NTH - Management Information System

National Test House (SR), Chennai

CSIR Road, Tharamani, Chennai - 600113, Chennai, Chennai, Tamil Nadu, 600113

9444380435 directornthsr@nth.gov.in

Scope List

Reset

485 Results

S.No.

Standard No.

Product

Testing Charges (Excl. Of Taxes)

IS 205 (1992) - Non Ferrous Metal Butt Hinges

Non Ferrous Metal Butt Hinges

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Dimensions)	2000.0
6.3 (Dimension measurement & Visual Observation)	2000.0
7.2 (Anodizing)	2000.0

IS 1708(Parts 1-18)1986: RA 2020 - METHODS OF TESTING OF SMALL CLEAR SPECIMENS OF TIMBER

METHODS OF TESTING OF SMALL CLEAR SPECIMENS OF TIMBER

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Moisture content (IS 1708(1):1986))	1000.0
2 (Specific gravity (IS 1708(2):1986))	500.0
3 (Volumetric Shrinkage (IS 1708(3)1986))	1000.0
5 (Static bending strength (IS 1708(5):1986) 1.Fibre stress at limit of proportionality(FS at LP) 2.Equivalent fibre stress at maximum load(MOR) 3.Modulus of Elasticity( M of E) 4.Horizontal shear(HS)stress on neutral plan at LP 5.Horizontal shear stress at maximum load(ML) 6.Wk to LP 7.Wk to ML)	3000.0
15 (Nail and Screw holding power(IS 1708(15):1986))	3000.0
8 (Compressive strength-Parallel to grain(IS 1708(8)1986))	1500.0
9 (Compressive strength-Perpendicular to grain(IS 1708(9):1986))	1500.0
12 (Tensile strength -Parallel to grain(IS 1708(12):1986))	2000.0

CUS/SR/MECH-49 (2024) - FRP Coated SS Plate

FRP Coated SS Plate

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Peel off test)	2500.0
2.0 (Shrinkage test)	2500.0

TI/SPC/OHE/CW/0971 - Hard drawn grooved copper(HDGC) contact Wire for Electrical Traction (Drawn out of continuous Cast copper wire Rod) .

Hard drawn grooved copper(HDGC) contact Wire for Electrical Traction (Drawn out of continuous Cast copper wire Rod) .

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.1.1 (Visual Examination)	1000.0
9.1.2 (Dimension)	2000.0
9.1.3 (Weight)	1500.0
9.1.4 (Resistance/km at 20 Deg. C)	3000.0
9.1.5 (Brinell Hardness)	2000.0
9.1.6 (Tensile Strength)	2000.0
9.1.7 (Elongation at Gauge Length 200 mm)	1000.0
9.1.8 (Bending Test)	1000.0
9.1.9 ((Cu+Ag))	2000.0
9.1.10 (Micro structure Examination)	3000.0

RDSO/TI/SPC/OHE/CAT(Cd-Cu)/0971 - Technical specification for Cadmium Copper for Overhead Electrical Traction-Cu-Cd

Technical specification for Cadmium Copper for Overhead Electrical Traction-Cu-Cd

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1.1 (Chemical composition, percent by mass (Cu+Ag))	5000.0
8.2.1 (Visual examination)	1000.0
8.2.3 (Measurement of diameter of individual wires and stranded conductors, mm)	2000.0
8.2.4 (Measurement of weight of wire and conductor, kg/km)	1000.0
8.2.5 (Measurement of Lay length and lay ratio of each layer of stranded conductor)	3000.0
8.2.6 (Measurement of Electrical resistance of wire and stranded conductor)	5000.0
8.2.7 (Tensile test on wires -3 wires)	3000.0
8.2.7 (Tensile test on wires -7 wires)	3500.0
8.2.7 (Tensile test on wires -19 wires)	9500.0
8.2.7 (Tensile test on wires -37 wires)	18500.0
8.2.8 (Wrapping test on wires)	1000.0

IEC 62271-102:2018 (2018) - High-voltage switch gear and control gear - Part 102: Alternating current disconnectors and earthing switches.

High-voltage switch gear and control gear - Part 102: Alternating current disconnectors and earthing switches.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.106 (Mechanical Endurance Test M0 Class on DBCR Isolator (1000 Operation))	20000.0
7.5 (Temperature Rise Test as per IEC62271-102:2018)	20000.0
Cl.no 7.2.7.3 of IS/IEC 62271-102 (Lightning Impulse Voltage Dry Test)	50000.0
Cl.no 7.2.7.2 of IS/IEC 62271-102 (Power Frequency Voltage Dry Test)	2500.0
Cl.no 7.2.7.2 of IS/IEC 62271-102 (Power Frequency Voltage Wet Test)	2500.0

CUS/SR/MECH-48 - Bi-Cycle - Girls

Bi-Cycle - Girls

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Dimensions and visual examination)	12000.0
2.0 (Chemical composition, % by mass)	5000.0

CUS/SR/MECH-47 - Bi-Cycle - Boys

Bi-Cycle - Boys

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Dimensions and visual examination)	12000.0
2.0 (Chemical composition, % by mass)	5000.0

IS 2386 (Part I) (1963) - Method of Test for Aggregates for Concrete Part I Particle Size and Shape

Method of Test for Aggregates for Concrete Part I Particle Size and Shape

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.4.1 (Dimension calibration of thickness gauge)	4000.0
5.4.1 (Dimension calibration of length gauge)	4000.0
1 ()	-

100

IS 2386 : Part 1 (1963) - Methods of Test for Aggregates for Concrete - Part I : Particle Size and Shape

Methods of Test for Aggregates for Concrete - Part I : Particle Size and Shape

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 ()	-

101

IEC 60840 - Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um= 36 kV) up to 150 kV (Um = 170 kV)

Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um= 36 kV) up to 150 kV (Um = 170 kV)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Acceptance tests as per IEC 60840)	37500.0

102

IS 383 for coarse aggregate (2016) - Coarse and fine aggregate for concrete

Coarse and fine aggregate for concrete

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Test for Size and Grading of Aggregate (IS:2386(part -1)1963))	2000.0
2 (Test for Specific Gravity ( IS:2386(part -III)1963))	500.0
3 (Test for Water absorption ( IS:2386(part -III)1963))	1000.0
4 (Test for Aggregate Impact Value(IS 2386(Part 4):1963))	1500.0
5 (Test for Aggregate Crushing Value(IS 2386(Part 4):1963))	1500.0
6 (Test for Aggregate Abrasion Value(IS 2386(Part 4):1963))	1500.0
7 (Test for Bulk Density-Loose condition (IS:2386(part-III)-1963))	500.0
8 (Test for Bulk Density-Compacted condition ( IS:2386(part-III)-1963))	500.0
9 (Test for Ten percent fine value(IS 2386(Part 4):1963))	1500.0
10 (Test for Combined Flakiness and Elongation Index ( IS:2386(part -I)1963))	3000.0
11 (Test for Surface moisture(IS 2386(3):1963))	1000.0
12 (Test for Deleterious Materials(IS 2386(Part 2):1963))	2000.0
13 (Test for Soundness of Aggregate(IS 2386(5):1963))	2000.0
14 (Test for Alkali aggregate reaction-(IS 2386(7):1963):Chemical method)	3000.0
5.7 TABLE 3 (TOTAL ALKALI CONTENT as Na2O)	1200.0
5.7 TABLE 3 (TOTAL SULPHATE CONTENT as SO3)	1200.0
5.7 TABLE 3 (ACID SOLUBLE CHLORIDE CONTENT)	1200.0

103

IS 12406 (2021) - Medium density fibre boards for general purpose - Specification (First Revision)

Medium density fibre boards for general purpose - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9, Table 3 and 4, Sl No (x) (Screw Withdrawal Strength-IS 2380 (Part 14): 1977)	1500.0
9, Table 3 and 4, Sl No (vii) (Internal Bond strength after cyclic/accelerated water resistance test-IS 12406:2021 & IS 2380 (Part 5): 1977)	2000.0
9, Table 3 and 4, Sl No (vi) (Internal Bond Strength-IS 2380 (Part 5): 1977)	2000.0
9, Table 3 and 4, Sl No (viii) (Modulus of Rupture -IS 2380 (Part 4): 1977)	2500.0
9, Table 3 and 4, Sl No (ix) (Modulus of Elasticity-IS 2380 (Part 4): 1977)	2000.0
9, Table 3 and 4, Sl. No. (v) (Linear Expansion (thickness swelling of water) due to general absorption after 24 hr soaking -IS 2380 (Part17): 1977)	1000.0
9, Table 3 and 4, Table 3 & 4, Sl. No. (iii) & (iv) (Moisture Content-IS 2380 (Part 3): 1977)	1000.0
9, Table 3 & 4, Sl. No. (i) & (ii) (Density-IS 2380 (Part 3): 1977)	500.0
8, Table 2 (Dimension & Tolerances-IS 12406:2021, Annex A)	500.0
7 (Finish-IS 12406:2021)	1000.0

104

IS 9162 (1979) - Methods of tests for epoxy resins, hardeners and epoxy resin compositions for floor topping

Methods of tests for epoxy resins, hardeners and epoxy resin compositions for floor topping

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3 (Amine value)	2000.0
6 (Specific gravity)	1200.0

105

IS 10026 : Part 2 (1999) - Insulating varnishes containing solvents: Part 2 methods of tests (First Revision)

Insulating varnishes containing solvents: Part 2 methods of tests (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Custom (Test results (Chemical))	6000.0
Custom (Test results (Electrical))	15000.0

106

IS 4722 - ROTATING ELECTRICAL MACHINES

ROTATING ELECTRICAL MACHINES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
30.2 (Insulation Résistance test before Dielectric test)	5000.0
30.1 (HV test at rated voltage plus 1kV)	3000.0
30.2.a (Insulation Résistance test after Dielectric test)	5000.0

107

IS:16353-2015 -CLINKER - PORTLAND CEMENT CLINKER

PORTLAND CEMENT CLINKER

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
custom (Compressive strength- 24±1h[on the lines of IS 4031(6)])	1000.0
6.1-Table 2 (Compressive strength-72±1h[ IS 4031(6)])	1000.0
6.1-Table 2 (Compressive strength-168±2h[ IS 4031(6)])	1000.0
6.1-Table 2 (Compressive strength-672±4h[ IS 4031(6)])	1000.0
custom (Consistency[IS 4031(4)])	500.0
Table 1 Cl 5 (Ratio of percentage of Alumina to that of Iron Oxide)	1000.0
Table 1 Cl 5 (Ratio of percentage of lime to percentages of silica, alumina and iron oxide)	1000.0
Table 1 Cl 5 (Total sulphur content calculated as sulphuric anhydride (SO3))	500.0
Table 1 Cl 5 (Free lime, percent by mass,)	1500.0
Table 1 Cl 5 (Chloride content, percent by mass,)	200.0
Table 1 Cl 5 (Magnesia (as MgO), percent by mass)	1500.0
Table 1 Cl 5 (Insoluble residue, percent by mass)	500.0
Table 1 Cl 5 (Total loss on ignition , Percent by mass)	500.0
Table 1 Cl 5 (Silica (as SiO2), Percent by mass)	500.0
Table 1 Cl 5 (Aluminium Oxide (as Al2O3), Percent by mass)	500.0
Table 1 Cl 5 (Iron Oxide (as Fe2O3), Percent by mass)	500.0
Table 1 Cl 5 (Alkali content (as Na2O), percent by mass)	500.0
Table 1 Cl 5 (Alkali Content (as K2O). Percent by mass)	500.0
Table 1 Cl 5 (Calcium Oxide (as CaO), Percent by mass)	1000.0
6.1 (Fineness: [IS 4031(2)])	1000.0
6.1-Table 2 (Soundness-Le-Chatelier method :IS 4031(3))	500.0
6.1-Table 2 (Soundness-Autoclave method [IS 4031(3)])	1000.0
6.1-Table 2 (Setting Time-Initial setting time[IS 4031(5)])	500.0
6.1-Table 2 (Setting Time-Final setting time: [IS 4031(5)])	500.0

108

IS 16353 (2015) - Portland Cement Clinker - Specification

Portland Cement Clinker - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

109

IEC 60214-1:2014 - Tap-changers – Part 1: Performance requirements and test methods

Tap-changers – Part 1: Performance requirements and test methods

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Cl.no: 5.2.6.2 Mechanical endurance test as per IEC 60214-1)	20000.0
2 (Pressure and vacuum tests as per clause 5.2.6.5 of IEC 60214-1 2014)	5000.0
3 (Mechanical load test as per IEC 60214-1 2014 clause 6.2.1)	15000.0
4 (Overrun test as per IEC 60214-1 2014 clause 6.2.2)	1500.0
5 (Five Witness charges)	25000.0
6 (Drawing Verification)	3000.0
5.2.2 & 7.2.2 (Temperature Rise of Contact)	10000.0
5.2.6.3 (Sequence Test)	5000.0
5.2.5.1 (Transition Impedance test)	7000.0

110

IS 303 (1989) - Plywood for General Purposes -

Plywood for General Purposes -

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 & Table 3 (Dimensions and Tolerances-IS 303:1989, Annex C)	2000.0
9 (Workmanship & Finish-IS 303:1989)	1500.0
11.3 (Moisture content-IS 1734 (Part 1):1983)	1000.0
11.4 & Table 4 (Static Bending Strength-IS 1734 (Part 11):1983)	3000.0
11.2.1 (Glue Adhesion-Water Resistance Test- IS 303:1989 & IS 1734 (Part 5):1983)	2000.0
11.2.2 (Glue Adhesion-Mycological Test -IS 1734 (Part 7):1983 & IS 1734 (Part 5):1983)	1500.0
5, Table 1 & 2 (Classification by Appearance-IS 303:1989)	2000.0

111

IS 12089 (1987) - Specification for Granulated Slag for the Manufacture of Portland Slag Cement

Specification for Granulated Slag for the Manufacture of Portland Slag Cement

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0.3 (Moisture)	1000.0
3.2 (Manganese oxide)	1000.0
3.2 (Magnesium oxide (MgO))	1000.0
3.2 (Sulphide sulphur)	1000.0
3.3 ([CaO + MgO + 1/3 Al2O3] / [SiO2 + 2/3 Al2O3])	6000.0
3.3 ([CaO + MgO + Al2O3] / SiO2)	6000.0
3.3 ([CaO + CaS + 1/2 MgO + Al2O3] / [SiO2 + MnO])	6000.0
3.4 (Insoluble residue)	1000.0

112

Custom/SR/Chemical/Water (2023) - Custom Standard from CPWD-Karaikal for STP/WTP Treated Water

Custom Standard from CPWD-Karaikal for STP/WTP Treated Water

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1. (pH)	1000.0
2. (Bio-chemical oxygen demand (BOD))	3000.0
3. (Total suspended solids)	1000.0
4. (Chemical oxygen demand (COD))	2000.0
5. (Nitrogen)	1000.0
6. (Phosphorous)	1000.0
7. (Fecal coliform)	1000.0
8. (Oil & grease)	1000.0
9. (Total dissolved soilds (TDS))	1000.0
10 (Coliform)	1000.0

113

Custom/SR/Chemical/Phosphating Chemical (2023) - Custom Standard from Ordinance Factory for Phosphating Solution Hot Dip Type

Custom Standard from Ordinance Factory for Phosphating Solution Hot Dip Type

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1. (Appearance)	1000.0
2. (Specific gravity)	1000.0
3. (pH of 10% solution)	1000.0
4. (Free acidity as H3PO4)	1000.0
5. (Manganese compound as Mn)	1000.0

114

CUS/SR/MECH-46 (2024) - Beater

Beater

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Length, mm)	1000.0
2.0 (Weight, gm)	500.0

115

CUS/SR/MECH-45 (2024) - Cleaning Aid

Cleaning Aid

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Length, mm)	1000.0
2.0 (Weight, gm)	500.0

116

IS 3203 (1982) - TESTING LOCAL THICKNESS OF ELECTROPLATED COATINGS

TESTING LOCAL THICKNESS OF ELECTROPLATED COATINGS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.0 (Coating Thickness by Microscopic method)	2000.0
4.0 (Coating Thickness by Magnetic Instrument)	2000.0

117

Custom/SR/Chemical/MISC (2023) - Custom Standard for Miscellaneous Chemical Samples

Custom Standard for Miscellaneous Chemical Samples

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Urea (as N))	2000.0
2. (pH)	1000.0
3. (Biuret)	1000.0
4. (Turbidity)	1000.0
5. (Alkalinity (as NH3))	1000.0
6. (Ash content)	2000.0
7. (Iron)	1000.0
8. (Chloride)	1000.0
9. (Colour)	1000.0
10. (Moisture)	1000.0
11. (Sulphur (as S))	1000.0
12. (Total phosphorous (as P2O5))	1000.0
13. (Chloride content)	1000.0
Custom (Total Heterotropic Plate Count; Test method: On the lines of IS 5402 : 2012.)	1000.0

118

CSD-TDS Samples (2023-12) - CSD TDS ALL Index

CSD TDS ALL Index

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Dimensions)	1000.0
2 (Weight)	1000.0
3 (Colour (visual))	1000.0
4 (Design (visual as per TDS))	1000.0
5 (Composition/Active Ingredients (visual))	1000.0
6 (Raw material/Fillers (visual))	1000.0
7 (Composition/Active Ingredients (Visual/Standard method))	2000.0
8 (Raw material/Fillers (Visual/Standard method))	2000.0
9 (Parts and their specification (Visual Annexure-1))	1000.0
10 (Identification Marks/Marking (visual))	1000.0
11 (item as SECONDS (visual))	1000.0
12 (Finish and Workmanship (visual))	1000.0
13 (Mesh GSM)	1000.0
14 (Lace Strength)	2000.0
15 (Lining GSM)	1000.0
16 (Synthetic GSM)	1000.0
17 (item as REJECT (visual))	1000.0
18 (Capacity with Tolerance (ID))	1000.0
19 (Capacity in volume, Ltrs.)	1000.0
20 (Luggage Type(visual))	1000.0
21 (Fabric (Polyester))	2000.0
22 (Wheels (visual))	1000.0
23 (Locks (FCL) (visual))	1000.0
24 (Interior - Polyester Lining)	2000.0
25 (Interior packing Strap (visual))	1000.0
26 (Interior- One Net pad pocket (visual))	1000.0
27 (Puller (visual))	1000.0
28 (Trolley(visual))	1000.0
29 (Handle (visual))	1000.0
30 (Pocket (visual))	1000.0
31 (Visual Inspection)	1000.0
32 (Polyester Fabric (material))	2000.0
33 (Combination Lock (visual))	1000.0
34 (Trolley system (visual))	1000.0
35 (Expandable features (visual))	1000.0
36 (Front zipper pocket(visual))	1000.0
37 (Wheeling system 360deg (visual))	1000.0
38 (Internal packing pocket (visual))	1000.0
39 (Full side corner guards (visual))	5.0
40 (Nylon Twill fabric (material identification))	2000.0
41 (Three compartment and Padded Handle (visual))	1000.0
42 (Two Water Bottle Holder (visual))	1000.0
43 (Multilevel organiser and coin pouch (visual))	1000.0
44 (Front and Secret pocket (visual))	1000.0
45 (Interior Skybag Logo Printed (visual))	1000.0
46 (Interior One main compartment with top, bottom and side opening (visual))	1000.0
47 (Interior Side mesh pocket (visual))	1000.0
48 (Interior Top pocket (visual))	1000.0
49 (Raincover (visual))	1000.0
50 (600D Polyester with EVA lamination on Front)	4000.0
51 (Steel square trolley with push button (visual))	5.0
52 (1U shape pocket (visual))	1000.0
53 (EVA Laminated on back (Material identification))	2000.0
54 (Non Padded Handle (visual))	1000.0
55 (Shoulder Carrying Strap in Webbing (visual))	1000.0
56 (170D Lining inside with Safari Logo (visual))	1000.0
57 (Composition/Active Ingredients GM Chopper (Standard method))	12000.0
58 (Packing type & Specification (visual))	1000.0
59 (Colour Fastness to Light)	5000.0
60 (Material 100% Cotton)	2000.0
61 (Colour fastness to Rubbing (Dry and Wet))	4000.0
62 (Colour Fastness to Washing, change in colour)	2000.0

119

NTH/WI/MC 12 (2019) - Dimension calibration

Dimension calibration

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Dimension calibration)	2000.0

120

CUS/SR/MECH-44 (2023) - Shear Pad

Shear Pad

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Breaking load, Ton)	5000.0

First
Prev
3
4
5
6
Next
Last