NTH - Management Information System

National Test House (NWR), Jaipur

E-763, Road No. 9 F1 V.K.I.A Jaipur-302013, Rajasthan, Jaipur, Jaipur, Rajasthan, 302013

9717298334 nthjaipur-ca@nic.in

Scope List

Reset

297 Results

S.No.

Standard No.

Product

Testing Charges (Excl. Of Taxes)

241

IS 14543 (2024) - Packaged Drinking Water (other than Packaged Natural Mineral Water) - Specification

Packaged Drinking Water (other than Packaged Natural Mineral Water) - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.4.1 (Annex D) (Alpha-Endosulfan)	5000.0
5.4.1 (Annex D) (Beta-Endosulfan)	5000.0
5.4.1 (Annex D) (Endosulfan sulphate)	5000.0
5.4.1 (Annex D) (Malaxon)	5000.0
5.4.1 (Annex D) (Malathion)	5000.0
5.4.1 (Annex D) (Paraxon methyl)	5000.0
5.4.1 (Annex D) (o, p-DDE)	5000.0
5.4.1 (Annex D) (o, p-DDT)	5000.0
5.4.1 (Annex D) (p, p-DDE)	5000.0
5.4.1 (Annex D) (p, p-DDT)	5000.0
5.4.1 (Annex D) (Phorate)	5000.0
5.4.1 (Annex D) (Phorate sulfone)	5000.0
5.4.1 (Annex D) (Phorate sulfoxide)	5000.0
5.4.1 (Annex D) (2,4-D)	5000.0
5.4.1 (Annex D) (Alachlor)	5000.0
5.4.1 (Annex D) (Aldrin)	5000.0
5.4.1 (Annex D) (Αlpha-HCH)	5000.0
5.4.1 (Annex D) (Atrazine)	5000.0
5.4.1 (Annex D) (Βeta-HCH)	5000.0
5.4.1 (Annex D) (Butachlor)	5000.0
5.4.1 (Annex D) (Chloropyrifos)	5000.0
5.4.1 (Annex D) (Delta-HCH)	5000.0
5.4.1 (Annex D) (Dieldrin)	5000.0
5.4.1 (Annex D) (Ethion)	5000.0
5.4.1 (Annex D) (Gamma-HCH)	5000.0
5.4.1 (Annex D) (Isoproturon)	5000.0
5.4.1 (Annex D) (Methyl parathion)	5000.0
5.4.1 (Annex D) (Monocrotophos)	5000.0
5.4.1 (Annex D) (o, p-DDD)	5000.0
5.4.1 (Annex D) (p, p-DDD)	5000.0
5.3 (Polychlorinated biphenyls (PCB))	2000.0
5.3 (Polynuclear aromatic hydrocarbons (PAH))	2000.0
5.4 (Total pesticide residue)	5000.0
5.3 (Bromate (as BrO3))	1200.0
5.3 (Alkalinity (as HCO3))	1000.0
5.3 (Aluminium (as Al))	1000.0
5.3 (Anionic Surface active agents (as MBAS))	1200.0
5.3 (Antimony (as Sb))	1000.0
5.3 (Arsenic (as As))	2000.0
5.3 (Barium (as Ba))	1000.0
5.3 (Borates (as B))	1000.0
5.3 (Cadmium (as Cd))	1000.0
5.3 (Calcium (as Ca))	1000.0
5.3 (Chloride (as Cl))	1000.0
5.3 (Chromium (as Cr))	1000.0
5.3 (Colour, true colour units)	1200.0
5.3 (Copper (as Cu))	1200.0
5.3 (Cyanide (as CN))	2000.0
5.3 (Iron (as Fe))	1200.0
5.3 (Lead (as Pb))	1000.0
5.3 (Magnesium (as Mg))	1000.0
5.3 (Manganese (as Mn))	1200.0
5.3 (Mercury (as Hg))	2000.0
5.3 (Mineral oil)	1000.0
5.3 (Nickel (as Ni))	1000.0
5.3 (Nitrate (as NO3))	1000.0
5.3 (Nitrite (as NO2))	1000.0
5.3 (Odour)	1000.0
5.3 (pH)	1000.0
5.3 (Phenolic compounds (as C6H5OH))	1000.0
5.3 (Residual free chlorine)	1000.0
5.3 (Selenium (as Se))	1000.0
5.3 (Silver (as Ag))	1000.0
5.3 (Sodium (as Na))	1000.0
5.3 (Sulphate (as SO4))	1200.0
5.3 (Sulphide (as H2S))	1000.0
5.3 (Taste)	1000.0
5.3 (Total dissolved solids)	1000.0
5.3 (Zinc (as Zn))	1000.0
5.3 (Fluoride (as F))	1000.0
5.3 (Turbidity)	1000.0
5.2.1 (Escherichia coli)	1200.0
5.2.2 (Coliform)	1200.0
5.2.4 (Sulphite reducing Anaerobes)	1200.0
5.2.5 (Pseudomonas aeruginosa)	1200.0
5.2.6 (Aerobic microbial count/ ml at 20-22 °C in 72 hours)	1200.0
5.2.6 (Aerobic microbial count/ ml at 37° ± 1° C in 24 hours)	1200.0
5.2.7 (Yeast & Mould)	1200.0
5.2.8 (Salmonella)	1200.0
5.2.8 (Shigella)	1200.0
5.2.9 (Vibrio cholerae)	1200.0
5.2.9 (Vibrio parahaemolyticus)	1200.0
5.2.3 (Faecal Streptococci)	1200.0
5.2.3 (Staphylococcus aureus)	1200.0

242

IS 6012 (1992) - Measurement of coating thickness by eddy current method (First Revision)

Measurement of coating thickness by eddy current method (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 6012 (Coating thickness)	2000.0
IS 6012 (Coating thickness)	2000.0

243

IS 15658 (2021) - Concrete Paving Blocks - Specification ( First Revision )

Concrete Paving Blocks - Specification ( First Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.3, Table 3, Sl No (i) (Water Absorption-IS 15658:2021, Annex C)	1000.0
7.3, Table 3, Sl No (ii) (Compressive Strength-IS 15658:2021, Annex D)	4000.0
7.1 (General quality & Finish-IS 15658:2021)	1000.0
7.3, Table 3, Sl No (iv) (Tensile Splitting Strength-IS 15658:2021, Annex F)	4000.0
7.3, , Table 3, Sl No (v) (Flexural strength-IS 15658:2021, Annex G)	4000.0
7.3, Table 3, Sl No (iii) (Abrasion Resistance-(Wet condition)-IS 15658:2021, Annex E)	4000.0
7.3, Table 3, Sl No (iii) (Abrasion Resistance-(Dry condition)-IS 15658:2021, Annex E)	4000.0
7.2, Table2 (Dimensions & Tolerances-IS 15658:2021, Annex B)	3000.0

244

IS 15622 (2017) - Pressed Ceramic Tiles - Specification (First Revision)

Pressed Ceramic Tiles - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6, Tables 5 to 9, Sl No (ii), (a) (Water Absorption-IS13630 (Part 2):2019)	1000.0
6, Tables 5 to 9, Sl No (ii), (b) (Modulus of rupture in N/mm²- IS13630 (Part6):2019)	2000.0
6, Tables 5 to 9, Sl No (ii), (d) (Moisture expansion in mm/m-IS13630 (Part 3):2019)	1000.0
6, Tables 5 to 9, Sl No (ii), (e) (Scratch Hardness of surface (Mohs' Scale)-IS13630 (Part 13):2019)	2000.0
6, Tables 5 to 9, Sl No (ii), (g) (Coefficient of Linear thermal expansion from ambient temperature to 100° C(K raise to -1)-IS 13630 (Part 4):2019)	1000.0
6, Tables 5 to 9, Sl No (ii), (j) (Crazing Resistance- IS13630 (Part 9):2019)	1500.0
6, Tables 5 to 9, Sl No (ii), (k) (Impact resistance-Coefficient of Restitution-IS13630 (Part 14):2019)	1000.0
6, Tables 8 and 9, Sl No (ii), (q) (Bulk Density-IS13630 (Part 2):2019)	1000.0
6, Tables 5 to 9, Sl No (i), (b) (Dimension-Thickness-Deviation in percent from work size -IS: 13630 (Part1):2019)	1000.0
6, Tables 5 to 9, Sl No (i), (a) (Dimensions-Length-IS13630 (Part1):2019)	1000.0
6, Tables 5 to 9, Sl No (i), (a) (Dimensions-Width -IS:13630 (Part1):2019)	1000.0
6, Tables 5 to 9, Sl No (i), (f) (Surface Quality-IS13630 (Part1):2019)	500.0
6, Tables 5 to 9, Sl No (i), (d) (Rectangularity-Maximum deviation in percent to corresponding work size-IS: 13630 (Part1):2019)	500.0
6, Tables 5 to 9, Sl No (i), (c) (Straightness of sides(Facial sides)Maximum deviation in percent to corresponding work size- IS13630 (Part1):2019)	500.0
6, Tables 5 to 9, Sl No (i), (e-1,2,3) (Surface Flatness-Maximum deviation in percent from flatness-(Centre curvature, Edge curvature & warpage) -IS: 13630 (Part1):2019)	500.0
6, Table 9, Sl No (iii), (a, b, c)-1(Part 8) (Chemical properties-glazed- IS13630 (Part 8):2019)	5000.0
6, Tables 5 to 9, Sl No (ii), (c) (Breaking of strength in N- IS13630 (Part 6):2019)	2000.0

245

IS 14587 (1998) - Prelaminated Medium Density Fibre Board -specification

Prelaminated Medium Density Fibre Board -specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.3 (Moisture Content-IS 2380 (Part 3):1977)	1000.0
10.2, Table 1, Sl No 1.1 (Density-IS 2380 (Part 3):1977)	500.0
10.4, Table 1, Sl No 1.2 (Water Absorption-IS 2380 (Part 16):1977)	1000.0
10.5,Table 1, Sl No 1.3 (Thickness swelling-IS 2380 (Part 17):1977)	1500.0
10.7, Table 1, Sl No 1.6 (Tensile strength perpendicular to surface-IS 2380 (Part 5):1977)	2000.0
10. 8, Table 1, Sl No 1.7 (Tensile strength perpendicular to surface after ageing-IS 14587:1998 & -IS 2380 (Part 5):1977)	2000.0
10.10, Table 1, Sl No 1.9 (Resistance to Surface Abrasion-IS 14587:1998 Annex B)	5000.0
10.11 (Resistance to Steam-IS 14587:1998 Annex C)	500.0
10.12 (Resistance to Crack-IS 14587:1998 Annex D)	500.0
10.13 (Resistance to Cigarette Burn-IS 14587:1998 Annex E)	500.0
10.14 (Resistance to Stain-IS 14587:1998 Annex F)	1500.0
8 (Dimension & Tolerances-IS 12406)	500.0
10.6, Table 1, Sl No 1.4 & 1.5 (Modulus of Rupture and Modulus of Elasticity-IS 2380 (Part 4):1977)	2500.0
10. 9, Table 1, Sl No 1.8 (Screw Withdrawal Test -IS 2380 (Part 14):1977)	1500.0

246

IS 14223 : Part 1 (1995) - Polished Building Stones: Part 1 Granite

Polished Building Stones: Part 1 Granite

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Moisture content)	500.0
5 (Dry density )	1000.0
5 (Specific gravity)	1000.0
5 (Water absorption)	1000.0
5 (Porosity)	1000.0
5 (Compressive strength)	2000.0
5 (Hardness)	2000.0
5 (Resistance to wear)	4000.0
4 (Dimensions)	500.0

247

IS 1237 (2012) - Cement Concrete Flooring Tiles - Specification

Cement Concrete Flooring Tiles - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12.5 (Water Absorption-Annex E of IS 1237:2012)	1000.0
10 (General Quality-IS 1237:2012)	100.0
12.6 (Wet transverse strength-Annex F of IS 1237:2012)	2000.0
8.3 & Table2 (The thickness of Wearing Layer-IS 1237:2012)	100.0
12.2 (Flatness-Annex B of IS 1237:2012)	500.0
12.4 (Straightness-Annex D of IS 1237:2012)	500.0
12.3 (Perpendicularity-Annex C of IS 1237:2012)	500.0
7 & 8.1, Table1 (Dimensions & Tolerances-IS 1237:2012)	200.0
7, 8.2 & Table1 (Thickness & Tolerances-IS 1237:2012)	100.0

248

IS 12894 (2002) - Pulverized fuel ash - Lime bricks - Specification

Pulverized fuel ash - Lime bricks - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.4 (Water Absorption)	1000.0
7.3 (Efforescence)	1000.0
3 (General quality)	500.0
7.1 (Crushing Strength)	2000.0
5 (Dimensions)	500.0
7.2 (Drying Shrinkage)	2000.0

249

IS 12823 (2015) - Wood Products - Prelaminated Particle Boards -Specification

Wood Products - Prelaminated Particle Boards -Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.3 (Moisture Content-IS 2380 (Part 3):1977)	1000.0
8 (Dimension & Tolerances-IS 12823:2015 Annex B)	500.0
10.2, Table 2, Sl No (i) & (ii) (Density-IS 2380 (Part 3):1977)	500.0
10.4 Table 2, Sl No (iii) (Water Absorption-IS 2380 (Part 16):1977)	1000.0
10.5 Table 2, Sl No (iv) (Swelling in Water-IS 2380 (Part 17):1977)	1000.0
10.6Table 2, Sl No (v) (Modulus of Rupture & Modulus of Elasticity-IS 2380 (Part 4):1977)	2500.0
10.7 Table 2, Sl No (vi) (Tensile strength perpendicular to surface-IS 2380 (Part 5):1977)	2000.0
10.8, Table 2, Sl No (vii) (Tensile strength perpendicular to surface after ageing-IS 12823:2015 &-IS 2380 (Part 5):1977)	2000.0
10.9, Table 2, Sl No (viii) (Screw Withdrawal Strength -IS 2380 (Part 14):1977)	1500.0
10.10 Table 2, Sl No (ix) (Abrasion Resistance-IS 12823:2015 Annex C)	5000.0
10.11 (Resistance to Steam-IS 12823:2015 Annex D)	500.0
10.12 (Resistance to Crack-IS 12823:2015 Annex E)	500.0
10.13 (Resistance to Cigarette Burn-IS 12823:2015 Annex F)	500.0
10.14 (Resistance to Stain-IS 12823:2015 Annex G)	1500.0

250

IS 12406 (2021) - Medium density fibre boards for general purpose - Specification (First Revision)

Medium density fibre boards for general purpose - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9, Table 3 and 4, Table 3 & 4, Sl. No. (iii) & (iv) (Moisture Content-IS 2380 (Part 3): 1977)	1000.0
8, Table 2 (Dimension & Tolerances-IS 12406:2021, Annex A)	500.0
9, Table 3 and 4, Table 3 & 4, Sl. No. (iii) & (iv) (Moisture Content-IS 2380 (Part 3): 1977)	1000.0
9, Table 3 & 4, Sl. No. (i) & (ii) (Density-IS 2380 (Part 3): 1977)	500.0
9, Table 3 and 4, Sl No (xi) (Formaldehyde content-IS 13745:1993.)	3000.0
9, Table 3 and 4, Sl. No. (v) (Linear Expansion (thickness swelling of water) due to general absorption after 24 hr soaking -IS 2380 (Part17): 1977)	1000.0
9, Table 3 and 4, Sl No (ix) (Modulus of Elasticity-IS 2380 (Part 4): 1977)	2000.0
9, Table 3 and 4, Sl No (viii) (Modulus of Rupture -IS 2380 (Part 4): 1977)	2500.0
9, Table 3 and 4, Sl No (vi) (Internal Bond Strength-IS 2380 (Part 5): 1977)	2000.0
9, Table 3 and 4, Sl No (vii) (Internal Bond strength after cyclic/accelerated water resistance test-IS 12406:2021 & IS 2380 (Part 5): 1977)	2000.0
9, Table 3 and 4, Sl No (x) (Screw Withdrawal Strength-IS 2380 (Part 14): 1977)	1500.0

251

IS 10262 (2019) - Concrete Mix Proportioning — Guidelines ( Second Revision )

Concrete Mix Proportioning — Guidelines ( Second Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Concrete Mix Design (IS 10262:2019))	35000.0

252

IS 8419 : Part 1 (1977) - Requirements for filtration equipment: Part 1 filtration media - Sand and gravel

Requirements for filtration equipment: Part 1 filtration media - Sand and gravel

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1.2 (Percentage of volume of sand (clay, slit, loam etc.))	1000.0
3.1.4 (Loss on Ignition)	1000.0
3.1.1 (Silica)	1000.0
3.1.3 (Acid Soluble Matter)	1000.0

253

IS 4990 (2011) - Plywood for concrete shuttering works - Specification (Third Revision)

Plywood for concrete shuttering works - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.1.1 (Moisture content-IS 4990:2011 & IS 1734 (Part 1):1983)	1000.0
8 (Workmanship & Finish- IS 4990:2011,)	1000.0
7 (Dimension and Tolerances- IS 4990:2011, Annex C)	1000.0
10.1.2.1 (Glue Shear Strength in dry state-IS 1734 (Part 4):1983)	2000.0
10.1.2.2 (Adhesion of Plies in dry state-IS 1734 (Part 5):1983)	1000.0
10.1.3.1.1 (Glue Shear Strength, after Water Resistance-IS 4990:2011 & IS 1734 (Part 4):1983)	2000.0
10.1.3.1.2 (Glue Adhesion, after, after water resistance-IS 4990:2011 & IS 1734 (Part 5):1983)	500.0
10.1.5.1 (Glue Shear Strength, after Mycological Test-IS 1734 (Part 7):1983 & IS 1734 (Part 4):1983)	2000.0
10.1.5.2 (Glue Adhesion, after Mycological Test-IS 1734 (Part 7):1983 & IS 1734 (Part 5):1983 -)	500.0
10.1.5.1 (Glue Shear Strength, after Mycological Test-IS 1734 (Part 7):1983 & IS 1734 (Part 4):1983)	2000.0
10.1.6 (Tensile Strength-IS 1734 (Part 9):1983)	2500.0
10.1.7, Table 2 (Static Bending Strength-IS 1734 (Part 11):1983)	2000.0
10.1.8, Table 3 (Wet Bending Strength--IS 4990:2011 & IS 1734 (Part 11):1983)	2000.0

254

IS 4457 (2007) - Ceramic unglazed vitreous acid resisting tiles - Specification (Second Revision)

Ceramic unglazed vitreous acid resisting tiles - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Water Absorption)	1000.0
2 ( Surface Quality)	500.0
3 (Dimension-Length)	1000.0
4 (Abrasion resistance)	2500.0
4 (Modulus of rupture)	2000.0
4 (Warpage)	1000.0
4 (Breaking Strength)	2000.0

255

IS 3466 (1988) - Specification For Masonry Cement

Specification For Masonry Cement

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3 (Fineness)	1000.0
3 (Compressive strength,7 days)	1250.0
3 (Compressive strength,28 days)	1250.0
3 (Soundness-Lechatlier method)	500.0
3 (Soundness-autoclave method)	1000.0
3 (Setting time Initial)	250.0
3 (Setting time,Final)	250.0
3 (Fineness)	1000.0

256

IS 3316 (1974) - Structural Granite

Structural Granite

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.3 (Water Absorption)	1000.0
3.2 (Specific Gravity)	1000.0
3.1 (Compressive Strength)	2000.0

257

IS 3097 (2006) - Veneered Particle Boards -Specification

Veneered Particle Boards -Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Dimensions and Tolerances-IS 3097:2006, Annex C)	500.0
9.1 a (Density-IS 2380 (Part 3):1977)	500.0
9.1 b (Moisture Content-IS 2380 (Part 3):1977)	1000.0
9.1 c (Water Absorption-IS 2380 (Part 16):1977)	1000.0
9.1 d (Water Resistance Test--IS 3097:2006)	1000.0
9.1 e (Swelling in Water-IS 2380 (Part 17):1977)	2000.0
9.1 f (Adhesion of Plies-IS 3097:2006)	500.0
9.1 g (Modulus of Rupture and Modulus of Elasticity-IS 2380 (Part 4):1977)	2500.0

258

IS 3087 (2005) - Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes -Specification

Practicle boards of wood and other lingnocellulosic materials (medium density) for general purposes -Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 and 11.2 (Dimensions and Tolerances-IS 2380 (Part 2):1977)	500.0
9.1 & 11.3, Table 1, Sl No.(i) (Density-IS 2380 (Part 3):1977)	500.0
9.2 & 11.4 (Moisture content-IS 2380 (Part 3):1977)	1000.0
9.3 & 11.5, Table 1, Sl No.(ii) (Water Absorption-IS 2380 (Part 16):1977)	1000.0
9.4 & 11.6, Table 1, Sl No.(iii) & (iv) (Swelling in water-IS 2380 (Part 17):1977)	1500.0
9.5 & 11.7Table 1, Sl No.(v) , (Swelling due to surface absorption-IS 2380 (Part 17):1977)	2000.0
11.8, Table 1, Sl No.(vi) & (vii) (Modulus of Rupture and Modulus of Elasticity-IS 2380 (Part 4):1977)	2500.0
11.9, Table 1, Sl No.(viii) (Tensile strength perpendicular to surface-IS 2380 (Part 5):1977)	2000.0
11.9.1, Table 1, Sl No.(ix), a & b (Tensile strength perpendicular to surface after cyclic/accelerated water resistance test-IS 2380 (Part 5):1977)	2000.0
11.10, Table 1, Sl No.(x) (Screw Withdrawal Strength-IS 2380 (Part 14):1977)	1500.0

259

IS 2691 (2017) - Burnt Clay Facing Bricks - Specification (Third Revision)

Burnt Clay Facing Bricks - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.3 (Efflorescence IS 3495(2))	1000.0
6.4 (Warpage IS 3495(4))	500.0
6.2 (Water Absorption IS 3495(2))	1000.0
4 (General quality IS 2691)	500.0
6.1 (Compressive Strength IS 3495(1))	2000.0
5 (Dimensions & Tolerances S 2691)	500.0

260

IS 2645 (2003) - Integral waterproofing compounds for cement mortar and concrete - Specification (Second Revision)

Integral waterproofing compounds for cement mortar and concrete - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.2.a (Setting Time (Initial Setting Time))	500.0
3.2.b (Setting Time (Final Setting Time))	500.0
3.3.a (Compressive Strength-3 days)	2000.0
3.1 (Permeability to Water)	3000.0

261

IS 2222 (1991) - Specification for burnt clay perforated building bricks (Third Revision)

Specification for burnt clay perforated building bricks (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (General quality)	500.0
5 (Dimensions & Tolerances)	500.0
6 (Perforations)	500.0
7.1 (Compressive Strength)	2000.0
7.2 (Water Absorption)	1000.0
7.3 (Efforescence)	1000.0
7.4 (Warpage)	500.0

262

IS 2202 : Part 2 (1983) - Wooden Flush Door Shutters (solid Core Type): Part 2 Particle Board And Hardboard Face Panels

Wooden Flush Door Shutters (solid Core Type): Part 2 Particle Board And Hardboard Face Panels

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Workmanship and Finish-IS 2202 (Part 1):1999)	1000.0
8.1 & 11.1 (Dimensions and Squareness-IS 4020 (Part 2):1998)	2000.0
11.2 (General Flatness-IS 4020 (Part 3):1998)	1000.0
11.3 (Local planeness Test-IS 4020 (Part 4):1998)	1000.0
11.4 (Impact Indentation-IS 4020 (Part 5):1998)	1000.0
11.5 (Flexure Test-IS 4020 (Part 6):1998)	1000.0
11.6 (Edge loading test-IS 4020 (Part 7):1998)	1500.0
11.7 (Shock Resistance test-IS 4020 (Part 8):1998)	1500.0
11.8 (Buckling Test-IS 4020 (Part 9):1998)	1500.0
11.9 (Slamming Test-IS 4020 (Part 10):1998)	1000.0
11.10 (Misuse Test-IS 4020 (Part 11):1998)	1000.0
11.11 (Varing Humidity Test-IS 4020 (Part 12):1998)	3000.0
11.12 (End Immersion Test-IS 4020 (Part 13):1998)	1000.0
11.13 (Knife test-IS 4020 (Part 14):1998)	1000.0
11.14 (Glue Adhesion Test-IS 4020 (Part 15):1998)	1000.0
11.15 (Screw Withdrawal Resistance Test-IS 4020 (Part 16):1998)	1000.0

263

IS 2202 : Part 1 (2023) - Wooden flush door shutters (Solid Core Type) - Specification: Part 1 plywood face panels (Sixth Revision)

Wooden flush door shutters (Solid Core Type) - Specification: Part 1 plywood face panels (Sixth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11.9.2 or 11.9.3 (Slamming Test-Cl 2.1 or 3.1 of IS 4020 (Part 10):1998)	1000.0
11.10 (Misuse Test-IIS 4020 (Part 11):1998)	1000.0
11.12 (End Immersion Test-IS 4020 (Part 13):1998 for BWP and 3cycle for MR)	1000.0
11.13 (Knife test-IS 4020 (Part 14):1998)	1000.0
11.15 (Screw Withdrawal Resistance Test-IS 4020 (Part 16):1998)	1500.0
11.14 (Glue Adhesion Test-IS 4020 (Part 15):1998 for BWP and (60± 2)°C for MR)	1000.0
9 (Workmanship and Finish-IS 2202 (Part 1):1999)	1000.0
11.1 (Dimensions and Squareness-IS 4020 (Part 2):1998)	2000.0
11.2 (General Flatness-IS 4020 (Part 3):1998)	1000.0
11.3 (Local planeness Test-IS 4020 (Part 4):1998)	1000.0
11.4 (Impact Indentation-IS 4020 (Part 5):1998)	1000.0
11.5 (Flexure Test-IS 4020 (Part 6):1998)	1000.0
11.6 (Edge loading test-IS 4020 (Part 7):1998)	1500.0
11.7.1 and 11.7.2 (Shock Resistance test- Cl 2.1 & 3.1 of IS 4020 (Part 8):1998)	1500.0
11.8 (Buckling Test-IS 4020 (Part 9):1998)	1500.0
11.11 (Varying Humidity Test-IS 4020 (Part 12):1998)	3000.0

264

IS 2185 : Part 3 (1984) - Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

Concrete Masonry Units Part 3 Autoclaved Cellular Aerated Concrete Blocks

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.1 (General )	500.0
8.3 (Block Density, kg/m³)	1000.0
8.4 (Compressive Strength, in N/mm²)	12000.0
8.6 (Drying Shrinkage, in %)	1000.0
8.2 (Dimensions (Length, width and thickness))	3000.0

265

IS 2185 : Part 1 (2005) - Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision)

Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.1 (General -IS 2185 : Part 1)	500.0
9.3 & 5 (Block Density-Annex C of -IS 2185 : Part 1)	1000.0
9.4 & Table2 (Compressive Strength-Annex D of -IS 2185 : Part 1)	4000.0
9.5 (Water Absorption-Annex E of -IS 2185 : Part 1)	1000.0
9.6 (Drying Shrinkage-Annex F of -IS 2185 : Part 1)	2000.0
9.7 (Moisture movement-Annex G of -IS 2185 : Part 1)	1000.0
9.2, 4.2.3 & Table 1 (Dimensions-Annex B of -IS 2185 : Part 1)	500.0

266

IS 2180 (1988) - Specification for heavy duty burnt clay building bricks (Third Revision)

Specification for heavy duty burnt clay building bricks (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.3 (Efforescence)	1000.0
4 (General quality)	500.0
6.2 (Water Absorption)	1000.0
6.1 (Compressive Strength)	2000.0
6.4 (Bulk Density)	500.0
5 (Dimensions & Tolerances)	500.0

267

IS 1659 (2004) - Block boards - Specification (Fourth Revision)

Block boards - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.2.2 (Water Resistance Test -IS 1659:2004, Clause 8.2.3 & Annex F and G)	2000.0
9.2.3 (Adhesion of Plies-IS 1659:2004, Clause 8.2.3 & Annex G)	1000.0
9.2.4 (Mycological Tests-IS 1659:2004, Clause 8.2.3 & Annex H)	2000.0
9.2.6 (Spot Test-IS 1659:2004, Clause 8.2.3 & Annex K)	2000.0
7, 8.1.4, and 8.1.5 (Dimension & Tolerances-IS 1659:2004, Annex D)	1000.0
9.2.1 (Dimensional Changes caused by Humidity-IS 1659:2004, Clause 8.2.3 & Annex E)	1000.0
9.2.5 (Modulus of Rupture & Modulus of Elasticity-IS 1659:2004, Clause 8.2.3 & Annex J)	2000.0
8.1.3 (Defects--IS 1659:2004, Clause 6.3.3 and IS 303 / IS 1328)	1000.0

268

IS 1328 (1996) - Veneered Decorative Plywood -Specification

Veneered Decorative Plywood -Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11.1.1 (Moisture Content IS 1734 (Part 1):1983)	1000.0
11.1.2 (Water Resistance test--IS 1328:1996)	2000.0
8 (Dimension and tolerances-IS 1328:1996)	1000.0

269

IS 1130 (1969) - Marble (blocks, Slabs And Tiles)

Marble (blocks, Slabs And Tiles)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Moisture Absorption (as per 1124), %)	1000.0
7 (Hardness)	2000.0
7 (Specific Gravity)	1000.0

270

IS 1077 (1992) - Common burnt clay building bricks - Specification (Fifth Revision)

Common burnt clay building bricks - Specification (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (GENERAL QUALITY IS 1077 : 1992)	500.0
7.1 (Compressive Strength-IS 3495 (Part 1) : 2019)	2000.0
7.2 (Water Absorption IS 3495 (Part 2) : 2019)	1000.0
7.3 (Efflorescence IS 3495 (Part 3) : 2019)	1000.0
6 (DIMENSIONS AND TOLERANCES-IS 1077 : 1992)	500.0