NTH - Management Information System

Search by Standard No.

Reset

4408 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

4051

National Test House (WR), Mumbai

IS 73 (2013) - Paving bitumen - Specification (Fourth Revision)

Paving bitumen - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.2(vii)b (Ductility dg)	1200.0
6.2(vi) (Softening Point (R&B))	1200.0
6.2(v) (Solubility in TCE)	1200.0
6.2(iv) (Flash Point, cleveland Open cup)	1200.0
6.2 (i) (Penetration,25 dg 100g 5sec 0.1 mm)	1200.0

4052

National Test House (NWR), Jaipur

IS 1061 (2017) - Disinfectant fluids, phenolic type - Specification (Fifth Revision)

Disinfectant fluids, phenolic type - Specification (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

4053

National Test House (NWR), Jaipur

IS 13688 (2020) - Packaged Pasteurized Milk — Specification ( Second Revision )

Packaged Pasteurized Milk — Specification ( Second Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.3 (Salmonella sp.)	2000.0
8.3 (Listeria monocytogens)	2000.0
8.3 (Aerobic Plate Count)	2000.0
8.3 (Coliform count)	2000.0

4054

National Test House (NWR), Jaipur

IS 7463 (2004) - Wheat flour for use in bakery industry - Specification (Second Revision)

Wheat flour for use in bakery industry - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.3 (Granularity)	1000.0
3.3 (Alcoholic acidity (on dry basis))	1000.0
3.3 (Gluten (On dry basis))	1000.0
3.3 (Acid insoluble ash (on dry basis))	1000.0
3.3 (Total ash (on dry basis))	1000.0
3.3 (Moisture)	1000.0
3.3 (Total Bacterial Count)	2000.0
3.3 (Coliform Bacterial Count)	2000.0
3.3 (E-coli)	2000.0
3.3 (Yeast / Mould)	2000.0
3.3 (Rope Spore Count)	2000.0

4055

National Test House (WR), Mumbai

IS 133 : Part 1 (2013) - Enamel, interior: (A) undercoating (B) finishing - Specification: Part 1 for household and decorative purposes (Fifth Revision)

Enamel, interior: (A) undercoating (B) finishing - Specification: Part 1 for household and decorative purposes (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.9, xiv (Keeping properties)	5000.0
5.9, viii (Fasteness to light)	5000.0
5.9,xiii (Accelerated storage stability test)	2000.0
5.9,xii (Volume solids percent)	1200.0
5.9,xi (Flash point)	1200.0
5.9,x,b (Flexibility and adhesion:Bend test with 6.25 mm dia Mandre in type 1 apparatus.)	1200.0
5.9,x,a (Flexibility and adhesion: Scratch hardness (Load 1 000 g), )	1200.0
5.9,ix (Resistance to water)	1200.0
5.9,vii (Wet opacity)	1200.0
5.9,vi (colour)	1200.0
5.9,v (Fineness of grind, microns)	1200.0
5.9, iv,b (Gloss, 60º)	1200.0
5.9,iv,a (Finish)	1200.0
5.9,iii b ( Viscosity by B 4 ford cup)	1200.0
5.9,ii (Mass, kg/10litre)	1200.0
5.9.i c (Drying time : Tack free)	1200.0
5.9.i b (Drying time : Hard dry)	1200.0
5.9.i a (Drying time : Surface dry)	1200.0
5.8 (Lead Restrictions)	2500.0
5.7 (Freedom from Yellowing)	1200.0
5.6 (Thinning Properties)	1200.0
5.5 (Skin formation)	1200.0
5.4 (Freedom from Coarse Particles)	1200.0
5.3 (Condtion in container)	1200.0
5.2 (Total Non-volatile content)	1200.0

4056

National Test House (WR), Mumbai

IS 2339 (2013) - Aluminium paints for general purposes - Specification (First Revision)

Aluminium paints for general purposes - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.3 ix (Keeping properties)	5000.0
5.3viii (Flash point)	2000.0
5.3 vii (Resistance to humidity under condition of condensation)	3000.0
5.3 vi (Flexibility and adhesion, bend test usingType 1 apparatus and 6.25 mm dia Mandrel)	200.0
5.3 v (Wet Opacity)	500.0
5.3 iv (Mass)	200.0
5.3 iii (Finish)	200.0
5.3 ii (Consistency)	200.0
5.3 i (Drying Time Hard dry)	200.0
5.2 (Lead Resistrction)	500.0
5.1.1 (Leafing Value)	1500.0
5.1 (Compostion)	200.0

4057

National Test House (WR), Mumbai

IS 15489 (2013) - Paint, plastic emulsion - Specification (First Revision)

Paint, plastic emulsion - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.12 (Toxic metals such as lead, cadmium, chromium (VI))	3600.0
6.12 (Volatile organic compounds,)	2000.0
6.1 (Keeping properties)	5000.0
6.5 (Mass in kg/10 litre (IS 101 (Part 1/Sec 7)))	500.0
6.11 (Recoating properties, (Annexure J of IS 15489:2013))	2000.0
6.11 (Washability and cleanability (Annexure G of IS 15489:2013))	1900.0
6.11 (Resistance to alkali (Annexure F of IS 15489:2013))	500.0
6.11 (Accelerated storage stability test (Annexure H of IS 15489:2013))	700.0
6.11 (Colour (Annexure E of IS 15489:2013))	100.0
6.11 (Gloss at 60 degree d) Class D, (IS 101 (Part 4/Sec 4)))	200.0
6.11 (Gloss at 60 degree c) Class C, (IS 101 (Part 4/Sec 4)))	200.0
6.11 (Gloss at 60 degree b) Class B, (IS 101 (Part 4/Sec 4)))	200.0
6.11 (Gloss at 60 degree a) Class A (IS 101 (Part 4/Sec 4)))	200.0
6.11 (Finish (Annexure D of IS 15489:2013))	1200.0
6.11 (Consistency (Annexure B of IS 15489:2013))	1200.0
6.11 (Drying time a) Hard dry (Class C and D) (Annexure D of IS 15489:2013))	200.0
6.11 (Drying time a) Hard dry (Class A and B) (Annexure D of IS 15489:2013))	1200.0
6.11 (Drying time a) Surface dry (Class C and D) (Annexure D of IS 15489:2013))	1200.0
6.11 (Drying time a) Surface dry (Class A and B) (Annexure D of IS 15489:2013))	1200.0
6.9 (Lead Restriction)	1000.0
6.8 (Durability Test for Exterior Use Only : Normal Outdoor exposure for 12 Months (Annexure C of IS 15489:2013))	12000.0
6.6 (Opacity (IS 101 ( Part 1/Sec 3)))	1000.0
6.2 (Conditions in the Container)	200.0
6.7 & 6.11 (Fastness to Light (Xenon Arc apparatus for 500 hrs) (IS 101 Part 4/ Sec 3))	15000.0
6.3 (Thinning)	1000.0
6.4 (Application Properties)	700.0
6.1 (Composition)	200.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Please refer annexure)	3600.0
Paint, plastic emulsion - Specification (First Revision) (Coverage)	1200.0
6.8 1. 2 (Accelerated weathering apparatus QUV ( for 21 days))	20000.0
Accelerated Weathering Tests (Accelerated Weathering Tests (UV condensation type), IS 101 (Part 6/Sec 5): 1997 for 1000 hr)	60000.0
Accelerated Weathering Tests (Accelerated Weathering Tests (UV condensation type), IS 101 (Part 6/Sec 5): 1997 for 1500 hr)	90000.0
Accelerated Weathering Tests (Accelerated Weathering Tests (UV condensation type), IS 101 (Part 6/Sec 5): 1997 for 2000 hr)	100000.0
Paint plastic emulsion (Pull off Adhesion (ASTM D 4541))	2000.0
Paint, plastic emulsion - Specification (First Revision) (Artificial Aging Resistance 500 hrs, ASTM G 154 (Cycle 2 - UVB 313, 4h UV at 60 (±3) °C and 4 h Condensation at 50 (±3) °C))	30000.0
Paint, plastic emulsion - Specification (First Revision) (Brushing Test (IS 101 (Part 1/Sec 4)))	2000.0
Paint, plastic emulsion - Specification (First Revision) (Water Resistance for 7 days (IS 101 (Part 7/Sec 1)))	1500.0
Paint, plastic emulsion - Specification (First Revision) (Toxic Element Mercury (Instrumental Method AAS))	1200.0
Paint, plastic emulsion - Specification (First Revision) (Free Formaldehyde (ASTM D 6191))	5000.0
Paint, plastic emulsion - Specification (First Revision) (Contrast Ratio (ASTM D 2805))	2000.0
Paint, plastic emulsion - Specification (First Revision) (Brightness index (ASTM D 2244))	2000.0
Paint, plastic emulsion - Specification (First Revision) (Whiteness Index (ASTM E 313))	2000.0
Paint, plastic emulsion - Specification (First Revision) (Opacity (Hiding power) - ASTM D 2805)	2000.0

4058

National Test House (SR), Chennai

IS 9730 (2008) - Non - Stick unreinforced plastics coatings on domestic cooking utensils - Specification (First Revision)

Non - Stick unreinforced plastics coatings on domestic cooking utensils - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (Visual Defects Test)	2000.0
7.3 (Non-Stick quality Test)	2000.0
7.4 (Salt-Water Corrosion)	2000.0
7.5.2 (Cross-hatch Test)	1000.0
7.5.3 (Peel Test)	1000.0

4059

National Test House (SR), Chennai

IS 1660 (2024) - Wrought aluminium utensils - Specification (Second Revision)

Wrought aluminium utensils - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Dimension, mm)	1000.0
8 (Workmanship & finish)	1000.0
7.2 (Test on Handle)	500.0
8.4.1.2 (Finish of the coating)	500.0
4 (Materials of Lid)	3500.0
4 (Materials of utensil)	3500.0
TDS-1 (Weight)	500.0
8.4.2 (Coating thickness test)	2500.0
8.4.3 (Abrasion resistance test)	500.0
8.4.5 (Hardness test)	500.0
8.5 (Non-Stick Unreinforced Plastics Coatings on Domestic Cooking Utensils)	8000.0
8.5 (Coating thickness test as per IS 9730)	2000.0
TDS-2 (Capacity , ml)	500.0

4060

National Test House (ER), Kolkata

ASME ASME (2021) - Performance test ( Plate & electrodes not supplied by NTH)

Performance test ( Plate & electrodes not supplied by NTH)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ASME (Welding procedure qualification)	11000.0
ASME (Welder qualification)	5000.0

4061

National Test House (ER), Kolkata

ASME ASME Section IX (2021) - Preparation of welding procedure specification (WPS) as per ASME Section IX

Preparation of welding procedure specification (WPS) as per ASME Section IX

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ASME Section IX (Welding procedure Specification)	10000.0

4062

National Test House (ER), Kolkata

ASME Section IX (2019) - 2019 Boiler and Pressure Vessel Code

2019 Boiler and Pressure Vessel Code

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
QW 191 (Radiography Test -Pipe)	3200.0
QW 191 (Radiography Test -Plate)	1200.0

4063

National Test House (ER), Kolkata

IS 16102 : Part 1 (2012) - Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

Self - Ballasted led lamps for general lighting services: Part 1 safety requirements

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Marking )	1200.0
6 (Interchangeability)	1200.0
7 (Protection against electric shock)	1200.0
8 (Insulation resistance )	2000.0
8 (Electric strength after humidity treatment)	3000.0
9 (Mechanical strength)	1200.0
10 (Cap temperature rise)	2000.0
11 (Resistance to heat)	2000.0
12 (Resistance to ignition)	5000.0
12 (Crepage distance)	600.0
14 ( clearances)	600.0

4064

National Test House (ER), Kolkata

IS 1182 (1983) - Recommended - Practice for radiographic examination of fusion welded butt joints in steel plates (Second Revision)

Recommended - Practice for radiographic examination of fusion welded butt joints in steel plates (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Clause 9.1 (Preparation of Weld assembly for Radiography test)	4000.0

4065

National Test House (SR), Chennai

IS 13395 (2021) - Performance of Handles and Handle Assemblies Attached to Cookware - Specification ( First Revision )

Performance of Handles and Handle Assemblies Attached to Cookware - Specification ( First Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Bending Strength)	1000.0
5.3 (Torque Strength)	1000.0
5.4 (Impact Strength)	1000.0
5.5 (Fatigue Resistance)	3000.0
5.6 (Leakage)	1000.0
5.7 (Thermal Insulation)	1000.0
5.8 (Heat Resistance)	2000.0
5.9 (Washing Resistance)	2000.0
5.10 (Burning Resistance)	1000.0

4066

National Test House (SR), Chennai

IS 133 : Part 1 (2013) - Enamel, interior: (A) undercoating (B) finishing - Specification: Part 1 for household and decorative purposes (Fifth Revision)

Enamel, interior: (A) undercoating (B) finishing - Specification: Part 1 for household and decorative purposes (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.9, viii (Fasteness to light)	5000.0
5.9,xiii (Accelerated storage stability test)	2000.0
5.9, xiv (Keeping properties)	5000.0
5.9,xii (Volume solids percent)	1200.0
5.9,xi (Flash point)	1200.0
5.9,x,b (Flexibility and adhesion:Bend test with 6.25 mm dia Mandre in type 1 apparatus.)	1200.0
5.9,x,a (Flexibility and adhesion: Scratch hardness (Load 1 000 g), )	1200.0
5.9,ix (Resistance to water)	1200.0
5.9,vii (Wet opacity)	1200.0
5.9,vi (colour)	1200.0
5.9,v (Fineness of grind, microns)	1200.0
5.9, iv,b (Gloss, 60º)	1200.0
5.9,iv,a (Finish)	1200.0
5.9,iii a ( Consistency )	1200.0
5.9,ii (Mass, kg/10litre)	1200.0
5.9.i c (Drying time : Tack free)	1200.0
5.9.i b (Drying time : Hard dry)	1200.0
5.9.i a (Drying time : Surface dry)	1200.0
5.8 (Lead Restrictions)	2500.0
5.7 (Freedom from Yellowing)	1200.0
5.9,iii b ( Viscosity by B 4 ford cup)	1200.0
5.6 (Thinning Properties)	1200.0
5.5 (Skin formation)	1200.0
5.4 (Freedom from Coarse Particles)	1200.0
5.2 (Total Non-volatile content)	1200.0
5.3 (Condtion in container)	1200.0

4067

National Test House (SR), Chennai

IS 319 (2007) - Free cutting brass bars, rods and section - Specification (Fifth Revision)

Free cutting brass bars, rods and section - Specification (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.1 (Copper)	1200.0
8.1 (Iron)	1200.0
8.1 (Lead)	1200.0
8.1 (Zinc)	1200.0
8.1 (Total other impurities (Excluding Iron))	500.0

4068

National Test House (SR), Chennai

IS 2347 (2023) - Domestic pressure cooker - Specification (Sixth Revision)

Domestic pressure cooker - Specification (Sixth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Capacity)	500.0
6.1.1 (Vent pipe inside diameter)	500.0
8.1 (Air Pressure of domestic pressure cooker)	1000.0
8.2 (Proof Pressure of domestic pressure cooker)	2000.0
8.3 (Operating pressure for Pressure Regulating Device)	1000.0
8.4.1 Annex-H cl. No. H-1.1 (Operating pressure of Safety Pressure Relief Device for destructible device)	1000.0
8.6.1 (Removal of Lid under Pressure (For Outer Lid Cooker))	1000.0
8.6.2 (Removal of Lid under Pressure (For Inner Lid Cooker))	1000.0
8.5 (Bursting Pressure Test)	3000.0
5.3 (Performance Test on Gasket)	1000.0
TDS 1 (Weight, kg.)	-
5.1 (Chemical Composition, % by mass.)	6000.0
TDS-2 (Overall Dimension- Thickness, mm.)	-
7.4 Annex-E cl. No. E-2 (Coating thickness for body)	2000.0
7.4 Annex-E cl. No. E-3 (Abrasion resistance for body)	500.0
7.4 Annex-E cl. No. E-4 (Micro Vickers Hardness for body)	2000.0
7.4 Annex-E cl. No. E-2 (Coating thickness for lid)	2000.0
7.4 Annex-E cl. No. E-3 (Abrasion resistance for lid)	500.0
7.4 Annex-E cl. No. E-4 (Micro Vickers Hardness for lid)	2000.0
5.4 (Performance test for pressure cooker handle as per IS 13395)	11000.0
8.4.1 Annex-H cl. No. H-1.2 (Operating pressure of Safety Pressure Relief Device for Gasket Release System.)	1000.0

4069

National Test House (SR), Chennai

IS 513 : Part 2 (2016) - Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision)

Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (Yield stress)	1000.0
7.1 (Tensile strength)	1000.0
7.1 (% Elongation)	1000.0
7.2 (Bend Test)	1000.0
7.3 (Tensile Strain Hardening Component (n-90))	3000.0
8.4.1 (Surface condition (Quality A))	500.0
8.4.2 (Surface condition (Quality B))	500.0
8.5 (Surface finish)	1000.0
10 (Thickness)	1000.0
6 (Chemical composition (Carbon))	625.0
6 (Chemical composition (Manganese))	625.0
6 (Chemical composition (Sulphur))	625.0
6 (Chemical composition (Phosphorus))	625.0
6 (Chemical composition (Aluminium))	208.0
6 (Chemical composition (Silicon))	208.0
6 (Chemical composition (Chromium))	208.0
6 (Chemical composition (Nickel))	208.0
6 (Chemical composition (Niobium))	208.0
6 (Chemical composition (Vanadium))	208.0
6 (Chemical composition (Titanium))	208.0
6 (Chemical composition (Molybdenum))	208.0
6 (Chemical composition (Boron))	208.0
6 (Chemical composition (Calcium))	208.0
6 (Chemical composition (Copper))	208.0

4070

National Test House (SR), Chennai

IS 4246 (2002) - Domestic gas stoves for use with liquefied petroleum gases - Specification (Fifth Revision)

Domestic gas stoves for use with liquefied petroleum gases - Specification (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Materials)	100.0
6 (Design for maintenance)	200.0
7 (Rigidity and Stability)	500.0
8 (Workmanship & Finish)	200.0
9 (Gas Taps)	500.0
10 (Injector Jets)	500.0
11 (Buners)	500.0
12 (Burner Pan Supports)	500.0
13 (Gas Soundness)	2000.0
14 (Gas Inlet Connection)	500.0
15 (Strength and Rigidity Test)	500.0
17 (Gas Consumption Test)	4000.0
18 (Ignition and Flame Travel Test)	2000.0
19 (Flame Stability Test)	500.0
20 (Noise Control Test)	500.0
21 (Flash Back Test)	2000.0
22 (Formation of Soot Test)	2000.0
23 (Resistance to Draught Test)	2000.0
25 (Fire Hazard and Limiting Temperature Test)	3000.0
26 (Thermal Efficiency Test)	4000.0
24 (Combustion)	4000.0
TDS-1 (Dimensions)	-
TDS-2 (Weight)	-

4071

National Test House (SR), Chennai

IS 16098 Part 1 (2013) - Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 1 Pipes and Fittings With Smooth External Surface, Type A

Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 1 Pipes and Fittings With Smooth External Surface, Type A

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.3 (Ring Flexibility)	1500.0
9.2 (Resistance to External Blows)	2000.0
9.1 (Ring Stiffness)	1500.0
8.3 (Effect of Heating (Stress Relief Test))	2000.0
8.2 (VST for Fittings)	1500.0
8.1 (Appearance and Color of Fittings)	1000.0
7.5 (Longitudinal Reversion)	2000.0
7.3 (Vicat Softening Temperature)	1500.0
7.2 (Colour)	1000.0
7.1 (Appearance)	1000.0
6.3.4.3 (Rotational Molding Fittings)	1000.0
6.3.4.2 (Fabricated Fitings)	1000.0
6.3.4.4 (Type of Fittings)	1000.0
6.3.4.1 (Wall Thickness of Sockets)	1000.0
6.3.3 (Length)	1000.0
6.3.2 (Wall Thickness)	1000.0
6.3.1 (Outside Dia)	1000.0

4072

National Test House (ER), Kolkata

IS 16106 (2012) - Method of electrical and photometric measurements of solid state lighting (LED) products

Method of electrical and photometric measurements of solid state lighting (LED) products

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Annex I (Illumination Data at different distance as per test method IS 16106:2012)	3000.0
Annex : II (IES File for Lighting parameters)	3000.0
16 (Verification of Battery Model and Rating with the customers Specification/GTP)	-
11 (Complete Electrical, Photometry & Colorimetry Tests up to 200W)	18000.0
11 (Complete Electrical, Photometry & Colorimetry Tests up to 300W)	21000.0
5 (Driver Input: Voltage, Current, Power & Power Factor, Driver Output: Voltage, Current, Power & Calculated Driver Efficiency)	5000.0
11, 12 & 13 (Photometric Measurements: Luminous Flux, Luminous Inttensity Distribution & Luminous Efficacy)	10000.0
14 (Colorimetric Measurements: Colour Rendering Index(CRI), Correlated Colour Temperature (CCT) & Colour Coordinates.)	10000.0

4073

National Test House (ER), Kolkata

IBR 1950 (2023) - Qualified Boiler Welder's Certificate

Qualified Boiler Welder's Certificate

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Chapter XIII (Certification of welder per position of welding on Plate (SMAW/FCAW) (Plate and Electrodes not supplied by NTH))	3000.0
Chapter XIII (Certification of welder on Pipe & Branch Pipe by TIG/GTAW)	9000.0
Chapter XIII (Certification of welder per position of welding on Pipe/Tube by MMAW)	4500.0
Chapter XIII (Certification of welder per position of welding on Pipe by TIG/GTAW)	4500.0
Chapter XIII (Certification of welder per position of welding on Tube by TIG/GTAW)	4500.0

4074

National Test House (ER), Kolkata

IS 7666 (1988) - Ultrasonic examination of ferritic castings of carbon and low alloy steel - Recommedned procedure (First Revision)

Ultrasonic examination of ferritic castings of carbon and low alloy steel - Recommedned procedure (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 7666 (Ultrasonic examination)	2000.0

4075

National Test House (ER), Kolkata

IS 8791 (1978) - Code of practice for ultrasonic flaw detection of ferritic steel forgings

Code of practice for ultrasonic flaw detection of ferritic steel forgings

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 8791 (Ultrasonic examination)	2000.0

4076

National Test House (ER), Kolkata

IS 4260 (2004) - Recommended practice for ultrasonic testing of butt welds in ferritic steel (Third Revision)

Recommended practice for ultrasonic testing of butt welds in ferritic steel (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 4260 (Ultrasonic examination)	2000.0

4077

National Test House (ER), Kolkata

IS 4225 (2004) - Recommended practice for straight beam ultrasonic testing of steel plates (Second Revision)

Recommended practice for straight beam ultrasonic testing of steel plates (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 4225 (Ultrasonic examination)	2000.0

4078

National Test House (ER), Kolkata

IS 12889 (1989) - Performance Evaluation Of Liquid Penetrants

Performance Evaluation Of Liquid Penetrants

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Annex A (Penetrant Removability Test)	2000.0
10 (System Sensitivity Performance)	10000.0
8 (Water Tolerance)	2000.0
5.4 (Viscosity)	2000.0
5.3 (Flash Point)	2000.0

4079

National Test House (SR), Chennai

IS 13592 (2013 (RA 2018)) - Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

Unplasticized Polyvinyl Chloride (PVC-U) Pipes for Soil and Waste Discharge System Inside and Outside Buiildings Including Ventilation and Rainwater System

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11 (Water tightness of joints)	5000.0
10.3 (Axial Shrinkage)	2000.0
10.2 (Tensile strength)	2000.0
10.1 (Impact Strength)	2000.0
9 (Resistance to Sulphuric Acid)	2000.0
8.5 (Effect of Sunlight)	3000.0
8.4 (Vicat Softening Temperature)	1500.0
8.3 (Stress relief test)	2000.0
8.2 (Reversion test)	2000.0
8.1 (Visual Appearance)	1000.0
7 (Dimensions (Outside Diameter, Wall thickness))	1000.0
7.1 (Outside diameter at any point)	1000.0
7.1 (Wall Thickness)	1000.0
10.1 (Resistance to External Blow at 0°C (Impact Test))	2000.0
Firm's Request (Density)	1000.0
Firm's Request (Fitment Test)	2000.0
Firm's Request (Flattening Test)	2000.0

4080

National Test House (ER), Kolkata

IS 2762 (2009) - Wire rope slings and sling legs - Specification (Second Revision)

Wire rope slings and sling legs - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.0 (Proof Load/Safe Working Load- 1 to 5 ton)	3000.0
9.0 (Proof Load/Safe Working Load- 6 to 9 ton)	6000.0
9.0 (Proof Load/Safe Working Load- 10 to 30 ton)	8000.0
9.0 (Proof Load/Safe Working Load- 31 to 99 ton)	10000.0
9.3 (Proof Load/Safe Working Load- 100 to 130 ton)	20000.0