NTH - Management Information System

Search by Standard No.

Reset

3858 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

631

National Test House (NR), Ghaziabad

IS 1180 : Part 1 (2014) - Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) Single Phase ( 1kVA to 100kVA ) [1kVA to 100kVA]

Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) Single Phase ( 1kVA to 100kVA )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
21.3(b) (Temperature Rise Test)	15000.0
21.2(a) (Measurement of Winding Resistance)	700.0
21.2(b) (Measurement of voltage ratio and, check of voltage vector relationship)	700.0
21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test))	6000.0
21.5.1.221.5.2.221.5.3.2 (Pressure test (routine))	3500.0
21.4.(d) (Adhesion by Tape Test)	5000.0
21.5.1.321.5.2.321.5.3.3 (Oil leakage test)	5000.0
21.2(c) (Measurement of impedance voltage (principal tapping), short circuit impedance and load loss (At 50% and 100% load))	3000.0
7.9 & 8.9 (Measurement of Permissible flux density and over fluxing)	6500.0
21.4( c) (Measurement of No load current at 112.5 percent voltage)	2000.0
21.2(e) (Measurement of insulation resistance)	700.0
21.2(d) (Measurement of no Load and loss and current)	3000.0
21.2(f) (lnduced Over Voltage withstand test)	1200.0
21.4(a) (Determination of sound levels)	5000.0
21.4( e) (BDV of Oil in the tranformer)	10000.0
21.3(a) (Lighting Impulse Voltage Test)	25000.0
21.2(g) (AC High Voltage Withstand Test)	1200.0
As per CBIP Pub No. 317 Cl. 3.17 (Magnetic Balance Test)	2000.0
As per CBIP Manual No. 317 Cl (Harmonics of No-load Current)	6000.0
As per CBIP No. 317 Cl. 3.10 (Zero Sequence Impedance Measurement)	2000.0
N.A. (Unbalance Current)	2000.0

632

National Test House (WR), Mumbai

Custom specification NTH WR for General surface coating material - Custom specification NTH WR for General surface coating materials

Custom specification NTH WR for General surface coating materials

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Galvanizing (Mass of Zinc Coating))	1500.0
- (Uniformity of Coating)	1500.0
- (Purity of Copper)	2000.0

633

National Test House (ER), Kolkata

RDSO/2018/GE: IRS-0004-Part-I (2019) - Non-woven Geotextile to be used as separator/filtration in Railway formation

Non-woven Geotextile to be used as separator/filtration in Railway formation

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Annexure - 1 (Material/Polymer)	5000.0
Annexure-1 (Trapezoidal Tear Strength)	2000.0

634

National Test House (NR), Ghaziabad

IS 1180 : Part 1 (2014) - Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) ( 201kVA TO 500kVA ) [201kVA TO 500kVA]

Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) ( 201kVA TO 500kVA )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
21.3(b) (Temperature Rise Test)	30000.0
21.2(a) (Measurement of Winding Resistance)	1000.0
21.2(b) (Measurement of voltage ratio and, check of voltage vector relationship)	1500.0
21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test))	15000.0
21.5.1.221.5.2.221.5.3.2 (Pressure test (routine))	5000.0
21.4.(d) (Adhesion by Tape Test)	5000.0
21.5.1.321.5.2.321.5.3.3 (Oil leakage test)	7000.0
21.2(c) (Measurement of impedance voltage (principal tapping), short circuit impedance and load loss (At 50% and 100% load))	6000.0
7.9 & 8.9 (Measurement of Permissible flux density and over fluxing)	15000.0
21.4( c) (Measurement of No load current at 112.5 percent voltage)	2000.0
21.2(e) (Measurement of insulation resistance)	1000.0
21.2(d) (Measurement of no Load and loss and current)	5500.0
21.2(f) (lnduced Over Voltage withstand test)	2500.0
21.4(a) (Determination of sound levels)	6000.0
21.4( e) (BDV of Oil in the tranformer)	10000.0
21.3(a) (Lightning Impulse Voltage Test)	40000.0
21.2(g) (AC High Voltage Withstand Test)	2500.0
As per CBIP Manual No. 317 Cl (Harmonics of No-load Current)	12000.0
As per CBIP No. 317 Cl. 3.10 (Zero Sequence Impedance Measurement)	4000.0
As per CBIP No. 317 Cl. 3.10 (Magnetic Balance Test)	4000.0
N.A. (Unbalance Current)	4000.0

635

National Test House (ER), Kolkata

IRS T-44 (2023) - GLASS FILLED NYLON-66 INSULATING LINERS

GLASS FILLED NYLON-66 INSULATING LINERS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table-1A (Specific Gravity)	1000.0
Table-1A (Glass Filler)	2000.0
Table-1A (Tensile Strength)	1500.0
Table-1A (Elongation at break)	1500.0
Table-1A (Cross Breaking Strength)	3000.0
Table-1A (Dielectric Strength)	10000.0
Table-1A (Volume Resistivity)	10000.0
Table 1A (Melting Point)	1000.0

636

National Test House (ER), Kolkata

IRS T-55 (2023) - RAIL PADS FOR PLACING BENEATH RAILS

RAIL PADS FOR PLACING BENEATH RAILS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.5 (Hardness, Shore'A')	1000.0
4.5 (Tensile Strength before ageing)	1500.0
4.5 (Tensile Strength after ageing at 100 +/-1 deg C for 72+0/-2 hrs)	1500.0
4.5 (Retention after ageing)	1000.0
4.5 (Elongation at break before ageing)	1500.0
4.5 (Elongation at break after ageing at 100 +/-1 deg C for 72+0/-2 hrs)	1500.0
4.5 (Retention after ageing)	1000.0
4.5 (Relaxed Modulus at 100% Elongation, before ageing)	1000.0
4.5 (Relaxed Modulus at 100% Elongation, Change after Ageing at 100+/-1 deg C for 72+0/-2 hrs)	1000.0
4.5 (Ash Content)	2000.0
4.5 (Specific Gravity)	1000.0
4.5 (Weight Test)	1000.0
4.5 (Compression Set Subjected to 50% Compression at 100+/-1 deg C for 24+0/-2 hrs)	3000.0
4.5 (Tension set subjected to 50% Stretch at 100+/-1 deg C for 24+0/-2 hrs)	3000.0
4.5 (Electrical Resistance (Before Immersion))	5000.0
4.5 (Electrical Resistance (After Immersion))	5000.0

637

National Test House (NR), Ghaziabad

IS:3400 PT-22 1984 - METHODS OF TEST FOR VULCANIZED RUBBER Sulphur content only

METHODS OF TEST FOR VULCANIZED RUBBER Sulphur content only

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl 4 .A-3 (TOTAL SULPHUR CONTENT % by mass)	7000.0

638

National Test House (WR), Mumbai

Customized Specification for Bed Sheet and Pillow Cover - Customized Specification for Bed Sheet and Pillow Cover

Customized Specification for Bed Sheet and Pillow Cover

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Nomenclature of the item)	500.0
- (Dimensions)	1000.0
- (Weight)	500.0
- (Design)	500.0
- (Active Ingredients)	2000.0
- (Visual Inspection)	500.0

639

National Test House (WR), Mumbai

RDSO SPECIFICATION No. M&C/PCN/129/2018 (2018) - SPECIFICATION FOR UNSATURATED POLYSTER BASE KNIFING PUTTY (TWO PACK), Please refer annexure

SPECIFICATION FOR UNSATURATED POLYSTER BASE KNIFING PUTTY (TWO PACK), Please refer annexure

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Unsaturated Polyester Putty (Please refer annexure for the result of Unsaturated Polyester Putty)	20500.0

640

National Test House (ER), Alipore

IS 1868 (1996) - Anodic coatings on aluminium and its alloys - Specification (Third Revision)

Anodic coatings on aluminium and its alloys - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.2 c (Eddy current method) (Thickness of Coating, Micron)	2000.0

641

National Test House (WR), Mumbai

Customized Specification for FRP Chajja - Customized Specification for FRP Chajja [-]

Customized Specification for FRP Chajja

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Tensile Strength)	2000.0
- (Compression Strength)	3000.0
- (Flexural Strength)	3000.0
- (Thickness)	1000.0

642

National Test House (ER), Kolkata

IS 17568 (2021) - THERMAL PAPER SPECIFICATION

THERMAL PAPER SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.3 (Grammage)	1000.0
4.2 (Tensile Index, MD)	1000.0
4.2 (Tensile Index, CD)	1000.0
4.2 (Tear Index, MD)	1000.0
4.2 (Tear Index, CD)	1000.0
4.2 (Opacity)	2000.0
4.2 (Brightness ISO)	2000.0
4.2 (Gloss at 75 deg.)	1500.0
4.2 (Smoothness (Bendtsen))	2000.0
4.2 (Wax Pick)	2000.0

643

National Test House (WR), Mumbai

RDSO Specification No. M&C/PCN/100/2018 - POLYURETHANE SURFACER (TWOPACK)

POLYURETHANE SURFACER (TWOPACK)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Drying time a) Surface dry b) Hard dry c) Hard dry at 70°C)	3600.0
2 (Consistency)	1200.0
3 (Finish)	1200.0
4 (Colour)	1200.0
5 (Dry film thickness)	1200.0
6 (Volume solids, %)	2000.0
7 (Scratch hardness (1.5Kg Load))	1200.0
9 (Flashpoint a) Component ‘A’ b) Component ‘B’)	2400.0
10 (Fineness of Grind)	1200.0
11 (Pot life (After induction time) i) 27±2°C ii) 40±2°C)	1500.0
12 (Mass in Kg/10 litres)	1200.0
13 (Keeping properties)	2000.0
14 (Theoretical spreading rate)	2000.0
15 (Viscosity (Efflux time by Ford cup No.4) of paint i.e. mix of two components at 27± 2 °C in Supply condition)	1200.0

644

National Test House (WR), Mumbai

RDSO SPECIFICATION M&C/PCN/100/2018 PUTTY - UNSATURATED POLYESTER BASE KNIFING PUTTY (TWO PACK)

UNSATURATED POLYESTER BASE KNIFING PUTTY (TWO PACK)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Drying time: a)Surface dry b) Hard dry c)Hard dry time at 70 Deg. C)	3600.0
2 (Consistency)	1200.0
3 (Stopping properties)	2000.0
4 (Rubbing properties)	2000.0
5 (Hold out Property)	2000.0
6 (Adhesion & Compatibility of Paint System)	2000.0
7 (Pot life ,at 27±2 Deg. C)	1500.0
8 (% solids)	1200.0
9 (Keeping properties)	5000.0

645

National Test House (NWR), Jaipur

IS 6956 : 2001(Reaffirmed 2022) - Cover paper-Specification

Cover paper-Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Burst Index (KPa.m²/g))	1000.0
- (pH)	1000.0
- (Tensile Index(Nm/g)- MD)	1000.0
- (Tensile Index(Nm/g)- CD)	1000.0
- (Opacity Percent)	1000.0
- (Brightness)	2000.0
- (One minute Cobb Test (g/m²))	2000.0
- (Smoothness(Bendtsen)ml./min.)	2000.0
- (Folding Endurance -MD)	750.0
- (Folding Endurance -CD)	750.0
- (Bending Stiffness Index,Nm⁶/Kg3 -MD)	500.0
- (Bending Stiffness Index,Nm⁶/Kg3 -CD)	500.0
- (Wax Pick)	1000.0
- (Grammage (g/m²))	1000.0

646

National Test House (NWR), Jaipur

TI/SPC/OHE/CW/0971 - Hard drawn grooved copper(HDGC) contact Wire for Electrical Traction (Drawn out of continuous Cast copper wire Rod) .

Hard drawn grooved copper(HDGC) contact Wire for Electrical Traction (Drawn out of continuous Cast copper wire Rod) .

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.1.5 (Brinell Hardness)	2000.0
9.1.2 (Dimension)	2000.0
9.1.3 (Weight)	1500.0
9.1.6 (Tensile Strength)	2000.0
9.1.7 (Elongation at Gauge Length 200 mm)	1000.0
9.1.1 (Visual Examination)	1000.0
9.1.4 (Resistance/km at 20 Deg. C)	3000.0
9.1.9 ((Cu+Ag))	2000.0
8 (Chemical composition)	5000.0

647

National Test House (ER), Kolkata

CUSTOM - Chlorinated rubber thinner

Chlorinated rubber thinner

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Viscosity)	1200.0
2 (Appearance)	1200.0

648

National Test House (ER), Kolkata

IS 1632 (1993) - Optical instruments - Bubbles - Specification (First Revision)

Optical instruments - Bubbles - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Calibration of Precision Level)	2500.0

649

National Test House (NWR), Jaipur

ETI/OHE/50(6/97) re-designated to TI/SPC/OHE/CAT(Cu-Cd)/0971 (2021) - Technical Specification for Cadmium Copper Conductors for Over Head Railway Traction.

Technical Specification for Cadmium Copper Conductors for Over Head Railway Traction.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.3.6 (Tensile Strength)	19000.0
8.3.8, 4.1.1 Table-2 (Chemical Composition as per clause 8.3.8, 4.1.1 Table-2 of TI/SPC/OHE/CAT(Cu-Cd)/0971 (2021))	5000.0
8.3.7 (Wrapping Test on Wire)	1000.0
8.3.5 (Electrical Resistance of Wire and Stranded Conductor as per clause 8.3.5 of TI/SPC/OHE/CAT(Cu-Cd)/0971 (2021))	3000.0
4.14 (Measurement of (Diameter & Weight of individual wires and stranded conductor, Lay length & lay ratio), Tensile Test and Wrapping Test as per TI/SPC/OHE/CAT(Cu-Cd)/0971 (2021).)	10000.0

650

National Test House (WR), Mumbai

IS 15850 (2009) - Nuclear grade boron carbide - Specification

Nuclear grade boron carbide - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Clauses 4.2.1 and 4.2.2 (Total Boron In Boron Carbide)	2000.0

651

National Test House (NWR), Jaipur

Custom-6-NTH-LM - G.I Welded Wire Mesh

G.I Welded Wire Mesh

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2 (Tensile Strength of G.I Wire)	1500.0
1 (Weld Shear Test of Wire Mesh)	2000.0
5 (Yield Strength of G.I Wire)	1500.0
15 (Mass of Zinc Coating of Galvanized steel Longitudinal wire)	2000.0
16 (Mass of Zinc Coating of Galvanized steel Transverse wire)	2000.0
6 (Dimension)	4000.0
17 (Carbon)	500.0
18 (Sulphur)	500.0
19 (Phopshorus)	500.0
20 (Manganese)	500.0
21 (Silicon)	500.0
3 (Mass of Zinc Coating of G.I Wire)	2000.0
10 (Bend Test of G.I Wire)	1000.0
9 (Percentage of Area Reduction of G.I Wire)	1500.0
7 (Tensile strength of Galvanized steel Longitudinal wire)	1000.0
11 (Tensile strength of Galvanized steel Transverse wire)	1000.0
8 (Yield stress of Galvanized steel Longitudinal wire)	1000.0
12 (Yield stress of Galvanized steel Cross wire)	1000.0
9 (Percentage of Area Reduction of G.I Wire)	1500.0

652

National Test House (WR), Mumbai

CGRSP rubber pad as per RDSO Specification - CGRSP rubber pad as per RDSO Specification

CGRSP rubber pad as per RDSO Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Compression Set)	2000.0
- (Modulus at 100% Elongation)	2000.0
- (Elongation at Break)	2000.0
- (Tensile Strength)	2000.0
- (Shore hardness)	1000.0
- (Tension Set Subject to 50% Stretch)	2000.0
- (Tensile Strength after ageing at 100±1ºC for 72+0/-2 hrs.)	3000.0
- (Tensile Strength(Retension after ageing))	1000.0
- (Elongation at Break After ageing at 100±1ºC for 72+(0/-2) hrs)	3000.0
- (Elongation at Break (Retention after ageing))	1000.0
- (Thickness)	1000.0
- (Specific Gravity)	1000.0
- (Ash Contents)	2000.0
- (Electrical resistance before immersion as per appendix "G")	2000.0
- (Electrical resistance after immersion as per appendix "G")	3000.0
- (Adhesion Strength test)	2000.0

653

National Test House (WR), Mumbai

GFN Liners as per RDSO Specification - GFN Liners as per RDSO Specification [-]

GFN Liners as per RDSO Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Internal Cavity)	1000.0
- (Water absorption)	2000.0
- (Cross Breaking Load)	2000.0
- (Glass Filler)	2000.0
- (Specific Gravity)	1000.0
- (Dielectric Strength)	5000.0
- (Volume Resistivity)	3000.0

654

National Test House (ER), Kolkata

IS 13467 : 2024 - Chlorinated Rubber for Paints Specification

Chlorinated Rubber for Paints Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (Lead Restriction)	1200.0
4.3 (Toxic Heavy Metal Restriction)	6000.0
4.4 table 1, sl (i) (Volatile mater)	1200.0
4.4 table 1, sl. (ii) (Viscosity (Ford Cup))	1200.0
4.4 table 1, sl. (iii) (Clarity of the film)	1200.0
4.4 table 1, sl. (vii) (Ash content)	1200.0
4.4 table 1, sl. (viii) (Acidity as HCL)	1200.0

655

National Test House (WR), Mumbai

Customized Specification for Printed Papers/Books - Customized Specification for Printed Papers/Books [-]

Customized Specification for Printed Papers/Books

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (GSM)	1000.0

656

National Test House (ER), Kolkata

5986 -2011 - HOT ROLLED STEEL FLAT PRODUCTS FOR STRUCTURAL FORMING AND FLANGING PURPOSES — SPECIFICATION

HOT ROLLED STEEL FLAT PRODUCTS FOR STRUCTURAL FORMING AND FLANGING PURPOSES — SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1, 7.2 (Carbon content, Percent by mass)	1200.0

657

National Test House (WR), Mumbai

28907 (2021) - CUSTOM SPECIFICATION -IR STD. SPEC SR NO T-31-2021 FOR LADLE ANALYSIS [-]

CUSTOM SPECIFICATION -IR STD. SPEC SR NO T-31-2021 FOR LADLE ANALYSIS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.3.1 (Carbon)	1000.0
4.3.1 (Manganese)	1000.0
4.3.1 (Silicon)	1000.0
4.3.1 (Sulphur)	1000.0
4.3.1 (Phosphorus)	1000.0

658

National Test House (WR), Mumbai

Customized Specification for Fleece Laminated Self adhesive SBS Modified membrane - Customized Specification for Fleece Laminated Self adhesive SBS Modified membrane [-]

Customized Specification for Fleece Laminated Self adhesive SBS Modified membrane

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Thickness)	1000.0
- (Pressure Head Test)	2000.0
- (Tensile Strength(Longitudinal direction))	1000.0
- (Tensile Strength(Transversal))	1000.0
- (Elongation at Break(Longitudinal))	1000.0
- (Elongation at Break(Transversal))	1000.0
- (Tear Strength(Longitudinal))	1000.0
- (Tear Strength(Transversal))	1000.0
- (Low temperature flexibility)	2000.0
- (Heat Resistance)	1000.0
- (Static Puncture Resistance)	1000.0
- (Softening Point of coating compound)	1500.0
- (Water absorption at 24 hours)	2000.0

659

National Test House (NWR), Jaipur

IS 6603 (2024) - Stainless Steel Semi-Finished Products, Bars, Wire Rods and Bright Bars — Specification (2nd Revision)

Stainless Steel Semi-Finished Products, Bars, Wire Rods and Bright Bars — Specification (2nd Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Chemical Composition-The ladle analysis of steel, when carried out either by the methods specified in relevant parts of IS 228 or any other established international instrumental/chemical method)	5000.0
9.0 Mechancial Properites (The tensile test ( Tensile Stregth, 0.2% Proof/Yield Stress, % of Elongation ) shall be carried out in accordance with IS 1608 (Part 1))	3000.0
9.0 Mechancial Properties (Hardness shall be determined in accordance with IS 1500 (Part 1), IS 1501 (Part 1) or IS 1586 (Part 1).)	2000.0
9.0 Mechanical Properties (Charpy impact test shall be carried out in accordance with IS 1757 (Part 1).)	5000.0
12 (Dimesnion Measurment in mm dimensional tolerances for the bars and flats shall be as laid down in Table 26 to Table 36 given at Annex C of IS 6603)	1000.0
14 (Corrosion Resistance Test - The material shall be tested for corrosion resistance as per IS 10461 (Part 1) or ISO 3651 (Part 2) or any other method)	10000.0
6 (Freedom From Defects - Visual Examination as per IS 6603 Cl.6.1 & 6.2)	1000.0

660

National Test House (NWR), Jaipur

ASME Section IX (2019) - 2019 Boiler and Pressure Vessel Code

2019 Boiler and Pressure Vessel Code

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Tensile Strength in Longitudinal direction as per ASTM D 5147)	2000.0