| 3961 |
National Test House (SR), Chennai
| IS 2830 (2012) - Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision) |
Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (Phosphorus) |
500.0 |
|
| 6 (Sulphur) |
500.0 |
|
| 6 (Manganese) |
500.0 |
|
| 6 (Copper) |
500.0 |
|
| 6 (Carbon) |
500.0 |
|
|
| 3962 |
National Test House (SR), Chennai
| IS 3812 : Part 2 (2013) - Pulverized Fuel Ash - Part 2 : For Use as Admixture in Cement Mortar and Concrete |
Pulverized Fuel Ash - Part 2 : For Use as Admixture in Cement Mortar and Concrete |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 (Soundness by autoclave test — Expansion of specimen ) |
1500.0 |
|
| 7.1 (Particles retained on 45 micron IS sieve (wet sieving) ) |
1000.0 |
|
| 7.1 (Fineness — Specific surface by Blaine’s permeability method) |
1000.0 |
|
| 5.1 ,6.1 (Loss on ignition) |
500.0 |
|
| 5.1 ,6.1 (Total Chlorides) |
500.0 |
|
| 5.1 ,6.1 (Available alkali as equivalent sodium oxide (Na2O)) |
500.0 |
|
| 5.1 ,6.1 (Total Sulphur as sulphur trioxide(SO3)) |
500.0 |
|
| 5.1 ,6.1 (Magnesium oxide(MgO)) |
500.0 |
|
| 5.1 ,6.1 (Reactive Silica) |
500.0 |
|
| 5.1 ,6.1 (Silicon dioxide(SiO2)) |
500.0 |
|
| 5.1 ,6.1 (Silicon dioxide(SiO2) plus aluminium oxide (Al2O3) plus iron oxide (Fe2O3)) |
500.0 |
|
|
| 3963 |
National Test House (ER), Kolkata
| IS 814:2004 - Covered electrodes for manual metal arc welding of carbon and carbon manganese steel - Specification (Sixth Revision) |
Covered electrodes for manual metal arc welding of carbon and carbon manganese steel - Specification (Sixth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9.4 (Increased Metal Recovery Test-IS 13043) |
3000.0 |
|
| 9.5 (Diffusible Hydrogen Evaluation Test-IS 11802) |
5000.0 |
|
| 9.6 (Radiographic Test-IS 1182) |
1000.0 |
|
| 9.2 (Butt Weld Bend Test -IS 1599) |
8000.0 |
|
| 9.1.3 (Impact Strength-Annex F) |
3000.0 |
|
| 9.1.2 (Percentage Elongation on Gauge Length-Annex F) |
1000.0 |
|
| 9.1.2 (Yield Stress -Annex F) |
1000.0 |
|
| 9.1.2 (Ultimate Tensile Strength -Annex F) |
1000.0 |
|
| 9.1.1 (Preparation of Weld assembly) |
4000.0 |
|
| B7 (Coating Ratio) |
500.0 |
|
| 7.1.2 (Length of Electrode) |
500.0 |
|
| 7.1.1 (Diameter of Core Wire) |
500.0 |
|
| 7.3 (Concentricity of Flux Covering With Core Wire) |
250.0 |
|
| 7.2.2 (Arc striking End) |
500.0 |
|
| 7.2.1 (Contact End) |
500.0 |
|
| 8.2 (Combined limit for Mn+Ni+Cr+Mo+V) |
500.0 |
|
| 8.2 (Vanadium) |
500.0 |
|
| 8.2 (Molybdenum) |
500.0 |
|
| 8.2 (Chromium) |
500.0 |
|
| 8.2 (Nickel) |
500.0 |
|
| 8.2 (Phosphorus) |
500.0 |
|
| 8.2 (Sulphur) |
500.0 |
|
| 8.2 (Manganese) |
500.0 |
|
| 8.2 (Silicon) |
500.0 |
|
| 8.2 (Carbon) |
500.0 |
|
|
| 3964 |
National Test House (ER), Kolkata
| IS 2760 (1980) - Specification for steel chain slings (First Revision) |
Specification for steel chain slings (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 11 (Proof Load) |
3000.0 |
|
| 11 (Proof Load) |
6000.0 |
|
| 11 (Proof Load) |
8000.0 |
|
| 11 (Proof Load) |
10000.0 |
|
| 11 (Proof Load) |
20000.0 |
|
| 11 (Proof Load) |
20000.0 |
|
| 11 (Safe Working Load) |
3000.0 |
|
| 11 (Safe Working Load) |
6000.0 |
|
| 11 (Safe Working Load) |
8000.0 |
|
| 11 (Safe Working Load) |
10000.0 |
|
| 11 (Safe Working Load) |
20000.0 |
|
|
| 3965 |
National Test House (ER), Kolkata
| IS 15435 (2004) - Thickness gauging on metal products by ultrasonic method per sq. meter of surface area or fraction there of - 10 readings |
Thickness gauging on metal products by ultrasonic method per sq. meter of surface area or fraction there of - 10 readings |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IS 15435 (Thickness measurement) |
1000.0 |
|
|
| 3966 |
National Test House (SR), Chennai
| IS 383 (2016) - Coarse and Fine Aggregate for Concrete - Specification (Third Revision) [All Tests 2386] |
Coarse and Fine Aggregate for Concrete - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (IS:2386(Pt.-1)_Size and Grading of Aggregates-Sieve Analysis) |
2000.0 |
|
| 5.4.2 (IS:2386(Pt.-4)_Impact Value, %) |
1500.0 |
|
| 5.4.3 (IS:2386(Pt.-4)_Abrasion Value, %) |
1500.0 |
|
| 5.4.1 (IS:2386(Pt.-4)Crushing Value) |
1500.0 |
|
| 5.7 (Specific gravity) |
500.0 |
|
| 5.7 (Water absorption) |
1000.0 |
|
| 5.6 (Alkali aggregate reactivity, m.mol/lit.) |
3000.0 |
|
| 5.2 (Deleterious materials) |
2000.0 |
|
| 5.7 (Total alkali content as Na2O) |
1200.0 |
|
| 5.7 (Total sulphate content as SO3) |
1200.0 |
|
| 5.7 (Water soluble chloride content) |
1200.0 |
|
| custom (Micro fines content) |
1000.0 |
|
| custom (Test for Silt content(CPWD specification)) |
1000.0 |
|
| custom (Bulk density-loosely packed) |
500.0 |
|
| custom (Bulk density-compacted) |
500.0 |
|
| - (Bulking of sand) |
1000.0 |
|
| custom (Density) |
1000.0 |
|
| 5.4.1 (Fines value) |
1500.0 |
|
| 5.3 (Combined Elongation Index and Flakiness Index) |
3000.0 |
|
| Custom (Silica as SiO2) |
1000.0 |
|
| Custom (Alumina as Al2O3) |
1000.0 |
|
| Custom (Calcium as CaO) |
1000.0 |
|
| Custom (Magnesium as MgO) |
1000.0 |
|
| - - (Sulphur as SO3) |
1000.0 |
|
| - - (Water Soluble Chloride as Cl) |
1000.0 |
|
| Custom (Water soluble Sodium as Na2O) |
1000.0 |
|
| Custom (Water soluble Potassium as K2O) |
1000.0 |
|
| Custom (Iron as Fe2O3) |
1000.0 |
|
| 5.3 (IS:2386(Pt.-1)_Flakiness Index) |
1500.0 |
|
| 5.3 (IS:2386(Pt.-1)_Elongation Index) |
1500.0 |
|
| - (Organic impurities) |
1000.0 |
|
| 5.5 (IS 2386 (Part 5)_Soundness) |
2000.0 |
|
| Custom (Loss on Ignition) |
1000.0 |
|
| Custom (Sodium as Na2O) |
1000.0 |
|
| Custom (Potassium as K2O) |
1000.0 |
|
| Custom (Nitrogen as N) |
1000.0 |
|
|
| 3967 |
National Test House (SR), Chennai
| IS 12330 (1988) - Specificatioon for sulphate resisting Portland cement |
Specificatioon for sulphate resisting Portland cement |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.5 (Compressive strength,672±4 h) |
1000.0 |
|
| 5.5 (Compressive strength,168±2 h) |
1000.0 |
|
| 5.5 (Compressive strength,72±1 h) |
1000.0 |
|
| 5.3 (Setting time,Final) |
250.0 |
|
| 5.3 (Setting time Initial) |
250.0 |
|
| 5.2 (Soundness-autoclave method) |
1000.0 |
|
| 5.2 (Soundness-Lechatlier method) |
500.0 |
|
| 4.1 (Ratio of percentage of lime to percentages of silica, alumina and iron oxide) |
3000.0 |
|
| 4.1 (Insoluble residue) |
1000.0 |
|
| 4.1 (Magnesia) |
1000.0 |
|
| 4.1 (Total Sulphur content calculated as sulphuric anhydride (SO3)) |
1000.0 |
|
| 4.1 (Tricalcium aluminate (C3A)) |
2000.0 |
|
| 4.1 (Tetracalcium alumino ferrite phase plus twice the tricalcium aluminate (C4AF+2C3A)) |
2000.0 |
|
| 4.1 (Total Loss on ignition) |
1000.0 |
|
| - (Consistency(%):) |
500.0 |
|
| 5.4 (Sulphate expansion) |
1500.0 |
|
|
| 3968 |
National Test House (ER), Kolkata
| IS 3658 (1999) - Code of practice for liquid penetrant flaw detection (Second Revision) |
Code of practice for liquid penetrant flaw detection (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| A (Dye Penetrant Testing (At Three Location)) |
3000.0 |
|
| B (Dye Penetrant Test) |
1000.0 |
|
|
| 3969 |
National Test House (SR), Chennai
| IS 3812 (Part 1) (2013) - Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete |
Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 (Soundness by autoclave test — Expansion of specimen ) |
1500.0 |
|
| 7.1 (Compressive strength at 28 days ) |
3000.0 |
|
| 7.1 (Particles retained on 45 micron IS sieve (wet sieving) ) |
1000.0 |
|
| 7.1 (Fineness — Specific surface by Blaine’s permeability method) |
1000.0 |
|
| 7.1 ( Lime reactivity — Average compressive strength ) |
3000.0 |
|
| 5.1 ,6.1 (Loss on ignition) |
500.0 |
|
| 5.1 ,6.1 (Total Chlorides) |
500.0 |
|
| 5.1 ,6.1 (Available alkali as equivalent sodium oxide (Na2O)) |
500.0 |
|
| 5.1 ,6.1 (Total Sulphur as sulphur trioxide(SO3)) |
500.0 |
|
| 5.1 ,6.1 (Magnesium oxide(MgO)) |
500.0 |
|
| 5.1 ,6.1 (Reactive Silica) |
500.0 |
|
| 5.1 ,6.1 (Silicon dioxide(SiO2)) |
500.0 |
|
| 5.1 ,6.1 (Silicon dioxide(SiO2) plus aluminium oxide (Al2O3) plus iron oxide (Fe2O3)) |
500.0 |
|
|
| 3970 |
National Test House (ER), Kolkata
| IS 3703 (2004) - Recommended practice for magnetic particle flaw detection (Second Revision) |
Recommended practice for magnetic particle flaw detection (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IS 3703 (Magnetic Particle Testing) |
1000.0 |
|
|
| 3971 |
National Test House (ER), Kolkata
| IS 6012 (1992) - Measurement of coating thickness by eddy current method (First Revision) |
Measurement of coating thickness by eddy current method (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IS 6012 (Coating thickness) |
2000.0 |
|
|
| 3972 |
National Test House (ER), Kolkata
| IS 2180 (1988) - Specification for heavy duty burnt clay building bricks (Third Revision) |
Specification for heavy duty burnt clay building bricks (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.4 (Bulk Density) |
500.0 |
|
| 6.3 (Efforescence) |
1000.0 |
|
| 6.2 (Water Absorption) |
1000.0 |
|
| 6.1 (Compressive Strength) |
2000.0 |
|
| 5 (Dimensions & Tolerances) |
500.0 |
|
|
| 3973 |
National Test House (ER), Kolkata
| IS 3812 : Part 2 (2013) - Pulverized Fuel Ash - Part 2 : For Use as Admixture in Cement Mortar and Concrete |
Pulverized Fuel Ash - Part 2 : For Use as Admixture in Cement Mortar and Concrete |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 (Soundness by autoclave test — Expansion of specimen ) |
1500.0 |
|
| 7.1 (Particles retained on 45 micron IS sieve (wet sieving) ) |
1000.0 |
|
| 7.1 (Fineness — Specific surface by Blaine’s permeability method) |
1000.0 |
|
|
| 3974 |
National Test House (ER), Kolkata
| IS 3812 (Part 1) (2013) - Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete |
Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 (Soundness by autoclave test — Expansion of specimen ) |
1500.0 |
|
| 7.1 (Compressive strength at 28 days ) |
3000.0 |
|
| 7.1 ( Lime reactivity — Average compressive strength ) |
3000.0 |
|
| 7.1 (Particles retained on 45 micron IS sieve (wet sieving) ) |
1000.0 |
|
| 5.1 ,6.1 (Loss on ignition) |
500.0 |
|
| 5.1 ,6.1 (Total Chlorides) |
500.0 |
|
| 5.1 ,6.1 (Available alkali as equivalent sodium oxide (Na2O)) |
500.0 |
|
| 5.1 ,6.1 (Total Sulphur as sulphur trioxide(SO3)) |
500.0 |
|
| 5.1 ,6.1 (Magnesium oxide(MgO)) |
500.0 |
|
| 5.1 ,6.1 (Reactive Silica) |
500.0 |
|
| 5.1 ,6.1 (Silicon dioxide(SiO2)) |
500.0 |
|
| 5.1 ,6.1 (Silicon dioxide(SiO2) plus aluminium oxide (Al2O3) plus iron oxide (Fe2O3)) |
500.0 |
|
| - (Specific gravity) |
1000.0 |
|
|
| 3975 |
National Test House (ER), Kolkata
| IS 2595 (2008) - Industrial radiographic testing - Code of practice (Second Revision) |
Industrial radiographic testing - Code of practice (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IS 2595 (Radiography) |
2000.0 |
|
|
| 3976 |
National Test House (ER), Kolkata
| IS 13801 (2013) - Chequered Cement Concrete Tiles - |
Chequered Cement Concrete Tiles - |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 12.6 (Resistance to wear) |
2000.0 |
|
| 12.5 (Wet transverse strength) |
2000.0 |
|
| 12.4 (Water Absorption) |
1000.0 |
|
| 12.3 (Straightness) |
500.0 |
|
| 12.2 (Perpendicularity) |
500.0 |
|
| 12.1 (Flatness) |
500.0 |
|
| 10 (General Quality) |
100.0 |
|
| 8.3 (Thickness of Wearing Layer) |
500.0 |
|
| 7 (Dimension: Thickness) |
1000.0 |
|
| 7.1,Table 1,Column 2 (Dimensions -Length) |
300.0 |
|
|
| 3977 |
National Test House (WR), Mumbai
| IS 694 (2010) - Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1100 v (Fourth Revision) |
Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1100 v (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 15 (Marking of the cable) |
1500.0 |
|
| 11.2 (Legibility of marking) |
100.0 |
|
| 11.1 (Durability of marking) |
100.0 |
|
| 11 (Cable identification) |
200.0 |
|
| Table 1 tests Sl No 1 (iii) a (4) (Conductor resistance ) |
1500.0 |
|
| Table 1. iii. b(5) (Overall dimension) |
500.0 |
|
| Table 1. iii. c.3(2) (Percentage elongation after ageing for insulation(Core 1)) |
500.0 |
|
| Table 1. iii. d.2 (Loss of mass test for sheath) |
- |
|
| Table 1. iii. e.1(1) (High voltage test (water immersion test)) |
3000.0 |
|
| Table 1. iii. e.3 , ii.g (Insulation resistance test) |
2000.0 |
|
| Table 1. iii. e.3 , ii.g (Insulation resistance test) |
2000.0 |
|
| Table 1. iii. e.4(1) (Flammability Test on complete cable -Period of burning) |
500.0 |
|
| Table 1. Sl No.ii (Acceptance Test) |
12000.0 |
|
| Table 1 tests Sl No 1 (iii) a (1) (Elongation property of annealed copper) |
1000.0 |
|
| Table 1 tests Sl No 1 (iii) a (2) (Tensile strength of Aluminium wire) |
1000.0 |
|
| Table 1 tests Sl No 1 (iii) b (Average thickness of insulation) |
250.0 |
|
| Table 1 tests Sl No 1 (iii) b (Minimum thickness of insulation) |
250.0 |
|
| Table 1 tests Sl No 1 (iii) b (Average thickness of sheath) |
250.0 |
|
| Table 1 tests Sl No 1 (iii) b (Minimum thickness of sheath) |
250.0 |
|
| Table 1 tests Sl No 1 (iii) C (1) (Elongation before ageing) |
500.0 |
|
| Table 1 tests Sl No 1 (iii) C (3) (Tensile strength after ageing) |
500.0 |
|
| Table 1 tests Sl No 1 (iii) C (3) (Elongation after ageing) |
500.0 |
|
| Table 1 tests Sl No 1 (iii) C (4) (Shrinkage) |
500.0 |
|
| Table 1 tests Sl No 1 (iii) C (5) (Heat shock) |
500.0 |
|
| Table 1 tests Sl No 1 (iii) d (6) (Depth of indentation) |
500.0 |
|
| Table 1 tests Sl No 1 (iii) C (7) (Thermal stability) |
500.0 |
|
| Table 1 tests Sl No 1 (iii) C (8) (Cold bend test) |
1000.0 |
|
| Table 1 tests Sl No 1 (iii) C (9) (Cold impact test) |
1000.0 |
|
| Table 1 tests Sl No 1 (iii) C (11) (Oxygen index ) |
5000.0 |
|
| Table 1 tests Sl No 1 (iii) C (13) (Halogen acid gas evaluation) |
5000.0 |
|
| Table 1 tests Sl No 1 (iii) C (12) (Temperature index) |
5000.0 |
|
| Table 1 tests Sl No 1 (iii) C (14) (Smoke density rating) |
5000.0 |
|
| Table 1 tests Sl No 1 (iii) e (1) (High voltage test DC) |
2000.0 |
|
| Table 1 tests Sl No 1 (iii) e (3) (Volume resistivity at ambient temperature (27 degree C +/- 2 degree C )) |
500.0 |
|
| Table 1 tests Sl No 1 (iii) e (3) (Volume resistivity at maximum rated temperature (For Type A-70 Degree C and For Type C -85 Degree C) |
500.0 |
|
| Table 1 tests Sl No 1 (ii) q (Persulphate test ) |
1500.0 |
|
| Table 1 tests Sl No 1 (iii) d (1) (Tensile strength) |
500.0 |
|
| Table 1 tests Sl No 1 (iii) d (1) (Elongation) |
500.0 |
|
| Table 1 tests Sl No 1 (iii) d (4) (Shrinkage) |
500.0 |
|
| Table 1 tests Sl No 1 (iii) d (5) (Heat shock) |
500.0 |
|
| Table 1 tests Sl No 1 (iii) d (6) (Depth of indentation) |
500.0 |
|
| Table 1 tests Sl No 1 (iii) d (7) (Thermal stability) |
500.0 |
|
| Table 1 tests Sl No 1 (iii) d (8) (Oxygen index ) |
5000.0 |
|
| Table 1 tests Sl No 1 (iii) d (10) (Halogen acid gas evaluation) |
5000.0 |
|
| Table 1 tests Sl No 1 (iii) d (9) (Temperature index) |
5000.0 |
|
| Table 1 tests Sl No 1 (iii) d (11) (Smoke density rating) |
5000.0 |
|
| Table 1 tests Sl No 1 (iii) d (12) (Cold bend test) |
1000.0 |
|
| Table 1 tests Sl No 1 (iii) d (13) (Cold impact test) |
1000.0 |
|
|
| 3978 |
National Test House (ER), Kolkata
| IS 2690 : Part 1 (1990) - Burnt clay flat terracing tiles- Specification Part 1 Machine made |
Burnt clay flat terracing tiles- Specification Part 1 Machine made |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Warpage IS2690(1)) |
1000.0 |
|
| 7 (Flexural Strength IS 2690(1)) |
2000.0 |
|
| 6 (Water absorption IS 2690(1)) |
1000.0 |
|
| 5 (Dimensions IS 2690(1)) |
500.0 |
|
|
| 3979 |
National Test House (ER), Kolkata
| IS 1077 (1992) - Common burnt clay building bricks - Specification (Fifth Revision) |
Common burnt clay building bricks - Specification (Fifth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.3 (Efflorescence IS 3495 (Part 3) : 2019) |
1000.0 |
|
| 7.2 (Water Absorption IS 3495 (Part 2) : 2019) |
1000.0 |
|
| 7.1 (Compressive Strength-IS 3495 (Part 1) : 2019) |
2000.0 |
|
| 6 (DIMENSIONS AND TOLERANCES-IS 1077 : 1992) |
500.0 |
|
| 5 (GENERAL QUALITY IS 1077 : 1992) |
500.0 |
|
|
| 3980 |
National Test House (SR), Chennai
| IS 15489 (2013) - Paint, plastic emulsion - Specification (First Revision) |
Paint, plastic emulsion - Specification (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.12 (Toxic metals such
as lead, cadmium, chromium (VI)) |
3600.0 |
|
| 6.12 (Volatile organic compounds,) |
2000.0 |
|
| 6.1 (Keeping properties) |
5000.0 |
|
| 6.5 (Mass in kg/10 litre (IS 101 (Part 1/Sec 7))) |
500.0 |
|
| 6.11 (Recoating properties, (Annexure J of IS 15489:2013)) |
2000.0 |
|
| 6.11 (Washability and cleanability (Annexure G of IS 15489:2013)) |
1900.0 |
|
| 6.11 (Resistance to alkali (Annexure F of IS 15489:2013)) |
500.0 |
|
| 6.11 (Colour (Annexure E of IS 15489:2013)) |
100.0 |
|
| 6.11 (Gloss at 60 degree d) Class D, (IS 101 (Part 4/Sec 4))) |
200.0 |
|
| 6.11 (Gloss at 60 degree c) Class C, (IS 101 (Part 4/Sec 4))) |
200.0 |
|
| 6.11 (Gloss at 60 degree b) Class B, (IS 101 (Part 4/Sec 4))) |
200.0 |
|
| 6.11 (Gloss at 60 degree a) Class A (IS 101 (Part 4/Sec 4))) |
200.0 |
|
| 6.11 (Finish (Annexure D of IS 15489:2013)) |
1200.0 |
|
| 6.11 (Consistency (Annexure B of IS 15489:2013)) |
1200.0 |
|
| 6.11 (Drying time a) Hard dry (Class C and D) (Annexure D of IS 15489:2013)) |
200.0 |
|
| 6.11 (Drying time a) Hard dry (Class A and B) (Annexure D of IS 15489:2013)) |
1200.0 |
|
| 6.11 (Drying time a) Surface dry (Class C and D) (Annexure D of IS 15489:2013)) |
1200.0 |
|
| 6.11 (Drying time a) Surface dry (Class A and B) (Annexure D of IS 15489:2013)) |
1200.0 |
|
| 6.9 (Lead Restriction) |
1000.0 |
|
| 6.7 & 6.11 (Fastness to Light (Xenon Arc apparatus for 500 hrs)
(IS 101 Part 4/ Sec 3)) |
15000.0 |
|
| 6.6 (Opacity (IS 101 ( Part 1/Sec 3))) |
1000.0 |
|
| 6.2 (Conditions in the Container) |
200.0 |
|
| 6.3 (Thinning) |
1000.0 |
|
| 6.4 (Application Properties) |
700.0 |
|
| Table 1, Sl No. (ii)(a) (Drying time, Surface Dry) |
1200.0 |
|
| Table 1, Sl No. (ii)(b) (Drying time, Hard dry) |
1200.0 |
|
| 6.11 (Temperature stability test
-5 ± 1 °C, 60 ± 2 °C) |
1000.0 |
|
| 6.11 (Gloss at 60 deg) |
1200.0 |
|
|
| 3981 |
National Test House (SR), Chennai
| IS 2074 (2015) - Ready Mixed Paint, Air Drying, Red Oxide - Zinc Chrome, Priming - Specification |
Ready Mixed Paint, Air Drying, Red Oxide - Zinc Chrome, Priming - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.6, xii (Keeping properties) |
5000.0 |
|
| 5.6,xi (Accelerated storage stability test) |
200.0 |
|
| 5.6,x.c (Resistance to salt spray) |
500.0 |
|
| 5.6,x.b (Resistance to sea water (applicable for marine paints only)) |
50.0 |
|
| 5.6,x.a (Resistance to humidity) |
2500.0 |
|
| 5.6,ix (Volume solids) |
200.0 |
|
| 5.6,viii (Flash point) |
500.0 |
|
| 5.6,vii.b (Flexibility and adhesion: Scratch hardness (load 1000g)) |
100.0 |
|
| 5.6,vii.a (Flexibility and adhesion:Bend test (with 6.25 mm dia mandrel and in type 1 apparatus)) |
100.0 |
|
| 5.6,vi (Colour) |
50.0 |
|
| 5.6,v (Fineness of grind, microns) |
100.0 |
|
| 5.6,iv.b (Gloss, 60º) |
100.0 |
|
| 5.6,iv.a (Finish) |
100.0 |
|
| 5.6,iii.b (Drying: hard dry) |
100.0 |
|
| 5.6,iii.a (Drying: Surface dry) |
100.0 |
|
| 5.6,ii (Mass, kg/10litre) |
200.0 |
|
| 5.6,i. b (Viscosity by Ford cup No. 4 at 27 ± 2°C) |
200.0 |
|
| 5.6,i. a (Consistency) |
200.0 |
|
| 5.5 (Lead Restriction) |
200.0 |
|
| 5.3 (Compatibility with thinner) |
200.0 |
|
| 5.1.2 (Volatile vehicle) |
200.0 |
|
| 5.1.1.b (Synthetic red oxides of iron red
oxide (as Fe2O3)) |
1000.0 |
|
| 5.1.1.a (zinc oxide) |
500.0 |
|
| 5.1.1.a (chromic anhydride) |
1000.0 |
|
| 5.1.1.a (Zinc chrome) |
500.0 |
|
| 5.1.a (Pigment, percent by mass) |
1200.0 |
|
|
| 3982 |
National Test House (SR), Chennai
| IS 427 (2013) - Distemper, dry, colour as required - Specification (Third Revision) |
Distemper, dry, colour as required - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 3983 |
National Test House (NWR), Jaipur
| IS 10500 (2012) - Drinking Water - Specification (Second Revision) |
Drinking Water - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Alachlor) |
500.0 |
|
| 4 (Atrazine) |
300.0 |
|
| 4 (Aldrin/ Dieldrin) |
300.0 |
|
| 4 (Alpha HCH) |
300.0 |
|
| 4 (Beta HCH) |
300.0 |
|
| 4 (Butachlor) |
300.0 |
|
| 4 (Chlorpyriphos) |
500.0 |
|
| 4 (Delta HCH) |
300.0 |
|
| 4 (2,4- Dichlorophenoxyacetic acid) |
300.0 |
|
| 4 (DDT (o, p and p, p – Isomers of DDT DDE and DDD)) |
1000.0 |
|
| 4 (Endosulfan (alpha, beta, and sulphate)) |
1000.0 |
|
| 4 (Ethion) |
300.0 |
|
| 4 (Gamma — HCH (Lindane)) |
300.0 |
|
| 4 (Isoproturon) |
300.0 |
|
| 4 (Malathion) |
300.0 |
|
| 4 (Methyl parathion) |
300.0 |
|
| 4 (Monocrotophos) |
300.0 |
|
| 4 (Phorate) |
300.0 |
|
| 4 (Colour - IS 3025 (Part 4): 2021, Clause 4) |
200.0 |
|
| 4 (Odour - IS 3025 (Part 5) : 2018) |
300.0 |
|
| 4 (pH value- IS 3025 (Part 11) : 2022) |
300.0 |
|
| 4 (Taste - IS 3025 (Part 8) : 2023)) |
200.0 |
|
| 4 (Turbidity - IS 3025 (Part 10) : 2023) |
200.0 |
|
| 4 (Total Dissolved Solids - IS 3025 (Part 16) : 2023) |
500.0 |
|
| 4 (Aluminium (as Al) - IS 3025 (Part 55): 2003) |
500.0 |
|
| 4 (Anionic detergents (as MBAS) - Annex K of IS 13428 : 2005) |
500.0 |
|
| 4 (Barium (as Ba) - Annex F of IS 13428 : 2005) |
500.0 |
|
| 4 (Boron (as B) - IS 3025 (Part 57): 2005) |
500.0 |
|
| 4 (Calcium (as Ca) - IS 3025 (Part 40) : 1991, Clause 5) |
500.0 |
|
| 4 (Chloride (as Cl) - IS 3025 (Part 32): 1988, Clause 2/IS 3025 (Part 75) : 2022) |
500.0 |
|
| 4 (Copper (as Cu) - IS 3025 (Part 42): 1992) |
500.0 |
|
| 4 (Fluoride (as F) - IS 3025 (Part 75) : 2022) |
500.0 |
|
| 4 (Free residual chlorine - IS 3025( Part 26) : 2021, Clause 7) |
400.0 |
|
| 4 (Iron (as Fe) - IS 3025 (Part 53) :2003, Clause 7) |
500.0 |
|
| 4 (Magnesium (as Mg) - IS 3025 (Part 46): 1994) |
500.0 |
|
| 4 (Manganese (as Mn) - IS 3025 (Part 59): 2006) |
500.0 |
|
| 4 (Mineral Oil - IS 3025 (Part 39): 2021, Clause 6) |
500.0 |
|
| 4 (Nitrate (as NO3) - IS 3025 (Part 75): 2022) |
500.0 |
|
| 4 (Phenolic compounds (as C6H5OH) - IS 3025 (Part 43/Sec 1): 2022, Clause 6) |
500.0 |
|
| 4 (Selenium (as Se) - IS 3025 (Part 56): 2003) |
500.0 |
|
| 4 (Silver (as Ag) - Annex J of IS 13428 : 2005) |
500.0 |
|
| 4 (Sulphate (as SO4) - IS 3025 (Part 75) : 2022) |
500.0 |
|
| 4 (Sulphide (as H2S) - IS 3025 (Part 29) : 2022, Clause 7) |
300.0 |
|
| 4 (Total alkalinity as Calcium carbonate - IS 3025 (Part 23): 2023) |
400.0 |
|
| 4 (Total Hardness (as CaCO3) - IS 3025 (Part 21) : 2009) |
500.0 |
|
| 4 (Zinc (as Zn) - IS 3025 (Part 49): 1994) |
500.0 |
|
| 4 (Cadmium (as Cd) - IS 3025 (Part 41) : 2022) |
500.0 |
|
| 4 (Cyanide (as CN) - IS 3025 (Part 27/Sec 1) :2021, Clause 5)) |
500.0 |
|
| 4 (Lead (as Pb) - IS 3025 (Part 47) : 1994) |
500.0 |
|
| 4 (Mercury (as Hg) - IS 3025 (Part 48) : 1994) |
500.0 |
|
| 4 (Nickel (as Ni) - IS 3025 (Part 54):2003) |
500.0 |
|
| 4 (Total Arsenic (as As) - IS 3025 (Part 37): 2022) |
500.0 |
|
| 4 (Total Chromium (as Cr) - IS 3025 (Part 52) : 2003) |
500.0 |
|
| 4 (Polychlorinated biphenyls) |
500.0 |
|
| 4 (Polynuclear Aromic Hydrocarbons (as PAH)) |
500.0 |
|
| 4.1 (Escherichia coli per 100 ml, Method: IS 15185:2016) |
1750.0 |
|
| 4.1 (Total Coliform Bacteria per 100 ml, Method: IS 15185:2016) |
1750.0 |
|
|
| 3984 |
National Test House (NWR), Jaipur
| IS 13428 (2005) - Packaged Natural Mineral Water - Specification (Second Revision) |
Packaged Natural Mineral Water - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.1.1 (Escherichia coli) |
1000.0 |
|
| 6.1.2 (Coliform) |
1000.0 |
|
| 6.1.3 (Faecal Streptococci) |
1000.0 |
|
| 6.1.3 (Staphylococcus aureus) |
1000.0 |
|
| 6.1.4 (Sulphite reducing Anaerobes) |
1000.0 |
|
| 6.1.5 (Pseudomonas aeruginosa) |
1000.0 |
|
| 6.1.6 (Yeast & Mould) |
1000.0 |
|
| 6.1.7 (Salmonella sp) |
1000.0 |
|
| 6.1.7 (Shigella sp) |
1000.0 |
|
| 6.1.8 (Vibrio cholerae) |
1000.0 |
|
| 6.1.8 (Vibrio parahaemolyticus) |
1000.0 |
|
| 6.3 (Isoproturon) |
5000.0 |
|
| 6.3 (2,4-D) |
5000.0 |
|
| 6.3 (Butachlor) |
5000.0 |
|
| 6.3 (Alachlor) |
5000.0 |
|
| 6.3 (Monocrotophos) |
5000.0 |
|
| 6.3 (Malaxon) |
5000.0 |
|
| 6.3 (Malathion) |
5000.0 |
|
| 6.3 (Paraxon methyl) |
5000.0 |
|
| 6.3 (Methyl parathion) |
5000.0 |
|
| 6.3 (Phorate sulfoxide) |
5000.0 |
|
| 6.3 (Phorate sulfone) |
5000.0 |
|
| 6.3 (Phorate) |
5000.0 |
|
| 6.3 (Dieldrin) |
5000.0 |
|
| 6.3 (Aldrin) |
5000.0 |
|
| 6.3 (Atrazine) |
5000.0 |
|
| 6.3 (Ethion) |
5000.0 |
|
| 6.3 (Chloropyrifos) |
5000.0 |
|
| 6.3 (Endosulfan sulphate) |
5000.0 |
|
| 6.3 (Beta-Endosulfan) |
5000.0 |
|
| 6.3 (Alpha-Endosulfan) |
5000.0 |
|
| 6.3 (Delta-HCH) |
5000.0 |
|
| 6.3 (Gamma-HCH) |
5000.0 |
|
| 6.3 (Βeta-HCH) |
5000.0 |
|
| 6.3 (Αlpha-HCH) |
5000.0 |
|
| 6.3 (p, p-DDT) |
5000.0 |
|
| 6.3 (o, p-DDT) |
5000.0 |
|
| 6.3 (p, p-DDE) |
5000.0 |
|
| 6.3 (o, p-DDE) |
5000.0 |
|
| 6.3 (p, p-DDD) |
5000.0 |
|
| 6.3 (o, p-DDD) |
5000.0 |
|
| 6.3 (Total pesticide residue) |
5000.0 |
|
| 6.2 (Polynuclear aromatic hydrocarbons (PAH)) |
2000.0 |
|
| 6.2 (Polychlorinated biphenyls (PCB)) |
2000.0 |
|
| 6.2 (Nickel (as Ni)) |
1000.0 |
|
| 6.2 (Chromium (as Cr)) |
1000.0 |
|
| 6.2 (Lead (as Pb)) |
1000.0 |
|
| 6.2 (Cyanide (as CN)) |
1000.0 |
|
| 6.2 (Arsenic (as As)) |
2000.0 |
|
| 6.2 (Cadmium (as Cd)) |
1000.0 |
|
| 6.2 (Mercury (as Hg)) |
2000.0 |
|
| 6.2 (Borates (as B)) |
1000.0 |
|
| 6.2 (Antimony (as Sb)) |
1000.0 |
|
| 6.2 (Sulphide (as H2S)) |
1000.0 |
|
| 6.2 (Anionic Surface active agents (as MBAS)) |
1000.0 |
|
| 6.2 (Mineral oil) |
1000.0 |
|
| 6.2 (Phenolic compounds (as C6H5OH)) |
1000.0 |
|
| 6.2 (Sodium (as Na)) |
1000.0 |
|
| 6.3 (Total pesticide residue) |
5000.0 |
|
| 6.2 (Magnesium (as Mg)) |
1000.0 |
|
| 6.2 (Calcium (as Ca)) |
1000.0 |
|
| 6.2 (Alkalinity (as HCO3)) |
1000.0 |
|
| 6.2 (Sulphate (as SO4)) |
1000.0 |
|
| 6.2 (Selenium (as Se)) |
1000.0 |
|
| 6.2 (Chloride (as Cl)) |
1000.0 |
|
| 6.2 (Silver (as Ag)) |
1000.0 |
|
| 6.2 (Zinc (as Zn)) |
1000.0 |
|
| 6.2 (Fluoride (as F)) |
1000.0 |
|
| 6.2 (Nitrite (as NO2)) |
1000.0 |
|
| 6.2 (Nitrate (as NO3)) |
1000.0 |
|
| 6.2 (Manganese (as Mn)) |
1000.0 |
|
| 6.2 (Copper (as Cu)) |
1000.0 |
|
| 6.2 (Barium (as Ba)) |
1000.0 |
|
| 6.2 (pH) |
1000.0 |
|
| 6.2 (Total dissolved solids) |
1000.0 |
|
| 6.2 (Turbidity, NTU) |
1000.0 |
|
| 6.2 (Taste) |
1000.0 |
|
| 6.2 (Odour) |
1000.0 |
|
| 6.2 (Colour, true colour units) |
1000.0 |
|
|
| 3985 |
National Test House (ER), Kolkata
| IS 303 (1989) - Plywood for General Purposes - |
Plywood for General Purposes - |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 11.2.2 (Glue Adhesion-Mycological Test -IS 1734 (Part 7):1983 & IS 1734 (Part 5):1983) |
1500.0 |
|
| 11.2.1 (Glue Adhesion-Water Resistance Test- IS 303:1989 & IS 1734 (Part 5):1983) |
2000.0 |
|
| 11.4 & Table 4 (Static Bending Strength-IS 1734 (Part 11):1983) |
3000.0 |
|
| 11.3 (Moisture content-IS 1734 (Part 1):1983) |
1000.0 |
|
| 9 (Workmanship & Finish-IS 303:1989) |
500.0 |
|
| 8 & Table 3 (Dimensions and Tolerances-IS 303:1989, Annex C) |
2000.0 |
|
|
| 3986 |
National Test House (NR), Ghaziabad
| IS 269 (2015) - Ordinary portland cement - Specification (Sixth Revision) |
Ordinary portland cement - Specification (Sixth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.1, Table2, Sl No 8 (Alkali content IS 4032:1985) |
1000.0 |
|
| 6.1, Table2, Sl No 7 (Chloride content IS 4032:1985) |
500.0 |
|
| 6.1, Table2, Sl No 6 (Loss on ignition IS 4032:1985) |
600.0 |
|
| 6.1, Table2, Sl No 5 (Total Sulphur content percent by mass, IS 4032:1985) |
500.0 |
|
| 6.1, Table2, Sl No 4 (Magnesia IS 4032:1985) |
600.0 |
|
| 6.1, Table2, Sl No 3 (Insoluble residue, IS 4032:1985) |
600.0 |
|
| 6.1, Table2, Sl No 2 (Ratio of percentage of alumina to that of iron oxide IS 4032:1985) |
600.0 |
|
| 6.1, Table2, Sl No 1 (Ratio of percentage of lime to percentages of silica, alumina and iron oxide, IS 4032 : 1985) |
600.0 |
|
| 7, Table 3, Sl No 4c (Compressive strength, MPa (c) 672 ± 4 h IS 4031 (Part 6):1988) |
1000.0 |
|
| 7, Table 3, Sl No 4b (Compressive strength, MPa (b) 168 ± 2 h IS 4031 (Part 6):1988) |
1000.0 |
|
| 7, Table 3, Sl No 4a (Compressive strength, MPa-(a) 72 ± 1 h IS 4031 (Part 6):1988) |
1000.0 |
|
| 7, Table 3, Sl No 3b (Setting time: b) Final, IS 4031 (Part 5):1988) |
250.0 |
|
| 7, Table 3, Sl No 3a (Setting time: a) Initial IS 4031 (Part 5):1988) |
250.0 |
|
| 7, Table 3, Sl No 2b (Soundness b) By autoclave test method IS 4031 (Part 3):1988) |
1000.0 |
|
| 7, Table 3, Sl No 2a (Soundness: a) By Le-Chatelier method, IS 4031 (Part 3):1988) |
500.0 |
|
| 7, Table 3, Sl No 1 (Fineness IS 4031 (Part 2):1999) |
1000.0 |
|
| 4031 Part (4) (Consistency, %) |
500.0 |
|
|
| 3987 |
National Test House (SR), Chennai
| IS 8084 (1976) - Specification for interconnecting bus - Bars for ac voltage above 1 kV up to and including 36 kV |
Specification for interconnecting bus - Bars for ac voltage above 1 kV up to and including 36 kV |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (@250A) |
12500.0 |
|
| 4 (@500A) |
15000.0 |
|
| 4 (@1000A) |
17500.0 |
|
| 4 (@1500A) |
20000.0 |
|
| 4 (@2000A) |
25250.0 |
|
| 4 (@2500A) |
25000.0 |
|
| 4 (@3000A) |
27500.0 |
|
| 4 (@3500A) |
30000.0 |
|
|
| 3988 |
National Test House (SR), Chennai
| IS 9000 : Part V : Sec 2 (1981) - Electric and Electronics items (size less than 1 cubic meter) |
Electric and Electronics items (size less than 1 cubic meter) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Damp (Cycle ) Test) |
20000.0 |
|
|
| 3989 |
National Test House (SR), Chennai
| IS 9000 : Part V : Sec 1 (1981) - Electric and Electronics items (size less than 1 cubic meter) |
Electric and Electronics items (size less than 1 cubic meter) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Damp (Cycle ) Test) |
20000.0 |
|
|
| 3990 |
National Test House (SR), Chennai
| IS 9000 : Part II : Sec 2 (1977) - Electric and Electronics items (size less than 1 cubic meter) |
Electric and Electronics items (size less than 1 cubic meter) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Cold Test for non heating dissipating items with sudden change of temperature) |
20000.0 |
|
|
