| 91 |
IS 8042 (2015) - White portland cement - Specification (Third Revision) |
White portland cement - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (Compressive strength, ,672±4 h [as per IS 4031 (Part 6)], MPa) |
1000.0 |
|
| 6 (Compressive strength, 168 ± 2 h [as per IS 4031 (Part 6)], MPa) |
1000.0 |
|
| 6 (Compressive strength, 72±1 h [as per IS 4031 (Part 6)], MPa) |
1000.0 |
|
| 6 (Setting time Final [as per IS 4031 (Part 5)], minutes) |
500.0 |
|
| 6 (Setting time Initial [as per IS 4031 (Part 5)], minutes) |
500.0 |
|
| 6 (Soundness-autoclave method [as per IS 4031 (Part 3)], %) |
1000.0 |
|
| 6 (Soundness-Lechatlier method [as per IS 4031 (Part 3)], mm) |
500.0 |
|
| 6 (Fineness [as per IS 4031 (Part 2)], m^2/kg) |
1000.0 |
|
| 5 (Magnesia (as per IS 4032), %) |
500.0 |
|
| 5 (Insoluble Residue (as per IS 4032), %) |
500.0 |
|
| 5 (Iron Oxide (as per IS 4032), %) |
500.0 |
|
| 5 (Ratio of lime to silica, alumina and iron oxide (as per IS 4032)) |
1000.0 |
|
| 5 (Total Sulphur Content calculated as SO3 (as per IS 4032), %) |
500.0 |
|
| 5 (Loss on ignition, (as per IS 4032), %) |
500.0 |
|
| 5 (Chloride Content, (as per IS 4032), %) |
500.0 |
|
|
| 92 |
NTH/NER/Custom/2023/05 (2023) - Test for Paints, Varnishes and Related Products |
Test for Paints, Varnishes and Related Products |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Scratch Hardness Test up to 1000g) |
2000.0 |
|
| 2 (Neutral Salt Spray Test (96 hours)) |
8000.0 |
|
|
| 93 |
NTH/NER/Custom/2023/04 (2023) - Chemical Instrumental Analysis |
Chemical Instrumental Analysis |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Iron (as Fe), pecent by mass) |
500.0 |
|
| 2 (Aluminium (as Al), percent by mass) |
500.0 |
|
| 3 (Tin (as Sn), percent by mass) |
500.0 |
|
| 4 (Manganese (as Mn), percent by mass) |
500.0 |
|
| 5 (Nickel(as Ni), percent by mass) |
500.0 |
|
| 6 (Chromium (as Cr), percent by mass) |
500.0 |
|
| 7 (Lead (as Pb), percent by mass) |
500.0 |
|
| 8 (Zinc (as Zn), percent by mass) |
500.0 |
|
| 9 (Copper (as Cu), percent by mass) |
500.0 |
|
| 10 (Silicon, percent by maas) |
1000.0 |
|
| 11 (Magnesium, percent by mass) |
1000.0 |
|
|
| 94 |
IS 733 (1983 RA 2022) - SPECIFICATION FOR WROUGHT ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS AND SECTIONS
(FOR GENERAL ENGINEERING PURPOSES) |
SPECIFICATION FOR WROUGHT ALUMINIUM AND ALUMINIUM ALLOY BARS, RODS AND SECTIONS
(FOR GENERAL ENGINEERING PURPOSES) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.1.1 a Chemical composition (Aluminium (as Al )content,% by mass) |
3000.0 |
|
| 5.1.1 b Chemical composition (Copper (as Cu)content,% by mass) |
500.0 |
|
| 5.1.1 C Chemical composition (Magnesium(as Mg ) content,% by mass) |
500.0 |
|
| 5.1.1 d Chemical composition (Silicon (as Si) content,% by mass) |
500.0 |
|
| 5.1.1 e Chemical composition (Iron (as Fe) content,% by mass) |
500.0 |
|
| 5.1.1 f Chemical composition (Manganese (as Mn) content,% by mass) |
500.0 |
|
| 5.1.1 g Chemical composition (Zinc (as Zn ) content,% by mass) |
500.0 |
|
| 5.1.1 h Chemical composition (Titanium (as Ti) content,% by mass) |
500.0 |
|
| 5.1.1 i Chemical composition (Chromium (as Cr) content,% by mass) |
500.0 |
|
| 5.1.1 j Chemical composition (Vanadium (as V) content,% by mass) |
500.0 |
|
|
| 95 |
FCO -1985 (1985) - The Fertiliser (Control) Order 1985 (as amended upto Nov 2023) |
The Fertiliser (Control) Order 1985 (as amended upto Nov 2023) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Schedule I Part A (Water soluble potash (as K2O)) |
1000.0 |
|
| Schedule I Part A (Water soluble phosphate (as P2O5)) |
1000.0 |
|
| Schedule I Part A (Ammoniacal nitrogen) |
1000.0 |
|
| Schedule I Part A (Total nitrogen) |
1000.0 |
|
| Schedule I Part A (Moisture) |
1000.0 |
|
| Schedule I Part A (Matter insoluble in water) |
1000.0 |
|
| Schedule I Part A (Moisture) |
1000.0 |
|
| Schedule I Part A (Particle size – Not less than 90 per cent of the material shall pass through 4 mm IS sieve and be retained on 1 mm IS sieve and not more than 5 per cent shall be below 1 mm IS sieve.) |
1000.0 |
|
| Schedule I Part A (Particle size – Not less than 90 per cent of the material shall pass through 4 mm IS sieve and retained on 1mm IS sieve.) |
1000.0 |
|
| Schedule I Part A (Available Phosphorous percent by weight) |
1000.0 |
|
| Schedule I Part A (Free phosphoric acid (as P 2O5)) |
1000.0 |
|
| Schedule I Part A (Sulphate Sulphur percent by weight) |
1000.0 |
|
| Schedule I Part A (Biuret) |
1000.0 |
|
| Schedule I Part A (Neem oil content soluble in Benzene,) |
1000.0 |
|
| Schedule I Part A (Magnesium (as Mg)) |
1000.0 |
|
| Schedule I Part A (Elemental sulphur (as S)) |
1000.0 |
|
| Schedule I Part A (Neutral ammonium citrate soluble phosphate (as P2O5)) |
1000.0 |
|
| Schedule I Part A (Iron (as Fe)) |
1000.0 |
|
| Schedule I Part A (Copper (as Cu)) |
1000.0 |
|
| Schedule I Part A (Manganese (as Mn)) |
1000.0 |
|
| Schedule I Part A (Cadmium (as Cd)) |
1000.0 |
|
| Schedule I Part A (Molybdenum (as Mo)) |
1000.0 |
|
| Schedule I Part A (Lead (as Pb) ) |
1000.0 |
|
| Schedule I Part A (Nitrate nitrogen) |
1000.0 |
|
| Schedule I Part A (Magnesium as MgO) |
1000.0 |
|
| Schedule I Part A (Boron (as B)) |
1000.0 |
|
| Schedule I Part A (Water soluble calcium (as Ca)) |
1000.0 |
|
| Schedule I Part A (Zinc (as Zn)) |
1000.0 |
|
| Schedule I Part A (Arsenic (as As)) |
1000.0 |
|
| Schedule I Part A (pH (5 % solution)) |
1000.0 |
|
| Schedule I Part A (Total Chloride (as Cl) percent by weight) |
1000.0 |
|
| Schedule I Part A (Free acid (as H2SO4)) |
1000.0 |
|
| Schedule I Part A (Specific gravity (kg/l)) |
1000.0 |
|
| Schedule I Part A (Sodium as NaCl) |
1000.0 |
|
| Schedule I Part A (Particle Size) |
1000.0 |
|
|
| 96 |
IS 2830 (2012) - Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision) |
Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purposes - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 97 |
IS 4759 (1996) - Hot - Dip zinc coatings on structural steel and other allied products - Specification (Third Revision) |
Hot - Dip zinc coatings on structural steel and other allied products - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.1 (Mass of Zinc Coating, (g/m2)) |
2000.0 |
|
| 9.3 (Determination of Uniformity of Galvanizing Coating) |
1000.0 |
|
|
| 98 |
IS 6911 (2017) - Stainless steel plate, sheet and strip - Specification (Second Revision) |
Stainless steel plate, sheet and strip - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Cl 7.1 & 7.2 of Table 1 (Carbon (as C), Percent) |
1000.0 |
|
| Cl 7.1 & 7.2 of Table 1 (Silicon (as Si), Percent) |
1000.0 |
|
| Cl 7.1 & 7.2 of Table 1 (Manganese (Mn), Percent) |
1000.0 |
|
| Cl 7.1 & 7.2 of Table 1 (Nickel (as Ni), Percent) |
1000.0 |
|
| Cl 7.1 & 7.2 of Table 1 (Chromium (as Cr), Percent) |
1000.0 |
|
| Cl 7.1 & 7.2 of Table 1 (Molybdenum (Mo), Percent) |
1000.0 |
|
| Cl 7.1 & 7.2 of Table 1 (Sulphur (as S), Percent) |
1000.0 |
|
| Cl 7.1 & 7.2 of Table 1 (Phosphorus (as P), Percent) |
1000.0 |
|
| 7.1 & 7.2 (Copper) |
1200.0 |
|
| Cl 7.1 & 7.2 of Table 1 (Nitrogen (as N), Percent) |
1000.0 |
|
| 10 (Yield Stress) |
1000.0 |
|
| 10 (Tensile strength) |
1000.0 |
|
| 10 (Elongation) |
1000.0 |
|
| 7. (Chemical Composition (in Annexure) - as per IS 9879:1998) |
5000.0 |
|
|
| 99 |
IS 3812 (Part 1) (2013) - Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete |
Pulverized fuel ash - Specification: Part 1 For use as pozzolana in cement, cement mortar and concrete |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.1 ,6.1 (Loss on ignition) |
500.0 |
|
| 5.1 ,6.1 (Total Chlorides) |
500.0 |
|
| 5.1 ,6.1 (Available alkali as equivalent sodium oxide (Na2O)) |
500.0 |
|
| 5.1 ,6.1 (Total Sulphur as sulphur trioxide(SO3)) |
500.0 |
|
| 5.1 ,6.1 (Magnesium oxide(MgO)) |
500.0 |
|
| 5.1 ,6.1 (Reactive Silica) |
500.0 |
|
| 5.1 ,6.1 (Silicon dioxide(SiO2)) |
500.0 |
|
| 5.1 ,6.1 (Silicon dioxide(SiO2) plus aluminium oxide (Al2O3) plus iron oxide (Fe2O3)) |
500.0 |
|
| 7.1 ( Lime reactivity — Average compressive strength ) |
3000.0 |
|
| 7.1 (Particles retained on 45 micron IS sieve (wet sieving) ) |
1000.0 |
|
| 7.1 (Fineness — Specific surface by Blaine’s permeability method) |
1000.0 |
|
| 7.1 (Soundness by autoclave test — Expansion of specimen ) |
1500.0 |
|
| 7.1 (Compressive strength at 28 days ) |
3000.0 |
|
|
| 100 |
IS 16415 (2015) - Composite cement - Specification |
Composite cement - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 101 |
IS 2629 (1985 (Reaffirmed 2021)) - Recommended Practice for Hot-Dip Galvanizing of Iron and Steel – Specification |
Recommended Practice for Hot-Dip Galvanizing of Iron and Steel – Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.2 (Uniformity in Thickness) |
1000.0 |
|
| 6.3 (Mass of Coating) |
2000.0 |
|
|
| 102 |
IS 16353 (2015) - Portland Cement Clinker - Specification |
Portland Cement Clinker - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Insoluble residue) |
600.0 |
|
| 5 (Total loss on ignition) |
600.0 |
|
| 5 (Alkali content expressed as sodium oxide(Na2O)) |
1200.0 |
|
| 5 (Magnesia) |
600.0 |
|
| 5 (Chloride content) |
500.0 |
|
| 5 (Free lime) |
600.0 |
|
| 5 (Total Sulphur content calculated as sulphuric anhydride(SO3)) |
500.0 |
|
| 5 (C3S + C2S) |
600.0 |
|
| 5 (C3A) |
600.0 |
|
| 5 (C3S) |
600.0 |
|
| 5 (Ratio of percentage of alumina to that of iron oxide) |
600.0 |
|
| 5 (Ratio of percentage of lime to percentage of silica, alumina and iron oxide) |
600.0 |
|
|
| 103 |
NTH/NER/Custom/2022/02 - Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry. |
Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry. |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Carbon, percent) |
700.0 |
|
| - (Manganese, percent) |
700.0 |
|
| - (Silicon, percent) |
700.0 |
|
| - (Sulphur, percent) |
700.0 |
|
| - (Phosphorous, percent) |
700.0 |
|
|
| 104 |
NTH/NER/Custom/2022/01 - Powder coating on metallic surfaces |
Powder coating on metallic surfaces |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Thickness of coating in micron) |
2000.0 |
|
|
| 105 |
IS 1868 (1996) - Anodic coatings on aluminium and its alloys - Specification (Third Revision) |
Anodic coatings on aluminium and its alloys - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9.2 c (Eddy current method) (Thickness of Coating, Micron) |
2000.0 |
|
|
| 106 |
IS 1290 (2023) - Specification for Mineral Gypsum (Third Revision) |
Specification for Mineral Gypsum (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.2 (i) (Free water, percent by mass) |
1000.0 |
|
| 4.2 (iii) (Silica & other insoluble matter, percent by mass) |
1000.0 |
|
| 4.2 (iv) (Iron & aluminium (as oxides), percent by mass) |
1000.0 |
|
| 4.2 (v) (Magnesium oxide (as MgO), percent by mass) |
1000.0 |
|
| 4.2 (vi) (Calcium sulphate (as CaSO4), percent by mass) |
1000.0 |
|
| 4.2 (vii) (Chlorides (as NaCl), percent by mass) |
1000.0 |
|
|
| 107 |
IS 383:2016 (for Coarse aggregates) (2016) - Coarse and fine aggregate for Concrete for concrete-Specification |
Coarse and fine aggregate for Concrete for concrete-Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 10 (Test for Combined Flakiness and Elongation Index
( IS:2386(part -I)1963)) |
3000.0 |
|
| 4 (Test for Aggregate Impact Value(IS 2386(Part 4):1963)) |
1500.0 |
|
| 6 (Test for Aggregate Abrasion Value(IS 2386(Part 4):1963)) |
1500.0 |
|
| 1 (Test for Size and Grading of Aggregate (IS:2386(part -1)1963)) |
2000.0 |
|
| 2 (Test for Specific Gravity ( IS:2386(part -III)1963)) |
500.0 |
|
| 3 (Test for Water absorption ( IS:2386(part -III)1963)) |
1000.0 |
|
| 13 (Test for Soundness of Aggregate(IS 2386(5):1963)) |
2000.0 |
|
| 7 (Test for Bulk Density-Loose condition (IS:2386(part-III)-1963)) |
500.0 |
|
| 8 (Test for Bulk Density-Compacted condition ( IS:2386(part-III)-1963)) |
500.0 |
|
| 11 (Test for Surface moisture(IS 2386(3):1963)) |
1000.0 |
|
| 14 (Test for Alkali aggregate reaction-(IS 2386(7):1963):Chemical method) |
3000.0 |
|
| 5 (Test for Aggregate Crushing Value(IS 2386(Part 4):1963)) |
1500.0 |
|
| 12 (Test for Deleterious Materials(IS 2386(Part 2):1963)) |
2000.0 |
|
|
| 108 |
IS 383 (2016) - Coarse and Fine Aggregate for Concrete - Specification (Third Revision) [All Tests 2386] |
Coarse and Fine Aggregate for Concrete - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.3 (Combined Elongation Index and Flakiness Index) |
3000.0 |
|
| 5.4.2 (IS:2386(Pt.-4)_Impact Value, %) |
1500.0 |
|
| 5.4.3 (IS:2386(Pt.-4)_Abrasion Value, %) |
1500.0 |
|
| 6 (IS:2386(Pt.-1)_Sieve Analysis) |
2000.0 |
|
| 5.7 (Specific Gravity) |
500.0 |
|
| 5.7 (Water Absorption) |
1000.0 |
|
| 6.3 (Gradation for Fine Aggregate) |
2000.0 |
|
| 5.7 (Specific gravity) |
500.0 |
|
| 5.7 (Water Absorption) |
1000.0 |
|
| 5.5 (IS:2386(Pt.-5)_Soundness) |
2000.0 |
|
|
| 109 |
IS 287 (1993) - PERMISSIBLE MOISTURE CONTENT FOR TIMBER USED FOR DIFFERBNT PURPOSES - RECOMMENDATIONS |
PERMISSIBLE MOISTURE CONTENT FOR TIMBER USED FOR DIFFERBNT PURPOSES - RECOMMENDATIONS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Moisture Content, in Percent) |
1200.0 |
|
|
| 110 |
IS 13054 (1991) - Quartzite/quartz for the production of ferroalloys - Specification |
Quartzite/quartz for the production of ferroalloys - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.1 (Silica (as SiO2), percent) |
1200.0 |
|
| 4.1 (Alumina (as Al2O3), Percent) |
1200.0 |
|
| 4.1 (Iron oxide (as Fe2O3). percent) |
1200.0 |
|
| - (Loss on ignition, percent) |
1200.0 |
|
|
| 111 |
IS 14543 (2024) - Packaged Drinking Water (other than Packaged Natural Mineral Water) - Specification |
Packaged Drinking Water (other than Packaged Natural Mineral Water) - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.3 (Colour, true colour units) |
1200.0 |
|
| 5.3 (Taste) |
1000.0 |
|
| 5.3 (Antimony (as Sb)) |
1000.0 |
|
| 5.3 (Barium (as Ba)) |
1000.0 |
|
| 5.3 (Borates (as B)) |
1000.0 |
|
| 5.3 (Calcium (as Ca)) |
1000.0 |
|
| 5.3 (Chloride (as Cl)) |
1000.0 |
|
| 5.3 (Fluoride (as F)) |
1000.0 |
|
| 5.3 (Residual free chlorine) |
1000.0 |
|
| 5.3 (Iron (as Fe)) |
1200.0 |
|
| 5.3 (Nitrate (as NO3)) |
1000.0 |
|
| 5.3 (Nitrite (as NO2)) |
1000.0 |
|
| 5.3 (Odour) |
1000.0 |
|
| 5.3 (pH) |
1000.0 |
|
| 5.3 (Phenolic compounds (as C6H5OH)) |
1000.0 |
|
| 5.3 (Silver (as Ag)) |
1000.0 |
|
| 5.3 (Sulphate (as SO4)) |
1200.0 |
|
| 5.3 (Sulphide (as H2S)) |
1000.0 |
|
| 5.3 (Alkalinity (as HCO3)) |
1000.0 |
|
| 5.3 (Total dissolved solids) |
1000.0 |
|
| 5.3 (Turbidity) |
1000.0 |
|
| 5.2.9 (Vibrio parahaemolyticus) |
1200.0 |
|
| 5.2.9 (Vibrio cholerae) |
1200.0 |
|
| 5.2.8 (Shigella) |
1200.0 |
|
| 5.2.8 (Salmonella) |
1200.0 |
|
| 5.2.7 (Yeast & Mould) |
1200.0 |
|
| 5.2.6 (Aerobic microbial count/ ml at 37° ± 1° C in 24 hours) |
1200.0 |
|
| 5.2.6 (Aerobic microbial count/ ml at 20-22 °C in 72 hours) |
1200.0 |
|
| 5.2.5 (Pseudomonas aeruginosa) |
1200.0 |
|
| 5.2.4 (Sulphite reducing Anaerobes) |
1200.0 |
|
| 5.2.3 (Staphylococcus aureus) |
1200.0 |
|
| 5.2.3 (Faecal Streptococci) |
1200.0 |
|
| 5.2.2 (Coliform) |
1200.0 |
|
| 5.2.1 (Escherichia coli) |
1200.0 |
|
| 5.3 (Manganese (as Mn)) |
1200.0 |
|
| 5.3 (Sodium (as Na)) |
1000.0 |
|
| 5.3 (Magnesium (as Mg)) |
1000.0 |
|
| 5.3 (Mercury (as Hg)) |
2000.0 |
|
| 5.3 (Nickel (as Ni)) |
1000.0 |
|
| 5.3 (Chromium (as Cr)) |
1000.0 |
|
| 5.3 (Aluminium (as Al)) |
1000.0 |
|
| 5.3 (Arsenic (as As)) |
2000.0 |
|
| 5.3 (Bromate (as BrO3)) |
1200.0 |
|
| 5.3 (Cadmium (as Cd)) |
1000.0 |
|
| 5.3 (Copper (as Cu)) |
1200.0 |
|
| 5.3 (Lead (as Pb)) |
1000.0 |
|
| 5.3 (Selenium (as Se)) |
1000.0 |
|
| 5.3 (Zinc (as Zn)) |
1000.0 |
|
| 5.4.1 (Annex D) (Isoproturon) |
5000.0 |
|
| 5.4.1 (Annex D) (2,4-D) |
5000.0 |
|
| 5.4.1 (Annex D) (Butachlor) |
5000.0 |
|
| 5.4.1 (Annex D) (Alachlor) |
5000.0 |
|
| 5.4.1 (Annex D) (Monocrotophos) |
5000.0 |
|
| 5.4.1 (Annex D) (Malaxon) |
5000.0 |
|
| 5.4.1 (Annex D) (Malathion) |
5000.0 |
|
| 5.4.1 (Annex D) (Paraxon methyl) |
5000.0 |
|
| 5.4.1 (Annex D) (Methyl parathion) |
5000.0 |
|
| 5.4.1 (Annex D) (Phorate sulfoxide) |
5000.0 |
|
| 5.4.1 (Annex D) (Phorate sulfone) |
5000.0 |
|
| 5.4.1 (Annex D) (Phorate) |
5000.0 |
|
| 5.4.1 (Annex D) (Dieldrin) |
5000.0 |
|
| 5.4.1 (Annex D) (Aldrin) |
5000.0 |
|
| 5.4.1 (Annex D) (Atrazine) |
5000.0 |
|
| 5.4.1 (Annex D) (Ethion) |
5000.0 |
|
| 5.4.1 (Annex D) (Chloropyrifos) |
5000.0 |
|
| 5.4.1 (Annex D) (Endosulfan sulphate) |
5000.0 |
|
| 5.4.1 (Annex D) (Beta-Endosulfan) |
5000.0 |
|
| 5.4.1 (Annex D) (Alpha-Endosulfan) |
5000.0 |
|
| 5.4.1 (Annex D) (Delta-HCH) |
5000.0 |
|
| 5.4.1 (Annex D) (Gamma-HCH) |
5000.0 |
|
| 5.4.1 (Annex D) (Βeta-HCH) |
5000.0 |
|
| 5.4.1 (Annex D) (Αlpha-HCH) |
5000.0 |
|
| 5.4.1 (Annex D) (p, p-DDT) |
5000.0 |
|
| 5.4.1 (Annex D) (o, p-DDT) |
5000.0 |
|
| 5.4.1 (Annex D) (p, p-DDE) |
5000.0 |
|
| 5.4.1 (Annex D) (o, p-DDE) |
5000.0 |
|
| 5.4.1 (Annex D) (p, p-DDD) |
5000.0 |
|
| 5.4.1 (Annex D) (o, p-DDD) |
5000.0 |
|
| 5.3 (Polynuclear aromatic hydrocarbons (PAH)) |
2000.0 |
|
| 5.3 (Polychlorinated biphenyls (PCB)) |
2000.0 |
|
| 5.4 (Total pesticide residue) |
5000.0 |
|
| 5.3 (Cyanide (as CN)) |
2000.0 |
|
| 5.3 (Borates (as B)) |
1000.0 |
|
| 5.3 (Anionic Surface active agents (as MBAS)) |
1200.0 |
|
| 5.3 (Mineral oil) |
1000.0 |
|
| Cl No. 5 (Test parameters as per attached Annexure B) |
5000.0 |
|
| Cl No. 5 Table 1, 2 & 3 (Test parameters as per attached Annexure A) |
15000.0 |
|
|
| 112 |
IS 3316 (1974) - Structural Granite |
Structural Granite |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.3 (Water Absorption) |
1000.0 |
|
| 3.2 (Specific Gravity) |
1000.0 |
|
| 3.1 (Compressive Strength) |
2000.0 |
|
|
| 113 |
IS 3204 (1978) - Specification for limestone for chemical industry (First Revision) |
Specification for limestone for chemical industry (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.2 & 5.2.2 (Loss on ignition) |
1000.0 |
|
| 3.2 & 5.2.3 (Silica (as SiO2)) |
1000.0 |
|
| 3.2 & 5.2.4 (Iron (as Fe2O3)) |
1000.0 |
|
| 3.2 & 5.2.5 (Calcium (as CaO)) |
1000.0 |
|
| 3.2 & 5.2.9 (Alumina(Al2O3) and ferric oxide as (Fe2O3) together) |
2000.0 |
|
| 3.2 & 5.2.6 (Magnesium (as MgO)) |
1000.0 |
|
|
| 114 |
IS 15961 :2025 (2025) - Hot Dip Aluminium-Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain)- Specification |
Hot Dip Aluminium-Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain)- Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.2 (Thickness of Sheet (base metal thickness), mm) |
1000.0 |
|
| 3.3 (Coated thickness (total coated thickness), mm) |
1000.0 |
|
| 9.1 (Mass of coating (Both sides), g/Sq m) |
2000.0 |
|
| 7.1 (Carbon. percent) |
500.0 |
|
| 7.1 (Manganese, percent) |
500.0 |
|
| 7.1 (Sulphur, percent) |
500.0 |
|
| 7.1 (Phosphorous, percent) |
500.0 |
|
| 3.2 (Thickness of Sheet (*Base Metal Thickness), mm.) |
1000.0 |
|
| 3.3 (Coated Thickness (*Total Coated Thickness), mm.) |
1000.0 |
|
| 8.3 (Yield Strength) |
1000.0 |
|
|
| 115 |
IS 277 (2018) - Galvanized Steel Sheets (Plain and Corrugated) |
Galvanized Steel Sheets (Plain and Corrugated) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.3 (Thickness of sheet (uncoated), mm) |
1000.0 |
|
| 5.1 (Carbon, % by mass) |
500.0 |
|
| 5.1 (Manganese, % by mass) |
500.0 |
|
| 5.1 (Sulphur, % by mass) |
500.0 |
|
| 5.1 (Phosphorous, % by mass) |
500.0 |
|
| 7 (Mass of Zinc coating ( Total Both sides)) |
2000.0 |
|
|
| 116 |
IS 6745 (1972) - Mass of Zinc Coating (IS 6745) |
Mass of Zinc Coating (IS 6745) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.1 (Mass of Zinc Coating,(IS 6745:1972)) |
2000.0 |
|
|
| 117 |
NTH/NER/Custom/2022/03 - Chemical General |
Chemical General |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Silica (as SiO2), % by mass) |
1000.0 |
|
| 2 (Alumina (as Al2O3), % by mass) |
1000.0 |
|
| 3 (Iron Oxide (as Fe2O3), % by mass) |
1000.0 |
|
| 4 (Calcium Oxide (as CaO), % by mass) |
1000.0 |
|
| 5 (Magnesium Oxide (MgO), % by mass) |
1000.0 |
|
| 6 (Mixed Oxide (as R2O3), % by mass) |
2000.0 |
|
| 7 (Iron (as Fe), % by mass) |
1000.0 |
|
| 8 (Loss on ignition, % by mass) |
1000.0 |
|
| 9. (Sulphuric anhydride (as SO3), % by mass - IS 4032:1985) |
1000.0 |
|
| 10. (Chloride (as Cl), % by mass - IS 4032:1985) |
1000.0 |
|
| 11. (Alkali content (as Na2O), % by mass - IS 4032:1985) |
2000.0 |
|
| 12 (Available lime (as CaO), percent by mass) |
1000.0 |
|
| 13 (Acid insoluble matter ( as SiO2 ), percent by mass) |
1000.0 |
|
| 14 (Particle size (Pass through 2 mm IS sieve)) |
1000.0 |
|
| 16 (Sulphur, percent) |
1000.0 |
|
| 15 (Moisture, percent) |
1000.0 |
|
| 16 (Gross calorific value, KCal/Kg) |
2000.0 |
|
| 18 (Silica (as SiO2)) |
1000.0 |
|
| 19 (Ash content) |
2000.0 |
|
| 20 (Moisture content) |
1200.0 |
|
| 21 (Zinc (as Zn)) |
2000.0 |
|
| 22 (Chromium (as Cr)) |
1200.0 |
|
| 23 (Selenium (as Se)) |
1200.0 |
|
| 24 (Cobalt (as Co)) |
1200.0 |
|
| 25 (Lead (as Pb)) |
1200.0 |
|
| 26 (Cadmium (as Cd)) |
1200.0 |
|
| 27 (Manganese (as Mn)) |
1200.0 |
|
| 28 (Nickel (as Ni)) |
1200.0 |
|
| 29 (Iron (as Fe)) |
1200.0 |
|
|
| 118 |
IS 2185 : Part 3 (1984) - Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks |
Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 8.3 (Block Density, kg/m³) |
1000.0 |
|
| 8.4 (Compressive Strength, in N/mm²) |
12000.0 |
|
| 8.6 (Drying Shrinkage, in %) |
1000.0 |
|
| 8.2 (Dimensions (Length, width and thickness)) |
3000.0 |
|
| 8.1 (General ) |
500.0 |
|
|
| 119 |
IS 10262 (2019) - Concrete Mix Proportioning — Guidelines ( Second Revision ) |
Concrete Mix Proportioning — Guidelines ( Second Revision ) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Concrete Mix Design (IS 10262:2019)) |
35000.0 |
|
| 1 (Concrete Mix Proportioning — Guidelines (without admixture)) |
30000.0 |
|
|
| 120 |
IS 2386 : Part 3 (1963) - Methods of test for aggregates for concrete Part 3 Specific gravity, density, voids, absorption and bulking |
Methods of test for aggregates for concrete Part 3 Specific gravity, density, voids, absorption and bulking |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Surface Moisture) |
500.0 |
|
| 3 (Loose Bulk Density) |
500.0 |
|
| 3 (Compacted Bulk Density) |
500.0 |
|
| 2 (Water Absorption) |
1000.0 |
|
| 2 (Specific Gravity) |
500.0 |
|
|
