NTH - Management Information System

Search by Standard No.

Reset

3858 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

3541

National Test House (NR), Ghaziabad

IS 9537 : Part 2 (1981) - Specification for conduits for electrical installations: Part 2 rigid steel conduits

Specification for conduits for electrical installations: Part 2 rigid steel conduits

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.2 (Checking the Maximum outside diameter)	750.0
7.2 (Checking the Minimum outside diameter.)	750.0
7 (Outside Diameter)	500.0
7 (Wall thickness)	500.0
9.3 (Compression Test)	3000.0
13 (External Influence Test (With Seam on the Outside of the Bend))	1000.0
13 (External Influence Test (With Seam on the flank))	1000.0
9.2 (Bending Test (With Seam on the flank))	500.0
9.2 (Bending Test (With Seam on the Outside of flank))	500.0
0.1 (Mass of Zn Coating)	2000.0
0.2 (Free bore test)	1000.0
0.3 (Uniformity of Zn Coating)	1000.0
0.4 (Adhesion Test)	1000.0

3542

National Test House (NWR), Jaipur

IS 4454 : Part 1 (2001) - Steel wire for mechanical springs - Specification: Part 1 cold drawn unalloyed steel wire (Third Revision)

Steel wire for mechanical springs - Specification: Part 1 cold drawn unalloyed steel wire (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1, 7.1.1, 7.2, 7.2.1 (Carbon)	1000.0
7.1, 7.1.1, 7.2, 7.2.2 (Silicon)	2000.0
7.1, 7.1.1, 7.2, 7.2.3 (Manganese)	1000.0
7.1, 7.1.1, 7.2, 7.2.5 (Phosphorus)	1000.0
7.1, 7.1.1, 7.2, 7.2.4 (Sulphur)	1000.0
7.1, 7.1.1, 7.2, 7.2.6 (Copper)	1000.0
7.1, 7.1.1, 7.2, 7.2.10 (Nb+V+Ti)	3000.0
7.1, 7.1.1, 7.2, 7.2.12 (Cu+Ni+Cr)	3000.0
10.1 (Tensile Strength)	3000.0
9 (Dimensions)	1000.0
7.1, 7.2 (Chemical Composition (C, S, P, Si, Mn, Cu))	3000.0
10.1 (% Elongation)	2000.0
10 (Hardness Test)	2000.0

3543

National Test House (ER), Kolkata

RDSO C-9505 (Revised) (2001) - Schedule of Technical Requirements for Enhanced Capacity (Alloy Steel) Screw Couplings used on Railway Coaches

Schedule of Technical Requirements for Enhanced Capacity (Alloy Steel) Screw Couplings used on Railway Coaches

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.3.2 (Destruction Test)	7500.0
7.3.1 (Impact Test)	7500.0

3544

National Test House (NWR), Jaipur

IS 277 (2018) - Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

Galvanized steel strips and sheets (Plain And Corrugated) - Specification (Seventh Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.1 (Mass of Zn coating)	2000.0
8.1 (Uniformity of Zn coating)	1000.0
15 (Dimensions of Corrugated sheet)	1000.0
13 (Mass Test)	1000.0
8.1 (Erischen cupping test)	1000.0
8.1 (Percentage Elongation, %)	1000.0
8.1 (Yield Strength, MPa)	1000.0
8.1 (Tensile strength, MPa)	1000.0
0 (Thickness of Paint coating at side 1)	1000.0
0 (Thickness of Paint coating at side 2)	1000.0
5.1 (Carbon)	500.0
5.1 (Manganese)	500.0
5.1 (Sulphur)	500.0
5.1 (Phosphorus)	500.0
8.2 (Bend Test)	1000.0

3545

National Test House (NWR), Jaipur

IS 398 : Part 2 (1996) - Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10 (Construction (7/30/54 wire construction))	-
12 (Seal, Packing & Markings (7/30/54 wire construction))	-
13.9 (Surface condition test (30 or 54 wire construction))	1000.0
13.9 (d. c. Resistance test)	2000.0
13 (Mechanical parameters for 100 Sqmm)	14000.0
13.6 (Resistance of Aluminium wire (7 wire construction))	5000.0
13.4.1 (Ductility test-Torsion test on steel wires (7 Wire construction))	3500.0
13.7(1) (Galvanizing test-Mass of zinc coating(7wire construction))	2000.0
13.6 (Resistance Test as per Clause 13.6 (Table 1) in Ohms/km)	3000.0
13.11 (Stress-strain test for Complete conductor and Steel core (30 or 54 wire construction))	24000.0
13.7(2) (Galvanizing test-Uniformity of Zinc coating.)	1000.0
13 (Mechanical Tests up to 80 Sqmm)	10000.0
0 (ACSR Conductor Type Tests)	20000.0
0 (ACSR Conductor Acceptance Tests)	14000.0
0 (ACSR Conductor Acceptance & Type Tests)	34000.0
13.3(1) (Breaking load of individual steel wire (7 Wire construction))	3500.0

3546

National Test House (NWR), Jaipur

IS 280 (2006) - Mild steel wire for general engineering purposes (Fourth Revision)

Mild steel wire for general engineering purposes (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.2 (Wrapping Test)	1000.0
9.1 (Tensile Strength)	3000.0
9.3 (Bend Test)	1000.0
0 (Mass of Zinc Coating)	2000.0
0 (Uniformity of Coating)	1000.0
13 (Freedom From Defects)	1000.0
7.1 (Wire Diameter)	1000.0

3547

National Test House (ER), Kolkata

DGMS S&T/Tech.Cir.(Approval)No.2 dated Dhanbad 03.06.2010 (2010) - Standard Components and Properties of Rigid Steel Props, Chocks& Cogs to be used in Mines

Standard Components and Properties of Rigid Steel Props, Chocks& Cogs to be used in Mines

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.3 (Axial Load Test)	1000.0
3.4 (Eccentric Load Test)	1000.0
3.5 (Overload Test)	1000.0
4 (Welding and Weld Test)	11000.0
1 (UTS, Y.S., Elongation)	3000.0
5 (Other Properties and parameters)	12000.0
2 (Chemical Composition)	10000.0

3548

National Test House (SR), Chennai

IS 191 (2007) - Copper - Specification (Fourth Revision)

Copper - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (Zinc )	1000.0
7.1 (Tin )	1000.0
7.1 (Lead )	1000.0
7.1 (Bismuth)	1000.0
7.1 (Antimony)	1000.0
7.1 (Arsenic )	2000.0
7.1 (Nickel )	1000.0
7.1 (Sulphur)	1000.0
7.1 (Iron )	1000.0
7.1 (Phosphorus )	1000.0
7.1 (Silver )	1000.0
7.1 (Copper + Silver )	2000.0
7.1 (Selenium)	1000.0

3549

National Test House (NWR), Jaipur

IS 2062 (2011) - Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

Hot rolled medium and high tensile structural steel - Specification (Seventh Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.2 (Carbon)	500.0
8.2 (Manganese)	500.0
8.2 (Silicon)	500.0
8.2 (Phosphorus)	500.0
8.2 (Sulphur)	500.0
8 (Chemical Analysis with micro-alloys)	5000.0
15 (Dimensions)	1000.0
12 (Impact Test (For Specified Quality Grade))	5000.0
11 (Bend Test - IS 1599: 2019.)	1500.0
10 (% Elongation - IS 1608 (Part 1): 2022.)	1000.0
10 (Yield Stress - - IS 1608 (Part 1): 2022.)	1000.0
10 (Tensile Strength - IS 1608 (Part 1): 2022)	1000.0

3550

National Test House (WR), Mumbai

IS 3854 (1997) - Switches for domestic and similar purposes - Specification (Second Revision)

Switches for domestic and similar purposes - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
17 (Temperature Rise (For 6-10A))	1800.0
16.2 (Electric Strength)	-
16.1 (Insulation Resistance)	-
15.3 (Test for Resistance to Humidity)	500.0
26.1 (Type Test)	16000.0
6 (Rating)	50.0
7 (Classification)	50.0
20 (Mechanical Strength)	100.0
8 (Marking)	-
26.2 (Acceptance Test)	10000.0

3551

National Test House (SR), Chennai

IS 9537:Part 3 (1983) - Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating materials

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating materials

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Marking, manufacturer's name/trade mark, Visual verification (Naked Eye))	-
6.4 (Durability of Marking)	-
7 (Verification of dimensions with gauges of conduit pipe and Checking of dimensions of the socket end)	2000.0
7.4 (Uniformity of Wall Thickness)	-
8 (Construction)	-
9.2 (Bending Test at room temperature)	2000.0
9.2.1 (Bending test at low temperature)	2000.0
9.3 (Compression Test (Compression under load))	2000.0
9.3.1 (Compression test (Permanent set))	2000.0
9.4 metal (Impact Test)	3000.0
9.5 metal (Collapse Test)	2000.0
10 (Resistance to Heat)	2000.0
11 (Resistance to Burning)	2000.0
12.1 (12.1.1 of IS:9537-Part I Electrical Strength)	2000.0
12 (12.1.2 Of IS:9537-Part I Insulation Resistance)	2000.0

3552

National Test House (ER), Kolkata

IS 2266 (2019) - Steel Wire Ropes for General Engineering Purpose —Specification

Steel Wire Ropes for General Engineering Purpose —Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Minimum Breaking Force)	10000.0
4 (Size (Nominal diameter in mm))	500.0
5 (Minimum Breaking Force.)	8000.0

3553

National Test House (NER), Guwahati

IS 2386 : Part 3 (1963) - Methods of test for aggregates for concrete Part 3 Specific gravity, density, voids, absorption and bulking

Methods of test for aggregates for concrete Part 3 Specific gravity, density, voids, absorption and bulking

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Surface Moisture)	500.0
3 (Loose Bulk Density)	500.0
3 (Compacted Bulk Density)	500.0
2 (Water Absorption)	1000.0
2 (Speciﬁc Gravity)	500.0

3554

National Test House (NER), Guwahati

IS 516 : Part 4 (2018) - Hardened Concrete -Methods of Test -Part 4, Sampling, Preparing and Testing of Concrete Cores ( First Revision ) ( IS 516 :(Part 4):2018)

Hardened Concrete -Methods of Test -Part 4, Sampling, Preparing and Testing of Concrete Cores ( First Revision ) ( IS 516 :(Part 4):2018)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Equivalent Cube Strength of Concrete core 1 set IS 516 (Part 4):2018)	4000.0
8 (Equivalent Cube Strength of core samples with preparation, N/mm^2)	5000.0
ASTM (Cement - Aggregate content in Concrete core)	4000.0

3555

National Test House (NER), Guwahati

IS 516 : Part 1 : Sec 1 (2021) - Hardened concrete methods of test part 1 testing of strength of hardened concrete section 1 compressive,flexucal and split tensile strength (First Revision)

Hardened concrete methods of test part 1 testing of strength of hardened concrete section 1 compressive,flexucal and split tensile strength (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

3556

National Test House (ER), Kolkata

IS 3832 (2005) - Hand - Operated chain pulley block - Specification (Third Revision)

Hand - Operated chain pulley block - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A (Load Test of Chain Pulley as per Customer Request)	3000.0

3557

National Test House (SR), Chennai

IS 2547 : Part 1 (1976) - Specification for gypsum building plaster: Part 1 excluding premixed lightweight plasters

Specification for gypsum building plaster: Part 1 excluding premixed lightweight plasters

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Setting Time)	500.0
5.2 (Residue on sieving)	500.0
5.2 (Transverse Strength)	1000.0
5.2 (Soundness)	500.0
5.2 (Expansion on setting)	500.0
Table 1 Clause 4.1 (Loss of Ignition , percent by mass)	1000.0
Table 1 Clause 4.1 (Sodium Soluble Salts, expressed as percentage of Na2O)	1000.0
Table 1 Clause 4.1 (Soluble Magnesium salts, expressed as percentage of MgO)	1500.0
Table 1 Clause 4.1 (CaO, Percent by mass)	1500.0
Table 1 Clause 4.1 (SO3, Percent by mass)	1000.0
5.2 (Mechanical resistance of set neat plaster)	500.0

3558

National Test House (SR), Chennai

IS 14223 : Part 1 (1995) - Polished Building Stones: Part 1 Granite

Polished Building Stones: Part 1 Granite

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Hardness)	2000.0
5 (Porosity)	1000.0
5 (Water absorption)	1000.0
5 (Specific gravity)	1000.0
5 (Dry density )	1000.0
5 (Moisture content)	500.0
4 (Dimensions)	500.0
5 (Compressive strength)	2000.0
5 (Resistance to wear)	4000.0

3559

National Test House (ER), Kolkata

IS 7810 (1999) - Code of practice for radiographic examination of resistance spot welds on aluminium and its alloys (First Revision)

Code of practice for radiographic examination of resistance spot welds on aluminium and its alloys (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 7810 (Radiography)	500.0

3560

National Test House (ER), Kolkata

IS 7739 : Part 5 (1976) - Code of practice for preparation of metallographic specimens: Part 5 iron and steel and their examination

Code of practice for preparation of metallographic specimens: Part 5 iron and steel and their examination

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 7739 (Microstructure)	3000.0

3561

National Test House (ER), Kolkata

IS 6396:2023 (2023) - Steels - Determination of the Depth of Decarburization

Steels - Determination of the Depth of Decarburization

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Measuring decarburized depth of steel)	2000.0

3562

National Test House (ER), Kolkata

IS 7310 : Part 1 (1974) - Approval test for welders to approve welding procedures (plate & electrodes not supplied by NTH)

Approval test for welders to approve welding procedures (plate & electrodes not supplied by NTH)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.3.1 (Macro-examination Test)	1000.0
8.2.1a) (Penetrant Testing)	1000.0
8.3.1 (Fillet weld fracture test)	3000.0

3563

National Test House (ER), Kolkata

IS 4163 (2021) - Steel - Determination of content of nonmetallic inclusions - Micrographic method using standard diagrams

Steel - Determination of content of nonmetallic inclusions - Micrographic method using standard diagrams

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Inclusion rating)	4000.0

3564

National Test House (ER), Kolkata

IS 1599 (2023) - Metallic Materials - Bend Test

Metallic Materials - Bend Test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 1599 (Bend test)	1500.0

3565

National Test House (ER), Kolkata

IS 4748 (2021) - Steels - Micrographic determination of the apparent grain size (Third Revision)

Steels - Micrographic determination of the apparent grain size (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Grain Size measurement without heat treatment)	3000.0
7 (Grain Size measurement with heat treatment)	3500.0

3566

National Test House (ER), Kolkata

IS 4853 (1982) - Recommended practice for radiographic inspection of fusion welded butt joints in steel pipes (First Revision)

Recommended practice for radiographic inspection of fusion welded butt joints in steel pipes (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 4853 (Radiography)	2000.0

3567

National Test House (ER), Kolkata

IS 3099 : Part 1 AND 2 (1992) - Microscopes - Slips and slidesspecification: Part 1 microscope slips: Part 2 microscope slides (First Revision)

Microscopes - Slips and slidesspecification: Part 1 microscope slips: Part 2 microscope slides (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Marking)	200.0
7 (Packaging)	200.0
6 (sampling)	200.0
5.2 (Edge Quality)	200.0
5.1 (Surface Finish)	200.0
4 (Visible Seed)	500.0
3.1 (Thickness )	500.0
3 ( Width)	500.0
3 (Length)	500.0
2.1 (Refractive Index)	1000.0

3568

National Test House (ER), Kolkata

IS 7318 : Part 1 (1974) - Approval test for welders when welding procedure approval is not required: Part 1 fusion welding of steel

Approval test for welders when welding procedure approval is not required: Part 1 fusion welding of steel

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
NA (Radiography examination)	1000.0
5.1 (Visual examination)	1000.0
5.2.2 (Macro-examination)	1000.0
5.2.5 (Fillet Weld Fracture Test)	1000.0
5.2.3 (Root Bend Test)	1000.0
5.2.4 (Side Bend Test)	1000.0

3569

National Test House (ER), Kolkata

IS 7291 (1981) - Specification for high speed tool steels (First Revision)

Specification for high speed tool steels (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12.1 (Dimension)	500.0
11 (Grain Size)	3000.0
10 (Micro Structure)	3000.0
9 (De-Carburization)	2000.0
8 (Macro test)	1000.0
12.2.1 (Straightness)	500.0
7.1 (Hardness)	1000.0
5 (Vanadium)	500.0
5 (Cobalt)	500.0
5 (Molybdenum)	500.0
5 (Chromium)	500.0
5 (Tungsten)	500.0
5 (Phosphorus)	500.0
5 (Sulphur)	500.0
5 (Manganese)	500.0
5 (Silicon)	500.0
5 (Carbon)	500.0

3570

National Test House (ER), Kolkata

IS 7283 (1992) - Hot - Rolled bars for the production of bright bars and machined parts for engineering applications specification (First Revision)

Hot - Rolled bars for the production of bright bars and machined parts for engineering applications specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11 (Grain Size)	3000.0
9 (Inclusion rating)	4000.0
8 (De-Carburization)	2000.0
6.3 (Macro test)	1000.0
6.1.1 (MPI)	1000.0
10 (Hardenability)	8000.0