NTH - Management Information System

National Test House (ER), Kolkata

Block-C.P, Sector-V, Salt Lake City, Kolkata, West Bengal - 700091, Kolkata, Kolkata, West Bengal, 700091

- director-kol[at]nth[dot]gov[dot]in

Scope List

Reset

1226 Results

S.No.

Standard No.

Product

Testing Charges (Excl. Of Taxes)

871

Chemical Paint Lab NTH ER Custom Specification (2022) - Chemical Paint Lab NTH ER Custom Specification

Chemical Paint Lab NTH ER Custom Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Description)	100.0
2 (Adhesion by tape test (Cross Hatch) ASTM D-3359)	1500.0
3 (Adhesion Pull off strength ASTM D 4541)	5000.0
1 (Dry Film Thickness (as per ASTM D -7091) Non destructive Measurements)	1000.0
4 (MEK rub test (ASTM D 4752))	500.0

872

NCD 1427 Issue 1 - Specification for mineral wool marine board for thermal & acoustic insulation

Specification for mineral wool marine board for thermal & acoustic insulation

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Appendix A , Clause No 2.1 (Weight of Glass Cloth Facing)	1000.0
Appendix A , Clause No 2.2 (Thickness of Glass Cloth Facing)	1000.0
Appendix A , Clause No 2.3.1 (Warp ends/10cm)	1000.0
Appendix A , Clause No 2.3.2 (Weft ends/10cm)	1000.0
Appendix A , Clause 2.5.1 (Breaking Strength (Warp))	2000.0
Appendix A, Clause- 2.5.2 (Breaking Strength (Weft))	2000.0
Appendix A, Clause-3 (Ability to Bend)	1000.0
Appendix B, Table -B1(a) (Percent Alkalinity (As Na2O))	1000.0
Appendix B, Table -B1(b)(i) (Compression)	2000.0
Appendix B,Table (b) (ii) (Recovery)	1000.0
Appendix B ,Table-B1(C) (Puncture Resistance)	2000.0
Appendix B ,Table-B1(d) (Inter laminar Adhesion)	2000.0
Appendix B ,Table-B1(e) (Water Absorption)	2000.0
Appendix B ,Table-B1(f) (Shot Content)	2000.0
Appendix B ,Table-B1(l) (Surface Spread of Flame)	8000.0
Appendix C, 3(g) (Initial Tack Test)	2000.0
Appendix C, 3(h) (Bond Strength)	2000.0
7.0 (Thickness of Finished Boards)	1000.0
7.0 (Length of finished Boards)	500.0
7.0 (Width of Finished Boards)	500.0
8.0 (Weight of Finished Boards)	1000.0
9.0 (Freedom from Defects)	500.0

873

Custom-35-ER - False Ceiling and Accessories

False Ceiling and Accessories

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Dimension (Thickness))	1000.0
2 (Dimension (Diameter))	1000.0
3 (Dimension (length))	1000.0
4 (Mass of Zinc Coating)	2000.0
6 (Dimension (Size))	1000.0
7 (Dimension (Perforation Dia))	1000.0
8 (Dimension(Height of Tiles))	1000.0
13.2 First Characteristic Numeral 2 (Protection against solid foreign objects of 12.5 mm dia and greater,First Characteristic Numeral 2)	7500.0
14.2.3 second characteristic numeral 3 (14.2.3 second characteristic numeral 3:Protected against spraying water)	7500.0
14.2.4 Second characteristic numeral 4 (14.2.4 Second characteristic numeral 4 :Protected against splashing water)	7500.0
4.2 (Material : Messenger Conductor)	100.0
27358 (Material : Insulation)	100.0
6.3 (Weight of Phosphate Coating)	2000.0
6.11(ix) (Accelerated storage stability)	100.0
9 (Carbon)	500.0
9 (Sulphur)	500.0
9 (Phosphorus)	500.0
9 (Manganese)	1000.0
9 (Nickel)	1000.0
9 (Silicon)	1000.0
13 (Perforation Dia of Tiles)	1000.0
12 (Powder Coating Thickness of Tiles)	2000.0
11 (Size of Tiles)	1000.0
10 (Thickness of Tiles)	500.0

874

RDSO/2013/CG-01 (2023) - Non-Asbestos Based Organic Brake Pads for LHB Type Coaches Equipped with Disc Brake System on Indian Railways

Non-Asbestos Based Organic Brake Pads for LHB Type Coaches Equipped with Disc Brake System on Indian Railways

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.0 (Bending Strength)	3000.0
9.0 (Density)	1000.0
9.0 (Ash Content)	1000.0
9.0 (Acetone extract)	2000.0
9.0 (Cross braking strength)	2000.0

875

13620 (1993) - FUSION BONDED EPOXY COATED REINFORCING BARS-SPECIFICATION

FUSION BONDED EPOXY COATED REINFORCING BARS-SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A-5 (BOND STRENGTH TO CONCRETE(A-5))	15000.0
5 (Surface Preparation (Visual Examination))	1000.0
8.3 (Adhesion of Coating (Bend Test))	1000.0
4 (Tensile Strength (up to 12 mm) as per IS 1786)	-
4 (Yield/0.2% Proof Stress as per IS 1786)	1000.0
4 (Elongation Percent on gauge length of 5.65 Square Root of Cross- Sectional Area, % as per IS 1786)	1000.0
4 (Total Elongation at Maximum Force on gauge length of 5.65 Square Root of Cross- Sectional Area, % as per IS 1786)	-
4 (Tensile Strength (16 to 28 mm) as per IS 1786)	1000.0
4 (Tensile Strength (32 to 40 mm) as per IS 1786)	1500.0
4 (Bend Test as per IS 1786)	1000.0
4 (Re-bend Test (0 - 28 mm) as per IS 1786)	1000.0
4 (Re-bend Test (32 - 40 mm) as per IS 1786)	1500.0
4 (Mass per metre run as per IS 1786)	1000.0
4 (TS/ YS Ratio as per IS 1786)	-
4 (Carbon, % by mass as per IS 1786)	500.0
4 (Sulphur, % by mass as per IS 1786)	500.0
4 (Phosphorus, % by mass as per IS 1786)	500.0
4 (Sulphur+ Phosphorus, % by mass as per IS 1786)	500.0
4 (Carbon Equivalent (CE), % by mass as per IS 1786)	2000.0
7.2 (Continuity of Coating (Visual only))	1000.0
7.1 (Coating Thickness)	2000.0

876

13620 (upto 12mm) (1993) - FUSION BONDED EPOXY COATED REINFORCING BARS-SPECIFICATION (Upto 12mm)

FUSION BONDED EPOXY COATED REINFORCING BARS-SPECIFICATION (Upto 12mm)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A-5 (BOND STRENGTH TO CONCRETE (IS 13620:1993))	10000.0

877

SLS 1126.1-2020 - Specification for Lead-Acid Starter Batteries[ Part 1: General Requirements & Method of Test]

Specification for Lead-Acid Starter Batteries[ Part 1: General Requirements & Method of Test]

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.1 (1st 20 h capacity Test)	25000.0
9.2 (1st Reserve Capacity Test)	20000.0
9.4 (Charge Acceptance Test)	15000.0
9.5 (charge retention test)	20000.0
9.6.1.1 (Corrosion Test)	15000.0
9.6.2 (Endurance in cycle test)	45000.0
9.7 (Water consumption Test)	15000.0
9.8 (Vibration Resistance Test)	15000.0
9.9 (Electrolyte Retention Test)	10000.0
8.4.2,9.10 (Cranking performance for dry charge batteries)	15000.0
9.6.1.2 (Endurance in cycle test)	55000.0
9.1 (2nd 20 h capacity Test)	25000.0
9.1 (3rd 20 h capacity Test)	25000.0
9.2 (2nd Reserve Capacity Test)	20000.0
9.2 (3rd Reserve Capacity Test)	20000.0
9.3.1 (2nd cranking performance test)	20000.0
9.3.1 (3rd cranking performance test)	20000.0

878

8623-1:(1993) - Low-Voltage Switchgear and Control gear Assemblies, Part 1: Requirements for Type-Tested and Partially Type-Tested Assemblies [ETD 7: Low Voltage Switchgear and Control gear]

Low-Voltage Switchgear and Control gear Assemblies, Part 1: Requirements for Type-Tested and Partially Type-Tested Assemblies [ETD 7: Low Voltage Switchgear and Control gear]

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.2.2 (Verification of dielectric properties)	10000.0
8.3.4 (Verification of insulation resistance)	10000.0
8.2.1.3 (Tempreture rise test)	20000.0

879

JIS D 5301:2006 - Lead Acid starter Batteries

Lead Acid starter Batteries

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.5.2 (5 h rate capacity)	20000.0
Annexure 1 Clause 2 (Water consumption test)	10000.0
10.1 (20 h rate capacity (C20) test)	25000.0
10.2 (Reserve capacity test)	20000.0
10.3 (Cold cranking ampere test)	15000.0
10.4 (Charge acceptance test)	10000.0
10.5(a) (Light load endurance test)	25000.0
10.5(b) (Heavy load endurance test)	25000.0
10.6 (Vibration resistance)	10000.0
10.7 (Terminal strength test)	5000.0
10.8 (Fastening robustness test)	5000.0
10.9 (Electrolyte retention test)	20000.0
10.10 (Charge retention test)	15000.0
Annex A, Table A.2 (Dimension)	5000.0

880

GE: IRS -2 (Final) (2005) - SPECIFICATION FOR MECHANICALLY PRODUCED BLANKETING MATERIAL FOR RAILWAY FORMATIONS INCLUDING GUIDELINES FOR LAYING

SPECIFICATION FOR MECHANICALLY PRODUCED BLANKETING MATERIAL FOR RAILWAY FORMATIONS INCLUDING GUIDELINES FOR LAYING

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1.C.1 (Test for Non Plastic fines(Particles of size less than 75 micron)(as per GE: IRS -2 (Final)))	1000.0
4.1.C.2 (Test for Plastic fines(GE: IRS -2 (Final)))	1000.0
4.1.d (Test for Particle size distribution(GE: IRS -2 (Final)))	5000.0
4.1.e.1 (Test for Uniformity Co-efficient (Cu) {GE: IRS -2 (Final)})	1500.0
4.1.e.2 (Test for Co-efficient of Curvature(CC) (GE: IRS -2 (Final)))	1500.0
Nil (Liquid Limit (IS 2720(5)-1985))	1000.0
- (Plastic limit (IS 2720(5):1985))	1000.0
- (Free soil Index(IS 2720(40)1977))	1000.0
- (Shrinkage limit (IS 2720(6)1985))	1000.0
- (DETERMINATION OF WATER CONTENT-DRY DENSITY RELATION (IS 2720(8):1983) (Proctor test))	5000.0
- (Test for Aggregate Abrasion Value (Los Angeles) as per IS 2386 (Part 4): 1963)	1500.0

881

customer specification ER CHEMICAL METAL LAB (2022) - customer specification ER CHEMICAL METAL LAB

customer specification ER CHEMICAL METAL LAB

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Zinc (as Zn),% by mass)	2000.0
2 (Aluminum as Al % by mass)	2000.0

882

RDSO/PE/SPEC/AC/0059-2004(Rev.O),Amendment No-01 (2004) - V-Belts used For Driving Alternators For TL and AC Coaches

V-Belts used For Driving Alternators For TL and AC Coaches

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.0 (Pitch length)	5000.0
7.0 (Coding)	1000.0
3.1 (Construction)	2000.0
3.2(i) (Hardness(IRHD))	1000.0
3.2(ii) (Tensile Strength of base material)	2000.0
3.2(iii) (Elongation at break of base material)	1000.0
3.3(i) (Elongation of Finished Belt)	1000.0
3.3(ii) (Reference Elongation at 300 kgf of Finished Belt)	1000.0
3.3(iii) (Breaking Strength)	2000.0
5.1(i) (Nominal Top width)	1000.0
5.1(ii) (Nominal Thickness)	1000.0
5.1(iii) (Angle)	1000.0
12.7(i) (Change in Hardness after ageing)	1000.0
12.7(ii) (Change in Tensile Strength after ageing)	2000.0
12.7(iii) (Change in elongation after ageing)	1000.0
12.7(iv) (Compression set)	1000.0

883

IS 542 (2018) - Coconut oil - Specification (Third Revision)

Coconut oil - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2.1 (Clarity)	500.0
5.7 (i) (moisture and insoluble impurities)	500.0
5.7(ii) (colour in lovibond scale)	500.0
5.7(iii) (Refractive index 40 dg)	500.0
5.7(iv) (Specific gravity 30 dg)	500.0
5.7 (v) (saponification value)	500.0
5.7(vi) (Iodine value)	500.0
5.7 (vii) (Acid value)	500.0
5.7(viii) (Unsaponifiable matter)	500.0
5.7 (ix) (Polenske value)	500.0
5.3 (Test for presence of Karanja oil)	500.0
5.3 (Test for presence of Kusum oil and other oils containing cyanogenic compounds)	500.0
5.3 (Test for presence of Castor oil)	500.0
5.3 (Test for presence of Hydrocyanic acid)	500.0
5.3 (Test for presence of Argemone oil)	500.0
5.3 (Test for presence of mineral oil)	500.0
5.3 (Test for presence of neem oil)	500.0

884

IS 4351 (2003) - STEEL DOOR FRAMES — SPECIFICATION

STEEL DOOR FRAMES — SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Dimensions)	2000.0

885

Custom Paper Test (2022) - Method of Test for Paper on the lines of IS 1060

Method of Test for Paper on the lines of IS 1060

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Tests)	2000.0

886

IS 2214 : 1977 (1977) - Specification for Silver Nitrate , Pure and analytical Reagent

Specification for Silver Nitrate , Pure and analytical Reagent

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.2 (Silver Nitrate ( AgNO3) Percent/Mass)	2000.0

887

IS 15489 : 2013 NTH ER (2013) - PAINT, PLASTIC EMULSION — SPECIFICATION

PAINT, PLASTIC EMULSION — SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Composition)	700.0
6.2 (Conditions in the Container)	600.0
6.3 (Thinning)	600.0
6.4 (Application Properties)	600.0
6.5 (Mass in kg/10 litre)	700.0
6.6 (Opacity)	700.0
6.7 (Fastness to Light (Xenon Arc apparatus for 500 hrs))	25000.0
6.8 .1.1 (C-2 Durability Test (Normal Outdoor Exposure Test 12 Months ) for Exterior Use Only)	10000.0
6.8 1.2 &6.8.2 (C-3 Durability Test ACCELERATED WEATHERING TEST Accelerated Weathering Apparatus QUV for 21 days UV condensation type)	18000.0
6.9 (Lead Restriction)	700.0
6.10 (Keeping Properties (For 12 months))	5000.0
6.11 (i) Table 1 (Consistency)	700.0
6.11(ii) Table 1 (Drying time, a) Surface Dry)	400.0
6.11(ii) Table 1 (Drying time b) Hard dry)	400.0
6.11 (iii) Table 1 (Finish)	700.0
6.11 (iv) (Gloss at 60 Deg. Angle)	700.0
6.11(v) Table 1 (Colour)	300.0
6.11(vii) Table 1 (Resistance to alkali)	700.0
6.11 (viii) Table 1 (Washability and cleanability)	700.0
6.11 (x) Table 1 (Recoating properties)	200.0
6.12.2 Specific requirements VOC (Volatile Organic Compounds (VOC) % by mass)	2400.0
6.12 .2 Toxic metals (toxic metals such as lead, cadmium, chomium (VI) and their compounds)	2400.0
3.1.1 (Volatile Organic Compound (gm/litre))	3000.0

888

IS 4277 (2014) - Sunflower oil - Specification (Second Revision)

Sunflower oil - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.7(i) (moisture and insoluble impurities)	500.0
5.7.(ii) (colour in lovibond scale)	500.0
5.7(iii) (Refractive index 40 dg)	500.0
5.7(iv) (saponification value)	500.0
5.7(v) (Iodine value)	500.0
5.7(vi) (Acid value)	500.0
5.7(vii) (Unsaponifiable matter)	500.0
5.2 (Peroxide value)	500.0
5.8.1.3 (Limits for toxic metals, Lead)	500.0
5.8.1.3 (Limits for toxic metals, Arsenic)	500.0
5.8.1.3 (Limits for toxic metals, Cadmium)	500.0
5.8.1.3 (Limits for toxic metals, Mercury)	500.0
5.3 (Test for presence of neem oil)	500.0
5.3 (Test for presence of Castor oil)	500.0
5.3 (Test for presence of Kusum oil and other oils containing cyanogenic compounds)	500.0
5.3 (Test for presence of mineral oil)	500.0
5.3 (Test for presence of Hydrocyanic acid)	500.0
5.3 (Test for presence of Argemone oil)	500.0
5.3 (Test for presence of Karanja oil)	500.0
5.2 (freedom from adulterants, sediments, suspended particles,foreign matter etc)	500.0

889

NTH/NR/RPPT/Rubber & Rubber Products (2025) - Rubber Sheets and Rubber Products

Rubber Sheets and Rubber Products

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 3400 (Part 1) (Tensile Strength)	2000.0
IS 3400 (Part 1) (Elongation at Break)	1000.0
IS 3400 (Part 1) (Tensile strength after heat aging)	3000.0
IS 3400 (Part 9) (Density)	1000.0
IS 3400 Part-3, Method -A (ISO 4649) (Abrasion Loss)	3000.0
9.2 of IS 1891 Part-5 (Flame Test)	4000.0
Firm's request (Hardness (Shore A))	1000.0
Firm's request. (Water Immersion Test(Change in Weight))	2000.0
Firm's request. (Compression Set)	3000.0
Firm's request. (Compression Load Test at 125 Ton)	5000.0
Firm's request. (Hardness After Ageing(Shore A))	2000.0
Firm's request. (Elongation at break(After Ageing))	1000.0
Firm's request (Ash Content(%))	2000.0
Firm's request (Effect of Liquid Resistance in 33% HCL for 72 hrs at room temp)	2000.0
Firm's request (Dimensions)	1000.0
Firm's request (Dimension for Yellow Colour)	1000.0
Firm's request (Dimension for Black Colour)	1000.0
Firm's request (Hardness-IRHD)	1000.0
Firm's request (Compression Load Test at 125 Ton for Yellow colour)	5000.0
Firm's request (Compression Load Test at 125 Ton for Black colour)	5000.0
Firm's request (Load Test)	2000.0

890

Dynamometer (4000kg) - Calibration of Dynamometer (4000kg)

Calibration of Dynamometer (4000kg)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Force)	15000.0

891

Dynamometer (3000kg) - Calibration of Dynamometer (3000kg)

Calibration of Dynamometer (3000kg)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Force)	15000.0

892

ANSI/UL 94-2015 (2015) - Standard for Safety Tests for Flammability of Plastic Materials for Parts in Devices and Appliances

Standard for Safety Tests for Flammability of Plastic Materials for Parts in Devices and Appliances

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table 8.1 (After flame time for each individual specimen)	1500.0
Table 8.1 (Total after flame time for any condition set (For five specimen))	1500.0
Table 8.1 (After flame plus afterglow time for each individual specimen)	1500.0
Table 8.1 (After flame or afterglow for any specimen upto the holding clamp)	1500.0
Table 8.1 (Cotton indicator ignited by flaming particle or drops)	1500.0

893

ISO 4624 (2016) - Paints and varnishes — Pull-off test for adhesion

Paints and varnishes — Pull-off test for adhesion

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (Pull Off Test)	5000.0

894

IS 15658 (2021) - Concrete Paving Blocks - Specification ( First Revision )

Concrete Paving Blocks - Specification ( First Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.3, Table 3, Sl No (iii) (Abrasion Resistance-(Dry condition)-IS 15658:2021, Annex E)	4000.0
7.3, , Table 3, Sl No (v) (Flexural strength-IS 15658:2021, Annex G)	4000.0
7.3, Table 3, Sl No (i) (Water Absorption-IS 15658:2021, Annex C)	1000.0
7.3, Table 3, Sl No (ii) (Compressive Strength-IS 15658:2021, Annex D)	4000.0
7.2, Table2 (Dimensions & Tolerances-IS 15658:2021, Annex B)	3000.0
7.1 (General quality & Finish-IS 15658:2021)	1000.0
7.3, Table 3, Sl No (iii) (Abrasion Resistance-(Wet condition)-IS 15658:2021, Annex E)	4000.0
7.3, Table 3, Sl No (iv) (Tensile Splitting Strength-IS 15658:2021, Annex F)	4000.0
3.2 (Thickness (Average Value), mm)	1000.0

895

NTHER Calibration of noncontact type temperature indicator - Calibration of noncontact type temperature indicator

Calibration of noncontact type temperature indicator

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (Temperature)	1000.0
A.2 (Temperature)	1500.0
A.3 (Temperature)	2000.0
A.4 (Temperature)	2500.0

896

NTHER Calibration of Insulation Tester - Calibration of Insulation Tester

Calibration of Insulation Tester

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (Insulation Resistance - Voltage Range-100V)	1000.0
A.2 (Insulation Resistance - Voltage Range-500V)	1200.0
A.3 (Insulation Resistance - Voltage Range-1000V)	1500.0
A.4 (Insulation Resistance - Voltage Range-2500V)	2000.0
A.5 (Insulation Resistance - Voltage Range-5000V)	2500.0

897

NTHER Calibration of Power Factor meter - Calibration of Power Factor meter

Calibration of Power Factor meter

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (Power Factor (pf))	1200.0

898

NTHER Calibration of frequency meter - Calibration of frequency

Calibration of frequency

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (Frequency up to 1kHz)	1000.0
A.2 (Frequency up to 1MHz)	1500.0
A.3 (Frequency up to 100 MHz)	2000.0
A.4 (Frequency up to 300 MHz)	2500.0
A.5 (Frequency up to 3 GHz)	3500.0

899

NTHER Calibration of decade Resistance - Calibration of decade Resistance

Calibration of decade Resistance

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (Resistance up to 1GigaOhm)	2500.0
A.2 (Resistance up to 20 Giga Ohm)	3500.0
A.3 (Resistance up to 1 Tera Ohm)	4500.0

900

NTHER -Calibration of Standard dc Resistance (Fixed point) - dc Resistance

dc Resistance

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A.1 (dc Resistance)	2000.0
A.2 (dc Resistance)	1200.0
A.3 (ac Resistance)	3000.0