| 3271 |
National Test House (ER), Kolkata
| RDSO/2007/GE:0014 November 2009 (November 2009) - Guidelines and Specifications for Design of Formation for Heavy Axle Load
(RDSO/2007/GE:0014 ) |
Guidelines and Specifications for Design of Formation for Heavy Axle Load
(RDSO/2007/GE:0014 ) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 12.1(i-a) (The uniformity coefficient (Cu)
IS 2720-1 (1983)/IS 1498 (1970)) |
1500.0 |
|
| 12.1.(i-b) (The Coefficient of Curvature (Cc)
IS 2720-1 (1983)/IS 1498 (1970)) |
1500.0 |
|
| 12.1.(ii) (Los Angeles Abrasion Value (IS 2386(4):1963)) |
1500.0 |
|
| 12.1(iv) (OMC & MDD (Proctor Test) [IS 2720 (Part 8)]) |
5000.0 |
|
| 12.2 (Sieve Analysis/Grading Percentage /Grain size distribution [IS 2720 (Part 4)]) |
5000.0 |
|
| - (Liquid Limit [IS 2720-5(1985)]) |
1000.0 |
|
| - (Plastic limit [IS 2720-5(1985)]) |
1000.0 |
|
| - (Shrinkage limit [IS 2720-6 (1972)]) |
1000.0 |
|
| 12.1.iv) (CBR value (Soaked)) |
6000.0 |
|
|
| 3272 |
National Test House (NR), Ghaziabad
| IS 1161 (2014) - Steel Tube for Structural Purposes |
Steel Tube for Structural Purposes |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.1 (Outside Diameter) |
500.0 |
|
| 6.1 (Thickness) |
500.0 |
|
| 6.1 (Weight) |
1000.0 |
|
| 7 (Workmanship) |
1000.0 |
|
| 9 (Straightness) |
1000.0 |
|
| 11.2 (Tensile Strength, MPa) |
1000.0 |
|
| 11.2 (Yield strength, MPa) |
1000.0 |
|
| 11.2 (Percent Elongation, %) |
1000.0 |
|
| 11.3 (Cold Bend test) |
- |
|
| 11.3 (Bend Test / Flattening test) |
1000.0 |
|
| 8 (Mass of Zinc Coating) |
2000.0 |
|
| 0 (Coating Thickness, micron) |
2000.0 |
|
| 0 (Uniformity of Coating) |
1000.0 |
|
| 0 (Overall Length) |
1000.0 |
|
| 0 (Adhesion test) |
1000.0 |
|
| 0 (Salt Spray Test) |
60000.0 |
|
|
| 3273 |
National Test House (NR), Ghaziabad
| RDSO SPEC M&C/PCN/103/2020 (2020) - SPECIFICATION FOR EPOXY BASED MICACEOUS IRON OXIDE (TWO- PACK) |
SPECIFICATION FOR EPOXY BASED MICACEOUS IRON OXIDE (TWO- PACK) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Cl 3 & 4 (Table-I & II) (Please see Annexures (All physico mechanical & Chemical tests)) |
40000.0 |
|
|
| 3274 |
National Test House (ER), Kolkata
| IS 516 : Part 4 (2018) - Hardened Concrete -Methods of Test -Part 4, Sampling, Preparing and Testing of Concrete Cores ( First Revision ) ( IS 516 :(Part 4):2018) |
Hardened Concrete -Methods of Test -Part 4, Sampling, Preparing and Testing of Concrete Cores ( First Revision ) ( IS 516 :(Part 4):2018) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8 (Equivalent Cube Strength of core samples with preparation, N/mm^2) |
5000.0 |
|
|
| 3275 |
National Test House (ER), Kolkata
| Custom-16-ER-LM - IV Pole for ICU Beds |
IV Pole for ICU Beds |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Yield Stress) |
1000.0 |
|
| 2 (Tensile Strength) |
1000.0 |
|
| 3 (Elongation) |
1000.0 |
|
| 4 (Outside Diameter) |
1000.0 |
|
| 5 (Thickness) |
1000.0 |
|
| 6 (Carbon) |
500.0 |
|
| 7 (Manganese) |
500.0 |
|
| 8 (Sulphur) |
500.0 |
|
| 9 (Phosphorus) |
500.0 |
|
| 10 (Bend Test) |
1000.0 |
|
| 11 (Hardness Test) |
2000.0 |
|
|
| 3276 |
National Test House (ER), Kolkata
| Custom-15-ER-LM - Metal Frame of TREATMENT COUCH |
Metal Frame of TREATMENT COUCH |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Yield Point or Proof Stress) |
1000.0 |
|
| 2 (Tensile Strength) |
1000.0 |
|
| 3 (Elongation) |
1000.0 |
|
| 4 (Thickness) |
1000.0 |
|
| 5 (Bend Test) |
1000.0 |
|
| 6 (Hardness Test) |
2000.0 |
|
| 7 (Cupping Test) |
3000.0 |
|
| 8 (Carbon) |
500.0 |
|
| 9 (Manganese) |
500.0 |
|
| 10 (Sulphur) |
500.0 |
|
| 11 (Phosphorus) |
500.0 |
|
| 12 (Powder Coating Thickness) |
2000.0 |
|
|
| 3277 |
National Test House (ER), Kolkata
| Custom-14-ER-LM - Metal Frame/Metal Sheet of of LOCKERS |
Metal Frame/Metal Sheet of of LOCKERS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Yield Point or Proof Stress) |
1000.0 |
|
| 2 (Tensile Strength) |
1000.0 |
|
| 3 (Elongation) |
1000.0 |
|
| 4 (Thickness) |
1000.0 |
|
| 5 (Bend Test) |
1000.0 |
|
| 6 (Hardness Test) |
2000.0 |
|
| 7 (Cupping Test) |
3000.0 |
|
| 8 (Carbon) |
500.0 |
|
| 9 (Manganese) |
500.0 |
|
| 10 (Sulphur) |
500.0 |
|
| 11 (Phosphorus) |
500.0 |
|
| 12 (Powder Coating Thickness) |
2000.0 |
|
|
| 3278 |
National Test House (ER), Kolkata
| Custom-13-ER-LM - Metal Frame of PATIENT CARE BEDS/Motorized & Semi-Motorized ICU BED |
Metal Frame of PATIENT CARE BEDS/Motorized & Semi-Motorized ICU BED |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Yield Point or Proof Stress) |
1000.0 |
|
| 2 (Tensile Strength) |
1000.0 |
|
| 3 (Elongation) |
1000.0 |
|
| 4 (Thickness) |
1000.0 |
|
| 5 (Bend Test) |
1000.0 |
|
| 6 (Hardness Test) |
2000.0 |
|
| 7 (Cupping Test) |
3000.0 |
|
| 8 (Carbon) |
500.0 |
|
| 9 (Manganese) |
500.0 |
|
| 10 (Sulphur) |
500.0 |
|
| 11 (Phosphorus) |
500.0 |
|
| 12 (Powder Coating Thickness) |
2000.0 |
|
|
| 3279 |
National Test House (ER), Kolkata
| Custom-12-ER-LM - Metal Frame/Metal Sheet of ALMIRAH |
Metal Frame/Metal Sheet of ALMIRAH |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Yield Point or Proof Stress) |
1000.0 |
|
| 2 (Tensile Strength) |
1000.0 |
|
| 3 (Elongation) |
1000.0 |
|
| 4 (Thickness) |
1000.0 |
|
| 5 (Bend Test) |
1000.0 |
|
| 6 (Hardness Test) |
2000.0 |
|
| 7 (Cupping Test) |
3000.0 |
|
| 8 (Carbon) |
500.0 |
|
| 9 (Manganese) |
500.0 |
|
| 10 (Sulphur) |
500.0 |
|
| 11 (Phosphorus) |
500.0 |
|
| 12 (Powder Coating Thickness) |
2000.0 |
|
|
| 3280 |
National Test House (ER), Kolkata
| Custom-11-ER-LM - Metal Frame of WAITING CHAIR 03 SEATER |
Metal Frame of WAITING CHAIR 03 SEATER |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Yield Point or Proof Stress) |
1000.0 |
|
| 2 (Tensile Strength) |
1000.0 |
|
| 3 (Elongation) |
1000.0 |
|
| 4 (Thickness) |
1000.0 |
|
| 5 (Bend Test) |
1000.0 |
|
| 6 (Hardness Test) |
2000.0 |
|
| 7 (Cupping Test) |
3000.0 |
|
| 8 (Carbon) |
500.0 |
|
| 9 (Manganese) |
500.0 |
|
| 10 (Sulphur) |
500.0 |
|
| 11 (Phosphorus) |
500.0 |
|
| 12 (Powder Coating Thickness) |
2000.0 |
|
|
| 3281 |
National Test House (ER), Kolkata
| Custom-10-ER-LM - SEMI-MOTORIZED ICU BED |
SEMI-MOTORIZED ICU BED |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Yield Point or Proof Stress) |
1000.0 |
|
| 3 (Elongation) |
1000.0 |
|
| 4 (Thickness) |
1000.0 |
|
| 5 (Bend Test) |
1000.0 |
|
| 6 (Hardness Test) |
1000.0 |
|
| 7 (Cupping Test) |
3000.0 |
|
| 8 (Carbon) |
500.0 |
|
| 9 (Manganese) |
500.0 |
|
| 10 (Sulphur) |
500.0 |
|
| 11 (Phosphorus) |
500.0 |
|
| 12 (Powder Coating Thickness) |
2000.0 |
|
|
| 3282 |
National Test House (ER), Kolkata
| Custom-9-ER-LM - MOTORIZED ICU BED |
MOTORIZED ICU BED |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Yield Point or Proof Stress) |
1000.0 |
|
| 2 (Tensile Strength) |
1000.0 |
|
| 3 (Elongation) |
1000.0 |
|
| 4 (Thickness) |
1000.0 |
|
| 5 (Bend Test) |
1000.0 |
|
| 6 (Hardness Test) |
2000.0 |
|
| 7 (Cupping Test) |
3000.0 |
|
| 8 (Carbon) |
500.0 |
|
| 9 (Manganese) |
500.0 |
|
| 10 (Sulphur) |
500.0 |
|
| 11 (Phosphorus) |
500.0 |
|
| 12 (Powder Coating Thickness) |
2000.0 |
|
|
| 3283 |
National Test House (ER), Kolkata
| IS 710 (2010) - Marine Plywood -Specification |
Marine Plywood -Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9.1.6 (Static Bending Strength-IS 1734 (Part 11):1983) |
3000.0 |
|
| 9.1.7 (Wet Bending Strength-IS 710:2010 & IS 1734 (Part 11):1983) |
3000.0 |
|
| 9.1.5 (Mycological Test-Observation, Glue Shear Strength and Adhesion of Plies- IS 1734 (Part 7, 4 & 5):1983) |
2500.0 |
|
| 9.1.4 (Tensile Strength-IS 1734 (Part 9):1983) |
2500.0 |
|
| 9.1.3.1.2 (Water Resistance Test-Adhesion of Plies-IS 710:2010 & IS 1734 (Part 5):1983) |
1000.0 |
|
| 9.1.3.1.1 (Water Resistance Test-Glue Shear Strength-IS 710:2010 & IS 1734 (Part 4):1983) |
2500.0 |
|
| 9.1.2.2 (Glue Adhesion in Dry State-Adhesion of Plies in dry state-IS 1734 (Part 5):1983) |
1000.0 |
|
| 9.1.2.1 (Glue Adhesion in Dry State-Glue Shear Strength-IS 1734 (Part 4):1983) |
2000.0 |
|
| 7 (Workmanship & Finish-IS 710:2010) |
1000.0 |
|
| 6 (Dimensions-IS 710:2010, Annex B) |
1000.0 |
|
| 9.1.1 (Moisture content-IS 1734 (Part 1):1983) |
1000.0 |
|
|
| 3284 |
National Test House (ER), Kolkata
| IS 710 (2010) - Marine plywood - Specification (Second Revision) |
Marine plywood - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 3285 |
National Test House (WR), Mumbai
| BS EN 50214 (2006) - Requirements and Test methods for Flexible Cables PVC or halogen-free insulated and sheathed cables for Lifts |
Requirements and Test methods for Flexible Cables PVC or halogen-free insulated and sheathed cables for Lifts |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Type Test) |
50000.0 |
|
|
| 3286 |
National Test House (NR), Ghaziabad
| IS 428 - Washable Distemper |
Washable Distemper |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Cl.6.5 Sr. No.(i) (Drying time) |
1500.0 |
|
|
| 3287 |
National Test House (ER), Kolkata
| CQA(HV)/QAI/66/001/ELECTROMAGNET (1989) - Quality Assurance Instruction for Electromagnet |
Quality Assurance Instruction for Electromagnet |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 12.5.2 (Insulation Resistance Test) |
6000.0 |
|
| 12.5.5 (Moisture Resistance Test) |
30000.0 |
|
| 12.5.6 (Cold Resistance Test) |
10000.0 |
|
| 12.5.7 (Thermal Stability Test) |
10000.0 |
|
| 12.5.9 (Frost & Dew Resistance Test) |
10000.0 |
|
| 12.5.12 (Vibration Strength Test) |
10000.0 |
|
|
| 3288 |
National Test House (ER), Kolkata
| IS 513 : Part 2 (2016) - Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision) |
Cold reduced carbon steel sheet and strip: Part 2 high tensile and multi - Phase steel (Sixth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 (Yield stress) |
1000.0 |
|
| 7.1 (Tensile strength) |
1000.0 |
|
| 7.1 (% Elongation) |
1000.0 |
|
| 7.2 (Bend Test) |
1000.0 |
|
| 10 (Thickness) |
1000.0 |
|
| 6 (Chemical composition (Carbon)) |
625.0 |
|
| 6 (Chemical composition (Manganese)) |
625.0 |
|
| 6 (Chemical composition (Sulphur)) |
625.0 |
|
| 6 (Chemical composition (Phosphorus)) |
625.0 |
|
|
| 3289 |
National Test House (ER), Kolkata
| Custom Specification ER Starch - Testing method for starch (Customer specification) |
Testing method for starch (Customer specification) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Starch content) |
1500.0 |
|
|
| 3290 |
National Test House (NR), Ghaziabad
| JIS K 5552:2010 (2010) - ZINC RICH PRIMER |
ZINC RICH PRIMER |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Clause 5 Table 1 (Please see Annexure) |
25000.0 |
|
|
| 3291 |
National Test House (ER), Kolkata
| ASM Hand Book Vol 9 (1992) - Metallography and Microstructures |
Metallography and Microstructures |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| ASM Vol. 9 (Microstructure Analysis) |
3000.0 |
|
| ASM Vol. 9 (Grain Size) |
3000.0 |
|
| ASM Vol. 9 (Examination of Macrostructure) |
2000.0 |
|
|
| 3292 |
National Test House (SR), Chennai
| NTH/WI/MC (On the lines of IS:3624-1987) 9 - Calibration of Vacuum Gauges |
Calibration of Vacuum Gauges |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.2 (Vacuum gauge calibration) |
1200.0 |
|
|
| 3293 |
National Test House (SR), Chennai
| NTH/WI/MC (On the lines of DKD-R 6-1:01/2014) 8 - Calibration of Pressure Gauges |
Calibration of Pressure Gauges |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.1 (Industrial pressure gauge calibration) |
1200.0 |
|
|
| 3294 |
National Test House (SR), Chennai
| NTH/WI/MC (by substitutional weighing in Electronic balance with reference to OIML R-111) 7 - Weights of classes E1, E2, F1, F2, M1, M1–2, M2, M2–3 and M3 |
Weights of classes E1, E2, F1, F2, M1, M1–2, M2, M2–3 and M3 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1.1 (Analytical weight calibration) |
4310.0 |
|
|
| 3295 |
National Test House (NR), Ghaziabad
| JIS K 5553 : 2002 (2002) - HIGH BUILD TYPE ZINC RICH PAINT |
HIGH BUILD TYPE ZINC RICH PAINT |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Clause 5 ,Table 1 (Please see Annexure) |
30000.0 |
|
|
| 3296 |
National Test House (NR), Ghaziabad
| JIS K 5551:2008 (2008) - HEAVY DUTY ANTICORROSIVE PAINTS FOR METAL STRUCTURES |
HEAVY DUTY ANTICORROSIVE PAINTS FOR METAL STRUCTURES |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Clause 5 Table 2 (Please see Annexure) |
30000.0 |
|
|
| 3297 |
National Test House (NR), Ghaziabad
| IS 455 (2015) - Portland slag cement - Specification |
Portland slag cement - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 3298 |
National Test House (ER), Kolkata
| Custom-8-ER-LM - Automatic Come Along Clamp |
Automatic Come Along Clamp |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Breaking Load) |
5000.0 |
|
|
| 3299 |
National Test House (NR), Ghaziabad
| Custom-4-NTH-LM - Omega Clamp/Profile Plate |
Omega Clamp/Profile Plate |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Length) |
500.0 |
|
| 2 (Width) |
500.0 |
|
| 3 (Thickness) |
500.0 |
|
| 4 (Weight) |
1000.0 |
|
| 5 (Mass of Zinc Coating) |
2000.0 |
|
| 6 (Uniformity of Coating) |
1000.0 |
|
| 7 (Powder Coating Thickness) |
1000.0 |
|
| 8 (Salt Spray Test for 1440 Hours) |
72000.0 |
|
|
| 3300 |
National Test House (NR), Ghaziabad
| Custom-3-NTH-LM - Concertina coil/PTCC |
Concertina coil/PTCC |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8 (Carbon) |
500.0 |
|
| 8 (Sulphur) |
500.0 |
|
| 8 (Phosphorus) |
500.0 |
|
| 8 (Chromium) |
1000.0 |
|
| 8 (Manganese) |
500.0 |
|
| 8 (Nickel) |
500.0 |
|
| 8 (Silicon) |
500.0 |
|
| 1 (Diameter of wire, mm) |
1000.0 |
|
| 2 (Blade Length) |
1000.0 |
|
| 3 (Center to center distance between blade) |
1000.0 |
|
| 4 (Thickness of Blade) |
1000.0 |
|
| 5 (Tensile Strength of wire) |
3000.0 |
|
| 6 (Yield Stress of wire) |
1000.0 |
|
| 7 (Percentage Elongation of wire) |
1000.0 |
|
| 9 (Mass of Zinc Coating of wire) |
1000.0 |
|
| 10 (Salt Spray Test for 1440 Hours) |
72000.0 |
|
| 0 (Chemical Composition of Razor blade &wire(SS304/316)) |
6000.0 |
|
| 1 (Coil Diameter, mm) |
1000.0 |
|
|