NTH - Management Information System

Search by Standard No.

Reset

4064 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

3241

National Test House (WR), Mumbai

BS:6121-1: 2005 - Armour Cable Glands

Armour Cable Glands

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2.2 , 4.2.1, 4.2.3 (Applicable parameters as per Annexure)	150000.0

3242

National Test House (NWR), Jaipur

IS 5405 (2019) - Sanitary napkins – Specification (second revision)

Sanitary napkins – Specification (second revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.2 (Ability to withstand pressure after abrorption)	1000.0
7.1 (pH Value)	1000.0
6 (Manufacture, workmanship and finish)	1000.0
5 (Dimensions / Sizes)	500.0
4 (Type and Shape of Napkins)	500.0
3 (Material (Cover, absorbant core, bottom sheet))	1000.0
5 (Pad Length (Absorbent core only))	1000.0
5 (Pad width (Absorbent core only))	1000.0
7.3.2 (Test for common skin Pathogen-Staphylococcus Aureus)	2500.0
7.3.1 (Bacterial and fungal Bioburden)	2500.0

3243

National Test House (WR), Mumbai

IS 383 for fine aggregate (2016) - Coarse and fine aggregate for Concrete

Coarse and fine aggregate for Concrete

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Sieve analysis/Particle size distribution ( IS:2386(part -1)1963)	2000.0
2 (Test for Specific Gravity (IS:2386(part -III)1963))	500.0
3 (Test for Water absorption (IS:2386(part -III)1963))	1000.0
4 (Test for Bulk Density-Loose condition ( IS:2386(part -III)1963))	500.0
5 (Test for Bulk Density-Compacted condition ( IS:2386(part -III)1963))	500.0
6 (Test for Silt content- (CPWD Specification))	1000.0
7 (Deleterious Materials)	2000.0
8 (Test for Soundness of Aggregate (IS 2386(Part 5):1963))	2000.0
9 (Test for Alkali aggregate reaction- Chemical method (IS 2386(Part 7):1963))	3000.0
10 (Test for bulking of sand)	1000.0
5.5 (Soundness of Aggregates [IS 2386 (Part 5)], %)	2000.0
Clause 5.7 Table 3 (TOTAL ALKALI CONTENT as Na2O EQUIVALENT)	1000.0
5.7 TABLE 3 (TOTAL SULPHATE CONTENT as SO3)	1000.0
5.7 TABLE 3 (ACID SOLUBLE CHLORIDE CONTENT)	1000.0
5.2 (Organic Impurities)	1000.0
13 (IS 2386 (Part 5)_Soundness (Magnesium Sulphate))	2000.0

3244

National Test House (WR), Mumbai

ASTM D 4541 - Standard Test Method for Pull-Off Strength of coatings using portable adhesion Tester

Standard Test Method for Pull-Off Strength of coatings using portable adhesion Tester

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
ASTM D 4541 (pull-off strength of coatings (Pull of Adhesion, ASTM D 4541))	2000.0

3245

National Test House (SR), Chennai

NTH/WI/MC 6 (2019) - Calibration of Stage micrometer, Microscope standard kit, Microscope scale

Calibration of Stage micrometer, Microscope standard kit, Microscope scale

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Measurement of scale graduation)	1500.0
1.2 (Measurement of scale graduation)	1500.0
1.3 (Measurement of scale graduation)	1500.0

3246

National Test House (NR), Ghaziabad

IS 778 (1984) - Specification for 2010 copper alloy gate, globe and check valves for waterworks purposes (Fourth Revision)

Specification for 2010 copper alloy gate, globe and check valves for waterworks purposes (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1 Table 1 IS: 318 (Chemical Composition (Please see Annexure. NABL))	8000.0
8.1 Table 1 IS: 319 (Chemical Composition (Please see Annexure. NABL))	8000.0
IS:1264 Cl 7.1 Table 1 (Chemical Composition (Please see Annexure. NABL))	9000.0
IS:1264 ;IS: 7.1 Table 1 Chemical Composition (Chemical Composition (Please see Annexure.NON- NABL))	1.0
IS:318 ;3.1 Table 1 Chemical Composition (Chemical Composition (Please see Annexure.NON- NABL))	1.0
8.1 Table 1 IS: 319 Chemical Composition (Chemical Composition (Please see Annexure.) NON NABL)	1.0

3247

National Test House (WR), Mumbai

ASTM D 4541 (2017) - Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (1)	-

3248

National Test House (Satellite Centre), Varanasi

IS 1848 : Part 1 (2018) - Writing and printing papers - Specification: Part 1 account book, azure lead, bond, cream laid and cream wove/printing white/printing coloured/printing offset, printing maplitho, printing white super calendered and typewriting types (Fifth Revision)

Writing and printing papers - Specification: Part 1 account book, azure lead, bond, cream laid and cream wove/printing white/printing coloured/printing offset, printing maplitho, printing white super calendered and typewriting types (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (Substance (Grammage), g/sq.m)	1000.0
4.6(viii) (Smoothness Bendsten)	2000.0
4.6 (vii) (Wax Pick)	2000.0
4.3 (Thickness)	1000.0
4.6 (Folding Endurance)	1500.0
4.6 (One Minute Cobb)	1000.0
4.6 (Opacity, %)	2000.0
4.6 (Brightness, %)	2000.0
4.5 (pH (Hot Extract))	1000.0
4.4 (Sizes and tolerance on size)	1000.0
4.3 (Thickness)	1000.0
4.6 (v) b (Double fold (CD))	750.0
4.6 (v) a (Double Fold (MD))	750.0
4.6 (viii)b (Smoothness Bendsten (Wire Side), ml/min)	1000.0
4.6 (viii)a (Smoothness Bendsten (Top Side), ml/min)	1000.0
4.6(ix) (Tear Index (CD))	1000.0
4.6 (ix) (Tear index(MD))	1000.0
4.6 (i) a (Tensile Index (CD))	1000.0
4.6 (i) (Tensile Index (MD))	1000.0
Firm's Requirement (Surface Sizing)	1000.0
Firm's Requirement (Resistance to Feathering)	1000.0

3249

National Test House (NWR), Jaipur

IS 4970 (1973) - Key for Identification for Commercial Timber

Key for Identification for Commercial Timber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Species Identification)	5000.0

3250

National Test House (WR), Mumbai

IS 7098 : Part 2 (2011) - Crosslinked polyethylene insulated thermoplastic sheathed cables - Specification: Part 2 for working voltages from 3.3 kV up to and including 33 kV (Second Revision)

Crosslinked polyethylene insulated thermoplastic sheathed cables - Specification: Part 2 for working voltages from 3.3 kV up to and including 33 kV (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
19.1 (i) d) (Dimensions)	1000.0
8.1 (Conductor)	100.0
19.2.(j) (High Voltage test at room temperature)	1000.0
13.1 (Insulation)	100.0
19.2.(g) (Tensile strength at break)	1000.0
19.1.(xv) (Flammability Test)	500.0
19.1.(iii) a) (Tensile strength at break)	1000.0
19.2.(d) (Resistance of conductor-R)	1000.0
19.2 (Acceptance Test)	25000.0
19.2.(d) (Resistance of conductor-Y)	1000.0
19.1.(vi)(g) (Thermal stability)	5000.0
19.2.(d) (Resistance of conductor-B)	1000.0
19.2.(d) (Resistance of conductor-Black)	250.0

3251

National Test House (SR), Chennai

101 part 5 sec 2 (1988) - "METHODS OF SAMPLING AND TEST FOR PAINTS, VARNISHES AND RELATED PRODUCTS" SCRATCH HARDNESS TEST UPTO 1000 GM

"METHODS OF SAMPLING AND TEST FOR PAINTS, VARNISHES AND RELATED PRODUCTS" SCRATCH HARDNESS TEST UPTO 1000 GM

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

3252

National Test House (SR), Chennai

IS 101 part 6 sec 1 (1988) - "METHODS OF SAMPLING AND TEST FOR PAINTS, VARNISHES AND RELATED PRODUCTS" SALT SPRAY FOR 96 HRS.

"METHODS OF SAMPLING AND TEST FOR PAINTS, VARNISHES AND RELATED PRODUCTS" SALT SPRAY FOR 96 HRS.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

3253

National Test House (SR), Chennai

Custom specification for paint as per IS 101 (1988) - Methods of Sampling and Test for Paints, Varnishes and related products

Methods of Sampling and Test for Paints, Varnishes and related products

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

3254

National Test House (NR), Ghaziabad

IS 694 (2010) - Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1100 v (Fourth Revision)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1100 v (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Acceptance Tests (Conductor resistance test,Test for thickness of insulation,Tensile strength and elongation at break of insulation,Insulation resistance test,High voltage test ,Flammability test ,Oxygen index test ,Test for temperature index , Test for halogen acid gas evaluation and Test for smoke density rating ))	30000.0
5 (The insulation shall be of polyvinyl chloride compound of a) Type A — Cables for fixed installation b) Type C — Heat-resistant cables (HR) c) Type D — Flexible cables and cords The insulation shall be so applied that it fits closely on the conductor. It shall be possible to remove it without damage to the insulation itself, to the conductor)	-
6 (Filler: Material & Application The fillers shall be composed of one of the following or of any combination of the following: a) A compound based on unvulcanized rubber or plastics; or b) Natural or synthetic textiles; or c) Paper; or d) PVC)	-
7 (Binder tape (Binder tape shall consist of plastic or proof textile material.))	-
8 (Sheath: Material, Colour & application of sheath The sheath shall be polyvinyl chloride compound of the type specified for each type of cable as given below: a) Type ST1 — cables for fixed installations b) Type ST2 — cables sheathed with 85°C HRPVC compound c) Type ST3 — flexible cables)	-
9 (Ovality)	-
12 (Core identification)	-
13 (Cable code)	-
15 (Packing and Marking)	-
Table 1. iii. a. 1 (Annealing test for copper (core 1))	500.0
Table 1. iii. a. 2 (Tensile test for Aluminium(core 1))	500.0
Table 1. iii. a. 3 (Wrapping test for Aluminium)	500.0
Table 1. iii. a. 4 (Conductor resistance test (core 1))	1500.0
Table 1. iii. a. 5 (Persulphate test (for tinned copper conductor only))	1000.0
Table 1. iii. b (Test for overall dimension and thickness of insulation/sheath)	1000.0
Table 1. iii. b(2) (Minimum thickness of insulation (Core 1))	500.0
Table 1. iii. b(3) (Average thickness of sheath)	-
Table 1. iii. b(4) (Minimum thickness of sheath)	-
Table 1. iii. b(5) (Overall dimension)	500.0
Table 1. iii. c.1(1) (Tensile strength for insulation(Core 1))	1000.0
Table 1. iii. c.1(2) (Percentage elongation for insulation (Core 1))	1000.0
Table 1. iii. c.2 (Loss of mass test for insulation (Core 1))	500.0
Table 1. iii. c.3(1) (Tensile strength test after ageing for insulation(Core 1))	500.0
Table 1. iii. c.3(2) (Percentage elongation after ageing for insulation(Core 1))	500.0
Table 1. iii. c.3(3) (Variation of tensile strength after ageing for insulation(Core 1))	-
Table 1. iii. c.3(4) (Variation in percentage elongation after ageing for insulation (Core 1))	-
Table 1. iii. c.4 (Shrinkage test for insulation(Core 1))	500.0
Table 1. iii. c.5 (Heat shock test for insulation(Core 1))	250.0
Table 1. iii. c.6 (Hot deformation test for insulation(Core 1))	250.0
Table 1. iii. c.7 (Thermal stability test for insulation(Core 1))	500.0
Table 1. iii. c.8 (Cold bend test for insulation(Core 1))	1000.0
Table 1. iii. c.9 (Cold impact test for insulation(Core 1))	1000.0
Table 1. iii. c.10(1) (Flammability test for insulation-Unaffected portion from the lower edge the top clamp(Core 1))	500.0
Table 1. iii. c.10(2) (Flammability test for insulation-Period of burning (Core 1))	750.0
Table 1. iii. c.11 (The Oxygen index for insulation(Core 1))	5000.0
Table 1. iii. c.12 (Test temperature index for insulation(Core 1))	5000.0
Table 1. iii. c.13 (Test for halogen acid gas evaluation for insulation (Core 1))	5000.0
Table 1. iii. c.14 (Smoke density test for insulation (Core 1))	5000.0
Table 1. iii. d.1(1) (Tensile strength for sheath)	-
Table 1. iii. d.1(2) (Elongation test for sheath)	-
Table 1. iii. d.2 (Loss of mass test for sheath)	-
Table 1. iii. d.3(1) (Tensile strength after ageing for sheath)	-
Table 1. iii. d.3(2) (Percentage Elongation after ageing for sheath)	-
Table 1. iii. d.3(3) (Variation in tensile strength after ageing for sheath)	-
Table 1. iii. d.3(4) (Variation in percentage elongation after ageing for sheath)	-
Table 1. iii. d.4 (Shrinkage test for sheath)	-
Table 1. iii. d.5 (Heat shock test for sheath)	-
Table 1. iii. d.6 (Hot deformation test for sheath)	-
Table 1. iii. d.7 (Thermal stability for sheath)	-
Table 1. iii. d.8 (Oxygen index for sheath)	5000.0
Table 1. iii. d.9 (Test for temperature index for sheath)	5000.0
Table 1. iii. d.10 (Test for halogen acid gas evaluation for sheath)	5000.0
Table 1. iii. d.11 (Smoke density rating for sheath)	5000.0
Table 1. iii. d.12 (Cold bend test for sheath)	-
Table 1. iii. d.13 (Cold impact test(for sheath))	-
Table 1. iii. e.1(1) (High voltage test (water immersion test))	3000.0
Table 1. iii. e.1(2) (High voltage test DC (Core 1))	1000.0
Table 1. iii. e.3 , ii.g (Insulation resistance test)	2000.0
Table 1. iii. e.3 , ii.g (Insulation resistance test)	2000.0
Table 1. iii. e.3 , ii.g (Insulation resistance test)	2000.0
Table 1. iii. e.3 , ii.g (Insulation resistance test)	2000.0
Table 1. iii. e.4 (High voltage test (Cl. 10.2)(at room temperature))	1500.0
Table 1. iii. e.4(1) (Flammability Test on complete cable -Period of burning)	500.0
Table 1. iii. e.4(2) (Flammability test on complete cable-Unaffected portion)	750.0
Table 1. iii. e.5 (Additional Ageing Test (for Cables for Outdoor Use))	3000.0
Table 1. iii. e.5(1) (High Voltage Test after additional ageing)	-
Table 1. iii. e.5(2) (Cold bend or cold impact test after additional ageing)	-
Table 1. iii. (Type tests)	40000.0
Table-1,Sl.No(ii) (Core identification,Cable code,Packing and Marking,Conductor resistance test,Test for thickness of insulation,High voltage test AC (water immersion test) and Insulation resistance test.)	7500.0
-- (ILC Tests)	-
Sl.No.(ii),(g) (Insulation Resistance Test)	6000.0
SlNo(ii)(g) (Insulation Resistance Test-Single Core)	2000.0
-- (Insulation Resistance and Flammability)	2500.0
Tests (Conductor Resistance and Insulation Resistance Test)	3500.0
Tests (Tests)	20000.0
Insulation Resistance Test & Tensile strength and elongation at break (Insulation Resistance Test and Tensile strength and elongation at break)	3500.0
Test (Insulation Resistance and High Voltage Test)	5000.0
DAMB Tests (Tests)	29000.0
Test (Insulation Resistance Test)	8000.0
--- (Insulation Resistance and Flammability Tests)	6500.0
Tests (Conductor resistance test, Test for overall dimension and thickness of insulation/sheath, Test for halogen acid gas evaluation for insulation, Smoke density test for insulation, Insulation Resistance and High Voltage Test.)	17500.0
Additional Core(3core) (---)	6000.0
Type Tests,Category-01. (Tests)	20998.0

3255

National Test House (ER), Kolkata

IS 5287 (2005 RA2020) - ALCOHOLIC DRINKS — COUNTRY SPIRIT (DISTILLED)

ALCOHOLIC DRINKS — COUNTRY SPIRIT (DISTILLED)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (Ethyl Alcohol Content % by volume)	2000.0
7.2 (Freedom from Sedimentation and Harmful Ingredients)	100.0
7.3 (Freedom from Added Colouring Matter)	500.0
7.4 (Taste and Aroma)	500.0
7.5 Table 1 (i) (Residue on evaporation)	300.0
7.5 Table 1 (ii) (Total acids as tartaric acid)	500.0
7.5 Table 1 (iii) (Volatile acids as acetic acid)	500.0
FSSAI (Arsenic)	500.0
7.5 Table 1 (iv) (Esters as ethyl acetate)	1000.0
7.5 Table 1 (v) (Higher alcohols as amyl alcohol)	500.0
7.5 Table 1 (vi) (Aldehydes as acetaldehyde)	500.0
7.5 Table 1 (vii) (Furfural)	500.0
7.5 Table 1 (viii) (Copper (as Cu))	500.0
7.5 Table 1 (ix) (Methyl alcohol)	600.0
FSSAI (Lead)	500.0
FSSAI (Mercury)	500.0
FSSAI (Cadmium)	500.0
7.1 (Ethyl Alcohol Content % by volume)	2000.0
7.5 Table 1 (i) (Residue on evaporation)	300.0
7.5 Table 1 (ix) (Methyl alcohol)	600.0
7.5 Table 1 (vi) (Aldehydes as acetaldehyde)	500.0
7.5 Table 1 (iv) (Esters as ethyl acetate)	1000.0
7.5 Table 1 (ii) (Total acids as tartaric acid)	500.0
7.5 Table 1 (iii) (Volatile acids as acetic acid)	500.0
7.5 Table 1 (vii) (Furfural)	500.0
7.3 (Freedom from Added Colouring Matter)	500.0
7.4 (Taste and Aroma)	500.0
7.5 Table 1 (viii) (Copper (as Cu))	500.0
7.5 Table 1 (v) (Higher alcohols as amyl alcohol)	500.0

3256

National Test House (WR), Mumbai

Polymer Identification by FTIR Method - Fourier-transform infrared spectroscopy (FTIR) instrumental technique for identification

Fourier-transform infrared spectroscopy (FTIR) instrumental technique for identification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
FTIR Method (Polymer Identification by FTIR Method / Library)	2000.0

3257

National Test House (WR), Mumbai

Custom specification for paint as per IS 101 (1988) - Methods of Sampling and Test for Paints, Varnishes and related products

Methods of Sampling and Test for Paints, Varnishes and related products

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
(Part 4/Sec 3):1988 (Optical Tests: Light Fastness Test for 100 hrs)	5000.0
Thickness (Coating Thickness)	1200.0
Water absorption (Water absorption)	1.0
Water Repellency test (Water Repellency test)	1.0

3258

National Test House (WR), Mumbai

IS 1148 (2009) - Steel Rivet Bars (medium And High Tensile)--For Structural Purposes--For Structural Purposes

Steel Rivet Bars (medium And High Tensile)--For Structural Purposes--For Structural Purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11 (Yield Stress ( Medium) - 6mm up to and including 12mm)	1000.0
11 (Yield Stress (Medium)- Over 12mm up to and including 20mm)	1000.0
11 (Yield Stress (Medium)- Over 20 mm up to and including 40mm)	1000.0
11 (Tensile Strength (Medium))	1000.0
11 (Elongation ( Medium Tensile Steel))	1000.0
11 (Tensile Strength (High))	1000.0
11 (Yield Stress ( High) - 6mm up to and including 12mm)	1000.0
11 (Yield Stress( High) - Over 12mm up to and including 20mm)	1000.0
11 (Yield Stress (High) - Over 20mm up to and including 40mm)	1000.0
11 (Elongation (High tensile steel))	1000.0
12 (Bend Test)	2000.0
8 (Dimension)	500.0
9 (Diameter of Bar ( below 20mm ))	500.0
7 (Visual Observation)	1000.0
6 (Carbon)	500.0
6 (Sulphur)	500.0
6 (Phosphorus)	500.0

3259

National Test House (NWR), Jaipur

IS 4984 (1995) - high density polyethylene pipes for potable water supplies

high density polyethylene pipes for potable water supplies

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

3260

National Test House (NWR), Jaipur

IS 9845 (1998) - Determination of overall migration of constituents of plastics materials and articles intended to come in contact with foodstuffs - Method of analysis (Second Revision)

Determination of overall migration of constituents of plastics materials and articles intended to come in contact with foodstuffs - Method of analysis (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

3261

National Test House (SR), Chennai

IS 694 (2010) - Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1100 v (Fourth Revision)

Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1100 v (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Acceptance Tests (Conductor resistance test,Test for thickness of insulation,Tensile strength and elongation at break of insulation,Insulation resistance test,High voltage test ,Flammability test ,Oxygen index test ,Test for temperature index , Test for halogen acid gas evaluation and Test for smoke density rating ))	30000.0
5 (The insulation shall be of polyvinyl chloride compound of a) Type A — Cables for fixed installation b) Type C — Heat-resistant cables (HR) c) Type D — Flexible cables and cords The insulation shall be so applied that it fits closely on the conductor. It shall be possible to remove it without damage to the insulation itself, to the conductor)	-
6 (Filler: Material & Application The fillers shall be composed of one of the following or of any combination of the following: a) A compound based on unvulcanized rubber or plastics; or b) Natural or synthetic textiles; or c) Paper; or d) PVC)	-
7 (Binder tape (Binder tape shall consist of plastic or proof textile material.))	-
8 (Sheath: Material, Colour & application of sheath The sheath shall be polyvinyl chloride compound of the type specified for each type of cable as given below: a) Type ST1 — cables for fixed installations b) Type ST2 — cables sheathed with 85°C HRPVC compound c) Type ST3 — flexible cables)	-
9 (Ovality)	-
12 (Core identification)	-
13 (Cable code)	-
15 (Packing and Marking)	-
Table 1. iii. a. 1 (Annealing test for copper (core 1))	500.0
Table 1. iii. a. 2 (Tensile test for Aluminium(core 1))	500.0
Table 1. iii. a. 3 (Wrapping test for Aluminium)	500.0
Table 1. iii. a. 4 (Conductor resistance test (core 1))	1500.0
Table 1. iii. a. 5 (Persulphate test (for tinned copper conductor only))	1000.0
Table 1. iii. b (Test for overall dimension and thickness of insulation/sheath)	1000.0
Table 1. iii. b(2) (Minimum thickness of insulation (Core 1))	500.0
Table 1. iii. b(3) (Average thickness of sheath)	-
Table 1. iii. b(4) (Minimum thickness of sheath)	-
Table 1. iii. b(5) (Overall dimension)	500.0
Table 1. iii. c.1(1) (Tensile strength for insulation(Core 1))	1000.0
Table 1. iii. c.1(2) (Percentage elongation for insulation (Core 1))	1000.0
Table 1. iii. c.2 (Loss of mass test for insulation (Core 1))	500.0
Table 1. iii. c.3(1) (Tensile strength test after ageing for insulation(Core 1))	500.0
Table 1. iii. c.3(2) (Percentage elongation after ageing for insulation(Core 1))	500.0
Table 1. iii. c.3(3) (Variation of tensile strength after ageing for insulation(Core 1))	-
Table 1. iii. c.3(4) (Variation in percentage elongation after ageing for insulation (Core 1))	-
Table 1. iii. c.4 (Shrinkage test for insulation(Core 1))	500.0
Table 1. iii. c.5 (Heat shock test for insulation(Core 1))	250.0
Table 1. iii. c.6 (Hot deformation test for insulation(Core 1))	250.0
Table 1. iii. c.7 (Thermal stability test for insulation(Core 1))	500.0
Table 1. iii. c.8 (Cold bend test for insulation(Core 1))	1000.0
Table 1. iii. c.9 (Cold impact test for insulation(Core 1))	1000.0
Table 1. iii. c.10(2) (Flammability test for insulation-Period of burning (Core 1))	750.0
Table 1. iii. c.10(1) (Flammability test for insulation-Unaffected portion from the lower edge the top clamp(Core 1))	500.0
Table 1. iii. c.11 (The Oxygen index for insulation(Core 1))	5000.0
Table 1. iii. c.12 (Test temperature index for insulation(Core 1))	5000.0
Table 1. iii. c.13 (Test for halogen acid gas evaluation for insulation (Core 1))	5000.0
Table 1. iii. c.14 (Smoke density test for insulation (Core 1))	5000.0
Table 1. iii. d.1(1) (Tensile strength for sheath)	-
Table 1. iii. d.1(2) (Elongation test for sheath)	-
Table 1. iii. d.2 (Loss of mass test for sheath)	-
Table 1. iii. d.3(1) (Tensile strength after ageing for sheath)	-
Table 1. iii. d.3(2) (Percentage Elongation after ageing for sheath)	-
Table 1. iii. d.3(3) (Variation in tensile strength after ageing for sheath)	-
Table 1. iii. d.3(4) (Variation in percentage elongation after ageing for sheath)	-
Table 1. iii. d.4 (Shrinkage test for sheath)	-
Table 1. iii. d.5 (Heat shock test for sheath)	-
Table 1. iii. d.6 (Hot deformation test for sheath)	-
Table 1. iii. d.7 (Thermal stability for sheath)	-
Table 1. iii. d.8 (Oxygen index for sheath)	5000.0
Table 1. iii. d.9 (Test for temperature index for sheath)	5000.0
Table 1. iii. d.10 (Test for halogen acid gas evaluation for sheath)	5000.0
Table 1. iii. d.11 (Smoke density rating for sheath)	5000.0
Table 1. iii. d.12 (Cold bend test for sheath)	-
Table 1. iii. d.13 (Cold impact test(for sheath))	-
Table 1. iii. e.1(1) (High voltage test (water immersion test))	3000.0
Table 1. iii. e.1(2) (High voltage test DC (Core 1))	1000.0
Table 1. iii. e.3 , ii.g (Insulation resistance test)	2000.0
Table 1. iii. e.3 , ii.g (Insulation resistance test)	2000.0
Table 1. iii. e.3 , ii.g (Insulation resistance test)	2000.0
Table 1. iii. e.3 , ii.g (Insulation resistance test)	2000.0
Table 1. iii. e.4 (High voltage test (Cl. 10.2)(at room temperature))	1500.0
Table 1. iii. e.4(1) (Flammability Test on complete cable -Period of burning)	500.0
Table 1. iii. e.4(2) (Flammability test on complete cable-Unaffected portion)	750.0
Table 1. iii. e.5 (Additional Ageing Test (for Cables for Outdoor Use))	3000.0
Table 1. iii. e.5(1) (High Voltage Test after additional ageing)	-
Table 1. iii. e.5(2) (Cold bend or cold impact test after additional ageing)	-
Table 1. iii. (Type tests)	40000.0
Table 1 (Test on two core cable/single core sheathed cable)	2000.0
Table 1 (Test on three core cable)	4000.0
Table 1 (Test on four core cable)	6000.0
Table 1 (Test on five core cable)	8000.0
Table 1 (Test on six core cable)	10000.0
table 1 (Test on seven core cable)	12000.0
Table 4 of IS 191 (Purity test (for Cu))	3500.0

3262

National Test House (SR), Chennai

Custom Paper Test (2022) - Method of Test for Paper on the lines of IS 1060

Method of Test for Paper on the lines of IS 1060

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.1 (Substances)	1000.0

3263

National Test House (SR), Chennai

IS 3087 (2005) - Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes -Specification

Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes -Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.5 & 11.7Table 1, Sl No.(v) , (Swelling due to surface absorption-IS 2380 (Part 17):1977)	2000.0
9.4 & 11.6, Table 1, Sl No.(iii) & (iv) (Swelling in water-IS 2380 (Part 17):1977)	1500.0
9.3 & 11.5, Table 1, Sl No.(ii) (Water Absorption-IS 2380 (Part 16):1977)	1000.0
9.2 & 11.4 (Moisture content-IS 2380 (Part 3):1977)	1000.0
9.1 & 11.3, Table 1, Sl No.(i) (Density-IS 2380 (Part 3):1977)	500.0
8 and 11.2 (Dimensions and Tolerances-IS 2380 (Part 2):1977)	500.0
custom (Compression strength)	1500.0
custom (Compression strength)	1500.0
custom (Lead content)	1200.0
custom (Shore D)	1000.0
11.9.1, Table 1, Sl No.(ix), a & b (Tensile strength perpendicular to surface after cyclic/accelerated water resistance test-IS 2380 (Part 5):1977)	2000.0
11.10, Table 1, Sl No.(x) (Screw Withdrawal Strength-IS 2380 (Part 14):1977)	1500.0
11.9, Table 1, Sl No.(viii) (Tensile strength perpendicular to surface-IS 2380 (Part 5):1977)	2000.0
11.8, Table 1, Sl No.(vi) & (vii) (Modulus of Rupture and Modulus of Elasticity-IS 2380 (Part 4):1977)	2500.0
9.6 (Workability-IS 3087:2005)	2000.0

3264

National Test House (NWR), Jaipur

IEC 62271-102:2018 (2018) - High-voltage switch gear and control gear - Part 102: Alternating current disconnectors and earthing switches.

High-voltage switch gear and control gear - Part 102: Alternating current disconnectors and earthing switches.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.106 (Mechanical Endurance Test M0 Class on DBCR Isolator (1000 Operation))	20000.0
7.5 (Temperature Rise Test as per IEC62271-102:2018)	20000.0

3265

National Test House (ER), Kolkata

IS 9537 : Part 1 (1980) - Specification for conduits for electrical installations: Part 1 general requirements

Specification for conduits for electrical installations: Part 1 general requirements

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (Compression Test (Compression Force: 1250 N))	3000.0
9 (Compression Test (Compression Force: 4000 N))	3000.0
9 (Compression Test (Compression Force: 750 N))	3000.0
7 (Outside Diameter (Cl 7.1 of IS 9537 (Part-II): 1981)	500.0
7 (Wall Thickness (Cl. 7.1 of IS 9537(Part II):1981)	500.0
7 (Checking the Minimum Outside diameter (Cl 7.2.1 of IS 9537(Part II): 1981)	250.0
7 (Checking the Maximum Outside diameter (Cl 7.2.2 of IS 9537(Part II): 1981)	250.0

3266

National Test House (ER), Kolkata

NTH ER Customer specification 2 -High Polymer

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.0 (Resistance to colour change in Xenon arc light (Blue wool Std No 8))	8000.0
7.1 (Resistance to colour change in Xenon arc light)	5000.0

3267

National Test House (ER), Kolkata

IS 383:2016 (for Coarse aggregates) (2016) - Coarse and fine aggregate for Concrete for concrete-Specification

Coarse and fine aggregate for Concrete for concrete-Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Test for Size and Grading of Aggregate (IS:2386(part -1)1963))	2000.0
2 (Test for Specific Gravity ( IS:2386(part -III)1963))	500.0
3 (Test for Water absorption ( IS:2386(part -III)1963))	1000.0
4 (Test for Aggregate Impact Value(IS 2386(Part 4):1963))	1500.0
5 (Test for Aggregate Crushing Value(IS 2386(Part 4):1963))	1500.0
6 (Test for Aggregate Abrasion Value(IS 2386(Part 4):1963))	1500.0
7 (Test for Bulk Density-Loose condition (IS:2386(part-III)-1963))	500.0
8 (Test for Bulk Density-Compacted condition ( IS:2386(part-III)-1963))	500.0
9 (Test for Ten percent fine value(IS 2386(Part 4):1963))	1500.0
10 (Test for Combined Flakiness and Elongation Index ( IS:2386(part -I)1963))	3000.0
11 (Test for Surface moisture(IS 2386(3):1963))	1000.0
12 (Test for Deleterious Materials(IS 2386(Part 2):1963))	2000.0
13 (Test for Soundness of Aggregate(IS 2386(5):1963))	2000.0
14 (Test for Alkali aggregate reaction-(IS 2386(7):1963):Chemical method)	3000.0
13 (Test for Soundness of Aggregate(IS 2386(5):1963))	2000.0

3268

National Test House (ER), Kolkata

PGCIL SFQP No.: Doc No. C/FQA/SFQP/SCW REV.06 dated:03.08.2020 (2020) - Specification ( Test on Stone Gravel) Power Grid Corporation of India Ltd.

Specification ( Test on Stone Gravel) Power Grid Corporation of India Ltd.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.6 (Measurement of Resistivity of Gravel)	20000.0

3269

National Test House (ER), Kolkata

IS 383 for fine aggregate (2016) - Coarse and fine aggregate for Concrete

Coarse and fine aggregate for Concrete

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Sieve analysis/Particle size distribution ( IS:2386(part -1)1963)	2000.0
2 (Test for Specific Gravity (IS:2386(part -III)1963))	500.0
3 (Test for Water absorption (IS:2386(part -III)1963))	1000.0
4 (Test for Bulk Density-Loose condition ( IS:2386(part -III)1963))	500.0
5 (Test for Bulk Density-Compacted condition ( IS:2386(part -III)1963))	500.0
6 (Test for Silt content- (CPWD Specification))	1000.0
7 (Deleterious Materials)	2000.0
8 (Test for Soundness of Aggregate (IS 2386(Part 5):1963))	2000.0
9 (Test for Alkali aggregate reaction- Chemical method (IS 2386(Part 7):1963))	3000.0
10 (Test for bulking of sand)	1000.0

3270

National Test House (SR), Chennai

School Bag-CUST-TNTB&ESC (2021) - TS for School Bag

TS for School Bag

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Part1 1.1 (Colour of the Bag)	85.0
Part1 1.2 (Colour of the Front Pocket)	85.0
Part1 1.3 (Colour of Shoulder Strip)	85.0
Part1 1.4 (Colour of Adjustable Belt)	85.0
Part1 1.5 (Colour of Beeding)	85.0
Part1 1.6 (colour of shoulder adjustable buckle)	85.0
Part1 1.7 (Colour of Water bottle pocket)	85.0
Part1 1.8 (Colour of Zip & Runner)	85.0
Part1 1.9 (Colour of ID Card pocket)	80.0
Part1 1.10 (Colour of Top handle)	80.0
Part1 1.11 (Colour of Belt Buckle)	80.0
Part1 1.12 (Colour of Inner Compartment)	80.0
Part2 2.1.1 (School Bag Length)	70.0
Part2 2.1.2 (School Bag Breadth)	35.0
Part2 2.1.3 (School Bag Total Depth, Border side)	35.0
Part2 2.1.4 (School Bag First Compartment Depth)	35.0
Part2 2.1.5 (School Bag Second Compartment Depth)	35.0
Part2 2.1.6 (Thickness of School bag material)	35.0
Part2 2.1.7 (Thickness of School bag Compartment Material)	35.0
Part2 2.1.8 (Weight of School bag)	35.0
Part2 2.2.1 (Front pocket Length Top-to-Bottom)	35.0
Part2 2.2.2 (Front pocket Breadth Right-to-Left)	35.0
Part2 2.2.3 (Front pocket Depth)	70.0
Part2 2.3 (SHOULDER STRIP-Edges stitched lengthwise along with foam)	35.0
Part2 2.3.1 (Shoulder Strip Length)	35.0
Part2 2.3.2 (Shoulder Strip Breadth)	35.0
Part2 2.3.3 (Shoulder Strip Thickness including foam)	35.0
Part2 2.3.4 (Shoulder Strip Hooke, free Length)	35.0
Part2 2.4.1 (Water Bottle Pocket Length)	70.0
Part2 2.4.2 (Water Bottle Pocket Depth at bottom)	35.0
Part2 2.4.3 (Water Bottle Pocket Diameter of Elastic on Stretching)	70.0
Part2 2.5.1.1 (First Compartment Zip Length)	30.0
Part2 2.5.1.2 (Zip Size of First Compartment)	30.0
Part2 2.5.1.3 (Second Compartment Zip Length)	30.0
Part2 2.5.1.4 (Zip Size of Second Compartment)	30.0
Part2 2.5.2.1 (Front Pocket Zip Length)	30.0
Part2 2.5.2.2 (Front Pocket Zip size)	30.0
Part2 2.5.3.1 (Runner Handle Length)	30.0
Part2 2.5.3.2 (Runner Handle Width)	30.0
Part2 2.5.3.3 (Runner Handle Thickness)	30.0
Part2 2.5.3.4 (Weight of runner handle with head)	30.0
Part2 2.6.1 (ID card Pocket Length)	30.0
Part2 2.6.2 (ID card Pocket Width)	30.0
Part2 2.7.1 (Stitched Edges Pipe Beeding Diameter)	30.0
Part2 2.8.1 (Top Handle Length)	30.0
Part2 2.8.2 (Top Handle Breadth/Diameter)	30.0
Part2 2.9 (Adjustable Belt free ends)	30.0
Part2 2.9.1 (Adjustable Belt Length)	23.0
Part2 2.9.2 (Adjustable Belt Breadth)	23.0
Part2 2.9.3 (Adjustable Belt Thickness)	23.0
Part2 2.9.4 (Adjustable Belt Weight per meter)	23.0
Part2 2.10 (Shoulder Adjustable Belt Buckle)	23.0
Part3 3.1.1 (Bag Outer Layer material)	210.0
Part3 3.1.2 (Bag Inner Layer material)	210.0
Part3 3.2.1 (Compartment Outer Layer material)	210.0
Part3 3.2.2 (Compartment Inner Layer material)	210.0
Part3 3.3.1 (Front Pocket Outer Layer material)	210.0
Part3 3.3.2 (Front Pocket Inner Layer material)	210.0
Part3 3.4.1 (Shoulder Strip Outer Layer material)	210.0
Part3 3.4.2 (Shoulder Strip Inner Layer material)	210.0
Part3 3.4.3 (Shoulder Strip Cushion Foam material)	210.0
Part3 3.5.1 (Water Bottle Pocket Outer Layer)	210.0
Part3 3.5.2 (Water Bottle Pocket Inner Layer material)	210.0
Part3 3.5.3 (Water Bottle Pocket Net material)	210.0
Part3 3.6 (Zip material material)	210.0
Part3 3.7 (Runner material material)	210.0
Part3 3.8 (ID Card material material)	210.0
Part3 3.9 (Stitched Edges Pipe Beeding material material)	210.0
Part3 3.10 (Top handle material)	210.0
Part3 3.11 (Adjustable Belt material)	215.0
Part3 3.12 (Shoulder adjustable belt buckle material)	215.0
Part4 4.1.1 (Bag Outer Material Breaking Strength Warp)	425.0
Part4 4.1.1.1 (Bag Outer Material Breaking Strength Weft)	425.0
Part4 4.1.2 (Bag Outer Material Tearing Strength Warp)	425.0
Part4 4.1.2.1 (Bag Outer Material Tearing Strength Weft)	425.0
Part4 4.1.3 (Bag Outer Material GSM)	425.0
Part4 4.1.4 (Bag Outer Material Colour Fastness to Water)	425.0
Part4 4.2.1 (Bag Inner Material Breaking Strength Warp)	425.0
Part4 4.2.1.1 (Bag Inner Material Breaking Strength Weft)	425.0
Part4 4.2.2 (Bag Inner Material Tearing Strength Warp)	425.0
Part4 4.2.2.1 (Bag Inner Material Tearing Strength Weft)	425.0
Part4 4.2.3 (Bag Inner Material GSM)	425.0
Part4 4.2.4 (Bag Inner Material Colour Fastness to Water)	425.0
Part4 4.3.1 (Lateral Strength of Slide Fastener(Zip))	500.0
Part4 4.3.2 (Resistance of Slide Fastener To Repeated Opening and Closing(Zip))	1000.0
Part4 4.3.3 (Strength of Slide Fastener Puller(Zip))	500.0
Part4 4.4.1 (Minimum Static Load Bearing Capacity for 1 hour 10kg or15kg or 20kg)	270.0
Part4 4.4.2 (Shoulder Strap Joint pulling Strength(Top back Strap))	270.0
Part4 4.4.3 (Attachment Strength of Adjustable Belt and Buckle)	270.0
Part4 4.4.4 (Top Handle Attachment Strength)	270.0
Part4 4.4.5.1 (Right side Seam Strength)	270.0
Part4 4.4.5.2 (Left side Seam Strength)	270.0
Part4 4.4.5.3 (Bottom side Seam Strength)	270.0
Part4 4.4.5.4 (Pocket Seam Strength)	270.0
Part4 Note1 (Stitch Length)	270.0
Part4 Note2 (Top handle Joint Stitch)	270.0
Part4 Note3 (Shoulder Strip Joint Stitch)	260.0
Part4 Note4 (Provision of second compartment)	260.0
Part4 Note5 (Adjustable strip bottom stitch)	260.0
Part4 Note6 (Number of runners on each compartment)	260.0
Part4 Note7 (Shoulder Strap Attachment)	260.0
Part4 4.1.5 (Bag Outer Material Colour Fastness to minimum Dry 10 rubbings)	425.0
Part4 4.1.5.1 (Bag Outer Material Colour Fastness to minimum Wet 10 rubbings)	425.0
Part4 4.2.5 (Bag Inner Material Colour Fastness to minimum Dry 10 rubbings)	425.0
Part4 4.2.6 (Bag Inner Material Colour Fastness to minimum Wet 10 rubbings)	425.0
1 to 4, Note (Test Results)	19200.0