NTH - Management Information System

Search by Standard No.

Reset

4236 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

991

National Test House (NWR), Jaipur

IS 4923 (2017) - Hollow steel sections for structural use - Specification (Third Revision)

Hollow steel sections for structural use - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (Sulphur, % by mass)	500.0
7.1 (Phosphorus, % by mass)	500.0
15.2 (Elongation, %)	1000.0
15.2 (Yield Strength, MPa)	1000.0
15.2 (Tensile Strength, MPa)	1000.0
9.1 (Dimension, mm)	1000.0
9.1 (Weight, kg/m)	1000.0
10.4 (Concavity and Convexity)	1000.0
7 (Chemical Composition % by mass)	1500.0

992

National Test House (NWR), Jaipur

NTH/WI/MC (on the lines of IS 4169:2014, RA 2020) 5 - Calibration of Hydraulic jack.

Calibration of Hydraulic jack.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Calibration of the hydraulic jack (20T))	12000.0

993

National Test House (NWR), Jaipur

Custom-20-ER-LM - Screw Jack/HYDRAULIC JACK

Screw Jack/HYDRAULIC JACK

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Load)	5000.0

994

National Test House (ER), Kolkata

IRS T-31 Fifth revision (2021) - Elastic Rail clip

Elastic Rail clip

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.3 (Chemical Composition, Percent by Mass)	2500.0
4.4 (Grain size analysis)	3000.0
4.5 (Inclusion rating)	4000.0
4.6 (Hardness Test)	2000.0
4.7 (Depth of Decarburisation)	2000.0
4.8 (Freedom from Defects)	1000.0

995

National Test House (ER), Kolkata

702: 2022 - Industrial Bitumen — Specification

Industrial Bitumen — Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Specific gravity at 27 Dg C)	1200.0
2 (Flash point, cleveland open cup)	1200.0
3 (Softening point)	1200.0
4 (Penetration at 25 dg C100g, 5 sec 1/10mm)	1200.0
7 (matter insoluble in Trichloroethylene)	1200.0

996

National Test House (ER), Kolkata

IS 164 : 2023 (2023) - Ready-Mixed Paint for Road Marking — Specification

Ready-Mixed Paint for Road Marking — Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table 1 (Drying time a) Surface dry (IS 101 (Part 3/sec 1)))	600.0
Table 1 (Drying time b) Hard dry (IS 101 (Part 3/Sec 1)))	600.0
Table 1 (Consistency)	600.0
Table 1 (Finish, (IS 101 (Part 3/Sec 4)))	600.0
Table 1 (Colour, (IS 101 (Part 4/Sec 2)))	600.0
Table 1 (Wet opacity, percent, (IS 101 (Part 4/Sec 1)))	600.0
Table 1 (Recoating property, Annexure E)	600.0
Table 1 (Resistance to bleeding, Annexure F)	600.0
Table 1 (Mass in kg/10 liter, (IS 101 (Part 1/Sec 7)))	600.0
Table 1 (Keeping properties (12 Months), (IS 101 (Part 6/Sec 2)))	5000.0
Table 1 (No pick up time (for type 2 only), Annexure H)	1000.0
Table 1 (Non Volatile matter , (IS 101 (Part 8/sec 2)))	600.0
Table 1 (Volume solid, (IS 101 (Part 8/sec 6)))	800.0
Table 1 (Taber Abrasion resistance, mg weight loss after 500 cycles using CS10 wheel with 500 g on each load (for type 2 only), Annexure J)	2000.0
Table 1 (Scrub resistance, Annexure K)	2000.0
Table 1 (Resistance to accelerated weathering 500 hours (for type 2 only), Annexure L)	30000.0
Table 1 (Flexibility (for type 2 only), (IS 101 (Part 5 /sec 2 )))	600.0
Table 1 (VOC, percent, (IS 101 (Part 2 /sec 4)))	2000.0
Table 1 (Resistance to wear, Annexure M)	3000.0
5.4 (Lead Restriction (IS 101 (Part 8/Sec 5), or by Atomic Absorption Spectrometer (AAS) or by ICP.))	1000.0

997

National Test House (WR), Mumbai

ILC for water storage tanks - ILC for water storage tanks

ILC for water storage tanks

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Tensile Strength)	-
- (Flexural Modulus)	-
- (Density)	-
- (Melt Flow Index)	-
- (Carbon Black Content)	-
- (Carbon Black Dispersion)	-
- (Thickness)	-

998

National Test House (NR), Ghaziabad

IS 16532 (2017) - APP Modified Bituminous Waterproofing and DampProofing Membrane with Polyester Reinforcement - Specification

APP Modified Bituminous Waterproofing and DampProofing Membrane with Polyester Reinforcement - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (Dimensions)	1000.0
5.2 (Weight (GSM))	1000.0
Table 4 (i) (Thickness of Membrane)	500.0
Table 4 (ii) (Cold Flexibility)	2000.0
Table 4 (iii) (Softening Point)	1500.0
Table 4 (iv) (Tensile Strength, Longitudinal)	1000.0
Table 4 (iv) (Tensile Strength, Transverse)	1000.0
Table 4 (v) (Elongation, Longitudinal)	500.0
Table 4 (v) (Elongation, Tarnsverse)	500.0
Table 4 (vi) (Tear Strength, Longitudinal)	1000.0
Table 4 (vi) (Tear Strength, Transverse)	1000.0
Table 4 (vii) (Heat Resistance)	1000.0
Table 4 (viii) (Penetration @25°C, 100g, 5s)	2000.0
Table 4 (ix) (Water Absorption)	1000.0
Table 4 (x) (Dimension stability, longitudinal/transverse)	1000.0
Table 4 (xi) (Pressure Head Test)	1000.0
4.1.1 (Type of Reinforcement)	1000.0

999

National Test House (ER), Kolkata

IS 1891 : Part 5 (1993) - Conveyor and elevator textile belting - Specification: Part 5 fire resistant belting for surface application

Conveyor and elevator textile belting - Specification: Part 5 fire resistant belting for surface application

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.0 (Construction)	1000.0
7.1 (Tensile Strength of Cover Rubber)	2000.0
7.1 (Elongation of Cover Rubber)	1000.0
7.2 (Tensile Strength of Cover Rubber after Ageing ( 72 hrs. at 70+/-1 deg. C))	3000.0
7.2 (Elongation of Cover Rubber after Ageing (72 hrs. at 70+/-1 deg. C))	2000.0
8.0 (Adhesion between Cover and Carcass)	2000.0
8.0 (Adhesion between Plies)	3000.0
Firm's request (Full Thickness Breaking Strength)	5000.0
Firm's request (Elongation at Ref. Load (Warp only))	1000.0
Firm's request (Full Thickness Elongation at Break)	1000.0
Firm's request (Flame Test)	4000.0
Firm's request (Hardness, Shore A)	1000.0
Firm's request (Hardness after Ageing (72 hrs. at 70+/-1 deg. C))	2000.0

1000

National Test House (ER), Kolkata

MMDTS 18034 REV-02 - Developmental Technical specification for PU Based Wet-On-Wet applicable Exterior Painting System for LHB Type Coaches.

Developmental Technical specification for PU Based Wet-On-Wet applicable Exterior Painting System for LHB Type Coaches.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (ANTI-GRAFFITI TEST,ASTM D-6578)	5000.0

1001

National Test House (ER), Kolkata

IS 15402 (2003) - Ceramic fibre blanket insulation - Specification

Ceramic fibre blanket insulation - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Bulk Density)	1000.0
5.5 (Tensile Strength)	2000.0
5.6 (Fiber Diameter)	2000.0
5.8 (Alumina content, as Al2O3,Percent)	1200.0
5.8 (Silica content, as SlO2, Percent)	1200.0
5.8 (Iron Oxide (as Fe2O3),Percent)	1200.0
5.9 (Thickness of Blanket Rolls)	1000.0
5.8 (Leachable Chlorides (Cl) percent)	1200.0

1002

National Test House (SR), Chennai

Textile NABL-2023-26 - Textile NABL-2023-26

Textile NABL-2023-26

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Footwear Flexing Endurance Test)	2000.0

1003

National Test House (SR), Chennai

Paper NABL-2023-26 - Paper NABL-2023-26

Paper NABL-2023-26

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Apparent Bulk Density)	1000.0
2 (Ash content at 525deg.C)	2000.0
3 (Ash content at 900deg.C)	2000.0
4 (Water Absorptiveness-Cobb test)	2000.0
5 (Mass of Coating for Carbon paper)	1000.0
6 (Moisture Content)	1000.0
7 (Smoothness Test)	2000.0
8 (Substance of base paper)	1000.0
9 (Substance (Grammage))	1000.0
10 (Tearing Resistance)	2000.0
11 (Tensile Index)	2000.0
12 (Thickness)	1000.0
13 (Stiffness Test)	2000.0

1004

National Test House (SR), Chennai

Plastics NABL-2023-26 - Plastics NABL-2023-26

Plastics NABL-2023-26

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Density)	1000.0
2 (Elongation)	1000.0
3 (Tensile Strength)	2000.0

1005

National Test House (ER), Kolkata

IS 14223 (Part 1):2023 - Polished Building Stones —Specification (Part 1-Granite and Similar Stones)

Polished Building Stones —Specification (Part 1-Granite and Similar Stones)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5,Table 1-(i) (Specific gravity ( as per IS 1124))	1000.0
5,Table-1(ii) (Water absorption (as per IS 1124))	1000.0
5,Table-1(iii) (Compressive strength, in N/mm2 (as per IS 1121 (Part 1)))	3000.0
5,Table-1(iv) (Tensile strength, in N/mm2 ( as per IS 1121 (Part 3)))	3000.0
5,Table-1(v) (Shear strength in N/mm2 (as per IS 1121 (Part 4)))	2000.0
5,Table-1(vi) (Hardness, in Mohs (as per IS 13630 (Part 13)))	2000.0
5,Table-1(vii) (Hardness (Schmidt) No -(as per IS 12608))	2000.0
5,Table-1(viii) (Hardness (shore) No -(as per IS 12608))	2000.0
5,Table-1(ix) (Ultrasonic pulse velocity-(as per IS 516 (Part 5/Sec 1)))	5000.0
5,Table-1(x) (Resistance to wear- a)Average b)Individual maximum, in mm (as per IS 1706))	4000.0
custom (Moisture content (%))	500.0
custom (Porosity)	1000.0
custom (Dry density)	1000.0
custom (Flexural strength)	3000.0

1006

National Test House (NER), Guwahati

IS 3757 (1985) - Specification for high strength structural bolts (Second Revision)

Specification for high strength structural bolts (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2 (Dimension (Length of bolt))	200.0
2 (Dimension (Shank Diameter))	200.0
2 (Dimension (Width across the flat))	400.0
2 (Dimension (Width across the edge))	400.0
2 (Dimension (Height of the head))	400.0
4 (Mechanical Properties(Tensile Strength) as per IS 1367(Part-3):2017 Clause No.- 7)	3000.0
4 (Mechanical Properties(Ultimate Tensile Load) as per IS 1367(Part-3):2017 Clause No.- 7)	2000.0
4 (Mechanical Properties(Proof Load Test) as per IS 1367(Part-3):2017 Clause No.- 7)	2000.0
4 (Mechanical Properties( Rockwell Hardness Scale- C) as per IS 1367(Part-3):2017 Clause No.- 7)	2000.0
0 (Wedge load test)	3000.0
4 (Carbon)	500.0
4 (Sulfur)	500.0
4 (Phosphorus)	500.0

1007

National Test House (NER), Guwahati

IS 6623 (2004) - High Strength Structural Nuts

High Strength Structural Nuts

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Mechanical Properties(Proof Load Test) as per IS 1367(Part-6) clause No.-7)	3000.0
5 (Mechanical Properties(Rockwell Hardness Scale-C) as per IS 1367(Part-6) clause-7)	2000.0
4 (Dimension(Height of head),m)	500.0
4 (Dimension(width across corner),e)	500.0
4 (Dimension(width across flats),s)	500.0

1008

National Test House (NER), Guwahati

IS 6649 (1985) - Specification for hardened and tempered washers for high strength structural bolts and nuts (First Revision)

Specification for hardened and tempered washers for high strength structural bolts and nuts (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Hardness Rockwell C/ Vickers)	2000.0
3 (Thickness, S)	500.0
3 (Chemical Composition as per IS 1570 Part-2.)	500.0
3 (Inner Diameter, (Φ d1))	500.0
3 (Outer Diameter, (Φ d2))	500.0

1009

National Test House (WR), Mumbai

IS:191 Clause 7.1 Table 4 - Copper-Specification

Copper-Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (4) (Copper)	2000.0

1010

National Test House (WR), Mumbai

IS 191 (2007) - Copper - Specification (Fourth Revision)

Copper - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1011

National Test House (ER), Kolkata

RDSO/PE/SPEC/AC/0183(Rev. 2)-2024 (2024) - Specification for 4.5 kW Underslung Constant Voltage, Regulated cum Emergency Battery Charger for LHB Coaches

Specification for 4.5 kW Underslung Constant Voltage, Regulated cum Emergency Battery Charger for LHB Coaches

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.11 (Dry Heat Test as per IEC:60571)	10000.0
10.11 (Damp Heat Test as per IEC:60571)	15000.0
10.12 (Salt Mist Test as per Class ST-1 of IEC:60571)	2500.0
10.19 (Burn-In Test as per RDSO specification no. ELRS/SPEC/SI/0015)	15000.0
10.20 (Low Temperature Storage Test as per IEC:60571 and IEC 60068-2-1)	10000.0

1012

National Test House (NR), Ghaziabad

IS 1180 : Part 1 (2014) - Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) ( 501kVA TO 1000 kVA ) [501kVA TO 1000 kVA]

Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) ( 501kVA TO 1000 kVA )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
21.3(b) (Temperature Rise Test)	35000.0
21.2(a) (Measurement of Winding Resistance)	1000.0
21.2(b) (Measurement of voltage ratio and, check of voltage vector relationship)	1500.0
21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test))	15000.0
21.5.1.221.5.2.221.5.3.2 (Pressure test (routine))	5000.0
21.4.(d) (Adhesion by Tape Test)	5000.0
21.5.1.321.5.2.321.5.3.3 (Oil leakage test)	7000.0
21.2(c) (Measurement of impedance voltage (principal tapping), short circuit impedance and load loss (At 50% and 100% load))	7000.0
7.9 & 8.9 (Measurement of Permissible flux density and over fluxing)	20000.0
21.4( c) (Measurement of No load current at 112.5 percent voltage)	2000.0
21.2(e) (Measurement of insulation resistance)	1500.0
21.2(d) (Measurement of no Load and loss and current)	6000.0
21.2(f) (lnduced Over Voltage withstand test)	3000.0
21.4(a) (Determination of sound levels)	6000.0
21.4( e) (BDV of Oil in the transformer)	10000.0
21.3(a) (Lightning Impulse Voltage Test)	50000.0
21.2(g) (AC High Voltage Withstand Test)	2500.0
As per CBIP Manual No. 317 Cl. (Harmonics of No-load Current)	12000.0
As per CBIP No. 317 Cl. 3.10 (Zero Sequence Impedance Measurement)	5000.0
As per CBIP No. 317 Cl. 3.10 (Magnetic Balance Test)	5000.0
N.A. (Unbalance Current)	5000.0
PGCIL Specification (Measurement of Capacitance & Tan Delta)	30000.0
Customer Requirement (Load Loss & % Impedance at Maximum Tap at rated current)	5000.0
Customer Requirement (Load Loss & % Imedance at Minimum Tap at rated current)	5000.0

1013

National Test House (NR), Ghaziabad

IS 1180 : Part 1 (2014) - Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) Three Phase ( 1 kVA to 200KVA ) [1kVA to 200KVA]

Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) Three Phase ( 1 kVA to 200KVA )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
21.3(b) (Temperature Rise Test)	24000.0
21.2(a) (Measurement of Winding Resistance)	1000.0
21.2(b) (Measurement of voltage ratio and, check of voltage vector relationship)	1500.0
21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test))	10000.0
21.5.1.221.5.2.221.5.3.2 (Pressure test (routine))	5000.0
21.4.(d) (Adhesion by Tape Test)	5000.0
21.5.1.321.5.2.321.5.3.3 (Oil leakage test)	7000.0
21.2(c) (Measurement of impedance voltage (principal tapping), short circuit impedance and load loss (At 50% and 100% load))	5000.0
7.9 & 8.9 (Measurement of Permissible flux density and over fluxing)	10000.0
21.4( c) (Measurement of No load current at 112.5 percent voltage)	2000.0
21.2(e) (Measurement of insulation resistance)	1000.0
21.2(d) (Measurement of no Load and loss and current)	5500.0
21.2(f) (lnduced Over Voltage withstand test)	2500.0
21.4(a) (Determination of sound levels)	5000.0
21.4( e) (BDV of Oil in the tranformer)	10000.0
21.3(a) (Lighting Impulse Voltage Test)	35000.0
21.2(g) (AC High Voltage Withstand Test)	2500.0
As per CBIP Pub No. 317 Cl. 3.17 (Magnetic Balance Test)	3000.0
As per CBIP Manual No. 317 Cl (Harmonics of No-load Current)	10000.0
As per CBIP No. 317 Cl. 3.10 (Zero Sequence Impedance Measurement)	3000.0
N.A. (Unbalance Current)	3000.0
Customer Requirement (Repeat of No-load Loss Measurement)	5000.0
Customer Requirement (Measurement of No-load Loss & Current at 90%, 100% & 110% of Rated Voltage)	5000.0
Customer Requirement (Measurement of Magnetization Current (No Load Current) at 415 V on LV Side)	2000.0

1014

National Test House (NR), Ghaziabad

IS 1180 : Part 1 (2014) - Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) Single Phase ( 1kVA to 100kVA ) [1kVA to 100kVA]

Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) Single Phase ( 1kVA to 100kVA )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
21.3(b) (Temperature Rise Test)	15000.0
21.2(a) (Measurement of Winding Resistance)	700.0
21.2(b) (Measurement of voltage ratio and, check of voltage vector relationship)	700.0
21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test))	6000.0
21.5.1.221.5.2.221.5.3.2 (Pressure test (routine))	3500.0
21.4.(d) (Adhesion by Tape Test)	5000.0
21.5.1.321.5.2.321.5.3.3 (Oil leakage test)	5000.0
21.2(c) (Measurement of impedance voltage (principal tapping), short circuit impedance and load loss (At 50% and 100% load))	3000.0
7.9 & 8.9 (Measurement of Permissible flux density and over fluxing)	6500.0
21.4( c) (Measurement of No load current at 112.5 percent voltage)	2000.0
21.2(e) (Measurement of insulation resistance)	700.0
21.2(d) (Measurement of no Load and loss and current)	3000.0
21.2(f) (lnduced Over Voltage withstand test)	1200.0
21.4(a) (Determination of sound levels)	5000.0
21.4( e) (BDV of Oil in the tranformer)	10000.0
21.3(a) (Lighting Impulse Voltage Test)	25000.0
21.2(g) (AC High Voltage Withstand Test)	1200.0
As per CBIP Pub No. 317 Cl. 3.17 (Magnetic Balance Test)	2000.0
As per CBIP Manual No. 317 Cl (Harmonics of No-load Current)	6000.0
As per CBIP No. 317 Cl. 3.10 (Zero Sequence Impedance Measurement)	2000.0
N.A. (Unbalance Current)	2000.0

1015

National Test House (WR), Mumbai

Custom specification NTH WR for General surface coating material - Custom specification NTH WR for General surface coating materials

Custom specification NTH WR for General surface coating materials

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Galvanizing (Mass of Zinc Coating))	1500.0
- (Uniformity of Coating)	1500.0
- (Purity of Copper)	2000.0

1016

National Test House (ER), Kolkata

RDSO/2018/GE: IRS-0004-Part-I (2019) - Non-woven Geotextile to be used as separator/filtration in Railway formation

Non-woven Geotextile to be used as separator/filtration in Railway formation

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Annexure - 1 (Material/Polymer)	5000.0
Annexure-1 (Trapezoidal Tear Strength)	2000.0

1017

National Test House (NR), Ghaziabad

IS 1180 : Part 1 (2014) - Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) ( 201kVA TO 500kVA ) [201kVA TO 500kVA]

Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) ( 201kVA TO 500kVA )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
21.3(b) (Temperature Rise Test)	30000.0
21.2(a) (Measurement of Winding Resistance)	1000.0
21.2(b) (Measurement of voltage ratio and, check of voltage vector relationship)	1500.0
21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test))	15000.0
21.5.1.221.5.2.221.5.3.2 (Pressure test (routine))	5000.0
21.4.(d) (Adhesion by Tape Test)	5000.0
21.5.1.321.5.2.321.5.3.3 (Oil leakage test)	7000.0
21.2(c) (Measurement of impedance voltage (principal tapping), short circuit impedance and load loss (At 50% and 100% load))	6000.0
7.9 & 8.9 (Measurement of Permissible flux density and over fluxing)	15000.0
21.4( c) (Measurement of No load current at 112.5 percent voltage)	2000.0
21.2(e) (Measurement of insulation resistance)	1000.0
21.2(d) (Measurement of no Load and loss and current)	5500.0
21.2(f) (lnduced Over Voltage withstand test)	2500.0
21.4(a) (Determination of sound levels)	6000.0
21.4( e) (BDV of Oil in the tranformer)	10000.0
21.3(a) (Lightning Impulse Voltage Test)	40000.0
21.2(g) (AC High Voltage Withstand Test)	2500.0
As per CBIP Manual No. 317 Cl (Harmonics of No-load Current)	12000.0
As per CBIP No. 317 Cl. 3.10 (Zero Sequence Impedance Measurement)	4000.0
As per CBIP No. 317 Cl. 3.10 (Magnetic Balance Test)	4000.0
N.A. (Unbalance Current)	4000.0

1018

National Test House (ER), Kolkata

IRS T-44 (2023) - GLASS FILLED NYLON-66 INSULATING LINERS

GLASS FILLED NYLON-66 INSULATING LINERS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table-1A (Specific Gravity)	1000.0
Table-1A (Glass Filler)	2000.0
Table-1A (Tensile Strength)	1500.0
Table-1A (Elongation at break)	1500.0
Table-1A (Cross Breaking Strength)	3000.0
Table-1A (Dielectric Strength)	10000.0
Table-1A (Volume Resistivity)	10000.0
Table 1A (Melting Point)	1000.0

1019

National Test House (ER), Kolkata

IRS T-55 (2023) - RAIL PADS FOR PLACING BENEATH RAILS

RAIL PADS FOR PLACING BENEATH RAILS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.5 (Hardness, Shore'A')	1000.0
4.5 (Tensile Strength before ageing)	1500.0
4.5 (Tensile Strength after ageing at 100 +/-1 deg C for 72+0/-2 hrs)	1500.0
4.5 (Retention after ageing)	1000.0
4.5 (Elongation at break before ageing)	1500.0
4.5 (Elongation at break after ageing at 100 +/-1 deg C for 72+0/-2 hrs)	1500.0
4.5 (Retention after ageing)	1000.0
4.5 (Relaxed Modulus at 100% Elongation, before ageing)	1000.0
4.5 (Relaxed Modulus at 100% Elongation, Change after Ageing at 100+/-1 deg C for 72+0/-2 hrs)	1000.0
4.5 (Ash Content)	2000.0
4.5 (Specific Gravity)	1000.0
4.5 (Weight Test)	1000.0
4.5 (Compression Set Subjected to 50% Compression at 100+/-1 deg C for 24+0/-2 hrs)	3000.0
4.5 (Tension set subjected to 50% Stretch at 100+/-1 deg C for 24+0/-2 hrs)	3000.0
4.5 (Electrical Resistance (Before Immersion))	5000.0
4.5 (Electrical Resistance (After Immersion))	5000.0

1020

National Test House (NR), Ghaziabad

IS:3400 PT-22 1984 - METHODS OF TEST FOR VULCANIZED RUBBER Sulphur content only

METHODS OF TEST FOR VULCANIZED RUBBER Sulphur content only

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl 4 .A-3 (TOTAL SULPHUR CONTENT % by mass)	7000.0