NTH - Management Information System

Search by Standard No.

Reset

4134 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

361

National Test House (NER), Guwahati

IS 1489(Part 1):2015 - PORTLAND POZZOLANA CEMENT-SPECIFICATION

PORTLAND POZZOLANA CEMENT-SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table1,6.i.a (Insoluble residue, percent by mass-maximum)	500.0
Table1,6.ii (Magnesia, percent by mass)	500.0
Table1,6.iii (Total Sulphur content as sulphuric anhydride (SO3), percent by mass)	500.0
Table1,6.iv (Loss on ignition, percent by mass)	500.0
Table1,6.v (Chloride content, percent by mass)	500.0
Table1,6.vi (Alkali content (%))	1000.0
Table 2, 7, i (Fineness, sq m/kg)	1000.0
Table 2, 7, iv,a (Compressive strength-MPa, 72±1 h)	1000.0
Table 2, 7, iv,b (Compressive strength-MPa, 168±2 h)	1000.0
Table 2, 7, iv,c (Compressive strength-MPa, 672±4 h)	1000.0
Table 2, 7, iii a (Setting time-Initial, minutes)	250.0
Table 2, 7, iii,b (Setting time-final, minutes)	250.0
Table 2 ,7.ii.a (Soundness-Lechatelier method,mm)	500.0
Table 2 ,7.ii.b (Soundness-autoclave method, percent)	1000.0
Table 2, 7, vi (Drying shrinkage,percent)	1000.0
custom (Consistency (%))	500.0

362

National Test House (NR), Ghaziabad

Custom - Specification for Paper

Specification for Paper

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Vide Annexure)	12000.0

363

National Test House (WR), Mumbai

IS 8662 (2004) - Enamel, synthetic exterior: (A) undercoating (B) finishing, for railway coaches - Specification (Second Revision)

Enamel, synthetic exterior: (A) undercoating (B) finishing, for railway coaches - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.6.xiii (Keeping properties)	5000.0
6.6.xii (Accelerated storage stability test, at 60 degC, 96 h)	3000.0
6.6.xi.b (Phthalic anhydride content of non-volatile vehicle)	3000.0
6.6.xi.a (Volume solids)	3000.0
6.6.x (Flash point)	1500.0
6.6.ix (Flexibility and adhesion)	1200.0
6.6.viii (Scratch hardness after 48 h air drying (1 000 g weight))	1500.0
6.6.vii (Water content (if suspected to be present) - IS 101 (Part 2/Sec 1))	1200.0
6.6.vi (Colour)	1200.0
6.6.v (Fineness of grind,)	1200.0
6.6.iv.b (Gloss , 60 deg)	1500.0
6.6.iv.a (Fnish)	1200.0
6.6.iii.d (Drying time Tack Free)	1200.0
6.6.iii.c (Hard dry at 70 DegC with 15 min flash- off time)	1200.0
6.6.iii.a (Drying time Surface Dry)	1200.0
6.6.ii (Mass, in kg/101itres)	1500.0
6.6.i.b (Viscosity byFord cup No. 4)	1200.0
6.6.i.a (Consistency)	1200.0
6.5 (Resistance to Alkali (for Finishing Only)	1500.0
6.4 (Resistance to Acid (for Finishing Only))	1500.0
6.3 (Durability( Normal Outdoor Exposer))	10000.0
6.2.6 (Application Properties)	1200.0
6.2.5 (Thinning Properties)	1200.0
6.2.4 (Skin Formation)	1200.0
6.2.3 (Freedom from Coarse Particles)	1200.0
6.2 (Condition in Container)	1200.0
CLAUSE-4.5.2,Table-1 (Dry Film Thickness(DFT))	1500.0
6.7 (Pigment content)	1000.0
Cl.6.8 Table 2 (Test Result, General parameters only- (Please see Annexure))	10000.0
ICF/MD/Specn. 045 (Durability test (QUV Accelerated Weathering, 250 Hrs), Accelerated Storage Test, Wet abrasion test)	20000.0
Enamel, synthetic exterior: (A) undercoating (B) finishing, for railway coaches - Specification (Second Revision) (Keeping Properties 12 months)	5000.0

364

National Test House (ER), Alipore

IIWIC-PCS (2025) - IIW-India Certification Personnel Certification Scheme for MMAW-Foundation

IIW-India Certification Personnel Certification Scheme for MMAW-Foundation

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.0 (Visual Examination)	1000.0
3.0 (Macro Examination (01 position))	1000.0
3.0 (Macro Examination (02 positions))	2000.0
3.0 (Fracture Test)	3000.0
3.0 (Face Bend)	1000.0
3.0 (Root Bend)	1000.0

365

National Test House (ER), Kolkata

IS: 16106: 2012 (2012) - Electrical and Photometric Measurements of Solid-State Lighting Products Including Safety tests as per the customers request

Electrical and Photometric Measurements of Solid-State Lighting Products Including Safety tests as per the customers request

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Electrical, Photometric & Colorimetric Tests up to 200W)	18000.0
1 (Electrical, Photometric & Colorimetric Tests up to 300W)	21000.0
2 (Ingress protection test as per Cl. 13 & 14 of IS/IEC 60529:2001 (IP code))	3000.0
3 (Impact Resistance test as per IS 17050 (IK test))	2500.0
4 (Surge Protection Test as per Cl. 5 of IS 61000-4-5:2005)	1500.0
5 (Destrictive test (Reliability test) for LED chip visual verification as per customer request)	1500.0
6 (DC or AC Supplied Electronic Controlgear for LED Modules(Performance requirements except Accelerated Operational Life test) as per IS 16104: 2012)	25600.0

366

National Test House (NWR), Jaipur

Custom_4658-2019_Government_Raj (2025) - Custom_4658-2019_Government_Raj

Custom_4658-2019_Government_Raj

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (IS:4658_General)	500.0
5.2 (IS:1060(Pt-1)_Thickness)	1000.0
5.3 (IS:1060(pt-1)_Substance (Grammage))	1000.0
5.4 (IS:1064_Size and Tolerance)	500.0
5.5 (Table-1) (IS:1060(Pt-6/sec-2)_Burst Index)	1000.0
5.5 (Table-1) (IS:1060(pt-3)_Wax Pick)	2000.0
5.5 (Table-1) (IS:1060(pt-3)_Surface pH)	1000.0
5.5 (Table-1) (IS:1060(pt-1)_Gloss)	1000.0
5.5 (Table-1) (IS/ISO:2470(pt-1)_Brightness)	2000.0
5.5 (Table-1) (Bendtsen type)	2000.0
5.5 (Table-1) (IS:1060(pt-1)_Bulk)	1000.0
5.5 (Table-1) (IS:4658_Annx-C_Stiffness Factor)	1000.0

367

National Test House (NR), Ghaziabad

17425 (2020) - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems

Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1.2 (Hydraulic Characteristic (Quality Test), 7.1.2)	5000.0

368

National Test House (NR), Ghaziabad

IS 17425 (2020) - Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

Irrigation Equipment - Quick Coupled Polyethylene Pipes and Fittings for Sprinkler Irrigation Systems - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

369

National Test House (NR), Ghaziabad

Standard FSSAI Regulations (2011) - FOOD SAFETY AND STANDARDS (FOOD PRODUCTS STANDARDS AND FOOD ADDITIVES) REGULATIONS

FOOD SAFETY AND STANDARDS (FOOD PRODUCTS STANDARDS AND FOOD ADDITIVES) REGULATIONS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2.10.8 (Chemical Test Results (Wheat Flour))	6000.0
2.10.8 (Chemical Test (Rice))	7000.0

370

National Test House (ER), Kolkata

IS 1235 (1988) - Specification for acetic anhydride (First Revision

Specification for acetic anhydride (First Revision

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.2 (Ash, Percent by mass)	1000.0

371

National Test House (NR), Ghaziabad

IS 17048 (2018) - Halogen Free Flame Retardant (HFFR) Cables for Working Voltages up to and including 1100 Volts-Specification

Halogen Free Flame Retardant (HFFR) Cables for Working Voltages up to and including 1100 Volts-Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Acceptance Tests(2 Core) (Conductor resistance test, Test for thickness of insulation and sheath,diameter of core and sheath including ovality of sheath,Tensile strength and elongation at break of insulation and sheath, Insulation resistance , High voltage test,Flammability test and pH and conductivity.)	24000.0

372

National Test House (NWR), Jaipur

BS 1400 (1985) - Copper Alloy Ingots and Copper Alloy high conductivity castings

Copper Alloy Ingots and Copper Alloy high conductivity castings

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Tin (as Sn))	1000.0
2 (Copper (as Cu))	1000.0
3 (Zinc (as Zn))	1000.0
4 (Lead (as Pb))	1000.0
5 (Phosphorus (as P))	1000.0
6 (Nickel (as Ni))	1000.0
7 (Iron (as Fe))	1000.0
8 (Aluminium (as Al))	1000.0
9 (Manganese (as Mn))	1000.0
10 (Silicon (as Si))	1000.0
11 (Antimony (as Sb))	1000.0
12 (Sulphur (as S))	1000.0

373

National Test House (ER), Alipore

ND CUSTOM 11 (2025) - LOAD TESTING OF MECHANICAL JACK

LOAD TESTING OF MECHANICAL JACK

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (MECHANICAL JACK UPTO 10 TON CAPACITY- LOAD TEST)	2000.0
2 (MECHANICAL JACK 11 TON TO 25 TON CAPACITY- LOAD TEST)	2500.0
3 (MECHANICAL JACK 26 TON TO 40 TON CAPACITY- LOAD TEST)	3500.0

374

National Test House (ER), Kolkata

IS 1717 : 2018 (2018) - Metallic Materials - Wire - Simple Torsion Test (Fourth Revision)

Metallic Materials - Wire - Simple Torsion Test (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Annex B (Evaluation of Fracture Occurring during Simple Torsion Test - Visual)	1000.0
1 (Metallic Materials - Simple Torsion Test-Wire ( Number of Turns))	1000.0

375

National Test House (ER), Kolkata

IS 1755:2018 (2018) - Metallic Materials - Wire - Wrapping test

Metallic Materials - Wire - Wrapping test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Metallic Materials - Wire -Wrapping test)	1000.0

376

National Test House (ER), Kolkata

IS 1598 : Part 1 (2020) - Metallic Materials — Izod Pendulum IMPact Test

Metallic Materials — Izod Pendulum IMPact Test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (Impact Test with sample preparation)	5000.0

377

National Test House (ER), Kolkata

IS 778 (1984) - Specification for 2010 copper alloy gate, globe and check valves for waterworks purposes (Fourth Revision)

Specification for 2010 copper alloy gate, globe and check valves for waterworks purposes (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Chemical Analysis)	3000.0
9 (Hydrostatic Test)	5000.0
8 (Dimensions)	1000.0

378

National Test House (ER), Kolkata

781 (1984) - SPECIFICATION FOR CAST COPPER ALLOY SCREW DOWN BIB TAPS AND STOP VALVES FOR WATER SERVICES

SPECIFICATION FOR CAST COPPER ALLOY SCREW DOWN BIB TAPS AND STOP VALVES FOR WATER SERVICES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Dimension, mm)	2000.0
4 (Chemical Composition)	5000.0
0 (Measurement of Weight)	1000.0
0 (Hydrostatic Test of Body)	5000.0

379

National Test House (ER), Alipore

IEEE-Std C 57.12.28- 2023 (2023) - IEEE-Std for Pad - Mounted Equipment.

IEEE-Std for Pad - Mounted Equipment.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.5.1 (Cross Hatch Adhesion)	2000.0
5.5.2 (Humidity ( 1000 hrs))	18000.0
5.5.3 (Impact Test)	2700.0
5.5.4 (Insulating Fluid Resistance)	4000.0
5.5.5 (Ultra Violet Accelerated Weathering (QUV 500 hrs))	25000.0
5.5.7 (Abrasion Resistance (3000 cycle))	12000.0

380

National Test House (SR), Chennai

IS 2720 - Methods of Tests for Soils

Methods of Tests for Soils

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Grain size analysis- (IS 2720(Part 4):1985)	5000.0
2 (Determination of Liquid limit-(IS 2720(Part 5):1985))	1000.0
3 (Determination of Plastic Limit(IS 2720(Part 5):1985))	1000.0
4 (Determination of Plasticity Index-(IS 2720(Part 5):1985))	500.0
5 (Determination of Water Content-Dry density relation using light compaction (IS 2720(Part 7):1980))	5000.0
6 (Determination of Water Content-Dry density relation using heavy compaction (IS 2720(Part 8):1983))	5000.0
7 (Laboratory determination of CBR (IS 2720(Part 16):1987))	4000.0
8 (Determination of Uniformity coefficient(Cu): (IS 1498:1970))	1500.0
9 (Determination of Coefficient of Curvature(Cc): (IS 1498:1970))	1500.0
10 (Determination of Shrinkage limit (IS 2720(6)1972))	1000.0
- (Bulk density)	1000.0
- (Void ratio)	1000.0
- (Type of Soil-Classification & Identification of Soil (IS 1498:1970))	2000.0
- (Free swell index (Methods of test for soils: IS 2720 (Part 40) : 1977 Reviewed In : 2021))	1000.0
- (Moisture content (IS:2720(Part 2):1973))	1000.0
- (Organic matter- (IS 2720(22):1972))	1200.0
- (Calcium carbonate)	1200.0
- (pH)	1000.0
- (Total Soluble sulphates)	2000.0
Soil Class (Soil Class)	5000.0
13 (Direct Shear Test (IS : 1720 ( Part 13 ) - 1986 ))	1500.0

381

National Test House (NR), Ghaziabad

IEC 60076 - 3 (2018) - Power Transformers - Insulation Levels, Dielectric Tests & External Clearances in Air

Power Transformers - Insulation Levels, Dielectric Tests & External Clearances in Air

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
14 (Lightning Impulse Voltage Withstand Test)	100000.0

382

National Test House (WR), Mumbai

General RDSO Specification NTH WR - General RDSO Specification NTH WR [-]

General RDSO Specification NTH WR

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
General RDSO Specification NTH WR (Painting system of FRP Components- MTDS: 118 REV 01: - 2-Component polyurethane Base Primer)	15900.0
General specification RDSO (Painting system of FRP Components- MTDS: 118 REV 01: - 2-Component polyurethane Base Primer for 12 months Keeping properties)	10000.0

383

National Test House (WR), Mumbai

NTH(WR)/MECH/CUSTOM/029 (2025) - Student Bench - Specification for Student Bench

Specification for Student Bench

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Type of Seating, Suitable for age group, Number of Seating Capacity Desk with Self (Under Storage) Height, Width and Length MS Pipe Size, MS Pipe gauge (Thickness), MS Pipe Frame size Supportign MS Pipe and Supporting Angle size BEJ Type SAG Border Patti Writing Pad Bag Bad Back Hight, Back Length Color of Buch Fitting Type Finishing)	6500.0

384

National Test House (NWR), Jaipur

IS 14735 (1999) - UNPLASTICIZED POLYVINYL CHLORIDE (UPVC) INJECTION MOULDED FITIINGS FORSOIL AND WASTE DISCHARGE SYSTEM FORINSIDE AND OUTSIDE BUILDINGS INCLUDING VENTILATION AND RAIN WATER SYSTEM- SPECIFICATION

UNPLASTICIZED POLYVINYL CHLORIDE (UPVC) INJECTION MOULDED FITIINGS FORSOIL AND WASTE DISCHARGE SYSTEM FORINSIDE AND OUTSIDE BUILDINGS INCLUDING VENTILATION AND RAIN WATER SYSTEM- SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
14 (Titanium Dioxide Content)	2000.0
15 (Sulphated Ash Content)	2000.0

385

National Test House (NWR), Jaipur

IS 15965 : 2012 (2012) - Pre-painted Aluminium Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain)

Pre-painted Aluminium Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Tensile Strength (As per IS 15961), MPa)	1000.0
7.1 (Mass of Coating (Both sides), g/m²)	2000.0
8 (Yield Strength (As per IS 15961), MPa)	1000.0

386

National Test House (WR), Mumbai

NTH(WR)/MECH/CUSTOM/028 (2025) -Breathing Air Compressor (2025) - High Pressure, 3 Stage, Reciprocating type, Air cooled, Oil Lubricated Breathing Air Compressor

High Pressure, 3 Stage, Reciprocating type, Air cooled, Oil Lubricated Breathing Air Compressor

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Acceptance Test -Customer Specification: (Ref, Stanadrd IS 15879:2009 and Customer Acceptance Test Procedure Annexure-A , B & C) 1. Specification Check - Scope Verification and Air flow diagram verification (As per sketch) 2. Weights and Measures 3. Records of Test Run Parameters- Medium, Intake pressure, Final discharge Pressure, 3. a.Air Leak test- Leak detector spray Method 3.b. Noise / sound level HP air compressor- ≤85 db(A) at a distance of 1meter 3.c Calculated capacity LPM - Customer Specified Method 4. Record of Functional Test - Safety Relief Valve ( 330 bar +/- 10% and 225 bar +/- 10%), Functioning of Condensate drain)	28000.0
2 (Acceptance Test Procure reference with IS 15879:2009 Verification of material of construction - Method of Checking Magnetic or Non Magnetic Type Crankcase, Cylinders,Cylinder Heads, Crankshaft, Connecting rods, Pistons, Valves and Flywheel)	8000.0

387

National Test House (SR), Chennai

10702 (2023) - Hawai Chappal - Specification

Hawai Chappal - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.0 (Test results - Hawai Chappal)	10000.0

388

National Test House (NWR), Jaipur

IS 5484 (2023) - EC Grade AluminIum rod produced by continuous casting and rolling

EC Grade AluminIum rod produced by continuous casting and rolling

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (Elongation)	1000.0
9 (Ultimate Tensile Strength)	2000.0
6 (Aluminium)	500.0
6 (Silicon)	500.0
6 (Iron)	500.0
6 (Manganese)	500.0
6 (Chromium)	500.0
6 (Titanium)	1000.0
6 (Vanadium)	500.0
6 (Copper)	30.0
6 (Zirconium)	500.0
11 (Dimension)	1000.0
12 (Finish and freedom from defects)	1000.0
10 (Resistivity at 20 Deg. C)	2000.0
10.1 (Conductivity)	2000.0

389

National Test House (NR), Ghaziabad

ASME SEC II Part C (2025) (2025) - ASME Boiler and Pressure vessel code - specifications for Welding Rods, Electrodes, and Filler Metals

ASME Boiler and Pressure vessel code - specifications for Welding Rods, Electrodes, and Filler Metals

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11 (Radiography)	1000.0

390

National Test House (NR), Ghaziabad

12744 part 1 2013 - RMP Paint Red Oxide Zinc Phosphate Primimg

RMP Paint Red Oxide Zinc Phosphate Primimg

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (PLEASE SEE ANNEXURE)	8000.0