NTH - Management Information System

Search by Standard No.

Reset

4391 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

751

National Test House (SR), Chennai

Custom/SR/Precious Metals (2025) - Custom Standard for Precious Metals

Custom Standard for Precious Metals

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Custom 1 (Silver content - IS 2113:2014)	2000.0
Custom 2 (Dimension)	2000.0

752

National Test House (NWR), Jaipur

IS 14490 (2024) - Plain Copier Paper — Specification

Plain Copier Paper — Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Moisture Content)	1000.0
5.3 (Grammage (Substance))	1000.0
5.4 (Thickness)	1000.0
Table 1(i) (Brightness (ISO))	2000.0
Table 1(ii) (Opacity)	2000.0
Table 1(iii) (One minute cobb test)	2000.0
Table 1(iv) (Wax Pick (Surface Strength))	2000.0
Table 1(v) (Smoothness (Bendsten))	1000.0
Table 1(vii-a) (Taber Stiffness, MD)	500.0
Table 1(vii-b) (Taber Stiffness, CD)	500.0
Table 1(viii-a) (Tear Index, MD)	1000.0
Table 1(viii-b) (Tear Index, CD)	1000.0
Table 1(ix-a) (Tensile Index, MD)	1000.0
Table 1(ix-b) (Tensile Index, CD)	1000.0
Table-1(vi) (Ash Content (at 900°C))	2000.0
5.5 (Size)	500.0
As per specification (Test Results)	14000.0
5.1 (General)	500.0

753

National Test House (NR), Ghaziabad

IS 11647 (1986) - Specification for braille paper

Specification for braille paper

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table 2 (Size)	1000.0
Table 2 (Substance, GSM)	1000.0
Table 1(i) (Burst Factor)	2000.0
Table 1(ii) (Tear Factor)	2000.0
Table 1(iii) (Folding Endurance)	2000.0
Table 1(iv) (Stiffness)	2000.0
Firm's Requirement (Smoothness (Bendstan))	2000.0

754

National Test House (ER), Alipore

MMDTS 19041 Rev.03 - Technical Specification for Bio Degradable , Oleophobic & Hydrophobic Organic Surface Coating on Interior Surface

Technical Specification for Bio Degradable , Oleophobic & Hydrophobic Organic Surface Coating on Interior Surface

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Drying time at 25±2°C (i) Surface dry, (ii) Curing time)	2400.0
2 (Consistency)	1200.0
3 (Finish)	1200.0
4 (Colour)	1200.0
5 (Dry film thickness per coat)	1200.0
6 (Scratch hardness (at 1.5 Kg. load))	1200.0
7 (Flexibility & Adhesion (6.25 mm mandrel))	1200.0
8 (Flash Point)	1200.0
9 (Resistance to Salt Spray (3000hrs))	150000.0
10 (Protection against corrosion under condensation (2500 hrs))	45000.0
11 (Spreading & Covering surface area Capacity)	1200.0
12 (Resistance to chemicals On, 25% caustic soda solution (w/v))	1500.0
13 (Resistance to chemicals On, 30% Sulphuric Acid (v/v))	1500.0
14 (Mass in kg/10 litres,)	1200.0
15 (Impact Resistance test)	1500.0
16 (Resistance to distilled Water (3000hrs))	5000.0
17 (Abrasion Resistance test)	5000.0
18 (Gloss at 60° angle of incidence)	1200.0
19 (Anti-Graffiti Properties)	5000.0
20 (Durability – Accelerated Weathering QUV 4 hours and 4hours Condensation alternatively, (750 hrs). Temp. 50°С as per ASTM G154- (latest version))	37500.0

755

National Test House (SR), Chennai

IS 9537(Part-I)-1980 & (Part-3)-1983 - SPECIFICATION FOR CONDUITS FOR ELECTRICAL INSTALLATIONS

SPECIFICATION FOR CONDUITS FOR ELECTRICAL INSTALLATIONS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

756

National Test House (NWR), Jaipur

Custom_4984-2016_PHED_Rajasthan (2016) - Custom_4984-2016_PHED_PE Pipe for water supply

Custom_4984-2016_PHED_PE Pipe for water supply

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.2 (Colour_IS:4984)	100.0
6.2.1 (Colour of Strip_IS:4984)	100.0
6.2.1 (Depth of Strip_IS:4984)	100.0
6.2.1 (Width of Strip_IS:4984)	100.0
7.1 (Visual Appearance_IS:4984)	100.0
7.4 (Wall Thickness_IS:4984)	500.0
7.4.1 (Outside Diameter_IS:4984)	100.0
7.4.1.2 (Ovality_IS:4984)	100.0
8.1 (Acceptance test_IS:4984:Annex-E)	5000.0
8.2 (Reversion Test_IS:4984)	1000.0
8.3 (Carbon Black Content_IS:2530)	1000.0
8.4 (MFR_IS:2530)	1800.0
8.5 (OIT_IS:4984_Annex-B)	2000.0
8.3 (CBD_IS:2530)	1000.0
8.7 (Density_IS:7328)	2000.0
8.9 (IS:4984_Annex-H_Tensile Strength)	1000.0
8.9 (IS:4984_Annex-H_Elongation at Break)	1000.0
8.6 (IS:9845_Overall Migration)	1000.0

757

National Test House (NWR), Jaipur

FCO -The Fertiliser (Control) Order 1985 (as amended up-to Oct 2024) (1985) - FCO

FCO

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Test Result (1 to 3 Parameter) (As per Annexure/Form L)	2000.0
Test Result (4 to 6 Parameter) (As per Annexure/Form L)	4000.0
Test Result (more than 6 Parameter) (As per Annexure / Form L)	7000.0
Part A (Non-NABL) (FCO 1985)	2000.0
Part A (Non-NABL) Parameter 4 to 6 (FCO 1985)	4000.0
Part A (Non-NABL ) More than 6 (FCO 1985)	7000.0

758

National Test House (NWR), Jaipur

IS 10500 Drinking Water (2012) - Customised specification of potability parameters for Drinking Water as per IS 10500 [-]

Customised specification of potability parameters for Drinking Water as per IS 10500

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1. (Colour)	500.0
2. (Odour)	200.0
3. (pH)	200.0
4. (Taste)	200.0
5. (Turbidity)	500.0
6. (TDS (Total Dissolved Solids))	500.0
7. (Fluoride)	500.0
8. (Nitrate)	500.0
9. (Total Hardness)	500.0
10. (E.Coli)	500.0
11. (Calcium)	500.0
12. (Magnesium)	500.0
13. (Sulphate)	500.0
14. (Chloride)	500.0
15. (Alkalinity)	500.0
16. (Total Coliform)	500.0
Clause 4 (Customer Specification for Potability Parameter as per IS 10500)	5000.0

759

National Test House (NWR), Jaipur

IS 9845 (1998) - Determination of Overall Migration of Constituents of Plastics Materials and Articles Intended to Come in Contact with Foodstuffs/ Polymer identification for food grade plastic [-]

Determination of Overall Migration of Constituents of Plastics Materials and Articles Intended to Come in Contact with Foodstuffs/ Polymer identification for food grade plastic

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.0 (DETERMINATION OF OVERALL MIGRATION)	3000.0

760

National Test House (ER), Alipore

EIL Specification for High Build Coating System - EIL Specification for High Build Coating System

EIL Specification for High Build Coating System

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Cyclic Test Salt Spray : 72 hrs. Drying in air: 16 hrs. UV-A340 nm weather meter: 80 hrs. One cycle: 168 hrs. (25 cycles at 168 hrs. each cycle) (ASTM D5894))	142000.0
2 (100% Humidity Test (ASTM D2247))	33000.0
3 (Thermal Shock Resistance Test: 5 cycles @ 30 minutes in furnace at 120 deg C and 15 minutes in water after quenching in water for each cycle.(ASTM D2485 method A))	5000.0
4 (Chemical resistance Test ASTM D 543 10 % NaOH &40 % NaOH for 1000 hrs.)	4000.0
5 (Chemical resistance Test ASTM D 543,5 %f H2SO4 for 168 hrs.)	1500.0
6 (Chemical resistance Test ASTM D 543,Acetone for 4 weeks,)	1500.0
7 (Chemical resistance Test , ASTM D 543 Xylene for 4 weeks)	1500.0
8 (Chemical resistance Test, ASTM D 543 Ethanol for 4 weeks)	1500.0
9 (Chemical resistance Test ASTM D 543,Kerosene for 4 weeks)	1500.0
10 (Chemical resistance Test, ASTM D 543 Sea Water 2000 hrs.)	4000.0
11 (Immersion in DM/DI water @90deg.C (ASTM C868) for 30 days)	5000.0
12 (Cathodic Disbondment Test at 60 deg.C (ASTM G8))	5000.0
13 (Resistance to DM water using water immersion for 2000 hrs. ASTM D 870)	2000.0
14 (Assessment of adhesion & Artificial Ageing as per ISO 19277)	45600.0

761

National Test House (WR), Mumbai

Laminating Film - Laminating Film

Laminating Film

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Tear Strength)	2000.0

762

National Test House (ER), Kolkata

4574 (1989) - Fluorspar for use in metallurgical Industries

Fluorspar for use in metallurgical Industries

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Calcium Fluoride)	1000.0
1 (Silica)	1000.0
1 (Mixed Oxides)	1000.0
1 (Sulphur)	1000.0
1 (Lead)	1000.0

763

National Test House (NR), Ghaziabad

Custom spec Mint - Custom spec Mint

Custom spec Mint

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Copper %)	1200.0
2 (Zinc %)	1200.0
3 (Nickel %)	1100.0

764

National Test House (NR), Ghaziabad

Custom/NR/Bitumen/BC/BM - Bitumen/Binder Content

Bitumen/Binder Content

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Bitumen/Binder Content)	3000.0

765

National Test House (ER), Alipore

M&C/PCN/132/2021 - RDSO Specification for Painting of Helical Coils Springs of LHB Coaches and similar application (single pack)

RDSO Specification for Painting of Helical Coils Springs of LHB Coaches and similar application (single pack)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Drying Time (Hard Dry))	1200.0
2 (Consistency)	1200.0
3 (Finish)	1200.0
4 (Colour)	1200.0
5 ((a) Dry Film thickness,(b) Cumulative DFT)	2400.0
6 (Volume solids %)	2000.0
7 (Scratch Hardness (at 1.5 kg load))	1200.0
8 (Flexibility and Adhesion ( 6.25 mm Mandrel))	1200.0
9 (Flash Point)	1200.0
10 (Resistance to Salt Spray 2000hrs.)	100000.0
11 (Protection against Corrosion under condition of condensation 2000hrs.)	36000.0
12 (Keeping properties (after 12 months))	5000.0
13 (Covering Capacity per coat)	1200.0
14.(a) (Resistance to chemical (25% NaOH, w/v))	1500.0
14.(b) (Resistance to chemical (30% H2SO4, v/v))	1500.0
14.(c) (Resistance to chemical (20% HCL, v/v))	1500.0
14.(d) (Resistance to chemical (Lubricating oil))	1500.0
14. e. (i) (Resistance to solvent (Acetone))	1500.0
14. e. (ii) (Resistance to solvent (Xylene))	1500.0
14.e.(iii) (Resistance to solvent (Ethanol))	1500.0
14.(f) (Resistance to Raw water/ Tape water)	1200.0
15 (Mass in kg/10 litres.)	1200.0
16 (Impact Resistance Test)	1500.0
17 (Fineness of Grind)	1200.0
18 (Adhesion Test (Cross cut ))	1500.0
19 (Disel Resistance Test)	1200.0
20 (Abrasion Resistance Test of System)	5000.0
21 (Pull of Adhesion)	5000.0
22 (Cathodic Disbondment Test)	5000.0
23 (Viscosity by Ford Cup no.4)	1200.0
24 (Accelerated Weathering Test (QUV 500hrs))	25000.0

766

National Test House (NWR), Jaipur

NTH/NR/XR/PUF Insulation (2023) - Polyurethane Insulation Block

Polyurethane Insulation Block

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's Requirement (Dimensions)	1000.0
Firm's Requirement (Density)	1000.0

767

National Test House (WR), Mumbai

Pre applied HDPE 90 - Pre applied HDPE 90 [-]

Pre applied HDPE 90

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Thickness(Composite))	1000.0
- (Thickness bare HDPE)	1000.0
- (Tensile Strength(L))	1500.0
- (Tensile Strength(T))	1500.0
- (Elongation(L))	1500.0
- (Elongation(T))	1500.0
- (Static Puncture Resistance)	2000.0
- (Resistance to Hydrostatic Pressure)	5000.0
- (Cold Temperature Flexibility)	2000.0
- (Water absorption)	2000.0
- (Water vapour Transmission)	5000.0
- (Lap Peel Adhesion)	2000.0
- (Peel Adhesion to Concrete)	2000.0

768

National Test House (NWR), Jaipur

IS 12436:1988 - Specification for Preformed Rigid Polyurethane (PUR) and Polyisocyanurate(PIR) foams for thermal insulation

Specification for Preformed Rigid Polyurethane (PUR) and Polyisocyanurate(PIR) foams for thermal insulation

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A-2 (Density(as per IS 7888:1976):)	1000.0

769

National Test House (WR), Mumbai

IRS T-44-2023 - IRS T-44-2023

IRS T-44-2023

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Specific Gravity)	1000.0
- (Ash Contents)	2000.0
- (Volume Resistivity)	3000.0
- (Dielectric Strength)	3000.0
- (Glass Filler Content)	2000.0

770

National Test House (WR), Mumbai

DWC Pipe - DWC Pipe

DWC Pipe

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Visual)	500.0
- (Dimensions(OD and ID))	1000.0
- (Compression test)	2000.0
- (Marking at the interval of 1 to 3 meters)	1000.0

771

National Test House (WR), Mumbai

APP membranes - APP membranes

APP membranes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Thickness)	1000.0
- (Unit weight)	1000.0
- (Tensile Strength(L))	1500.0
- (Tensile Strength(T))	1500.0
- (Elongation(L))	1500.0
- (Elongation(T))	1500.0
- (Tear Strength(L))	1500.0
- (Tear Strength(T))	1500.0
- (Static Puncture resistance)	1000.0
- (Low temperature flexibility)	2000.0
- (Heat resistance @120 deg.C)	2000.0
- (Water absorption)	2000.0
- (Penetration at 25 deg. C)	1500.0
- (Softening Point)	1500.0
- (Dimensional Stability(L))	1500.0
- (Dimensional Stability(T))	1500.0
- (Joint Strength)	3000.0

772

National Test House (WR), Mumbai

IS 7310 : Part 1 (2019) - Qualification Testing of Welders-Fusion Welding Part 1 Steels (First Revision)

Qualification Testing of Welders-Fusion Welding Part 1 Steels (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.2.1a) (Magnetic Particle Testing)	1000.0
6.4 (Ultrasonic Testing)	1000.0
6.4 (Radiographic Testing on Plate)	1000.0
6.4 (Visual Testing)	1000.0
6.4 (Radiographic Testing on Pipe)	3000.0

773

National Test House (WR), Mumbai

ASME ASME (2021) - Performance test ( Plate & electrodes not supplied by NTH)

Performance test ( Plate & electrodes not supplied by NTH)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ASME (Welder qualification)	5000.0

774

National Test House (WR), Mumbai

ASME ASME Section IX (2021) - Preparation of welding procedure specification (WPS) as per ASME Section IX

Preparation of welding procedure specification (WPS) as per ASME Section IX

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ASME Section IX (Welding procedure Specification)	10000.0

775

National Test House (SR), Chennai

IS 383:2016 - COARSE AND FINE AGGREGATE FOR CONCRETE-SPECIFICATION (All tests for the fine aggregates as per IS 2386)

COARSE AND FINE AGGREGATE FOR CONCRETE-SPECIFICATION (All tests for the fine aggregates as per IS 2386)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2.1,Table 2 (Deleterious materials & Organic impurities)	1000.0
5.6 (Alkali aggregate reaction)	1000.0
5.7 (Total alkali content Na2O equivalent, percent)	500.0
5.7 (Total Sulphate content as SO3,percent)	500.0
5.7 (Water soluble Chloride content, Percent)	500.0
6 (Size and grading of aggregates-Sieve analysis)	2000.0
5.7 (Specific gravity)	500.0
5.7 (Water absorption)	1000.0
7.2 (Bulk density-Loose)	500.0
7.2 (Bulk density-Compacted)	500.0
7.2 (Silt content (CPWD Specification))	1000.0
7.2 (Bulking of Sand)	1000.0
7.2 (Micro fines content)	1000.0
5.5 (Soundness)	1000.0
custom (Moisture content(%))	1000.0
custom (Water absorption % (ASTM C 128 – 07a))	2000.0

776

National Test House (ER), Kolkata

on the lines of IS 2547(1)/IS 2250/IS 15477/Customer technical specification - on the lines of Gypsum plaster /Masonry Mortars/Jointing Mortar

on the lines of Gypsum plaster /Masonry Mortars/Jointing Mortar

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
custom (Chloride Content)	1200.0
custom (Bulk density -on the lines of IS 2386 (Part 3))	2000.0
custom (Drying shrinkage (on the lines of Is 1727))	2000.0
custom (Compressive strength ( duration 3,7, 28 days))	4000.0

777

National Test House (ER), Kolkata

IS 2547 : Part 2 (1976) - Specification for gypsum building plasters: Part 2 premixed lightweight plasters

Specification for gypsum building plasters: Part 2 premixed lightweight plasters

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Compressive Strength )	1000.0
4.1 (Dry set density)	500.0
4.1 (Dry bulk density)	500.0
4.1 (Mechanical Resistance)	500.0
4.1 (Sum of Sodium and Magnesium salt contents expressed as percentage of Sodium oxide (Na2O) & Magnesium of Oxide (MgO)by mass)	3000.0
custom (Degree of whiteness(IS 8042:2015))	1500.0
custom (Setting time (IS 2542))	500.0

778

National Test House (ER), Kolkata

IS 2547 : Part 1 (1976) - Specification for gypsum building plaster: Part 1 excluding premixed lightweight plasters

Specification for gypsum building plaster: Part 1 excluding premixed lightweight plasters

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Soundness)	500.0
5.2 (Transverse Strength)	1000.0
5.2 (Setting Time)	500.0
5.2 (Expansion on setting)	500.0
5.2 (Residue on sieving)	500.0
5.2 (Civil Resistance)	500.0
Table 1 Clause 4.1 (Loss of Ignition , percent by mass)	1000.0
Table 1 Clause 4.1 (Free Lime , Percent by mass)	1000.0
Table 1 Clause 4.1 (Sodium Soluble Salts, expressed as percentage of Na2O)	1000.0
Table 1 Clause 4.1 (Soluble Magnesium salts, expressed as percentage of MgO)	1500.0
Table 1 Clause 4.1 (CaO, Percent by mass)	1500.0
Table 1 Clause 4.1 (SO3, Percent by mass)	1000.0
5.2 (Mechanical resistance of set neat plaster)	500.0

779

National Test House (ER), Kolkata

IS 9845 (1998) - Determination of Overall Migration of Constituents of Plastics Materials and Articles Intended to Come in Contact with Foodstuffs/ Polymer identification for food grade plastic [-]

Determination of Overall Migration of Constituents of Plastics Materials and Articles Intended to Come in Contact with Foodstuffs/ Polymer identification for food grade plastic

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Amount of extractive)	3000.0

780

National Test House (SR), Chennai

NTH/NR/RPPT/Polycarbonate Sheet - Customized specification for Polycarbonate Sheet

Customized specification for Polycarbonate Sheet

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's Requirement (Thickness)	1000.0