| 3331 |
National Test House (NR), Ghaziabad
| IS 2026 : Part 1 (2011) - Power Transformers: Part 1 General (Second Revision) |
Power Transformers: Part 1 General (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 10.1.2(a) (Temperatur Rise) |
20000.0 |
|
| 10.1.1(a) (Measurement of windlng Resistance) |
1600.0 |
|
| 10.1.1(b) (Voltage ratio & Phase Displacement) |
3200.0 |
|
| 10.1.1 (C) (% impedance and load loss) |
12800.0 |
|
| 10.1.1(d) (No Load loss and current) |
9600.0 |
|
| 10.1.1(e) (Separate source AC voltage withstand test) |
4000.0 |
|
| 10.1.1(e) (Induced Overvoltage) |
6400.0 |
|
| 10.1.2(b) (Lightning lmpulse Voltage test, Chopped
impulse voltage test, Multi chopped irnpulse voltage test) |
500000.0 |
|
| 10.1.3(d) (Measurement of Zero phase sequence impedance for 3
Phase transformer) |
3000.0 |
|
| 10.1.3(g) (% Harmonics) |
10000.0 |
|
| 10.1.3(j) (Measurement of Insulation Resistance) |
2400.0 |
|
| 10.1.3 (f) (Noise Level) |
10000.0 |
|
| 7 (Rating Plate Details) |
- |
|
| 17.3.1 (a) of CBIP Pub. No. 317 (Pressure Test Routine (Deflection)) |
8000.0 |
|
| 17.3.2 (a) of CBIP Pub. No. 317 (Vacuum Test - Type (Deflection)) |
10000.0 |
|
| 17.3.2 (b) of CBIP Pub. No. 317 (Oil Leakage Test (Pressure Test - Type)) |
10000.0 |
|
| As per CBIP No. 317 Cl. 3.10 (Magnetic Balance Test) |
3000.0 |
|
| As per IS : 335 (Breakdown Voltage Test) |
10000.0 |
|
| CBIP Publication no. 317 (Measurement of Unbalance Current) |
5000.0 |
|
| 10.1.2 (b) (Lightning Impulse Voltage Withstand Test upto 11 KV & 500 KVA Rating) |
40000.0 |
|
| 10.1.2 (b) (Lightning Impulse Voltage Withstand Test upto 11 KV & 1000 KVA Rating) |
50000.0 |
|
| 10.1.2 (b) (Lightning Impulse Voltage Withstand Test upto 11 KV & 2500 KVA Rating) |
65000.0 |
|
|
| 3332 |
National Test House (ER), Kolkata
| IS 1622 (1981) - Methods of sampling and microbiological examination or water (First Revision) |
Methods of sampling and microbiological examination or water (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.3 (Coliform) |
1000.0 |
|
|
| 3333 |
National Test House (ER), Kolkata
| IS 1835 (1976) - Round Steel Wire for Ropes |
Round Steel Wire for Ropes |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Chemical Analysis) |
4000.0 |
|
| 7 (Freedom from Defects) |
1000.0 |
|
| 10 (Diameter) |
1000.0 |
|
| 11.2 (Uniformity of Zinc Coating) |
2000.0 |
|
| 11.3 (Mass of Zinc Coating) |
2000.0 |
|
| 12.2 (Tensile Strength) |
3000.0 |
|
| 12.3 (Torsion Test) |
2000.0 |
|
| 12.5 (Wrapping Test) |
2000.0 |
|
|
| 3334 |
National Test House (SR), Chennai
| IS 10500 (2012) - Drinking Water - Specification (Second Revision) |
Drinking Water - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Colour - IS 3025 (Part 4): 2021, Clause 4) |
200.0 |
|
| 4 (Total alkalinity as Calcium carbonate - IS 3025 (Part 23): 2023) |
400.0 |
|
| 4 (Total Hardness (as CaCO3) - IS 3025 (Part 21) : 2009) |
500.0 |
|
| 4 (Free residual chlorine - IS 3025( Part 26) : 2021, Clause 7) |
400.0 |
|
| 4 (Calcium (as Ca) - IS 3025 (Part 40) : 1991, Clause 5) |
500.0 |
|
| 4 (Sulphate (as SO4) - IS 3025 (Part 75) : 2022) |
500.0 |
|
| 4 (Chloride (as Cl) - IS 3025 (Part 32): 1988, Clause 2/IS 3025 (Part 75) : 2022) |
500.0 |
|
| 4 (Total Dissolved Solids - IS 3025 (Part 16) : 2023) |
500.0 |
|
| 4 (pH value- IS 3025 (Part 11) : 2022) |
300.0 |
|
| 4 (Magnesium (as Mg) - IS 3025 (Part 46): 1994) |
500.0 |
|
| 4 (Turbidity - IS 3025 (Part 10) : 2023) |
200.0 |
|
| 4 (Iron (as Fe) - IS 3025 (Part 53) :2003, Clause 7) |
500.0 |
|
| 4 (Odour - IS 3025 (Part 5) : 2018) |
300.0 |
|
| 4 (Nitrate (as NO3) - IS 3025 (Part 75): 2022) |
500.0 |
|
| 4 (Fluoride (as F) - IS 3025 (Part 75) : 2022) |
500.0 |
|
| 4 (Total Arsenic (as As) - IS 3025 (Part 37): 2022) |
500.0 |
|
| 4 (Cadmium (as Cd) - IS 3025 (Part 41) : 2022) |
500.0 |
|
| 4 (Copper (as Cu) - IS 3025 (Part 42): 1992) |
500.0 |
|
| 4 (Lead (as Pb) - IS 3025 (Part 47) : 1994) |
500.0 |
|
| 4 (Zinc (as Zn) - IS 3025 (Part 49): 1994) |
500.0 |
|
| 4.1 (Escherichia coli per 100 ml, Method: IS 15185:2016) |
1750.0 |
|
| 4.1 (Total Coliform Bacteria per 100 ml, Method: IS 15185:2016) |
1750.0 |
|
| 4 (Chemical parameters as per Annexure A) |
7500.0 |
|
|
| 3335 |
National Test House (ER), Kolkata
| OPTICAL FIBER CABLE - OPTICAL FIBER CABLE |
OPTICAL FIBER CABLE |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.1(i) (Transmission of Light Test of Fiber Cable) |
1000.0 |
|
| 4.1(h) (Overall Diameter of Jacket) |
500.0 |
|
| 4.1(g) (Colour of Jacket) |
500.0 |
|
| 4.1(f) (Any other Detail of fiber cable) |
500.0 |
|
| 4.1(e) (Mylar Fiber and Colour) |
500.0 |
|
| 4.1(d) (Colour of Sheath) |
500.0 |
|
| 4.1(c) (Individual Sheathed of Fiber Cable) |
8000.0 |
|
| 4.1(b) (Presence of Sheath/Covering in addition to coat on Fiber) |
500.0 |
|
| 4.1(a) (Nos of Fibers) |
1000.0 |
|
| 4 (Construction of Optical Fiber Cable) |
500.0 |
|
| 3 (Marking on Optical Fiber Cable) |
500.0 |
|
| 2 (Description of Optical Fiber Cable) |
500.0 |
|
| 1 (Marking) |
500.0 |
|
|
| 3336 |
National Test House (NWR), Jaipur
| IS 12786 (1989) - Irrigation Equipment - Polyethylene Pipes for Irrigation Laterals - Specification |
Irrigation Equipment - Polyethylene Pipes for Irrigation Laterals - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.4 (Susceptibility to Environmental Stress Cracking) |
2000.0 |
|
| 7.3 (Elongation at break) |
2000.0 |
|
| 7.3 (Tensile Strength at break) |
2000.0 |
|
| 7.2 (Reversion test) |
2000.0 |
|
| 7.1 (Quality test (2.5 Mpa induced stress for 100 hrs at 70°C)) |
5000.0 |
|
| 7.1 (Acceptance test (6.9 Mpa induced stress for 01hrs at 20°C)) |
5000.0 |
|
| 6 (Visual Appearance ) |
1000.0 |
|
| 4.2 (Carbon black Dispersion) |
1000.0 |
|
| 4.2 (Carbon black Content) |
1500.0 |
|
| 5.1 (Average Wall Thickness) |
1000.0 |
|
| 5.1 (Outside Diameter) |
1000.0 |
|
|
| 3337 |
National Test House (NWR), Jaipur
| IS 456-II (2000) - Plain and Reinforced Concrete - CONCRETE CHEMICAL [Custom] |
Plain and Reinforced Concrete - CONCRETE CHEMICAL |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.4.1.2 (Compressive strength of water sample) |
4000.0 |
|
| 5.4.1.3 (Setting time of water sample) |
2000.0 |
|
|
| 3338 |
National Test House (ER), Kolkata
| IS 16014 (2024) - Mechanically woven, double - Twisted, hexagonal wire mesh gabions, revet mattresses, rock fall netting and other products for civil engineering purposes (Galvanized Steel Wire Or Galvanized Steel Wire With Polymer Coating) - Specification (First Revision) |
Mechanically woven, double - Twisted, hexagonal wire mesh gabions, revet mattresses, rock fall netting and other products for civil engineering purposes (Galvanized Steel Wire Or Galvanized Steel Wire With Polymer Coating) - Specification (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.1 (Tensile Strength of Mesh Wire(Steel)) |
2000.0 |
|
| 6.1 (Elongation of Mesh Wire) |
1000.0 |
|
| 8 (Diameter of Mesh Wire without Polymer Coating) |
1000.0 |
|
| 7.1 (Mass of Zinc/Zinc Alloy Coating of Mesh Wire) |
2000.0 |
|
| 7.2 (Specific Gravity of Polymer Coating Material of Mesh Wire) |
1000.0 |
|
| 7.2 (Tensile Strength of Polymer Coating Material of Mesh Wire) |
1000.0 |
|
| 7.2 (Hardness of Polymer Coating Material of Mesh Wire) |
1000.0 |
|
| 8 (Diameter of Mesh Wire without Polymer Coating) |
1000.0 |
|
| 8 (Mesh Size) |
1000.0 |
|
| 8 (Thickness of Polymer Coating of Mesh Wire) |
1000.0 |
|
| 8 (Mesh Size) |
1000.0 |
|
| 8 (Diameter of Edge/Selvedge Wire without Polymer Coating) |
1000.0 |
|
| 8 (Diameter of Lacing Wire without Polymer Coating) |
500.0 |
|
| 8 (Diameter of Mesh Wire with Polymer Coating) |
500.0 |
|
| 8 (Size of Gabion Box/ Revet Mattress/ Reinforced Soil Structure (L x W x H)) |
1000.0 |
|
| 8 (Size of Sack Gabion (L x D)) |
1000.0 |
|
| 8 (Size of Rockfall Netting (L x W)) |
1000.0 |
|
| 6.1 (Tensile Strength of Edge/Selvedge Wire (steel)) |
2000.0 |
|
| 6.1 (Tensile Strength of Lacing Wire(steel)) |
2000.0 |
|
| 6.1 (Elongation of Edge/Selvedge Wire) |
1000.0 |
|
| 6.1 (Elongation of Lacing Wire) |
1000.0 |
|
| 7.1 (Mass of Zinc/Zinc Alloy Coating of Edge/Selvedge Wire) |
2000.0 |
|
| 7.1 (Mass of Zinc/Zinc Alloy Coating of Lacing Wire) |
2000.0 |
|
| 7.2 (Hardness of Polymer Coating Material of Edge/Selvedge Wire) |
1000.0 |
|
| 7.2 (Tensile Strength of Polymer Coating Material of Edge/Selvedge Wire) |
1000.0 |
|
| 7.2 (Tensile Strength of Polymer Coating Material of Lacing Wire) |
1000.0 |
|
| 7.2 (Specific Gravity of Polymer Coating Material of Edge/Selvedge Wire) |
1000.0 |
|
| 7.2 (Specific Gravity of Polymer Coating Material of Lacing Wire) |
1000.0 |
|
| 8 (Thickness of Polymer Coating of Edge/Selvedge Wire) |
1000.0 |
|
| 8 (Thickness of Polymer Coating of Lacing Wire) |
1000.0 |
|
| 8 (Diameter of Edge/Selvedge Wire with Polymer Coating) |
1000.0 |
|
| 7.2 (Hardness of Polymer Coating Material of Lacing Wire) |
1000.0 |
|
|
| 3339 |
National Test House (ER), Kolkata
| LP -01 (Emergency Light) - Testing of LED Emergency Light |
Testing of LED Emergency Light |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Total Luminous Flux (lm)) |
5000.0 |
|
|
| 3340 |
National Test House (WR), Mumbai
| IS 3099 : Part 1 AND 2 (1992) - Microscopes - Slips and slidesspecification: Part 1 microscope slips: Part 2 microscope slides (First Revision) |
Microscopes - Slips and slidesspecification: Part 1 microscope slips: Part 2 microscope slides (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8 (Marking) |
200.0 |
|
| 7 (Packaging) |
200.0 |
|
| 6 (sampling) |
200.0 |
|
| 5.2 (Edge Quality) |
200.0 |
|
| 5.1 (Surface Finish) |
200.0 |
|
| 4 (Visible Seed) |
500.0 |
|
| 3.1 (Thickness ) |
500.0 |
|
| 3 ( Width) |
500.0 |
|
| 3 (Length) |
500.0 |
|
| 2.1 (Refractive Index) |
1000.0 |
|
|
| 3341 |
National Test House (WR), Mumbai
| IS 5523 (1983) - Methods of testing anodic coatings on aluminium and its alloys (First Revision) |
Methods of testing anodic coatings on aluminium and its alloys (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IS 5523 (Coating thickness) |
2000.0 |
|
|
| 3342 |
National Test House (WR), Mumbai
| IS 7318 : Part 1 (1974) - Approval test for welders when welding procedure approval is not required: Part 1 fusion welding of steel |
Approval test for welders when welding procedure approval is not required: Part 1 fusion welding of steel |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| NA (Radiography examination) |
1000.0 |
|
|
| 3343 |
National Test House (WR), Mumbai
| IS 2830 (2012) - Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision) |
Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 10.1(b) (Sulphur print test) |
3500.0 |
|
|
| 3344 |
National Test House (SR), Chennai
| IS 15997 (2012) - Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification |
Low nickel austenitic stainless steel sheet and strip for utensils and kitchen appliances - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 3345 |
National Test House (SR), Chennai
| IS 7491 (1989) - Sewing machines, household accuracy requirements (First Revision) |
Sewing machines, household accuracy requirements (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 2.1, Sl. No. 1 (Feed dog: Height of feed dog teeth from needle plate) |
500.0 |
|
| 2.1, Sl. No. 2 (Shuttle and shuttle driver: Clearance between heel of shuttle and corresponding tip of shuttle driver) |
500.0 |
|
| 2.1, Sl. No. 3 (Presser foot: Gap between presser foot & needle plate) |
500.0 |
|
| 2.2, Sl. No. 1 (Needle bar (Needle bar at lower most position)
In the direction of motion, mm.
At right angle to the direction of motion, mm.
(i) fig. 4B
(ii) fig. 4C) |
500.0 |
|
| 2.2, Sl. No. 2 (Thread take up lever
In the direction of motion, mm.
(i) Thread take up lever at top position.
(ii) Thread take up lever at intermediate position.
(iii) Thread take up lever at bottom position, mm.
(iv) At right angle to direction of motion, mm.) |
500.0 |
|
| 2.2, Sl. No. 3 (Shuttle (Along the axis of pin)
a) Tip of pin at needle bar positions:
(i) Topmost position, mm.
(ii) Bottommost position, mm.
b) Difference between two indicator readings when needle bar is at its highest and lowest position, mm.) |
500.0 |
|
| 2.2, Sl. No. 4 (Arm shaft (At different fly wheel positions)) |
500.0 |
|
| 2.2, Sl. No. 5 (Eccentricity of Fly wheel in the radial direction) |
500.0 |
|
| 2.2, Sl. No. 6 (Feed Section (At its highest position above needle plate)) |
500.0 |
|
|
| 3346 |
National Test House (WR), Mumbai
| IS 710 (2010) - Marine plywood - Specification (Second Revision) |
Marine plywood - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 3347 |
National Test House (WR), Mumbai
| IS 1003 : Part 1 (2003) - Timber Panelled and Glazed shutters |
Timber Panelled and Glazed shutters |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 10 (Glazing -IS 1003 (Part 1) : 2003) |
1000.0 |
|
|
| 3348 |
National Test House (WR), Mumbai
| IS 15622 (2017) - Pressed Ceramic Tiles - Specification (First Revision) |
Pressed Ceramic Tiles - Specification (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6, Tables 5 to 9, Sl No (i), (f) (Surface Quality-IS13630 (Part1):2019) |
500.0 |
|
| 6, Tables 5 to 9, Sl No (i), (a) (Dimensions-Length-IS13630 (Part1):2019) |
1000.0 |
|
| 6, Tables 5 to 9, Sl No (i), (a) (Dimensions-Width -IS:13630 (Part1):2019) |
1000.0 |
|
| 6, Tables 5 to 9, Sl No (i), (b) (Dimension-Thickness-Deviation in percent from work size -IS: 13630 (Part1):2019) |
1000.0 |
|
| 6, Tables 5 to 9, Sl No (ii), (a) (Water Absorption-IS13630 (Part 2):2019) |
1000.0 |
|
| 6, Tables 5 to 9, Sl No (ii), (b) (Modulus of rupture in N/mm²- IS13630 (Part6):2019) |
2000.0 |
|
| 6, Tables 5 to 9, Sl No (ii), (c) (Breaking of strength in N- IS13630 (Part 6):2019) |
2000.0 |
|
| 6, Tables 5 to 9, Sl No (ii), (e) (Scratch Hardness of surface (Mohs' Scale)-IS13630 (Part 13):2019) |
2000.0 |
|
| 6, Tables 5 to 9, Sl No (ii), (g) (Coefficient of Linear thermal expansion from ambient temperature to 100° C(K raise to -1)-IS 13630 (Part 4):2019) |
1000.0 |
|
| 6, Tables 5 to 9, Sl No (ii), (h) (Thermal shock resistance- IS 13630 (Part 5):2019) |
2000.0 |
|
| 6, Tables 8 and 9, Sl No (ii), (q) (Bulk Density-IS13630 (Part 2):2019) |
1000.0 |
|
| 6, Tables 5 to 9, Sl No (ii), (j) (Crazing Resistance- IS13630 (Part 9):2019) |
1500.0 |
|
| 6, Table 9, Sl No (iii), (a, b, c)-1(Part 8) (Chemical properties-glazed- IS13630 (Part 8):2019) |
5000.0 |
|
| 6, Table 9, Sl No (iii), (a,b,c)-2-(Part 7) (Chemical properties-Unglazed-IS13630 (Part 7):2019) |
5000.0 |
|
| 6, Tables 5 to 9, Sl No (i), (e-1,2,3) (Surface Flatness-Maximum deviation in percent from flatness-(Centre curvature, Edge curvature & warpage) -IS: 13630 (Part1):2019) |
500.0 |
|
| 6, Tables 5 to 9, Sl No (i), (c) (Straightness of sides(Facial sides)Maximum deviation in percent to corresponding work size- IS13630 (Part1):2019) |
500.0 |
|
| 6, Tables 5 to 9, Sl No (i), (d) (Rectangularity-Maximum deviation in percent to corresponding work size-IS: 13630 (Part1):2019) |
500.0 |
|
| 6, Tables 5 to 9, Sl No (iii), (a) (Resistance to staining IS 13630(8)/(7):2019) |
1000.0 |
|
| 6, Tables 5 to 9, Sl No (iii), (b) (Resistance to household chemicals swimming pools, and water cleansers except to cleansing agents containing hydrofluoric acid and its compounds IS 13630(8)/(7):2019) |
1000.0 |
|
| 6, Tables 5 to 9, Sl No (iii), (c) (Resistance to acid and alkalies (with exception of hydrofloric acid and its compounds-IS 13630(8)/(7):2019) |
1000.0 |
|
| 6, Tables 5 to 9, Sl No (ii), (k) (Impact resistance-Coefficient of Restitution-IS13630 (Part 14):2019) |
1000.0 |
|
| 6, Tables 5 to 9, Sl No (ii), (f) (Resistance to Surface Abrasion of Glazed Tiles(Class I to V Floor Tiles)-IS13630 (Part 11):2019) |
2000.0 |
|
| 6, Tables 5 to 9, Sl No (ii), (d) (Moisture expansion in mm/m-IS13630 (Part 3):2019) |
1000.0 |
|
|
| 3349 |
National Test House (ER), Kolkata
| IS 5493 (1981) - Dimensions for wrought copper and copper alloy tubes (First Revision) |
Dimensions for wrought copper and copper alloy tubes (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 2.1 (Out Side Diameter) |
1000.0 |
|
| 2.2 (Thickness) |
1000.0 |
|
| 2.3 (Roundness) |
1000.0 |
|
|
| 3350 |
National Test House (WR), Mumbai
| IS 6304 (1992) - Stationary batteries - Lead - Acid type - With pasted positive plates - Specification (Second Revision) |
Stationary batteries - Lead - Acid type - With pasted positive plates - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8.8.2 (Watt Hour Efficiency) |
7500.0 |
|
|
| 3351 |
National Test House (WR), Mumbai
| IS 4000 (1992) - Code for practice for High strength bolts in steel structures |
Code for practice for High strength bolts in steel structures |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.4.1 (Slip Factor - Surface Blasted with shot or grit with any loose rust removed, no pitting - consideration of 3 Specimens) |
18000.0 |
|
| 5.4.1 (Slip Factor - Surface blasted with shot or grit and hot-dip galvanized - consideration of 3 Specimens) |
18000.0 |
|
| 5.4.1 (Slip Factor- Surface blasted with shot or grit and spray-metallized with zinc ( thickness 50-70 microns) - consideration of 3 Specimens) |
18000.0 |
|
| 5.4.1 (Slip Factor- Surfaces Blasted with shot or grit and painted with ethyl-zinc silicate coat ( thickness 30-60 microns) - consideration of 3 Specimens) |
18000.0 |
|
| 5.4.1 (Slip Factor - Surfaces Blasted with shot or grit and painted with ethyl-zinc silicate coat (thickness 60-80 microns) - consideration of 3 Specimens) |
18000.0 |
|
| 5.4.1 (Slip Factor - Surfaces blasted with shot or grit and painted with alcali-zinc silicate coat (thickness 60-80 microns) - consideration of 3 Specimens) |
18000.0 |
|
| 5.4.1 (Slip Factor - Surface Blasted with shot or grit and spraymetallized with aluminium (thickness >50 microns) - consideration of 3 Specimens) |
18000.0 |
|
| 5.4.1 (Slip Factor - Surface Not Treated - consideration of 3 Specimens) |
18000.0 |
|
| 5.4.1 (Slip Factor - Surface Not Treated - consideration of 5 Specimens) |
30000.0 |
|
| 5.4.1 (Slip Factor - Surface Blasted with shot or grit with any loose rust removed, no pitting - consideration of 5 Specimens) |
30000.0 |
|
| 5.4.1 (Slip Factor - Surface blasted with shot or grit and hot-dip galvanized - consideration of 5 Specimens) |
30000.0 |
|
| 5.4.1 (Slip Factor- Surface blasted with shot or grit and spray-metallized with zinc ( thickness 50-70 microns) - consideration of 5 Specimens) |
30000.0 |
|
| 5.4.1 (Slip Factor- Surfaces Blasted with shot or grit and painted with ethyl-zinc silicate coat ( thickness 30-60 microns) - consideration of 5 Specimens) |
30000.0 |
|
| 5.4.1 (Slip Factor - Surfaces Blasted with shot or grit and painted with ethyl-zinc silicate coat (thickness 60-80 microns) - consideration of 5 Specimens) |
30000.0 |
|
| 5.4.1 (Slip Factor - Surfaces blasted with shot or grit and painted with alcali-zinc silicate coat (thickness 60-80 microns)- consideration of 5 Specimens) |
30000.0 |
|
| 5.4.1 (Slip Factor - Surface Blasted with shot or grit and spraymetallized with aluminium (thickness >50 microns)- consideration of 5 Specimens) |
30000.0 |
|
| B-4 (Slip Load for Slip Factor - Surface Blasted with shot or grit without Paint/Coat) |
6000.0 |
|
| B-4 (Slip Load for Slip Factor - Surface Blasted with shot or grit and Painted/ Coated) |
6000.0 |
|
|
| 3352 |
National Test House (ER), Kolkata
| ICAO Annex 14 - On the lines of ICAO annexure 14(test for aviation obstruction light) |
On the lines of ICAO annexure 14(test for aviation obstruction light) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| A.1 (Peak Intensity (cd) in single-mode (non flashing mode)) |
10000.0 |
|
| A.2 (Peak Intensity (cd) in dual mode (non flashing mode )) |
20000.0 |
|
|
| 3353 |
National Test House (WR), Mumbai
| IS 303 (1989) - Plywood for General Purposes - |
Plywood for General Purposes - |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9 (Workmanship & Finish-IS 303:1989) |
500.0 |
|
| 5, Table 1 & 2 (Classification by Appearance-IS 303:1989) |
2000.0 |
|
| 8 & Table 3 (Dimensions and Tolerances-IS 303:1989, Annex C) |
2000.0 |
|
| 11.3 (Moisture content-IS 1734 (Part 1):1983) |
1000.0 |
|
| 11.4 & Table 4 (Static Bending Strength-IS 1734 (Part 11):1983) |
3000.0 |
|
| 11.2.1 (Glue Adhesion-Water Resistance Test- IS 303:1989 & IS 1734 (Part 5):1983) |
2000.0 |
|
| 11.2.2 (Glue Adhesion-Mycological Test -IS 1734 (Part 7):1983 & IS 1734 (Part 5):1983) |
1500.0 |
|
|
| 3354 |
National Test House (NR), Ghaziabad
| IS 2713 : PART 1 TO 3 (1980) - Tubular Steel Poles for Overhead Power Lines |
Tubular Steel Poles for Overhead Power Lines |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8.4 (Weight of Pole) |
1000.0 |
|
| 15.1 (Dimension of Base Plate) |
1000.0 |
|
| 8.1 (Outside Diameter (Top, Middle , Bottom Section of Pole)) |
3000.0 |
|
| 8.3 (Length (Overall Length, Top, Middle , Bottom Section of Pole)) |
4000.0 |
|
| 8.2 (Thickness (Top, Middle , Bottom Section of Pole)) |
3000.0 |
|
| 8.5 (Straightness) |
1000.0 |
|
| 7 (Freedom from defect) |
1000.0 |
|
| 10.1.3 (Deflection Test) |
1000.0 |
|
| 10.1.4 (Permanent Set Test) |
1500.0 |
|
| 10.1.5 (Drop Test) |
1000.0 |
|
| 6 (Chemical Composition (Top, Middle , Bottom Section of Pole)) |
4500.0 |
|
| 11.2 of IS 1161: 2014 (Tensile Test (Top, Middle , Bottom Section)) |
9000.0 |
|
| 11.3.2 of IS 1161: 2014 (Flattening test (Top, Middle , Bottom Section of Pole)) |
3000.0 |
|
| 13.2 (Protection against corrosion (Galvanized Test)) |
2000.0 |
|
|
| 3355 |
National Test House (NR), Ghaziabad
| 2026 (Part-11) (2021) - Specification for dry - Type power transformers |
Specification for dry - Type power transformers |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 13.1.(a) (Measurement of Winding Resistance) |
1000.0 |
|
| 13.1.(b) (Measurement of Voltage ratio & voltage vector relationship test) |
2000.0 |
|
| 13.1.(c) (Measurement of lmpedance Voltage
,Short Circuit lmpedance and Load Loss) |
8000.0 |
|
| 13.1.(d) (Measurement of No Load Loss & Current) |
6000.0 |
|
| 13.1.(e) (Separate source Voltage withstand test) |
2500.0 |
|
| 13.1.(f) (lnduced Over voltage withstand test) |
4000.0 |
|
| 13.1(g) (Lightning Impulse Test) |
65000.0 |
|
| 13.1.(h) (Temperature Rise Test) |
40000.0 |
|
| 13.3.(b) (Measurement of acoustic sound Level) |
7000.0 |
|
|
| 3356 |
National Test House (NR), Ghaziabad
| IS 4454 : Part 1 (2001) - Steel wire for mechanical springs - Specification: Part 1 cold drawn unalloyed steel wire (Third Revision) |
Steel wire for mechanical springs - Specification: Part 1 cold drawn unalloyed steel wire (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 10.1 (Tensile Strength) |
3000.0 |
|
| 9 (Dimensions) |
1000.0 |
|
|
| 3357 |
National Test House (NR), Ghaziabad
| IS 15622 (2017) - Pressed Ceramic Tiles - Specification (First Revision) |
Pressed Ceramic Tiles - Specification (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6, Tables 5 to 9, Sl No (iii), (a) (Resistance to staining IS 13630(8)/(7):2019) |
1000.0 |
|
| 6, Tables 5 to 9, Sl No (iii), (b) (Resistance to household chemicals swimming pools, and water cleansers except to cleansing agents containing hydrofluoric acid and its compounds IS 13630(8)/(7):2019) |
1000.0 |
|
| 6, Tables 5 to 9, Sl No (iii), (c) (Resistance to acid and alkalies (with exception of hydrofloric acid and its compounds-IS 13630(8)/(7):2019) |
1000.0 |
|
| 6, Tables 5 to 9, Sl No (i), (f) (Surface Quality-IS13630 (Part1):2019) |
500.0 |
|
| 6, Tables 5 to 9, Sl No (i), (a) (Dimensions-Length-IS13630 (Part1):2019) |
1000.0 |
|
| 6, Tables 5 to 9, Sl No (i), (a) (Dimensions-Width -IS:13630 (Part1):2019) |
1000.0 |
|
| 6, Tables 5 to 9, Sl No (i), (b) (Dimension-Thickness-Deviation in percent from work size -IS: 13630 (Part1):2019) |
1000.0 |
|
| 6, Tables 5 to 9, Sl No (i), (d) (Rectangularity-Maximum deviation in percent to corresponding work size-IS: 13630 (Part1):2019) |
500.0 |
|
| 6, Tables 5 to 9, Sl No (i), (c) (Straightness of sides(Facial sides)Maximum deviation in percent to corresponding work size- IS13630 (Part1):2019) |
500.0 |
|
| 6, Tables 5 to 9, Sl No (i), (e-1,2,3) (Surface Flatness-Maximum deviation in percent from flatness-(Centre curvature, Edge curvature & warpage) -IS: 13630 (Part1):2019) |
500.0 |
|
| 6, Tables 5 to 9, Sl No (ii), (a) (Water Absorption-IS13630 (Part 2):2019) |
1000.0 |
|
| 6, Tables 5 to 9, Sl No (ii), (b) (Modulus of rupture in N/mm²- IS13630 (Part6):2019) |
2000.0 |
|
| 6, Tables 5 to 9, Sl No (ii), (c) (Breaking of strength in N- IS13630 (Part 6):2019) |
2000.0 |
|
| 6, Tables 5 to 9, Sl No (ii), (e) (Scratch Hardness of surface (Mohs' Scale)-IS13630 (Part 13):2019) |
2000.0 |
|
| 6, Tables 5 to 9, Sl No (ii), (j) (Crazing Resistance- IS13630 (Part 9):2019) |
1500.0 |
|
| 6, Tables 5 to 9, Sl No (ii), (k) (Impact resistance-Coefficient of Restitution-IS13630 (Part 14):2019) |
1000.0 |
|
| 6, Tables 8 and 9, Sl No (ii), (q) (Bulk Density-IS13630 (Part 2):2019) |
1000.0 |
|
| 6, Table 9, Sl No (iii), (a, b, c)-1(Part 8) (Chemical properties-glazed- IS13630 (Part 8):2019) |
5000.0 |
|
|
| 3358 |
National Test House (NR), Ghaziabad
| IS 1237 (2012) - Cement Concrete Flooring Tiles - Specification |
Cement Concrete Flooring Tiles - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 12.6 (Wet transverse strength-Annex F of IS 1237:2012) |
2000.0 |
|
| 12.5 (Water Absorption-Annex E of IS 1237:2012) |
1000.0 |
|
| 12.4 (Straightness-Annex D of IS 1237:2012) |
500.0 |
|
| 12.3 (Perpendicularity-Annex C of IS 1237:2012) |
500.0 |
|
| 10 (General Quality-IS 1237:2012) |
100.0 |
|
| 8.3 & Table2 (The thickness of Wearing Layer-IS 1237:2012) |
100.0 |
|
| 7, 8.2 & Table1 (Thickness & Tolerances-IS 1237:2012) |
100.0 |
|
| 7 & 8.1, Table1 (Dimensions & Tolerances-IS 1237:2012) |
200.0 |
|
| 12.7 (Resistance to wear-Annex G of IS 1237:2012) |
2500.0 |
|
|
| 3359 |
National Test House (NR), Ghaziabad
| IS 10262 (2019) - Concrete Mix Proportioning — Guidelines ( Second Revision ) |
Concrete Mix Proportioning — Guidelines ( Second Revision ) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Concrete Mix design (IS 10262:2019) with Admixture) |
35000.0 |
|
| 1 (Concrete Mix Proportioning — Guidelines (without admixture)) |
30000.0 |
|
|
| 3360 |
National Test House (NR), Ghaziabad
| IS 1489 : Part 2 (2015) - Portland - Pozzolana cement - Specification: Part 2 calcined clay based |
Portland - Pozzolana cement - Specification: Part 2 calcined clay based |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7, Table 2, Sl No 6 (Drying Shrinkage IS 4031(10):1988) |
1000.0 |
|
| 7, Table 2, Sl No 4c (28 Days Compressive strength, MPa- IS 4031(6):1988) |
1000.0 |
|
| 7, Table 2, Sl No 4b (7 Days Compressive strength,168±2 h, MPa- IS 4031(6):1988) |
1000.0 |
|
| 7, Table 2, Sl No 4a (3 Days Compressive strength,72±1 , MPa- IS 4031(6):1988) |
1000.0 |
|
| 7, Table 2, Sl No 3b (Setting time-Final, IS 4031(5):1988) |
250.0 |
|
| 7, Table 2, Sl No 3a (Setting time- Initial IS 4031(5):1988) |
250.0 |
|
| 7, Table 2, Sl No 2b (Soundness-autoclave method IS 4032(3):1988) |
1000.0 |
|
| 7, Table 2, Sl No 2a (Soundness-Lechatlier method IS 4032(3):1988) |
500.0 |
|
| 6, Table 1, Sl No 6 (Alkali content IS 4032:1985) |
2000.0 |
|
| 6, Table 1, Sl No 5 (Chloride content IS 4032:1985) |
800.0 |
|
| 6, Table 1, Sl No 4 (Loss on Ignition IS 4032:1985) |
800.0 |
|
| 6, Table 1, Sl No 3 (Total Sulphur content IS 4032:1985) |
800.0 |
|
| 6, Table 1, Sl No 2 (Magnesia IS 4032:1985) |
800.0 |
|
| 6, Table 1, Sl No 1 (Insoluble residue IS 4032:1985) |
800.0 |
|
|
