NTH - Management Information System

Search by Standard No.

Reset

4236 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

3361

National Test House (WR), Mumbai

IS 6419 (1996) - Welding rods and bare electrodes for gas shielded arc welding of structural steel - Specification (First Revision)

Welding rods and bare electrodes for gas shielded arc welding of structural steel - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
14.3.3 (All weld Impact test)	3000.0
14.3.2 (All weld Tensile test)	3000.0
14.3.1 (Preparation of Weld assembly)	5000.0
14.2 (Radiography Test)	1000.0
10.2.3 (Helix)	250.0
10.2.2 (Cast)	250.0
10.2.1 (Temper)	500.0
10.1 (Finish)	250.0
8.1 (Dimension of Spools)	250.0

3362

National Test House (ER), Kolkata

IS 15658 (2021) - Concrete Paving Blocks - Specification ( First Revision )

Concrete Paving Blocks - Specification ( First Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.3, Table 3, Sl No (iii) (Abrasion Resistance-(Dry condition)-IS 15658:2021, Annex E)	4000.0
7.3, , Table 3, Sl No (v) (Flexural strength-IS 15658:2021, Annex G)	4000.0
7.3, Table 3, Sl No (i) (Water Absorption-IS 15658:2021, Annex C)	1000.0
7.3, Table 3, Sl No (ii) (Compressive Strength-IS 15658:2021, Annex D)	4000.0
7.2, Table2 (Dimensions & Tolerances-IS 15658:2021, Annex B)	3000.0
7.1 (General quality & Finish-IS 15658:2021)	1000.0
7.3, Table 3, Sl No (iii) (Abrasion Resistance-(Wet condition)-IS 15658:2021, Annex E)	4000.0
7.3, Table 3, Sl No (iv) (Tensile Splitting Strength-IS 15658:2021, Annex F)	4000.0
3.2 (Thickness (Average Value), mm)	1000.0

3363

National Test House (NR), Ghaziabad

IS:8362Cl:4.1 Table 1 (1977) - Copper & Copper Alloy Rolled Platesfor Condensors & Heat Exchangers

Copper & Copper Alloy Rolled Platesfor Condensors & Heat Exchangers

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS:8362 Cl 4.1 Table 1 (Please see Annexure.)	10000.0

3364

National Test House (ER), Kolkata

NTHER Calibration of noncontact type temperature indicator - Calibration of noncontact type temperature indicator

Calibration of noncontact type temperature indicator

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (Temperature)	1000.0
A.2 (Temperature)	1500.0
A.3 (Temperature)	2000.0
A.4 (Temperature)	2500.0

3365

National Test House (ER), Kolkata

NTHER Calibration of Insulation Tester - Calibration of Insulation Tester

Calibration of Insulation Tester

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (Insulation Resistance - Voltage Range-100V)	1000.0
A.2 (Insulation Resistance - Voltage Range-500V)	1200.0
A.3 (Insulation Resistance - Voltage Range-1000V)	1500.0
A.4 (Insulation Resistance - Voltage Range-2500V)	2000.0
A.5 (Insulation Resistance - Voltage Range-5000V)	2500.0

3366

National Test House (ER), Kolkata

NTHER Calibration of Power Factor meter - Calibration of Power Factor meter

Calibration of Power Factor meter

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (Power Factor (pf))	1200.0

3367

National Test House (ER), Kolkata

NTHER Calibration of frequency meter - Calibration of frequency

Calibration of frequency

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (Frequency up to 1kHz)	1000.0
A.2 (Frequency up to 1MHz)	1500.0
A.3 (Frequency up to 100 MHz)	2000.0
A.4 (Frequency up to 300 MHz)	2500.0
A.5 (Frequency up to 3 GHz)	3500.0

3368

National Test House (ER), Kolkata

NTHER Calibration of decade Resistance - Calibration of decade Resistance

Calibration of decade Resistance

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (Resistance up to 1GigaOhm)	2500.0
A.2 (Resistance up to 20 Giga Ohm)	3500.0
A.3 (Resistance up to 1 Tera Ohm)	4500.0

3369

National Test House (ER), Kolkata

NTHER -Calibration of Standard dc Resistance (Fixed point) - dc Resistance

dc Resistance

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (dc Resistance)	2000.0
A.2 (dc Resistance)	1200.0
A.3 (ac Resistance)	3000.0

3370

National Test House (ER), Kolkata

NTHER Calibration of Analog Ammeter - Calibration of Analog Ammeter

Calibration of Analog Ammeter

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (AC Current)	1200.0
A.2 (dc current)	1200.0

3371

National Test House (ER), Kolkata

NTHER Calibration of Digital Ammeter - Calibration of Digital Ammeter

Calibration of Digital Ammeter

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (AC Current)	1200.0
A.2 (dc Current)	1200.0

3372

National Test House (ER), Kolkata

NTHER -Calibration of Analog AC/DC Volt metert - Calibration of Analog AC/DC Volt meter

Calibration of Analog AC/DC Volt meter

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (AC Voltage)	1200.0
A.2 (DC Voltage)	1200.0

3373

National Test House (ER), Kolkata

NTHER Calibration of digital Voltmeter - Calibration of Voltmeter

Calibration of Voltmeter

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (AC Voltage)	1200.0
A.2 (dc Voltage)	1200.0

3374

National Test House (SR), Chennai

customer specification SR Chennai-AAS (2022) - customer specification SR Chennai-AAS

customer specification SR Chennai-AAS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2 (Iron (as Fe2O3))	1200.0
3 (Calcium (as CaO))	1200.0
1 (Aluminum (as Al2O3))	2400.0
4 (Total Silica (as SiO2))	1000.0
5 (Magnesium (as Mg))	2000.0
6 (Sodium (as Na))	1200.0

3375

National Test House (WR), Mumbai

Custom specification NTH WR General Chemicals - Custom specification NTH WR General Chemicals

Custom specification NTH WR General Chemicals

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Resistance to spent wash)	1500.0
- (Annexure for Organic Fertilizer)	10000.0

3376

National Test House (WR), Mumbai

Custom specification NTH WR Metal Sample - Custom specification NTH WR Metal Sample (OES)

Custom specification NTH WR Metal Sample (OES)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Custom specification NTH WR Metal Sample (Please refer annexure)	6000.0
custom specification NTH WR Metal OES (Carbon (C))	700.0
custom specification NTH WR Metal OES (Manganese (Mn))	700.0
custom specification NTH WR Metal OES (Silicon (Si))	700.0
custom specification NTH WR Metal OES (Sulphur (S))	700.0
custom specification NTH WR Metal OES (Phosphorus (P))	700.0
custom specification NTH WR Metal OES (Nickel (Ni))	700.0
custom specification NTH WR Metal OES (Molybdenum (Mo))	700.0
custom specification NTH WR Metal OES (Chromium (Cr))	700.0
custom specification NTH WR Metal OES (Titanium (Ti))	700.0
custom specification NTH WR Metal OES (Aluminium (as Al))	500.0
custom specification NTH WR Metal OES (Boron (as B))	500.0
custom specification NTH WR Metal OES (Mass of Zinc Coating)	1500.0
Custom specification NTH WR Metal Sample (Thickness of material (Aluminum and Copper))	2000.0
Custom specification NTH WR Metal Sample (Nature (Visual Examination))	1000.0
- (Nitrogen % content)	1000.0

3377

National Test House (WR), Mumbai

Custom specification NTH WR IS 101 & other paint - Custom specification NTH WR IS 101 & other paint test methods

Custom specification NTH WR IS 101 & other paint test methods

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Custom specification NTH WR IS 101 & other paint (Inter Laboratory Comparison (ILC Sample) : Please referred annexure for the observed values)	-
Custom specification NTH WR IS 101 & other paint (Volatile Organic Compounds (VOC))	4000.0
Custom specification NTH WR IS 101 & other paint (pH)	1200.0
Custom specification NTH WR IS 101 & other paint (Volume Solids (IS 101 (Part 8/Sec 6) : 1993))	2000.0
Custom specification NTH WR IS 101 & other paint (Lead as (Pb))	1200.0
Custom specification NTH WR IS 101 & other paint (Wet opacity)	1200.0
Custom specification NTH WR IS 101 & other paint (Pull of Adhesion (ASTM D 4541))	2000.0
Custom specification NTH WR IS 101 & other paint (Resistance to Alkali (Annex F IS 15489 : 2013))	1500.0
Custom specification NTH WR IS 101 & other paint (Toxic element: Chromium (VI) Atomic Absorption Spectrophotometric methods)	1200.0
Custom specification NTH WR IS 101 & other paint (Toxic element: Cadmium, Atomic Absorption Spectrophotometric methods)	1200.0
Custom specification NTH WR IS 101 & other paint (Toxic element: Mercury, Atomic Absorption Spectrophotometric methods)	1200.0
Custom specification NTH WR IS 101 & other paint (Drying Time: Surface dry)	1200.0
Custom specification NTH WR IS 101 & other paint (Drying time: Hard dry)	1200.0
Custom specification NTH WR IS 101 & other paint (Consistency)	1200.0
Custom specification NTH WR IS 101 & other paint (Accelerated storage stability at 60(+/- 2) deg.c)	3000.0
Custom specification NTH WR IS 101 & other paint (IMPACT RESISTANCE)	1500.0
Custom specification NTH WR IS 101 & other paint (Water Vapor Transmission (ASTM D 1653))	5000.0
Custom specification NTH WR IS 101 & other paint (Water Vapor Transmission)	5000.0
Custom specification NTH WR IS 101 & other paint (Flash Point (IS 101 (Part 1/Sec 6):1987)	1200.0
Custom specification NTH WR IS 101 & other paint (Abrasion Resistance, 1000 cycle, 1 kg load, (ASTM D 4060))	2000.0
Custom specification NTH WR IS 101 & other paint (Salt Spray test (IS 101 (Part 6/Sec 1) for 150 hrs)	6000.0
Custom specification NTH WR IS 101 & other paint (Durability: Accelerated Weathering Test by Xenon Arc for 150 hrs)	9000.0
Custom specification NTH WR IS 101 & other paint (Appearance (Visual))	1200.0
Custom specification NTH WR IS 101 & other paint (Specific Gravity @ 30 Deg. C.)	1200.0
Custom specification NTH WR IS 101 & other paint (Colour (Visual))	1200.0
Custom specification NTH WR IS 101 & other paint (Surface Drying Time @ 30 Deg. C (IS 101 (Part 3/Sec 1)) - 1986)	1200.0
Custom specification NTH WR IS 101 & other paint (Non Volatile Matter (Solid Content))	1200.0
Custom specification NTH WR IS 101 & other paint (Dry Film Thickness per coat, By Brush (IS 101 (Part 3/Sec 2)-89)	1200.0
Custom specification NTH WR IS 101 & other paint (Finish (IS 101 (Part 3/Sec 4)))	1200.0
Custom specification NTH WR IS 101 & other paint (Pencil Hardness (IS 101 (Part 5/Sec 1))-1988)	1200.0
Custom specification NTH WR IS 101 & other paint (Flexibility and adhesion (IS 101 (Part 5/Sec 2))-1988)	1200.0
Custom specification NTH WR IS 101 & other paint (Scratch Hardness, (IS 101 (Part 5/Sec. 2)-1988)	1200.0
Custom specification NTH WR IS 101 & other paint (Finish (IS 101 (Part 3/Sec 4)))	1200.0
Custom specification NTH WR IS 101 & other paint (Gloss 60 deg Angle (IS 101 (Part 4/Sec 4))	1200.0
Custom specification NTH WR IS 101 & other paint (Gloss 45 deg Angle (IS 101 (Part 4/Sec 4))	1200.0
Custom specification NTH WR IS 101 & other paint (Mass per 10 liters ((IS 101 (Part 1/Sec 7) : 2020))	1200.0
Custom specification NTH WR IS 101 & other paint (Volatile matter (IS 101 (Part 2/Sec 2) ))	1200.0
Custom specification NTH WR IS 101 & other paint (Stain Resistance Test (ASTM D 4828))	5000.0
IS 101 paint custom specification (Silver content by AAS method)	1200.0
Custom specification NTH WR IS 101 & other paint (Ash content (ASTM D 1650))	1500.0
Custom specification NTH WR IS 101 & other paint (Non volatile content (ISO 3251))	1200.0
Custom specification NTH WR IS 101 & other paint (Volatile Content (ISO 3251))	1200.0
RDSO (RDSO, Please see the annexure for test)	3000.0
Custom specification NTH WR IS 101 & other paint (Theoretical covering capacity)	1200.0
Custom specification NTH WR IS 101 & other paint (Binder Content (Active content) by Ignition Method)	1200.0
Custom specification NTH WR IS 101 & other paint (Water absorption test for 1 hr (ASTM D 570))	1500.0
Custom specification NTH WR IS 101 & other paint (WHITE CEMENT BASED POWDER PUTTY)	19400.0
Custom specification NTH WR IS 101 & other paint (ACRYLIC POWDER PUTTY)	19400.0
Custom specification NTH WR IS 101 & other paint (Pull off Adhesion Test (ASTM D 4541))	2000.0
Custom specification NTH WR IS 101 & other paint (Flexibility & Adhesion (ASTM D 522))	1200.0
Custom specification NTH WR IS 101 & other paint (Volume Solid (ASTM D 2697))	2000.0
Custom specification NTH WR IS 101 & other paint (Drying Time : Touch dry (ASTM D 1640))	1200.0
Custom specification NTH WR IS 101 & other paint (Drying Time: Hard Dry (ASTM D 1640))	1200.0
Custom specification NTH WR IS 101 & other paint (Cathodic disbandment @ Room temperature for 30 days (ASTM G 42))	10000.0
Custom specification NTH WR IS 101 & other paint (Water Resistance (Immersion))	1500.0
Custom specification NTH WR IS 101 & other paint (Cyclic corrosion test, 1008 hours, Salt Spray: 72 hrs, Drying in air: 16 hrs, UVA-340: 80 hrs One cycle: 168 hrs X 6 cycles (ASTM D 5894))	46080.0
Custom specification NTH WR IS 101 & other paint (UV Resistance - 100hrs)	6000.0
Custom specification NTH WR IS 101 & other paint (Abrasion Resistance, (1 Kg load, 1000 cycles, Wheel CS-10) , (ASTM D 4060))	2000.0
Custom specification NTH WR IS 101 & other paint (Impact Resistance (ASTM D 2794))	1500.0
Custom specification NTH WR IS 101 & other paint (Chemical resistance test for 24 hrs 10% HCl (ASTM D 543))	1500.0
Custom specification NTH WR IS 101 & other paint (Chemical Resistance Test for 24 hrs, 10% H2SO4 (ASTM D 543))	1500.0
Custom specification NTH WR IS 101 & other paint (Salt spray test for 100 hrs (ASTM B 117))	4000.0
Custom specification NTH WR IS 101 & other paint (Temperature resistance @ 200 Deg C (ASTM D 2485 Method A))	2000.0
Custom specification NTH WR IS 101 & other paint (Viscosity by Flow cup (B-4), IS 101 (Part 1/Sec 5))	1200.0
Custom specification NTH WR IS 101 & other paint (Low temperature flexibility after 1000 hrs)	7000.0
Custom specification NTH WR IS 101 & other paint (Low and High Service Temperature Limits)	5000.0
Custom specification NTH WR IS 101 & other paint (Accelerated Weathering Test, U V Lamp 340 (ASTM G 154) for 600 hrs)	36000.0
Custom specification NTH WR IS 101 & other paint (Resistance to Salt spray (ASTM B 117 for 500 hrs))	15000.0
Custom specification NTH WR IS 101 & other paint (Determination of Fineness of grind ((IS 101 (Part 3/ Sec 5): 2022)	1200.0
Accelerated Weathering Tests (Accelerated Weathering Tests (UV condensation type), IS 101 (Part 6/Sec 5): 1997 for 500 hr)	30000.0
Accelerated Weathering Tests (Accelerated Weathering Tests (UV condensation type), IS 101 (Part 6/Sec 5): 1997 for 1000 hr)	60000.0
Accelerated Weathering Tests (Accelerated Weathering Tests (UV condensation type), IS 101 (Part 6/Sec 5): 1997 for 1500 hr)	90000.0
Accelerated Weathering Tests (Accelerated Weathering Tests (UV condensation type), IS 101 (Part 6/Sec 5): 1997 for 2000 hr)	120000.0
Salt spray test (Salt spray test for 500 hrs (IS 101 (Part 6/Sec 1): 1988)	20000.0
Salt spray test (Salt spray test for 1000 hrs (IS 101 (Part 6/Sec 1): 1988)	40000.0
Custom specification NTH WR IS 101 & other paint (Viscosity by B 4 Flow Cup (IS 101 Part 1/Sec 5))	1200.0
Custom specification NTH WR IS 101 & other paint (Tack Free Drying Time (IS 101 Part 3/Sec 1))	1200.0
Custom specification NTH WR IS 101 & other paint (Coverage)	1500.0
Custom specification for paint samples (MEK Rub Test (ASTM D 5402))	1500.0
Custom specification for Paint Samples (Self-life (As per customer declaration))	1200.0
Custom specification for paint samples (Anti Grafiti Test (ASTM D 6578))	3000.0
Custom specification for paint samples (Identification of Material by FTIR)	2000.0
custom specification IS 101 (Volume Capacity of SS cup)	2000.0
- (Overcoating interval)	1200.0
Free formaldehyde (Free formaldehyde (ASTM D 6191))	5000.0
Custom specification NTH WR IS 101 & other paint test methods (Please refer the annexure for test results)	6000.0
Custom specification NTH WR IS 101 & other paint test methods (Please refer the annexure for the test result)	8400.0
Custom specification NTH WR IS 101 & other paint test methods (Please refer the annexure for the test result)	12000.0
Custom specification NTH WR IS 101 & other paint test methods (Please refer the annexure for the test result)	18000.0
Custom specification NTH WR IS 101 & other paint test methods (Please refer annexure for the test result)	24000.0
Custom specification NTH WR IS 101 & other paint test methods (Please refer annexure for the test result)	30000.0
Custom specification NTH WR IS 101 & other paint test methods (Please refer annexure for the test result)	32700.0
Custom specification NTH WR IS 101 & other paint (Accelerated Weathering Test: UV Light 340, 700 Hrs, (ASTM G 154), 4 Hrs UV 4 Hrs Condensation)	42000.0

3378

National Test House (WR), Mumbai

Custom specification NTH WR Two Component Paint & Coating System - Specification for Surface preparation and protective coating paint

Specification for Surface preparation and protective coating paint

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Please referred annexure)	20000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Water vapour permeability)	5000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Flash Point)	1200.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Volume Solid (ISO 3233))	2000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Dry Film Thickness (DFT) Per Coat)	1200.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Theortical Coverage capacity)	1200.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Weight per liter (Mix paint) (ISO 2811))	1200.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Specific Gravity (Base) (ISO 2811))	1200.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Specific gravity (Hardner) (ISO 2811))	1200.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Touch Dry @ 30 deg. C (ASTM D 1640))	1200.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Hard Dry @ 30 Deg. C (ASTM D 1640))	1200.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Full Cure @ 30 Deg. C (ASTM D 1640))	1200.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Over coating interval (ASTM D 1640))	1200.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Pot Life @ 30 deg. C.)	1500.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Pull Off Adhesion Test (ASTM D 4541))	2000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Abrasion Resistance, (1kg load, 1000 cycles, Wheel CS-17) (ASTM D 4060))	3000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Temp Resistance (ASTM D 2485 Method A))	5000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Temp Resistance (ASTM D 2485 Method B))	18000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Ash content (Mix paint) (ASTM D 1650))	1.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Non Volatile Matter (ISO 3251))	1200.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Volatile Matter (Mix Paint))	1200.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (100% Humidity test, duration 1440 hrs (ASTM D 2247))	45000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Thermal Shock Resistance Test (Method A): 5 cycles @ 30 minutes in furnace at 120 deg. C and 15 min in water after quenching in water for each cycle. (ASTM D 2485 Method A))	5000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Cathodic disbondment Test (ASTM G8 @ 30 days, Temp 20-30 deg.C))	10000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Volume Solid (ASTM D 2697))	2000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Tensile Strength after curing at 80 deg C for 8 hours (ASTM D 638))	2000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Elongation at break after curing at 80 deg C for 8 hours (ASTM D 638))	2000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Morten Heat Distortion Temperature test)	1500.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Water Absorption test)	1500.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Zinc Content (% Solid by mass) ASTM D 521)	2000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Tensile Strength (ASTM D 638))	2000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (% Elongation (ASTM D 638))	2000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Solid content (ISO 3233))	1200.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Impact Resistance (ASTM D 2794))	1500.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Water absorption (Immersion 30 days, ASTM D 570))	2000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Salt Spray Test (5% NaCl solution @ 35 deg C) 1440 hrs)	57600.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Holiday test (ASTM D 5162))	2000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Cyclic Test 4200 hrs:- Salt Spray : 72 hrs., Drying in air : 16 hrs., UV-A340 nm weather meter: 80 hrs. One cycle: 168 hrs. (25 cycles at 168 hrs. each cycle)(ASTM D5894))	200000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Chemical Resistance Test (ASTM D 543) a) 10% NaOH 1000 hrs)	5000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Chemical Resistance Test (ASTM D 543) b) 40% NaOH 1000 hrs)	5000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Chemical Resistance Test (ASTM D 543) c) 5% H2SO4 168 hrs)	2000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Chemical Resistance Test (ASTM D 543) d) Xylene 4 weeks)	3000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Chemical Resistance Test (ASTM D 543) e) Acetone 4 weeks)	3000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Chemical Resistance Test (ASTM D 543) f) Ethanol 4 weeks)	3000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Chemical Resistance Test (ASTM D 543) g) Kerosene 4 weeks)	3000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Chemical Resistance Test (ASTM D 870) Water Immersion Sea/DM Water, 2000 hrs.)	5000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Immersion in DM/DI water @ 90 Deg C for 30days (ASTM C 868))	5000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Cathodic disbondment test @ 60 deg C for 30 days (ASTM G8))	12000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Hardness: Shore D (ASTM D 2240))	2000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (APPERANCE)	1200.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Water Resistance (Water Immersion) @ 30 Deg C for 30 Days (ASTM D 870))	3000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Tensile Strength and Elongation @ break as per ASTM test method)	4000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Abrasion Resistance, (1kg load, 1000 cycles, Wheel H-18) (ASTM D 4060))	3000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (FINISH)	1200.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Pencil Hardness test (ASTM D 3363))	1500.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Dry Film Thickness (DFT) , ASTM D 1186)	1200.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Water Penetration (DIN 1048))	10000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Water Vapour Transmission (ASTM D 1653))	5000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Viscosity at 30 Deg C (ASTM D 5125))	1200.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Specific gravity at 30 Deg C (ASTM D 891))	1200.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Non Volatile Matter (Mix Paint) (ASTM D 1353))	1200.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Pot Life (ASTM D 562))	1500.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Recoatability (IS 101))	1200.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (UV Resistance for 2000hrs (Xenon arc air cool weatherometer) ASTM G 155)	120000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Number of coats)	1200.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Tensile strength (ASTM D 2370))	2000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Elongation (%) (ASTM D 2370))	2000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Shelf Life)	1200.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Scratch Hardness Test)	1200.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Adhesion by Tape Test (ASTM D 3359))	1500.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Salt spray test (ASTM B 117) for 1000 hrs.)	40000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Xenon Arc lamp Weatherometer (ASTM G 155) for 1000 hrs)	60000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Chemical Resistance- 10% H2SO4 for 7 days, Room temperature (ASTM D 543))	1500.0
Chemical resistance (Chemical Resistance - 30% NaOH for 7 days, Room temperature (ASTM D 543))	1500.0
Chemical resistance (Chemical resistance - Deionized water for 7 days, Room temperature (ASTM D 543))	1500.0
Humidity Resistance (Humidity Resistance - for 5000 hrs (ASTM D 2247))	138889.0
Water immersion (Pull off adhesion after High Temperature Water immersion - for 28 days @ 80 Deg C (ASTM D 543))	32000.0
Cathodic disbonding (Cathodic disbonding test- 7 days @ 95 Deg C (ASTM G 42/ ASTM G 8))	10000.0
Salt spray test (Resistance to salt spray - for 10000 hours (ASTM B 117))	300000.0
Pull off adhesion test (Pull off adhesion test after hot water immersion for 100 days @ 95 Deg C (ASTM D 4541 & ASTM D 543))	72000.0
Cathodic disbonding (Cathodic disbonding test- for 30days @ 95 Deg C (ASTM G 42/ ASTM G 8))	20000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Thermal ageing for 100 days at 150 Deg. C followed by adhesion test (ASTM D 4541/ISO 10289))	42000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Cathodic disbonding test- for 15 days @ 95 Deg C (ASTM G 42/ ASTM G 8))	15000.0
Two component paint (Immersion test - 5% Acetic Acid for 30 Days (ASTM D 543))	3000.0
TWO COMPONENT Paint & coating system (Immersion test - 25% H2SO4 for 30 days (ASTM D 543))	3000.0
TWO COMPONENT Paint & coating system (Immersion Test- 25% Na2Co3 for 30 days (ASTM D 543))	3000.0
TWO COMPONENT Paint & coating system (Immersion Test - 10% NaCl for 30 days (ASTM D 543))	3000.0
TWO COMPONENT Paint & coating system (Immersion Test - 25% NaOH for 30 days (ASTM D 543))	3000.0
TWO COMPONENT Paint & coating system (Immersion Test- 25 % Acetic Acid for 30 days (ASTM D 543))	3000.0
TWO COMPONENT Paint & coating system (Immersion Test- 25 % HCl for 30 days (ASTM D 543))	3000.0
TWO COMPONENT Paint & coating system (Immersion Test - 25 % HNO3 for 30 Days (ASTM D 543))	3000.0
TWO COMPONENT Paint & coating system (Ultraviolet (UV) Lamp Apparatus (Accelerated Weathering Tester) Lamp UV 313, 500 hrs)	30000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Resistance to humid poultice (Cataplasm test) (BS EN 13523 Part 27 : 2017))	10000.0
TWO COMPONENT Paint & coating system (Water Content (IS 101 (Part 2/Sec 1) : 2018)	1200.0
TWO COMPONENT Paint & coating system (Drying time Tack Free @ 30 deg.C)	1200.0
TWO COMPONENT Paint & coating system (Fastness to Light 100 Hrs (IS 101 (Part 4/Sec 3) : 1988)	5000.0
Paint coating (Ultraviolet (UV) Lamp Apparatus (Accelerated Weathering Tester) Lamp UV 313, 1000 hrs (Cycle: 4 hrs UV & 4 hrs condensation))	60000.0
Surface coating paint system (Thermal Stability Test (ASTM D 2485))	1500.0
Surface Coating System (Pull off adhesion test after thermal shock (ASTM D 4541))	2000.0
Two component paint system (Surface Dry (ASTM D 1640))	1200.0
Two component paint system (Sag Resistance)	2000.0
Two component paint system (Adhesion by Hatch Cut (ASTM D 3359 method B))	2000.0
Two component paint (Specific Gravity Mix Paint @ 30 Deg C)	1198.0
Two component paint (Volatile Organic Compound (VOC))	4000.0
Two component paint (Viscosity base, by B4 flow cup)	1200.0
Two component paint (Viscosity Hardener by B4 flow cup)	1200.0
Two component paint (Viscosity mix paint by B4 flow cup)	1200.0
Specification for Surface preparation and protective coating (Please refer annexure for the test results)	10000.0
Inorganic Zinc Silicate Paint (Please see the annexure for the test result:)	118450.0
Specification for Surface preparation and protective coating (Two Component Paint & Coating System) (Salt Spray Test for 300 hrs)	12000.0
Specification for Surface preparation and protective coating (Two Component Paint & Coating System) (Water absorption for immersion of 30 days at 65 Deg.C)	7000.0
Specification for Surface preparation and protective coating (Two Component Paint & Coating System) (Epoxy equivalent (Resin))	2000.0
Two component paint system (Chemical Resistance to continuous immersion in Seawater for 30 days)	2999.0
Custom specification NTH WR Two Component Paint & Coating System (Abrasion resistance - Weight 1000 gms, Cycles 5000, Wheel CS-17)	4997.0
Specification for Surface preparation and protective coating (Two Component Paint & Coating System) (Impact Test)	1500.0
RDSO M&C/ PCN/ 100/ 2018 (2018) - Specification for Epoxy Cum Polyurethane Painting System (Two Pack) for the Exterior Painting of Railway Coaches (Please refer annexure for the test result (Table 1 for full Gloss Polyurethane Enamel Two Pack) except for the parameter Unreacted monomer)	21000.0
Specification for Surface preparation and protective coating (Two Component Paint & Coating System) (cathodic disbondment test ASTM G42 at 80 Deg C)	10000.0
Specification for Surface preparation and protective coating (Two Component Paint & Coating System) (Cathodic Disbondment Test)	10000.0
Specification for Surface preparation and protective coating (Two Component Paint & Coating System) (WEATHERING TEST Xenon Arc/UV for 100 hrs)	6000.0
Custom specification NTH WR Two Component Paint & Coating System (Chemical resistance test - 30% NaOH, for 30 days (ASTM D 543))	3000.0
Custom specification NTH WR Two Component Paint & Coating System (Chemical resistance test - 20% NaCl, for 30 days (ASTM D 543))	3000.0
Custom specification NTH WR Two Component Paint & Coating System (Chemical resistance test - 10% H2SO4, for 30 days (ASTM D 543))	3000.0
Custom specification NTH WR Two Component Paint & Coating System (Chemical resistance test - Diesel, for 30 days (ASTM D 543))	4000.0
Custom specification NTH WR Two Component Paint & Coating System (Water Absorption test for 63 days (ASTM D 570))	3000.0
Custom specification NTH WR Two Component Paint & Coating System (Humidity Resistance, 1000hrs (ASTM D 4585))	30000.0
Custom specification NTH WR Two Component Paint & Coating System (Cathodic disbandment, 28 day (ASTM G 95))	10000.0
- (Water absorption at ambient temperature (ASTM D 570))	2000.0
- (Water absorption at temperature 65 Deg. C. (ASTM D 570))	7000.0
Chemical resistance (Chemical resistance : 50% Sulphuric acid, 168 hrs)	3000.0
Chemical resistance (Chemical resistance : 37% HCl, 168 hrs)	3000.0
Chemical resistance (Chemical resistance : 50% Nitric Acid, 168 hrs)	3000.0
Custom specification NTH WR Two Component Paint & Coating System (Ash content (Base), ASTM D 1650)	1200.0
Custom specification NTH WR Two Component Paint & Coating System (Ash content (Hardener), ASTM D 1650)	1200.0
Custom specification NTH WR Two Component Paint & Coating System (Non volatile matter (Base) ISO 3251)	1200.0
Custom specification NTH WR Two Component Paint & Coating System (Non volatile matter (Hardener) ISO 3251)	1200.0
Custom specification NTH WR Two Component Paint & Coating System (Volatile matter (Base), ASTM D 2369)	1200.0
Custom specification NTH WR Two Component Paint & Coating System (Volatile Matter (Hardener), ASTM D 2369)	1200.0
Custom specification NTH WR Two Component Paint & Coating System (Spectral data of film by FTIR)	2000.0
Two Component Paint & Coating System (Volume solid)	1999.0
Two Component Paint & Coating System (Pigment content)	1500.0
Two component paint system & Surface coating material (Zinc Poshphate in the total pigment content)	1500.0
Two Component Paint & Coating System (NVM)	1200.0
Two Component Paint & Coating System (Lamellar MIO)	1500.0
Two Component Paint & Coating System (Phthallic anhydride content of non-volatile vehicle)	2000.0
Two Component Paint & Coating System (Accelerated storage stability test at 60 Deg C, 96 hours)	3000.0
Two Component Paint & Coating System (Red oxide (as Fe2O3) in total pigment)	1500.0
Two Component Paint & Coating System (Metallic Zinc content)	1500.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Test: Chemical resistance @23 DegC to continuous immersion in firewater/DM water Standard: ISO 2812-1 Duration: 3 years)	15000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Test Name: Temperature resistance (ASTM D 2485) : -14 Deg C to 80 Deg C)	7000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Test name: Shelf life/Keeping properties of coating materials when unmixed and in closed container Temp 23 Deg C and Humidity 50% Duration: 12 months)	5000.0
Custom specification NTH WR TWO COMPONENT Paint & coating system Specification (Test Name: Operating temperature for continuous WET temperature Standard: ASTM D2485 : -14 Deg C to 60 Deg C)	7000.0
Two component paint (Abrasion Resistance Test - [H-18 Wheel, total 1 kg wt,1000 cycles, ASTM D 4060])	3000.0
Two component paint (Cyclic ageing test: [72 h of exposure to UVA-340 and condensation, 72 h of exposure to neutral salt spray, 24 h of exposure to low temperature at (−20 ± 2) °C, (Total 4200 hrs, No.25 cycles/168 hrs)]. ISO 12944)	205000.0
Two component paint (Cyclic ageing test: [72 h of exposure to UVA-340 and condensation, 72 h of exposure to neutral salt spray, 24 h of exposure to low temperature at (−20 ± 2) °C, (Total 2688 hrs, No.16 cycles/168 hrs)]. ISO 12944-6:2018-Annex B.)	133720.0
Two component paint (Cured Property: Cured at 25°C ±3°C for 7 days.)	1200.0
Specification for Surface preparation and protective coating paint (Chemical Resistance Test (ASTM D 543) - H2SO4 Solution pH = 5.0 to 5.5, 168 hrs, for system 11)	3000.0
Specification for Surface preparation and protective coating paint (Salt Spray Test (ASTM B 117), for 2500 hrs)	100000.0
Specification for Surface preparation and protective coating paint (Salt Spray Test (ASTM B 117), for 1000 Hrs)	40000.0
Specification for Surface preparation and protective coating paint (Salt Spray Test (ASTM B 117), for 2000 Hrs)	80000.0
Specification for Surface preparation and protective coating paint (Salt Spray Test (ASTM B 117), for 500 Hrs)	20000.0
Specification for Surface preparation and protective coating paint (Salt Spray Test (ASTM B 117), For 400 Hrs)	16000.0
Specification for Surface preparation and protective coating paint (Flexibility Test (ASTM D 522))	1200.0
Specification for Surface preparation and protective coating paint (Shore A hardness)	1000.0
Specification for Surface preparation and protective coating paint (Tensile Strength)	2000.0
Specification for Surface preparation and protective coating paint (Chemical resistance test: Acid (5% HCl), for 24 Hrs)	1500.0
Specification for Surface preparation and protective coating paint (Chemical resistance test: Alkalies /(5% NaOH), for 24 Hrs.)	1500.0
Specification for Surface preparation and protective coating paint (Chemical resistance test: Solvents (MTO), for 24 Hrs)	2000.0
Specification for Surface preparation and protective coating paint (Chemical resistance test: Salt (3% NaCl solution), for 24 Hrs)	1500.0
Specification for Surface preparation and protective coating paint (Water immersion, for 24Hrs)	1200.0
Specification for Surface preparation and protective coating paint (Chemical resistance test 48% NaOH for 30 days (ASTM D 543))	3000.0
Specification for Surface preparation and protective coating paint (UV Resistance test for 1000 Hrs: ASTM G 154 (4 Hrs UV 4 Hrs condensation, Lamp 340))	60000.0
Custom specification NTH WR Two Component Paint & Coating System (Salt Spray Test for 1440 hrs (ISO 9227))	57600.0
Specification for Surface preparation and protective coating paint (Please refer annexure for the test result)	2000.0
Specification for Surface preparation and protective coating paint (Please refer annexure for the test result)	5000.0
Specification for Surface preparation and protective coating paint (Chemical Resistance 5% HCl 30 days)	3000.0
Specification for Surface preparation and protective coating paint (Accelerated Weathering Tester (ASTM G 154) 2000 Hrs)	120000.0
Specification for Surface preparation and protective coating paint (Chemical Resistance 10% HCl, 30 Days)	3000.0
1 (Assessment of Adhesion and Artificial ageing - Applied and Conditioned for 720 hrs (ISO - 19277))	21600.0
2 (Assessment of Adhesion and Artificial ageing- Heat Conditioned for 480 hrs (ISO - 19277))	14400.0
3 (Cyclic Corrosion Test (ASTM D 5894) 15 Cycles of 72 hrs UV exposur + 72 hrs Salt spray + 24 hrs Condensation)	86400.0
4 (Cyclic Corrosion Test (ASTM D 5894) 10 Cycles of 72 hrs UV exposur + 72 hrs Salt spray + 24 hrs Condensation)	57600.0
5 (Salt Spray Test (ASTM B 117) for 480 hrs)	14400.0
6 (Salt Spray Test (ASTM B 117) for 1440 hrs)	43200.0
7 (QUV Test (ASTM G 154) for 480)	19200.0
8 (QUV Test (ASTM G 154) for 1440)	57600.0
9 (Humidity Test (ASTM D 2247) for 480 hrs)	9600.0
10 (Humidity Test (ASTM D 2247) for 1440 hrs)	28800.0

3379

National Test House (NR), Ghaziabad

ANSI B16.5 (2020) - Pipe Flanges and Flanged Fittings

Pipe Flanges and Flanged Fittings

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Thickness)	1000.0
6 (Bore Diameter)	1000.0
5 (Chemical Composition)	2500.0

3380

National Test House (NR), Ghaziabad

ASTM A234 (2018) - Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Chemical Composition)	-
9 (Tensile strength)	1000.0
9 (Yield Stress)	1000.0
9 (Elongation Percent)	1000.0
13 (Outside diameter)	1000.0
13 (Thickness)	1000.0

3381

National Test House (NR), Ghaziabad

ASTM 106 (2010) - Standard specification for Seamless Carbon Steel Pipe for high temperature service

Standard specification for Seamless Carbon Steel Pipe for high temperature service

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Chemical Composition)	5000.0
9 (Yield Stress)	1000.0
9 (Percent elongation at 5.65 of sq. root of Area)	1000.0
10 (Brinell Hardness test)	2000.0
9 (Tensile Strength)	1000.0

3382

National Test House (SR), Chennai

IS 15298 : PART 2 (2011) - Personal Protective Equipment Part 2 Safety Footwear

Personal Protective Equipment Part 2 Safety Footwear

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

3383

National Test House (NR), Ghaziabad

NTH/NR/CHEM/CUST-01 BATTERY PLATES (2022) - BATTERY PLATES FOR Lead TESTING

BATTERY PLATES FOR Lead TESTING

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Lead Oxide in formed positive plate)	1200.0
1.2 (Free Lead Content)	1200.0
1.3 (Lead Sulphate content)	1200.0

3384

National Test House (ER), Kolkata

IS : 1998:1962 ,Reaffirmed :2018 & IEC 60112:2003 - IS 1998 : Methods of test for thermosetting synthetic resin bonded laminated sheets IEC 60112:2003 :Methods of test for thermosetting synthetic resin bonded laminated sheets

IS 1998 : Methods of test for thermosetting synthetic resin bonded laminated sheets IEC 60112:2003 :Methods of test for thermosetting synthetic resin bonded laminated sheets

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl : 15 of IS 1998 (Insulation resistance after Immersion in water after 24 hrs. Measurement of Insulation Resistance between each pair of Electrode at Potential Difference of 500V DC+/-50VDC for 1 minutes, Insulation resistance shall be min. 10 ^4 Mega Ohms)	20000.0
Cl : 11.3 of IEC 60112 (Comparative Tracking Index, Maximum 50 drops withstand Voltage of 250V AC)	10000.0

3385

National Test House (NR), Ghaziabad

IS 456 (2000) - Plain and reinforced concrete - WATER FOR CONSTRUCTION (Fourth Revision)

Plain and reinforced concrete - WATER FOR CONSTRUCTION (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.4 (pH)	500.0
5.4 (Volume (in ml) of 0.02 (N) H2SO4 required for Neutralization of 100 ml water using mixed indicator.)	500.0
5.4 (Volume (in ml) of 0.02 (N) NaOH required for Neutralization of 100 ml water using phenolphthalein as an indicator.)	500.0
5.4 (Suspended Matter)	500.0
5.4 (Chlorides (as Cl))	1000.0
5.4 (Sulphates ( as SO3))	1000.0
5.4 (Total Inorganic Solids)	500.0
5.4 (Total Organic Solids)	500.0
5.4.1.2 (Test for Compressive strength (IS 516))	4000.0
5.4.1.3 (Initial setting time of test block with sample water compared with distilled water(IS 4031 (Part 5):1988)	2000.0

3386

National Test House (ER), Kolkata

IS 4970 & 1708 Identification of Wood & Moisture content (1973) - Key for Identification of Commercial Timbers

Key for Identification of Commercial Timbers

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Identification of Timber (IS 4970:1973))	5000.0
2 (Test for Moisture Content(IS 1708(Part 1):1986)	1000.0
3 (Test for Compressive strength parallel to grain(IS 1708(Part 8):1986)	1500.0
4 (Test for Compressive strength perpendicular to grain(IS 1708(Part 9):1986)	1500.0
5 (Test for Compressive strength Parallel to grain( IS 1708(8):1986 (with sample preparation))	3000.0

3387

National Test House (WR), Mumbai

EIL B224-000-79-41-PLS-01 : Part 5 (2019) - Job specification for surface preparation and protective coating

Job specification for surface preparation and protective coating

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
15.2 Table 15 (100% Humidity test)	28000.0
15.2 Table 15 (Chemical Resistance Test: Sea Water, 2000 hrs)	10000.0
15.2 Table 15 (Chemical Resistance Test: Kerosene, 4 weeks)	2000.0
15.2 Table 15 (Chemical Resistance Test: Ethanol, 4 weeks)	3000.0
15.2 Table 15 (Chemical Resistance Test: Acetone, 4 weeks)	3000.0
15.2 Table 15 (Chemical Resistance Test: Xylene, 4 weeks)	3000.0
15.2 Table 15 (Chemical Resistance Test: 5% H2S04, 168 hrs)	2000.0
15.2 Table 15 (Chemical Resistance Test: 40% NaOH, 1000 hrs)	5000.0
15.2 Table 15 (Chemical Resistance Test: 10% NaOH, 1000 hrs)	5000.0
15.2 Table 15 (Resistance to DM Water using water imersion )	5000.0
15.2 Table 15 (Immersion in DI/DM Water @90 Deg C )	5000.0
15.2 Table 15 (Cathodic disbondment Test)	10000.0
15.2 Table 15 (Thermal Shock Resistance Test (Method A): 5 cycles @ 30 minutes in furnace at 120 C and 1 min in water after quenching in water for each cycle.)	2500.0
15.2 Table 15 (Cyclic test (4200 Hours): Salt Spray : 72 hrs. Drying in air: 16 hrs. UV-A340 nm weather meter: 80 hrs.One cycle: 168 hrs. (25 cycles at 168 hrs. each cycle))	300000.0
6.0 Table 2 (Temperature Resistance at 90 deg C (Method A))	5000.0
6.0 Table 2 (Adhesion)	2000.0
6.0 Table 2 (Temperature Resistance at 150 deg C (Method A))	5000.0
6.0 Table 2 (Pot life at 30 deg C for two component paints)	1500.0
6.0 Table 2 (Over Coating interval at 20 degree & 50% RH)	1200.0
6.0 Table 2 (Full cure at 30 degree C(for immersion/high temperature service))	1200.0
6.0 Table 2 (Hard Dry at 30 deg C)	1200.0
6.0 Table 2 (Touch Dry at 30 deg C)	1200.0
6.0 Table 2 (Weight/litre)	1200.0
6.0 Table 2 (Theoretical covering capacity)	1200.0
6.0 Table 2 (DFT per coat)	1200.0
6.0 Table 2 (Volume Solids)	2000.0
6.0 Table 2 (Temperature Resistance at 650 deg C (Method B))	20000.0
6.0 Table 2 (Temperature Resistance at 125 deg C (Method A))	5000.0
6.0 Table 2 (Temperature Resistance at 540 deg C (Method B))	5000.0
6.0 Table 2 (Temperature Resistance at 540 deg C (Method B) Dry service)	20000.0
6.0 Table 2 (Temperature Resistance at 250 deg C (Method A))	5000.0
6.0 Table 2 (Temperature Resistance at 400 deg C (Method B))	5000.0
6.0 Table 2 (Temperature Resistance at 250 deg C (Method B) Dry service)	20000.0
6.0 Table 2 (Temperature Resistance at 400 deg C (Method B) Dry service)	20000.0
6.0 Table 2 (Temperature Resistance at 80 deg C (Method A))	5000.0
6.0 Table 2 (Temperature Resistance at 80 deg C (Method B) Dry service)	20000.0
6.0 Table 2 (Temperature Resistance at 80 deg C (Method A))	5000.0
6.0 Table 2 (Abrasion Resistance, with CS-10 wheel for 1000 g load for 1000 cycles)	3000.0
6.0 Table 2 (Abrasion Resistance, with CS-17 wheel for 1000 g load for 1000 cycles)	3000.0
1 (1)	-

3388

National Test House (NR), Ghaziabad

NTH/NR/RPPT/CSD/Fabric (2022) - Fabric or Textiles Finished Product Specification

Fabric or Textiles Finished Product Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Nomenclature of the item)	1000.0
1.2 (Dimensions)	1000.0
1.3 (Design)	1000.0
1.4 (Identification)	1000.0
1.5 (Color)	1000.0
1.7 (Count of Yarn)	2000.0
1.8 (Ends and Picks)	999.0
1.12 (Dimensional Changes)	2000.0
1.9 (Color Fastness to Light)	3000.0
1.10 (Color Fastness to Washing)	2000.0
1.11 (Color Fastness to Perspiration)	2000.0
1.6 (Blend Composition)	3000.0
1.14 (Type of Yarn)	1000.0
1.15 (Weight)	1000.0
1.16 (pH of Aqueous Extract)	1000.0
Firm's Requirement (Thermal Insulation Resistance Test)	5000.0

3389

National Test House (ER), Kolkata

IS 7071(Part 1 to 3 & 4) (1986 & 1989) - Ropes and Cordages - Methods of Physical Test

Ropes and Cordages - Methods of Physical Test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11.4 (Rope Diameter)	1000.0
1.0 (Rope Breaking Load)	5000.0
6.0 (Linear Density)	1000.0
3.13 (Pitch)	1000.0
Firm's request (Thermal stability of Rope)	6000.0

3390

National Test House (WR), Mumbai

OPTICAL FIBER CABLE - OPTICAL FIBER CABLE

OPTICAL FIBER CABLE

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Marking)	500.0
2 (Description of Optical Fiber Cable)	500.0
3 (Marking on Optical Fiber Cable)	500.0
4 (Construction of Optical Fiber Cable)	500.0
4.1(a) (Nos of Fibers)	1000.0
4.1(b) (Presence of Sheath/Covering in addition to coat on Fiber)	500.0
4.1(c) (Individual Sheathed of Fiber Cable)	8000.0
4.1(d) (Colour of Sheath)	500.0
4.1(e) (Mylar Fiber and Colour)	500.0
4.1(f) (Any other Detail of fiber cable)	500.0
4.1(g) (Colour of Jacket)	500.0
4.1(h) (Overall Diameter of Jacket)	500.0
4.1(i) (Transmission of Light Test of Fiber Cable)	1000.0
1 (Customs Specification)	30000.0
El/1 (confirms the plastic material against individual Fiber)	45000.0