| 3991 |
National Test House (ER), Kolkata
| IS 133 : Part 1 (2013) - Enamel, interior: (A) undercoating (B) finishing - Specification: Part 1 for household and decorative purposes (Fifth Revision) |
Enamel, interior: (A) undercoating (B) finishing - Specification: Part 1 for household and decorative purposes (Fifth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.9, xiv (Keeping properties) |
5000.0 |
|
| 5.9, viii (Fasteness to light) |
5000.0 |
|
| 5.9,xiii (Accelerated storage stability test) |
2000.0 |
|
| 5.9,xii (Volume solids percent) |
1200.0 |
|
| 5.9,xi (Flash point) |
1200.0 |
|
| 5.9,x,b (Flexibility and adhesion:Bend test with 6.25 mm dia
Mandre in type 1 apparatus.) |
1200.0 |
|
| 5.9,x,a (Flexibility and adhesion: Scratch hardness (Load 1 000 g), ) |
1200.0 |
|
| 5.9,ix (Resistance to water) |
1200.0 |
|
| 5.9,vii (Wet opacity) |
1200.0 |
|
| 5.9,vi (colour) |
1200.0 |
|
| 5.9,v (Fineness of grind, microns) |
1200.0 |
|
| 5.9, iv,b (Gloss, 60º) |
1200.0 |
|
| 5.9,iv,a (Finish) |
1200.0 |
|
| 5.9,iii
b ( Viscosity by B 4 ford cup) |
1200.0 |
|
| 5.9,iii
a ( Consistency ) |
1200.0 |
|
| 5.9,ii (Mass, kg/10litre) |
1200.0 |
|
| 5.9.i c (Drying time : Tack free) |
1200.0 |
|
| 5.9.i b (Drying time : Hard dry) |
1200.0 |
|
| 5.9.i a (Drying time : Surface dry) |
1200.0 |
|
| 5.8 (Lead Restrictions) |
2500.0 |
|
| 5.7 (Freedom from Yellowing) |
1200.0 |
|
| 5.6 (Thinning Properties) |
1200.0 |
|
| 5.5 (Skin formation) |
1200.0 |
|
| 5.4 (Freedom from Coarse Particles) |
1200.0 |
|
| 5.3 (Condtion in container) |
1200.0 |
|
| 5.2 (Total Non-volatile content) |
1200.0 |
|
|
| 3992 |
National Test House (SR), Chennai
| IS 17569 (2021) - Insulated Containers for Food Storage — Specification |
Insulated Containers for Food Storage — Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.14 (Visual observation) |
1000.0 |
|
| 7.13.3 (Visual observation) |
500.0 |
|
| 7.13.2 (Visual observation) |
500.0 |
|
| 7.13.1 (Length measurement) |
500.0 |
|
| 7.12 (Visual observation) |
2000.0 |
|
| 7.9 (Visual observation) |
2000.0 |
|
| 7.8 (Visual observation) |
2000.0 |
|
| 7.7 (Visual observation) |
3000.0 |
|
| 7.6.2 (Visual observation) |
1000.0 |
|
| 7.6.1 (Visual observation) |
3000.0 |
|
| 7.5 (Temperature measurement) |
3000.0 |
|
| 7.4 (Temperature measurement) |
3000.0 |
|
| 5.1 (Visual observation) |
500.0 |
|
| 7.1.2 (Thickness measurement of container) |
500.0 |
|
| 4.1 (Capacity measurement) |
500.0 |
|
| 4.1 (Nominal capacity) |
500.0 |
|
| 7.1.2 (Outer Protective Case and Accessories) |
500.0 |
|
| 5.1 (Workmanship) |
500.0 |
|
| 7.4 (Heat Retention Capability Test) |
3000.0 |
|
| 7.5 (Cold Retention Capability Test) |
3000.0 |
|
| 7.6.1 (Drop Impact Test
) |
3000.0 |
|
| 7.6.2 (Pendulam Impact Test
) |
1000.0 |
|
| 7.7 (Strength of the Handle
) |
3000.0 |
|
| 7.9 (Leakage Test
) |
2000.0 |
|
| 7.13.1 (Length of the Shoulder Strap
) |
500.0 |
|
| 7.13.2 (Stability Test
) |
500.0 |
|
| 7.13.3 (Cleaning Test
) |
500.0 |
|
| 7.14 (Seepage Test
) |
1000.0 |
|
| 1.0 (Dimensions) |
2000.0 |
|
| 2.0 (Weight) |
500.0 |
|
| 7.11 (Staining Test) |
4000.0 |
|
|
| 3993 |
National Test House (WR), Mumbai
| IS 1293 (2019) - Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Fourth Revision) |
Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8 (Marking) |
500.0 |
|
| 6 (Rating) |
50.0 |
|
| 7 (Classification) |
100.0 |
|
| 9 (Checking of Dimensions ) |
500.0 |
|
| 11 (Provisions for Earthing ) |
100.0 |
|
| 12 (Terminals) |
- |
|
| 21 ( Normal Operation (For 6 & 16A)) |
4000.0 |
|
| 20 (Breaking Capacity) |
1500.0 |
|
| 19 (Temperature rise test (For 6 & 16A)) |
500.0 |
|
| 21 ( Normal Operation (For 6A)) |
1200.0 |
|
| 21 ( Normal Operation (For 16A)) |
3200.0 |
|
| 19 (Temperature rise test (For 16A)) |
2000.0 |
|
| 19 (Temperature rise test (For 6A)) |
1800.0 |
|
| 28 (Test for Resistance to Abnormal Heat to fire and to tracking) |
- |
|
| 25 (Resistance to heat ) |
- |
|
| 10 (Protection against Electric Shocks ) |
100.0 |
|
| 13 (Constructional Requirements) |
100.0 |
|
| 16 ( Resistance to Ageing to to Harmful ingress of water and to humidity) |
1000.0 |
|
| 17 (Insulation Resistance and electric strength ) |
- |
|
| 18 (Operation of earthing contacts) |
800.0 |
|
| 22 (Force Necessary to withdraw the Plug ) |
- |
|
| 23 (Flexible cables and their connection ) |
- |
|
| 26 (Test for Screws Current carrying parts & connection ) |
200.0 |
|
| 27 (Creepage distances and clearances and distances through sealing compound) |
200.0 |
|
| 29 (Test for Resistance to Rusting) |
- |
|
| 14 (Construction of Plugs & Portable Socket outlets ) |
- |
|
| 15 (Inter-locked socket outlets ) |
- |
|
| 30 (Additional tests on pins provided with insulating Sleeves ) |
- |
|
| 25.2 (Ball pressure test at 125 ± 20C for one hour for parts of insulating material necessary to retain current carrying parts ) |
- |
|
| 4 (General Requirement) |
- |
|
| 3 (Terminology) |
- |
|
| 5 (General Notes on Tests) |
- |
|
| 24 (Mechanical Strength) |
- |
|
|
| 3994 |
National Test House (ER), Kolkata
| IS 9000 : Part V : Sec 2 (1981) - Electric and Electronics items (size less than 1 cubic meter) |
Electric and Electronics items (size less than 1 cubic meter) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 3995 |
National Test House (ER), Kolkata
| IS 9000 : Part II : Sec 2 (1977) - Electric and Electronics items (size less than 1 cubic meter) |
Electric and Electronics items (size less than 1 cubic meter) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 3996 |
National Test House (ER), Kolkata
| IS 9000 : Part 5 : Sec 1&2 (1981) - Electric and Electronics items (size less than 1 cubic meter) |
Electric and Electronics items (size less than 1 cubic meter) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 3997 |
National Test House (ER), Kolkata
| IS 694 (2010) - Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1100 v (Fourth Revision) |
Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1100 v (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table 1.i.a, ii.d , iii.a.4 (Conductor Resistance) |
1500.0 |
|
| Table 1. iii. a.1 , ii.a (Annealing Test (for copper)) |
1000.0 |
|
| Table 1. iii. a.2 , ii.b (Tensile Test for aluminium) |
1000.0 |
|
| Table 1. iii. a.3 , ii.c (Wrapping Test (for Aluminium)) |
500.0 |
|
| Table 1. iii. a.5 (Persulphate Test (for tinned copper conductor only))) |
1000.0 |
|
| Table 1. iii. b , ii.e (Tests for overall dimension and thickness of insulation/sheath) |
1000.0 |
|
| Table 1. iii. c.1, ii.f (Physical tests for insulation- Tensile strength and elongation at break) |
1500.0 |
|
| Table 1. iii. c.2 (Physical tests for insulation - Loss of mass test) |
1500.0 |
|
| Table 1. iii. c.3 (Physical tests for insulation - Ageing in air oven) |
2000.0 |
|
| Table 1. iii.c.4 (Physical tests for insulation - Shrinkage test) |
1000.0 |
|
| Table 1. iii.c.5 (Physical tests for insulation - Heat shock test) |
1000.0 |
|
| Table 1. iii. c.6 (Physical tests for insulation - Hot deformation Test) |
500.0 |
|
| Table 1. iii.c.7 (Physical tests for insulation - Thermal stability test) |
1000.0 |
|
| Table 1. iii. e.5, ii.j (Flammability Test) |
500.0 |
|
| Table 1. iii. c.11 , ii.k (Physical tests for insulation - Oxygen index test) |
5000.0 |
|
| Table 1. iii. c.12 , ii.m (Physical tests for insulation - Test for temperature index) |
5000.0 |
|
| Table 1. iii. c.13 , ii.n (Physical tests for insulation - Test for halogen acid gas evaluation) |
5000.0 |
|
| Table 1. iii. c.14 , ii.p (Physical tests for insulation - Test for smoke density rating) |
5000.0 |
|
| Table 1. iii. d.1 (Physical tests for sheath - Tensile strength and elongation at break) |
1500.0 |
|
| Table 1. iii. d.2 (Physical tests for Sheath - Loss of mass Test) |
1500.0 |
|
| Table 1. iii. d.3 (Physical tests for sheath - Ageing in air oven) |
2000.0 |
|
| Table 1. iii. d.4 (Physical tests for sheath - Shrinkage Test) |
500.0 |
|
| Table 1. iii. d.5 (Physical tests for sheath - Heat shock Test) |
500.0 |
|
| Table 1. iii. d.6 (Physical tests for sheath - Hot deformation Test) |
500.0 |
|
| Table 1. iii. d.7 (Physical tests for sheath - Thermal stability) |
1000.0 |
|
| Table 1. iii. d.8 (Physical tests for sheath - Oxygen Index Test) |
5000.0 |
|
| Table 1. iii. d.9 (Physical tests for sheath - Test for temperature Index) |
5000.0 |
|
| Table 1. iii. d.10 (Physical tests for sheath - Halogen acid gas evaluation) |
5000.0 |
|
| Table 1. iii. d.11 (Physical tests for sheath - Test for smoke density) |
5000.0 |
|
| Table 1. iii. e.1 (High Voltage Test (Water immersion Test)) |
3000.0 |
|
| Table 1. iii. e.2 , ii.h (High voltage test or Spark test) |
1500.0 |
|
| Table 1.iii.e.3 , ii.g (Insulation resistance) |
2000.0 |
|
| Table 1. iii. e.4 (High voltage test (Cl. 10.2)(at room temperature)) |
1500.0 |
|
| Table 1. iii. e.6 (Addition Ageing test (OU Cables only)) |
2000.0 |
|
| - (Test on 2nd core) |
2000.0 |
|
| - (Test on 3rd core) |
2000.0 |
|
| - (Test on 4th core) |
2000.0 |
|
| Table 1 tests Sl No 1 (iii) d (12) (Cold bend test) |
1000.0 |
|
| Table 1. iii. d.13 (Cold impact test(for sheath)) |
- |
|
|
| 3998 |
National Test House (NWR), Jaipur
| RDSO IRS S 63/2014 : Part 0 : Sec Revision 4 (2014) - PVC Insulated,underground, unscreened cable for Railway Signalling |
PVC Insulated,underground, unscreened cable for Railway Signalling |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.5.a) (Depth of indentation) |
1500.0 |
|
| 5.3 (i) (Water immersion test ) |
100.0 |
|
| 5.3 (h) (Insulation resistance test ) |
1500.0 |
|
| 5.3 (h) (Insulation resistance test ) |
1000.0 |
|
| 5.3 (g) (High Voltage Test ) |
1000.0 |
|
| 5.3 (f) (Flammability Test) |
1500.0 |
|
| 5.3 (e) (Elongation of Outer sheath) |
500.0 |
|
| 5.3 (e) (Elongation of inner sheat) |
500.0 |
|
| 5.3 (e) (Tensile Strength of insulation) |
500.0 |
|
| 5.3 (e) (Elongation of insulation) |
500.0 |
|
| 5.3 (e) (Tensile Strength ofouter sheath) |
500.0 |
|
| 5.3 (e) (Tensile Strength of inner sheath) |
500.0 |
|
| 5.3 (d) (Thickness ofinner sheath ) |
500.0 |
|
| 5.3 (d) (Thickness ofOuter sheath ) |
500.0 |
|
| 5.3 (d) (Thickness of insulation - Minimum) |
500.0 |
|
| 5.3 (d) (Thickness of insulation-Average ) |
500.0 |
|
| 5.3 (c) (Resistivity test.) |
100.0 |
|
| 5.3 (c) (Dimensions ofArmour Wires) |
1000.0 |
|
| 5.3 (b) (Conductor resistance ) |
500.0 |
|
| 5.3 (a) (Dimensions) |
1000.0 |
|
| 5.2 (i) (Water immersion test DC TEST) |
100.0 |
|
| 5.2 (i) (Water immersion test AC TEST) |
3000.0 |
|
| 5.2 ( h) (Insulation resistance test ) |
1500.0 |
|
| 5.2 ( h) (Insulation resistance test ) |
1000.0 |
|
| 5.2.g) (High Voltage 4 kV a.c.) |
1000.0 |
|
| 5.2 (f) (Flammability Test) |
1500.0 |
|
| 5.3 (j) (Sequential marking . ) |
1000.0 |
|
| 5.3 (c) (Winding test /Torsion test) |
1000.0 |
|
| Cl. 5.2(e) (Elongation of Outer sheath) |
500.0 |
|
| Cl. 5.2(e) (Elongation of inner sheath) |
500.0 |
|
| Cl. 5.2(e) (Elongation of insulation) |
500.0 |
|
| Cl. 5.2(e) (Tensile Strength o fouter sheath) |
500.0 |
|
| 5.3 (e) (Tensile Strength of inner sheath) |
500.0 |
|
| Cl. 5.2(e) (Tensile Strength of insulation) |
500.0 |
|
| 5.2 (d) (Thickness of inner sheath ) |
500.0 |
|
| 5.2 (d) (Thickness of Outer sheath ) |
500.0 |
|
| 5.2 (d) (Thickness of insulation minimum ) |
500.0 |
|
| 5.2 (d) (Thickness of insulation minimum ) |
500.0 |
|
| 5.2 (c) (closeness of armour tape) |
500.0 |
|
| 5.2 (c) (Resistivity test.) |
100.0 |
|
| 5.2 (c) (Torsion test) |
1000.0 |
|
| 5.2 (c) (Dimensions of Armour Wires) |
1000.0 |
|
| 5.2 (b) (Conductor resistance ) |
1000.0 |
|
| 5.2 (a) (Dimensions) |
1000.0 |
|
| 4.4 (Marking) |
1000.0 |
|
| 4.3 (Marking) |
100.0 |
|
| 4.1 (Marking) |
100.0 |
|
| 3.6.1 (OUTER SHEATH) |
100.0 |
|
| 3.5.5 (Armouring) |
100.0 |
|
| 3.5.2 (Armouring (Applicable for Signalling Cable only) |
100.0 |
|
| 3.5.2 (Armouring (Applicable for power cable only)) |
100.0 |
|
| 3.5.1 (Armouring) |
100.0 |
|
| 3.4.2 (Inner Sheath) |
100.0 |
|
| 3.4.1 (Inner Sheath) |
100.0 |
|
| 3.3.1 (LAYING UP (for Signalling Cable only)) |
100.0 |
|
| 3.3.1 (LAYING UP (for power cable only)) |
100.0 |
|
| 3.2.6 (Core identification) |
100.0 |
|
| 3.2.5 (Core identification) |
100.0 |
|
| 3.2.4 (Insulation ) |
100.0 |
|
| 3.2.3 (Insulation ) |
250.0 |
|
| 3.2.1 (Insulation ) |
100.0 |
|
| 3.1 (Conductor) |
100.0 |
|
| 3.1 (Conductor) |
100.0 |
|
|
| 3999 |
National Test House (NWR), Jaipur
| IS 398 : Part 1 (1996) - Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision) |
Aluminium conductors for overhead transmission purposes - Specification: Part 1 aluminium stranded conductors (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 4000 |
National Test House (WR), Mumbai
| IS 10500 (2012) - Drinking Water - Specification (Second Revision) |
Drinking Water - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Total Chromium (as Cr) - IS 3025 (Part 52) : 2003) |
500.0 |
|
| 4 (Total Arsenic (as As) - IS 3025 (Part 37): 2022) |
500.0 |
|
| 4 (Nickel (as Ni) - IS 3025 (Part 54):2003) |
500.0 |
|
| 4 (Molybdenum (as Mo)) |
500.0 |
|
| 4 (Mercury (as Hg) - IS 3025 (Part 48) : 1994) |
500.0 |
|
| 4 (Lead (as Pb) - IS 3025 (Part 47) : 1994) |
500.0 |
|
| 4 (Cadmium (as Cd) - IS 3025 (Part 41) : 2022) |
500.0 |
|
| 4 (Zinc (as Zn) - IS 3025 (Part 49): 1994) |
500.0 |
|
| 4 (Total Hardness (as CaCO3) - IS 3025 (Part 21) : 2009) |
500.0 |
|
| 4 (Total alkalinity as Calcium carbonate - IS 3025 (Part 23): 2023) |
400.0 |
|
| 4 (Sulphide (as H2S) - IS 3025 (Part 29) : 2022, Clause 7) |
300.0 |
|
| 4 (Sulphate (as SO4) - IS 3025 (Part 75) : 2022) |
500.0 |
|
| 4 (Silver (as Ag) - Annex J of IS 13428 : 2005) |
500.0 |
|
| 4 (Selenium (as Se) - IS 3025 (Part 56): 2003) |
500.0 |
|
| 4 (Mineral Oil - IS 3025 (Part 39): 2021, Clause 6) |
500.0 |
|
| 4 (Manganese (as Mn) - IS 3025 (Part 59): 2006) |
500.0 |
|
| 4 (Magnesium (as Mg) - IS 3025 (Part 46): 1994) |
500.0 |
|
| 4 (Iron (as Fe) - IS 3025 (Part 53) :2003, Clause 7) |
500.0 |
|
| 4 (Fluoride (as F) - IS 3025 (Part 75) : 2022) |
500.0 |
|
| 4 (Copper (as Cu) - IS 3025 (Part 42): 1992) |
500.0 |
|
| 4 (Chloride (as Cl) - IS 3025 (Part 32): 1988, Clause 2/IS 3025 (Part 75) : 2022) |
500.0 |
|
| 4 (Calcium (as Ca) - IS 3025 (Part 40) : 1991, Clause 5) |
500.0 |
|
| 4 (Boron (as B) - IS 3025 (Part 57): 2005) |
500.0 |
|
| 4 (Barium (as Ba) - Annex F of IS 13428 : 2005) |
500.0 |
|
| 4 (Aluminium (as Al) - IS 3025 (Part 55): 2003) |
500.0 |
|
| 4 (Total Dissolved Solids - IS 3025 (Part 16) : 2023) |
500.0 |
|
| 4 (Turbidity - IS 3025 (Part 10) : 2023) |
200.0 |
|
| 4 (Taste - IS 3025 (Part 8) : 2023)) |
200.0 |
|
| 4 (pH value- IS 3025 (Part 11) : 2022) |
300.0 |
|
| 4 (Odour - IS 3025 (Part 5) : 2018) |
300.0 |
|
| 4 (Colour - IS 3025 (Part 4): 2021, Clause 4) |
200.0 |
|
|
| 4001 |
National Test House (WR), Mumbai
| IS 5410 (2013) - Cement paint - Specification (Second Revision) |
Cement paint - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.8 ix (Recoating properties) |
1200.0 |
|
| 4.8 viii (Pot life of mixed paint) |
1200.0 |
|
| 4.8 vii (Water repellency) |
1200.0 |
|
| 4.8 vi (Resistance to dry rubbing) |
1200.0 |
|
| 4.8 v (Residue on sieve % by mass) |
1200.0 |
|
| 4.8 iv (Fastness to light
(250hrs)) |
12500.0 |
|
| 4.8iii (Colour) |
1200.0 |
|
| 4.8 ii (Finish) |
1200.0 |
|
| 4.8 i (Drying time Hard dry) |
1200.0 |
|
| 4.7 (Keeping properties) |
5000.0 |
|
| 4.6 (Durability Normal Out Door exposure Test 18 Months) |
15000.0 |
|
| Cl 4.4 (Lead Restriction) |
1200.0 |
|
| Cl 4.1 (Composition) |
3500.0 |
|
| IS 5410 Cement Paint (Coverage) |
1200.0 |
|
| VOC (Volatile Organic Compound, (VOC)) |
4000.0 |
|
| CEMENT PAINT — SPECIFICATION (Toxic metals such as lead, cadmium, chromium (VI) by atomic absorption spectrophotometric methods.) |
3600.0 |
|
|
| 4002 |
National Test House (WR), Mumbai
| IS 428 (2013) - Washable distemper - Specification (Third Revision) |
Washable distemper - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.7 ix (ix)Acc storage stability) |
1500.0 |
|
| 6.7 viii (viii) Resistance to alkali) |
1000.0 |
|
| 6.7 Vii (vii) Recoating properties) |
1000.0 |
|
| 6.7 Vi (vi) Residue on sieve % by mass) |
200.0 |
|
| 6.7 v (v) Fastness to light 250 hrs) |
12500.0 |
|
| 6.7 iv (iv) Colour) |
500.0 |
|
| 6.7 iii (iii)Finish) |
500.0 |
|
| 6.7 ii (ii) Consistency) |
1000.0 |
|
| 6.7 i. (b) (Drying time b) Hard dry) |
1500.0 |
|
| 6.7 i. (a) (Drying time a) surface dry) |
1500.0 |
|
| 6.6 (Keeping properties) |
5000.0 |
|
| 6.5 (Lead Restriction) |
500.0 |
|
| 6.3 (Application) |
500.0 |
|
| 6.2 (Thinning) |
100.0 |
|
| 6.1 (Form and condition) |
500.0 |
|
|
| 4003 |
National Test House (WR), Mumbai
| IS 427 (2013) - Distemper, dry, colour as required - Specification (Third Revision) |
Distemper, dry, colour as required - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.3 (Lead Restriction) |
500.0 |
|
| 4.2.2.ix (Resistance to dry rubbing
IS 427 Annex F) |
100.0 |
|
| 4.2.2.viii (Resistance to Alkali
IS 427 Annex E) |
100.0 |
|
| 4.2.2vii (Recoating properties
IS 427 Annex D) |
100.0 |
|
| 4.2.2.vi (Residue on sieve
IS 427 Annex C) |
100.0 |
|
| 4.2.2.v (Fastness to light
250 Hours Exposure Xenon arc Appartaus) |
5000.0 |
|
| 4.2.2.iv (colour
IS 101 (Part 4 /Sec 2)) |
100.0 |
|
| 4.2.2.iii (Finish
IS 101 (Part 3/Sec 4)) |
100.0 |
|
| 4.2.2.ii (consistency
IS 101 (Part 1/ Sec 5)) |
100.0 |
|
| 4.2.2 i (Drying Time Hard Dry) |
200.0 |
|
| 4.1 (Form and Condtion) |
100.0 |
|
|
| 4004 |
National Test House (ER), Kolkata
| IS 9974 : Part 1 (1981) - Specification for high pressure sodium vapour lamps: Part 1 general requirements and tests |
Specification for high pressure sodium vapour lamps: Part 1 general requirements and tests |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Lamp Dimensions ) |
5000.0 |
|
| 5 (Marking) |
5000.0 |
|
| 6 (Lamp Caps ) |
5000.0 |
|
| 7.2 (Lamp Starting & Warm-up Test ) |
5000.0 |
|
| 7.3 (Electrical characteristics) |
10000.0 |
|
| 7.4 (Lamp Photometric characteristics) |
15000.0 |
|
|
| 4005 |
National Test House (ER), Kolkata
| IS 15885 : Part 2 : Sec 13 (2012) - Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules |
Safety of lamp controlgear: Part 2 particular requirements: Sec 13 d.c. or a.c. supplied electronic controlgear for led modules |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7 (Marking) |
1200.0 |
|
| 8 (Protection against accidental contact with live parts ) |
1200.0 |
|
| 9 (Terminals) |
1200.0 |
|
| 10 (Provisions for protective earthing ) |
1200.0 |
|
| 11 (Moisture resistance & Insulation Resistance) |
3500.0 |
|
| 12 (Electric strength) |
1500.0 |
|
| 13 (Thermal endurance test for windings of
ballasts ) |
5500.0 |
|
| 14 (Fault conditions) |
2000.0 |
|
| 15 (Transformer heating) |
2000.0 |
|
| 16 (Construction ) |
1200.0 |
|
| 17 (Creepage distances and clearances ) |
1200.0 |
|
| 18 (Screws, current-carrying parts and
connections ) |
1200.0 |
|
| 19 (Resistance to Heat) |
2000.0 |
|
| 19 (Resistance to Fire) |
5000.0 |
|
| 19 (Resistance to Tracking) |
5000.0 |
|
| 20 (Resistance to corrosion) |
2000.0 |
|
|
| 4006 |
National Test House (ER), Kolkata
| IS 16104 (2012) - D.C. or A.C. supplied electronic control gear for led modules - Performance requirements |
D.C. or A.C. supplied electronic control gear for led modules - Performance requirements |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (Marking ) |
1200.0 |
|
| 7 (Output Voltage and Current) |
1200.0 |
|
| 8 (Total Circuit Power) |
2000.0 |
|
| 9 (Circuit Power Factor) |
1200.0 |
|
| 10 (Supply Current) |
1200.0 |
|
| 12 (Operational Test for abnormal condition) |
5000.0 |
|
| 13 (Temperature Cyclic Test) |
10000.0 |
|
| 13 (Supply voltage Switching Test (upto 200 cycle) ) |
5000.0 |
|
| 13 (Accelerated Operational Life Test upto 200 hrs.) |
5000.0 |
|
|
| 4007 |
National Test House (SR), Chennai
| IS/ISO 22702 (2003) - Uitility lighters - General consumer - Safety requirements |
Uitility lighters - General consumer - Safety requirements |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.1 (Flame generation) |
- |
|
| 3.2.2 (Flame height measurement: Non-adjustable postmixing burner utility lighters) |
900.0 |
|
| 3.2.3 (Flame height measurement: Non-adjustable pretmixing burner utility lighters) |
900.0 |
|
| 3.2.4 (Flame height measurement: Adjustable-flame-height postmixing burner utility lighters) |
900.0 |
|
| 3.2.5 (Flame height measurement: Adjustable-flame-height premixing burner utility lighters) |
900.0 |
|
| 3.2.6 (Flame height measurement: Adjustable-flame-height postmixing burner utility lighters (flame height on first ignition)) |
900.0 |
|
| 3.2.7 (Flame height measurement: Adjustable-flame-height premixing burner utility lighters (flame height on first ignition)) |
900.0 |
|
| 3.2.8 (Flame height measurement: Adjustable-flame-height postmixing burner utility lighters (flame height at lowest setting)) |
900.0 |
|
| 3.2.9 (Flame height measurement: Adjustable-flame-height premixing burner utility lighters (flame height at lowest setting) |
900.0 |
|
| 3.3 (Flame-height adjustment) |
- |
|
| 3.4 (Resistance to spitting or sputtering and flaring) |
1800.0 |
|
| 3.4 (Resistance to spitting or sputtering and flaring) |
1800.0 |
|
| 3.5.1 (Flame extinction: Adjustable postmixing burner utility lighters) |
1800.0 |
|
| 3.5.2 (Flame extinction: Adjustable and non-adjustable postmixing burner utility lighters) |
1800.0 |
|
| 3.5.3 (Flame extinction: Adjustable and non-adjustable premixing burner utility lighters) |
1800.0 |
|
| 3.6 (Volumetric displacement) |
1800.0 |
|
| 4.2 (Resistance to dropping) |
1800.0 |
|
| 4.3 (Resistance to elevated temperature) |
1800.0 |
|
| 4.4 (Burning behaviour) |
900.0 |
|
| 4.5 (Resistance to continuous burn) |
2000.0 |
|
| 4.6 (Resistance to cyclic burn) |
1800.0 |
|
| 4.7 (External finish) |
- |
|
| 4.8 (Compatibility with fuel) |
1800.0 |
|
| 4.9 (Resistance to internal pressure) |
1800.0 |
|
| 5.2 (Refilling of utility lighters) |
900.0 |
|
|
| 4008 |
National Test House (ER), Kolkata
| IS 16103 : Part 2 (2012) - Led modules for general lighting: Part 2 performance requirements |
Led modules for general lighting: Part 2 performance requirements |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Marking) |
1200.0 |
|
| 5 (Dimension) |
1200.0 |
|
| 7 (Power measurement) |
2000.0 |
|
| 8.1 (Luminous flux) |
5000.0 |
|
| 8.2 (Luminous intensity) |
5000.0 |
|
| 8.3 (Module efficacy) |
2000.0 |
|
| 9.1 (Chromaticity coordinates) |
1000.0 |
|
| 9.1 (corelated
colour temperature ) |
2000.0 |
|
| 9.2 (Colour rendering index (CRI) ) |
2000.0 |
|
| 10.2 (Lumen maintenance) |
30000.0 |
|
| 10.3 (Temperature Cyclic Test) |
10000.0 |
|
| 10.3 (Supply voltage Switching Test ) |
10000.0 |
|
|
| 4009 |
National Test House (ER), Kolkata
| IS 16103 : Part 1 (2012) - Led modules for general lighting: Part 1 safety requirements |
Led modules for general lighting: Part 1 safety requirements |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7 (Marking) |
1200.0 |
|
| 8 (Terminals) |
1200.0 |
|
| 9 (Provisions for protective earthing) |
1200.0 |
|
| 10 (Protection against accidental contact with live
parts ) |
1200.0 |
|
| 11 (Moisture resistance) |
2000.0 |
|
| 11 (Insulation Resistance) |
1500.0 |
|
| 12 (High Voltage Test) |
1500.0 |
|
| 13 (Fault conditions) |
2000.0 |
|
| 14 (Conformity testing during manufacture) |
5000.0 |
|
| 15 (Construction) |
1200.0 |
|
| 16 (Creepage distances ) |
600.0 |
|
| 16 (clearances ) |
600.0 |
|
| 17 (Screws, current-carrying parts and
connections) |
1200.0 |
|
| 18 (Ball Pressure Test) |
2000.0 |
|
| 18 (Glow Wire Test) |
5000.0 |
|
| 18 (Tracking Index Test) |
5000.0 |
|
| 19 (Resistance to Corrosion) |
5000.0 |
|
| 21 (Heat Management) |
2000.0 |
|
|
| 4010 |
National Test House (ER), Kolkata
| IS 16107 : Part 2 : Sec 1 (2012) - Luminaires performance: Part 2 particular requirements: Sec 1 led luminaire |
Luminaires performance: Part 2 particular requirements: Sec 1 led luminaire |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Qualitative) |
1200.0 |
|
| 7 (Luminaire power) |
2000.0 |
|
| 8.1 (Luminous flux ) |
2000.0 |
|
| 8.2 (Lighting intensity ) |
5000.0 |
|
| 8.3 (Angular beam distribution) |
1000.0 |
|
| 8.4 (Luminaire intensity distribution) |
2000.0 |
|
| 8.5 (Luminaire efficacy ) |
2000.0 |
|
| 9.1 (Chromaticity coordinates ) |
1000.0 |
|
| 9.1 (correlated
colour temperature ) |
2000.0 |
|
| 9.2 (Colour rendering index ) |
2000.0 |
|
| 10 (Life) |
30000.0 |
|
| 10.2 (Lumen maintenance ) |
30000.0 |
|
| 10.3 (Endurance test) |
55000.0 |
|
| 3.5 (TYPE TESTS FOR LUMINAIRES UP TO 200W INCLUDING LIFE TEST UP TO 1000 HRS) |
68000.0 |
|
| 10 (LED LUMINAIRE LIFE TEST UP TO 6000 HRS.) |
25000.0 |
|
| 8 (LIGHT OUTPUT FOR FOUR ADDITIONAL MEASUREMENTS (R/G/B & RGBW)) |
40000.0 |
|
| 9 (CHROMATICITY COORDINATES, CORRELATED COLOUR TEMPERATURE AND COLOUR RENDERING FOR FOUR ADDITIONAL MEASUREMENTS (R/G/B & RGBW)) |
20000.0 |
|
|
| 4011 |
National Test House (ER), Kolkata
| IS 10322 : Part 5 : Sec 4 (1987) - Specification for luminaires: Part 5 particular requirements: Sec 4 portable general purpose luminaires |
Specification for luminaires: Part 5 particular requirements: Sec 4 portable general purpose luminaires |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 13.2 (Visual Examination) |
1200.0 |
|
| 13.3 (Mechanical Strength Test) |
1200.0 |
|
| 13.4 (Endurance Test & Thermal Tests) |
5500.0 |
|
| 13.5 (Resistance to Dust) |
6000.0 |
|
| 13.5 (Resistance to Moisture) |
6000.0 |
|
| 13.6 (Insulation Resistance) |
2000.0 |
|
| 13.6 (Electric Strength) |
3000.0 |
|
| 18 (Resistance to heat
) |
2000.0 |
|
| 18 (Resistance to fire
) |
5000.0 |
|
| 18 (Resistance to tracking
) |
5000.0 |
|
|
| 4012 |
National Test House (ER), Kolkata
| IS 10322 : PART 5 : SEC 3 (2012) - Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision) |
Luminaires: Part 5 particular requirements: Sec 3 luminaires for road and street lighting (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (Marking ) |
1200.0 |
|
| 7 (Construction) |
1200.0 |
|
| 8 (Creepage Distances ) |
600.0 |
|
| 8 (Clearances) |
600.0 |
|
| 9 (Provision for earthing) |
1200.0 |
|
| 10 (Terminals) |
1200.0 |
|
| 11 (External & Internal wiring) |
1200.0 |
|
| 12 (Protection against Electric Shock) |
1200.0 |
|
| 13 (Endurance Test & Thermal Tests) |
5500.0 |
|
| 14 (Resistance to Dust ) |
6000.0 |
|
| 14 (Resistance to Moisture) |
6000.0 |
|
| 15 (Insulation Resistance ) |
2000.0 |
|
| 15 ( Electric Strength) |
3000.0 |
|
| 18 (Resistance to heat
) |
2000.0 |
|
| 18 (Resistance to fire
) |
5000.0 |
|
| 18 (Resistance to tracking
) |
5000.0 |
|
| 17 (Photometric Tests) |
10000.0 |
|
| 1 (Type Test) |
40000.0 |
|
|
| 4013 |
National Test House (ER), Kolkata
| IS 10322 : Part 5 : Sec 2 (2012) - Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision) |
Luminaires: Part 5 particular requirements: Sec 2 recessed luminaires (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (Marking ) |
1200.0 |
|
| 7 (Construction) |
1200.0 |
|
| 8 (Creepage Distances & Clearances) |
1200.0 |
|
| 9 (Provision for earthing) |
1200.0 |
|
| 10 (Terminals) |
1200.0 |
|
| 11 (External & Internal wiring) |
1200.0 |
|
| 12 (Protection against Electric Shock) |
1200.0 |
|
| 13 (Endurance Test & Thermal Tests) |
5500.0 |
|
| 14 (Resistance to Dust ) |
6000.0 |
|
| 14 (Resistance to Moisture) |
6000.0 |
|
| 15 (Insulation Resistance ) |
2000.0 |
|
| 15 ( Electric Strength) |
3000.0 |
|
| 18 (Resistance to heat
) |
2000.0 |
|
| 18 (Resistance to fire
) |
5000.0 |
|
| 18 (Resistance to tracking
) |
5000.0 |
|
| 17 (Photometric Tests) |
10000.0 |
|
| 6 (Marking ) |
1200.0 |
|
| 7 (Construction) |
1200.0 |
|
| 8 (Creepage Distances & Clearances) |
1200.0 |
|
| 9 (Provision for earthing) |
1200.0 |
|
| 10 (Terminals) |
1200.0 |
|
| 11 (External & Internal wiring) |
1200.0 |
|
| 12 (Protection against Electric Shock) |
1200.0 |
|
| 13 (Endurance Test & Thermal Tests) |
5500.0 |
|
| 14 (Resistance to Dust ) |
6000.0 |
|
| 14 (Resistance to Moisture) |
6000.0 |
|
| 15 (Insulation Resistance ) |
2000.0 |
|
| 15 ( Electric Strength) |
3000.0 |
|
| 18 (Resistance to heat
) |
2000.0 |
|
| 18 (Resistance to fire
) |
5000.0 |
|
| 18 (Resistance to tracking
) |
5000.0 |
|
| 17 (Photometric Tests) |
10000.0 |
|
|
| 4014 |
National Test House (ER), Kolkata
| IS 210 (2009) - Grey iron castings - Specification (First Revision) |
Grey iron castings - Specification (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 16 (Brinell Hardness) |
2000.0 |
|
| 15 (Tensile Strength) |
2500.0 |
|
| 6 (Chemical Composition (Sulphur)) |
500.0 |
|
| 6 (Chemical Composition (Phosphorus)) |
1000.0 |
|
| 9 (Microstructure) |
3000.0 |
|
|
| 4015 |
National Test House (ER), Kolkata
| IS 10322 : Part 5 : Sec 1 (2012) - Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision) |
Luminaires: Part 5 particular requirements: Sec 1 fixed general purpose luminaires (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (Marking ) |
1200.0 |
|
| 7 (Construction) |
1200.0 |
|
| 8 (Creepage Distances & Clearances) |
1200.0 |
|
| 9 (Provision for earthing) |
1200.0 |
|
| 10 (Terminals) |
1200.0 |
|
| 11 (External & Internal wiring) |
1200.0 |
|
| 12 (Protection against Electric Shock) |
1200.0 |
|
| 13 (Endurance Test & Thermal Tests) |
5500.0 |
|
| 14 (Resistance to Dust ) |
6000.0 |
|
| 14 (Resistance to Moisture) |
6000.0 |
|
| 15 (Insulation Resistance ) |
2000.0 |
|
| 15 ( Electric Strength) |
3000.0 |
|
| 18 (Resistance to heat
) |
2000.0 |
|
| 18 (Resistance to fire
) |
5000.0 |
|
| 18 (Resistance to tracking
) |
5000.0 |
|
| 17 (Photometric Tests) |
10000.0 |
|
| 6 to 17 (Complete test) |
40000.0 |
|
|
| 4016 |
National Test House (ER), Kolkata
| IS 10322 : Part 1 (2014) - Luminaires: Part 1 general requirements and tests (First Revision) |
Luminaires: Part 1 general requirements and tests (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3 (Marking ) |
1200.0 |
|
| 4 (Construction) |
1200.0 |
|
| 5 (External & Internal Wiring) |
1200.0 |
|
| 7 (Provision for Earthing) |
1200.0 |
|
| 8 (Protection against Electric Shock) |
1200.0 |
|
| 9 (Ingress Protection 1st Characterictics) |
6000.0 |
|
| 9 (Ingress Protection 2nd Characterictics) |
6000.0 |
|
| 10 (Insulation Resistance) |
2000.0 |
|
| 10 ( electric strength ) |
3000.0 |
|
| 11 (Creepage Distance ) |
600.0 |
|
| 11 (Clearance) |
600.0 |
|
| 12 (Endurance Test and Thermal Test) |
5500.0 |
|
| 13 (Resistance to heat
) |
2000.0 |
|
| 13 (Resistance to fire
) |
5000.0 |
|
| 13 (Resistance to tracking
) |
5000.0 |
|
| 14 (Screw Terminals) |
1200.0 |
|
| 15 (Screwless Terminals & Electrical connections) |
1200.0 |
|
|
| 4017 |
National Test House (ER), Kolkata
| IS 2339 (2013) - Aluminium paints for general purposes - Specification (First Revision) |
Aluminium paints for general purposes - Specification (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.1 (Compostion) |
200.0 |
|
| 5.1.1 (Leafing Value) |
1500.0 |
|
| 5.3 i (Drying Time Hard dry) |
200.0 |
|
| 5.3 ii (Consistency) |
200.0 |
|
| 5.3 iii (Finish) |
200.0 |
|
| 5.3 iv (Mass) |
200.0 |
|
| 5.3 v (Wet Opacity) |
500.0 |
|
| 5.3 vi (Flexibility and adhesion, bend test usingType 1 apparatus and 6.25 mm dia Mandrel) |
200.0 |
|
| 5.3 vii (Resistance to humidity under condition of condensation) |
3000.0 |
|
| 5.3viii (Flash point) |
2000.0 |
|
| 5.3 ix (Keeping properties) |
5000.0 |
|
| 5.2 (Lead Restriction) |
500.0 |
|
|
| 4018 |
National Test House (ER), Kolkata
| IS 15489 (2013) - Paint, plastic emulsion - Specification (First Revision) |
Paint, plastic emulsion - Specification (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.12 (Toxic metals such
as lead, cadmium, chromium (VI)) |
3600.0 |
|
| 6.12 (Volatile organic compounds,) |
2000.0 |
|
| 6.1 (Keeping properties) |
5000.0 |
|
| 6.5 (Mass in kg/10 litre (IS 101 (Part 1/Sec 7))) |
500.0 |
|
| 6.11 (Recoating properties, (Annexure J of IS 15489:2013)) |
2000.0 |
|
| 6.11 (Washability and cleanability (Annexure G of IS 15489:2013)) |
1900.0 |
|
| 6.11 (Resistance to alkali (Annexure F of IS 15489:2013)) |
500.0 |
|
| 6.11 (Accelerated storage stability test (Annexure H of IS 15489:2013)) |
700.0 |
|
| 6.11 (Colour (Annexure E of IS 15489:2013)) |
100.0 |
|
| 6.11 (Gloss at 60 degree d) Class D, (IS 101 (Part 4/Sec 4))) |
200.0 |
|
| 6.11 (Gloss at 60 degree c) Class C, (IS 101 (Part 4/Sec 4))) |
200.0 |
|
| 6.11 (Gloss at 60 degree b) Class B, (IS 101 (Part 4/Sec 4))) |
200.0 |
|
| 6.11 (Gloss at 60 degree a) Class A (IS 101 (Part 4/Sec 4))) |
200.0 |
|
| 6.11 (Finish (Annexure D of IS 15489:2013)) |
1200.0 |
|
| 6.11 (Consistency (Annexure B of IS 15489:2013)) |
1200.0 |
|
| 6.11 (Drying time a) Hard dry (Class C and D) (Annexure D of IS 15489:2013)) |
200.0 |
|
| 6.11 (Drying time a) Hard dry (Class A and B) (Annexure D of IS 15489:2013)) |
1200.0 |
|
| 6.11 (Drying time a) Surface dry (Class C and D) (Annexure D of IS 15489:2013)) |
1200.0 |
|
| 6.11 (Drying time a) Surface dry (Class A and B)) |
1000.0 |
|
| 6.9 (Lead Restriction) |
1000.0 |
|
| 6.8 (Durability Test for Exterior Use Only
Accelerated weathering apparatus QUV ( for 21 days)) |
15200.0 |
|
| 6.7 & 6.11 (Fastness to Light (Xenon Arc apparatus for 500 hrs)
(IS 101 Part 4/ Sec 3)) |
15000.0 |
|
| 6.6 (Opacity (IS 101 ( Part 1/Sec 3))) |
1000.0 |
|
| 6.2 (Conditions in the Container) |
200.0 |
|
| 6.3 (Thinning) |
1000.0 |
|
| 6.4 (Application Properties) |
700.0 |
|
| 6.1 (Composition) |
200.0 |
|
|
| 4019 |
National Test House (ER), Kolkata
| IS 10322 : Part 5 : Sec 5 (2013) - Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision) |
Luminaires: Part 5 particular requirements: Sec 5 floodlights (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (Marking ) |
1200.0 |
|
| 6 (Construction) |
1200.0 |
|
| 6 (Creepage Distances ) |
600.0 |
|
| 6 (Clearances) |
600.0 |
|
| 6 (Provision for earthing) |
1200.0 |
|
| 6 (Terminals) |
1200.0 |
|
| 6 (External & Internal wiring) |
1200.0 |
|
| 6 (Protection against Electric Shock) |
1200.0 |
|
| 6 (Endurance Test & Thermal Tests) |
5500.0 |
|
| 6 (Resistance to Dust) |
6000.0 |
|
| 6 (Resistance to Moisture) |
6000.0 |
|
| 6 (Insulation Resistance ) |
2000.0 |
|
| 6 ( Electric Strength) |
3000.0 |
|
| 6 (Resistance to heat
) |
2000.0 |
|
| 6 (Resistance to fire
) |
5000.0 |
|
| 6 (Resistance to tracking
) |
5000.0 |
|
| 6 (Photometric Tests) |
10000.0 |
|
| 6 to 17 (Type Test as per IS: 10322 (part 5/Sec.5) - 2013) |
40000.0 |
|
|
| 4020 |
National Test House (ER), Kolkata
| IS 16102 : Part 2 (2017) - Self - Ballasted led lamps for general lighting services: Part 2 performance requirements (First Revision) |
Self - Ballasted led lamps for general lighting services: Part 2 performance requirements (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Marking) |
- |
|
| 6 (Dimension) |
- |
|
| 8.1 (Power (Wattage)) |
2500.0 |
|
| 9.1 (Luminous flux) |
2500.0 |
|
| 9.2.4 (Peak Intensity) |
3000.0 |
|
| 9.2.5 (Beam angle) |
3000.0 |
|
| 10 (Colour chromaticity (cL. 10.1)and Colour rendering index (CRI) (Cl. 10.2)) |
5000.0 |
|
| 11 (Luminious Flux at 1000 Hrs, Luminous Flux at 6000 Hrs & Life, Hrs) |
17000.0 |
|
| 8.3 (Harmonics) |
2000.0 |
|
| 8.2 (Power factor) |
2500.0 |
|
| 9.3 (Luminous Efficacy (Lumen/watt)) |
2500.0 |
|
|
