NTH - Management Information System

Search by Standard No.

Reset

4235 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

121

National Test House (SR), Chennai

# IS 383 (2016) - Coarse and Fine aggregate for Concrete (Fine aggregate -River sand)

Coarse and Fine aggregate for Concrete (Fine aggregate -River sand)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

122

National Test House (WR), Mumbai

AWWA C222-18 (2018) - Polyurethane Coatings and Linings for Steel Water Pipe and Fittings

Polyurethane Coatings and Linings for Steel Water Pipe and Fittings

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 Polyurethane System Requirements (Cathodic disbondment (ASTM G8))	5000.0
Prequalification requirements of polyurethane system (Flexibility ASTM D522 Test Method B)	1000.0
Prequalification requirements of polyurethane system (Impact resistance (ASTM G14))	2500.0
Prequalification requirements of polyurethane system (Abrasion resistance CS17 wheel with a 1-kg weight (ASTM D4060 ))	5000.0
Prequalification requirements of polyurethane system (Chemical resistance 10 % sulfuric acid (H2SO4) immersion test for 30 days ASTM D543 Practice A)	1500.0
Prequalification requirements of polyurethane system (Chemical resistance 30 percent sodium chloride (NaCl), immersion test for 30 days ASTM D543 Practice A)	1500.0
Prequalification requirements of polyurethane system (Chemical resistance 30 percent sodium hydroxide (NaOH), immersion test for 30 days ASTM D543 Practice A)	1500.0
Prequalification requirements of polyurethane system (Water absorption ASTM D570)	1500.0
Prequalification requirements of polyurethane system (Hardness Shore D scale ASTM D2240)	2000.0
Prequalification requirements of polyurethane system (Adhesion to steel(pull off ) ASTM D4541)	5000.0
Prequalification requirements of polyurethane system (Dry film thickness(DFT) microns)	1000.0
Prequalification requirements of polyurethane system (Electrical continuity inspection(Holiday test))	3500.0
Prequalification requirements of polyurethane system (Appearance)	1000.0
Prequalification requirements of polyurethane system (Resistance to UV Degradation ( ASTM G154) 4 h UV at 60 (±3) °C Black Panel Temperature; 4 h Condensation at 50 (±3) °C Black Panel Temperature)	3500.0
1a (Specific Gravity (after Mixing Comp A+ Comp B))	1000.0
additional parameter (Adhesion to steel)	1200.0

123

National Test House (WR), Mumbai

IS 13213 (2018) - Polyurethane full gloss enamel (Two Pack) - Specification (First Revision)

Polyurethane full gloss enamel (Two Pack) - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl 1 Table 1 (Please see Annexure (All possible Tests))	60000.0
Cl 1 Table 1 (Please see Annexure Durability ( Outdoor exposure only) + Keeping properties)	30000.0

124

National Test House (NWR), Jaipur

IS/IEC : 60529 (2001 reaff : 2019) - Degree of Protection Provided by Enclosure(IP CODE)

Degree of Protection Provided by Enclosure(IP CODE)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
13.4/13.5 First Characteristic Numeral 6 (No ingress of Dust)	7500.0
14.2.7, Second characteristic numeral 7 (14.2.7, Second characteristic numeral 7 :Protected against the effects of temporary immersion in water)	7500.0

125

National Test House (WR), Mumbai

Custom-34-NTH-LM - W-Beam Metal Crash Barrier

W-Beam Metal Crash Barrier

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Tensile Strength)	2000.0
2 (Yield stress)	1000.0
3 (Elongation)	1000.0
4 (Mass per Metre)	1500.0
5 (Bend Test)	1000.0
6 (Carbon)	500.0
7 (Sulphur)	500.0
8 (Phosphorus)	500.0
9 (Manganese)	500.0
10 (Carbon Equivalent)	500.0

126

National Test House (WR), Mumbai

# IS 5986 - W Beam & C Post

W Beam & C Post

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Chemical composition)	3500.0
Cl 8.3 (Yield strength)	1000.0
Cl 8.3 (Tensile strength)	1000.0
Cl 8.3 (% Elongation)	1000.0
Cl 16 (Weight per meter)	1000.0
Cl 13 (Freedom from defect)	1000.0
Cl 9 (Bend Test)	1000.0
- (Mass of Zinc Coating)	2000.0
- (Uniformity of Coating)	1000.0
Cl 15 (Dimensions)	1000.0

127

National Test House (WR), Mumbai

IS 5986 (2017) - Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

Hot rolled steel sheet, plate and strip for forming and flanging purposes - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.2.2 (Bend Test)	1500.0

128

National Test House (WR), Mumbai

AWWA C210-15 (2015) - Solvent Free Liquid epoxy Coating (Red / Grey) for steel Water pipeline &Fittings Internal

Solvent Free Liquid epoxy Coating (Red / Grey) for steel Water pipeline &Fittings Internal

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table 1 Prequalification Requirements a) (Immersion and vapour resistance test for 30 days in: 1. Deionized Water (ANSI/ AWWA C 210-2015 Clause No. 5.2.1.1--ASTM D 6943))	3000.0
Table 1 Prequalification Requirements b) (Immersion and vapour resistance test for 30 days in: 2. Sulphuric Acid,1% by weight ANSI/ AWWA C 210-2015 Clause No. 5.2.1.1-ASTM D 6943)	3000.0
Table 1 Prequalification Requirements c) (Immersion and vapour resistance test for 30 days in: 3.Sodium Hydroxide, 1% by weight ANSI/ AWWA C 210-2015 Clause No. 5.2.1.1-ASTM D 6943)	3000.0
Table 1 2 Prequalification Requirements (Cathodic disbondment test, 28 days, -1.5V AWWA C 210 Clause No. 5.2.1.2 /*ASTM G 8)	5000.0
Quality Control Requirements Table 2 1 (Appearance AWWA C 210-2015 Clause No. 5.5.1)	100.0
Quality Control Requirements .2 Table 2 (Cure test AWWA C 210-2015 Clause No. 5.5.2/ASTM D 5402)	1000.0
Quality Control Requirements 3 Table 2 (Dry Film Thickness AWWA C 210-2015 Clause No. 5.5.3)	1000.0
Quality Control Requirements 4 Table 2 (Adhesion to steel (Pull Adhesion to steel (Pull Off Adhesion test) ASTM D 4541)	5000.0
Quality Control Requirements 5. Table 2 (Electrical Continuity Inspection / (Pin-hole detector @ 2.5 KV))	5000.0
Quality Control Requirements (Abrasion resistance - 'Abrasion resistance of organic coatings by the Taber Abraser" - 1 kg load / 1000 cycles CS 17 wheel or CS 10 wheel ASTM D4060)	5000.0
Quality Control Requirements (Shore D hardness "ASTM D2240 ")	1200.0
Quality Control Requirements (Compressive Strength "ASTM C109 ")	5000.0
ADD PARAMETER 1 (Potable Water Service test a)PH on the lines of IS 10500)	1000.0
additional parameter (Potable Water Service test b)Turbidity on the lines of IS 10500)	1000.0
additional parameter (Potable Water Service test c)Total hardness on the lines of IS 10500)	1000.0
additional parameter (Potable Water Service test d)Chloride on the lines of IS 10500)	1000.0
additional parameter (Potable Water Service test e)Nitrate on the lines of IS 10500)	1000.0
additional parameter (Potable Water Service test f)Iron on the lines of IS 10500)	1000.0
additional parameter (Potable Water Service test g)Arsenic on the lines of IS 10500)	1000.0
additional parameter (Potable Water Service test h)Fluoride on the lines of IS 10500)	1000.0
1.1 (Specific Gravity (after Mixing Comp A+ Comp B))	1000.0
additional parameter (Abrasion Resistance 1560Cycle/mill as per ASTM D4060)	5000.0

129

National Test House (NR), Ghaziabad

NTH_CUSTOM/2026/015 - NTH/NR/CH/002

NTH/NR/CH/002

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Dry Material Content )	1000.0
2 (Chloride Content )	1000.0
3 (Alkali Content )	1500.0

130

National Test House (WR), Mumbai

NTH_CUSTOM/2026/014 (2001) - # Customized specification of Hot refreshment Box in oven at 180-220 deg.C for 12-15 minutes

# Customized specification of Hot refreshment Box in oven at 180-220 deg.C for 12-15 minutes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Thermal Resistance /Heat ageing test for Hot refreshment Box in oven at 180-220 deg.C for 12-15 minutes)	2000.0

131

National Test House (WR), Mumbai

Customized specification for IS 14933:2001 - Customized specification for IS 14933:2001

Customized specification for IS 14933:2001

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

132

National Test House (NR), Ghaziabad

NTH_CUSTOM/2026/014 (1994) - Aluminium Conductor For Overhead Transmission Purposes

Aluminium Conductor For Overhead Transmission Purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Mechanical Test As Per Annexure)	6000.0
2 (Resistance Test)	2000.0
3 (Mechanical Test for 37 wire or other As per Annexure)	8000.0

133

National Test House (NR), Ghaziabad

# IS 516 (2021) - Hardened concrete methods of test part 1 testing of strength of hardened concrete section 1 compressive,flexucal and split tensile strength (First Revision)

Hardened concrete methods of test part 1 testing of strength of hardened concrete section 1 compressive,flexucal and split tensile strength (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3 (Concrete -Compressive Strength of CC Cube 1 set)	1200.0

134

National Test House (SR), Chennai

IS 14953 (2006) - Textiles – Polyester or polyamide mosquito nets – Specification (first revision)

Textiles – Polyester or polyamide mosquito nets – Specification (first revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1 (Identification of Fabric)	2000.0
3.1 (Denier)	1000.0
3.2 (Width)	500.0
3.2 (Mass)	1000.0
3.2 (No. of holes along base plus bias within 6.25 sq.cm area)	500.0
3.2 (Bursting Strength)	2000.0
3.2 (pH value of aqueous extract(Cold Method))	1000.0
3.2 (Water Soluble Matter)	1000.0
3.2 (Colour fastness to washing)	2000.0
3.2 (Colour fastness to light)	3000.0
5.2 (Length)	500.0
5.2 (Width)	500.0
5.2 (Overall height)	500.0
5.2 (Height of reinforcement)	500.0
5.5 (Flame Resistance)	4000.0

135

National Test House (AUR), AURIC Satellite Centre

IS 1501 : Part 1 (2020) - Metallic Materials — Vickers Hardness Test Part 1 Test Method ( Fifth Revision )

Metallic Materials — Vickers Hardness Test Part 1 Test Method ( Fifth Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

136

National Test House (WR), Mumbai

Custom-7-ER-LM - Galvanized Steel Rope Net Wire

Galvanized Steel Rope Net Wire

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Breaking Force of Rope)	3000.0
2 (Punching Resistance of Steel Wire Rope Net)	2000.0
3 (Rope Size)	1000.0
4 (Mass)	1500.0
5 (Mass of Zinc Coating)	2000.0
6 (Carbon)	500.0
6 (Sulphur)	500.0
6 (Phosphorus)	500.0
6 (Manganese)	1000.0
6 (Silicon)	1000.0
7 (Tensile Strength of Element wire)	3000.0

137

National Test House (WR), Mumbai

Custom-3-NTH-LM - Concertina coil/PTCC

Concertina coil/PTCC

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Carbon)	500.0
8 (Sulphur)	500.0
8 (Phosphorus)	500.0
8 (Chromium)	1000.0
8 (Manganese)	500.0
8 (Nickel)	500.0
8 (Silicon)	500.0
1 (Diameter of wire, mm)	1000.0
2 (Blade Length)	1000.0
3 (Center to center distance between blade)	1000.0
4 (Thickness of Blade)	1000.0
5 (Tensile Strength of wire)	3000.0
6 (Yield Stress of wire)	1000.0
7 (Percentage Elongation of wire)	1000.0
9 (Mass of Zinc Coating of wire)	1000.0
10 (Salt Spray Test for 1440 Hours)	72000.0
0 (Chemical Composition of Razor blade &wire(SS304/316))	6000.0
1 (Coil Diameter, mm)	1000.0
0 (Chemical Composition of wire)	6000.0
11 (Unit Weight)	1000.0
0 (Diameter of Concertina Coil, mm)	1000.0
0 (No. of Loops)	1000.0

138

National Test House (WR), Mumbai

RDSO SPECIFICATION No. M&C/ PCN/ 100/ 2018 (2018) - FULL GLOSS POLYURETHANE ENAMEL (TWO PACK)

FULL GLOSS POLYURETHANE ENAMEL (TWO PACK)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Identification of polyisocyanates)	1200.0
3 (Consistency)	1200.0
4 (Finish)	1200.0
5 (Colour)	1200.0
6 (Dry film thickness)	1200.0
7 (Volume solids)	1200.0
8 (Scratch hardness (1.5 Kg Load))	1200.0
9 (Flexibility & Adhesion (6.25 mm mandrel))	1200.0
10 (Flash point (a) Component ‘A’ (b) Component ‘B’)	2400.0
11 (Fineness of Grind)	1200.0
12 (Pot life (After induction time) at a) 27±2°C b)40±2ºC)	1500.0
13 (Gloss at 60° angle of incidence)	1200.0
14 (Mass in Kg/10 litres)	1200.0
15 (Keeping properties)	5000.0
16 (Theoretical spreading rate)	2000.0
17 (% poly isocyanate by mass, in hardener)	3000.0
18 (Viscosity (Efflux time by Ford cup No.4) of paint i.e. mix. Of two components at 27± 2 °C in Supply condition)	1200.0
19 (Accelerated Tests (a) Resistance to 30% Sulphuric acid (weight by volume) (b) Resistance to 20% caustic potash (weight by volume) (c) Resistance to oil (d) Resistance to solvents (e) Resistance to water)	7200.0
20 (Durability Tests Accelerated weathering test)	37500.0
21 (Humidity Test (500 Hours))	9000.0
22 (Abrasion resistance-1000 Cycle)	5000.0
Durability test (Accelerated Test for Durability, 750 hrs (ASTM G 53, 4 hrs UV and 4 hrs Condensation))	45000.0

139

National Test House (WR), Mumbai

CUSTOM/POLYCARBONATE SEAL & SS WIRE/2026

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

140

National Test House (SR), Chennai

NTH_CUSTOM/2026/013 - Ruberised Coir Mattress (Firm's specified specification)

Ruberised Coir Mattress (Firm's specified specification)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Overall Size (LxWxH) )	1000.0
2 (Thickness of Top Layer)	1000.0
3 (Identification of Top layer)	2000.0
4 (Density of top layer)	1000.0
5 (Thickness of 2nd layer)	1000.0
6 (Density of 2nd layer)	1000.0
7 (Thickness of 3rd layer)	1000.0
8 (Density of 3rd layer)	1000.0
9 (Thickness of 4th layer)	1000.0
10 (Density of 4th layer)	1000.0
11 (GSM of Baniyan Cloth)	1000.0
12 (Weight of Coir Mattress)	1000.0
13 (Color of Rexin cover)	500.0
14 (Colour of base fabric)	500.0
15 (Appearance of base fabric)	500.0
16 (Thickness of base fabric)	1000.0
17 (Weight of finished fabric)	1000.0
18 (Breaking strength (Warp/Weft))	2000.0
19 (Adhesion of coating)	2000.0
20 (Gelling test)	1000.0
21 (Resistance to Heat)	1000.0
22 (Loss of mass due to heat)	1000.0
23 (ILD (Indentation load Deflection test))	2000.0

141

National Test House (NER), Guwahati

IS 2185 : Part 1 (2005) - Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision)

Concrete masonry units - Specification: Part 1 hollow and solid concrete blocks (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.7 (Moisture movement-Annex G of -IS 2185 : Part 1)	1000.0
9.5 (Water Absorption-Annex E of -IS 2185 : Part 1)	1000.0
9.3 & 5 (Block Density-Annex C of -IS 2185 : Part 1)	1000.0
9.2, 4.2.3 & Table 1 (Dimensions-Annex B of -IS 2185 : Part 1)	500.0
9.4 & Table2 (Compressive Strength-Annex D of -IS 2185 : Part 1)	4000.0

142

National Test House (ER), Alipore

ICF/MD/SPEC-091 ISSUE STATUS : 01 REV.N0 : 02 - SPECIFICATION FOR POWDER COATED ITEMS/ COMPONENTS USED IN RAILWAY PASSENGER COACHES

SPECIFICATION FOR POWDER COATED ITEMS/ COMPONENTS USED IN RAILWAY PASSENGER COACHES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.0 Type Test SR No. 5 (Dry Film Thickness)	1200.0
6.0 Type Test SR No. 6 (Gloss at 60 degrees)	1200.0
6.0 Type Test SR No. 8 (Scratch Hardness)	1200.0
6.0 Type test SR No. 7 (Finish)	1200.0
6.0 TYPE TEST sr no 1 (Protection against corrosion FOR 100 HOURS IS:101 (Part-6-Sec.1 ))	5000.0
6.0 TYPE TEST:SR No 2 (Protection against humidity IS:101 (Part 6/sec1))	2500.0
6.0 Type Test SR No 3 (Resistance to Heat double-bake schedule 16 hrs IS: 101 (Part-7/Sec.3) as per Clause 8 and 8.1.1 restricted to250degC)	2500.0
6.0 Type test SR No 4 (Colour Fastness to light(100 hours) As per clause D 3.2.3 of1S:8662 & IS: 133 Sl.N0.V11 Table.l Apparatus: Xenon Arc accelerated weatherometer in the region of 280-315nm)	5000.0

143

National Test House (NR), Ghaziabad

IS 4664 (1986) - Specification for pulp board (First Revision)

Specification for pulp board (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (Thickness)	1000.0
4.3 (Substance)	1000.0
4.5 (Burst index)	2000.0
4.5 (Ash)	2000.0
4.5 (pH)	1000.0
4.5 (Moisture content)	1000.0
4.5 (Brightness)	2000.0

144

National Test House (NER), Guwahati

IS 1060 - METHODS OF SAMPLING AND TEST FOR PAPER AND ALLIED PRODUCTS

METHODS OF SAMPLING AND TEST FOR PAPER AND ALLIED PRODUCTS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
IS 1060 (Part5/Sec5) (Substance (Grammage))	1000.0
IS 1060 (Part 5/Sec 6) (Tensile Index, MD)	1000.0
IS 1060 (Part 5/Sec 6) (Tensile Index, CD)	1000.0
IS 1060 (Part 6/Sec 1) (Tear Index, CD)	1000.0
IS 1060 (Part 6/Sec 1) (Tear Index, MD)	1000.0
IS 1060 (Part 6/Sec 3) (Double Fold, MD)	750.0
IS 1060 (Part 6/Sec 3) (Double Fold, CD)	750.0
IS 1060 (Part 6/Sec 2) (Bursting Strength)	2000.0
IS 1060 (Part 5/Sec 4) (One Minute Cobb)	2000.0
IS 1060 (Part 5/Sec 20) (Smoothness (Bendsten))	1000.0
IS 1060 (Part 5/Sec 20) (Porosity (Bendsten))	1000.0
IS/ISO 2471 (Opacity)	2000.0
IS 1060 (Part 4/Sec 13) (Brightness)	2000.0
IS 1060 (Part 5/Sec 12) (Gloss)	1500.0
IS 1060 (Part 5/Sec 2) (Moisture Content)	1000.0
IS 1060 (Part 4/Sec 3) (Ash Content)	2000.0
IS 1060 (Part 3) (Wax Pick)	2000.0
IS 1060 (Part 5/Sec 3) (Thickness)	1000.0
IS 1060 (Part 4/ Sec 7) (pH Value)	1000.0
IS 1060 (Part 3) (Surface pH)	1000.0
Firm's requirement (Grammage (Inner Pages))	1000.0
Firm's requirement (Grammage (Outer Cover))	1000.0
IS 1060 (Part.5/Sec.8) (Stiffness)	2000.0

145

National Test House (WR), Mumbai

#IS 1489(1 & 2 ) (2015) - Cement-PPC full test

Cement-PPC full test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
13 (Consistency)	500.0
7, Table 3, 1 (Fineness by Blaines method )	1000.0
7, Table 3, 3a (Setting Time-Initial )	250.0
7, Table 3, 3b (Setting Time-Final )	250.0
7, Table 3, 2a (Soundness by Le Chatlier)	500.0
7, Table 3, 2b (Soundness by autoclave )	1000.0
7, Table 3, 4a, 4b, 4c (Compressive Strength)	1000.0
7, Table 2, 6 (Drying shrinkage )	1000.0
7.4 (Insoluble residue, )	600.0
7.2.1 (Gravemetric) / 7.2.2 (EDTA) (Magnesia, )	600.0
7.3 (Total sulphur content calculated as sulphuric anhydride (SO3), )	500.0
6.2 (Loss on ignition, )	600.0
4.13 (Chloride content, )	500.0
4.11 & 4.12 (Alkali content )	1000.0
7 (Table 3 - v) (672 ± 4 hour (28 days) )	2000.0
7 ( Table 3 - v) (168 ± 2 hour (7 days) )	1000.0
7 (Table 3 - iv c) (672 ± 4 hour (28 days) )	1000.0

146

National Test House (WR), Mumbai

# IS 455:2015 (2015) - Cement-PSC full test

Cement-PSC full test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
13 (Consistency)	500.0
7, Table 2, i (Fineness by Blaines method)	1000.0
7, Table 2, iii a (Setting Time-Initial)	250.0
7, Table 2, iii b (Setting Time-Final)	250.0
7, Table 2, ii a (Soundness by Le Chatlier)	500.0
7, Table 2, ii b (Soundness by autoclave)	1000.0
7, Table 2, iv a, iv b, iv c (Compressive Strength)	1000.0
6 ,Table 1,i (Insoluble residue,)	600.0
6,Table 1,ii (Magnesia,)	600.0
6,Table 1,iii ("Total sulphur content calculated as sulphuric anhydride (SO3),")	600.0
6,Table 1,iv (Sulphide sulphur (S),)	600.0
6,Table 1,v (Loss on ignition,)	600.0
6,Table 1,vi (Chloride content,)	500.0
6,Table 1,vii (Alkali content)	1000.0
7 (Table 3 iv b) (168 ± 2 hour (7 days))	1000.0
7 (Table 3 - iv c) (672 ± 4 hour (28 days) )	1000.0
7 (Table 3 - v) (Drying shrinkage )	1000.0
7 (Table 3 - v) (672 ± 4 hour (28 days) )	2000.0

147

National Test House (WR), Mumbai

# IS 269 (2015) - OP Cement-33,43,53,43s,53s grade full test

OP Cement-33,43,53,43s,53s grade full test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
13 (Consistency)	500.0
7, Table 3, 1 (Fineness by Blaines method )	1000.0
7, Table 3, 3a (Setting Time-Initial )	250.0
7, Table 3, 3b (Setting Time-Final )	250.0
7, Table 3, 2a (Soundness by Le Chatlier )	500.0
7, Table 3, 2b (Soundness by autoclave )	1000.0
6.1 (Ratio of percentage of lime to percentages of silica, alumina and iron oxide, )	600.0
6.1 (Ratio of percentage of alumina to that of iron oxide, Min )	600.0
4.1 (Insoluble residue,)	600.0
4.8.1 (Gravimetric)/ 4.8.2 (EDTA) (Magnesia)	600.0
4.9 (Total sulphur content calculated as sulphuric anhydride (SO3),)	500.0
4.2 (Loss on ignition,)	600.0
4.13 (Chloride content)	500.0
4.11 & 4.12 (Alkali content)	1000.0
7, Table 3, 4a, 4b, 4c (Compressive Strength (3 duration))	1000.0
7 (Table 3 - v) (672 ± 4 hours (28 days) )	2000.0
- (Drying shrinkage )	1000.0
7 (Table 3 iv b) (168 ± 2 hour (7 days) )	1000.0
7 Table 3 - iv c) (672 ± 4 hour (28 days) )	1000.0

148

National Test House (NR), Ghaziabad

IS 6615 (2021) - GENERAL PURPOSE PACKING/WRAPPING PAPER — SPECIFICATION

GENERAL PURPOSE PACKING/WRAPPING PAPER — SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (General)	1000.0
4.2 (Grammage)	1000.0
4.3, Table 1, (i) (Burst index)	2000.0
4.3, Table 1, (ii) (Tear index, MD)	1000.0
4.3, Table 1, (ii) (Tear index, CD)	1000.0
4.3, Table 1, (iii) (Tensile index, MD)	2000.0
4.3, Table 1, (iv) (Moisture content)	1000.0
4.3, Table 1, (v) (Cobb, Top side)	1000.0
4.3, Table 1, (v) (Cobb, Bottom side)	1000.0

149

National Test House (SR), Chennai

# IS 14314 - Thinner, General Purpose, For Synthetic Paints and Varnishes-Specification

Thinner, General Purpose, For Synthetic Paints and Varnishes-Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl 4.2, Table 1, SI No. (i) (Colour - Clause 5 of IS 82:1973)	1000.0
Cl 4.2, Table 1, SI No. (ii) (Odour - IS 14314)	1000.0
Cl 4.2, Table 1, SI No. (iii) (Spot test - IS 14314 )	1000.0
Cl 4.2, Table 1, SI No. (iv) (Relative density at 27 deg C - Clause 6 of IS 82:1973)	1000.0
Cl 4.2 Table 1, SI No. (v) (Distillation range with a minimum 95 percent recovery by volume - Clause 7 of IS 82:1973)	3000.0
Clause 4.2, Table 1, Sl No. (vi) (Flash Point (Abel) – IS 101 (Part 1/Sec 6):1986)	1000.0
Clause 4.2, Table 1, Sl No. (vii) (Residue on evaporation - Clause 8 of IS 82:1973)	1000.0
Clause 4.2, Table 1, Sl No. (viii) (Hydrocarbon content - Appendix B of IS 14314)	2000.0
Clause 4.2, Table 1, Sl No. (ix) (Water content - IS 101 (Part 2/Sec 1):1988 )	1000.0
Clause 4.2, Table 1, Sl No. (x) (Copper corrosion - Clause 11 of IS 82:1973)	1000.0
Clause 5.1 (Keeping Quality – IS 14315)	3000.0

150

National Test House (ER), Kolkata

IS 9000 : Part 2 : Sec 1 to 4 (1977) - Basic environmental testing procdures for electronic and electrical items: Part 2 cold test

Basic environmental testing procdures for electronic and electrical items: Part 2 cold test

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

First
Prev
4
5
6
7
Next
Last