NTH - Management Information System

Search by Standard No.

Reset

3858 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

571

National Test House (NR), Ghaziabad

NTH/NR/IRCON/Booted Sleeper Pad (2025) - Booted Sleeper Pad

Booted Sleeper Pad

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's Requirements (Results of Test)	3000.0

572

National Test House (NR), Ghaziabad

NTH/NR/IRCON/Rubber Boot (2025) - Rubber Boot

Rubber Boot

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's requirement (Results of Test)	13000.0

573

National Test House (NR), Ghaziabad

NTH/NR/IRCON/PVC Membrane (2025) - PVC Water Proofing Membrane

PVC Water Proofing Membrane

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's requirement (Results of Test)	36000.0

574

National Test House (NR), Ghaziabad

NTH/NR/IRCON/Geotextile (2025) - Non Woven Geotextiles

Non Woven Geotextiles

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's requirement (Results of Test)	10000.0

575

National Test House (ER), Alipore

IS 133 : Part 1 (2013) - Enamel, interior: (A) undercoating (B) finishing - Specification: Part 1 for household and decorative purposes (Fifth Revision)

Enamel, interior: (A) undercoating (B) finishing - Specification: Part 1 for household and decorative purposes (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

576

National Test House (ER), Alipore

IS 12744 (2013 RA 2018) - Ready Mixed Paint, Air Drying, Red Oxide - Zinc Phosphate, Priming - Specification ( For Domestic and Decorative Applications)

Ready Mixed Paint, Air Drying, Red Oxide - Zinc Phosphate, Priming - Specification ( For Domestic and Decorative Applications)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Lead Restriction(Lead as Metallic Lead))	2000.0
5.3 Table 1(i) (Drying Time ,Hard Dry in hours)	500.0
5.3 Table 1(ii) (Consistency)	100.0
5.3 Table 1(iii) (Finish)	200.0
5.3 Table 1(iv) (colour in Natural Daylight)	1200.0
5.3 Table 1(v) (Wet opacity meter square per liter)	1200.0
5.3 Table 1(vi) (Pigment content, percent by mass)	2100.0
5.3 Table 1(vii) (Zinc phosphate ,percent by mass on pigment (annex C))	3500.0
5.3 Table 1(viii) (Red Oxide (as Fe2O3),percent by mass on pigment)	2500.0
5.3 Table 1(ix)a (Flexibility and adhesion a) Scratch hardness (Load 800 g))	2000.0
5.3 Table 1(ix) b (Flexibility and adhesion b) Bend test (with 6.25 mm dia mandrel in type 1 apparatus))	1200.0
5.3 Table 1(x) a (Resistance to humidity under conditions of condensation: a) Resistance to humidity (for 7 days))	2500.0
5.3 Table 1(x)b (Resistance to humidity under conditions of condensation: b) Resistance to salt spray to (for96 hours))	2500.0
5.3 Table 1(ix) (Flash point, Deg C)	2000.0
5.3 Table 1(xii) (Mass in kg/10 ltrs)	1500.0
5.3 Table 1(xiii) (Keeping properties (for 12 months ))	10000.0
1 ()	-

577

National Test House (ER), Alipore

IS 164 (2015) - Ready mixed paint for road marking - Specification (Second Revision)

Ready mixed paint for road marking - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.6.2.2 (Toxic metals as Pb Cd Cr: (Atomic Absorption Spectrophotometric methods))	2000.0
5.6.2.1 (Volatile Organic Compounds (VOC): (IS 101 (Part 2/Sec 1) and IS 101 (Part 2/Sec 2)))	3000.0
xii (Keeping properties (IS 101 (Part 6/Sec 2)))	5000.0
xi (Mass in kg/10 litre, (IS 101 (Part 1/Sec 7)))	500.0
x (Flash point (IS 101 (Part 1/Sec 6)))	600.0
ix (Residue on sieve, Max, (IS 101 (Part 8/Sec 1)))	500.0
viii-b (Resistance to wear a) For Grade 2 (as refer in IS 164))	1000.0
viii-a (Resistance to wear a) For Grade 1 (As refer in IS 164))	1000.0
vii (Recoating property (As refer in IS 164))	600.0
vi (Resistance to bleeding (As refer in IS 164))	500.0
v (Wet Opacity (IS 101 (Part 4/Sec 1)))	600.0
iv (Colour (IS 101 (Part 4/Sec 2)))	500.0
iii (Finish (IS 101 (Part 3/Sec 4)))	500.0
ii (Consistency (Annex D))	500.0
i (Drying time, Max b) Hard dry (IS 101 (Part 3/Sec 1)))	500.0
5.5 table 1 i (Drying time, Max a) Surface dry (IS 101 (Part 3/Sec 1)))	500.0
5.4 (Lead Restriction, Max, (IS 101 (Part 8/Sec 5)))	1200.0
5.3 (Durability (Annex C) 25 days)	2000.0
5.2 (Applications (Annex B))	500.0

578

National Test House (ER), Alipore

M&C/ PCN/ 127 /2020 (Rev 2.0 ) Dated Sep 2020 (2020) - RDSO Specification for Anti-Graffiti Clear coat for the exterior painting of Railway coaches, Diesel & Electric locomotives”

RDSO Specification for Anti-Graffiti Clear coat for the exterior painting of Railway coaches, Diesel & Electric locomotives”

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Drying Time at (27± 2)˚C , i)Surface Dry/Touch Dry As per IS:101-86 (Part- 3/ Sec- 1)Reaffirmed 2017)	400.0
1 (Drying Time at (27± 2)˚C ii)Hard Dry As per IS:101-86 (Part- 3/ Sec- 1)Reaffirmed 2017)	400.0
1 (Drying Time at (27± 2)˚C iii) Recoating Time As per IS:101-86 (Part- 3/ Sec- 1)Reaffirmed 2017)	400.0
2 (Finish (IS 101 (Part 3/Sec 4): 1987)	400.0
3 (Gloss at 60˚ IS : 101-88 (Part 4/Sec-4),)	1200.0
4 (Flexibility & Adhesion (By Mandrel size 6.25 mm) IS : 101-88 (Part -5/Sec-2),)	1200.0
6 (Adhesion Test ( Cross Cut Tape Test) ASTM-D-3359)	1200.0
7 (Consistency/Efflux Time at (27± 2)˚C IS : 101-89 (Part -1 Sec-5),)	1500.0
8 (Protection against corrosion under conditions of condensation (500 hrs) IS: 101-88 (Part- 6 /Sec- 1),)	15000.0
9 (Solvent MEK Rub Test 100 DS ASTM D-5402)	1500.0
10(a) (ACCELERATED TESTS Resistance to 30 % ,w/v (a)Citric acid for 3 Hours appendix III)	1000.0
10(b) (ACCELERATED TESTS (b) Resistance to 5% ,v/v Ammonia for 20 Minutes appendix III)	1000.0
10(c) (ACCELERATED TESTS (c) Resistance to Lubricating oil for 24 Hours appendix III)	1000.0
10(d) i (ACCELERATED TESTS (d) Resistance to Solvents for 20 Minutes (i)Acetone appendix III)	1000.0
10(d) ii (ACCELERATED TESTS d) Resistance to Solvents for 20 Minutes (ii) Toluene appendix III)	1000.0
11 (Mass in Kg/10 litres (IS : 101-87 (Part -1/ Sec7),Reaffirmed 2019))	1000.0
12 (Flash Point deg.C (IS: 101-87 (Part- 1/ Sec6),Reaffirmed 2019))	1000.0
13 (Keeping Property/Shelf Life for 1 year)	10000.0
14 (Anti Graffiti test ASTM D-6578)	5000.0
16 (Coverage ( Spreading Capacity) , Min. , at 1-4 microns DFT, By Spray, Dipping, Roller, Wiping method appendix-I)	1200.0
17 (Dry Film Thickness per coat in micron, by Wipe/Spray APPENDIX-I)	1000.0
18 (Pencil Hardness ASTM –D- 3363)	1500.0
19 (Volume Solid,% APPENDIX-I)	2000.0
20 i (Durability Tests : Accelerated Weathering by (Fluorescent UV-Condensation Type for 750 Hours ASTM-G-154 (APPENDIX-IV) Cycle 4 Hrs. U.V. Light from UV-B lamps with a peak emission @ 313 nm. and 4 Hours Condensation alternatively, temp. 50 ˚C)	45000.0
20 ii (Durability Tests : Accelerated Weathering by Xenon Arc for 2000hours DIN- 53387 Superseded by DIN EN ISO 4892-2)	120000.0
1 (1)	-

579

National Test House (NWR), Jaipur

FSSAI (-) - Food Products Standard - Specifications for Oils and Fats [-]

Food Products Standard - Specifications for Oils and Fats

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Test Result (As per Annexure))	5000.0

580

National Test House (ER), Alipore

MORTH 803 Thermoplastic Road Marking Material MORTH-5th Revision 2013 (2013) - Ministry of Road Transport and Highways - Specifications form Road And Bridge Works 803.4.2

Ministry of Road Transport and Highways - Specifications form Road And Bridge Works 803.4.2

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
803.4.1.2 (Binder Content % by mass (BS 3262 (Part 1)))	1200.0
803.4.1.2 (Calcium carbonate and Inert fillers (BS 3262 (Part 1)))	1200.0
803.4.1.2 (Colour)	1200.0
803.4.1.2 (Cracking Resistance (BS 3262 (Part 1)))	1200.0
803.4.1.2 (Drying Time)	1200.0
803.4.1.2 (Flow resistance (BS 3262 (Part 1)))	1200.0
803.4.1.2 (Glass Bead content % (BS 3262 (Part 1)))	1200.0
803.4.1.2 (Luminance (White) (Daylight luminance at 45 degrees))	1200.0
803.4.1.2 (Softening point (BS 3262 (Part 1)) ASTM D 36)	1200.0
803.4.1.2 (Titanium Dioxide, as TiO2 % by mass (BS 3262 (Part 1)))	1200.0
803.4.2.3 (Free flowing properties)	500.0
803.4.2.3 (Roundness)	1000.0
803.4.2.3 (Gradation (Type 2) - below 180 micron(BS 6088))	700.0
803.4.2.3 (Gradation (Type 2) - 180 micron (BS 6088))	500.0
803.4.2.3 (Gradation (Type 2) - 300 micron (BS 6088))	600.0
803.4.2.3 (Gradation (Type 2) - 600 micron (BS 6088))	600.0
803.4.2.3 (Gradation (Type 2) - 850 micron (BS 6088))	600.0
803.4.2.3 (Gradation (Type 1) - 180 micron (BS 6088))	750.0
803.4.2.3 (Gradation (Type 1) - 425 micron (BS 6088))	750.0
803.4.2.3 (Gradation (Type 1) - 850 micron (BS 6088))	750.0
803.4.2.3 (Gradation (Type 1) 1.18mm (BS 6088))	750.0
803.4.2.3 (Appearance)	500.0

581

National Test House (ER), Alipore

IS 2932 (2013) - Enamel, synthetic, exterior: (a) Undercoating (b) Finishing - Specification (Fourth Revision)

Enamel, synthetic, exterior: (a) Undercoating (b) Finishing - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.9,xiv (Wet opacity, (IS 101 (Part 4/Sec 1)))	1500.0
6.9,xiii (Keeping properties, (IS 101 (Part 6/Sec 2)))	5000.0
6.9,xii (Accelerated storage stability test, (Annex G))	400.0
6.9 (Wet Opacity)	200.0
6.9, (Colour)	300.0
6.9,ix.b (Composition: Phthalic Anhydride Content, (IS 101 (Part 8/Sec 4)))	350.0
6.9,ix.a (Composition: Volume solids, (IS 101 (Part 8/Sec 6)))	2000.0
6.9,viii (Flash point, (IS 101 (Part 1/Sec 6)))	350.0
6.9,vii.b (Flexibility and adhesion:Bend test (with 6.25 mm in type 1 apparatus), (IS 101 (Part 5/Sec 2)))	350.0
6.9,vii.a (Flexibility and adhesion:Scratch hardness (Load 1 000 g), (IS 101 (Part 5/Sec 2)))	1500.0
6.9, vi (Colour, (IS 101 (Part 4/Sec 2)))	350.0
6.9,v (Fineness of grind, microns (IS 101 (Part 3/Sec 5)))	350.0
6.9,iv.b (Gloss, 60º, (IS 101 (Part 3/Sec 4)))	350.0
6.9,iv.a (Finish, (IS 101 (Part 3/Sec 4)))	350.0
6.9,iii.c (Drying time: Tack free, (IS 101 (Part 3/Sec 1)))	350.0
6.9,iii.b (Drying time: Hard dry, (IS 101 (Part 3/Sec 1)))	1000.0
6.9,iii.a (Drying time: surface dry, (IS 101 (Part 3/Sec 1)))	1200.0
6.9,ii (Mass, kg/10litre (IS 101 (Part 1/Sec 7)))	1200.0
6.9,i.b (Viscosity by Ford cup No. 4 at 27 ± 2°C (IS 101 (Part 1/Sec 5)))	350.0
6.9,i. a (Consistency)	1200.0
6.8 (Lead Restriction, (IS 101 (Part 8/Sec 4)))	350.0
6.7.1.3 (Durability: Accelerated weathering test Xenon Arc (700hrs.) (Annex C-4))	35000.0
6.7.1.3 (Durability: Accelerated weathering test QUV apparatus (Lamp Type UV 313, Cycle UV 4 hrs and condensation 4 hrs) Total 360 hrs)	1000.0
6.7.1.1 (Durability (Normal outdoor exposure test) 12 Months (Annex C))	10000.0
6.6 (Application Properties)	350.0
6.5 (Thinning Properties)	350.0
6.4 (Skin formation)	350.0
6.3 (Freedom from Coarse Particles)	350.0
6.2 (Condition in Container)	350.0
6.1.1 (Composition)	350.0
6.1.2 (Total Non-Volatile Content (IS 101 Part 8/Sec 2))	500.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Volatile Organic Content (VOC)- IS 101 (Part-2/Sec-1):1988 and IS 101 (Part-2/Sec-2):1986)	4000.0

582

National Test House (ER), Alipore

IS 15489 : 2013 NTH ER (2013) - PAINT, PLASTIC EMULSION — SPECIFICATION

PAINT, PLASTIC EMULSION — SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Composition)	700.0
6.2 (Conditions in the Container)	600.0
6.3 (Thinning)	600.0
6.4 (Application Properties)	600.0
6.5 (Mass in kg/10 litre)	700.0
6.6 (Opacity)	700.0
6.7 (Fastness to Light (Xenon Arc apparatus for 500 hrs))	25000.0
6.8 .1.1 (C-2 Durability Test (Normal Outdoor Exposure Test 12 Months ) for Exterior Use Only)	10000.0
6.9 (Lead Restriction)	700.0
6.10 (Keeping Properties (For 12 months))	5000.0
6.11 (i) Table 1 (Consistency)	700.0
6.11(ii) Table 1 (Drying time, a) Surface Dry)	400.0
6.11(ii) Table 1 (Drying time b) Hard dry)	400.0
6.11 (iii) Table 1 (Finish)	700.0
6.11 (iv) (Gloss at 60 Deg. Angle)	700.0
6.11(v) Table 1 (Colour)	300.0
6.11(vii) Table 1 (Resistance to alkali)	700.0
6.11 (viii) Table 1 (Washability and cleanability)	700.0
6.11 (x) Table 1 (Recoating properties)	200.0
6.12.2 Specific requirements VOC (Volatile Organic Compounds (VOC) % by mass)	2400.0
6.12 .2 Toxic metals (toxic metals such as lead, cadmium, chomium (VI) and their compounds)	2400.0
6.11 ix) Table 1 (Accelerated Storage Stability)	1000.0
customer requirement (Coverage)	1200.0
3.1.1 (Volatile Organic Compound (gm/litre))	3000.0
6.8 1.2 &6.8.2 (C-3 Durability Test ACCELERATED WEATHERING TEST Accelerated Weathering Apparatus QUV for 21 days UV condensation type)	18000.0

583

National Test House (WR), Mumbai

MDTS 48279 Rev 04 2022 (2022) - Technical Specification for Adhesion Promoting Primer Two Pack (MDTS 48279 Rev 04 2022)

Technical Specification for Adhesion Promoting Primer Two Pack (MDTS 48279 Rev 04 2022)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table 1 Technical requirement for Adhesion Promoting Primer (Two Pack) (Technical requirement for Adhesion Promoting Primer (Two Pack), Please refer annexure for the test results)	90800.0
Keeping properties/long duration tests (Keeping properties/long duration tests, Please refer annexure for the results)	10000.0

584

National Test House (WR), Mumbai

RDSO Specification No. M&C/PCN/100/2018 (2018) - M&C/PCN/100/2018 - Specification for Epoxy Based Zinc Phosphate Primer (Two Pack)

M&C/PCN/100/2018 - Specification for Epoxy Based Zinc Phosphate Primer (Two Pack)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table I and Table II (Requirement for Epoxy-Based Zinc Phosphate Primer (Two Pack) Please refer annexure for the test results)	51000.0
Keeping properties/long duration test (Keeping properties for 12 months/long duration test - please refer to annexure for the test result)	10000.0

585

National Test House (ER), Kolkata

IS 894 (1980) - Specification For Handloom Wool Blankets Brick Red (First Revision)

Specification For Handloom Wool Blankets Brick Red (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1 (Ends/dm)	1000.0
3.1 (Picks/dm)	1000.0
3.1 (Mass)	1000.0
3.1 (Breaking load (Warp))	1000.0
3.1 (Breaking Load (Weft))	1000.0
3.1 (Type of Weave)	1000.0
3.2 (Colour Fastness to Light)	3000.0
3.2 (Colour Fastness to Washing)	2000.0
3.2 (Colour Fastness to Rubbing)	2000.0
Firm's request (Stitches per cm)	1000.0
Firm's request (Fiber Composition)	2000.0
Firm's request (Colour of the Blanket)	500.0
3.2 (Scouring loss)	2000.0

586

National Test House (NWR), Jaipur

IEC 61537 (2006) - Cable Management-Cable tray system of Pre-galvanised steel sheet/ Stainless Steel

Cable Management-Cable tray system of Pre-galvanised steel sheet/ Stainless Steel

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table 1 (Chemical composition, % by mass)	5000.0
3 (Dimensions, mm)	1000.0
3 (Thickness, mm)	1000.0
3 (Bend test)	1000.0
3 (0.2% Proof Stress, N/mm2)	1000.0
3 (Tensile strength, N/mm2)	1000.0
3 (Percent Elongation)	1000.0
4 (Mass of Zinc Coating, GSM)	2000.0
7.1 (Mass of Zn coating)	2000.0
7.2 (Uniformity of Zinc coating)	1000.0
5 (Safe Working Load test)	3000.0

587

National Test House (ER), Alipore

IS 13043 (1991) - Covered manual metal arc welding electrodes - Determination of efficiency, metal recovery and deposition co - Efficien

Covered manual metal arc welding electrodes - Determination of efficiency, metal recovery and deposition co - Efficien

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Metal Recovery Test-Effective Electrode Efficiency)	3000.0

588

National Test House (ER), Alipore

IS 3600 : Part 5 (2018) - Method of testing fusion welded joints and weld metal in steel: Part 5 destructive tests on welds in metallic materials - Bend tests (Third Revision)

Method of testing fusion welded joints and weld metal in steel: Part 5 destructive tests on welds in metallic materials - Bend tests (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (TRANSVERSE ROOT or FACE BEND TEST)	1000.0

589

National Test House (ER), Kolkata

5677 & 13469 (1986 & 1992) - Specification for Shoe Upper Leather for Direct Moulding Process & Leather Shoes with Direct Moulded Polyvinyl Chloride (PVC) Sole.

Specification for Shoe Upper Leather for Direct Moulding Process & Leather Shoes with Direct Moulded Polyvinyl Chloride (PVC) Sole.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.5 of IS : 5677 (Tensile Strength of Upper Leather)	2000.0
5.3.1 of IS : 13469 (Tensile Strength of PVC Sole)	2000.0
5.3.1 of IS : 13469 (Flexing resistance cut growth at the end of 40,000 cycles)	2000.0
5.3.1 of IS : 13469 (Adhesion (Load at Toe point and Heel))	1000.0

590

National Test House (NWR), Jaipur

IS 1285 (2023) - Wrought Aluminium and Aluminium Alloys — Extruded Round Tube and Hollow Sections for General Engineering Purposes

Wrought Aluminium and Aluminium Alloys — Extruded Round Tube and Hollow Sections for General Engineering Purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Dimension)	1000.0
10.1 (Tensile strength test as per IS 1608 (Part 1):2022, N/mm2)	3000.0
9 (Chemical Analysis (as per IS 733))	5000.0
10 (% Elongation (as per IS 733))	1000.0
10 (0.2 % Proof Stress (as per IS 733))	1000.0
10 (Tensile Strength (as per IS 733))	1000.0
4 (Anodic coating thickness, micron)	2000.0
4 (Dry Film Thickness - Powder Coating as per IS 13871 by Test Method 5 of IS 101 Part-3 Sec.2 1989 or any other test method specified by the customer)	1500.0

591

National Test House (WR), Mumbai

IS: 1708 (Parts 1 to 18) : 1986 - Methods of Testing of Small Clear Specimens of Timber [Extra]

Methods of Testing of Small Clear Specimens of Timber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Part 1,Clause 4 (Moisture Content)	1000.0
Part 2,Clause 4.1.a (Specific gravity)	500.0
Part 2,Clause 4.1.b (Adjusted specific gravity)	500.0
Part 5,Clause 4.2.ii (Equivalent fibre stress at maximum load ( modulus of rupture - M of R ))	3000.0
Part 5,Clause 4.2.iii (Modulus of elasticity ( M of E ))	3000.0
Part 8,Clause 4.1.ii (Compressive strength-Parallel to grain [Compressive stress at maximum load])	1500.0
Part 9,Clause 4.1.ii (Compressive strength-Perpendicular to grain [Compressive stress at compression of 2.5 mm])	1500.0
Part 5, Clause 4.2(iii) (Modulus of Elasticity (in wet condition), N/mm^2.)	3000.0

592

National Test House (NWR), Jaipur

IS 12817 (2013) - Stainless Steel Butt Hinges

Stainless Steel Butt Hinges

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Dimensions)	2000.0
0 (Chemical Compositions as per IS 6911)	5000.0
0 (Chemical Compositions for Butt Hinges (SS 316) as per IS 6911)	5000.0
0 (Chemical Compositions for Bracket Wall Cladding (SS 304) as per IS 6911)	5000.0

593

National Test House (NWR), Jaipur

IS 1367 : Part 6 (2018) - Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision)

Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Chemical composition, % by mass)	2500.0
7 (Proof Load)	3000.0
7 (Hardness Test)	2000.0
1.1 (Dimensions)	1500.0

594

National Test House (NWR), Jaipur

5986 -2011 - HOT ROLLED STEEL FLAT PRODUCTS FOR STRUCTURAL FORMING AND FLANGING PURPOSES — SPECIFICATION

HOT ROLLED STEEL FLAT PRODUCTS FOR STRUCTURAL FORMING AND FLANGING PURPOSES — SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1, 7.2 (Carbon content, Percent by mass)	1200.0
8 (Chemical composition)	5000.0

595

National Test House (WR), Mumbai

RDSO - MDTS176 Rev. 04 (2016) - Technical specification for light weight body filler for high build-up passenger coaches

Technical specification for light weight body filler for high build-up passenger coaches

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Table 1 (Base filler (Visual under magnifier))	1200.0
Table 1 (Pot life at 27+/- 2 Deg. C, (min) - Ann II of M&C/PCN/100/2013)	1500.0
Table 1 (Specific Gravity (ASTM D 1475))	1200.0
Table 1 (Drying time a) surface dry max IS 101 (Part 3/sec 1))	1200.0
Table 1 (Drying time b) hard dry max IS 101 (Part 3/sec 1))	1200.0
Table 1 (Drying time c) Hard dry at 70 Deg C max IS 101 (Part 3/sec 1))	1200.0
Table 1 (Flash point a) Component A (IS 101 (Part 1/sec 6)))	1200.0
Table 1 (Flash point a) Component B (IS 101 (Part 1/sec 6)))	1200.0
Table 1 (Consistency (IS 101 (Part 1/Sec 5))	1200.0
Table 1 (Stopping properties (Appendix IX of M&C/PCN/100/2013))	1500.0
Table 1 (Rubbing properties (Appendix X of M&C/PCN/100/2013))	1500.0
Table 1 (Adhesion and compatibility in paint system (Appendix XII of M&C/PCN/100/2013))	1500.0
Table 1 (Shelf life/Keeping properties 12 months (Appendix III of M&C/PCN/100/2013))	5000.0
Table 1 (Tensile Strength (ASTM D 638))	2000.0
Table 1 (Shore D Hardness @ 24 Hrs (ASTM D 2240))	1000.0
Table 1 (Flexural Strength (ASTM D 790))	3000.0

596

National Test House (NWR), Jaipur

CSD/NTH/NWR/RPPT/Index No. 5020 - CSD Custom standard for Exo Anti Bacterial scrub big

CSD Custom standard for Exo Anti Bacterial scrub big

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Tests)	2000.0

597

National Test House (NWR), Jaipur

CSD/NTH/NWR/RPPT/Index No. 5023 - CSD Custom standard for Wonder Clean scrub pad

CSD Custom standard for Wonder Clean scrub pad

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Tests)	2000.0

598

National Test House (NWR), Jaipur

CSD/NTH/NWR/RPPT/Index No. 5014 - CSD Custom standard for Gala Kitchen scrubber green

CSD Custom standard for Gala Kitchen scrubber green

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Tests)	2000.0

599

National Test House (NWR), Jaipur

CSD/NTH/NWR/RPPT/Index No. 5013 - CSD Custom Standard for Glazze Scrub pad

CSD Custom Standard for Glazze Scrub pad

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Tests)	2000.0

600

National Test House (NWR), Jaipur

CSD/NTH/NWR/RPPT/Index No. 27496 - CSD Custom standard for KK Fashion heavy duty Hanger

CSD Custom standard for KK Fashion heavy duty Hanger

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Tests)	2000.0