| 3571 |
National Test House (NWR), Jaipur
| IS 383:2016 (for Coarse aggregates) (2016) - Coarse and fine aggregate for Concrete for concrete-Specification |
Coarse and fine aggregate for Concrete for concrete-Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Test for Size and Grading of Aggregate (IS:2386(part -1)1963)) |
2000.0 |
|
|
| 3572 |
National Test House (NWR), Jaipur
| IS 383 for fine aggregate (2016) - Coarse and fine aggregate for Concrete |
Coarse and fine aggregate for Concrete |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3 (Test for Water absorption
(IS:2386(part -III)1963)) |
1000.0 |
|
|
| 3573 |
National Test House (WR), Mumbai
| Custom specification Paint coating - Custom specification Paint coating Fire retardant test as per customer requirement |
Custom specification Paint coating Fire retardant test as per customer requirement |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Custom specification for paint coating (Surface flame spreading/fire retardant test for 0 -1 hour) |
3000.0 |
|
| Custom specification for paint coating (surface flame spreading/fire retardant test for 1 - 2 hours) |
5000.0 |
|
| Custom specification fire retardant paint-4 Hrs. (Surface flame spreading/fire retardant test for 3 - 4 hours) |
10000.0 |
|
| Custom specification fire retardant paint-3 Hrs. (Surface flame spreading/fire retardant test 2 - 3 hours as per customer requirement) |
7000.0 |
|
|
| 3574 |
National Test House (NR), Ghaziabad
| IS 2312 (1967) - Specification for propeller type AC ventilating fans (First Revision) |
Specification for propeller type AC ventilating fans (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 2 (Terminology) |
- |
|
| 3 (Sizes) |
- |
|
| 4 (Rated Voltage) |
100.0 |
|
| 5 (Rated Frequency) |
100.0 |
|
| 6 (Design and General Construction) |
100.0 |
|
| 7 (Finish) |
100.0 |
|
| 8 (Insulating Materials) |
- |
|
| 9 (Speed Regulators) |
100.0 |
|
| 10 (Starting) |
100.0 |
|
| 11 (Interchangeability) |
100.0 |
|
| 12 (Silent Operation) |
100.0 |
|
| 13 (Marking) |
100.0 |
|
| 14.2 (Air Delivery Test at 230 V, AC,50 Hz. , Air delivery in m³/hr) |
7500.0 |
|
| 14.3 (Temperature Rise Test ) |
2000.0 |
|
| 14.11 (Test for speed and Input at 230 V, 50 Hz.) |
1000.0 |
|
| 14.11 ((i) Input in watts ) |
500.0 |
|
| 14.6 ((ii) Power factor ) |
500.0 |
|
| 14.12 ((iii) Maximum speed in r.p.m ) |
500.0 |
|
| 14.7 (Leakage current Test Leakage Current measured in µA) |
600.0 |
|
| 14.8 (High Voltage Test At 1500 volts rms 50Hz for one minutes for Motor between live parts and body.) |
1000.0 |
|
| 14.9 (Insulation Resistance test At 500 V DC Insulation Resistance between point of application of high voltage Fan motor.) |
1000.0 |
|
| 14.1 (Test for Earthing connection Measured earth resistance in ohms) |
500.0 |
|
| 14.13 (Flash Test) |
- |
|
|
| 3575 |
National Test House (SR), Chennai
| DKD-R 6-1 (2014) - Calibration of Pressure Gauges. |
Calibration of Pressure Gauges. |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 (Pressure (Accu: 0.50%)) |
3000.0 |
|
| 7 (Pressure (Accu: 0.25%)) |
4000.0 |
|
|
| 3576 |
National Test House (SR), Chennai
| IS 101 : Part 3 : Sec 5 Hegman Gauge (2022) - Method of sampling and test of paints varnishes and related products Part 3 Test on paint film formation Section 5 Determination of fineness of grind Fifth Revision (Hegman Gauge) |
Method of sampling and test of paints varnishes and related products Part 3 Test on paint film formation Section 5 Determination of fineness of grind Fifth Revision (Hegman Gauge) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.1.1.1 (Hegman gauge - Length) |
1500.0 |
|
|
| 3577 |
National Test House (SR), Chennai
| 1708 (1986) - Testing of Small Specimen of Timber |
Testing of Small Specimen of Timber |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Part 1 (Moisture Content, in %) |
1000.0 |
|
| Part 2 (Specific Gravity /Density, g/cm3) |
500.0 |
|
| Part 5 (Static Bending Strength (MoR), N/mm2) |
3000.0 |
|
| Part 8 (Compressive Strength Parallel to Grain, N/mm2) |
3000.0 |
|
| Part 9 (Compressive Strength Perpendicular to Grain, N/mm2) |
3000.0 |
|
|
| 3578 |
National Test House (NR), Ghaziabad
| 9738 (2003) - Polyethylene bag for general purpose |
Polyethylene bag for general purpose |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.3 (Average thickness) |
1000.0 |
|
| 5 (Printing Ink Adhesion test) |
1000.0 |
|
|
| 3579 |
National Test House (SR), Chennai
| IS 16491 : Part 2 (2016) - Geometrical product specifications (GPS) - Dimensional measuring equipment: Part 2 caliper depth gauges; design and metrological characteristics |
Geometrical product specifications (GPS) - Dimensional measuring equipment: Part 2 caliper depth gauges; design and metrological characteristics |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 3580 |
National Test House (WR), Mumbai
| BS:6121-1: 2005 - Armour Cable Glands |
Armour Cable Glands |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.2.2 , 4.2.1, 4.2.3 (Applicable parameters as per Annexure) |
150000.0 |
|
|
| 3581 |
National Test House (NWR), Jaipur
| IS 5405 (2019) - Sanitary napkins – Specification (second revision) |
Sanitary napkins – Specification (second revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.2 (Ability to withstand pressure after abrorption) |
1000.0 |
|
| 7.1 (pH Value) |
1000.0 |
|
| 6 (Manufacture, workmanship and finish) |
1000.0 |
|
| 5 (Dimensions / Sizes) |
500.0 |
|
| 4 (Type and Shape of Napkins) |
500.0 |
|
| 3 (Material (Cover, absorbant core, bottom sheet)) |
1000.0 |
|
| 5 (Pad Length (Absorbent core only)) |
1000.0 |
|
| 5 (Pad width (Absorbent core only)) |
1000.0 |
|
| 7.3.2 (Test for common skin Pathogen-Staphylococcus Aureus) |
2500.0 |
|
| 7.3.1 (Bacterial and fungal Bioburden) |
2500.0 |
|
|
| 3582 |
National Test House (WR), Mumbai
| IS 383 for fine aggregate (2016) - Coarse and fine aggregate for Concrete |
Coarse and fine aggregate for Concrete |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Sieve analysis/Particle size distribution ( IS:2386(part -1)1963) |
2000.0 |
|
| 2 (Test for Specific Gravity
(IS:2386(part -III)1963)) |
500.0 |
|
| 3 (Test for Water absorption
(IS:2386(part -III)1963)) |
1000.0 |
|
| 4 (Test for Bulk Density-Loose condition
( IS:2386(part -III)1963)) |
500.0 |
|
| 5 (Test for Bulk Density-Compacted condition
( IS:2386(part -III)1963)) |
500.0 |
|
| 6 (Test for Silt content- (CPWD Specification)) |
1000.0 |
|
| 7 (Deleterious Materials) |
2000.0 |
|
| 8 (Test for Soundness of Aggregate (IS 2386(Part 5):1963)) |
2000.0 |
|
| 9 (Test for Alkali aggregate reaction- Chemical method
(IS 2386(Part 7):1963)) |
3000.0 |
|
| 10 (Test for bulking of sand) |
1000.0 |
|
| 5.5 (Soundness of Aggregates [IS 2386 (Part 5)], %) |
2000.0 |
|
| Clause 5.7 Table 3 (TOTAL ALKALI CONTENT as Na2O EQUIVALENT) |
1000.0 |
|
| 5.7 TABLE 3 (TOTAL SULPHATE CONTENT as SO3) |
1000.0 |
|
| 5.7 TABLE 3 (ACID SOLUBLE CHLORIDE CONTENT) |
1000.0 |
|
| 5.2 (Organic Impurities) |
1000.0 |
|
| 13 (IS 2386 (Part 5)_Soundness (Magnesium Sulphate)) |
2000.0 |
|
|
| 3583 |
National Test House (WR), Mumbai
| ASTM D 4541 - Standard Test Method for Pull-Off Strength of coatings using portable adhesion Tester |
Standard Test Method for Pull-Off Strength of coatings using portable adhesion Tester |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| ASTM D 4541 (pull-off strength of coatings (Pull of Adhesion, ASTM D 4541)) |
2000.0 |
|
|
| 3584 |
National Test House (SR), Chennai
| NTH/WI/MC 6 (2019) - Calibration of Stage micrometer, Microscope standard kit, Microscope scale |
Calibration of Stage micrometer, Microscope standard kit, Microscope scale |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.1 (Measurement of scale graduation) |
1500.0 |
|
| 1.2 (Measurement of scale graduation) |
1500.0 |
|
| 1.3 (Measurement of scale graduation) |
1500.0 |
|
|
| 3585 |
National Test House (NR), Ghaziabad
| IS 778 (1984) - Specification for 2010 copper alloy gate, globe and check valves for waterworks purposes (Fourth Revision) |
Specification for 2010 copper alloy gate, globe and check valves for waterworks purposes (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.1 Table 1 IS: 318 (Chemical Composition (Please see Annexure. NABL)) |
8000.0 |
|
| 8.1 Table 1 IS: 319 (Chemical Composition (Please see Annexure. NABL)) |
8000.0 |
|
| IS:1264 Cl 7.1 Table 1 (Chemical Composition (Please see Annexure. NABL)) |
9000.0 |
|
| IS:1264 ;IS: 7.1 Table 1 Chemical Composition (Chemical Composition (Please see Annexure.NON- NABL)) |
1.0 |
|
| IS:318 ;3.1 Table 1 Chemical Composition (Chemical Composition (Please see Annexure.NON- NABL)) |
1.0 |
|
| 8.1 Table 1 IS: 319 Chemical Composition (Chemical Composition (Please see Annexure.) NON NABL) |
1.0 |
|
|
| 3586 |
National Test House (WR), Mumbai
| ASTM D 4541 (2017) - Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (1) |
- |
|
|
| 3587 |
National Test House (Satellite Centre), Varanasi
| IS 1848 : Part 1 (2018) - Writing and printing papers - Specification: Part 1 account book, azure lead, bond, cream laid and cream wove/printing white/printing coloured/printing offset, printing maplitho, printing white super calendered and typewriting types (Fifth Revision) |
Writing and printing papers - Specification: Part 1 account book, azure lead, bond, cream laid and cream wove/printing white/printing coloured/printing offset, printing maplitho, printing white super calendered and typewriting types (Fifth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.2 (Substance (Grammage), g/sq.m) |
1000.0 |
|
| 4.6(viii) (Smoothness Bendsten) |
2000.0 |
|
| 4.6 (vii) (Wax Pick) |
2000.0 |
|
| 4.3 (Thickness) |
1000.0 |
|
| 4.6 (Folding Endurance) |
1500.0 |
|
| 4.6 (One Minute Cobb) |
1000.0 |
|
| 4.6 (Opacity, %) |
2000.0 |
|
| 4.6 (Brightness, %) |
2000.0 |
|
| 4.5 (pH (Hot Extract)) |
1000.0 |
|
| 4.4 (Sizes and tolerance on size) |
1000.0 |
|
| 4.3 (Thickness) |
1000.0 |
|
| 4.6 (v) b (Double fold (CD)) |
750.0 |
|
| 4.6 (v) a (Double Fold (MD)) |
750.0 |
|
| 4.6 (viii)b (Smoothness Bendsten (Wire Side), ml/min) |
1000.0 |
|
| 4.6 (viii)a (Smoothness Bendsten (Top Side), ml/min) |
1000.0 |
|
| 4.6(ix) (Tear Index (CD)) |
1000.0 |
|
| 4.6 (ix) (Tear index(MD)) |
1000.0 |
|
| 4.6 (i) a (Tensile Index (CD)) |
1000.0 |
|
| 4.6 (i) (Tensile Index (MD)) |
1000.0 |
|
| Firm's Requirement (Surface Sizing) |
1000.0 |
|
| Firm's Requirement (Resistance to Feathering) |
1000.0 |
|
| Firm's request (Mechanical Pulp Content(%)) |
- |
|
|
| 3588 |
National Test House (NWR), Jaipur
| IS 4970 (1973) - Key for Identification for Commercial Timber |
Key for Identification for Commercial Timber |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (Species Identification) |
5000.0 |
|
|
| 3589 |
National Test House (WR), Mumbai
| IS 7098 : Part 2 (2011) - Crosslinked polyethylene insulated thermoplastic sheathed cables - Specification: Part 2 for working voltages from 3.3 kV up to and including 33 kV (Second Revision) |
Crosslinked polyethylene insulated thermoplastic sheathed cables - Specification: Part 2 for working voltages from 3.3 kV up to and including 33 kV (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 19.1 (i) d) (Dimensions) |
1000.0 |
|
| 8.1 (Conductor) |
100.0 |
|
| 19.2.(j) (High Voltage test at room temperature) |
1000.0 |
|
| 13.1 (Insulation) |
100.0 |
|
| 19.2.(g) (Tensile strength at break) |
1000.0 |
|
| 19.1.(xv) (Flammability Test) |
500.0 |
|
| 19.1.(iii) a) (Tensile strength at break) |
1000.0 |
|
| 19.2.(d) (Resistance of conductor-R) |
1000.0 |
|
| 19.2 (Acceptance Test) |
25000.0 |
|
| 19.2.(d) (Resistance of conductor-Y) |
1000.0 |
|
| 19.1.(vi)(g) (Thermal stability) |
5000.0 |
|
| 19.2.(d) (Resistance of conductor-B) |
1000.0 |
|
| 19.2.(d) (Resistance of conductor-Black) |
250.0 |
|
|
| 3590 |
National Test House (SR), Chennai
| 101 part 5 sec 2 (1988) - "METHODS OF SAMPLING AND TEST FOR
PAINTS, VARNISHES AND RELATED PRODUCTS"
SCRATCH HARDNESS TEST UPTO 1000 GM |
"METHODS OF SAMPLING AND TEST FOR
PAINTS, VARNISHES AND RELATED PRODUCTS"
SCRATCH HARDNESS TEST UPTO 1000 GM |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 3591 |
National Test House (SR), Chennai
| IS 101 part 6 sec 1 (1988) - "METHODS OF SAMPLING AND TEST FOR
PAINTS, VARNISHES AND RELATED PRODUCTS" SALT SPRAY FOR 96 HRS. |
"METHODS OF SAMPLING AND TEST FOR
PAINTS, VARNISHES AND RELATED PRODUCTS" SALT SPRAY FOR 96 HRS. |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 3592 |
National Test House (SR), Chennai
| Custom specification for paint as per IS 101 (1988) - Methods of Sampling and Test for Paints, Varnishes and related products |
Methods of Sampling and Test for Paints, Varnishes and related products |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 3593 |
National Test House (NR), Ghaziabad
| IS 694 (2010) - Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1100 v (Fourth Revision) |
Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1100 v (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Acceptance Tests (Conductor resistance test,Test for thickness of insulation,Tensile strength and elongation at break of insulation,Insulation resistance test,High voltage test ,Flammability test ,Oxygen index test ,Test for temperature index , Test for halogen acid gas evaluation and Test for smoke density rating )) |
30000.0 |
|
| 5 (The insulation shall be of polyvinyl chloride compound of
a) Type A — Cables for fixed installation
b) Type C — Heat-resistant cables (HR)
c) Type D — Flexible cables and cords
The insulation shall be so applied that it fits closely on the conductor. It shall be possible to remove it without damage to the insulation itself, to the conductor) |
- |
|
| 6 (Filler: Material & Application
The fillers shall be composed of one of the following or of any combination of the following:
a) A compound based on unvulcanized rubber or plastics; or
b) Natural or synthetic textiles; or
c) Paper; or
d) PVC) |
- |
|
| 7 (Binder tape (Binder tape shall consist of plastic or proof textile material.)) |
- |
|
| 8 (Sheath: Material, Colour & application of sheath
The sheath shall be polyvinyl chloride compound of the type specified for each type of cable as given below:
a) Type ST1 — cables for fixed installations
b) Type ST2 — cables sheathed with 85°C HRPVC compound
c) Type ST3 — flexible cables) |
- |
|
| 9 (Ovality) |
- |
|
| 12 (Core identification) |
- |
|
| 13 (Cable code) |
- |
|
| 15 (Packing and Marking) |
- |
|
| Table 1. iii. a. 1 (Annealing test for copper (core 1)) |
500.0 |
|
| Table 1. iii. a. 2 (Tensile test for Aluminium(core 1)) |
500.0 |
|
| Table 1. iii. a. 3 (Wrapping test for Aluminium) |
500.0 |
|
| Table 1. iii. a. 4 (Conductor resistance test (core 1)) |
1500.0 |
|
| Table 1. iii. a. 5 (Persulphate test (for tinned copper conductor only)) |
1000.0 |
|
| Table 1. iii. b (Test for overall dimension and thickness of insulation/sheath) |
1000.0 |
|
| Table 1. iii. b(2) (Minimum thickness of insulation (Core 1)) |
500.0 |
|
| Table 1. iii. b(3) (Average thickness of sheath) |
- |
|
| Table 1. iii. b(4) (Minimum thickness of sheath) |
- |
|
| Table 1. iii. b(5) (Overall dimension) |
500.0 |
|
| Table 1. iii. c.1(1) (Tensile strength for insulation(Core 1)) |
1000.0 |
|
| Table 1. iii. c.1(2) (Percentage elongation for insulation (Core 1)) |
1000.0 |
|
| Table 1. iii. c.2 (Loss of mass test for insulation (Core 1)) |
500.0 |
|
| Table 1. iii. c.3(1) (Tensile strength test after ageing for insulation(Core 1)) |
500.0 |
|
| Table 1. iii. c.3(2) (Percentage elongation after ageing for insulation(Core 1)) |
500.0 |
|
| Table 1. iii. c.3(3) (Variation of tensile strength after ageing for insulation(Core 1)) |
- |
|
| Table 1. iii. c.3(4) (Variation in percentage elongation after ageing for insulation (Core 1)) |
- |
|
| Table 1. iii. c.4 (Shrinkage test for insulation(Core 1)) |
500.0 |
|
| Table 1. iii. c.5 (Heat shock test for insulation(Core 1)) |
250.0 |
|
| Table 1. iii. c.6 (Hot deformation test for insulation(Core 1)) |
250.0 |
|
| Table 1. iii. c.7 (Thermal stability test for insulation(Core 1)) |
500.0 |
|
| Table 1. iii. c.8 (Cold bend test for insulation(Core 1)) |
1000.0 |
|
| Table 1. iii. c.9 (Cold impact test for insulation(Core 1)) |
1000.0 |
|
| Table 1. iii. c.10(1) (Flammability test for insulation-Unaffected portion from the lower edge the top clamp(Core 1)) |
500.0 |
|
| Table 1. iii. c.10(2) (Flammability test for insulation-Period of burning (Core 1)) |
750.0 |
|
| Table 1. iii. c.11 (The Oxygen index for insulation(Core 1)) |
5000.0 |
|
| Table 1. iii. c.12 (Test temperature index for insulation(Core 1)) |
5000.0 |
|
| Table 1. iii. c.13 (Test for halogen acid gas evaluation for insulation (Core 1)) |
5000.0 |
|
| Table 1. iii. c.14 (Smoke density test for insulation (Core 1)) |
5000.0 |
|
| Table 1. iii. d.1(1) (Tensile strength for sheath) |
- |
|
| Table 1. iii. d.1(2) (Elongation test for sheath) |
- |
|
| Table 1. iii. d.2 (Loss of mass test for sheath) |
- |
|
| Table 1. iii. d.3(1) (Tensile strength after ageing for sheath) |
- |
|
| Table 1. iii. d.3(2) (Percentage Elongation after ageing for sheath) |
- |
|
| Table 1. iii. d.3(3) (Variation in tensile strength after ageing for sheath) |
- |
|
| Table 1. iii. d.3(4) (Variation in percentage elongation after ageing for sheath) |
- |
|
| Table 1. iii. d.4 (Shrinkage test for sheath) |
- |
|
| Table 1. iii. d.5 (Heat shock test for sheath) |
- |
|
| Table 1. iii. d.6 (Hot deformation test for sheath) |
- |
|
| Table 1. iii. d.7 (Thermal stability for sheath) |
- |
|
| Table 1. iii. d.8 (Oxygen index for sheath) |
5000.0 |
|
| Table 1. iii. d.9 (Test for temperature index for sheath) |
5000.0 |
|
| Table 1. iii. d.10 (Test for halogen acid gas evaluation for sheath) |
5000.0 |
|
| Table 1. iii. d.11 (Smoke density rating for sheath) |
5000.0 |
|
| Table 1. iii. d.12 (Cold bend test for sheath) |
- |
|
| Table 1. iii. d.13 (Cold impact test(for sheath)) |
- |
|
| Table 1. iii. e.1(1) (High voltage test (water immersion test)) |
3000.0 |
|
| Table 1. iii. e.1(2) (High voltage test DC (Core 1)) |
1000.0 |
|
| Table 1. iii. e.3 , ii.g (Insulation resistance test) |
2000.0 |
|
| Table 1. iii. e.3 , ii.g (Insulation resistance test) |
2000.0 |
|
| Table 1. iii. e.3 , ii.g (Insulation resistance test) |
2000.0 |
|
| Table 1. iii. e.3 , ii.g (Insulation resistance test) |
2000.0 |
|
| Table 1. iii. e.4 (High voltage test (Cl. 10.2)(at room temperature)) |
1500.0 |
|
| Table 1. iii. e.4(1) (Flammability Test on complete cable -Period of burning) |
500.0 |
|
| Table 1. iii. e.4(2) (Flammability test on complete cable-Unaffected portion) |
750.0 |
|
| Table 1. iii. e.5 (Additional Ageing Test (for Cables for Outdoor Use)) |
3000.0 |
|
| Table 1. iii. e.5(1) (High Voltage Test after additional ageing) |
- |
|
| Table 1. iii. e.5(2) (Cold bend or cold impact test after additional ageing) |
- |
|
| Table 1. iii. (Type tests) |
40000.0 |
|
| Table-1,Sl.No(ii) (Core identification,Cable code,Packing and Marking,Conductor resistance test,Test for thickness of insulation,High voltage test AC (water immersion test) and Insulation resistance test.) |
7500.0 |
|
| -- (ILC Tests) |
- |
|
| Sl.No.(ii),(g) (Insulation Resistance Test) |
6000.0 |
|
| SlNo(ii)(g) (Insulation Resistance Test-Single Core) |
2000.0 |
|
| -- (Insulation Resistance and Flammability) |
2500.0 |
|
| Tests (Conductor Resistance and Insulation Resistance Test) |
3500.0 |
|
| Tests (Tests) |
20000.0 |
|
| Insulation Resistance Test & Tensile strength and elongation at break (Insulation Resistance Test and Tensile strength and elongation at break) |
3500.0 |
|
| Test (Insulation Resistance and High Voltage Test) |
5000.0 |
|
| DAMB Tests (Tests) |
29000.0 |
|
| Test (Insulation Resistance Test) |
8000.0 |
|
| --- (Insulation Resistance and Flammability Tests) |
6500.0 |
|
| Tests (Conductor resistance test, Test for overall dimension and thickness of insulation/sheath, Test for halogen acid gas evaluation for insulation, Smoke density test for insulation, Insulation Resistance and High Voltage Test.) |
17500.0 |
|
| Additional Core(3core) (---) |
6000.0 |
|
| Type Tests,Category-01. (Tests) |
20998.0 |
|
|
| 3594 |
National Test House (ER), Kolkata
| IS 5287 (2005 RA2020) - ALCOHOLIC DRINKS — COUNTRY SPIRIT (DISTILLED) |
ALCOHOLIC DRINKS — COUNTRY SPIRIT (DISTILLED) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 (Ethyl Alcohol Content % by volume) |
2000.0 |
|
| 7.2 (Freedom from Sedimentation and Harmful Ingredients) |
100.0 |
|
| 7.3 (Freedom from Added Colouring Matter) |
500.0 |
|
| 7.4 (Taste and Aroma) |
500.0 |
|
| 7.5 Table 1 (i) (Residue on evaporation) |
300.0 |
|
| 7.5 Table 1 (ii) (Total acids as tartaric acid) |
500.0 |
|
| 7.5 Table 1 (iii) (Volatile acids as acetic acid) |
500.0 |
|
| FSSAI (Arsenic) |
500.0 |
|
| 7.5 Table 1 (iv) (Esters as ethyl acetate) |
1000.0 |
|
| 7.5 Table 1 (v) (Higher alcohols as amyl alcohol) |
500.0 |
|
| 7.5 Table 1 (vi) (Aldehydes as acetaldehyde) |
500.0 |
|
| 7.5 Table 1 (vii) (Furfural) |
500.0 |
|
| 7.5 Table 1 (viii) (Copper (as Cu)) |
500.0 |
|
| 7.5 Table 1 (ix) (Methyl alcohol) |
600.0 |
|
| FSSAI (Lead) |
500.0 |
|
| FSSAI (Mercury) |
500.0 |
|
| FSSAI (Cadmium) |
500.0 |
|
| 7.1 (Ethyl Alcohol Content % by volume) |
2000.0 |
|
| 7.5 Table 1 (i) (Residue on evaporation) |
300.0 |
|
| 7.5 Table 1 (ix) (Methyl alcohol) |
600.0 |
|
| 7.5 Table 1 (vi) (Aldehydes as acetaldehyde) |
500.0 |
|
| 7.5 Table 1 (iv) (Esters as ethyl acetate) |
1000.0 |
|
| 7.5 Table 1 (ii) (Total acids as tartaric acid) |
500.0 |
|
| 7.5 Table 1 (iii) (Volatile acids as acetic acid) |
500.0 |
|
| 7.5 Table 1 (vii) (Furfural) |
500.0 |
|
| 7.3 (Freedom from Added Colouring Matter) |
500.0 |
|
| 7.4 (Taste and Aroma) |
500.0 |
|
| 7.5 Table 1 (viii) (Copper (as Cu)) |
500.0 |
|
| 7.5 Table 1 (v) (Higher alcohols as amyl alcohol) |
500.0 |
|
|
| 3595 |
National Test House (WR), Mumbai
| Polymer Identification by FTIR Method - Fourier-transform infrared spectroscopy (FTIR) instrumental technique for identification |
Fourier-transform infrared spectroscopy (FTIR) instrumental technique for identification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| FTIR Method (Polymer Identification by FTIR Method / Library) |
2000.0 |
|
|
| 3596 |
National Test House (WR), Mumbai
| Custom specification for paint as per IS 101 (1988) - Methods of Sampling and Test for Paints, Varnishes and related products |
Methods of Sampling and Test for Paints, Varnishes and related products |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| (Part 4/Sec 3):1988 (Optical Tests: Light Fastness Test for 100 hrs) |
5000.0 |
|
| Thickness (Coating Thickness) |
1200.0 |
|
| Water absorption (Water absorption) |
1.0 |
|
| Water Repellency test (Water Repellency test) |
1.0 |
|
|
| 3597 |
National Test House (WR), Mumbai
| IS 1148 (2009) - Steel Rivet Bars (medium And High Tensile)--For Structural Purposes--For Structural Purposes |
Steel Rivet Bars (medium And High Tensile)--For Structural Purposes--For Structural Purposes |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 11 (Yield Stress ( Medium) - 6mm up to and including 12mm) |
1000.0 |
|
| 11 (Yield Stress (Medium)- Over 12mm up to and including 20mm) |
1000.0 |
|
| 11 (Yield Stress (Medium)- Over 20 mm up to and including 40mm) |
1000.0 |
|
| 11 (Tensile Strength (Medium)) |
1000.0 |
|
| 11 (Elongation ( Medium Tensile Steel)) |
1000.0 |
|
| 11 (Tensile Strength (High)) |
1000.0 |
|
| 11 (Yield Stress ( High) - 6mm up to and including 12mm) |
1000.0 |
|
| 11 (Yield Stress( High) - Over 12mm up to and including 20mm) |
1000.0 |
|
| 11 (Yield Stress (High) - Over 20mm up to and including 40mm) |
1000.0 |
|
| 11 (Elongation (High tensile steel)) |
1000.0 |
|
| 12 (Bend Test) |
2000.0 |
|
| 8 (Dimension) |
500.0 |
|
| 9 (Diameter of Bar ( below 20mm )) |
500.0 |
|
| 7 (Visual Observation) |
1000.0 |
|
| 6 (Carbon) |
500.0 |
|
| 6 (Sulphur) |
500.0 |
|
| 6 (Phosphorus) |
500.0 |
|
|
| 3598 |
National Test House (NWR), Jaipur
| IS 4984 (1995) - high density polyethylene pipes for potable water supplies |
high density polyethylene pipes for potable water supplies |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 3599 |
National Test House (NWR), Jaipur
| IS 9845 (1998) - Determination of overall migration of constituents of plastics materials and articles intended to come in contact with foodstuffs - Method of analysis (Second Revision) |
Determination of overall migration of constituents of plastics materials and articles intended to come in contact with foodstuffs - Method of analysis (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 3600 |
National Test House (SR), Chennai
| IS 694 (2010) - Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1100 v (Fourth Revision) |
Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1100 v (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Acceptance Tests (Conductor resistance test,Test for thickness of insulation,Tensile strength and elongation at break of insulation,Insulation resistance test,High voltage test ,Flammability test ,Oxygen index test ,Test for temperature index , Test for halogen acid gas evaluation and Test for smoke density rating )) |
30000.0 |
|
| 5 (The insulation shall be of polyvinyl chloride compound of
a) Type A — Cables for fixed installation
b) Type C — Heat-resistant cables (HR)
c) Type D — Flexible cables and cords
The insulation shall be so applied that it fits closely on the conductor. It shall be possible to remove it without damage to the insulation itself, to the conductor) |
- |
|
| 6 (Filler: Material & Application
The fillers shall be composed of one of the following or of any combination of the following:
a) A compound based on unvulcanized rubber or plastics; or
b) Natural or synthetic textiles; or
c) Paper; or
d) PVC) |
- |
|
| 7 (Binder tape (Binder tape shall consist of plastic or proof textile material.)) |
- |
|
| 8 (Sheath: Material, Colour & application of sheath
The sheath shall be polyvinyl chloride compound of the type specified for each type of cable as given below:
a) Type ST1 — cables for fixed installations
b) Type ST2 — cables sheathed with 85°C HRPVC compound
c) Type ST3 — flexible cables) |
- |
|
| 9 (Ovality) |
- |
|
| 12 (Core identification) |
- |
|
| 13 (Cable code) |
- |
|
| 15 (Packing and Marking) |
- |
|
| Table 1. iii. a. 1 (Annealing test for copper (core 1)) |
500.0 |
|
| Table 1. iii. a. 2 (Tensile test for Aluminium(core 1)) |
500.0 |
|
| Table 1. iii. a. 3 (Wrapping test for Aluminium) |
500.0 |
|
| Table 1. iii. a. 4 (Conductor resistance test (core 1)) |
1500.0 |
|
| Table 1. iii. a. 5 (Persulphate test (for tinned copper conductor only)) |
1000.0 |
|
| Table 1. iii. b (Test for overall dimension and thickness of insulation/sheath) |
1000.0 |
|
| Table 1. iii. b(2) (Minimum thickness of insulation (Core 1)) |
500.0 |
|
| Table 1. iii. b(3) (Average thickness of sheath) |
- |
|
| Table 1. iii. b(4) (Minimum thickness of sheath) |
- |
|
| Table 1. iii. b(5) (Overall dimension) |
500.0 |
|
| Table 1. iii. c.1(1) (Tensile strength for insulation(Core 1)) |
1000.0 |
|
| Table 1. iii. c.1(2) (Percentage elongation for insulation (Core 1)) |
1000.0 |
|
| Table 1. iii. c.2 (Loss of mass test for insulation (Core 1)) |
500.0 |
|
| Table 1. iii. c.3(1) (Tensile strength test after ageing for insulation(Core 1)) |
500.0 |
|
| Table 1. iii. c.3(2) (Percentage elongation after ageing for insulation(Core 1)) |
500.0 |
|
| Table 1. iii. c.3(3) (Variation of tensile strength after ageing for insulation(Core 1)) |
- |
|
| Table 1. iii. c.3(4) (Variation in percentage elongation after ageing for insulation (Core 1)) |
- |
|
| Table 1. iii. c.4 (Shrinkage test for insulation(Core 1)) |
500.0 |
|
| Table 1. iii. c.5 (Heat shock test for insulation(Core 1)) |
250.0 |
|
| Table 1. iii. c.6 (Hot deformation test for insulation(Core 1)) |
250.0 |
|
| Table 1. iii. c.7 (Thermal stability test for insulation(Core 1)) |
500.0 |
|
| Table 1. iii. c.8 (Cold bend test for insulation(Core 1)) |
1000.0 |
|
| Table 1. iii. c.9 (Cold impact test for insulation(Core 1)) |
1000.0 |
|
| Table 1. iii. c.10(2) (Flammability test for insulation-Period of burning (Core 1)) |
750.0 |
|
| Table 1. iii. c.10(1) (Flammability test for insulation-Unaffected portion from the lower edge the top clamp(Core 1)) |
500.0 |
|
| Table 1. iii. c.11 (The Oxygen index for insulation(Core 1)) |
5000.0 |
|
| Table 1. iii. c.12 (Test temperature index for insulation(Core 1)) |
5000.0 |
|
| Table 1. iii. c.13 (Test for halogen acid gas evaluation for insulation (Core 1)) |
5000.0 |
|
| Table 1. iii. c.14 (Smoke density test for insulation (Core 1)) |
5000.0 |
|
| Table 1. iii. d.1(1) (Tensile strength for sheath) |
- |
|
| Table 1. iii. d.1(2) (Elongation test for sheath) |
- |
|
| Table 1. iii. d.2 (Loss of mass test for sheath) |
- |
|
| Table 1. iii. d.3(1) (Tensile strength after ageing for sheath) |
- |
|
| Table 1. iii. d.3(2) (Percentage Elongation after ageing for sheath) |
- |
|
| Table 1. iii. d.3(3) (Variation in tensile strength after ageing for sheath) |
- |
|
| Table 1. iii. d.3(4) (Variation in percentage elongation after ageing for sheath) |
- |
|
| Table 1. iii. d.4 (Shrinkage test for sheath) |
- |
|
| Table 1. iii. d.5 (Heat shock test for sheath) |
- |
|
| Table 1. iii. d.6 (Hot deformation test for sheath) |
- |
|
| Table 1. iii. d.7 (Thermal stability for sheath) |
- |
|
| Table 1. iii. d.8 (Oxygen index for sheath) |
5000.0 |
|
| Table 1. iii. d.9 (Test for temperature index for sheath) |
5000.0 |
|
| Table 1. iii. d.10 (Test for halogen acid gas evaluation for sheath) |
5000.0 |
|
| Table 1. iii. d.11 (Smoke density rating for sheath) |
5000.0 |
|
| Table 1. iii. d.12 (Cold bend test for sheath) |
- |
|
| Table 1. iii. d.13 (Cold impact test(for sheath)) |
- |
|
| Table 1. iii. e.1(1) (High voltage test (water immersion test)) |
3000.0 |
|
| Table 1. iii. e.1(2) (High voltage test DC (Core 1)) |
1000.0 |
|
| Table 1. iii. e.3 , ii.g (Insulation resistance test) |
2000.0 |
|
| Table 1. iii. e.3 , ii.g (Insulation resistance test) |
2000.0 |
|
| Table 1. iii. e.3 , ii.g (Insulation resistance test) |
2000.0 |
|
| Table 1. iii. e.3 , ii.g (Insulation resistance test) |
2000.0 |
|
| Table 1. iii. e.4 (High voltage test (Cl. 10.2)(at room temperature)) |
1500.0 |
|
| Table 1. iii. e.4(1) (Flammability Test on complete cable -Period of burning) |
500.0 |
|
| Table 1. iii. e.4(2) (Flammability test on complete cable-Unaffected portion) |
750.0 |
|
| Table 1. iii. e.5 (Additional Ageing Test (for Cables for Outdoor Use)) |
3000.0 |
|
| Table 1. iii. e.5(1) (High Voltage Test after additional ageing) |
- |
|
| Table 1. iii. e.5(2) (Cold bend or cold impact test after additional ageing) |
- |
|
| Table 1. iii. (Type tests) |
40000.0 |
|
| Table 1 (Test on two core cable/single core sheathed cable) |
2000.0 |
|
| Table 1 (Test on three core cable) |
4000.0 |
|
| Table 1 (Test on four core cable) |
6000.0 |
|
| Table 1 (Test on five core cable) |
8000.0 |
|
| Table 1 (Test on six core cable) |
10000.0 |
|
| table 1 (Test on seven core cable) |
12000.0 |
|
| Table 4 of IS 191 (Purity test (for Cu)) |
3500.0 |
|
|
