NTH - Management Information System

National Test House (NWR), Jaipur

E-763, Road No. 9 F1 V.K.I.A Jaipur-302013, Rajasthan, Jaipur, Jaipur, Rajasthan, 302013

9717298334 nthjaipur-ca@nic.in

Scope List

Reset

234 Results

S.No.

Standard No.

Product

Testing Charges (Excl. Of Taxes)

IS 9417 (2018) - Welding of high strength steel bars for reinforced concrete construction - Recommendations (Second Revision)

Welding of high strength steel bars for reinforced concrete construction - Recommendations (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
13.1.1 (Tensile Test)	3000.0
13.1.2 (Mechanical Bend Test)	1000.0

IS 13620 (1993) - Fusion Bonded Epoxy Coated Reinforcing Bars -

Fusion Bonded Epoxy Coated Reinforcing Bars -

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

CUS/SR/NDT/CUSTOM/001 (2024) - Welding wire

Welding wire

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

Custom-7-ER-LM - Galvanized Steel Rope Net Wire

Galvanized Steel Rope Net Wire

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Tensile Strength of Element wire)	3000.0
1 (Breaking Force of Rope)	3000.0
8 (Chemical composition)	5000.0

ILC Of paper - Customized Specification for the ILC of paper

Customized Specification for the ILC of paper

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

IS 8662 (2004) - Enamel, synthetic exterior: (A) undercoating (B) finishing, for railway coaches - Specification (Second Revision)

Enamel, synthetic exterior: (A) undercoating (B) finishing, for railway coaches - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.6.xi.a (Volume solids)	3000.0
CLAUSE-4.5.2,Table-1 (Dry Film Thickness(DFT))	1500.0
6.7 (Pigment content)	1000.0
6.6.iii.a (Drying time Surface Dry)	1200.0
6.6.iii.b (Drying time Hard Dry)	1200.0
6.6.iii.d (Drying time Tack Free)	1200.0
6.6.iii.c (Hard dry at 70 DegC with 15 min flash- off time)	1200.0
6.6.ii (Mass, in kg/101itres)	1500.0
6.6.viii (Scratch hardness after 48 h air drying (1 000 g weight))	1500.0

IS 1367 : Part 3 (2017) - Technical Supply Conditions for Threaded Steel Fasteners Part 3 Mechanical Properties of Fasteners Made of Carbon Steel and Bolts, Screws and Studs

Technical Supply Conditions for Threaded Steel Fasteners Part 3 Mechanical Properties of Fasteners Made of Carbon Steel and Bolts, Screws and Studs

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Chemical Composition, % by mass)	2500.0
7 (Mechanical and physical properties (Hardness,Rockwell C scale))	2000.0
7 (Mechanical and physical properties (Proof load test))	1000.0
7 (Mechanical and physical properties (ultimate tensile load))	2000.0
2 (Dimensions)	1000.0

IS 3757 (1985) - Specification for high strength structural bolts (Second Revision)

Specification for high strength structural bolts (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2 (Dimension (Length of bolt))	200.0
2 (Dimension (Shank Diameter))	200.0
2 (Dimension (Width across the flat))	400.0
2 (Dimension (Width across the edge))	400.0
2 (Dimension (Height of the head))	400.0
4 (Mechanical Properties(Tensile Strength) as per IS 1367(Part-3):2017 Clause No.- 7)	3000.0
4 (Mechanical Properties(Proof Load Test) as per IS 1367(Part-3):2017 Clause No.- 7)	2000.0
4 (Mechanical Properties(Ultimate Tensile Load) as per IS 1367(Part-3):2017 Clause No.- 7)	2000.0
4 (Mechanical Properties(Vickers Hardness ) as per IS 1367(Part-3):2017 Clause No.- 7)	2000.0
4 (Mechanical Properties( Rockwell Hardness Scale- C) as per IS 1367(Part-3):2017 Clause No.- 7)	2000.0
4 (Carbon)	500.0
4 (Sulfur)	500.0
4 (Phosphorus)	500.0
4 (Boron)	500.0

IS 6162 (Part-1):1971,Reaffirmed 2018 - Specification for Paper-Covered Aluminium Conductors

Specification for Paper-Covered Aluminium Conductors

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

IS 10500 - Potability Test

Potability Test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Fluoride)	500.0
2 (pH Value)	200.0
3 (Chloride)	300.0
4 (Total Dissolved Solids)	300.0
5 (Turbidity)	200.0
6 (Calcium)	500.0
7 (Magnesium)	500.0
8 (Sulphate)	400.0
9 (Nitrate)	400.0
10 (Total Hardness)	300.0
11 (Total Alkalinity)	400.0
12 (E. Coli)	500.0
13 (Total Coliform)	500.0

13778 (2012) - WINDING WIRES

WINDING WIRES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
PART 2 (Determination of Dimensions)	2000.0
PART 3 (Mechanical Properties)	3000.0
PART 5 (Electrical Properties-Electrical Resistance)	5000.0

Custom Specification-NWR - Hardened Concrete

Hardened Concrete

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Cement Content)	2500.0
2 (Silt Content)	1000.0
3 (pH Value)	500.0
4 (Alkali Aggregate Reactivity)	1000.0

IS 278 (2009) - Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

Galvanized steel barbed wire for fencing - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12.1 (Breaking Load of Completed Barbed Wire)	1000.0
12.1 (Tensile Strength of Line Wire)	1000.0
12.3 (Ductility)	1000.0
12.2.1 (Zinc Coating of Line wire)	2000.0
5 (Dimension/ Sizes)	1000.0
9 (Freedom from Defects)	500.0
12.2.2 (Zinc Coating of Point wire)	2000.0

IS 2141 (2000) - Hot dip galvanized stay strand - Specification (Fourth Revision)

Hot dip galvanized stay strand - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Sulphur)	500.0
4 (Phosphorus)	500.0
6.2 (Breaking Force of Single Wire)	2000.0
7 (Freedom from defect)	1000.0
8.1 (Wrapping Test of wire)	1000.0
9.1 (Breaking Force of Strand)	3000.0
9.1 (Elongation of Strand)	1000.0
8.1 (Wire Diameter)	1000.0
9.2 (Mass of Zinc Coating)	2000.0

Custom specification (NWR)-Misc. - Custom specification (NWR)-Misc.

Custom specification (NWR)-Misc.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Electrical Conductivity (EC))	500.0
2 (pH)	500.0
4 (Total Dissolved Solids (TDS))	500.0
3 (Coliform)	1000.0

IS 14268 (2022) - Uncoated stress relieved low relaxation seven - Wire (Ply) strand for prestressed concrete - Specification (First Revision)

Uncoated stress relieved low relaxation seven - Wire (Ply) strand for prestressed concrete - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Nominal Mass of strand - IS 14268: 2022.)	1500.0
6.1 (Nominal Diameter of strand- IS 14268: 2022.)	1000.0
6.2 (Length of lay of Strand- IS 14268: 2022.)	1000.0
4.2 (Centre wire shall have 1.5% greater in diameter than the surrounding wires - IS 14268: 2022.)	1000.0
Table 2 (Cl 6.2.1, Cl 6.2.2, Cl 6.3) (0.2% Proof Load, Breaking Strength of Strand, Total Elongation.)	3000.0
6.2.3 (Total Elongation under Load on gauge length of 600 mm- IS 14268: 2022.)	1000.0
6.2.2 (Breaking Load of Strand- IS 1608 (Part 1): 2022/ IS 14268: 2022.)	3000.0
6.2.2 (0.2% Proof Load of Strand - IS 1608 (Part 1): 2022/ IS 14268: 2022.)	1000.0
6.3 (Tensile Strength of Strand- IS 1608 (Part 1): 2022/ IS 14268: 2022, MPa.)	1000.0
4.1.2 (Chemical composition (Annexure for NABL parameters))	3500.0
4.1.2 (Sulphur+Phosphorus (As per IS 7904:2018))	500.0
4.5 (Visual observation)	1000.0

CUS/SR/MECH-2 - Shear plate

Shear plate

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Chemical composition)	5000.0
1.0 (Breaking load)	3000.0

Manufacture/Customer Specification - Test as per Manufacturer/Customer Specification

Test as per Manufacturer/Customer Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
45 (Verification of Desktop Computer as per Manufacturer Technical Specification)	5000.0
46 (Tests as per Manufacturer Technical Specification)	10000.0
11 (Marking of Sample)	1.0

IS 383 (2016) & CPWD Vol. I Specifications - Specification for Coarse & Fine Aggregate

Specification for Coarse & Fine Aggregate

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
CPWD Specs (Silt Content)	1000.0
6.3 (Sieve Analysis)	2000.0

IS 398 : Part 4 (1994) - Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

Aluminium conductors for overhead transmission purposes: Part 4 aluminium alloy stranded conductors (Aluminium - Magnesium - Silicon Type) - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Chemical composition)	5000.0
12.4 (Resistance test of Aluminium Alloy wire(7 wire construction))	1000.0
9.2(2) (Measurement of lay ratio - Outer layer(19 wire construction))	1000.0
1 ()	-

IS 398 Part 2 RA 2018 (2018) - ALUMINIUM CONDUCTORS FOR OVERHEAD TRANSMISSION PURPOSES

ALUMINIUM CONDUCTORS FOR OVERHEAD TRANSMISSION PURPOSES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

Custom-1-NTH-LM - Fence Post Hollow Section and Fence Post Support Strip

Fence Post Hollow Section and Fence Post Support Strip

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Chemical composition)	5000.0
2 (Thickness)	500.0
10 (Salt Spray Test for 1440 Hours)	72000.0
7 (Mass of Zinc Coating)	1000.0
9 (Powder coating thickness)	1000.0
8 (Uniformity of coating)	500.0
6 (Percentage Elongation at 5.65 √area)	1000.0
5 (Yield Strength)	1000.0
4 (Tensile Strength)	1000.0
3 (Nominal Mass)	1000.0
1 (Dimension of Post)	1000.0

Custom-5-NTH-LM - Wire Mesh Panel

Wire Mesh Panel

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Width)	200.0
2 (Height)	200.0
5 (Tensile Strength of wire)	3000.0
10 (Diameter of Wire)	500.0
7 (Mass of Zinc Coating)	1000.0
10 (Diameter of Wire)	500.0
8 (Powder Coating Thickness)	2000.0
12 (Unit Weight)	500.0
9 (Salt Spray Test for 1000 Hours)	50000.0
19 (Uniformity of Coating)	500.0
14 (Yield Stress of wire)	1000.0
16 (Carbon)	500.0
17 (Sulphur)	500.0
18 (Phosphorus)	500.0
18 (Sulphur + Phosphorus)	500.0
8 (Chemical composition)	5000.0
11 (Mesh Size (c/c))	300.0
9 (Salt Spray Test for 1440 hours)	60000.0
0 (Powder Coating Thickness Test)	2000.0
8 (Chemical composition)	5000.0
6 (Weld Shear Strength)	2000.0
2 (Adhesion test for coating)	2000.0

Custom-Mech-NR - Custom-Mech-NR

Custom-Mech-NR

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

IS 6012-1992 - Measurement of coating thickness by Eddy current method

Measurement of coating thickness by Eddy current method

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Coating Thickness)	2000.0

IS 17876 (2022) - Stainless Steel Welded Pipes and Tubes for General Services - Specification

Stainless Steel Welded Pipes and Tubes for General Services - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.1 (Tensile Requirement - Tensile Strength as per IS 1608 Part 1 or Test Method specified)	1000.0
10.1 (Tensile Requirement - Yield Strength as per IS 1608 Part 1 or Test Method specified)	1000.0
10.1 (Tensile Requirement - %Percentage of Elongation (on Gauge Length of 50mm) as per IS 1608 Part 1 or Test Method specified)	1000.0
24 (Outside Diameter, mm)	1000.0
24 (Wall Thickness, mm)	1000.0
8 (Chemical Composition - Ladle Analysis as per IS 228 and its relevant parts or any other established instrumental/chemical method)	5000.0

IS 17875 (2022) - Stainless Steel Seamless Pipes and Tubes for General Services

Stainless Steel Seamless Pipes and Tubes for General Services

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.1 (Tensile Strength)	1000.0
10.1 (Yield Strength)	1000.0
10.1 (Percent Elongation)	1000.0
23 (Outside Diameter)	500.0
23 (Wall Thickness)	500.0
8 (CHEMICAL COMPOSITION, C,Si,Mn,Ni,Cr, Mo, S,P,N,Cu ,Others)	5000.0
12 (Rockwell Hardness)	1500.0
12 (Brinell Hardness Test)	1500.0
12 (Rockwell Hardness)	1500.0
12 (Brinell Hardness Test)	1500.0

Custom Standard for RPPT Lab. Jaipur (2024) - Custom Standard for RPPT Lab. Jaipur

Custom Standard for RPPT Lab. Jaipur

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Average Thickness in mm)	2000.0

IS 210 (2009) - Grey iron castings - Specification (First Revision)

Grey iron castings - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
15 (Tensile Strength)	2500.0
16 (Brinell Hardness)	2000.0
6 (Chemical Composition (Sulphur))	500.0
6 (Chemical Composition (Phosphorus))	1000.0

MMDTS-22001 - Technical Requirements of Anodized Aluminium Braille Stickers for Signage on Railway coaches

Technical Requirements of Anodized Aluminium Braille Stickers for Signage on Railway coaches

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Heat Resistance at 120 deg. C for 3 hours)	1200.0
2 (Ease of Cleaning)	1500.0

1
2
3
Next
Last