| 781 |
National Test House (ER), Alipore
| IS 2339 (2013) - Aluminium paints for general purposes - Specification (First Revision) |
Aluminium paints for general purposes - Specification (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.3 ix (Keeping properties) |
5000.0 |
|
| 5.3viii (Flash point) |
2000.0 |
|
| 5.3 vii (Resistance to humidity under condition of condensation) |
3000.0 |
|
| 5.3 vi (Flexibility and adhesion, bend test usingType 1 apparatus and 6.25 mm dia Mandrel) |
200.0 |
|
| 5.3 v (Wet Opacity) |
500.0 |
|
| 5.3 iv (Mass) |
200.0 |
|
| 5.3 iii (Finish) |
200.0 |
|
| 5.3 ii (Consistency) |
200.0 |
|
| 5.3 i (Drying Time Hard dry) |
200.0 |
|
| 5.2 (Lead Resistrction) |
500.0 |
|
| 5.1.1 (Leafing Value) |
1500.0 |
|
| 5.1 (Compostion) |
200.0 |
|
| 5.2 (Lead Restriction) |
500.0 |
|
| Table 1 Cl 3 (Form & Condition) |
1000.0 |
|
| Table 1 Cl 3 (Grease content) |
1500.0 |
|
| Table 1 Cl 3 (Residue on Sieve) |
1000.0 |
|
| Table 1 Cl 3 (Volatile matters) |
500.0 |
|
| Table 1 Cl 3 (Acid Value) |
500.0 |
|
|
| 782 |
National Test House (ER), Alipore
| Customized Specification for Paint Coatings NTH ER 2024 (-) - Customized Specification for Paint Coatings NTH ER 2024 |
Customized Specification for Paint Coatings NTH ER 2024 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (PULL OF ADHESION ,MPa
ASTM D4541) |
5000.0 |
|
| 2 (HUMIDITY RESISTANCE FOR 3000 hrs) |
90000.0 |
|
| 3 (HUMIDITY RESISTANCE FOR 1000 hrs
ASTM D4585) |
50000.0 |
|
| 4 (SALT SPRAY TEST FOR 2000 hrs
ASTM B 117) |
100000.0 |
|
| 5 (UV RESISTANCE FOR 1000 hrs
(ASTM G 154) |
50000.0 |
|
| 6 (SALT SPRAY TEST FOR 5000 hrs
ASTM B 117) |
250000.0 |
|
| 7 (TENSILE STRENGTH, MPa
ASTM D 638) |
2000.0 |
|
| 8 (ELONGATION %
ASTM D 638) |
1000.0 |
|
| 9 (WATER IMMERSION TEST for 14 days) |
5000.0 |
|
| 11 (SALT SPRAY TEST FOR 2500 hrs ASTM B 117) |
125000.0 |
|
| 10 (UV RESISTANCE FOR 500 hrs (ASTM G 154) |
25000.0 |
|
| 12 (SALT SPRAY TEST FOR 1000 hrs ASTM B 117) |
50000.0 |
|
| 13 (Dry film Thickness(DFT),in microns) |
1200.0 |
|
| 15 (Scratch hardness (at the load of 1000gm)
IS: 101 (part 5 / Sec 1) 1988
(Reaffirmed 2019)) |
1200.0 |
|
| 16 (Adhesion of film
ASTM 3359
(Circular Blade cross cut)
/IS:101.5.2.1988) |
2000.0 |
|
| 17 (Finish
IS:101 (Part 3/ sec 4) 1987
(Reaffirmed 2019)) |
1000.0 |
|
| 18 (Accelerated Weathering QUV test for 1000 hours (ASTM D 4587)
(Gloss Loss, Colour Change)) |
50000.0 |
|
| 19 (Resistance to petrol benzol mixture
(To pass 500g scratch hardness after the exposure)
jSS-8010-82:2012, Appendix - D) |
2000.0 |
|
| 36 (Abrasion Resistance (ASTM D 4060)
1000g load/CS 17/1000 Cycle) |
4000.0 |
|
| 33 (Outdoor Durability Test 25 days
JSS-8010-82 2012.Annex G) |
20000.0 |
|
| 52 (SALT SPRAY TEST FOR 500 hrs ASTM B 117) |
25000.0 |
|
| 2 (HUMIDITY RESISTANCE FOR 3000 hrs) |
90000.0 |
|
| 53 (Volume solid) |
2000.0 |
|
| 54 (Specific Gravity (Base)) |
1200.0 |
|
| 55 (Specific Gravity (Catalyst)) |
1200.0 |
|
| 56 (Specific Gravity (Mixed)) |
1200.0 |
|
| 57 (Pencil Hardness) |
1500.0 |
|
| 58 (Salt Spray Resistance (3000 hours)) |
150000.0 |
|
| 59 (Non Volatile matter (Base)) |
1200.0 |
|
| 60 (Non Volatile matter (Catalyst)) |
1200.0 |
|
| 61 (Non Volatile matter (Mixed)) |
1200.0 |
|
| 62 (Drying Time) |
1200.0 |
|
| 63 (Pot Life at 30 Deg.C) |
1200.0 |
|
| 34 (Impact Resistance test
ASTM 2794) |
1500.0 |
|
| 51 (Accelerated Weathering Test (QUV) for 2000hrs) |
100000.0 |
|
| 64 (Cathodic Disbondment) |
5000.0 |
|
| 65 (Water Immersion) |
10000.0 |
|
| 66 (Flexibility, Mandrel Test (6.25 mm)) |
1200.0 |
|
| 67 (Water Resistance, Immersion 7 days) |
5000.0 |
|
| 68 (Immersion in acid, alkali and salt solution, 7 days) |
6000.0 |
|
| 69 (Scratch Hardness) |
1200.0 |
|
| 70 (Viscosity measurement (Brookfield)) |
1200.0 |
|
| 71 (Surface coverage area) |
1200.0 |
|
| 72 (Paint application) |
1200.0 |
|
| 50 (Appearance) |
1200.0 |
|
| 73 (Water Vapour Transmission (ASTM E 96)) |
5000.0 |
|
| 49 (color) |
1200.0 |
|
| 42 (Gloss Value) |
1200.0 |
|
| 74 (Viscosity (IS 101 part 1, sec 5)) |
1200.0 |
|
| 43 (Dry Film Thickness (DFT)) |
1200.0 |
|
| 75 (Holiday Detection) |
10000.0 |
|
| 76 (Impact Resistance) |
1500.0 |
|
| 77 (QUV weathering test (40 days)) |
48000.0 |
|
| 78 (Salt Spray Test (40 days)) |
48000.0 |
|
| 79 (100 - Days Acid Test (10% Sulphuric acid, Immersion methods)) |
1500.0 |
|
| 80 (Salt Spray Test 1000hrs) |
50000.0 |
|
| 81 (Curing Test (MEK Test)) |
2000.0 |
|
| 18 (Accelerated Weathering QUV test for 1000 hours (ASTM D 4587)
(Gloss Loss, Colour Change)) |
50000.0 |
|
| 81 (Curing Test (MEK Test)) |
2000.0 |
|
| 83 (Salt Spray Test -96Hrs) |
4800.0 |
|
| 84 (Corrosion Test-96hrs) |
2000.0 |
|
| 85 (Appearance of liquid paint) |
1200.0 |
|
| 86 (Specific gravity) |
1200.0 |
|
| 87 (Viscosity at 30 deg.C (Poise)) |
1200.0 |
|
| 88 (Non Volatile matter) |
1200.0 |
|
| 89 (PH of paint) |
1200.0 |
|
| 90 (Appearance & finish of dried paint film) |
1200.0 |
|
| 82 (Volume Solid a) Epoxy Sealer Coat b) Intermediate Coat c) Finish Coat) |
6000.0 |
|
| 91 (Protection against corrosion under condition of condensation (1000 hrs)) |
18000.0 |
|
| 45 (Flash Point in Deg c
(IS 101 part 1 sec 6)) |
1200.0 |
|
| 92 (Consistency) |
1200.0 |
|
| 93 (Over-coating Interval) |
1200.0 |
|
| 96 (Accelerated Weathering Test QUV 360 hrs) |
18000.0 |
|
| 97 (Taber Abrasion Test (CS 10 wheel)) |
5000.0 |
|
| 98 (Mass in kg/10 litre) |
1200.0 |
|
| 99 (As per Firm Requirement) |
2000.0 |
|
| i (Salt Spray Test for 100 hrs.) |
5000.0 |
|
| 100 (Solid Content, % by weight) |
1200.0 |
|
| 101 (Density, gm/cc) |
1200.0 |
|
| 102 (Dry Film Thickness) |
1200.0 |
|
| 103 (Touch Dry (in minutes)) |
1200.0 |
|
| 104 (Hard Dry ( in hours)) |
1200.0 |
|
| 105 (Adhesion to concrete, 14 days, Mpa) |
5000.0 |
|
| 89 (PH of paint) |
1200.0 |
|
|
| 783 |
National Test House (ER), Alipore
| Custom Food Grade Epoxy Paint (2024) - Custom Food Grade Epoxy Paint |
Custom Food Grade Epoxy Paint |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Adhesion (Mpa)) |
2500.0 |
|
| 2 (Specific gravity Comp. A & Comp. B) |
2400.0 |
|
| 3 (Pot life) |
1200.0 |
|
| 4 (Solid Content) |
1200.0 |
|
| 5 (Color) |
1200.0 |
|
| 6 (Chemical Resistance
(All Test)) |
7500.0 |
|
| 7 (Drinking Water Performance Test for Heavy metals) |
10000.0 |
|
| 8 (Dry film Thickness per coat (microns)) |
1200.0 |
|
|
| 784 |
National Test House (SR), Chennai
| IS 12436:1988 - Specification for Preformed Rigid Polyurethane (PUR) and Polyisocyanurate(PIR) foams for thermal insulation |
Specification for Preformed Rigid Polyurethane (PUR) and Polyisocyanurate(PIR) foams for thermal insulation |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| A-2 (Density(as per IS 7888:1976):) |
1000.0 |
|
|
| 785 |
National Test House (ER), Alipore
| MMDTS19041 REV-02 DATE 01.01.2024 - - |
- |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Cl 4 Table 1 Sr No 1 (Drying timeat25±2˚C a. Surface dry, max
IS:101-86 (Part3/Sec.1),
Reaffirmed 2017 or latest) |
250.0 |
|
| Cl 4 Table 1 Sr No 1 (Drying time at2 5±2˚C b) Curing time
IS:101-86 (Part3/Sec.1),
Reaffirmed 2017 or latest) |
250.0 |
|
| Cl 4 Table 1 Sr No 2 (Consistency
IS:101-89 (Part1/Sec.5),
Reaffirmed 2019 or latest) |
250.0 |
|
| Cl 4 Table 1 Sr No 3 (Finish
IS:101-87 (Part 3/Sec.4),
Reaffirmed 2019 or latest) |
250.0 |
|
| Cl 4 Table 1 Sr No 4 (Colour
IS:101-89 (Part 4/Sec.2),
Reaffirmed 2021 or latest) |
100.0 |
|
| Cl 4 Table 1 Sr No 5 (Dry film thickness per coat,
by Spray
/dipping roller/wipes
IS:101-89 (Part3/Sec.2 )
Reaffirmed 2019 or latest version
ASTM D7091 (latest version)/by DFT gauge) |
250.0 |
|
| Cl 4 Table 1 Sr No 7 (a )Scratch hardness(at1.5 Kg. load)
IS:101-88 (Part5/Sec.2),
Reaffirmed 2014 or Latest Version
b)Pencil Hardness test
ASTM D3363 or Latest Version) |
3500.0 |
|
| Cl 4 Table 1 Sr No 8 (Flexibility & Adhesion (6.25 mm mandrel)
IS:101-88 (Part5/Sec.2),Reaffirmed 2014 or Latest Version) |
250.0 |
|
| Cl 4 Table 1 Sr No 9 (Flash Point deg C
IS: 101-87(Part 1/ Sec.6),Reaffirmed 2019 or latest version) |
250.0 |
|
| Cl 4 Table 1 Sr No 10 (Resistance to salt spray
For 3000 hours
ASTM B-117/2019 or latest version) |
125000.0 |
|
| Cl 4 Table 1 Sr No 11 (Protection against
Corrosion under condition of
Condensation for 2500 hours
IS:101-88(Part6/Sec.1),Reaffirmed 2015 or latest) |
100000.0 |
|
| Cl 4 Table 1 Sr No 13 (Spreading & Covering surface area Capacity, .@ DFT ≥5microns
Appendix-I of RDSO specification no. M&C/ PCN 100/ 2018) |
500.0 |
|
| Cl 4 Table 1 Sr No 14 (Resistance to chemicals For 24 hours
1) 25% caustic soda solution (w/v)
2) 30% (V/V) H2SO4
IS:101-89 (Part7 /Sec.2) RA 2020 or latest) |
2000.0 |
|
| Cl 4 Table 1 Sr No 15 (Mass in kg/ 10litres,
IS:101-87 (Part1/Sec.7)Reaffirmed 2020 or latest) |
500.0 |
|
| Cl 4 Table 1 Sr No 16 (Impact resistance test
height 31 Inch, load 6.45pound (200 Inch pound load
ASTM2794-93 or latest) |
2000.0 |
|
| Cl 4 Table 1 Sr No 17 (Resistance to tap Water or raw water for 3000 hours
IS: 101-90 (Part7/Sec.2)
Reaffirmed- 2005 or latest) |
7500.0 |
|
| Cl 4 Table 1 Sr No 18 (Abrasion Resistance test 1000 cycle with CS-17 wheel & 1 kg load
ASTMD-4060 or latest) |
2500.0 |
|
| Cl 4 Table 1 Sr No 19 (Glossat60 angle of incidence
IS:101-88 (Part 4/ Sec.4)
Reaffirmed-2020 or latest) |
1500.0 |
|
| Cl 4 Table 1 Sr No20 (Anti-graffiti properties
ASTM D-6578/ 13 /(latest version)
Marker:Edding 3000) |
7500.0 |
|
| Cl 4 Table 1 Sr No 21 (Durability Test–
Accelerated weathering test:
QUV 4 hours and 4 hours Condensation alternatively, (750hrs), Temp. 50 O C as per ASTM G154-or latest) |
25000.0 |
|
|
| 786 |
National Test House (ER), Alipore
| RDSO M&C/ PCN/ 100/ 2018 (2018) - Specification for Epoxy Cum Polyurethane Painting System (Two Pack) for the Exterior Painting of Railway Coaches |
Specification for Epoxy Cum Polyurethane Painting System (Two Pack) for the Exterior Painting of Railway Coaches |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Chapter V (Table 1) (Abrasion resistance-1000 cycles) |
3000.0 |
|
| Chapter V (Table 1) (Humidity test.) |
11000.0 |
|
| Chapter V (Table 1) (Durability Tests : Accelerated weathering test) |
110000.0 |
|
| Chapter V (Table 1) (Accelerated Tests Resistance to water) |
1500.0 |
|
| Chapter V (Table 1) (Accelerated Tests Resistance to solvents) |
1500.0 |
|
| Chapter V (Table 1) (Accelerated Tests Resistance to oil) |
1500.0 |
|
| Chapter V (Table 1) (Accelerated Tests Resistance to 20% caustic potash (weight by volume)) |
1500.0 |
|
| Chapter V (Table 1) (Accelerated Tests (a) Resistance to 30% Sulphuric acid (weight by volume)) |
1500.0 |
|
| Chapter V (Table 1) (Gloss at 60 degree angle of incidence) |
1200.0 |
|
| Chapter V (Table 1) (Viscosity (Efflux time by Ford cup No. 4 ) at 27 degree C) |
1200.0 |
|
| Chapter V (Table 1) (Fineness of grind) |
1200.0 |
|
| Chapter V (Table 1) (Theoretical Spreading rate) |
1200.0 |
|
| Chapter V (Table 1) (Pot life(After induction time)ii) 40 ± 2 Deg C) |
2000.0 |
|
| Chapter V (Table 1) (Pot life (After induction time) at i) 27 ± 2 Deg C) |
1500.0 |
|
| Chapter V (Table 1) (Mass in Kg/10 litres) |
1200.0 |
|
| Chapter V (Table 1) (Keeping Properties for both the packs) |
5000.0 |
|
| Chapter V (Table 1) (Flash Point (b) Component B) |
1200.0 |
|
| Chapter V (Table 1) (Flash Point (a) Component A) |
1200.0 |
|
| Chapter V (Table 1) (Flexibility & Adhesion (6.25mm mandrel)) |
1200.0 |
|
| Chapter V (Table 1) (Scratch hardness (1.5 Kg LOAD)) |
1200.0 |
|
| Chapter V (Table 1) (Volume solids) |
1200.0 |
|
| Chapter V (Table 1) (Dry film thickness/Per coat) |
1200.0 |
|
| Chapter V (Table 1) (Colour) |
1200.0 |
|
| Chapter V (Table 1) (Finish) |
1200.0 |
|
| Chapter V (Table 1) (Consistency) |
1200.0 |
|
| Chapter V (Table 1) (Drying time c) Hard Dry at 70 Deg C) |
1200.0 |
|
| Chapter V (Table 1) (Drying time b) Hard Dry) |
1200.0 |
|
| Chapter III/Cl. 2.2.1 (Drying time a) Surface Dry) |
1200.0 |
|
| Chapter II/Cl. 3.2.1.2 (Pigment Content) |
1500.0 |
|
| Chapter II/Cl. 4.1 (Protection against corrosion under condition of condensation) |
9000.0 |
|
| Chapter II/Cl. 4.1 (Resistance to salt spray) |
21000.0 |
|
|
| 787 |
National Test House (ER), Alipore
| MMDTS 18034 (Rev. 04) (2019) - Technical Specification for PU based Wet -On- Wet Applicable on Exterior Painting System for LHB Types Coaches. |
Technical Specification for PU based Wet -On- Wet Applicable on Exterior Painting System for LHB Types Coaches. |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 ((Anti Graffiti test ASTM D-6578)) |
5000.0 |
|
| 4 (DFT(Dry Film Thickness)) |
1200.0 |
|
| 3 (Chemical Resistance
1)30% H2SO4
2)20% NaOH) |
2000.0 |
|
|
| 788 |
National Test House (WR), Mumbai
| IS 9862 (2017) - Specification for ready mixed paint, brushing, bituminous, black, acid, alkali, water and chlorine resistlng (First Revision) |
Specification for ready mixed paint, brushing, bituminous, black, acid, alkali, water and chlorine resistlng (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.2 (Lead Restriction as metallic lead) |
1500.0 |
|
| 4.3 table 1(i) (Drying time a) Hard dry) |
1500.0 |
|
| 4.3 table 1(ii) (Consistency) |
1000.0 |
|
| 4.3 table 1(iii) (Finish) |
500.0 |
|
| 4.3 table 1(iv) (Wet opacity meter square per liter) |
500.0 |
|
| 4.3 table 1(vi) (Colour) |
200.0 |
|
| 4.3 table 1(vii) (Flexibility and adhesion (bend test of the film with 6.25 dia Mandrel in type 1 apparatus)) |
1000.0 |
|
| 4.3 table 1(viii) (Stripping test ( By scratch hardness tester)) |
1000.0 |
|
| 4.3 table 1(ix) (Flash point deg.C) |
1000.0 |
|
| 4.3 table 1(x) (Volatile matter content, percent by mass,) |
1000.0 |
|
| 4.3 table 1(xi) (Resistance to humidity under conditions of condensation) |
2000.0 |
|
| 4.3 table 1(xii) (Resistance to water) |
1000.0 |
|
| 4.3 table 1(xiii) (Resistance to acid (Dilute Sulphuric Acid 1: 20 (v/v)) |
1500.0 |
|
| 4.3 table 1(xiv) (Resistance to alkali (Sodium Carbonate 5 % m/v Solution)) |
1500.0 |
|
| 4.3 table 1(xv) (Resistance to chlorine
(0.05 percent of chlorine (m/v).) |
1000.0 |
|
| 4.3 table 1(xvi) (Water content (if water is suspected to be present), percent by mass,) |
1500.0 |
|
| 4.3 table 1(xvii) (Keeping properties(12 Months)) |
5000.0 |
|
|
| 789 |
National Test House (NR), Ghaziabad
| Nitrile Rubber - Nitrile Rubber |
Nitrile Rubber |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Firm's requirement (Thickness) |
1000.0 |
|
| Firm's requirment (Density) |
1000.0 |
|
| Firm's requirement (Fire Rating) |
4000.0 |
|
|
| 790 |
National Test House (NR), Ghaziabad
| IS/IEC 62271 : Part 103 (2011) - High - Voltage switchgear and controlgear: Part 103 switches for rated voltages above 1 kV up to and including 52 kV |
High - Voltage switchgear and controlgear: Part 103 switches for rated voltages above 1 kV up to and including 52 kV |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.102.2.1 (Mechanical Endurance Test for Class M1 Switches) |
100000.0 |
|
| 6.2.6.1 of IEC 62271-1 (Power Frequency Voltage Test) |
10000.0 |
|
|
| 791 |
National Test House (NR), Ghaziabad
| IS/IEC 62271 : PART 100 (2008) - High - Voltage Switchgear and Controlgear Part 100 Alternating - Current Circuit - Breakers |
High - Voltage Switchgear and Controlgear Part 100 Alternating - Current Circuit - Breakers |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.101.1, 7.101.2.1, 7.101.2.2, 7.101.2.3 (Circuit Breaker Endurance Test for Class M2 10000 Operations) |
100000.0 |
|
|
| 792 |
National Test House (NER), Guwahati
| Standard FSSAI Regulations (2011) - FOOD SAFETY AND STANDARDS (FOOD PRODUCTS STANDARDS AND FOOD ADDITIVES) REGULATIONS |
FOOD SAFETY AND STANDARDS (FOOD PRODUCTS STANDARDS AND FOOD ADDITIVES) REGULATIONS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 2.10.8 (Chemical Test Results (Wheat Flour)) |
6000.0 |
|
| 2.10.8 (Chemical Test (Rice)) |
7000.0 |
|
|
| 793 |
National Test House (ER), Alipore
| Paint NTH ER Customer specification ISO (2022) - Paint NTH ER Customer specification ISO |
Paint NTH ER Customer specification ISO |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (UV weathering Test (UVA-340 lamp) ,40 days
ISO 16474 - 3 Method A Cycle 1) |
50000.0 |
|
| 3 (Salt spray Test, for 40 days
ISO 9227:2017) |
50000.0 |
|
| 4 (100 days Acid test (Foul Sewer)
(10 % v/v Sulphuric acid for 100 days)) |
20000.0 |
|
| 5 (Dry Film Thickness (DFT) ,microns) |
1200.0 |
|
| 6 (Adhesion ,Pull Off
(ASTM D 4541 /ISO 4624)) |
2500.0 |
|
| 7 (Holiday test) |
5000.0 |
|
| 10 (Impact Resistance test) |
1500.0 |
|
|
| 794 |
National Test House (ER), Alipore
| NTH ER Customer specification 2 -High Polymer |
- |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.0 (Resistance to colour change in Xenon arc light
(Blue wool Std No 8)) |
8000.0 |
|
| 7.1 (Resistance to colour change in Xenon arc light) |
5000.0 |
|
| B (Colour Fastness test of Decorative Paper) |
8000.0 |
|
|
| 795 |
National Test House (ER), Alipore
| Chemical Paint Lab NTH ER Custom Specification (2022) - Chemical Paint Lab NTH ER Custom Specification |
Chemical Paint Lab NTH ER Custom Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 2 (Adhesion by tape test (Cross Hatch)
ASTM D-3359) |
1500.0 |
|
| 3 (Adhesion Pull off strength
ASTM D 4541) |
5000.0 |
|
| 4 (MEK rub test
(ASTM D 4752)) |
500.0 |
|
|
| 796 |
National Test House (ER), Alipore
| Custom Paint 2024 new - Custom Paint 2024 new |
Custom Paint 2024 new |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (VOC) |
3000.0 |
|
| 2 (1. Lead Content
2. Cadmium Content
3. Chromium Content
4. Arsenic Content
5. Antimony Content
6. Mercury Content) |
7200.0 |
|
| 3 (Zinc Content on dry film) |
2000.0 |
|
|
| 797 |
National Test House (ER), Alipore
| CUSTOM PAINT IS 2024 NTH 01 - CUSTOM PAINT IS 2024 NTH 01 |
CUSTOM PAINT IS 2024 NTH 01 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Total Non Volatile Vehicle Content) |
1200.0 |
|
| 2 (Pigment Content (Pigmentation in Mixed Paint)) |
1200.0 |
|
| 3 (Application Properties) |
1200.0 |
|
| 4 (Drying time
1) Surface dry
2) Hard Dry) |
2400.0 |
|
| 5 (color) |
1200.0 |
|
| 6 (Finish) |
1200.0 |
|
| 8 (Flexibility & Adhesion (Bend Test)) |
1200.0 |
|
| 9 (Impact Test (1m height)) |
1500.0 |
|
| 10 (Flash Point Deg.C) |
1200.0 |
|
| 11 (Pot Life) |
1500.0 |
|
| 12 (Resistance to sea water) |
2000.0 |
|
| 13 (Resistance to Kerosene) |
1500.0 |
|
| 14 (Taber Abrasion) |
5000.0 |
|
| 15 (Resistance to Thermal Shock) |
2000.0 |
|
| 16 (Resistance to Accelerated Weathering) |
50000.0 |
|
| 1 (1) |
- |
|
| 1 () |
- |
|
|
| 798 |
National Test House (ER), Alipore
| Custom specification for paint as per IS 101 (1988) - Methods of Sampling and Test for Paints, Varnishes and related products |
Methods of Sampling and Test for Paints, Varnishes and related products |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 799 |
National Test House (ER), Alipore
| IS 5410 (2013) - Cement paint - Specification (Second Revision) |
Cement paint - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.8 ix (Recoating properties) |
1200.0 |
|
| 4.8 viii (Pot life of mixed paint) |
1200.0 |
|
| 4.8 vii (Water repellency) |
1200.0 |
|
| 4.8 vi (Resistance to dry rubbing) |
1200.0 |
|
| 4.8 v (Residue on sieve % by mass) |
1200.0 |
|
| 4.8 iv (Fastness to light
(250hrs)) |
12500.0 |
|
| 4.8iii (Colour) |
1200.0 |
|
| 4.8 ii (Finish) |
1200.0 |
|
| 4.8 i (Drying time Hard dry) |
1200.0 |
|
| 4.7 (Keeping properties) |
5000.0 |
|
| 4.6 (Durability Normal Out Door exposure Test 18 Months) |
15000.0 |
|
| Cl 4.4 (Lead Restriction) |
1200.0 |
|
| Cl 4.1 (Composition) |
3500.0 |
|
| IS 5410 Cement Paint (Coverage) |
1200.0 |
|
| VOC (Volatile Organic Compound, (VOC)) |
4000.0 |
|
| CEMENT PAINT — SPECIFICATION (Toxic metals such as lead, cadmium, chromium (VI) by atomic absorption spectrophotometric methods.) |
3600.0 |
|
| 1 () |
- |
|
|
| 800 |
National Test House (ER), Alipore
| IS 428 (2013) - Washable distemper - Specification (Third Revision) |
Washable distemper - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.7 ix (ix)Acc storage stability) |
1500.0 |
|
| 6.7 viii (viii) Resistance to alkali) |
1000.0 |
|
| 6.7 Vii (vii) Recoating properties) |
1000.0 |
|
| 6.7 Vi (vi) Residue on sieve % by mass) |
200.0 |
|
| 6.7 v (v) Fastness to light 250 hrs) |
12500.0 |
|
| 6.7 iv (iv) Colour) |
500.0 |
|
| 6.7 iii (iii)Finish) |
500.0 |
|
| 6.7 ii (ii) Consistency) |
1000.0 |
|
| 6.7 i. (b) (Drying time b) Hard dry) |
1500.0 |
|
| 6.7 i. (a) (Drying time a) surface dry) |
1500.0 |
|
| 6.6 (Keeping properties) |
5000.0 |
|
| 6.5 (Lead Restriction) |
500.0 |
|
| 6.3 (Application) |
500.0 |
|
| 6.9.2.1 (volatile organic compounds % by mass) |
2500.0 |
|
| 6.9.2.2 (toxic metals as lead, cadmium, chromium (VI) and their compounds) |
1500.0 |
|
| Clause 6.5 Table 1 (Please see Annexure) |
10000.0 |
|
| 1 () |
- |
|
|
| 801 |
National Test House (ER), Alipore
| IS 427 (2013) - Distemper, dry, colour as required - Specification (Third Revision) |
Distemper, dry, colour as required - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.3 (Lead Restriction) |
500.0 |
|
| 4.2.2.ix (Resistance to dry rubbing
IS 427 Annex F) |
100.0 |
|
| 4.2.2.viii (Resistance to Alkali
IS 427 Annex E) |
100.0 |
|
| 4.2.2vii (Recoating properties
IS 427 Annex D) |
100.0 |
|
| 4.2.2.vi (Residue on sieve
IS 427 Annex C) |
100.0 |
|
| 4.2.2.v (Fastness to light
250 Hours Exposure Xenon arc Appartaus) |
5000.0 |
|
| 4.2.2.iv (colour
IS 101 (Part 4 /Sec 2)) |
100.0 |
|
| 4.2.2.iii (Finish
IS 101 (Part 3/Sec 4)) |
100.0 |
|
| 4.2.2.ii (consistency
IS 101 (Part 1/ Sec 5)) |
100.0 |
|
| 4.2.2 i (Drying Time Hard Dry) |
200.0 |
|
| 4.1 (Form and Condtion) |
100.0 |
|
| Additional Parameters (Volatile Organic compound(VOC)
S 101: Part 2/Sec 2 & Part 2/Sec 3) |
3500.0 |
|
| Additional Parameters (Toxic metals -- (as metal) Lead,, Chromium, Cadmium --
Atomic absorption spectrophotometer) |
1500.0 |
|
| 1 () |
- |
|
|
| 802 |
National Test House (Satellite Centre), Varanasi
| IS 15853 (2009) - Textiles – Polyester blended woven suiting for uniforms |
Textiles – Polyester blended woven suiting for uniforms |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.1 (Mass) |
2000.0 |
|
| 4.1 (Nominal count) |
2000.0 |
|
| 1 (1) |
- |
|
| 4.1 (Threads/dm (Weft)) |
2000.0 |
|
| 4.1 (Threads/dm (Warp)) |
2000.0 |
|
| 4.1 (Width) |
500.0 |
|
| 4.1 (Breaking Strength on 5 cm x 20 cm strip (Warp)) |
2000.0 |
|
| 4.1 (Breaking Strength on 5 cm x 20 cm (Weft)) |
2000.0 |
|
| 4.1 (Colour fastness to washing) |
4000.0 |
|
| 4.1 (Colour fastness to Rubbing) |
2000.0 |
|
| 4.1 (pH Value of aqueous extract (Hot method)) |
1000.0 |
|
| 1 (1) |
- |
|
| 4.1 (Nominal count) |
2000.0 |
|
|
| 803 |
National Test House (SR), Chennai
| IS 1719 (2000) - Industrial Textiles - Pressed Wool Felts |
Industrial Textiles - Pressed Wool Felts |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.2 & 6.2.1 (pH value of aqueous extract - Method IS 1390) |
1200.0 |
|
| 6.2 & 6.2.1 (Water soluble matter - Test method: IS 3456) |
1500.0 |
|
| 6.2 & 6.2.1 (Ash content - Test method: IS 199) |
1200.0 |
|
|
| 804 |
National Test House (ER), Kolkata
| Custom specification for paint as per IS 101 (1988) - Methods of Sampling and Test for Paints, Varnishes and related products |
Methods of Sampling and Test for Paints, Varnishes and related products |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 805 |
National Test House (WR), Mumbai
| IS 2257 : 1989 (1989) - PAPER ADHESIVES, LIQUID GUM AND OFFICE PASTE TYPE-SPECIFICATION |
PAPER ADHESIVES, LIQUID GUM AND OFFICE PASTE TYPE-SPECIFICATION |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table 1 (Total solid (Annexure A-1 of IS 2257)) |
1200.0 |
|
| Table 1 (pH Value (Annexure A-2 of IS 2257)) |
1200.0 |
|
| Table 1 (Adhesive strength (A-3 of IS 2257)) |
1200.0 |
|
| Table 1 (Brittleness and moidture absorption of the dried flim (A-4 of IS 2257)) |
1200.0 |
|
| Table (Stability at 37 Deg. C. (A-5 of IS 2257)) |
1200.0 |
|
| Table 1 (Consistency at 27+/- 2 Deg. C (By ford cup viscometer No.4), 31 of IS 7437 : 1974) |
1200.0 |
|
| - (Ash content) |
1200.0 |
|
|
| 806 |
National Test House (NR), Ghaziabad
| IS 9738:2025 (2025) - Polyethylene Bags for General Purposes — Specification |
Polyethylene Bags for General Purposes — Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Structure and Shape) |
500.0 |
|
| 7 (Dimensions) |
2000.0 |
|
| 8.1 (Appearance) |
500.0 |
|
| 8.2 (Water Leak Test) |
2000.0 |
|
| 8.3 (Printing Ink Adhesion Test) |
1000.0 |
|
| 8.4 (Drop Test) |
2000.0 |
|
|
| 807 |
National Test House (SR), Chennai
| RDSO Specification .No. WD-01-HLS-94 (Rev.4) (2022) - Specification for Hot Coiled / Cold Coiled Helical Springs |
Specification for Hot Coiled / Cold Coiled Helical Springs |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.0 (Brinell Hardness, HBW) |
2000.0 |
|
| 2.0 (Chemical composition, % by mass) |
5000.0 |
|
|
| 808 |
National Test House (SR), Chennai
| on the lines of IS 1734 / ASTM D-2240 /IS 13630 - PVC BOARD / WPC DOOR SHUTTER/FRAME |
PVC BOARD / WPC DOOR SHUTTER/FRAME |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| custom (Density) |
1000.0 |
|
| custom (Hardness (Shore)-ASTM D 2240) |
1000.0 |
|
| custom (Tensile strength (IS 1734(9):1983)) |
2500.0 |
|
| custom (Screw holding Power-on face & End surface {IS 1734(19)}) |
1500.0 |
|
| custom (Lead content extracted from surface: {On the lines of IS 13630(16)}) |
2000.0 |
|
| custom (Compressive strength (IS 1734(10):1983)) |
1500.0 |
|
|
| 809 |
National Test House (NR), Ghaziabad
| IS 4260 (2004) - Recommended practice for ultrasonic testing of butt welds in ferritic steel (Third Revision) |
Recommended practice for ultrasonic testing of butt welds in ferritic steel (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IS 4260 (Ultrasonic examination) |
2000.0 |
|
|
| 810 |
National Test House (ER), Kolkata
| IS 3885 (Part 2) (1992) - Steel for the Manufacture of Laminated Springs (Railway Rolling Stock) - Part 2 : Rib and Groove Sections |
Steel for the Manufacture of Laminated Springs (Railway Rolling Stock) - Part 2 : Rib and Groove Sections |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (Carbon, % by mass) |
500.0 |
|
| 6 (Silicon, % by mass) |
500.0 |
|
| 6 (Manganese, % by mass) |
500.0 |
|
| 6 (Sulphur, % by mass) |
500.0 |
|
| 6 (Phosphorus, % by mass) |
500.0 |
|
| 6 (Chromium, % by mass) |
500.0 |
|
| 6 (Vanadium, % by mass) |
500.0 |
|
| 6 (Molybdenum, % by mass) |
500.0 |
|
| 8 (Decarburization Depth) |
2000.0 |
|
| 9 (Inclusion Rating) |
4000.0 |
|
| 10 (Freedom From Defects) |
1000.0 |
|
| 11 (Dimension ( Thickness & Width)) |
1000.0 |
|
| 7 (Brinell Hardness) |
2000.0 |
|
|
