 Test Methods.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.2 (Width)	500.0
3.3 (Length)	500.0
3.4 (Thickness)	1000.0
4.1 (Tensile Strength)	1500.0
4.2 (Adhesion to Steel)	2000.0
4.3 (Adhesion to Backing)	2000.0
4.6 (Flammability)	5000.0

1167

National Test House (NR), Ghaziabad

IS 1708(Parts 1-18)1986: RA 2020 - METHODS OF TESTING OF SMALL CLEAR SPECIMENS OF TIMBER

METHODS OF TESTING OF SMALL CLEAR SPECIMENS OF TIMBER

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Moisture content (IS 1708(1):1986))	1000.0
2 (Specific gravity (IS 1708(2):1986))	500.0

1168

National Test House (NR), Ghaziabad

IS IS 1708 : Part 1 (1986) - Timber

Timber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Moisture Content)	1000.0

1169

National Test House (WR), Mumbai

Customized specification for Bharat Bucket Plastic 18 Ltr as per CSD Index no. 34037 - Customized specification for Bharat Bucket Plastic 18 Ltr as per CSD Index no. 34037

Customized specification for Bharat Bucket Plastic 18 Ltr as per CSD Index no. 34037

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Nomenclature of the item)	500.0
- (Outer dia.from top(approx))	500.0
- (Height(approx))	500.0
- (Weight with tolerance)	500.0
- (Capacity with tolerance)	500.0
- (Colour)	500.0
- (Active ingredients (HDPE))	2000.0
- (Parts and their specifications)	500.0
- (Identification Marks /Marking)	500.0

1170

National Test House (WR), Mumbai

Customized specification for Bharat Marvel Bucket (Big) as per CSD Index no. 34455 - Customized specification for Bharat Marvel Bucket (Big) as per CSD Index no. 34455

Customized specification for Bharat Marvel Bucket (Big) as per CSD Index no. 34455

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Nomenclature of Item)	500.0
- (Dimensions with tolerances)	500.0
- (Weight with tolerance)	500.0
- (Active ingredients(PP/HD Powder))	2000.0
- (Identification Marks/marking)	500.0