NTH - Management Information System

Search by Standard No.

Reset

3850 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

National Test House (SR), Chennai

IS 5084 (1990) - Socks, nylon – Specification (first revision)

Socks, nylon – Specification (first revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 & 6 (Test Results)	15000.0

National Test House (WR), Mumbai

Custom - Cement Sand mix. - Cement - Sand Mix. [- -]

Cement - Sand Mix.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
-- (Sand Content and cement content, %)	3000.0
- - (Visual Examination)	2000.0
- - (Physical Properties)	2000.0
- - (Chemical composition of cement)	5000.0

National Test House (WR), Mumbai

Custom (0) - Cement Sand ratio

Cement Sand ratio

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1. (Cement sand ratio)	5000.0

National Test House (WR), Mumbai

IS 2347 (2023) - Domestic pressure cooker - Specification (Sixth Revision)

Domestic pressure cooker - Specification (Sixth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Capacity)	500.0
6.1.1 (Vent pipe inside diameter)	500.0
8.1 (Air Pressure of domestic pressure cooker)	1000.0
8.2 (Proof Pressure of domestic pressure cooker)	2000.0
8.3 (Operating pressure for Pressure Regulating Device)	1000.0
8.4.1 Annex-H cl. No. H-1.1 (Operating pressure of Safety Pressure Relief Device for destructible device)	1000.0
8.6.1 (Removal of Lid under Pressure (For Outer Lid Cooker))	1000.0
8.6.2 (Removal of Lid under Pressure (For Inner Lid Cooker))	1000.0
8.5 (Bursting Pressure Test)	3000.0
5.3 (Performance Test on Gasket)	1000.0
7.4 Annex-E cl. No. E-2 (Coating thickness for body)	2000.0
7.4 Annex-E cl. No. E-3 (Abrasion resistance for body)	500.0
7.4 Annex-E cl. No. E-4 (Micro Vickers Hardness for body)	2000.0
8.9 (Test for Induction Bottom)	5000.0
TDS 1 (Weight, kg.)	-
5.1 (Chemical Composition, % by mass.)	6000.0
TDS-2 (Overall Dimension- Thickness, mm.)	-
7.4 Annex-E cl. No. E-2 (Coating thickness for lid)	2000.0
7.4 Annex-E cl. No. E-3 (Abrasion resistance for lid)	500.0
7.4 Annex-E cl. No. E-4 (Micro Vickers Hardness for lid)	2000.0
5.4 (Performance test for pressure cooker handle as per IS 13395)	11000.0
0 (Test Result as per Annexure.)	20000.0
8.4.1 Annex-H cl. No. H-1.2 (Operating pressure of Safety Pressure Relief Device for Gasket Release System.)	1000.0
0 (CSD - Pressure Cooker -All Possible Test as per TDS and IS 2347)	5000.0

National Test House (ER), Kolkata

IS 5273 (1969) - Specificaiton for radius gauges

Specificaiton for radius gauges

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (Dimension- Radius (0.5mm))	-
4.2 (Dimension-Radius (0.6mm to 7mm))	3000.0
4.2 (Dimension-Radius (Above 7mm))	3000.0

National Test House (ER), Kolkata

IS 15388 (2003) - Specification for Silica Fume

Specification for Silica Fume

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 [Table 2 (ii)] (Oversize percent retained on 45 micron IS sieve,)	1000.0
5 [Table 2 (iv)] (Compressive Strength at 7 days as percent of control sample,)	3000.0

National Test House (NR), Ghaziabad

IS 15853 (2009) - Textiles – Polyester blended woven suiting for uniforms

Textiles – Polyester blended woven suiting for uniforms

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Mass)	2000.0
4.1 (Blend Composition)	2000.0
4.1 (Threads/dm (Warp))	2000.0
4.1 (Threads/dm (Weft))	2000.0
4.1 (Breaking Strength on 5 cm x 20 cm strip (Warp))	2000.0
4.1 (Breaking Strength on 5 cm x 20 cm (Weft))	2000.0
4.1 (Nominal count)	2000.0
4.1 (Length)	500.0
4.1 (Width)	500.0
4.1 (Tear Strength)	2000.0
4.1 (pH Value of aqueous extract (Hot method))	1000.0
4.1 (Colour fastness to Rubbing)	2000.0
4.1 (Colour fastness to washing)	4000.0

National Test House (ER), Alipore

IS 15965: 2012 - Pre-painted Aluminium Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain)

Pre-painted Aluminium Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

National Test House (SR), Chennai

IS 868 (1990) - Sealing wax - Specification (First Revision)

Sealing wax - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.0 (Test Results)	5000.0

National Test House (WR), Mumbai

IS 14255 (1995) - "AERIAL BUNCHED CABLES-FOR WORKING VOLTAGES UPTO AND INCLUDING 11OOVOLTS "

"AERIAL BUNCHED CABLES-FOR WORKING VOLTAGES UPTO AND INCLUDING 11OOVOLTS "

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.1 (Type tests)	20000.0
10.2 (Acceptance tests)	10000.0

National Test House (WR), Mumbai

14255 (1995) - Aerial Bunched Cables for working voltages up to and including 1100 Volts-Reaffirmed 2020 specification

Aerial Bunched Cables for working voltages up to and including 1100 Volts-Reaffirmed 2020 specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

National Test House (NR), Ghaziabad

Custom spec Flammability & Heavy metals - Custom spec Flammability & Heavy metals

Custom spec Flammability & Heavy metals

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Flammability test)	3000.0
2 (Please see Annexure for Heavy metals)	5000.0

National Test House (ER), Kolkata

IS 15997 (2012) - Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Copper)	500.0
8 (Phosphorus)	500.0
8 (Sulphur)	500.0
8 (Chromium)	500.0
8 (Nickel)	500.0
8 (Manganese)	500.0
8 (Silicon)	500.0
8 (Carbon)	500.0
6 (Freedom from Defects)	1000.0
9.2 (Tensile Strength)	1000.0
9.2 (0.2 Percent Yield Strength)	1000.0
9.2 (Percentage Elongation)	1000.0
9.4 (Erichsen Cupping Test (for thickness from 0.20 to 1.25 mm))	3000.0
12 (Dimensions)	1000.0

National Test House (ER), Alipore

ND CUSTOM 12 (2025) - Custom Specification for Steel Plate , Quard 450

Custom Specification for Steel Plate , Quard 450

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Ultrasonic Testing)	3000.0
2 (Material Hardness)	2000.0

National Test House (SR), Chennai

IS 16651 (2017) - High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement

High Strength Deformed Stainless Steel Bars and Wires for Concrete Reinforcement

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.3 (Carbon)	500.0
4.3 (Sulphur)	500.0
4.3 (Silicon)	500.0
4.3 (Manganese)	500.0
4.3 (Chromium)	500.0
4.3 (Nickel)	500.0
4.3 (Molybdenum)	500.0
4.3 (Copper)	500.0
9.3 (Bend Test)	1000.0
5.2 (Rib Area)	1000.0
7.2 (Nominal Mass per meter Run)	1000.0
9.4 (Rebend Test (Upto 25 mm))	1000.0
8.6 (Charpy Impact Test at Room Temperature)	5000.0
9.2 (0.2 % Proof Stress / Yield Stress)	1000.0
9.2 (Elongation Percent on gauge length of 5.65 Square Root of Cross- Sectional Area)	500.0
9.2 (Total Elongation at Maximum Force on gauge length of 5.65 Square Root of Crosss- Sectional Area,)	500.0
9.2 (Tensile Strength (up to 12 mm),)	500.0
9.2 (Tensile Strength (16 to 25 mm))	1000.0
9.2 (Tensile Strength (32 mm))	1500.0
9.4 (Rebend Test (32 mm))	1500.0
5.7 (Compressive strength of concrete cubes (Avg) after 28 days for 16 to 40 mm)	5250.0
5.7 (M_Pull out test for 16 to 40 mm)	9750.0
4.3 (Phosphorus)	500.0
5.7 (M_Pull out test for 0 to 12 mm)	6500.0
5.7 (Compressive strength of concrete cubes (Avg) after 28 days for 0 to 12 mm)	3500.0

National Test House (WR), Mumbai

IS 10322 : PART 5 : SEC 3 (2012) - Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (Provision for earthing)	1200.0
12 (Protection against Electric Shock)	1200.0

National Test House (WR), Mumbai

IS 733 (1983 RA 2022) - SPECIFICATION FOR WROUGHT ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS AND SECTIONS (FOR GENERAL ENGINEERING PURPOSES)

SPECIFICATION FOR WROUGHT ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS AND SECTIONS (FOR GENERAL ENGINEERING PURPOSES)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1.1 a Chemical composition (Aluminium (as Al )content,% by mass)	3000.0
5.1.1 b Chemical composition (Copper (as Cu)content,% by mass)	500.0
5.1.1 C Chemical composition (Magnesium(as Mg ) content,% by mass)	500.0
5.1.1 d Chemical composition (Silicon (as Si) content,% by mass)	500.0
5.1.1 e Chemical composition (Iron (as Fe) content,% by mass)	500.0
5.1.1 f Chemical composition (Manganese (as Mn) content,% by mass)	500.0
5.1.1 g Chemical composition (Zinc (as Zn ) content,% by mass)	500.0
5.1.1 h Chemical composition (Titanium (as Ti) content,% by mass)	500.0
5.1.1 i Chemical composition (Chromium (as Cr) content,% by mass)	500.0
5.1.1 j Chemical composition (Vanadium (as V) content,% by mass)	500.0
7 (Dimension)	1000.0
9.1 (Tensile Strenth)	2000.0
9.1 (0.2% Proof Stress)	1000.0
9.1 (Elongation)	1000.0
5 (Chemical composition, % by mass)	6000.0
0 (Anodic Coating)	2000.0
0 (Weight, kg)	1000.0

National Test House (ER), Kolkata

Custom Specification for Coal-Tar Enamel Tape - Custom Specification for Coal-Tar Enamel Tape

Custom Specification for Coal-Tar Enamel Tape

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Softening Point)	1200.0
2 (Thickness)	1000.0
3 (Filler (%))	1200.0
4 (Holiday Test)	10000.0
5 (Tape Width)	1000.0
6 (Tape Weight)	1000.0

National Test House (SR), Chennai

Customer Specification - Electrical product

Electrical product

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

National Test House (WR), Mumbai

Shore D hardness - Shore D hardness

Shore D hardness

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Shore D hardness)	1000.0

National Test House (ER), Alipore

RDSO SPECIFICATION No. M&C/ PCN/ 100/ 2018 (2018) - FULL GLOSS POLYURETHANE ENAMEL (TWO PACK)

FULL GLOSS POLYURETHANE ENAMEL (TWO PACK)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Identification of polyisocyanates)	1200.0
2 (Drying time a) Surface dry b) Hard dry c) Hard dry at 70 Deg. C)	3600.0
3 (Consistency)	1200.0
4 (Finish)	1200.0
5 (Colour)	1200.0
6 (Dry film thickness)	1200.0
7 (Volume solids)	1200.0
8 (Scratch hardness (1.5 Kg Load))	1200.0
9 (Flexibility & Adhesion (6.25 mm mandrel))	1200.0
10 (Flash point (a) Component ‘A’ (b) Component ‘B’)	2400.0
11 (Fineness of Grind)	1200.0
12 (Pot life (After induction time) at a) 27±2°C b)40±2ºC)	1500.0
13 (Gloss at 60° angle of incidence)	1200.0
14 (Mass in Kg/10 litres)	1200.0
15 (Keeping properties)	5000.0
16 (Theoretical spreading rate)	2000.0
17 (% poly isocyanate by mass, in hardener)	3000.0
18 (Viscosity (Efflux time by Ford cup No.4) of paint i.e. mix. Of two components at 27± 2 °C in Supply condition)	1200.0
19 (Accelerated Tests (a) Resistance to 30% Sulphuric acid (weight by volume) (b) Resistance to 20% caustic potash (weight by volume) (c) Resistance to oil (d) Resistance to solvents (e) Resistance to water)	7200.0
Durability test (Accelerated Test for Durability, 750 hrs (ASTM G 53, 4 hrs UV and 4 hrs Condensation))	45000.0
22 (Abrasion resistance-1000 Cycle)	5000.0
21 (Humidity Test (500 Hours))	9000.0

National Test House (ER), Alipore

RDSO SPECIFICATION No. M&C/ PCN/ 100/ 2018 (2018) - SPECIFICATION FOR EPOXY CUM POLYURETHANE PAINTING SYSTEM (TWO PACK) FOR THE EXTERIOR PAINTING OF RAILWAY COACHES, DIESEL AND ELECTRIC LOCOMOTIVES AND OTHER INDUSTRIAL APPLICATIONS

SPECIFICATION FOR EPOXY CUM POLYURETHANE PAINTING SYSTEM (TWO PACK) FOR THE EXTERIOR PAINTING OF RAILWAY COACHES, DIESEL AND ELECTRIC LOCOMOTIVES AND OTHER INDUSTRIAL APPLICATIONS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

National Test House (SR), Chennai

AWS A5.5 (2023) - Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding

Specification for Low-Alloy Steel Electrodes for Shielded Metal Arc Welding

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Chemical Composition,%)	4000.0
2.0 (Tensile Strength, MPa)	1000.0
3.0 (Yield Strength, MPa)	1000.0
4.0 (Elongation, %)	1000.0
5.0 (Radiography Test)	1000.0

National Test House (SR), Chennai

IS 7328:2020 (2020) - Specification for Polyethylene Material for Moulding and Extrusion

Specification for Polyethylene Material for Moulding and Extrusion

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.0 (Test results)	6000.0

National Test House (SR), Chennai

AWS A5.1 (2023) - Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding

Specification for Carbon Steel Electrodes for Shielded Metal Arc Welding

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Chemical Composition, %)	4000.0
2.0 (Tensile Strength, MPa)	1000.0
3.0 (Yield Strength, MPa)	1000.0
4.0 (Elongation, %)	1000.0
5.0 (Impact Test,(CVN), Joules)	5000.0
6.0 (Radiography Test)	1000.0
7.0 (Diffusible Hydrogen Test)	5000.0

National Test House (ER), Alipore

IS 17044 :2018 - Intumescent Fire Retardant Paint (Water Based) — Specification

Intumescent Fire Retardant Paint (Water Based) — Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.3, i (Colour)	1200.0
3.3, ii (Preliminary Examination)	1200.0
3.3, iii (Application properties & Finish)	1200.0
3.3, iv (Consistency)	1200.0
3.3, v, a (Surface Dry)	1200.0
3.3, v, b (Hard dry)	1200.0
3.3, vi (Dry Film Thickness)	1200.0
3.3, vii (Scratch Hardness)	1200.0
3.3, viii (Flexibility & Adhesion (Bend Test))	1200.0
3.3, ix (Mass in kg/10 litre)	1200.0
3.3, x (Pigment , % by mass)	1200.0
3.3, xi (Volatile Matter, % by mass)	1200.0
3.3, xii (Fire Test)	8000.0

National Test House (SR), Chennai

CUS/SR/CHEM/CSD-17189 (2025) - WPC SPARKLE LEMON DISHWASHING LIQUID 500ML

WPC SPARKLE LEMON DISHWASHING LIQUID 500ML

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Description)	1200.0
2 (Odour)	1200.0
3 (Colour)	1200.0
4 (Specific gravity)	1200.0
5 (pH)	1200.0

National Test House (SR), Chennai

CUS/SR/CHEM/GYPSUM (2025) - Custom standard for Gypsum sample

Custom standard for Gypsum sample

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (pH (5% solution in water))	1200.0
2 (Loss on Ignition)	1200.0
3 (Silica & Acid insolubles)	1200.0
4 (Iron and Aluminium oxides (as Fe2O3 + Al2O3))	2400.0
5 (Calcium oxide (as CaO))	1200.0
5a (Magnesium oxide (as MgO))	1200.0
6 (Sulphite Sulphur (as SO3))	1200.0
7 (Calcium sulphate dihydrate (CaSO4.2H2O))	1200.0
8 (Chloride content (as NaCl))	1200.0

National Test House (ER), Kolkata

IS 4457 (2007) - Ceramic unglazed vitreous acid resisting tiles - Specification (Second Revision)

Ceramic unglazed vitreous acid resisting tiles - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Breaking Strength)	2000.0
4 (Modulus of rupture)	2000.0
4 (Water Absorption)	1000.0
3 (Dimension-Length)	1000.0
2 ( Surface Quality)	500.0
4 (Warpage)	1000.0

National Test House (ER), Alipore

IS 104 (2017) - Ready Mixed Paint, Brushing, Zinc Chrome, Priming

Ready Mixed Paint, Brushing, Zinc Chrome, Priming

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
i) Table 1 Cl 4.3&7.1 (Consistency)	100.0
ii) Table 1 Cl 4.3&7.1 (Finish)	100.0
iii) Table 1 Cl 4.3&7.1 (Drying time-Hard dry in hours)	100.0
iv) Table 1 Cl 4.3&7.1 (Mass, kg/10 liter)	100.0
v) Table 1 Cl 4.3&7.1 (colour)	100.0
vi) Table 1 Cl 4.3&7.1 (Wet opacity, m2/10 liter)	100.0
vii.a) Table 1 Cl 4.3&7.1 (Flexibility and adhesion a. Scratch hardness (Load 1 000 g))	100.0
vii.b) Table 1 Cl 4.3&7.1 (Flexibility and adhesion b) Bend test, with 6.25 mm dia mandrel and type 1 apparatus)	100.0
viii) Table 1 Cl 4.3&7.1 (Flash point)	200.0
ix.a) Table 1 Cl 4.3&7.1 (Resistance to humidity Under conditions of condensation a)Resistance to humidity)	2000.0
ix.b) Table 1 Cl 4.3&7.1 (Resistance to humidity Under conditions of condensation b)Resistance to salt spray)	2000.0
x) Table 1 Cl 4.3&7.1 (Keeping properties)	5000.0
Cl 4.1 (Pigment content, percent by mass (IS:101 part 8/sec 2:1990))	1000.0
Cl 4.1.1 ANNEX B (Chromic anhydride(CrO3) content, percent by mass)	2000.0
Cl 4.1.1 ANNEX B (Zinc oxide(ZnO) content, percent by mass)	2000.0
Cl 4 (Zinc chrome content, percent by mass ( including Chromic anhydride & Zinc Oxide))	100.0
Cl 4 (Lead Restriction)	2000.0

First
Prev
1
2
3
4
Next
Last