NTH - Management Information System

Search by Standard No.

Reset

3858 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

421

National Test House (NR), Ghaziabad

NTH/NR/RPPT/IGNOU/Text Paper (2025) - Text Paper Specification

Text Paper Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
As per IS 1848 (Part-1):2018 (Results of Tests)	168000.0

422

National Test House (NWR), Jaipur

303 (2024) - Plywood for General Purpose

Plywood for General Purpose

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

423

National Test House (ER), Alipore

P-6 EIL SPEC B224-000-79-41-PLS-01 REV6 (2021) - P-6 HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS Technical Name :Epoxy zinc phosphate primer

P-6 HRRL JOB SPECIFICATION FOR SURFACE PREPARATION AND PROTECTIVE COATINGS Technical Name :Epoxy zinc phosphate primer

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume soilds %)	2000.0
2 (DFT per coat microns)	100.0
3 (Theoretical covering capacity in m sq/coat/litre)	1000.0
4 (Touch dry at 30 Deg c max (hours))	1000.0
5 (Hard dry at 30 deg C max(hours))	1000.0
6 (Over coating interval , hours)	1000.0
7 (Potlife at 30 deg C for 2 comp paints, hours)	1000.0
8 (Adhesion ASTM D 4541 (Mpa))	5000.0
9 (Temperature resistance min deg C 80 METHOD A ASTM D2485)	3000.0
10 (Non Volatile Matter % By mass Component-A (Base))	1000.0
11 (Non Volatile Matter % By mass Component-B (Hardener))	1000.0
12 (Volatile Matter % By mass Component-A (Base))	500.0
13 (Volatile Matter % By mass Component-B (Hardener))	500.0
14 (Specific Gravity Component-A (Base))	500.0
15 (Specific Gravity Component-B (Hardener))	500.0
16 (Ash content Component-A (Base))	1000.0
17 (Ash Content % By mass Component-B (Hardener))	1000.0
10 (weight per litre in kg/litre)	500.0
1 ()	-

424

National Test House (NWR), Jaipur

IS 13730(Part-9):1994,Reaffirmed 2005. (1994) - Specification for Particular Types of Winding Wires:Polyester Enamelled Round Aluminium Wire, Class 130

Specification for Particular Types of Winding Wires:Polyester Enamelled Round Aluminium Wire, Class 130

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Dimensions)	1000.0
5 (Electrical Resistance)	2000.0
6 (Elongation)	9000.0
Tests (i)Measurement of diameter of conductor, ii)Measurement of increase in diameter,iii)Measurement of overall diameter,iv)Mandrel Winding Test,v)Weight check.)	4500.0

425

National Test House (NWR), Jaipur

CSD-TDS Samples (2023-12) - CSD TDS ALL Index

CSD TDS ALL Index

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
63 (As per Annexure)	10000.0

426

National Test House (SR), Chennai

IS/RDSO-GE/0001:2023 - SPECIFICATIONS FOR TRACK BALLAST

SPECIFICATIONS FOR TRACK BALLAST

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2.2.1 (Aggregate Abrasion Value -Annexure-I & IS 2386 (Part IV-1963))	1500.0
2.2.1 (Aggregate Impact Value:(Annexure -II & IS:2386 (Part IV):1963))	1500.0
2.2.3 (Water absorption (Annexure-III & IS 2386 (Part III-1963))	1000.0
2.3 (Size and gradation-(Annexure IV))	2000.0

427

National Test House (NWR), Jaipur

IS 15931 (2012) - Solid Panel Foam UPVC Door Shutters - Specification

Solid Panel Foam UPVC Door Shutters - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.1 (Dimensions (Width, Height and thickness), in mm)	1000.0
10.1 (Squareness Test)	500.0
10.2 (General Flatness, in mm)	1000.0
10.3 (Impact Indentation Test,)	1000.0
10.4 (Edge Loading Test)	1500.0
10.5 (Shock Resistance Test [ Cl. 2.1 of IS 4020 (Part 8)])	1500.0
10.6 (Buckling Resistance Test, in mm)	1500.0
10.7 (Slamming Test,)	1000.0
10.8 (Misuse Test)	1000.0
10.9 (Screw Withdrawal Test,)	1000.0

428

National Test House (NR), Ghaziabad

IS 13015 (1991) - Steel products - Macroetch testing, inspection and rating - Specification

Steel products - Macroetch testing, inspection and rating - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Metallography-Macroetch)	1000.0
6.2 (Metallography-Macroetch)	1000.0
6.3 (Metallography-Macroetch)	1000.0

429

National Test House (SR), Chennai

IS 12701 (1996) - Rotational moulded polyethylene water storage tanks - specification (First Revision)

Rotational moulded polyethylene water storage tanks - specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3,4,5,6&7 (Water Storage Tank Test Results)	14000.0
7.6 (Overall Migration)	3000.0
9.1 (Carbon Black content)	2000.0
9.1 (Carbon Black Dispersion)	1000.0

430

National Test House (WR), Mumbai

Customized Specification for DWC Pipes - Customized Specification for DWC Pipes

Customized Specification for DWC Pipes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Dimensions)	1000.0
- (Compression test)	2000.0

431

National Test House (WR), Mumbai

Customized Specification for UPVC Window frame - Customized Specification for UPVC Window frame

Customized Specification for UPVC Window frame

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Thickness)	1000.0
- (Density)	1000.0
- (Shore D Hardness)	1000.0
- (Heat Ageing)	2000.0
- (Heat Reversion)	2000.0
- (Water absorption)	2000.0
- (Volume Resistivity)	3000.0
- (Material Identification by FTIR)	2000.0
- (Profile mass)	1000.0
- (Vicat Softening Point)	2000.0

432

National Test House (ER), Kolkata

IS 15477 (2019) - Adhesives for Use with Ceramic, Mosaic and Stone Tiles- Specification (First Revision)

Adhesives for Use with Ceramic, Mosaic and Stone Tiles- Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.5 (Slip Resistance (For vertical application only)-Annex E of IS 15477:2019)	3000.0
5.4 (Adjustment Time-Annex D of IS 15477:2019)	2000.0
5.3 (Open time-Annex C of IS 15477:2019)	2000.0
5.2, Table 1, Sl No (ii)-(a) (Shear adhesion Strength-(Dry Condition)-Annex B of IS 15477:2019)	3000.0
5.1, Table 1, Sl No (i)-(a) (Tensile adhesion Strength(Dry Condition)-Annex A of IS 15477:2019)	3000.0
5.6 (Deformability (for Vertical Application only)-Annex F of IS 15477:2019)	3000.0
5.1, Table 1, Sl No (i)-(b) (Tensile adhesion Strength (Wet Condition)-Annex A of IS 15477:2019)	3000.0
5.2, Table 1, Sl No (ii)-(c) (Shear adhesion Strength, (Wet condition)-Annex B of IS 15477:2019)	3000.0
5.2, Table 1, Sl No (ii)-(b) (Shear adhesion Strength, (Heat aging condition)-Annex B of IS 15477:2019)	3000.0

433

National Test House (WR), Mumbai

IS 17190:2020 - GROUTS FOR FILLING OF JOINTS OF TILES AND STONES

GROUTS FOR FILLING OF JOINTS OF TILES AND STONES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Clause 4,Table 1 (Linear shrinkage)	2000.0
Clause 4,Table 1 (Water absorption)	1000.0
Clause 4,Table 1 (Compressive strength)	4000.0
Clause 4,Table 1 (Flexural strength)	4000.0
Clause 4,Table 1 (Abrasion resistance)	5000.0
Clause 4,Table 1 (Transverse deformation)	2000.0
custom (GROUTS FOR FILLING OF JOINTS OF TILES AND STONES-(CEMENTITIOUS & RESIN GROUTS))	18000.0
custom (Custom-Chemical resistance properties)	2500.0

434

National Test House (SR), Chennai

CUSTOM/SCRIM REINFORCED POLYETHYLENE WITH MANO FILAMENT/2025 - SCRIM REINFORCED POLYETHYLENE WITH MANO FILAMENT

SCRIM REINFORCED POLYETHYLENE WITH MANO FILAMENT

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Mass per unit area)	1000.0
2.0 (Tensile Force (MD))	1000.0
3.0 (Tensile Force (CD))	1000.0

435

National Test House (SR), Chennai

IS 17190:2020 - GROUTS FOR FILLING OF JOINTS OF TILES AND STONES

GROUTS FOR FILLING OF JOINTS OF TILES AND STONES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Clause 4,Table 1 (Linear shrinkage)	2000.0
Clause 4,Table 1 (Water absorption)	1000.0
Clause 4,Table 1 (Compressive strength)	4000.0
Clause 4,Table 1 (Flexural strength)	4000.0
Clause 4,Table 1 (Abrasion resistance)	5000.0
Clause 4,Table 1 (Transverse deformation)	2000.0
custom (GROUTS FOR FILLING OF JOINTS OF TILES AND STONES-(CEMENTITIOUS & RESIN GROUTS))	18000.0
custom (Custom-Chemical resistance properties)	2500.0

436

National Test House (SR), Chennai

IS 458:2021 - PRECAST CONCRETE PIPES(WITH AND WITHOUT REINFORCEMENT)

PRECAST CONCRETE PIPES(WITH AND WITHOUT REINFORCEMENT)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.1 & 8.2 (Dimensions & Tolerances)	1000.0
9 (Workmanship and Finish)	1000.0
10.2(b) (Three-edge bearing test)	5000.0
10.2(c) (Permeability test)	3000.0

437

National Test House (NR), Ghaziabad

IS 1720 (1978) - COTTON SEWING THREADS

COTTON SEWING THREADS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table-1 (Nominal Count)	2000.0
Table-1 (Construction)	1000.0
Table-1 (Length)	2000.0
Table-1 (Single Thread Breaking Load)	2000.0

438

National Test House (SR), Chennai

14276 (2016) - Cement Bonded Particle Boards — Specification

Cement Bonded Particle Boards — Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Finish)	500.0
7 (Dimensions and Tolerances)	1000.0
10.3 (Density)	1000.0
10.4 (Moisture Content)	1000.0
10.5 (Water Absorption)	1000.0
10.6 (Swelling in water)	1000.0
10.7 (Modulus of Rupture (MOR))	1500.0
10.8 (Modulus of Elasticity (MOE))	1500.0
10.9 (Tensile Strength perpendicular surface)	1500.0
10.10 (Screw withdrawal strength)	1000.0
8.5 (Workability)	500.0
custom (Surface alkalinity, pH)	1200.0
custom (Compressive strength (Perpendicular to surface))	2000.0
Table 1 (Clauses 8.2, 8.3, 8.4,10.1 and 10.3 to 10.10) (Requirements of Physical & Mechanical Properties for Cement Bonded Particle Boards)	11000.0

439

National Test House (SR), Chennai

GFRC - on the lines of ASTM C947-03 - Glass Fiber Reinforced Concrete

Glass Fiber Reinforced Concrete

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
custom (Dry Density, Water absorption, Bending strength-LOP/MOE & MOR)	10000.0

440

National Test House (WR), Mumbai

- - Custome spec for additional requirement -Admixture & Adhesive (Chem NTH-WR)

Custome spec for additional requirement -Admixture & Adhesive (Chem NTH-WR)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Dry Material content)	1000.0
- (Chloride Content)	1000.0
- (Ash Content)	1000.0
- (pH)	1000.0
- (Relative Density)	1000.0
- (Viscosity by ford cup)	1000.0
- (Identification by FTIR)	2000.0
- (Solid content)	1000.0

441

National Test House (ER), Alipore

IS 16676 (2017) - Solventless liquid epoxy system for application on interior and exterior surfaces of steel water pipeline - Specification

Solventless liquid epoxy system for application on interior and exterior surfaces of steel water pipeline - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Condition)	1200.0
6.2 (Thinning)	1200.0
6.3 (Application Properties)	1200.0
6.4 (Recoating Properties)	1200.0
6.5 (Consistency)	1200.0
6.7 Table 1 I (Thickness, dry film, Min)	1200.0
II (Electrical insulation (holidays))	2500.0
III (a) (Adhesion Test a)Tape Test)	1200.0
III (b) (Adhesion Test b)Pull off Test.)	2500.0
IV (a) (Immersion & vapour phase a) De-ionized water)	2000.0
IV (b) (Immersion & vapour phase b) Sulphuric acid pass 1 percent by weight.)	2000.0
IV (c) (Immersion & vapour phase c) Sodium hydroxide pass 1 percent by weight)	2000.0
V (Abrasion Resistance, Max)	2000.0
Vi (Cathodic Disbondment Test, Max)	2000.0
Vii (Solvent Rub Test)	1200.0
Viii (Drinking Water Test As per ANNEX)	5000.0
- (Color)	1200.0
- (Appearance)	1200.0

442

National Test House (ER), Alipore

IS 16719 (2022) - Polyurethane coatings for the interior and exterior of steel pipe and fittings - Specification

Polyurethane coatings for the interior and exterior of steel pipe and fittings - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
xii) (Flexibility (180º bend over 6.25 mm diameter rod))	1200.0
xi) (Salt Spray, 5 percent NaCl (see Note))	100000.0
ix) (Impact resistance, Min)	2500.0
viii) (Hardness, Min)	2500.0
viii) (Cathodic disbondment test, Max)	2500.0
vi) (Abrasion resistance, Max)	2500.0
v) (c) (c)Sodium hydroxide pass 1 percent by weight)	2500.0
v) (b) (b) Sulphuric acid pass 1 percent by weight)	2500.0
v) (a) (a) De-ionized water pass)	2500.0
iv) (b) (b) Pull off Test, Min)	2500.0
iv) (a) (a) Tape test)	1200.0
iii) (Electrical insulation (holidays))	2500.0
ii) (Thickness, dry film(Internal &External application))	1200.0
6.6 Table 1 i) (Drying time at 50 ºC, h, Max Tack free)	1200.0
6.5 (Lead Restriction)	2500.0
6.3 (Consistency)	1200.0
6.2 (Recoating Properties)	1200.0
6.1 (Application Properties)	1200.0

443

National Test House (Satellite Centre), Varanasi

IS 4229 (1992) - Textiles – Nylon sewing threads for aerospace purposes – Specification (second revision)

Textiles – Nylon sewing threads for aerospace purposes – Specification (second revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's request (Average Breaking Strength, N)	2000.0
Firm's request (Elongation at break , percent)	1000.0

444

National Test House (NER), Guwahati

IS 15965 : 2012 (2012) - Pre-painted Aluminium Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain)

Pre-painted Aluminium Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.3 (Total Coated Thickness (As received condition), mm)	1000.0
7.1 (Mass of Coating (Both sides), g/m²)	2000.0
5 (Chemical composition (As per IS 513), % by mass)	2500.0

445

National Test House (NR), Ghaziabad

IS 9143:1979 - Indian standard-Method for the determination of Unconfined Compressive strength of Rock materials

Indian standard-Method for the determination of Unconfined Compressive strength of Rock materials

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Unconfined Compressive strength /Uniaxial Compressive strength-N/ Sq mm)	5000.0

446

National Test House (ER), Kolkata

435 - SPECIFICATION FOR CASTOR OIL

SPECIFICATION FOR CASTOR OIL

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.3 (Colour in 1 In Cell on lovibond scale in terms of (Y+5R))	1000.0
4.3 (Relative density at 30 dg.C)	1000.0
4.3 (Refractive Index at 40 dg C)	1000.0
4.3 (Critical solution temperature)	1000.0
4.3 (Acid value)	1000.0
4.3 (Saponification value)	1000.0
4.3 (Unsaponifiable matter)	1000.0
4.3 (Iodine value)	1000.0
4.3 (Moisture and volatiles)	1000.0

447

National Test House (ER), Alipore

CUSTOMER SPECIFICATION PAINT LAB (0) - CUSTOMER SPECIFICATION PAINT LAB

CUSTOMER SPECIFICATION PAINT LAB

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Dry film thickness)	1200.0
9 (Gloss)	1200.0
7 (Pencil hardness test)	1500.0
6 (Impact resistance test)	1500.0
5 (Cross hatch adhesion test)	1500.0
10 (Salt Spray (ASTM B117) 100 hrs)	5000.0
8 (Bend Test)	1200.0

448

National Test House (NR), Ghaziabad

IS 894 (1980) - Specification For Handloom Wool Blankets Brick Red (First Revision)

Specification For Handloom Wool Blankets Brick Red (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1 (Ends/dm)	1000.0
3.1 (Picks/dm)	1000.0
3.1 (Breaking load (Warp))	1000.0
3.1 (Breaking Load (Weft))	1000.0
3.1 (Type of Weave)	1000.0
3.2 (Scouring loss)	2000.0
Firm's request (Stitches per cm)	1000.0
Firm's request (Fiber Composition)	2000.0
Firm's request (Colour of the Blanket)	500.0

449

National Test House (Satellite Centre), Varanasi

IS 1848(Part 1):2018 and IS 1848 - Cream wove and Cream laid paper

Cream wove and Cream laid paper

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Weight/Grammage(g/sq.m.))	1000.0

450

National Test House (ER), Alipore

Custom Paint 2025 - Custom Paint System

Custom Paint System

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Pull out Test of paint coating on cementitious surface)	2000.0
2 (Accelerated Weathering Test for 96 hrs)	4800.0
3 (Water Permeability Test)	5000.0
4 (BS 476 Part 7 & Customers Specification)	10000.0
5 (Pull of adhesion)	5000.0
6 (Abrasion Resistance)	5000.0
7 (Water absorption /resistance to Water test)	1200.0
8 (Tensile strength)	2000.0
9 (Chemical Resistance Tests (24 hrs))	10000.0