NTH - Management Information System

Search by Standard No.

Reset

3985 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

1111

National Test House (SR), Chennai

IS 1180 : Part 1 (2014) - Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) (1100 kVA to 2 500 kVA) [1100 kVA to 2 500 kVA]

Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) (1100 kVA to 2 500 kVA)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test))	20000.0
21.3(b) (Temperatur Rise Test)	40000.0
21.2(g) (Separate Source AC voltage withstand test)	2500.0
21.5.1.221.5.2.221.5.3.2 (Pressure test (routine))	5000.0
21.4.(d) (Adhesion by Tape Test)	5000.0
21.5.1.321.5.2.321.5.3.3 (Oil leakage test)	7000.0
21.2(a) (Measurement of Winding Resistance)	1000.0
21.2(b) (Measurement of voltage ratio and,check ofvoltage vector relationship)	2000.0
7.9 & 8.9 (Measurement of Permissible flux density and over fluxing)	20000.0
21.4( c) (Measurement of No load current at 112.5 percent voltage)	2000.0
21.2(e) (Measurement of insulation resistance)	1500.0
21.2(c) (Measurement of impedance voltage (principal tapping), shortcurcuit impedance and load loss (At 50% and 100% load))	8000.0
21.2(d) (Measurement of no Load and loss and current)	6000.0
21.2(f) (lnduced Over Voltage withstand test)	4000.0
21.4(a) (Determination of sound levels)	7000.0
21.4( e) (BDV of Oil in the tranformer)	10000.0
21.5.1.121.5.2.121.5.3.1 (Air Pressure (Type test)-Deflection)	20000.0
21.3(a) (Impulse Voltage)	35000.0
21.3(a) (lmpulse Voltage)	65000.0
21.3(a) (lmpulse Voltage)	50000.0
21.3(a) (lmpulse Voltage)	40000.0
21.3(a) (lmpulse Voltage)	35000.0
21.3(a) (lmpulse Voltage)	65000.0
21.5.2.1 (Permanent Deflection)	20000.0
21.4( e) (Break Down Voltage)	10000.0
21.4(a) (Sound Levels)	7000.0
21.4(a) (Sound Levels)	6000.0
21.4(a) (Sound levels)	5000.0
21.4(a) (Sound Level)	5000.0
21.2(f) (lnduced Over Voltage withstand test)	4000.0
21.2(f) (lnduced Over Voltage withstand test)	3000.0
21.2(f) (lnduced Over Voltage withstand test)	2500.0
21.2(f) (lnduced Over Voltage withstand test)	1200.0
21.2(d) (No Load loss and current)	6000.0
21.2(d) (No Load loss and current)	6000.0
21.2(d) (No Load loss and current)	3000.0
21.2(c) (Load Loss and % Impedance)	8000.0
21.2(c) (Load Loss and % Impedance)	7000.0
21.2(c) (Load Loss and % Impedance)	6000.0
21.2(c) (Load Loss and % Impedance)	5000.0
21.2(c) (Load Loss and % Impedance)	3000.0
21.2(e) (Insulation Resistance)	1500.0
21.2(e) (Insulation Resistance)	1500.0
21.2(e) (insulation resistance)	1500.0
21.4( c) (No load current)	2000.0
8.9 (flux density and over fluxing)	20000.0
8.9 (flux density and over fluxing)	15000.0
7.9 (flux density and over fluxing)	10000.0
6.9 (flux density and over fluxing)	6500.0
21.2(b) (voltage ratio and voltage vector relationship)	2000.0
21.2(b) (voltage ratio and voltage vector relationship)	1500.0
21.2(b) (voltage ratio)	700.0
21.2(a) (Winding Resistance)	1000.0
21.2(a) (Winding Resistance)	700.0
21.5.3.3 (Oil leakage test)	5000.0
21.5.2.3 (Oil leakage test)	7000.0
21.5.1.3 (Oil Leakage Test)	7000.0
21.5.3.2 (Oil Leakage Test)	3500.0
21.5.2.2 (Oil Leakage Test)	5000.0
21.5.1.2 (Oil Leakage Test)	5000.0
21.2(g) (AC High Voltage Withstand Test)	2500.0
21.2(g) (AC High Voltage Withstand test)	1200.0
21.3(b) (Temperature Rise of Oil and Windings.)	40000.0
21.3(b) (Temperature Rise of the Oil and Windings.)	35000.0
21.3(b) (Temperature Rise of Oil and Windings.)	30000.0
21.3(b) (Temperatur Rise of Oil and Windings.)	15000.0
21.5.3.1 (Permanent Deflection)	6000.0
21.5.2.1 (Permanent Deflection)	15000.0
21.5.1.1 (Permanent Deflection)	10000.0
As per CBIP Pub No. 317 Cl. 3.17 (Magnetic Balance Test)	5000.0
As per CBIP Manual No. 317 Cl. (Harmonics of No-load Current)	15000.0
As per CBIP No. 317 Cl. 3.10 (Zero Sequence Impedance Measurement)	5000.0
As per CBIP No. 317 Cl. 3.10 (Magnetic Balance Test)	5000.0
N.A. (Unbalance Current)	5000.0
CBIP Publication no. 317 (Polarization Index)	2500.0

1112

National Test House (WR), Mumbai

Customized specification for Eyetex Dazller Eyeliner waterproof 1.1 g as per CSD Index no. 8451 - Customized specification for Eyetex Dazller Eyeliner waterproof 1.1 g as per CSD Index no. 8451

Customized specification for Eyetex Dazller Eyeliner waterproof 1.1 g as per CSD Index no. 8451

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Nomenclature of the item)	500.0
- (Dimensions with tolerance)	500.0
- (Weight with tolerance)	500.0
- (Colour)	500.0
- (Active ingredients)	4000.0
- (Identification Marks/Marking)	500.0
- (Capacity with tolerance)	500.0

1113

National Test House (WR), Mumbai

Customized Specification for Shore D hardness - Customized Specification for Shore D hardness

Customized Specification for Shore D hardness

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Hardness, Shore D as per ASTM D 2240)	1000.0

1114

National Test House (WR), Mumbai

Customized specification for Ponds magic freshness Talc 400g as per CSD Index no. 9471 - Customized specification for Ponds magic freshness Talc 400g as per CSD Index no. 9471

Customized specification for Ponds magic freshness Talc 400g as per CSD Index no. 9471

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Nomenclature of the item)	500.0
- (Dimensions with Tolerance)	500.0
- (Capacity with Tolerance)	500.0
- (Weight with tolerance)	500.0
- (Technical data with details of Active ingredients/IS 1462)	7000.0
- (Identification Mark/Marking)	500.0
- (Weight with tolerance)	500.0
- (Colour)	500.0

1115

National Test House (ER), Kolkata

IS 3502 (2009) - Steel chequered plates (Third Revision)

Steel chequered plates (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Tensile Strength)	1000.0
8 (Yield Stress)	1000.0
8 (Percentage Elongation)	1000.0
10 (Dimensions)	1000.0
0 (Mass of Zinc Coating)	2000.0
5 (Freedom From Defects)	1000.0
4 (Carbon)	500.0
4 (Manganese)	500.0
4 (Sulphur)	500.0
4 (Phosphorus)	500.0
4 (Silicon)	500.0
4 (Carbon Equivalent)	1500.0

1116

National Test House (WR), Mumbai

Customized specification for SET WET DEODORANT COOL AVATR REFREHING MINT 150 ML(Stella) - Customized specification for SET WET DEODORANT COOL AVATR REFREHING MINT 150 ML(Stella)as per CSD Index no. 8053

Customized specification for SET WET DEODORANT COOL AVATR REFREHING MINT 150 ML(Stella)as per CSD Index no. 8053

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Nomenclature of the item)	500.0
- (Dimensions with tolerances)	1000.0
- (Weight with tolerance)	500.0
- (Capacity with tolerance)	500.0
- (Colour)	500.0
- (Active ingredients)	3000.0
- (Identification Mark/marking)	500.0
- (Design)	500.0

1117

National Test House (WR), Mumbai

Customized specification for SET WET DEODORANT COOL AVATR REFREHING MINT 150 ML(PRIMACYO) - Customized specification for SET WET DEODORANT COOL AVATR REFREHING MINT 150 ML(PRIMACYO)as per CSD Index no. 8053

Customized specification for SET WET DEODORANT COOL AVATR REFREHING MINT 150 ML(PRIMACYO)as per CSD Index no. 8053

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Nomenclature of the item)	500.0
- (Dimensions with tolerances)	1000.0
- (Weight with tolerance)	500.0
- (Capacity with tolerances)	500.0
- (Colour)	500.0
- (Design)	500.0
- (Active ingredients)	3000.0
- (Identification Marks/Marking)	500.0

1118

National Test House (ER), Kolkata

NTH/ER/SL/Electrical/Inspection - Inspection

Inspection

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A1 (Inspection A1)	28500.0
A2 (Inspection-A2)	17000.0
A3 (Inspection-A3)	50000.0
A4 (Inspection-A4)	30000.0

1119

National Test House (WR), Mumbai

Custom Metal Powder (Nickel)_NTH(WR) - Purity and particle size of Nickel powder

Purity and particle size of Nickel powder

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- - (Nickel content, in %)	2000.0
- - (Particle size (by sieving method), retention in %.)	2000.0

1120

National Test House (NER), Guwahati

NTH/NER/Custom/2024/01- Fence Item (2024) - Custom Specification for Fence Item

Custom Specification for Fence Item

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Uniformity of coating- IS 2633:1986)	1000.0
2 (Mass of zinc coating, g/sq. m - IS 6745:1972)	2000.0
3 (Powder coating thickness, micron- IS 6012 : 1992)	1000.0

1121

National Test House (SR), Chennai

IS 650:1991 - Standard sand for testing cement

Standard sand for testing cement

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Colour)	500.0
4.1 (Silt (CPWD Specification -Vol I))	1000.0
4.1 (Shape (IS 383:2016))	1000.0
4.2 (Size-Sieve analysis -Particle size distribution)	2000.0
custom (Specific gravity-IS 2386(Part III))	500.0
Custom (Water absorption-IS 2386(Part III))	1000.0
5.1 (Organic Impurities)	1000.0
5.1 (The loss of mass -on extraction with hot HCl)	1200.0
custom (Chemical properties: CaO,SiO2,Al2O3,Fe2O3,Loss on Ignition(as per IS 4032))	4000.0
custom (Compressive strength (IS 4031/IS 456))	3000.0

1122

National Test House (NWR), Jaipur

IS 398 : Part 4 (1994) - Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Chemical composition)	5000.0
12.4 (Resistance test of Aluminium Alloy wire(7 wire construction))	1000.0
9.2(2) (Measurement of lay ratio - Outer layer(19 wire construction))	1000.0
1 ()	-

1123

National Test House (ER), Kolkata

IRC 105:2019 (DBM+BC)/(ASTM D 2041/AASHTO T 166/ASTM D2172/ASTM D 6307) - Specification for Dense Bituminous Macadam and Bituminous content for airfield Pavements

Specification for Dense Bituminous Macadam and Bituminous content for airfield Pavements

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3 (Bitumen content/Binder content of DBM core(ASTM D2172/ASTM 6307/IRC:SP:20-2002))	3000.0
2 (Density/Bulk density/Bulk specific gravity/Theoretical maximum specific gravity of BC core (Aashto T 166/ASTM D 2041))	3000.0
1 (Density/Bulk density/Bulk specific gravity/Theoretical maximum specific gravity of DBM core (Aashto T 166/ASTM D 2041))	3000.0
4 (Bitumen content/Binder content of BC core(ASTM D2172/ASTM 6307/(IRC-SP-20-2002))	3000.0

1124

National Test House (NR), Ghaziabad

IS 9968 : Part 1 (1984) - Elastomer Insulated Cables

Elastomer Insulated Cables

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Tests (i)Tensile test ( for aluminium),Wrapping test ( for aluminium),Conductor resist- ance test,Test for thickness of insulation and sheath and overall diameter,Physical tests for insulation and sheath ( as applicable ). a) Tensile strength and elongation at break b) Ageing In air oven,c) Hot set,Insulauon resistance, High voltage (water immersron ) test, Flammability test,Water absorption test.)	19500.0
Tests (i)Conductor resistance test,Test for thickness of insulation and sheath and overall diameter,Physical tests for insulation and sheath ( as applicable ). a) Tensile strength and elongation at break b) Ageing In air oven,c) Hot set,Insulauon resistance, High voltage (water immersron ) test, Flammability test,Water absorption test.)	17500.0

1125

National Test House (ER), Kolkata

CLW No.4TMS.096.029 Rev.1 (2009) - Specification for Non Adhesive Polyimide Film Tape

Specification for Non Adhesive Polyimide Film Tape

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2.0 (Thickness)	1000.0
2.0 (Mass per unit area)	1000.0
2.0 (Tensile Strength at 23 deg.C)	2000.0
2.0 (Elongation at rupture at 23 deg.C)	1000.0

1126

National Test House (ER), Kolkata

IS 10192 (1982) - Specification for synthetic resin bonded glass fibre (SRBGF) for electrical purposes

Specification for synthetic resin bonded glass fibre (SRBGF) for electrical purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Appearance)	500.0
4.2 (Flatness)	1000.0
4.3 (Length)	500.0
4.3 (Width)	500.0
4.3 (Thickness)	1000.0
4.4 (Water absorption)	1000.0
4.4 (Tensile strength)	2000.0
4.4 (Cross breaking strength)	2000.0
4.4 (Compressive strength)	2000.0
4.4 (Impact strength edgewise)	2000.0
4.4 (Splitting resistance)	2000.0

1127

National Test House (NWR), Jaipur

IS 398 Part 2 (2025) - ALUMINIUM CONDUCTORS FOR OVERHEAD TRANSMISSION PURPOSES

ALUMINIUM CONDUCTORS FOR OVERHEAD TRANSMISSION PURPOSES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1128

National Test House (NR), Ghaziabad

FAA Advisory Circular No. 150/5345-26E - FAA Specification For L-823 Plug & Receptacle Cable Connector

FAA Specification For L-823 Plug & Receptacle Cable Connector

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Section 3 (Visual Examination)	20000.0
4.2.2 (Di - electric Test)	60000.0
4.2.4 (Mechanical Connection Test)	10000.0
4.2.5 (Electrical Connection Test)	10000.0

1129

National Test House (NWR), Jaipur

Custom-1-NTH-LM - Fence Post Hollow Section and Fence Post Support Strip

Fence Post Hollow Section and Fence Post Support Strip

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Chemical composition)	5000.0
2 (Thickness)	500.0
10 (Salt Spray Test for 1440 Hours)	72000.0
7 (Mass of Zinc Coating)	1000.0
9 (Powder coating thickness)	1000.0
8 (Uniformity of coating)	500.0
6 (Percentage Elongation at 5.65 √area)	1000.0
5 (Yield Strength)	1000.0
4 (Tensile Strength)	1000.0
3 (Nominal Mass)	1000.0
1 (Diameter of Post)	1000.0
11 (Dimension of Fence Post Support Strip and anchor Rode)	2000.0
9.1 (Powder coating thickness)	1000.0

1130

National Test House (WR), Mumbai

Customized Specification for Books - Customized Specification for Books

Customized Specification for Books

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Colour of Printing)	500.0
- (Printing Content(visual))	500.0
- (Standards of paper (Cobb test))	2000.0
- (Standards of paper (Burst Index test))	1000.0
- (Standards of paper(Tear Index))	1000.0
- (Standards of Paper(Smoothness))	2000.0
- (Size of paper(in cm.))	500.0
- (Thickness of Paper in GSM)	1000.0
- (Binding)	500.0
- (Number of languages in Printing)	500.0
- (Language)	500.0
- (Single/Double sided)	500.0

1131

National Test House (SR), Chennai

CUSTOM/SR/CHEMICAL (2024) - Customized Specification for Chemical analysis

Customized Specification for Chemical analysis

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Custom (Test Results of Chemical composition (in Annexure))	5000.0
Custom (Test Results of Soil sample in Annexure (NON-NABL))	6000.0
C-1 (Toxic substances - Mercury (as Hg))	2000.0
C-2 (Toxic substances - Cadmium (as Cd))	1200.0
C-3 (Toxic substances - Lead (as Pb))	1200.0
C-4 (Volatile matter)	1200.0
C-5 (Mould Resistance)	2500.0
Custom (Test Results - Method: On the lines of IS 4032)	10000.0
Custom (Vitamin A Content)	1200.0
Custom 5.4.6 (Peel test for coal tar enamel - ANSI/AWWA C203-20 (2021))	5000.0
Custom (Chloride (acid soluble/water soluble) of mortar or concrete)	1200.0
Custom (Sulphate as SO3 (acid soluble/water soluble) of mortar or concrete)	1200.0

1132

National Test House (NWR), Jaipur

Custom-5-NTH-LM - Wire Mesh Panel

Wire Mesh Panel

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Width)	200.0
2 (Height)	200.0
5 (Tensile Strength of wire)	2000.0
10 (Diameter of Wire)	500.0
7 (Mass of Zinc Coating)	2000.0
10 (Diameter of Wire)	500.0
8 (Powder Coating Thickness)	2000.0
12 (Unit Weight)	500.0
9 (Salt Spray Test for 1000 Hours)	50000.0
19 (Uniformity of Coating)	500.0
14 (Wrapping Test for Ductility)	2000.0
16 (Carbon)	500.0
17 (Sulphur)	500.0
18 (Phosphorus)	500.0
18 (Sulphur + Phosphorus)	500.0
8 (Chemical composition)	5000.0
11 (Mesh Size (c/c))	300.0
9 (Salt Spray Test for 1440 hours)	60000.0
0 (Powder Coating Thickness Test)	2000.0
8 (Chemical composition)	5000.0
6 (Weld Shear Strength)	3000.0
2 (Adhesion test for coating)	2000.0
4 (Panel Weight)	500.0

1133

National Test House (ER), Kolkata

16361:2015 (RA 202O) (2015) - Thermoplastic Polymer based Coatings: (a) Undercoating (b)Finishing

Thermoplastic Polymer based Coatings: (a) Undercoating (b)Finishing

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Colour)	1200.0
3 (Viscosity (Brook field))	1500.0
2 (Consistency)	1200.0
4 (Drying Time, Hard Dry)	1200.0
5 (Dry film thickness)	1200.0
6 (Finish)	1200.0
7 (Mass per 10 litre)	1200.0
8 (Volume Solid (non volatile vehicle))	2000.0
9 (Flash point)	1200.0
10 (Resistance to heat)	1500.0
11 (Resistance to humidity)	1.0
12 (Resistance to neutral salt spray)	75000.0
13 (Resistance to water)	1200.0
14 (Resistance to acid)	1500.0
15 (Resistance to alkali)	1500.0
16 (Resistance to low temperature)	1000.0
17 (Moisture vapour permeability test)	5000.0
18 (Flexibility and adhesion test – Bend test)	1200.0
19 (Flexibility and adhesion test – Scratch hardness [Top coat (finishing)])	1200.0
20 (Fire retardant test)	5000.0
21 (a) Tensile test: Tensile strength b) Elongation at Break)	3000.0
23 (Durability test (QUV) [Top coat (finishing)])	25000.0

1134

National Test House (NR), Ghaziabad

IS 15909:2020 (2020) - PVC Geomembranes for Lining — Specification

PVC Geomembranes for Lining — Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table-2 (Category-B) (Results of Tests)	35000.0

1135

National Test House (SR), Chennai

IS 3951(2):2023 - Hollow clay tiles for floors and roofs-structural type

Hollow clay tiles for floors and roofs-structural type

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (General requirements)	1000.0
5 (Dimensions and Tolerances)	1000.0
6 (Bulk density)	1000.0
7 (Compressive strength)	2000.0
8 (Water absorption)	1000.0

1136

National Test House (SR), Chennai

IS 3951(1):2023 - Hollow Clay Tiles for Floors and Roofs — (Part 1) Filler Type

Hollow Clay Tiles for Floors and Roofs — (Part 1) Filler Type

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (General requirements)	1000.0
5 (Dimensions and Tolerances)	1000.0
6 (Bulk density)	1000.0
7 (Breaking strength)	2000.0
8 (Water absorption)	1000.0

1137

National Test House (ER), Kolkata

CUSTOM/POLYUTHERANE SPRING POST/2024 - POLYUTHERANE SPRING POST

POLYUTHERANE SPRING POST

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Material Identification)	4000.0
2.0 (Filler Content)	2000.0
3.0 (Density)	1000.0
4.0 (Melting Point)	1000.0
5.0 (Compressive Strength Horizontally)	2000.0
6.0 (Tensile Strength)	2000.0
7.0 (Elongation at Break)	1000.0
8.0 (UV Resistant (24 Hrs.))	1200.0

1138

National Test House (NWR), Jaipur

IS 6012-1992 - Measurement of coating thickness by Eddy current method

Measurement of coating thickness by Eddy current method

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Coating Thickness)	2000.0

1139

National Test House (ER), Kolkata

RDSO SPECIFICATION No. M&C/ PCN/ 100/ 2018 (2018) - FULL GLOSS POLYURETHANE ENAMEL (TWO PACK)

FULL GLOSS POLYURETHANE ENAMEL (TWO PACK)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Identification of polyisocyanates)	1200.0
2 (Drying time a) Surface dry b) Hard dry c) Hard dry at 70 Deg. C)	3600.0
3 (Consistency)	1200.0
4 (Finish)	1200.0
5 (Colour)	1200.0
6 (Dry film thickness)	1200.0
7 (Volume solids)	1200.0
8 (Scratch hardness (1.5 Kg Load))	1200.0
9 (Flexibility & Adhesion (6.25 mm mandrel))	1200.0
10 (Flash point (a) Component ‘A’ (b) Component ‘B’)	2400.0
11 (Fineness of Grind)	1200.0
12 (Pot life (After induction time) at a) 27±2°C b)40±2ºC)	1500.0
13 (Gloss at 60° angle of incidence)	1200.0
14 (Mass in Kg/10 litres)	1200.0
15 (Keeping properties)	5000.0
16 (Theoretical spreading rate)	2000.0
17 (% poly isocyanate by mass, in hardener)	3000.0
18 (Viscosity (Efflux time by Ford cup No.4) of paint i.e. mix. Of two components at 27± 2 °C in Supply condition)	1200.0
19 (Accelerated Tests (a) Resistance to 30% Sulphuric acid (weight by volume) (b) Resistance to 20% caustic potash (weight by volume) (c) Resistance to oil (d) Resistance to solvents (e) Resistance to water)	7200.0
20 (Durability Tests Accelerated weathering test)	37500.0
21 (Humidity Test (500 Hours))	9000.0
22 (Abrasion resistance-1000 Cycle)	5000.0

1140

National Test House (ER), Kolkata

RDSO Specification No. M&C/PCN/100/2018 - POLYURETHANE SURFACER (TWOPACK)

POLYURETHANE SURFACER (TWOPACK)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Drying time a) Surface dry b) Hard dry c) Hard dry at 70°C)	3600.0
2 (Consistency)	1200.0
3 (Finish)	1200.0
4 (Colour)	1200.0
5 (Dry film thickness)	1200.0
6 (Volume solids, %)	2000.0
7 (Scratch hardness (1.5Kg Load))	1200.0
8 (Flexibility & Adhesion (6.25 mm mandrel))	1200.0
9 (Flashpoint a) Component ‘A’ b) Component ‘B’)	2400.0
10 (Fineness of Grind)	1200.0
11 (Pot life (After induction time) i) 27±2°C ii) 40±2°C)	1500.0
12 (Mass in Kg/10 litres)	1200.0
13 (Keeping properties)	2000.0
14 (Theoretical spreading rate)	2000.0
15 (Viscosity (Efflux time by Ford cup No.4) of paint i.e. mix of two components at 27± 2 °C in Supply condition)	1200.0