NTH - Management Information System

Search by Standard No.

Reset

4236 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

3481

National Test House (ER), Kolkata

IS 8504 : Part 4 (2013) - Electrical insulating materials - Thermal endurance properties: Part 4 instructions for calculating thermal endurance characteristics (First Revision)

Electrical insulating materials - Thermal endurance properties: Part 4 instructions for calculating thermal endurance characteristics (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

3482

National Test House (ER), Kolkata

Dynamometer (2000kg) - Calibration of Dynamometer (2000kg)

Calibration of Dynamometer (2000kg)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Force)	12000.0

3483

National Test House (NR), Ghaziabad

IS 8978 (1992) - Specification for electric instantaneous water heaters (Second Revision)

Specification for electric instantaneous water heaters (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Capacity)	100.0
2 (Reference)	100.0
3 (Terminology)	100.0
4 (General Requirements)	100.0
5 (General Note on Test)	100.0
6 (Rating)	100.0
7 (Classification)	100.0
8 (Marking )	100.0
13 (Tests-Acceptance and Type tests)	-
10 (Finish)	200.0
9 (Radiation,toxicity and similar hazards)	-
9 (Safety Requirements)	100.0
9 (Void)	-
9 (Power input and current)	1000.0
9 (Temperature rise)	1000.0
9 (Leakage current and electric ctrength)	1000.0
9 (Transient over voltages)	-
9 (Overload protection of transformers and associated circuits)	-
9 (Electric Strength)	500.0
9 (Leakage current and electric ctrength)	1000.0
9 (Endurance)	-
9 (Temperature rise)	500.0
9 (Temperature of winding insulation)	500.0
9 (Mechanical strength)	500.0
9 (Construction and pressure test)	500.0
9 (Internal wiring)	400.0
9 (Components)	500.0
9 (Dimensions and cross sectional area of cables and conductors)	500.0
9 (Cross -sectional area for conductors)	500.0
9 (Provision for earthing)	500.0
9 (Screws and connections)	300.0
9 (Clearance, Creepage)	500.0
9 (Resistance to heat and fire)	500.0
9 (Resistance to rusting)	500.0
11 (No of operations)	200.0

3484

National Test House (NR), Ghaziabad

IS 374 (2019) - Specification for electric ceiling type fans and regulators (Third Revision)

Specification for electric ceiling type fans and regulators (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
17 (Total harmonic distortion shall be less than 20 percent (This test is applicable for brushless dc motor fans))	-
11.2 (For BLDC type fan should start its rotation in its normal direction of rotation, as specified by the manufacturer. During ‘start' it should not move in the reverse direction before resuming its normal direction of rotation)	100.0
10.8 (The voltage drop across the electronic type regulator at the maximum speed position shall not exceed 2 percent of the rated voltage of the fan.)	200.0
10.5 (The mechanism of regulator shall be so designed as to ensure positive contact at each running position. In the case of inductance type regulator, it is essential that no portion of the inductive winding should remain permanently short-circuited in any of the running positions.)	200.0
10.4 (The regulator handle or knob shall either be of insulating material or, if of metal, shall be adequately insulated electrically and thermally so that its temperature-rise above ambient is limited to 20⁰C)	200.0
10.3 (If regulators have a capacitor it shall have provision of discharging in the ‘OFF' position.)	500.0
10.2 (The speed difference at any running position shall not deviate by more than ±50% (for induction motor) from the ideal speed difference. (in rpm) and ±20% (for BLDC motor) from the ideal speed difference. (in rpm).)	-
10.1 (Speed regulators shall be capable of reducing the speed of fan at least 50% of the full speed at test voltage)	100.0
9 (Wireways shall be smooth and free from sharp edges)	100.0
9 (Appliances having provision for attaching a luminaire shall incorporate appropriate terminals and internal wiring)	-
9 (Metal parts used in suspension system shall have a minimum wall thickness of 1.5 mm)	100.0
16 (After the test the regulator shall continue to function satisfactorily)	200.0
16 (Protection against electric access to live parts)	-
16 (For Regulator: The regulator switch is subjected to 2500 operations)	100.0
16 (After the test the fan shall continue to function satisfactorily)	200.0
16 (Protection against electric access to live parts)	200.0
16 (For Regulator: The regulator switch is subjected to 2500 operations)	100.0
16 (After the test the fan shall continue to function satisfactorily)	200.0
16 (Protection against electric access to live parts)	200.0
16 (For Regulator: The regulator switch is subjected to 2500 operations)	100.0
16 (After the test the fan shall continue to function satisfactorily)	200.0
16 (Protection against electric access to live parts)	200.0
16 (For Fan: Fans are subjected to 1000 cycle of operation.)	200.0
14.5 (Power factor)	500.0
14.4 (Peripheral Speed)	-
14.4 (Fan speed (RPM), %)	100.0
14.3 & Table 1 (Service value)	200.0
14.3 & Table 1 (Air delivery)	10000.0
12 (The motor of the fan of a particular size and model and its associated regulator and set of blades shall be Interchangeable such that the performance of the fan keeps within limits specified in this standard.)	-
13 (The criterion of noise level may be subject to an agreement between the manufacture and the purchaser.)	5000.0
11.1 (The fan shall be capable of starting up from rest with the regulator or remote, if any, at the lowest speed step when 85 % declared voltage in the voltage range is applied.)	100.0
10.6 (Adequate precautions shall be taken to prevent accidental contact of moving current carrying parts with the metallic body of the regulator.)	50.0
9 (Resistance to rusting)	100.0
9 (Glow wire Test)	200.0
9 (Clearance)	100.0
9 (Creepage distance)	100.0
9 (Shall withstand the mechanical stress and no damage impairing the further use of the fixings or connections shall occur after the test.)	100.0
9 (Earthing resistance , Ω)	100.0
9 (Class-II and Class-III appliances shall have no provision for earthing)	100.0
9 (Earthing terminal and earthing contacts shall not be connected to the neutral terminal.)	100.0
9 (Accessible metal parts of Class I appliances shall be permanently and reliably connected to an earthing terminal within the appliance or the earthing contact of the appliance inlet.)	100.0
9 (As in 9)	100.0
9 (Electric strength Shall withstand 1250 volts for one minute.)	-
9 (The appliance shall be provided with a set of terminals allowing the connection of cables / flexible cord)	100.0
9 (Capacitors : Shall be easily replaceable and clearly marked with maximum safe working temperature and the corresponding voltage and Capacitance . Capacitor shall comply with IS 1709)	100.0
9 (Blades : Two or more, well balanced blades made from metal or other suitable material and securely fixed so that they do not loose in operation.)	100.0
9 (Aluminium wire shall not be used for internal wiring)	100.0
9 (Internal wiring and electrical connections between different parts of the appliance shall be adequately protected or enclosed.)	100.0
9 (Then a torque of 50 Nm is applied to the fixed body of the fan for 1 min. The test is repeated with the torque applied in the reverse direction.)	100.0
9 (A load of 10000 N is suspended from the body of the fan for 1 min.)	200.0
9 (Impact Test: The appliance is rigidly supported and three blows having impact energy of 0.5 J are applied to every point of the enclosure that is likely to be weak.)	200.0
9 (Static Load Test for Ceiling Suspended Fan Blade Brackets)	200.0
9 (Temperature rise of winding shall not exceed : (°C))	-
9 (During the test, the appliance shall not emit flames, molten metal, poisonous or ignitable gas in hazardous amount.)	300.0
9 (Electric strength Shall withstand 1250 volts for one minute.)	-
9 (Leakage current (mA))	500.0
9 (As in 9)	500.0
9 (Electric strength Shall withstand 1000 volts for one minute.)	-
9 (Leakage current (mA))	500.0
9 (Temperature rise of outer surface of capacitor(°C))	500.0
9 (The temperature rise of Winding (°C))	150.0
9 (Rated Input (W) + 20%)	150.0
6.2 (The sizes of ceiling fans shall be 900,1050,1200,1400 & 1500 mm)	100.0
8 (Model or Type Reference of a luminaire that may be installed in a fan constructed for this purpose)	200.0
8 (IP number according to degree of protection against ingress of water, other than IPXO)	10.0
8 (Symbol for Class II appliances only)	10.0
8 (Fans for tropical climate shall be marked with letter 'T')	10.0
8.4 (BIS Certification marking)	10.0
8.3,e (Service value)	10.0
8.3,d (Type of bearings)	10.0
8.3,c (Type of regulator and number of running positions)	10.0
8.3,b (Number of blades)	10.0
8.3,a (Power factor)	10.0
8.2 (Earth terminal or contact shall be indelibly marked with the symbol '╧')	10.0
8.1,g (Country of manufacture)	10.0
8.1,f (Size of fan)	10.0
8.1,e (Input in watts)	10.0
8.1,d (Frequency or frequency range of power supply, if of ac;)	10.0
8.1,c (Type of fan , ac or dc)	10.0
8.1,b (Rated voltage(s) or voltage range;)	10.0
8.1,a (Manufacturer's name, trade-name of fan (if any) and number;)	10.0
7 (Fans for tropical climates)	-
7 (Fans for temperate climates)	40.0
7 (Protection against electric shock Class I/ Class II/ Class III)	40.0
8 (IP number according to degree of protection against ingress of water, other than IPXO)	10.0
8 (Symbol for Class II appliances only)	10.0
8.3,b (Number of blades)	10.0
Tests (Temperature Rise Test,Leakage Current Test,High Voltage Test and Fan Speed & Input.)	5000.0

3485

National Test House (ER), Kolkata

IS 1828: Part 1 (2022) - METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCE-MEASURING SYSTEM

METALLIC MATERIALS - CALIBRATION AND VERIFICATION OF STATIC UNIAXIAL TESTING MACHINES - PART 1: TENSION/COMPRESSION TESTING MACHINES - CALIBRATION AND VERIFICATION OF THE FORCE-MEASURING SYSTEM

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Force)	10000.0
6 (Force)	13000.0
6 (Force)	20000.0
6 (Force)	6000.0
6 (Force)	7000.0
6 (Force)	8000.0
6 (Force)	9000.0
6 (Force)	7000.0
6 (Force)	13000.0
6 (Force)	7000.0
6 (Force)	2000.0
6 (Force)	2000.0
0 (Rate of separation of the jaws, mm/minute)	2000.0

3486

National Test House (ER), Kolkata

IS 3624 (1987) - Specification for pressure and vacuum gauges (Second Revision)

Specification for pressure and vacuum gauges (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
14 (Pressure)	3000.0
14 (Pressure)	1200.0
14 (Pressure)	3000.0

3487

National Test House (ER), Kolkata

MORTH 803 Thermoplastic Road Marking Material MORTH-5th Revision 2013 (2013) - Ministry of Road Transport and Highways - Specifications form Road And Bridge Works 803.4.2

Ministry of Road Transport and Highways - Specifications form Road And Bridge Works 803.4.2

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
803.4.1.2 (Colour)	1200.0
803.4.1.2 (Drying Time)	1200.0
803.4.1.2 (Cracking Resistance (BS 3262 (Part 1)))	1200.0
803.4.1.2 (Binder Content % by mass (BS 3262 (Part 1)))	1200.0
803.4.1.2 (Flow resistance (BS 3262 (Part 1)))	1200.0
803.4.1.2 (Softening point (BS 3262 (Part 1)) ASTM D 36)	1200.0
803.4.1.2 (Titanium Dioxide, as TiO2 % by mass (BS 3262 (Part 1)))	1200.0
803.4.1.2 (Luminance (White) (Daylight luminance at 45 degrees))	1200.0
803.4.1.2 (Calcium carbonate and Inert fillers (BS 3262 (Part 1)))	1200.0
803.4.1.2 (Glass Bead content % (BS 3262 (Part 1)))	1200.0
803.4.2.3 (Free flowing properties)	500.0
803.4.2.3 (Roundness)	1000.0
803.4.2.3 (Appearance)	500.0
803.4.2.3 (Gradation (Type 2) - 850 micron (BS 6088))	600.0
803.4.2.3 (Gradation (Type 2) - 600 micron (BS 6088))	600.0
803.4.2.3 (Gradation (Type 2) - 300 micron (BS 6088))	600.0
803.4.2.3 (Gradation (Type 2) - 180 micron (BS 6088))	500.0
803.4.2.3 (Gradation (Type 2) - below 180 micron(BS 6088))	700.0
803.4.2.3 (Gradation (Type 1) - 180 micron (BS 6088))	750.0
803.4.2.3 (Gradation (Type 1) - 425 micron (BS 6088))	750.0
803.4.2.3 (Gradation (Type 1) - 850 micron (BS 6088))	750.0
803.4.2.3 (Gradation (Type 1) 1.18mm (BS 6088))	750.0

3488

National Test House (ER), Kolkata

BS 3262(Part -1)1989 (1989) - Hot Applied Thermoplastic Road Marking Material

Hot Applied Thermoplastic Road Marking Material

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Hot Applied Thermoplastic road Marking Material (Colour)	1000.0
Hot Applied Thermoplastic road Marking Material (Cracking resistance at low temperature on application to concrete Block)	1200.0
Hot Applied Thermoplastic road Marking Material (Drying time)	1000.0
Hot Applied Thermoplastic road Marking Material (Softening point)	1200.0
Hot Applied Thermoplastic road Marking Material (Flow Resistance)	1200.0
Hot Applied Thermoplastic road Marking Material (Solid Glass Bead content % by mass of total mixture)	1700.0
Hot Applied Thermoplastic road Marking Material (Luminance)	1500.0
Hot Applied Thermoplastic road Marking Material (Pigment as Titanium Dioxide (TiO2) % by mass of total mixture)	2000.0
Hot Applied Thermoplastic road Marking Material (Aggergate together with pigment ,Extender and solid Glass beads % by mass of total mixture)	2200.0
Hot Applied Thermoplastic Road Marking Material (Binder Content (Resin and Oil), % by mass of total mixture)	2000.0

3489

National Test House (ER), Kolkata

IS 1785 : Part 1 (1983) - Specification for plain hard - Drawn steel wire for prestressed concrete: Part 1 cold drawn stress - Relieved wire (Second Revision)

Specification for plain hard - Drawn steel wire for prestressed concrete: Part 1 cold drawn stress - Relieved wire (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Dimension)	1000.0
6.1 (Tensile Strength)	1000.0
6.2 (Proof Stress)	1000.0
6.4 (% Elongation)	1000.0
7.5 (Reverse Bend test)	1000.0
3 (Chemical Analysis)	2500.0

3490

National Test House (ER), Kolkata

IS 1161 (2014) - Steel Tube for Structural Purposes

Steel Tube for Structural Purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Outside Diameter)	500.0
6.1 (Thickness)	500.0
6.1 (Weight)	1000.0
7 (Workmanship)	1000.0
9 (Straightness)	1000.0
11.2 (Tensile Strength, MPa)	1000.0
11.2 (Yield strength, MPa)	1000.0
11.2 (Percent Elongation, %)	1000.0
11.3 (Bend Test / Flattening test)	1000.0
5 (Carbon)	500.0
5 (Sulphur)	500.0
5 (Phosphorus)	500.0
5 (Manganese)	500.0

3491

National Test House (ER), Kolkata

Custom - Berger QUV test - QUV test of Paint and Coating

QUV test of Paint and Coating

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A-1 (UV exposure for 500 hrs)	25000.0
A-2 (Salt spry for 96 hrs)	5000.0

3492

National Test House (WR), Mumbai

IS 101 part 6 sec 1 (1988) - "METHODS OF SAMPLING AND TEST FOR PAINTS, VARNISHES AND RELATED PRODUCTS" SALT SPRAY FOR 96 HRS.

"METHODS OF SAMPLING AND TEST FOR PAINTS, VARNISHES AND RELATED PRODUCTS" SALT SPRAY FOR 96 HRS.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 ()	-

3493

National Test House (WR), Mumbai

ASTM B117 - Salt spray for 3000 hrs ASTM B117

Salt spray for 3000 hrs ASTM B117

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ASTM B 117 (Salt Fog Test 5% Nacl solution(for 96 hrs) ASTM 117B/IEC 60512-11-6 AS PER CLAUSE NO. 7.4.9 FOR INTER VEHICULAR COUPLER UNIT 500AMP AS PER RDSO SPEC. NO. RDSO/PE/SPEC/AC/0177-(REV-01)-2013)	5000.0
1 ()	-

3494

National Test House (WR), Mumbai

BS 3262(Part -1)1989 (1989) - Hot Applied Thermoplastic Road Marking Material

Hot Applied Thermoplastic Road Marking Material

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Hot Applied Thermoplastic road Marking Material (Aggergate together with pigment ,Extender and solid Glass beads % by mass of total mixture)	2200.0
Hot Applied Thermoplastic road Marking Material (Colour)	1000.0
Hot Applied Thermoplastic road Marking Material (Drying time)	1000.0
Hot Applied Thermoplastic road Marking Material (Cracking resistance at low temperature on application to concrete Block)	1200.0
Hot Applied Thermoplastic road Marking Material (Softening point)	1200.0
Hot Applied Thermoplastic road Marking Material (Flow Resistance)	1200.0
Hot Applied Thermoplastic road Marking Material (Solid Glass Bead content % by mass of total mixture)	1700.0
Hot Applied Thermoplastic road Marking Material (Luminance)	1500.0
Hot Applied Thermoplastic road Marking Material (Pigment as Titanium Dioxide (TiO2) % by mass of total mixture)	2000.0
Hot Applied Thermoplastic Road Marking Material (Binder Content (Resin and Oil), % by mass of total mixture)	2000.0

3495

National Test House (SR), Chennai

IS 878 (2008) - Laboratory glassware - Graduated measuring cylinders (Second Revision)

Laboratory glassware - Graduated measuring cylinders (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Volume)	3000.0

3496

National Test House (SR), Chennai

IS 3624 (1987) - Specification for pressure and vacuum gauges (Second Revision)

Specification for pressure and vacuum gauges (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
14 (Pressure (up to 700 bar) (Industrial Gauges))	1200.0
14 (Pressure)	3000.0
14 (pressure gauge (Test gauge/Master gauge) Accuracy:0.25%)	4000.0

3497

National Test House (SR), Chennai

IS 1500 : Part 1 (2019) - Metallic materials - Brinell hardness test: Part 1 test method (Fifth Revision)

Metallic materials - Brinell hardness test: Part 1 test method (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Hardness)	2000.0

3498

National Test House (SR), Chennai

IS 460 : Part 2 (2020) - Test Sieves — Specification Part 2 Perforated Plate Test Sieves ( Fourth Revision )

Test Sieves — Specification Part 2 Perforated Plate Test Sieves ( Fourth Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Aperture Size)	2000.0

3499

National Test House (SR), Chennai

IS 460 : Part 1 (2020) - Test Sieves — Specification Part 1 Wire Cloth Test Sieves ( Fourth Revision )

Test Sieves — Specification Part 1 Wire Cloth Test Sieves ( Fourth Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Aperture size)	2000.0

3500

National Test House (NR), Ghaziabad

IS 2993 (1998) - A.C. motor capacitors (Second Revision)

A.C. motor capacitors (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2.9 (Capacitance measurement)	40.0
2.5 (Measuring frequency)	2500.0
2.5 (Tangent of loss angle)	-
2.16.4 (Evaluation of the failure)	1500.0
2.16 (Destruction test)	-
2.15 (RC value)	2000.0
2.15 (Change of capacitance)	-
2.15 (Voltage test between terminals)	-
2.15 (Self-healing test)	-
2.8 (a.c. voltage test)	2000.0
2.7 (a.c. voltage test)	2000.0
2.14 (Change in Capacitance)	2000.0
2.13.3 (Change in Capacitance measurement)	2000.0
2.13.3 (Conditions of compliance)	-
2.13.1 (Testing in air with forced circulation)	-
2.13 (Endurance test)	-
2.12 (Sealing test)	4000.0
2.11.4 (fixing bolt or stud (if fitted))	1500.0
2.11.3 (Vibration (sinusoidal) : Test Fc, IEC 68-2-6.)	-
2.11.2 (Soldering : Test T, IEC 68-2-20;)	-
2.11.1.5 (Visual examination)	-
2.11.1.4 (Test Ud - Torque (screw terminals))	200.0
2.11.1.3 (Test UC - Torsion (other half of the terminations))	200.0
2.11.1.2 (Test Ub - Bending (half cf the terminations))	200.0
2.11.1.1 (Test Ua - Tensile)	200.0
2.1 (Dimensions of the case)	200.0
2.1 (clearances)	150.0
2.1 (minimum creepage distances)	150.0
2.1 (fixing arrangements)	150.0
2.1 (terminals)	150.0
5.1 (Marking)	150.0
2.6 (Condition, Workmanship, Marking, Finish)	400.0
5.1 (Marking)	400.0

3501

National Test House (NWR), Jaipur

IS 3618 (1966) - "PHOSPHATE TREATMENT OF IRON AND STEEL FOR PROTECTION AGAINST CORROSION "

"PHOSPHATE TREATMENT OF IRON AND STEEL FOR PROTECTION AGAINST CORROSION "

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.3.1 (Weight of Phosphate Coating gm/m2)	2000.0

3502

National Test House (SR), Chennai

IS 101 : Part 8 : Sec 5 2022 (2022) - Methods of sampling and test for paints, varnishes and related products: Part 8 tests on liquid paints (General And Physical): Sec 5 Lead Restriction Test

Methods of sampling and test for paints, varnishes and related products: Part 8 tests on liquid paints (General And Physical): Sec 5 Lead Restriction Test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
101 part 8 sec 5 (Lead Restriction Test)	2500.0

3503

National Test House (SR), Chennai

IS 3179 (1990) - Engineering metrology - Feeler gauges (second revision)

Engineering metrology - Feeler gauges (second revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.4 (Dimension calibration (thickness))	3000.0

3504

National Test House (SR), Chennai

IS 2092 (2025) - Geometrical Product Specifications (GPS) - Dimensional Measuring Equipment - Design and Metrological Characteristics of Mechanical Dial Gauges

Geometrical Product Specifications (GPS) - Dimensional Measuring Equipment - Design and Metrological Characteristics of Mechanical Dial Gauges

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.4 (Accuracy)	1200.0
5.4 (Accuracy (0 to 10mm))	2000.0
5.4 (Accuracy (0 to 25mm))	2500.0
5.4 (Accuracy (0 to 50mm))	3000.0

3505

National Test House (SR), Chennai

IS 2967 (1983 RA 2019) - Specification for external micrometer (First Revision)

Specification for external micrometer (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Error of Measurement)	1200.0
4 (Error of Measurement (For 0-100mm))	1200.0

3506

National Test House (SR), Chennai

IS 16491 : Part 1 (2024) - Geometrical product specifications (GPS) - Dimensional measuring equipment: Part 1 calipers; design and metrological characteristics

Geometrical product specifications (GPS) - Dimensional measuring equipment: Part 1 calipers; design and metrological characteristics

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Length)	1200.0
5 (Length)	2000.0
5 (Length)	2000.0

3507

National Test House (SR), Chennai

IS 2984 (2003) - Slip gauges - Specification [ISO title : geometrical product specifications (GPS) - length standards : gauge blocks] (Second Revision)

Slip gauges - Specification [ISO title : geometrical product specifications (GPS) - length standards : gauge blocks] (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (deviation of length at any point from nominal Iength (M87 Set))	9500.0
7 (deviation of length at any point from nominal Iength (M46 Set))	6000.0
7 (deviation of length at any point from nominal Iength (M112 Set))	12000.0

3508

National Test House (NWR), Jaipur

101 part 5 sec 2 (1988) - "METHODS OF SAMPLING AND TEST FOR PAINTS, VARNISHES AND RELATED PRODUCTS" SCRATCH HARDNESS TEST UPTO 1000 GM

"METHODS OF SAMPLING AND TEST FOR PAINTS, VARNISHES AND RELATED PRODUCTS" SCRATCH HARDNESS TEST UPTO 1000 GM

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3 (Scratch Hardness Test up to 1000 g)	2000.0

3509

National Test House (NWR), Jaipur

IS 101 part 6 sec 1 (1988) - "METHODS OF SAMPLING AND TEST FOR PAINTS, VARNISHES AND RELATED PRODUCTS" SALT SPRAY FOR 96 HRS.

"METHODS OF SAMPLING AND TEST FOR PAINTS, VARNISHES AND RELATED PRODUCTS" SALT SPRAY FOR 96 HRS.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3 (Neutral Salt Spray (96 hrs.))	8000.0

3510

National Test House (NWR), Jaipur

ASTM E1999 (1998) - Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry

Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Carbon ( C ))	1000.0
- (Chromium ( Cr ))	1000.0
- (Silicon (Si))	1000.0
- (Manganese (Mn))	1000.0
- (Phosphorous (P))	1000.0
- (Sulphur (S))	1000.0