NTH - Management Information System

Search by Standard No.

Reset

4407 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

3931

National Test House (ER), Kolkata

IS 9000 : Part 8 (1981) - Basic environmental testing procedures for electronic and electrical items: Part 8 vibration (Sinusoidal) test

Basic environmental testing procedures for electronic and electrical items: Part 8 vibration (Sinusoidal) test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
NA (Frequency Range : 5 Upto 3000Hz)	15000.0

3932

National Test House (ER), Kolkata

5154 - Lead Acid Traction Battery

Lead Acid Traction Battery

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3 (Dimensions)	500.0
4 (Marking and polarity)	500.0
3.1 (Test For Capacity)	10000.0
3.4 (Cyclic Endurance Test)	50000.0
3.2 (Test for retention of Charge)	20000.0
3.3 (High Rate Discharge)	20000.0

3933

National Test House (WR), Mumbai

IS 2645 (2003) - Integral waterproofing compounds for cement mortar and concrete - Specification (Second Revision)

Integral waterproofing compounds for cement mortar and concrete - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.3.b (Compressive Strength-7days)	2000.0
3.3.a (Compressive Strength-3 days)	2000.0
3.2.b (Setting Time (Final Setting Time))	500.0
3.2.a (Setting Time (Initial Setting Time))	500.0
3.1 (Permeability to Water)	3000.0
3.4 (Chloride Content, %)	1000.0

3934

National Test House (ER), Kolkata

IS 15622 (2017) - Pressed Ceramic Tiles - Specification (First Revision)

Pressed Ceramic Tiles - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6, Tables 5 to 9, Sl No (ii), (e) (Scratch Hardness of surface (Mohs' Scale)-IS13630 (Part 13):2019)	2000.0
6, Tables 5 to 9, Sl No (ii), (c) (Breaking of strength in N- IS13630 (Part 6):2019)	2000.0
6, Tables 8 and 9, Sl No (ii), (q) (Bulk Density-IS13630 (Part 2):2019)	1000.0
6, Tables 5 to 9, Sl No (ii), (b) (Modulus of rupture in N/mm²- IS13630 (Part6):2019)	2000.0
6, Tables 5 to 9, Sl No (ii), (a) (Water Absorption-IS13630 (Part 2):2019)	1000.0
6, Tables 5 to 9, Sl No (i), (e-1,2,3) (Surface Flatness-Maximum deviation in percent from flatness-(Centre curvature, Edge curvature & warpage) -IS: 13630 (Part1):2019)	500.0
6, Tables 5 to 9, Sl No (i), (c) (Straightness of sides(Facial sides)Maximum deviation in percent to corresponding work size- IS13630 (Part1):2019)	500.0
6, Tables 5 to 9, Sl No (i), (d) (Rectangularity-Maximum deviation in percent to corresponding work size-IS: 13630 (Part1):2019)	500.0
6, Tables 5 to 9, Sl No (i), (b) (Dimension-Thickness-Deviation in percent from work size -IS: 13630 (Part1):2019)	1000.0
6, Tables 5 to 9, Sl No (i), (a) (Dimensions-Width -IS:13630 (Part1):2019)	1000.0
6, Tables 5 to 9, Sl No (i), (a) (Dimensions-Length-IS13630 (Part1):2019)	1000.0
6, Tables 5 to 9, Sl No (iii), (a) (Resistance to staining IS 13630(8)/(7):2019)	1000.0
6. iii)b (Resistance to household chemicals and swimming pool water cleansers except HF and its compounds)	1500.0
6. iii)a (Resistance to acids and alkalis(with the exceptions of HF & its compounds))	1000.0
6.ii) k (Impact resistance-Co-efficient of restitution (on the lines of IS 13630(14):2019))	1000.0

3935

National Test House (ER), Kolkata

IRS S 88 (2004) - Low maintenance Lead Acid Stationary Secondary Cells for S&T Installation

Low maintenance Lead Acid Stationary Secondary Cells for S&T Installation

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.2 (Verifiational of Constructional requirements)	20000.0
7.3 (Verification of Marking and packing)	500.0
7.4 (Dimensions)	500.0
7.5 (Capacity in Ah)	20000.0
7.6 (Test for Loss of Capacity on storage in Ah)	20000.0
7.7 (Endurance Test)	90000.0
7.8 (Ampere-hour and watt hour efficiency test)	20000.0
7.9 (Test for Voltage during discharge in Ah)	1000.0
7.10 (Life Test total 1100 cycle)	100000.0
7.11 (Storage Test for 2 years)	20000.0
7.12 (Water Loss Test)	10000.0
7.13 (Equilibrium Float Current Test)	20000.0
7.14 (Sulphation Test)	20000.0
7.15 (Air Pressure Test)	10000.0

3936

National Test House (NR), Ghaziabad

IS 814:2004 - Covered electrodes for manual metal arc welding of carbon and carbon manganese steel - Specification (Sixth Revision)

Covered electrodes for manual metal arc welding of carbon and carbon manganese steel - Specification (Sixth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.6 (Radiographic Test-IS 1182)	1000.0
9.1.1 (Preparation of Weld assembly)	4000.0
9.1.1 (Preparation of Weld Assembly (For Radiography Test))	5000.0
8.2 (Combined limit for Mn+Ni+Cr+Mo+V)	500.0
8.2 (Vanadium)	500.0
8.2 (Molybdenum)	500.0
8.2 (Chromium)	500.0
8.2 (Nickel)	500.0
8.2 (Phosphorus)	500.0
8.2 (Sulphur)	500.0
8.2 (Manganese)	500.0
8.2 (Silicon)	500.0
8.2 (Carbon)	500.0
9.5 (Diffusible Hydrogen Evaluation Test-IS 11802)	5000.0
5.1.2 (Efficiency (EE) as per IS 13043)	4000.0
9.2 (Butt Weld Bend Test -IS 1599)	8000.0
9.1.3 (Impact Strength-Annex F)	3000.0
9.1.2 (Percentage Elongation on Gauge Length-Annex F)	1000.0
9.1.2 (Yield Stress -Annex F)	1000.0
9.1.2 (Ultimate Tensile Strength -Annex F)	1000.0
7.3 (Concentricity of Flux Covering With Core Wire)	250.0
7.2.2 (Arc striking End)	500.0
7.2.1 (Contact End)	500.0
7.1.2 (Length of Electrode)	500.0
9.5 (Diffusible Hydrogen Evaluation Test-IS 11802)	5000.0
7.4 (Defects of Core Wire and Coverings)	250.0
B7 (Coating Ratio)	500.0
9.3 (Running Performance Test)	2000.0

3937

National Test House (ER), Kolkata

AS 1397 (2021) - Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium

Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.4 (Both surface -Triple spot)	2000.0
3.2 (One surface- Single spot)	2000.0
2.2 (Sulfur)	500.0
2.2 (Carbon)	500.0
2.2 (Phosphorus)	500.0
2.2 (Mangnese)	500.0
2.3 (Tensile strength)	1000.0
2.3 (Yield Stress)	1000.0
2.3 (% Elongation)	1000.0
2.5.1 (Total Coated Thickness)	1000.0
2.5 (Base Metal Thickness)	1000.0
3.3 (Coating Adherence Test)	1000.0
2.4 (Bend Test)	1000.0
2.5 (Base Metal Thickness)	1000.0
3.3 (Coating Adherence Test)	1000.0
2.4 (Bend Test)	1000.0

3938

National Test House (WR), Mumbai

IS 1130 (1969) - Marble (blocks, Slabs And Tiles)

Marble (blocks, Slabs And Tiles)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Specific Gravity)	1000.0
7 (Moisture Absorption (as per 1124), %)	1000.0
7 (Hardness)	2000.0

3939

National Test House (NR), Ghaziabad

IS 14587 (1998) - Prelaminated Medium Density Fibre Board -specification

Prelaminated Medium Density Fibre Board -specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.14 (Resistance to Stain-IS 14587:1998 Annex F)	1500.0
10.13 (Resistance to Cigarette Burn-IS 14587:1998 Annex E)	500.0
10.12 (Resistance to Crack-IS 14587:1998 Annex D)	500.0
10.11 (Resistance to Steam-IS 14587:1998 Annex C)	500.0
10.10, Table 1, Sl No 1.9 (Resistance to Surface Abrasion-IS 14587:1998 Annex B)	5000.0
10. 9, Table 1, Sl No 1.8 (Screw Withdrawal Test -IS 2380 (Part 14):1977)	1500.0
10. 8, Table 1, Sl No 1.7 (Tensile strength perpendicular to surface after ageing-IS 14587:1998 & -IS 2380 (Part 5):1977)	2000.0
10.7, Table 1, Sl No 1.6 (Tensile strength perpendicular to surface-IS 2380 (Part 5):1977)	2000.0
10.6, Table 1, Sl No 1.4 & 1.5 (Modulus of Rupture and Modulus of Elasticity-IS 2380 (Part 4):1977)	2500.0
10.5,Table 1, Sl No 1.3 (Thickness swelling-IS 2380 (Part 17):1977)	1500.0
10.4, Table 1, Sl No 1.2 (Water Absorption-IS 2380 (Part 16):1977)	1000.0
10.3 (Moisture Content-IS 2380 (Part 3):1977)	1000.0
10.2, Table 1, Sl No 1.1 (Density-IS 2380 (Part 3):1977)	500.0
8 (Dimension & Tolerances-IS 12406)	500.0

3940

National Test House (WR), Mumbai

Technical Data Specification (0) - Technical Data Specification

Technical Data Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
NA (Dimensions)	500.0
NA (Capacity)	500.0
NA (Dimensions)	500.0
1 ()	-

3941

National Test House (SR), Chennai

IS 13192 (1991) - Household sewing machines - Hand attachment assembly

Household sewing machines - Hand attachment assembly

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.1 (Workmanship and finish)	500.0
8.2 (Workmanship and finish)	500.0
8.1 (Workmanship and finish)	500.0
8.11 (Workmanship and finish)	500.0
12.1 (Tests on Hand Attachment Assembly)	500.0

3942

National Test House (ER), Kolkata

MORTH : Part 5 (2013) - SPECIFICATIONS FOR ROAD AND BRIDGE WORKS/ASTM

SPECIFICATIONS FOR ROAD AND BRIDGE WORKS/ASTM

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

3943

National Test House (ER), Kolkata

EIL B224-000-79-41-PLS-01 : Part 5 (2019) - Job specification for surface preparation and protective coating

Job specification for surface preparation and protective coating

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

3944

National Test House (WR), Mumbai

IS 516 : Part 5 : Sec 4 (2020) - Hardened Concrete Methods of Test Part 5 Non-Destructive Testing of Concrete Section 4 Rebound Hammer Test ( First Revision )

Hardened Concrete Methods of Test Part 5 Non-Destructive Testing of Concrete Section 4 Rebound Hammer Test ( First Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Rebound hammer test (field test))	15000.0

3945

National Test House (WR), Mumbai

IS 516 : Part 4 (2018) - Hardened Concrete -Methods of Test -Part 4, Sampling, Preparing and Testing of Concrete Cores ( First Revision ) ( IS 516 :(Part 4):2018)

Hardened Concrete -Methods of Test -Part 4, Sampling, Preparing and Testing of Concrete Cores ( First Revision ) ( IS 516 :(Part 4):2018)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Equivalent Cube Strength of Concrete core 1 set IS 516 (Part 4):2018)	4000.0
8 (Equivalent Cube Strength of core samples with preparation, N/mm^2)	5000.0
ASTM (Cement - Aggregate content in Concrete core)	4000.0

3946

National Test House (WR), Mumbai

IS 1489 (Part 1) (2015) - Portland pozzolana cement - Specification: Part 1 fly Ash Based

Portland pozzolana cement - Specification: Part 1 fly Ash Based

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7, Table 2, Sl No 1 (Fineness IS 4031(2):1999)	1000.0
7, Table 2, Sl No 6 (Drying Shrinkage IS 4031(10):1988)	1000.0
7, Table 2, Sl No 4c (28 Days Compressive strength, IS 4031(6):1988)	1000.0
7, Table 2, Sl No 4b (7 Days Compressive strength, IS 4031(6):1988)	1000.0
7, Table 2, Sl No 4a (3 Days Compressive strength, IS 4031(6):1988)	1000.0
7, Table 2, Sl No 3b (Setting time-Final IS 4031(5):1988)	250.0
7, Table 2, Sl No 3a (Setting time-Initial IS 4031(5):1988)	250.0
7, Table 2, Sl No 2b (Soundness-autoclave method IS 4031(3):1988)	1000.0
7, Table 2, Sl No 2a (Soundness-Lechatlier method IS 4031(3):1988)	500.0
6, Table 1, Sl No 6 (Alkali content IS 4032:1985)	2000.0
6, Table 1, Sl No 5 (Chloride content, IS 4032:1985)	800.0
6, Table 1, Sl No 4 (Loss on ignition IS 4032:1985)	800.0
6, Table 1, Sl No 3 (Total Sulphur content IS 4032:1985)	800.0
6, Table 1, Sl No 2 (Magnesia IS 4032:1985)	600.0
6, Table 1, Sl No 1 (Insoluble residue, IS 4032:1985)	600.0
13 (Consistency of Cement)	500.0
7 (Compressive strength-24 +/- 1 h)	1000.0
Custom (Fineness of Cement by Wet Sieving [as per IS 4031 (Part 15): 1991])	500.0

3947

National Test House (ER), Kolkata

IEC 60896 : Part 21-22 (2004) - Stationary Lead Acid Batteries Valve Regulated Type

Stationary Lead Acid Batteries Valve Regulated Type

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Gas Emission Test)	30000.0
6.2 (High Current tolerance Test)	20000.0
6.6 (Content and durability of required marking)	500.0
6.7 (Material Identification)	3000.0
6.11 (Discharge Capacity)	60000.0
6.12 (Charge retention during Storage)	50000.0
6.13 (Float Service with daily discharges)	30000.0
6.14 (Recharge behaviour)	30000.0
6.15 (Service Life at an operating temp. at 40 Deg C)	300000.0
6.16 (Impact of a stress temperature of 50Deg C or 60 Deg C)	250000.0
6.17 (Abusive over discharge)	60000.0
6.19 (Low temperature sensitivity)	30000.0

3948

National Test House (ER), Kolkata

IS 13252 (2010) - Information Technology Equipments, Class I Product

Information Technology Equipments, Class I Product

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2.1.1.6 (Manual Controls)	2000.0
2.3.3 (Separations from Hazardous Voltages)	1000.0
2.5 (Limited Power Source)	1000.0
2.6 (Protective earthing Conductors and protective bonding Conductors)	2000.0
2.7 (Over Current and earth fault protection primary Circuit)	1000.0
2.8 (Protection requirements for safety interlocks)	500.0
2.9 (Humidity Condition)	10000.0
2.10.2 (Determination of Working Voltage)	1000.0
3 (Wiring Connection and Supplies)	1000.0
4.2.1,4.2.2,4.2.3,4.2.4 (Steady force Test)	1000.0
4.2.5 (Impact Test Apparatus)	500.0
4.2.6 (Drop Test)	1000.0
4.2.7 (Stress Relief Test)	1000.0
4.3.1 (Edges and corners)	500.0
4.3.4 (Securing of Parts)	500.0
4.3.6 (Direct Plug in Equipment)	1000.0
4.3.8 (Batteries)	1000.0
4.3.9 (Oil & Grease)	500.0
4.4.2 (Protected in operator access area)	1000.0
4.4.3 (Protected in restricted access Location)	1000.0
4.4.4 (Protected in service access Location)	1000.0
4.5.2. (Temperature Test)	1000.0
4.5.3. (Temperature Limits for Materials)	2000.0
4.5.4. (Touch Temperature Limits)	1000.0
4.5.5. (Resistance to abnormal Heat)	2000.0
4.6.3,4.6.4,4.6.4.1,4.6.4.2,4.6.4.3 (Top, Bottom and Side Opening)	500.0
4.6.5 (Adhesives for Constructional Purposes)	500.0
5.2 (Electric Strength)	5000.0
6.1.1,6.1.2 (Protection of Telecommunication network service person and user to network Protection from Hazardous Voltages)	1000.0
6.2.1 (Protection of equipments user from overvoltage on Telecommunication network)	1000.0
6.2.2 (Electrical Strength Test)	2000.0
6.3 (Protection of the Telecommunication wiring system from over heating)	2000.0
7.2 (Protection of cable distribution system service persons and user of other equipment connected to the system from hazardous voltage in the equipment)	2000.0
7.3 (Protection of equipment user from over voltages on the cable distribution)	1000.0
4.7.2,4.7.2.1,4.7.2.2 (Resistance to force (Reducing the risk of ignition and spread of flame))	1000.0
IS 13252 (PART 1) (Neutral conductor)	500.0
IS 13252 (PART 1) (Voltage Limit of Hand held equipment)	500.0
IS 13252 (PART 1) (Voltage Surge Test)	2000.0
2.1.1.8 (Energy Hazard DC Mains Supply)	1000.0

3949

National Test House (ER), Kolkata

IS 616 (2017) - Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

Audio, video and similar electronic apparatus - Safety requirements (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Marking & Instructions)	500.0
7.1.1 (Heating under normal Operating Conditions, Accessible parts)	5000.0
7.1.3 (Parts other than windings, providing Electrical Insulation)	1000.0
7.1.4 (Parts acting as a support or a mechanical barrier & Winding)	1000.0
7.2 (Heat Resistance of insulating Material)	1000.0
8.1 to 8.16 (Constructional Requirements with regard to the Protection against Electrical Shock)	1000.0
8.17 (Requirement of Insulating winding wires for use without additional interleaved insulation)	500.0
8.18 (Endurance Test for wound components with insulated winding wires without additional interleaved insulation)	500.0
8.19.1,&8..19.2 (Disconnection from the mains)	1000.0
8.20 & 8.21 (Main Switch)	500.0
9.1.2 & 9.1.3 (Shafts of operating, Knobs , handles, levers and the like)	500.0
9.1.4 (Terminals)	500.0
9.1.5 (Preset Controls)	1000.0
9.1.6 (Withdrawal of main Plugs)	1000.0
9.1.7 (Resistance to external s-force)	1000.0
9.2 (Removal of protective cover)	500.0
10.2 (Surge Test)	10000.0
10.3 (humidity Treatment)	20000.0
10.4 (Insulation Resistance and Dielectric Strength)	500.0
11.1 (Electrical Shock Hazard)	500.0
11.2,11.2.1, 11.2.2,11.2.3,11.2.4,11.2.5, (Heating)	3000.0
12.1.3 (Vibration Test)	5000.0
12.1.4 (Impact Test)	500.0
12.1.5 (Drop Test)	500.0
12.1.6 (Stress Relief Test)	500.0
12.2 (Fixing of actuating Elements)	1000.0
12.3 (Remote Control devices held in hand)	500.0

3950

National Test House (ER), Kolkata

IS 1652 (2013) - Stationary cells and batteries, lead - Acid type with plante positive plates - Specification (Fourth Revision)

Stationary cells and batteries, lead - Acid type with plante positive plates - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Verification of Constructional Requirements)	5000.0
7 (Verification of Marking)	2000.0
6.1 (Verification of Dimensions)	3000.0
10.6 (Test for Capacity)	25000.0
10.11 (Test for Voltage during Discharge)	10000.0
10.10 (Ampere-hour and watt hour efficiency test)	10000.0
10.8 (Test for loss of Capacity on Storage)	10000.0
10.9 (Endurance Test)	90000.0
10.12 (Loss of water test)	10000.0
10.13 (Test for suitability of floating battery operation)	10000.0
10.14 (Short circuit & Internal Resistance Test)	15000.0

3951

National Test House (ER), Kolkata

IS 6304 (1992) - Stationary batteries - Lead - Acid type - With pasted positive plates - Specification (Second Revision)

Stationary batteries - Lead - Acid type - With pasted positive plates - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.3,4.4,4.6,,4.8,4.9,4.10 &7 (Visual Inspection)	10000.0
4.1,4.2,4.5,4.7&4.11 (Physical Verification)	25000.0
6 (Physical Verification)	500.0
8.6 (Capacity)	20000.0
8.7 (Capacity)	10000.0
8.8.1 (Ampere- Hour Efficiency)	7500.0
8.8.2 (Watt Hour Efficiency)	7500.0
8.9 (Capacity)	45000.0
8.1 (Voltage during Discharge)	5000.0
9.8 (Voltage)	10000.0

3952

National Test House (ER), Kolkata

IS 14257 (2019) - Lead - Acid storage batteries for motor vehicles with light weight and high cranking performance - Specification (First Revision)

Lead - Acid storage batteries for motor vehicles with light weight and high cranking performance - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.3.1 (Physical Examination)	20000.0
9.3.2 (Dimensions and layout)	500.0
9.3.3 (Marking)	500.0
9.3.4 (5-hr capacity Test)	20000.0
9.3.5 (High rate discharge test at -15℃)	20000.0
9.3.6 (Cold cranking Ampere at -18℃)	20000.0
9.3.7 (Reserve Capacity Test)	20000.0
9.3.8 (Charge Acceptance test)	15000.0
9.3.9 (water loss in percent)	10000.0
9.3.10 (Charge retention test)	5000.0
9.3.11 (Light load Endurance test)	30000.0
9.3.12 (Life cycle test)	50000.0
9.3.13 (Over-charge Endurance test)	5000.0
9.3.14 (Electrolyte retention test)	5000.0
9.3.15 (Vibration resistance test)	10000.0
9.3.16 (Strength of terminal test)	5000.0
9.3.17 (Robustness to fastening test)	5000.0
Annex. B-1.2 (Residual Capacity Test)	10000.0

3953

National Test House (ER), Kolkata

IS 16270 (2023) - Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

Secondary cells and batteries for solar photovoltaic application - General requirements and methods of test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.1 (Rated Capacity)	20000.0
8.2 (Endurance Test)	80000.0
8.3 (Charge retention test)	10000.0
8.4 (Cycling Endurance in photovoltaic application( Extreme Conditions))	90000.0
8.5 (Recovery from sulphation Test)	10000.0
8.6 (Water loss Test)	10000.0

3954

National Test House (ER), Kolkata

IS 13369 (1992) - Stationary lead - Acid batteries (With Tubular Positive Plates) in monobloc container - Specification

Stationary lead - Acid batteries (With Tubular Positive Plates) in monobloc container - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11.2 (Verification of Constructional Requirements)	20000.0
11.3 (Verification of Marking)	1000.0
11.4 (Verification of Dimensions)	1000.0
11.5 (Test for Capacity)	20000.0
11.8 (Ampere-hour and watt hour efficiency test)	10000.0
11.6 (Test for loss of Capacity on Storage)	10000.0
11.7 (Endurance Test)	45000.0
11.9 (Water loss test)	10000.0
11.1 (Equilibrium Float current test)	10000.0
11.5 (Test for Capacity at -13 deg C to -15 deg C)	20000.0

3955

National Test House (WR), Mumbai

IS IS 1708 : Part 15 (1986) - Timber

Timber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Nail and screw holding power)	3000.0

3956

National Test House (WR), Mumbai

IS IS 1708 : Part 12 (1986) - Timber

Timber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Tensile Strength parallel to Grain)	2000.0

3957

National Test House (WR), Mumbai

IS IS 1708 : Part 11 (1986) - Timber

Timber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Shear strength parallel to Grain)	1500.0

3958

National Test House (WR), Mumbai

IS IS 1708 : Part 9 (1986) - Timber

Timber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Compressive Strength Perpendicular to Grain)	3000.0

3959

National Test House (WR), Mumbai

IS IS 1708 : Part 8 (1986) - Timber

Timber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Compressive Strength Parallel to Grain)	3000.0

3960

National Test House (ER), Kolkata

IS 8662 (2004) - Enamel, synthetic exterior: (A) undercoating (B) finishing, for railway coaches - Specification (Second Revision)

Enamel, synthetic exterior: (A) undercoating (B) finishing, for railway coaches - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.6.xiii (Keeping properties)	5000.0
6.6.xii (Accelerated storage stability test, at 60 degC, 96 h)	3000.0
6.6.xi.b (Phthalic anhydride content of non-volatile vehicle)	3000.0
6.6.xi.a (Volume solids)	3000.0
6.6.x (Flash point)	1500.0
6.6.ix (Flexibility and adhesion)	1200.0
6.6.viii (Scratch hardness after 48 h air drying (1 000 g weight))	1500.0
6.6.vii (Water content (if suspected to be present) - IS 101 (Part 2/Sec 1))	1200.0
6.6.vi (Colour)	1200.0
6.6.v (Fineness of grind,)	1200.0
6.6.iv.b (Gloss , 60 deg)	1500.0
6.6.iv.a (Fnish)	1200.0
6.6.iii.d (Drying time Tack Free)	1200.0
6.6.iii.c (Hard dry at 70 DegC with 15 min flash- off time)	1200.0
6.6.iii.b (Drying time Hard Dry)	1200.0
6.6.iii.a (Drying time Surface Dry)	1200.0
6.6.ii (Mass, in kg/101itres)	1500.0
6.6.i.b (Viscosity byFord cup No. 4)	1200.0
6.6.i.a (Consistency)	1200.0
6.5 (Resistance to Alkali (for Finishing Only)	1500.0
6.4 (Resistance to Acid (for Finishing Only))	1500.0
6.3 (Durability( Normal Outdoor Exposer))	10000.0
6.2.6 (Application Properties)	1200.0
6.2.5 (Thinning Properties)	1200.0
6.2.4 (Skin Formation)	1200.0
6.2.3 (Freedom from Coarse Particles)	1200.0
6.2 (Condition in Container)	1200.0
6.1 (Composition)	1200.0