| 61 |
IS 1540 : Part 2 (1990) - Quicklime and hydrated lime for chemical industries - Specification: Part 2 hydrated lime (Third Revision) |
Quicklime and hydrated lime for chemical industries - Specification: Part 2 hydrated lime (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.2 (Moisture) |
1000.0 |
|
| 5.2 (Available Lime (as Ca(OH)2) |
1000.0 |
|
| 5.2 (Acid insoluble matter (as SiO2)) |
1000.0 |
|
| 5.2 (Magnesia ( as MgO)) |
1000.0 |
|
| 5.2 (Manganese ( as Mn2O3 )) |
1000.0 |
|
|
| 62 |
CUSTOM/PAPER/2022 (2022) - CUSTOM/PAPER/2022 |
CUSTOM/PAPER/2022 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.0 (GSM) |
1000.0 |
|
|
| 63 |
IS 1367 : Part 6 (2018) - Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision) |
Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7 (Hardness Test) |
2000.0 |
|
| 7 (Proof Load) |
3000.0 |
|
| 6 (Carbon, % by mass) |
500.0 |
|
| 6 (Manganese, % by mass) |
500.0 |
|
| 6 (Sulphur, % by mass) |
500.0 |
|
| 6 (Phosphorus, % by mass) |
500.0 |
|
| 1.1 (Dimensions) |
1500.0 |
|
|
| 64 |
IS 745:2021 - Handloom Cotton Bed Sheets |
Handloom Cotton Bed Sheets |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| As per table 1 (Count of yarn(warp)) |
500.0 |
|
| As per table 1 (Count of Yarn(weft)) |
500.0 |
|
| As per table 1 (Ends/dm.) |
500.0 |
|
| As per table 1 (Picks/dm.) |
500.0 |
|
| As per table 1 (Mass(g/sq.m)) |
1000.0 |
|
| As per table 1 (Breaking Strength(Revalled strip method)-Warp,N) |
2000.0 |
|
| As per table 1 (Breaking Strength(Revalled strip method)-Weft ,N) |
2000.0 |
|
| As per table 2 (Identification of Material) |
3000.0 |
|
| As per table 2 (pH value of aqueous extract) |
1000.0 |
|
| As per table 2 (Scouring Loss percent(Max.)) |
1500.0 |
|
|
| 65 |
NTH/NER/Custom/2024/03- Instrumental Analysis of Steel Products (2024) - Instrumental Analysis of Steel Products |
Instrumental Analysis of Steel Products |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Carbon, percent- ASTM 415/IS 8811) |
1000.0 |
|
| 2 (Silicon, percent-ASTM 415/IS 8811) |
1000.0 |
|
| 3 (Manganese, percent - ASTM 415/IS 8811) |
1000.0 |
|
| 4 (Sulphur, percent - ASTM 415/IS 8811) |
1000.0 |
|
| 5 (Phosphorous, percent - ASTM 415/IS 8811) |
1000.0 |
|
| 6 (Aluminum, percent- ASTM 415/IS 8811) |
1000.0 |
|
| 7 (Copper, percent - ASTM 415/IS 8811) |
1000.0 |
|
| 8 (Nickel, percent - ASTM 415/IS 8811) |
1000.0 |
|
| 9 (Nitrogen, percent - ASTM 415/IS 8811) |
1000.0 |
|
| 10 (Carbon equivalent - NTH/NER/CH/SOP/OES/02, Issue No. 01) |
1000.0 |
|
| 10 (Silicon, percent) |
1000.0 |
|
| 11 (Magnesium, percent) |
1000.0 |
|
|
| 66 |
NTH/NER/Custom/2024/02- Customized Water Specification as per IS 10500:2012 (2024) - Customized Water Specification as per IS 10500:2012 |
Customized Water Specification as per IS 10500:2012 |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Colour - IS 3025 (Part 4): 2021, Clause 4) |
500.0 |
|
| 2 (Odour - IS 3025 (Part 5) : 2018) |
500.0 |
|
| 3 (Taste - IS 3025 (Part 8) : 2023)) |
500.0 |
|
| 4 (pH value- IS 3025 (Part 11) : 2022) |
500.0 |
|
| 5 (Turbidity - IS 3025 (Part 10) : 2023) |
500.0 |
|
| 6 (Total Dissolved Solids - IS 3025 (Part 16) : 2023) |
500.0 |
|
| 7 (Aluminium (as Al) - IS 3025 (Part 55): 2003) |
500.0 |
|
| 8 (Ammonia (as total ammonia-N) - IS 3025 (Part 34/Sec 1) : 2023, Clause 5.4) |
500.0 |
|
| 9 (Anionic detergents (as MBAS) - Annex K of IS 13428 : 2005) |
500.0 |
|
| 10 (Barium (as Ba) - Annex F of IS 13428 : 2005) |
500.0 |
|
| 11 (Boron (as B) - IS 3025 (Part 57): 2005) |
500.0 |
|
| 12 (Calcium (as Ca) - IS 3025 (Part 40) : 1991, Clause 5) |
500.0 |
|
| 13 (Chloride (as Cl) - IS 3025 (Part 32): 1988, Clause 2/IS 3025 (Part 75) : 2022) |
500.0 |
|
| 14 (Copper (as Cu) - IS 3025 (Part 42): 1992) |
500.0 |
|
| 15 (Fluoride (as F) - IS 3025 (Part 75) : 2022) |
500.0 |
|
| 16 (Free residual chlorine - IS 3025( Part 26) : 2021, Clause 7) |
500.0 |
|
| 17 (Iron (as Fe) - IS 3025 (Part 53) :2003, Clause 7) |
1200.0 |
|
| 18 (Magnesium (as Mg) - IS 3025 (Part 46): 1994) |
500.0 |
|
| 19 (Manganese (as Mn) - IS 3025 (Part 59): 2006) |
500.0 |
|
| 20 (Nitrate (as NO3) - IS 3025 (Part 75): 2022) |
500.0 |
|
| 21 (Phenolic compounds (as C6H5OH) - IS 3025 (Part 43/Sec 1): 2022, Clause 6) |
500.0 |
|
| 22 (Selenium (as Se) - IS 3025 (Part 56): 2003) |
500.0 |
|
| 23 (Silver (as Ag) - Annex J of IS 13428 : 2005) |
500.0 |
|
| 24 (Sulphate (as SO4) - IS 3025 (Part 75) : 2022) |
500.0 |
|
| 25 (Sulphide (as H2S) - IS 3025 (Part 29) : 2022, Clause 7) |
500.0 |
|
| 26 (Total alkalinity as Calcium carbonate - IS 3025 (Part 23): 2023) |
500.0 |
|
| 27 (Total Hardness (as CaCO3) - IS 3025 (Part 21) : 2009) |
500.0 |
|
| 28 (Zinc (as Zn) - IS 3025 (Part 49): 1994) |
500.0 |
|
| 29 (Cadmium (as Cd) - IS 3025 (Part 41) : 2022) |
500.0 |
|
| 30 (Lead (as Pb) - IS 3025 (Part 47) : 1994) |
500.0 |
|
| 31 (Mercury (as Hg) - IS 3025 (Part 48) : 1994) |
500.0 |
|
| 32 (Nickel (as Ni) - IS 3025 (Part 54):2003) |
500.0 |
|
| 33 (Total Arsenic (as As) - IS 3025 (Part 37): 2022) |
500.0 |
|
| 34 (Total Chromium (as Cr) - IS 3025 (Part 52) : 2003) |
500.0 |
|
| 35 (Escherichia coli per 100 ml) |
2000.0 |
|
| 36 (Total Coliform Bacteria per 100 ml) |
1500.0 |
|
| Custom 1 (Chemical test results as per Annexure-A) |
20000.0 |
|
| Custom 2 (Microbiology test results as per Annexure-B) |
5000.0 |
|
|
| 67 |
CUSTOM/GEO TEXTILE/2022 - GEO TEXTILE |
GEO TEXTILE |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 10 (Weight(GSM)) |
1000.0 |
|
| 5.0 (Tensile Strength(MD/CD)) |
6000.0 |
|
| 6.0 (Elongation(MD/CD)) |
2000.0 |
|
| 2.0 (Standard Colour) |
1000.0 |
|
| 13 (Tear Strength) |
2000.0 |
|
| 3.0 (Polymer type) |
5000.0 |
|
| 4.0 (Thickness) |
1000.0 |
|
|
| 68 |
IS 16098 Part 2 (2013) - Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B |
Structured-Wall Plastics Piping Systems for Non-Pressure Drainage and Sewerage Part 2 Pipes and Fittings with Non-Smooth External Surface, Type B |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 (Appearance and Color ) |
1000.0 |
|
| 6.3.5 (Wall Thickness) |
1000.0 |
|
| 6.3.2 (Length) |
1000.0 |
|
| 6.3.1 (Diameter ) |
1000.0 |
|
| 7.2 (Resistance to Heating (Oven Test)) |
2000.0 |
|
| 5.1 (Melt Flow Rate (Base Material)) |
2000.0 |
|
| Firm's request (Density) |
1000.0 |
|
|
| 69 |
IS 16715 (2018) - Ultrafine Ground Granulated Blast Furnace Slag - Specification |
Ultrafine Ground Granulated Blast Furnace Slag - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.2 (moisture content) |
1000.0 |
|
| 4 and 5.1 (Loss on ignition) |
1200.0 |
|
| 4 and 5.1 (Chloride content) |
1200.0 |
|
| 4 and 5.1 (Insoluble residue) |
1200.0 |
|
| 4 and 5.1 (Sulphate (as SO3)) |
1200.0 |
|
| 4 and 5.1 (Magnesium oxide (MgO)) |
1200.0 |
|
| 4 and 5.1 (Manganese oxide (MnO)) |
1200.0 |
|
| 4 and 5.1 (Sulphide sulphur (S)) |
1200.0 |
|
| 4 and 5.1 ((CaO + CaS + 0.5MgO + Al2O3)/ (SiO2 + MnO)) |
1000.0 |
|
| 4 and 5.1 ((CaO + MgO + Al2O3)/(SiO2)) |
1000.0 |
|
| 4 and 5.1 ((CaO + MgO + 0.33 Al2O3)/(SiO2 + 0.67 Al2O3)) |
1000.0 |
|
|
| 70 |
IS 16714:2018 - Ground Granulated Blast Furnace Slag for Use in Cement, Mortar and Concrete |
Ground Granulated Blast Furnace Slag for Use in Cement, Mortar and Concrete |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.1 Table 1 (Chemical Requirements of GGBS) |
5000.0 |
|
| 5.2 (Moisture content of GGBS) |
1000.0 |
|
| 6,Table 2 (Physical requirements) |
5000.0 |
|
|
| 71 |
NTH/NER/Custom/2024/01- Fence Item (2024) - Custom Specification for Fence Item |
Custom Specification for Fence Item |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (Uniformity of coating- IS 2633:1986) |
1000.0 |
|
| 2 (Mass of zinc coating, g/sq. m - IS 6745:1972) |
2000.0 |
|
| 3 (Powder coating thickness, micron- IS 6012 : 1992) |
1000.0 |
|
|
| 72 |
IS 2721 (2003) - Galvanized steel chain link fence fabric - Specification (Second Revision) |
Galvanized steel chain link fence fabric - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9.2 (Uniformity of Zn coating) |
1000.0 |
|
| 8 (Mass of Zinc Coating) |
2000.0 |
|
|
| 73 |
IS 4984 (2016) - Polyethylene pipes for water supply - Specification (Fifth Revision) |
Polyethylene pipes for water supply - Specification (Fifth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.2 (Colour) |
- |
|
| 7.1 (Visual Appearance) |
500.0 |
|
| 7.4 (Wall Thickness) |
500.0 |
|
| 7.4.1 (Outside Diameter) |
500.0 |
|
| firm's request (Density) |
2000.0 |
|
| 8.4 (Melt Flow Rate at 190 degree celcius and 5kgf) |
2000.0 |
|
| 8.2 (Longitudinal Reversion Test) |
2000.0 |
|
| 8.3 (Carbon Black Content) |
2000.0 |
|
| 8.7 (Density at 27 degree celsius (base density)) |
1000.0 |
|
| 8.5 (Oxidation Induction Time) |
2000.0 |
|
| 8.9 (b) (Elongation at break) |
1500.0 |
|
| 8.3 (Carbon Black Dispersion) |
1000.0 |
|
| 8.1 (Internal Pressure Creep Rupture test of pipe for 48 hrs at 80deg.) |
5000.0 |
|
| 8.9 (a) (Yield Strength) |
- |
|
|
| 74 |
MORTH : Part 5 (2013) - SPECIFICATIONS FOR ROAD AND BRIDGE WORKS/ASTM |
SPECIFICATIONS FOR ROAD AND BRIDGE WORKS/ASTM |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Density DAC (Density of Dense Asphaltic Concrete.) |
2000.0 |
|
| Density of SDAC (Density of Semi Dense Asphaltic Concrete) |
2000.0 |
|
| Clause 1 Table 1 (Cutting & Preparation of Core sample -Double Stage) |
1000.0 |
|
| 507 (Thickness of Bituminous Concrete Layer (BC), in mm) |
1000.0 |
|
| 507 (Thickness of DBM Layer (BC), in mm) |
1000.0 |
|
| 505 (Thickness of Dense Bituminous Macadam (DBM), in mm) |
1000.0 |
|
| 505 (Combined Density of Dense Bituminous Macadam (DBM) & BC, in g/cc) |
2000.0 |
|
| 507 (Density / Bulk Specific Gravity of BC ( AASHTO T 166 (21)),) |
2000.0 |
|
| 505 (Density / Bulk Specific Gravity of DBM (AASHTO T 166)) |
2000.0 |
|
|
| 75 |
IS 13871 (2021) - Powder Coating |
Powder Coating |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Clauses 6.6 and 9.1 (Dry film thickness in microns) |
1000.0 |
|
|
| 76 |
2629:1985(Reaff:2016) (2016) - RECOMMENDED PRACTICE FOR
HOT-DIP GALVANIZING OF IRON AND STEEL |
RECOMMENDED PRACTICE FOR
HOT-DIP GALVANIZING OF IRON AND STEEL |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.2 (Uniformity of Coating thickness) |
1000.0 |
|
| 6.3 (Mass of Zinc Coating as per IS 6745) |
3000.0 |
|
| 6.4.3 (Bend Test as per IS 2629) |
4000.0 |
|
|
| 77 |
IS 191 (2007) - Copper - Specification (Fourth Revision) |
Copper - Specification (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.1 (Copper + Silver ) |
2000.0 |
|
| 7.1 (Silver ) |
1000.0 |
|
| 7.1 (Phosphorus ) |
1000.0 |
|
| 7.1 (Iron ) |
1000.0 |
|
| 7.1 (Sulphur) |
1000.0 |
|
| 7.1 (Nickel ) |
1000.0 |
|
| 7.1 (Antimony) |
1000.0 |
|
| 7.1 (Lead ) |
1000.0 |
|
| 7.1 (Tin ) |
1000.0 |
|
| 7.1 (Zinc ) |
1000.0 |
|
|
| 78 |
260 (2001) - ALUMINIUM SULPHATE, NON-FERRIC |
ALUMINIUM SULPHATE, NON-FERRIC |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.2 RESULTS AS PER ANNEXURE (4.2 RESULTS AS PER ANNEXURE) |
5000.0 |
|
|
| 79 |
IS 1848 : Part 1 (2018) - Writing and printing papers - Specification: Part 1 account book, azure lead, bond, cream laid and cream wove/printing white/printing coloured/printing offset, printing maplitho, printing white super calendered and typewriting types (Fifth Revision) |
Writing and printing papers - Specification: Part 1 account book, azure lead, bond, cream laid and cream wove/printing white/printing coloured/printing offset, printing maplitho, printing white super calendered and typewriting types (Fifth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 80 |
IS 8419 : Part 1 (1977) - Requirements for filtration equipment: Part 1 filtration media - Sand and gravel |
Requirements for filtration equipment: Part 1 filtration media - Sand and gravel |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.1.1 (Silica) |
1000.0 |
|
| 3.1.4 (Loss on Ignition) |
1000.0 |
|
| 3.1.2 (Percentage of volume of sand (clay, slit, loam etc.)) |
1000.0 |
|
| 3.1.3 (Acid Soluble Matter) |
1000.0 |
|
| 4.1.3 (Acid Soluble Matter) |
1000.0 |
|
| 4.1.1 (Presence of Inpurities (%)(clay, sand, loam and organic)) |
1000.0 |
|
|
| 81 |
IS 14268 (2022) - Uncoated stress relieved low relaxation seven - Wire (Ply) strand for prestressed concrete - Specification (First Revision) |
Uncoated stress relieved low relaxation seven - Wire (Ply) strand for prestressed concrete - Specification (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.1 (Nominal Mass of strand - IS 14268: 2022.) |
1500.0 |
|
| 6.1 (Nominal Cross- Sectional Area of Strand- IS 14268: 2022.) |
1000.0 |
|
| 6.1 (Nominal Diameter of strand- IS 14268: 2022.) |
1000.0 |
|
| 6.2.2 (0.2% Proof Load of Strand - IS 1608 (Part 1): 2022/ IS 14268: 2022.) |
1000.0 |
|
| 6.2.2 (Breaking Load of Strand- IS 1608 (Part 1): 2022/ IS 14268: 2022.) |
1000.0 |
|
| 6.2.3 (Total Elongation under Load on gauge length of 600 mm- IS 14268: 2022.) |
1000.0 |
|
| 6.2 (Length of lay of Strand- IS 14268: 2022.) |
1000.0 |
|
| 4.2 (Centre wire shall have 1.5% greater in diameter than the surrounding wires - IS 14268: 2022.) |
1000.0 |
|
| 4.1.2 (Carbon (As per IS 7904:2018)) |
500.0 |
|
| 4.1.2 (Sulphur (As per IS 7904:2018)) |
500.0 |
|
| 4.1.2 (Phosphorus (As per IS 7904:2018)) |
500.0 |
|
| 4.1.2 (NIckel (As per IS 7904:2018)) |
500.0 |
|
| 4.1.2 (Chromium (As per IS 7904:2018)) |
500.0 |
|
| 4.1.2 (Manganese (As per IS 7904:2018)) |
500.0 |
|
| 4.1.2 (Silicon (As per IS 7904:2018)) |
500.0 |
|
| 4.1.2 (Copper (As per IS 7904:2018)) |
500.0 |
|
| 4.1.2 (Molybdenum (As per IS 7904:2018)) |
500.0 |
|
| 4.1.2 (Aluminium (As per IS 7904:2018)) |
500.0 |
|
| 4.1.2 (Sulphur+Phosphorus (As per IS 7904:2018)) |
500.0 |
|
| 6.3 (Tensile Strength of Strand- IS 1608 (Part 1): 2022/ IS 14268: 2022, MPa.) |
1000.0 |
|
|
| 82 |
15388 (2003) - Silica Fume Specification (Custom requirements) |
Silica Fume Specification (Custom requirements) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4, Table 1(i) (Silica SiO2 (IS 1727), percent by mass) |
2000.0 |
|
| 4, Table 1(ii) (Moisture Content, percent by mass) |
800.0 |
|
| 4, Table 1(iii) (Loss on ignition (IS 1727), percent by mass) |
1000.0 |
|
| 4, Table 1(iv) (Alkalies as Na2O, (IS 4032), percent) |
1000.0 |
|
| 5, Table 2(ii) (Oversize particle retained on 45 micron IS sieve (IS 1727), percent) |
1000.0 |
|
| 5, Table 2(iv) (Compressive Strength at 7 days as per cent of control sample (IS 1727), %) |
3000.0 |
|
| - - (Specific Gravity [IS 2386(Part 3)]) |
1000.0 |
|
| - - (Bulk Density [IS 2386 (Part 3)], g/cc) |
1000.0 |
|
|
| 83 |
IS 2333 (1992) - Plaster of paris for ceramic industry - Specification (Second Revision) |
Plaster of paris for ceramic industry - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.3 (Calcium Sulphate ( As CaSO4)) |
1200.0 |
|
| 4.2 (Matter Insoluble in HCL) |
1000.0 |
|
| 4.3 (Carbonates ( As CaCO3)) |
1200.0 |
|
| 4.2 (Free moisture) |
500.0 |
|
| 4.3 (Compound water) |
1200.0 |
|
|
| 84 |
IS 14255 (1995) - Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification |
Aertal bunched cables - For working voltages up to and including 1100 Volts - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 10 .1 (1) b (i) (Breaking load) |
1000.0 |
|
| 10.1 (1) b (ii) (Elongation test) |
1500.0 |
|
| 10.1 (1) b (iii) (Conductor resistance) |
1000.0 |
|
| 10.1 (1) a (iii) (Resistance test-Phase1) |
1000.0 |
|
| 10.1 (1) a (iii) (Resistance test-Phase2) |
1000.0 |
|
| 10.1 (1) a (iii) (Resistance test-Phase3) |
1000.0 |
|
| 10.1 (1) e (Insulation Thickness-Minimum-Phase-1) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Minimum-Phase-2) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Minimum-Neutral) |
500.0 |
|
| 10.1 (1) e (Insulation Thickness-Minimum-Phase 3) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Average- Neutral) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Average-Phase-3) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Average-Phase-2) |
250.0 |
|
| 10.1 (1) e (Insulation Thickness-Average-Phase-1) |
250.0 |
|
| 10.1 (1) c (i) (Tensile strength-PH1) |
250.0 |
|
| 10.1 (1) c (i) (Tensile strength-PH2) |
250.0 |
|
| 10.1 (1) c (i) (Tensile strength-NE) |
250.0 |
|
| 10.1 (1) c (i) (Tensile strength-PH3) |
250.0 |
|
| 10.1 (1) c (i) (Elongation-PH1) |
250.0 |
|
| 10.1 (1) c (i) (Elongation-PH2) |
250.0 |
|
| 10.1 (1) c (i) (Elongation-PH3) |
250.0 |
|
| 10.1 (1) c (i) (Elongation-NE) |
250.0 |
|
| 10 .1 (1) d (i) (Elongation) |
250.0 |
|
| 10.1 (1) d (i) (Tensile strength) |
1000.0 |
|
| 10.1 (1) c (iii) (Hot set test-Permanent elongation after cooling) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Permanent elongation after cooling) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Permanent elongation after cooling) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Permanent elongation after cooling) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Elongation under load) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Elongation under load) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Elongation under load) |
250.0 |
|
| 10.1 (1) c (iii) (Hot set test-Elongation under load) |
250.0 |
|
| 10.1 (1) f (Volume resistivity for XLPE) |
500.0 |
|
| 10.2 k (High Voltage) |
1500.0 |
|
|
| 85 |
IS 7098 : Part 1 (1988) - Specification for cross linked polyethylene insulated PVC sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision) |
Specification for cross linked polyethylene insulated PVC sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 17.3 (Marking) |
100.0 |
|
| 15.1 (a) iv (Resistance of conductor-R) |
500.0 |
|
| 15.1 (a) iv (Resistance of conductor-Y) |
500.0 |
|
| 15.1 (a) iv (Resistance of conductor-B) |
500.0 |
|
| 15.1 (a) iv (Resistance of conductor-Black) |
250.0 |
|
| 15.1.C (Minimum thickness of insulation) |
250.0 |
|
| 15.1.C (Minimum thickness of sheath) |
250.0 |
|
| 15.1.C (Average thickness of insulation) |
250.0 |
|
| 15.1.C (Average thickness of sheath) |
250.0 |
|
| 3.1 (Conductor) |
100.0 |
|
| 6.1 (Armouring) |
100.0 |
|
| 8.1 (Conductor) |
100.0 |
|
| 8.3 (Conductor) |
250.0 |
|
| 9.1 (Insulation) |
100.0 |
|
| 9.2 (Insulation) |
250.0 |
|
| 9.3 (Insulation) |
100.0 |
|
| 9.4 (Insulation) |
100.0 |
|
| 10.1 (Core Identification) |
100.0 |
|
| 10.2 (Core Identification) |
100.0 |
|
| 10.3 (CORE IDENTlFICATION) |
100.0 |
|
| 11.1 (Laying up of cores) |
100.0 |
|
| 12.1 (INNER SHEATH (COMMON COVERING)) |
100.0 |
|
| 12.2 (INNER SHEATH (COMMON COVERING)) |
250.0 |
|
| 12.3 (INNER SHEATH (COMMON COVERING)) |
100.0 |
|
| 13.1 (Armouring) |
100.0 |
|
| 13.3 (ARMOURING) |
100.0 |
|
| 13.1.4 (ARMOURING) |
250.0 |
|
| 14.1 (Outer Sheath) |
100.0 |
|
| 14.2 (Outer Sheath) |
250.0 |
|
| 15.1 (a) ii (Tensile Test ) |
500.0 |
|
| 15.1 (a) iii (Wrapping test) |
500.0 |
|
| 15.1.f (Insulation resistance Test) |
2000.0 |
|
| 15.1.e vii (Thermal stability) |
500.0 |
|
| 15.1.f (Volume resistivity at ambient temperature-R) |
500.0 |
|
| 15.1.f (Volume resistivity at ambient temperature-Y) |
500.0 |
|
| 15.1.f (Volume resistivity at ambient temperature-B) |
500.0 |
|
| 15.1.f (Volume resistivity at ambient temperature-Black) |
500.0 |
|
| 15.1.f (Volume resistivity at 90 Degree C-R) |
500.0 |
|
| 15.1.f (Volume resistivity at 90 Degree C-Y) |
500.0 |
|
| 15.1.f (Volume resistivity at 90 Degree C-B) |
500.0 |
|
| 15.1.f (Volume resistivity at 90 Degree C-Black) |
2000.0 |
|
| 15.1.d.iv (Shrinkage test-R) |
250.0 |
|
| 15.1.d.iv (Shrinkage test-Y) |
250.0 |
|
| 15.1.d.iv (Shrinkage test-B) |
250.0 |
|
| 15.1.d.iv (Shrinkage test-Black) |
2000.0 |
|
| 15.1.e iv (Shrinkage test) |
500.0 |
|
| 15.1.e vi (Hot deformation test Depth of indentation,) |
500.0 |
|
| 15.2 (h) (High Voltage AC) |
3500.0 |
|
| 15.1.g (High Voltage test at room temperature) |
2000.0 |
|
| 15.2 (c) (Wrapping test ( for aluminium 1) |
500.0 |
|
| 15.1.h (Flammability Test) |
250.0 |
|
| 15.1.d.iv (Shrinkage test-Black) |
250.0 |
|
| 15.1.e vii (Thermal stability) |
1000.0 |
|
| 15.1.d i (Tensile strength at break-Black) |
250.0 |
|
| 15.1.d i (Tensile strength at break-B) |
250.0 |
|
| 15.1.d i (Elongation at break-Y) |
250.0 |
|
| 15.1.d i (Tensile strength at break-R) |
250.0 |
|
| 15.1.d i (Elongation at break-R) |
250.0 |
|
| 15.1.d ii (Elongation at break-Y) |
250.0 |
|
| 15.1.d i (Elongation at break-B) |
250.0 |
|
| 15.1.d iii (Hot set test-Permanent elongation after cooling-B) |
250.0 |
|
| 15.1.d iii (Hot set test-Permanent elongation after cooling-Y) |
250.0 |
|
| 15.1.d iii (Hot set test-Permanent elongation after cooling-R) |
250.0 |
|
| 15.1.d iii (Hot set test-Elongation under load-Black) |
250.0 |
|
| 15.1.d iii (Hot set test-Elongation under load-B) |
250.0 |
|
| 15.1.d iii (Hot set test-Elongation under load-Y) |
250.0 |
|
| 15.1.d iii (Hot set test-Elongation under load-R) |
250.0 |
|
| 15.1.d i (Elongation at break-R) |
250.0 |
|
| 15.1.d iii (Hot set test-Permanent elongation after cooling-Black) |
250.0 |
|
| 15.1.e i (Elongation at break) |
1000.0 |
|
| 15.1.e i (Tensile strength at break) |
250.0 |
|
| 15.1.d i (Elongation at break-Black) |
250.0 |
|
| 15.1.d i (Tensile strength at break-Y) |
250.0 |
|
| 15.3 (a) (Conductor resistance-Black ) |
500.0 |
|
| 15.3 (a) (Conductor resistance-Red ) |
500.0 |
|
| 15.3 (a) (Conductor resistance-Yellow) |
500.0 |
|
| 15.3 (a) (Conductor resistance-Blue) |
500.0 |
|
| 15.3 (b) (High Voltage AC) |
2000.0 |
|
|
| 86 |
1708 (1986) - Testing of Small Specimen of Timber |
Testing of Small Specimen of Timber |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Part 1 (Moisture Content, in %) |
1000.0 |
|
| Part 2 (Specific Gravity /Density, g/cm3) |
500.0 |
|
|
| 87 |
FCO 1985 (Annexure) - FCO-1985 (Annexure) |
FCO-1985 (Annexure) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 1 (1 to 3 test parameters) |
2000.0 |
|
| 2 (4 to 6 parameters (Vide Annexure)) |
4000.0 |
|
| 3 (7 or more parameters (Vide annexure)) |
7000.0 |
|
| 4 (Please see Annexure (NABL)) |
7000.0 |
|
| 5 (Please see Annexure (Non NABL)) |
7000.0 |
|
|
| 88 |
IS 694 (2010) - Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1100 v (Fourth Revision) |
Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1100 v (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table 1. iii. a. 4 (Conductor resistance test (core 1)) |
1500.0 |
|
| 15 (Marking of the cable) |
1500.0 |
|
| 11.2 (Legibility of marking) |
100.0 |
|
| 11.1 (Durability of marking) |
100.0 |
|
| 11 (Cable identification) |
200.0 |
|
| Table 1. iii. b(5) (Overall dimension) |
500.0 |
|
| 13 (Cable code) |
- |
|
| Table 1. iii. c.1(1) (Tensile strength for insulation(Core 1)) |
1000.0 |
|
| Table 1. iii. a. 2 (Tensile test for Aluminium(core 1)) |
500.0 |
|
| Table 1 tests Sl No 1 (iii) b (Average thickness of insulation) |
250.0 |
|
| Table 1 tests Sl No 1 (iii) b (Minimum thickness of insulation) |
250.0 |
|
| Table 1 tests Sl No 1 (iii) b (Average thickness of sheath) |
250.0 |
|
| Table 1 tests Sl No 1 (iii) b (Minimum thickness of sheath) |
250.0 |
|
| Table 1. iii. c.3(1) (Tensile strength test after ageing for insulation(Core 1)) |
500.0 |
|
| Table 1. iii. c.1(2) (Percentage elongation for insulation (Core 1)) |
1000.0 |
|
| Table 1. iii. c.2 (Loss of mass test for insulation (Core 1)) |
500.0 |
|
| Table 1. iii. c.3(2) (Percentage elongation after ageing for insulation(Core 1)) |
500.0 |
|
| Table 1. iii. c.3(3) (Variation of tensile strength after ageing for insulation(Core 1)) |
- |
|
| Table 1. iii. d.3(4) (Variation in percentage elongation after ageing for sheath) |
- |
|
| Table 1. iii. c.3(4) (Variation in percentage elongation after ageing for insulation (Core 1)) |
- |
|
| - (Test on 2nd Core) |
2000.0 |
|
| - (Test on 3rd Core) |
2000.0 |
|
| - (Tests on 4th Core) |
2000.0 |
|
| Table 1. iii. c.3 (Physical tests for insulation - Ageing in air oven) |
2000.0 |
|
| Table 1. iii. e.3 , ii.g (Insulation resistance test) |
2000.0 |
|
| Table 1. iii. d.7 (Physical tests for sheath - Thermal stability) |
1000.0 |
|
| Table 1. iii.c.7 (Physical tests for insulation - Thermal stability test) |
1000.0 |
|
| Table 1 tests Sl No 1 (iii) C (4) (Shrinkage) |
500.0 |
|
| Table 1 tests Sl No 1 (iii) d (4) (Shrinkage) |
500.0 |
|
| Table 1. iii.c.5 (Physical tests for insulation - Heat shock test) |
1000.0 |
|
| Table 1. iii. d.5 (Physical tests for sheath - Heat shock Test) |
500.0 |
|
| Table 1 tests Sl No 1 (iii) C (8) (Cold bend test) |
1000.0 |
|
| Table 1 tests Sl No 1 (iii) C (9) (Cold impact test) |
1000.0 |
|
| Table 1 tests Sl No 1 (iii) d (12) (Cold bend test) |
1000.0 |
|
| Table 1 tests Sl No 1 (iii) d (13) (Cold impact test) |
1000.0 |
|
| Table 1. iii. e.4 (High voltage test (Cl. 10.2)(at room temperature)) |
1500.0 |
|
| Table 1. iii. e.1(1) (High voltage test (water immersion test)) |
3000.0 |
|
| Table 1. iii. e.4(2) (Flammability test on complete cable-Unaffected portion) |
750.0 |
|
| Table 1. iii. e.4(1) (Flammability Test on complete cable -Period of burning) |
500.0 |
|
| Table 1. iii. d.6 (Hot deformation test for sheath) |
- |
|
| Table 1. iii. c.6 (Hot deformation test for insulation(Core 1)) |
250.0 |
|
| Type Tests,Category-01. (Tests) |
20998.0 |
|
| Table 1. iii. (Type tests) |
40000.0 |
|
| Table 1. Sl No.ii (Acceptance Test) |
12000.0 |
|
| Type Tests,Category-01 including Cold Bend/Cold Impact Test (Type Tests,Category-01, including Cold Bend/Cold Impact Test) |
21000.0 |
|
| Type Tests,Category-FRLSH, including Cold Bend/Cold Impact Test (Type Tests,Category-FRLSH, including Cold Bend/Cold Impact Test) |
41000.0 |
|
| Type Tests,Category-FR, including Cold Bend/Cold Impact Test (Type Tests,Category-FR, including Cold Bend/Cold Impact Test) |
31000.0 |
|
| Test1 (Type tests) |
22000.0 |
|
| Type Tests,Category-01. (Tests) |
20998.0 |
|
| Tests (Tests) |
20000.0 |
|
| Table 1. iii. c.14 (Smoke density test for insulation (Core 1)) |
5000.0 |
|
| Table 1. iii. c.13 (Test for halogen acid gas evaluation for insulation (Core 1)) |
5000.0 |
|
| Table 1. iii. c.12 (Test temperature index for insulation(Core 1)) |
5000.0 |
|
| Table 1. iii. c.11 (The Oxygen index for insulation(Core 1)) |
5000.0 |
|
|
| 89 |
IS 16415 (2015) - Composite cement |
Composite cement |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7 (Compressive strength,72±1 h) |
1000.0 |
|
| 7 (Compressive strength,168±2 h) |
1000.0 |
|
| 7 (Compressive strength,672±4 h) |
1000.0 |
|
| 7 (Fineness) |
1000.0 |
|
| 7 (Setting time Initial) |
250.0 |
|
| 7 (Setting time,Final) |
250.0 |
|
| 7 (Soundness-Lechatlier method) |
500.0 |
|
| 7 (Soundness-autoclave method) |
1000.0 |
|
| 7 (Drying Shrinkage) |
1000.0 |
|
|
| 90 |
IS 383 (2016) & CPWD Vol. I Specifications - Specification for Coarse & Fine Aggregate |
Specification for Coarse & Fine Aggregate |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6.3 (Sieve Analysis) |
2000.0 |
|
| 5.2.1 (Deleterious Material) |
2000.0 |
|
| Organic Impurities (Organic Impurities) |
1000.0 |
|
| 4 of 2386-IV (Aggregate Impact Value) |
1500.0 |
|
| 2.1 (Aggregate Crushing Value) |
1500.0 |
|
| 5 of 2386-IV (Aggregate Abrasion Value) |
1500.0 |
|
| 4 of 2386 Part 1 (Flakiness Index, %) |
1500.0 |
|
| 5 of IS 2386-I (Elongation Index, %) |
1500.0 |
|
| 4, 5 of IS 2386 (Combined Flakiness & Elongation Indices) |
3000.0 |
|
| CPWD Specs (Silt Content) |
1000.0 |
|
| MoRTH Specs (Fineness Modulus) |
500.0 |
|
| 5.5 (Soundness) |
2000.0 |
|
| 4.0 Bulking of Sand (Bulking of Sand) |
1000.0 |
|
| 3 of 2386-IV (Fine Value) |
1500.0 |
|
| 2386 Part 3 (Moisture Content) |
1000.0 |
|
| 2386 Part 3 (Water Absorption) |
1000.0 |
|
| 4.2 (Alkali Aggregate reactivity) |
3000.0 |
|
| 2386 Part 3 (Specific Gravity) |
500.0 |
|
| 2386 Part 3 (Bulk Density) |
1000.0 |
|
|
