| 1 |
IS 9537 (Part 1 & 3) - SPECIFICATION FOR CONDUITS FOR ELECTRICAL INSTALLATIONS |
SPECIFICATION FOR CONDUITS FOR ELECTRICAL INSTALLATIONS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6 (Marking) |
1000.0 |
|
| 7.4 (Uniformity of Wall Thickness) |
1000.0 |
|
| 8 (Construction) |
1000.0 |
|
| 12 (Electrical Strength) |
4000.0 |
|
| 12 (Insulation Resistance) |
4000.0 |
|
|
| 2 |
Custom - Custom specification for Rigid polyurethane Foam |
Custom specification for Rigid polyurethane Foam |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Vide Annexure) |
1000.0 |
|
|
| 3 |
IS 1489(Part 1):2015 - PORTLAND POZZOLANA CEMENT-SPECIFICATION |
PORTLAND POZZOLANA CEMENT-SPECIFICATION |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table1,6.i.a (Insoluble residue, percent by mass-maximum) |
500.0 |
|
| Table1,6.ii (Magnesia, percent by mass) |
500.0 |
|
| Table1,6.iii (Total Sulphur content as sulphuric anhydride (SO3), percent by mass) |
500.0 |
|
| Table1,6.iv (Loss on ignition, percent by mass) |
500.0 |
|
| Table1,6.v (Chloride content, percent by mass) |
500.0 |
|
| Table1,6.vi (Alkali content (%)) |
1000.0 |
|
| Table 2, 7, i (Fineness, sq m/kg) |
1000.0 |
|
| Table 2, 7, iv,a (Compressive strength-MPa, 72±1 h) |
1000.0 |
|
| Table 2, 7, iv,b (Compressive strength-MPa, 168±2 h) |
1000.0 |
|
| Table 2, 7, iv,c (Compressive strength-MPa, 672±4 h) |
1000.0 |
|
| Table 2, 7, iii a (Setting time-Initial, minutes) |
250.0 |
|
| Table 2, 7, iii,b (Setting time-final, minutes) |
250.0 |
|
| Table 2 ,7.ii.a (Soundness-Lechatelier method,mm) |
500.0 |
|
| Table 2 ,7.ii.b (Soundness-autoclave method, percent) |
1000.0 |
|
| Table 2, 7, vi (Drying shrinkage,percent) |
1000.0 |
|
| custom (Consistency (%)) |
500.0 |
|
|
| 4 |
Custom IS 4658 (2019) - Specification for Coated Paper & Art board |
Specification for Coated Paper & Art board |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (vide Annexure) |
12000.0 |
|
|
| 5 |
Custom - Specification for Nitrile Rubber |
Specification for Nitrile Rubber |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Vide Annexure) |
2000.0 |
|
|
| 6 |
IS 15622 Reaffirmed (2017) - Pressed ceramic tiles [All Tests IS 13630] |
Pressed ceramic tiles |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6, Table 5 (Dimensions-Length) |
1000.0 |
|
| 6, Table 5 (Dimensions-Breadth) |
1000.0 |
|
| 6, Table 5 (Dimensions-Thickness) |
1000.0 |
|
| 4.2 (Water Absorption, %) |
1000.0 |
|
| 6, Table 5 (Modulus of Rupture) |
2000.0 |
|
| 6, Table 5 (Modulus of Rupture without Breaking strength) |
3000.0 |
|
| 6, Table 5 (Breaking Strength) |
2000.0 |
|
| 6, Table 5 (Breaking Strength without MoR) |
3000.0 |
|
| 4.2 (Crazing) |
1500.0 |
|
| 6, Table 5 (Scratch Hardness) |
2000.0 |
|
| 6, Table 5 to 9, Sl.(iii),(a,b,c) (Chemical properties - Glazed Tiles - IS 13630 (8):2019) |
3000.0 |
|
| 6, Table 9, Sl.(iii),(a,b,c) (Chemical properties - unglazed Tiles - IS 13630 (7):2019) |
3000.0 |
|
| 6, Table 8 & 9 (Bulk Density) |
1000.0 |
|
|
| 7 |
IS 2250:1981 - Code of Practice for Preparation and use of Masonry Mortars |
Code of Practice for Preparation and use of Masonry Mortars |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6,Table 1 (Grade of Mortar-Mortar mix ratio (IS 1199)) |
5000.0 |
|
|
| 8 |
IS 2250/On the lines of ASTM/IS 1727/2770 - MICRO CONCRETE |
MICRO CONCRETE |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 9 |
Custom - Specification for Paper |
Specification for Paper |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| - (Vide Annexure) |
12000.0 |
|
|
| 10 |
IS 15778 (2007) - Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification |
Chlorinated polyvinyl chloride (Cpvc) pipes for potable hot and cold water distribution supplies - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9.1 (Visual Appearance) |
1000.0 |
|
| 7.1.3 (Length) |
1000.0 |
|
| 7.1.2 (Wall Thickness) |
1000.0 |
|
| 7.1.1 (Diameter at any point ) |
1000.0 |
|
| 7.1 (Diameter) |
1000.0 |
|
| 9.6 (Density) |
1000.0 |
|
| 9.5 (Vicat Softening Temperature) |
1500.0 |
|
|
| 11 |
IS:15778:2007 - CHLORINATED POLYVINYL CHLORIDE (CPVC) PIPES FOR POTABLE HOT AND COLD WATER DISTRIBUTION SUPPLIES |
CHLORINATED POLYVINYL CHLORIDE (CPVC) PIPES FOR POTABLE HOT AND COLD WATER DISTRIBUTION SUPPLIES |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 (Mean Outside Diameter as per IS:15778:2007) |
500.0 |
|
| 7.1.1 (Outside Dia. at any point as per IS:15778:2007) |
500.0 |
|
| 7.1.1 (Max. Outside Dia. at any point as per IS:15778:2007) |
500.0 |
|
| 7.1.1 (Min. Outside Dia. at any point as per IS:15778:2007) |
500.0 |
|
| 7.1.2 (Average Wall Thickness as per IS:15778:2007) |
1000.0 |
|
| 7.1.2 (Min. Wall Thickness as per IS:15778) |
500.0 |
|
| 7.1.2 (Max. Wall Thickness as per IS:15778) |
500.0 |
|
| 9.4 (Reversion Test as per IS:12235(Part-5/sec.1)) |
1000.0 |
|
| 9.1 (Visual Appearance as per IS:15778) |
1000.0 |
|
| 9.5 (Vicat softening Temperature as per IS:12235(Part-2)) |
1000.0 |
|
| 9.6 (Density as per IS:12235 (Part-14)) |
2000.0 |
|
|
| 12 |
IS 1664 (2002) - Mineral mixtures for supplementing cattle feeds - Specification (Fourth Revision) |
Mineral mixtures for supplementing cattle feeds - Specification (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 13 |
AASHTO T 166 (for BC & DBM cores) - AASHTO T 166-Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens |
AASHTO T 166-Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Saturated Surface-Dry Specimens |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 14 |
IS 2052 (2023) - Compounded Feeds for Cattle — Specification |
Compounded Feeds for Cattle — Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 15 |
IS 278 (2009) - Galvanized steel barbed wire for fencing - Specification (Fourth Revision) |
Galvanized steel barbed wire for fencing - Specification (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 12.1 (Breaking Load of Completed Barbed Wire) |
1000.0 |
|
| 12.2.1 (Zinc Coating of Line wire) |
2000.0 |
|
| 12.2.2 (Zinc Coating of Point wire) |
2000.0 |
|
|
| 16 |
IS 13757-1993 RA 2011 (1993 RA 2011) - Burnt Clay Fly Ash Building Bricks-specification |
Burnt Clay Fly Ash Building Bricks-specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.0 Dimensions and Tolerances (Length, Width, Height mm) |
1000.0 |
|
| 7.1 Compressive strength (Compressive strength) |
2000.0 |
|
| 7.2 Water Absorption (Water absorption, %) |
1000.0 |
|
| 7.3 Efflorescence (Efflorescence) |
1000.0 |
|
|
| 17 |
IS 14223 (Part 1):2023 - Polished Building Stones —Specification (Part 1-Granite and Similar Stones) |
Polished Building Stones —Specification (Part 1-Granite and Similar Stones) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5,Table 1-(i) (Specific gravity ( as per IS 1124)) |
1000.0 |
|
| 5,Table-1(ii) (Water absorption (as per IS 1124)) |
1000.0 |
|
| 5,Table-1(vi) (Hardness, in Mohs (as per IS 13630 (Part 13))) |
2000.0 |
|
|
| 18 |
1121 (Stone) (1974) - Method of Test of Natural Building Stone |
Method of Test of Natural Building Stone |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Compressive Strength (Dry Condition), [IS 1121 (Part 1): 1974], N/mm^2) |
3000.0 |
|
| 5 (Compressive Strength (Wet Condition), [IS 1121 (Part 1): 1974], N/mm^2) |
3000.0 |
|
| 5 & 6 (Water Absorption [IS 1124 : 1974], %) |
1000.0 |
|
| 5 & 6 (Specific Gravity [ IS 1124 : 1974]) |
1000.0 |
|
| 13 (Mohs Hardness [ IS 13630 (Part 13) 2019]) |
2000.0 |
|
| 5 & 6 (Porosity [IS 1124 : 1974], %) |
1000.0 |
|
|
| 19 |
IS:8-1994 (1994) - High Heat Duty Fireclay Refractories |
High Heat Duty Fireclay Refractories |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.0 (Loss on Ignition, %) |
1000.0 |
|
| 5.0 (Silica, %) |
1000.0 |
|
| 6.0 (Alumina, %) |
1000.0 |
|
| 7.0 (Iron (as Ferric Oxide), %) |
1000.0 |
|
| 8.0 (Titania, %) |
1000.0 |
|
| 9.1 (Calcium Oxide, %) |
1000.0 |
|
| 9.2 (Magnesium Oxide, %) |
1000.0 |
|
| Part 4 of IS:1528 (Compressive Strength on the lines of Part 4 of IS:1528) |
2000.0 |
|
|
| 20 |
IS 854 (2021) - Textiles Handloom cotton turkish honeycomb and huckaback towels and towelling cloth Specification |
Textiles Handloom cotton turkish honeycomb and huckaback towels and towelling cloth Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.1 (Count of Yarn (Warp)) |
500.0 |
|
| 5.1 (Count of yarn (Weft)) |
500.0 |
|
| 5.1 (Ends/dm) |
500.0 |
|
| 5.1 (Picks/dm) |
500.0 |
|
| 5.1 (Mass) |
1000.0 |
|
| 5.1 (Weave) |
500.0 |
|
| 5.1 (Breaking Load (Warp)) |
1000.0 |
|
| 5.1 (Breaking Load (Weft)) |
1000.0 |
|
| 5.2 (Identification of material) |
2000.0 |
|
| 5.2 (Dimensional Change) |
2000.0 |
|
| 5.2 (Scouring loss) |
2000.0 |
|
| 5.2 (Color fastness to light) |
3000.0 |
|
| 5.2 (Color fastness to washing) |
2000.0 |
|
| 5.2 (Color fastness to rubbing) |
2000.0 |
|
| 5.2 (Wettability) |
1000.0 |
|
|
| 21 |
251 (2024) - SODA ASH, TECHNICAL |
SODA ASH, TECHNICAL |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.1 (Description) |
1200.0 |
|
| 4.2 (Bulk Density) |
1200.0 |
|
| 4.3 (Volatile Matter Content) |
1200.0 |
|
| 4.4 (Sieve Analysis of Dense Grade Soda Ash) |
1200.0 |
|
| 4.5 (Total alkalinity (as Na2CO3)) |
1200.0 |
|
| 4.5 (Matter insoluble in water) |
1200.0 |
|
| 4.5 (Sulphate (Na2SO4)) |
1200.0 |
|
| 4.5 (Chloride (as NaCl)) |
1200.0 |
|
| 4.5 (Iron (as Fe2O3)) |
1200.0 |
|
|
| 22 |
IS 15965 : 2012 (2012) - Pre-painted Aluminium Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain) |
Pre-painted Aluminium Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.3 (Total Coated Thickness (As received condition), mm) |
1000.0 |
|
| 7.1 (Mass of Coating (Both sides), g/m²) |
2000.0 |
|
| 5 (Chemical composition (As per IS 513), % by mass) |
2500.0 |
|
|
| 23 |
IS 10748 (2004) - Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision) |
Hot - Rolled steel strip for welded tubes and pipes - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 & 7.2 (Carbon) |
1500.0 |
|
| 7.1 & 7.3 (Manganese) |
1500.0 |
|
| 7.1 & 7.4 (Sulphur) |
1000.0 |
|
| 7.1 & 7.5 (Phosphorus) |
1000.0 |
|
| 7.1 & 7.6 (CE) |
5000.0 |
|
| 8 (Ultimate Tensile Strength) |
1000.0 |
|
| 9 (Bend Test) |
1000.0 |
|
|
| 24 |
IS 15965: 2012 - Pre-painted Aluminium Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain) |
Pre-painted Aluminium Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 25 |
Standard FSSAI Regulations (2011) - FOOD SAFETY AND STANDARDS (FOOD PRODUCTS STANDARDS AND FOOD ADDITIVES) REGULATIONS |
FOOD SAFETY AND STANDARDS (FOOD PRODUCTS STANDARDS AND FOOD ADDITIVES) REGULATIONS |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 2.10.8 (Chemical Test Results (Wheat Flour)) |
6000.0 |
|
| 2.10.8 (Chemical Test (Rice)) |
7000.0 |
|
|
| 26 |
IS 3757 (1985) - Specification for high strength structural bolts (Second Revision) |
Specification for high strength structural bolts (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 2 (Dimension (Length of bolt)) |
200.0 |
|
| 2 (Dimension (Shank Diameter)) |
200.0 |
|
| 2 (Dimension (Width across the flat)) |
400.0 |
|
| 2 (Dimension (Width across the edge)) |
400.0 |
|
| 2 (Dimension (Height of the head)) |
400.0 |
|
| 4 (Mechanical Properties(Tensile Strength) as per IS 1367(Part-3):2017 Clause No.- 7) |
3000.0 |
|
| 4 (Mechanical Properties(Ultimate Tensile Load) as per IS 1367(Part-3):2017 Clause No.- 7) |
2000.0 |
|
| 4 (Mechanical Properties(Proof Load Test) as per IS 1367(Part-3):2017 Clause No.- 7) |
2000.0 |
|
| 4 (Mechanical Properties( Rockwell Hardness Scale- C) as per IS 1367(Part-3):2017 Clause No.- 7) |
2000.0 |
|
| 0 (Wedge load test) |
3000.0 |
|
| 4 (Carbon) |
500.0 |
|
| 4 (Sulfur) |
500.0 |
|
| 4 (Phosphorus) |
500.0 |
|
|
| 27 |
IS 6623 (2004) - High Strength Structural Nuts |
High Strength Structural Nuts |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Mechanical Properties(Proof Load Test) as per IS 1367(Part-6) clause No.-7) |
3000.0 |
|
| 5 (Mechanical Properties(Rockwell Hardness Scale-C) as per IS 1367(Part-6) clause-7) |
2000.0 |
|
| 4 (Dimension(Height of head),m) |
500.0 |
|
| 4 (Dimension(width across corner),e) |
500.0 |
|
| 4 (Dimension(width across flats),s) |
500.0 |
|
|
| 28 |
IS 6649 (1985) - Specification for hardened and tempered washers for high strength structural bolts and nuts (First Revision) |
Specification for hardened and tempered washers for high strength structural bolts and nuts (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7 (Hardness Rockwell C/ Vickers) |
2000.0 |
|
| 3 (Thickness, S) |
500.0 |
|
| 3 (Chemical Composition as per IS 1570 Part-2.) |
500.0 |
|
| 3 (Inner Diameter, (Φ d1)) |
500.0 |
|
| 3 (Outer Diameter, (Φ d2)) |
500.0 |
|
|
| 29 |
IS 17505(Part-1):2021 - Specification for Thermosetting Insulated Fire Survival Cables for Fixed Installation having Low Emission of Smoke and Corrosive Gases when Affected by Fire for Working Voltages upto and including 1100 Vac and 1500 Vdc |
Specification for Thermosetting Insulated Fire Survival Cables for Fixed Installation having Low Emission of Smoke and Corrosive Gases when Affected by Fire for Working Voltages upto and including 1100 Vac and 1500 Vdc |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Clause 17.1 Table 9 i) b) (Conductor resistance test) |
1500.0 |
|
| Clause 17.1 Table 9 iii (Minimum thickness of insulation) |
250.0 |
|
| Clause 17.1 Table 9 iii (Manufacturer's identification) |
250.0 |
|
| Clause 17.1 Table 9 iii (Average thickness of insulation) |
250.0 |
|
| Clause 17.1 Table 9 iii (Minimum thickness of outer sheath) |
250.0 |
|
| Clause 17.1 Table 9 iii (Average thickness of outer sheath) |
250.0 |
|
| Clause 17.1 Table 9 iii (Minimum thickness of inner sheath) |
250.0 |
|
| Clause 17.1 Table 9 iii (Average thickness of inner sheath) |
250.0 |
|
| Clause 17.1 Table 9 iv) a) (Tensile strength for insulation) |
1000.0 |
|
| Clause 17.1 Table 9 iv) a) (Percentage elongation for insulation) |
1000.0 |
|
| Clause 17.1 Table 9 iv) a) (Variation of tensile strength after ageing for insulation) |
1000.0 |
|
| Clause 17.1 Table 9 iv) a) (Variation in percentage elongation after ageing for insulation) |
1000.0 |
|
| - (2nd Core) |
2000.0 |
|
|
| 30 |
CUS/SR/MECH-55 (2024) - Mechanical Properties of Metal |
Mechanical Properties of Metal |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 11.0 (Yield Load, kN) |
3000.0 |
|
| 10.0 (Tensile Load, kN) |
3000.0 |
|
| 17.0 (Mass per metre run, kg/m) |
1000.0 |
|
| 1.0 (Dimensions, mm) |
2000.0 |
|
| 8.0 (Percentage Elongation, %) |
1000.0 |
|
| 13.0 (Carbon, % by mass) |
500.0 |
|
| 14.0 (Sulphur, % by mass) |
500.0 |
|
| 15.0 (Phosphorus, % by mass) |
500.0 |
|
| 16.0 (Manganese, % by mass) |
500.0 |
|
| 18 (Aluminium, % by mass) |
1000.0 |
|
| 20 (Carbon Equivalent) |
2000.0 |
|
| 6.0 (Tensile strength, N/mm²) |
1000.0 |
|
| 7.0 (Yield strength, N/mm²) |
1000.0 |
|
| 21 (Yield Stress, N/mm²) |
1000.0 |
|
|
