NTH - Management Information System

Search by Standard No.

Reset

3858 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

481

National Test House (SR), Chennai

IS 8041 (1990) - Rapid hardening portland cement - Specific4tion (Second Revision)

Rapid hardening portland cement - Specific4tion (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Fineness)	1000.0
6.2 (Soundness-Lechatlier method)	500.0
6.3 (Setting time Initial)	250.0
6.3 (Setting time,Final)	250.0
6.4 (Compressive strength-(24 hours ±30 minutes))	2000.0
6.4 (Compressive strength-(72 hours ±1hour))	2000.0
5.1,Table 1 (Chemical requirements:)	4000.0

482

National Test House (WR), Mumbai

ASTM / IS - Flooring / Coating Material

Flooring / Coating Material

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- - (Hardness (on the lines of ASTM D 2240: 2015))	1000.0
- - (Compressive Strength (on the lines of ASTM D695:2015), Compressive Strength at Failure, MPa)	2000.0
- - (Flammability (On the lines of ASTM D 635: 2014),)	2000.0
- - (Impact Resistance (on the lines of ASTM D 2794),)	2000.0
- - (Taber Abrasion Test (on the lines of ASTM D4060),)	3000.0
- - (Pull off Adhesion against concrete (on the lines of ASTM D 4541))	5000.0
3 of IS 2386 (Loose Bulk Density, kg/m^3)	500.0
3 of IS 2386 (Part 3) (Compacted Bulk Density, kg/m^3)	500.0
9.5.3 of IS 1727 (Consistency (Flow table method), in mm)	1000.0
12.5 of IS 1237 (Water Absorption, in %)	1000.0
12.6 of IS 1237 (Wet Transverse Strength, in N/mm^2)	2000.0
7 of ASTM D 4541 (Pull off adhesion against concrete after 7 day, MPa)	5000.0
7 of ASTM D 4541 (Pull off adhesion against concrete after 1 day, MPa)	5000.0
7 of ASTM D 4541 (Pull off adhesion against concrete after 14 day, MPa)	5000.0
7 of ASTM D 4541 (Pull off adhesion against concrete after 28 day, MPa)	5000.0
8 (Compressive Strength (7 days) [ on the lines of ASTM C 579])	4000.0
8 (Flexural Strength (14 Days) [on the lines of ASTM C 580])	4000.0
8 (Compressive Strength (28 days) [on the lines of ASTM C 579])	4000.0
8 (Flexural Strength (7 days) [ on the lines of ASTM C 580])	4000.0
8 (Flexural Strength (14 Days) [on the lines of ASTM C 580])	4000.0
8 (Flexural Strength (28 days) [on the lines of ASTM C 580])	4000.0
8 (Tensile Strength [on the lines of ASTM C 307])	4000.0

483

National Test House (NR), Ghaziabad

NTH/NR/CUSTO/PAINT - ANTI SKID PAINT

ANTI SKID PAINT

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (SKID RESISTANCE TEST)	5000.0
2 (Impact resistant test)	2000.0
3 (Scratch Hardness test)	2000.0
3 (Water resistant test)	2000.0
4 (Fire Resistance test for 2 hours at Bunsen burner flame)	2000.0
5 (Fire Resistance test for 4 hours at Bunsen burner flame)	4000.0

484

National Test House (NR), Ghaziabad

Customised PU Paint/25 - Testing of PU Paint

Testing of PU Paint

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Skin formation)	2000.0
2 (Colour)	2000.0
3 (Solid Content %)	2000.0
4 (Density,g/ml)	2000.0

485

National Test House (NWR), Jaipur

IS 1664 (2002) - Mineral mixtures for supplementing cattle feeds - Specification (Fourth Revision)

Mineral mixtures for supplementing cattle feeds - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.3 (Total ash in moisture free sample)	500.0
6.3 (Arsenic (as As2O3))	1000.0
6.3 (Lead (as Pb))	1000.0
6.3 (Acid Insoluble Ash)	500.0
6.3 (Sulphur)	1000.0
6.3 (Zinc (as Zn))	500.0
6.3 (Cobalt (as Co))	1000.0
6.3 (Manganese (as Mn))	500.0
6.3 (Copper (as Cu))	500.0
6.3 (Iodine (as KI))	1000.0
6.3 (Iron Content)	500.0
6.3 (Salt as NaCl)	500.0
6.3 (Magnesium)	500.0
6.3 (Phosphorus)	500.0
6.3 (Calcium (as Ca))	500.0
6.3 (Moisture)	500.0

486

National Test House (ER), Alipore

CUSTOM PAINT ONSITE TESTING-1 (2024) - CUSTOM PAINT ONSITE TESTING-1

CUSTOM PAINT ONSITE TESTING-1

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Distinctness of Image (DOI))	10000.0

487

National Test House (ER), Alipore

MICR Cheque Paper Sensitization to chemicals and UV Light - MICR Cheque Paper Sensitization to chemicals and UV Light

MICR Cheque Paper Sensitization to chemicals and UV Light

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Test for Chemical Sensitization Ethanol)	450.0
2 (Test for Chemical Sensitization Acetone)	450.0
3 (Test for Chemical Sensitization Benzene)	450.0
4 (Test for Chemical Sensitization Chloroform)	450.0
5 (Test for Chemical Sensitization Ethylene Glycol")	450.0
6 (Test for Chemical Sensitization Bleaching powder)	450.0
7 (Test for Chemical Sensitization Ammonia solution 30%)	450.0
8 (Test for Chemical Sensitization Sodium meta bisulfite solution 10%)	450.0
9 (Test for Chemical Sensitization Oxalic acid solution 5%)	450.0
10 (Test for Exposure to UV lamp (for 24 Hours))	350.0

488

National Test House (ER), Alipore

ASTM B117 SALT SPRAY TEST PAINT LAB (2022) - ASTM B117 SALT SPRAY TEST

ASTM B117 SALT SPRAY TEST

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (ASTM B117 SALT SPRAY TEST FOR 96 HOURS)	5000.0
2 (ASTM B117 SALT SPRAY TEST FOR 72 HOURS)	3600.0

489

National Test House (NWR), Jaipur

IS 1964:2001 (2001) - Methods for Determination of Mass per Unit Lenght and Mass per Unit Area of Fabrics

Methods for Determination of Mass per Unit Lenght and Mass per Unit Area of Fabrics

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Method-A (Grammage of Fabric (GSM))	1000.0

490

National Test House (ER), Alipore

IS 1180 : Part 1 (2014) - Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) ( 501kVA TO 1000 kVA ) [501kVA TO 1000 kVA]

Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) ( 501kVA TO 1000 kVA )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
21.3(b) (Temperature Rise Test)	35000.0
21.2(a) (Measurement of Winding Resistance)	1000.0
21.2(b) (Measurement of voltage ratio and, check of voltage vector relationship)	1500.0
21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test))	15000.0
21.5.1.221.5.2.221.5.3.2 (Pressure test (routine))	5000.0
21.4.(d) (Adhesion by Tape Test)	5000.0
21.5.1.321.5.2.321.5.3.3 (Oil leakage test)	7000.0
21.2(c) (Measurement of impedance voltage (principal tapping), short circuit impedance and load loss (At 50% and 100% load))	7000.0
7.9 & 8.9 (Measurement of Permissible flux density and over fluxing)	20000.0
21.4( c) (Measurement of No load current at 112.5 percent voltage)	2000.0
21.2(e) (Measurement of insulation resistance)	1500.0
21.2(d) (Measurement of no Load and loss and current)	6000.0
21.2(f) (lnduced Over Voltage withstand test)	3000.0
21.4(a) (Determination of sound levels)	6000.0
21.4( e) (BDV of Oil in the transformer)	10000.0
21.2(g) (AC High Voltage Withstand Test)	2500.0
As per CBIP Manual No. 317 Cl. (Harmonics of No-load Current)	12000.0
As per CBIP No. 317 Cl. 3.10 (Zero Sequence Impedance Measurement)	5000.0
As per CBIP No. 317 Cl. 3.10 (Magnetic Balance Test)	5000.0
N.A. (Unbalance Current)	5000.0

491

National Test House (ER), Alipore

IS 1180 : Part 1 (2014) - Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) ( 201kVA TO 500kVA ) [201kVA TO 500kVA]

Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) ( 201kVA TO 500kVA )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
21.3(b) (Temperature Rise Test)	30000.0
21.2(a) (Measurement of Winding Resistance)	1000.0
21.2(b) (Measurement of voltage ratio and, check of voltage vector relationship)	1500.0
21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test))	15000.0
21.5.1.221.5.2.221.5.3.2 (Pressure test (routine))	5000.0
21.4.(d) (Adhesion by Tape Test)	5000.0
21.5.1.321.5.2.321.5.3.3 (Oil leakage test)	7000.0
21.2(c) (Measurement of impedance voltage (principal tapping), short circuit impedance and load loss (At 50% and 100% load))	6000.0
7.9 & 8.9 (Measurement of Permissible flux density and over fluxing)	15000.0
21.4( c) (Measurement of No load current at 112.5 percent voltage)	2000.0
21.2(e) (Measurement of insulation resistance)	1000.0
21.2(d) (Measurement of no Load and loss and current)	5500.0
21.2(f) (lnduced Over Voltage withstand test)	2500.0
21.4(a) (Determination of sound levels)	6000.0
21.4( e) (BDV of Oil in the tranformer)	10000.0
21.2(g) (AC High Voltage Withstand Test)	2500.0
As per CBIP Manual No. 317 Cl (Harmonics of No-load Current)	12000.0
As per CBIP No. 317 Cl. 3.10 (Zero Sequence Impedance Measurement)	4000.0
As per CBIP No. 317 Cl. 3.10 (Magnetic Balance Test)	4000.0
N.A. (Unbalance Current)	4000.0

492

National Test House (ER), Alipore

IS 1180 : Part 1 (2014) - Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) Three Phase ( 1 kVA to 200KVA ) [1kVA to 200KVA]

Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) Three Phase ( 1 kVA to 200KVA )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
21.3(b) (Temperature Rise Test)	24000.0
21.2(a) (Measurement of Winding Resistance)	1000.0
21.2(b) (Measurement of voltage ratio and, check of voltage vector relationship)	1500.0
21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test))	10000.0
21.5.1.221.5.2.221.5.3.2 (Pressure test (routine))	5000.0
21.4.(d) (Adhesion by Tape Test)	5000.0
21.5.1.321.5.2.321.5.3.3 (Oil leakage test)	7000.0
21.2(c) (Measurement of impedance voltage (principal tapping), short circuit impedance and load loss (At 50% and 100% load))	5000.0
7.9 & 8.9 (Measurement of Permissible flux density and over fluxing)	10000.0
21.4( c) (Measurement of No load current at 112.5 percent voltage)	2000.0
21.2(e) (Measurement of insulation resistance)	1000.0
21.2(d) (Measurement of no Load and loss and current)	5500.0
21.2(f) (lnduced Over Voltage withstand test)	2500.0
21.4(a) (Determination of sound levels)	5000.0
21.4( e) (BDV of Oil in the tranformer)	10000.0
21.2(g) (AC High Voltage Withstand Test)	2500.0
As per CBIP Pub No. 317 Cl. 3.17 (Magnetic Balance Test)	3000.0
As per CBIP Manual No. 317 Cl (Harmonics of No-load Current)	10000.0
As per CBIP No. 317 Cl. 3.10 (Zero Sequence Impedance Measurement)	3000.0
N.A. (Unbalance Current)	3000.0

493

National Test House (ER), Alipore

IS 1180 : Part 1 (2014) - Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) Single Phase ( 1kVA to 100kVA ) [1kVA to 100kVA]

Outdoor Type Oil Immersed Distribution Transformers - Specification Part 1 Mineral Oil Immersed (Fourth Revision) Single Phase ( 1kVA to 100kVA )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
21.3(b) (Temperature Rise Test)	15000.0
21.2(a) (Measurement of Winding Resistance)	700.0
21.2(b) (Measurement of voltage ratio and, check of voltage vector relationship)	700.0
21.5.1.121.5.2.121.5.3.1 (Vacuum Pressure (Type Test))	6000.0
21.5.1.221.5.2.221.5.3.2 (Pressure test (routine))	3500.0
21.4.(d) (Adhesion by Tape Test)	5000.0
21.5.1.321.5.2.321.5.3.3 (Oil leakage test)	5000.0
21.2(c) (Measurement of impedance voltage (principal tapping), short circuit impedance and load loss (At 50% and 100% load))	3000.0
7.9 & 8.9 (Measurement of Permissible flux density and over fluxing)	6500.0
21.4( c) (Measurement of No load current at 112.5 percent voltage)	2000.0
21.2(e) (Measurement of insulation resistance)	700.0
21.2(d) (Measurement of no Load and loss and current)	3000.0
21.2(f) (lnduced Over Voltage withstand test)	1200.0
21.4(a) (Determination of sound levels)	5000.0
21.4( e) (BDV of Oil in the tranformer)	10000.0
21.2(g) (AC High Voltage Withstand Test)	1200.0
As per CBIP Pub No. 317 Cl. 3.17 (Magnetic Balance Test)	2000.0
As per CBIP Manual No. 317 Cl (Harmonics of No-load Current)	6000.0
As per CBIP No. 317 Cl. 3.10 (Zero Sequence Impedance Measurement)	2000.0
N.A. (Unbalance Current)	2000.0

494

National Test House (ER), Alipore

IS 9862 (2017) - Specification for ready mixed paint, brushing, bituminous, black, acid, alkali, water and chlorine resistlng (First Revision)

Specification for ready mixed paint, brushing, bituminous, black, acid, alkali, water and chlorine resistlng (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (Lead Restriction as metallic lead)	1500.0
4.3 table 1(i) (Drying time a) Hard dry)	1500.0
4.3 table 1(ii) (Consistency)	1000.0
4.3 table 1(iii) (Finish)	500.0
4.3 table 1(iv) (Wet opacity meter square per liter)	500.0
4.3 table 1(v) (Mass, kg/10 Litres,)	1000.0
4.3 table 1(vi) (Colour)	200.0
4.3 table 1(vii) (Flexibility and adhesion (bend test of the film with 6.25 dia Mandrel in type 1 apparatus))	1000.0
4.3 table 1(viii) (Stripping test ( By scratch hardness tester))	1000.0
4.3 table 1(ix) (Flash point deg.C)	1000.0
4.3 table 1(x) (Volatile matter content, percent by mass,)	1000.0
4.3 table 1(xi) (Resistance to humidity under conditions of condensation)	2000.0
4.3 table 1(xii) (Resistance to water)	1000.0
4.3 table 1(xiii) (Resistance to acid (Dilute Sulphuric Acid 1: 20 (v/v))	1500.0
4.3 table 1(xiv) (Resistance to alkali (Sodium Carbonate 5 % m/v Solution))	1500.0
4.3 table 1(xv) (Resistance to chlorine (0.05 percent of chlorine (m/v).)	1000.0
4.3 table 1(xvi) (Water content (if water is suspected to be present), percent by mass,)	1500.0
4.3 table 1(xvii) (Keeping properties(12 Months))	5000.0

495

National Test House (ER), Alipore

IS 158 (2015) - Ready mixed paint, brushing, bituminous, black, acid, alkali and heat resisting - Specification (Fourth Revision)

Ready mixed paint, brushing, bituminous, black, acid, alkali and heat resisting - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.3,xvi (Keeping properties)	500.0
4.3,xv (Flash Point)	500.0
4.3,xiv (Resistance to heat)	200.0
4.3,xiii (Resistance to alkali)	1000.0
4.3,xii (Resistance to acid)	2000.0
4.3,xi (Volatile matter, percent by mass)	200.0
4.3,x (Protection against corrosion under conditions of condensation)	2000.0
4.3, ix (Stripping Test)	1000.0
4.3, viii (Flexibility and adhesion, bend test with 6.25 mm dia mandrel and type 1 apparatus)	1000.0
4.3,vii (Water Content,percent by mass)	100.0
4.3,vi (Mass, kg/10litre)	100.0
4.3,v (Colour)	100.0
4.3,iv (Wet opacity)	500.0
4.3,iii (Finish)	100.0
4.3,ii (Consistency)	1000.0
4.3,i (Drying time : Hard dry)	1000.0
4.2 (Lead Restrictions)	1500.0

496

National Test House (ER), Alipore

IS 5083 (1988) - Specification for knifing stopper (Second Revision)

Specification for knifing stopper (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.10.ii (Keeping properties)	5000.0
3.10.i (Water content)	1200.0
3.9 (Drying T i m e )	1200.0
3.7 (Hold Out Properties)	2000.0
3.6 (Rubbing Properties)	2000.0
3.5 (Stopping Properties)	2000.0
3.4 (compatibility)	1200.0
3.3 (Consistency )	1200.0
3.2 (Composition )	1200.0
3.1 (Form and Condition)	1200.0

497

National Test House (ER), Alipore

IS 8662 (2004) - Enamel, synthetic exterior: (A) undercoating (B) finishing, for railway coaches - Specification (Second Revision)

Enamel, synthetic exterior: (A) undercoating (B) finishing, for railway coaches - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.6.xiii (Keeping properties)	5000.0
6.6.xii (Accelerated storage stability test, at 60 degC, 96 h)	3000.0
6.6.xi.b (Phthalic anhydride content of non-volatile vehicle)	3000.0
6.6.xi.a (Volume solids)	3000.0
6.6.x (Flash point)	1500.0
6.6.ix (Flexibility and adhesion)	1200.0
6.6.viii (Scratch hardness after 48 h air drying (1 000 g weight))	1500.0
6.6.vii (Water content (if suspected to be present) - IS 101 (Part 2/Sec 1))	1200.0
6.6.vi (Colour)	1200.0
6.6.v (Fineness of grind,)	1200.0
6.6.iv.b (Gloss , 60 deg)	1500.0
6.6.iv.a (Fnish)	1200.0
6.6.iii.d (Drying time Tack Free)	1200.0
6.6.iii.c (Hard dry at 70 DegC with 15 min flash- off time)	1200.0
6.6.iii.b (Drying time Hard Dry)	1200.0
6.6.iii.a (Drying time Surface Dry)	1200.0
6.6.ii (Mass, in kg/101itres)	1500.0
6.6.i.b (Viscosity byFord cup No. 4)	1200.0
6.6.i.a (Consistency)	1200.0
6.5 (Resistance to Alkali (for Finishing Only)	1500.0
6.4 (Resistance to Acid (for Finishing Only))	1500.0
6.3 (Durability( Normal Outdoor Exposer))	10000.0
6.2.6 (Application Properties)	1200.0
6.2.5 (Thinning Properties)	1200.0
6.2.4 (Skin Formation)	1200.0
6.2.3 (Freedom from Coarse Particles)	1200.0
6.2 (Condition in Container)	1200.0
6.1 (Composition)	1200.0
CLAUSE-4.5.2,Table-1 (Dry Film Thickness(DFT))	1500.0
6.7 (Pigment content)	1000.0
1 (1)	-

498

National Test House (ER), Alipore

IS 133 (2013) - ENAMEL, INTERIOR : (A) UNDERCOATING (B) FINISHING

ENAMEL, INTERIOR : (A) UNDERCOATING (B) FINISHING

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

499

National Test House (ER), Alipore

IS 341 (2016) - Black japan, types a, b and c - Specification (Second Revision)

Black japan, types a, b and c - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
x) (Keeping properties)	5000.0
ix) (Flash point)	1200.0
viii) (Resistance to heat (for 2 h) (for Type C))	1200.0
vii) (Resistance to kerosene for Types B and C))	1500.0
vi) (Stripping test)	1200.0
b) (Scratch hardness (load 1 000g))	1500.0
a) (Bend test (with 6.25 mm dia mandrel and in type 1 apparatus))	1500.0
iv) (Ash content percent by mass)	1200.0
iii) (Volatile matter content, percent by mass, Max)	2000.0
ii) (Finish)	1200.0
5.6 Table i) b) (b) Hard dry)	1500.0
5.6 Table i) a) (a) surface dry)	1200.0
5.5 (Durability)	8000.0
5.4 (Lead Restriction)	2500.0
5.3 (Reaction with Varnish, Exterior)	1200.0
5.2 (Reaction with White Paint)	1000.0
5.1 (Composition)	2000.0

500

National Test House (ER), Alipore

IS 2339 (2013) - Aluminium paints for general purposes - Specification (First Revision)

Aluminium paints for general purposes - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.3 ix (Keeping properties)	5000.0
5.3viii (Flash point)	2000.0
5.3 vii (Resistance to humidity under condition of condensation)	3000.0
5.3 vi (Flexibility and adhesion, bend test usingType 1 apparatus and 6.25 mm dia Mandrel)	200.0
5.3 v (Wet Opacity)	500.0
5.3 iv (Mass)	200.0
5.3 iii (Finish)	200.0
5.3 ii (Consistency)	200.0
5.3 i (Drying Time Hard dry)	200.0
5.2 (Lead Resistrction)	500.0
5.1.1 (Leafing Value)	1500.0
5.1 (Compostion)	200.0
5.2 (Lead Restriction)	500.0
Table 1 Cl 3 (Form & Condition)	1000.0
Table 1 Cl 3 (Grease content)	1500.0
Table 1 Cl 3 (Residue on Sieve)	1000.0
Table 1 Cl 3 (Volatile matters)	500.0
Table 1 Cl 3 (Acid Value)	500.0

501

National Test House (ER), Alipore

Customized Specification for Paint Coatings NTH ER 2024 (-) - Customized Specification for Paint Coatings NTH ER 2024

Customized Specification for Paint Coatings NTH ER 2024

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (PULL OF ADHESION ,MPa ASTM D4541)	5000.0
2 (HUMIDITY RESISTANCE FOR 3000 hrs)	90000.0
3 (HUMIDITY RESISTANCE FOR 1000 hrs ASTM D4585)	50000.0
4 (SALT SPRAY TEST FOR 2000 hrs ASTM B 117)	100000.0
5 (UV RESISTANCE FOR 1000 hrs (ASTM G 154)	50000.0
6 (SALT SPRAY TEST FOR 5000 hrs ASTM B 117)	250000.0
7 (TENSILE STRENGTH, MPa ASTM D 638)	2000.0
8 (ELONGATION % ASTM D 638)	1000.0
9 (WATER IMMERSION TEST for 14 days)	5000.0
11 (SALT SPRAY TEST FOR 2500 hrs ASTM B 117)	125000.0
10 (UV RESISTANCE FOR 500 hrs (ASTM G 154)	25000.0
12 (SALT SPRAY TEST FOR 1000 hrs ASTM B 117)	50000.0
13 (Dry film Thickness(DFT),in microns)	1200.0
15 (Scratch hardness (at the load of 1000gm) IS: 101 (part 5 / Sec 1) 1988 (Reaffirmed 2019))	1200.0
16 (Adhesion of film ASTM 3359 (Circular Blade cross cut) /IS:101.5.2.1988)	2000.0
17 (Finish IS:101 (Part 3/ sec 4) 1987 (Reaffirmed 2019))	1000.0
18 (Accelerated Weathering QUV test for 1000 hours (ASTM D 4587) (Gloss Loss, Colour Change))	50000.0
19 (Resistance to petrol benzol mixture (To pass 500g scratch hardness after the exposure) jSS-8010-82:2012, Appendix - D)	2000.0
36 (Abrasion Resistance (ASTM D 4060) 1000g load/CS 17/1000 Cycle)	4000.0
33 (Outdoor Durability Test 25 days JSS-8010-82 2012.Annex G)	20000.0
52 (SALT SPRAY TEST FOR 500 hrs ASTM B 117)	25000.0
2 (HUMIDITY RESISTANCE FOR 3000 hrs)	90000.0
53 (Volume solid)	2000.0
54 (Specific Gravity (Base))	1200.0
55 (Specific Gravity (Catalyst))	1200.0
56 (Specific Gravity (Mixed))	1200.0
57 (Pencil Hardness)	1500.0
58 (Salt Spray Resistance (3000 hours))	150000.0
59 (Non Volatile matter (Base))	1200.0
60 (Non Volatile matter (Catalyst))	1200.0
61 (Non Volatile matter (Mixed))	1200.0
62 (Drying Time)	1200.0
63 (Pot Life at 30 Deg.C)	1200.0
34 (Impact Resistance test ASTM 2794)	1500.0
51 (Accelerated Weathering Test (QUV) for 2000hrs)	100000.0
64 (Cathodic Disbondment)	5000.0
65 (Water Immersion)	10000.0
66 (Flexibility, Mandrel Test (6.25 mm))	1200.0
67 (Water Resistance, Immersion 7 days)	5000.0
68 (Immersion in acid, alkali and salt solution, 7 days)	6000.0
69 (Scratch Hardness)	1200.0
70 (Viscosity measurement (Brookfield))	1200.0
71 (Surface coverage area)	1200.0
72 (Paint application)	1200.0
50 (Appearance)	1200.0
73 (Water Vapour Transmission (ASTM E 96))	5000.0
49 (color)	1200.0
42 (Gloss Value)	1200.0
74 (Viscosity (IS 101 part 1, sec 5))	1200.0
43 (Dry Film Thickness (DFT))	1200.0
75 (Holiday Detection)	10000.0
76 (Impact Resistance)	1500.0
77 (QUV weathering test (40 days))	48000.0
78 (Salt Spray Test (40 days))	48000.0
79 (100 - Days Acid Test (10% Sulphuric acid, Immersion methods))	1500.0
80 (Salt Spray Test 1000hrs)	50000.0
81 (Curing Test (MEK Test))	2000.0
18 (Accelerated Weathering QUV test for 1000 hours (ASTM D 4587) (Gloss Loss, Colour Change))	50000.0
81 (Curing Test (MEK Test))	2000.0
83 (Salt Spray Test -96Hrs)	4800.0
84 (Corrosion Test-96hrs)	2000.0
85 (Appearance of liquid paint)	1200.0
86 (Specific gravity)	1200.0
87 (Viscosity at 30 deg.C (Poise))	1200.0
88 (Non Volatile matter)	1200.0
89 (PH of paint)	1200.0
90 (Appearance & finish of dried paint film)	1200.0
82 (Volume Solid a) Epoxy Sealer Coat b) Intermediate Coat c) Finish Coat)	6000.0
91 (Protection against corrosion under condition of condensation (1000 hrs))	18000.0
45 (Flash Point in Deg c (IS 101 part 1 sec 6))	1200.0
92 (Consistency)	1200.0
93 (Over-coating Interval)	1200.0
96 (Accelerated Weathering Test QUV 360 hrs)	18000.0
97 (Taber Abrasion Test (CS 10 wheel))	5000.0

502

National Test House (ER), Alipore

Custom Food Grade Epoxy Paint (2024) - Custom Food Grade Epoxy Paint

Custom Food Grade Epoxy Paint

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Adhesion (Mpa))	2500.0
2 (Specific gravity Comp. A & Comp. B)	2400.0
3 (Pot life)	1200.0
4 (Solid Content)	1200.0
5 (Color)	1200.0
6 (Chemical Resistance (All Test))	7500.0
7 (Drinking Water Performance Test for Heavy metals)	10000.0
8 (Dry film Thickness per coat (microns))	1200.0

503

National Test House (SR), Chennai

IS 12436:1988 - Specification for Preformed Rigid Polyurethane (PUR) and Polyisocyanurate(PIR) foams for thermal insulation

Specification for Preformed Rigid Polyurethane (PUR) and Polyisocyanurate(PIR) foams for thermal insulation

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
A-2 (Density(as per IS 7888:1976):)	1000.0

504

National Test House (ER), Alipore

MMDTS19041 REV-02 DATE 01.01.2024 - -

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Cl 4 Table 1 Sr No 1 (Drying timeat25±2˚C a. Surface dry, max IS:101-86 (Part3/Sec.1), Reaffirmed 2017 or latest)	250.0
Cl 4 Table 1 Sr No 1 (Drying time at2 5±2˚C b) Curing time IS:101-86 (Part3/Sec.1), Reaffirmed 2017 or latest)	250.0
Cl 4 Table 1 Sr No 2 (Consistency IS:101-89 (Part1/Sec.5), Reaffirmed 2019 or latest)	250.0
Cl 4 Table 1 Sr No 3 (Finish IS:101-87 (Part 3/Sec.4), Reaffirmed 2019 or latest)	250.0
Cl 4 Table 1 Sr No 4 (Colour IS:101-89 (Part 4/Sec.2), Reaffirmed 2021 or latest)	100.0
Cl 4 Table 1 Sr No 5 (Dry film thickness per coat, by Spray /dipping roller/wipes IS:101-89 (Part3/Sec.2 ) Reaffirmed 2019 or latest version ASTM D7091 (latest version)/by DFT gauge)	250.0
Cl 4 Table 1 Sr No 7 (a )Scratch hardness(at1.5 Kg. load) IS:101-88 (Part5/Sec.2), Reaffirmed 2014 or Latest Version b)Pencil Hardness test ASTM D3363 or Latest Version)	3500.0
Cl 4 Table 1 Sr No 8 (Flexibility & Adhesion (6.25 mm mandrel) IS:101-88 (Part5/Sec.2),Reaffirmed 2014 or Latest Version)	250.0
Cl 4 Table 1 Sr No 9 (Flash Point deg C IS: 101-87(Part 1/ Sec.6),Reaffirmed 2019 or latest version)	250.0
Cl 4 Table 1 Sr No 10 (Resistance to salt spray For 3000 hours ASTM B-117/2019 or latest version)	125000.0
Cl 4 Table 1 Sr No 11 (Protection against Corrosion under condition of Condensation for 2500 hours IS:101-88(Part6/Sec.1),Reaffirmed 2015 or latest)	100000.0
Cl 4 Table 1 Sr No 13 (Spreading & Covering surface area Capacity, .@ DFT ≥5microns Appendix-I of RDSO specification no. M&C/ PCN 100/ 2018)	500.0
Cl 4 Table 1 Sr No 14 (Resistance to chemicals For 24 hours 1) 25% caustic soda solution (w/v) 2) 30% (V/V) H2SO4 IS:101-89 (Part7 /Sec.2) RA 2020 or latest)	2000.0
Cl 4 Table 1 Sr No 15 (Mass in kg/ 10litres, IS:101-87 (Part1/Sec.7)Reaffirmed 2020 or latest)	500.0
Cl 4 Table 1 Sr No 16 (Impact resistance test height 31 Inch, load 6.45pound (200 Inch pound load ASTM2794-93 or latest)	2000.0
Cl 4 Table 1 Sr No 17 (Resistance to tap Water or raw water for 3000 hours IS: 101-90 (Part7/Sec.2) Reaffirmed- 2005 or latest)	7500.0
Cl 4 Table 1 Sr No 18 (Abrasion Resistance test 1000 cycle with CS-17 wheel & 1 kg load ASTMD-4060 or latest)	2500.0
Cl 4 Table 1 Sr No 19 (Glossat60 angle of incidence IS:101-88 (Part 4/ Sec.4) Reaffirmed-2020 or latest)	1500.0
Cl 4 Table 1 Sr No20 (Anti-graffiti properties ASTM D-6578/ 13 /(latest version) Marker:Edding 3000)	7500.0
Cl 4 Table 1 Sr No 21 (Durability Test– Accelerated weathering test: QUV 4 hours and 4 hours Condensation alternatively, (750hrs), Temp. 50 O C as per ASTM G154-or latest)	25000.0

505

National Test House (ER), Alipore

RDSO M&C/ PCN/ 100/ 2018 (2018) - Specification for Epoxy Cum Polyurethane Painting System (Two Pack) for the Exterior Painting of Railway Coaches

Specification for Epoxy Cum Polyurethane Painting System (Two Pack) for the Exterior Painting of Railway Coaches

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Chapter V (Table 1) (Abrasion resistance-1000 cycles)	3000.0
Chapter V (Table 1) (Humidity test.)	11000.0
Chapter V (Table 1) (Durability Tests : Accelerated weathering test)	110000.0
Chapter V (Table 1) (Accelerated Tests Resistance to water)	1500.0
Chapter V (Table 1) (Accelerated Tests Resistance to solvents)	1500.0
Chapter V (Table 1) (Accelerated Tests Resistance to oil)	1500.0
Chapter V (Table 1) (Accelerated Tests Resistance to 20% caustic potash (weight by volume))	1500.0
Chapter V (Table 1) (Accelerated Tests (a) Resistance to 30% Sulphuric acid (weight by volume))	1500.0
Chapter V (Table 1) (Gloss at 60 degree angle of incidence)	1200.0
Chapter V (Table 1) (Viscosity (Efflux time by Ford cup No. 4 ) at 27 degree C)	1200.0
Chapter V (Table 1) (Fineness of grind)	1200.0
Chapter V (Table 1) (Theoretical Spreading rate)	1200.0
Chapter V (Table 1) (Pot life(After induction time)ii) 40 ± 2 Deg C)	2000.0
Chapter V (Table 1) (Pot life (After induction time) at i) 27 ± 2 Deg C)	1500.0
Chapter V (Table 1) (Mass in Kg/10 litres)	1200.0
Chapter V (Table 1) (Keeping Properties for both the packs)	5000.0
Chapter V (Table 1) (Flash Point (b) Component B)	1200.0
Chapter V (Table 1) (Flash Point (a) Component A)	1200.0
Chapter V (Table 1) (Flexibility & Adhesion (6.25mm mandrel))	1200.0
Chapter V (Table 1) (Scratch hardness (1.5 Kg LOAD))	1200.0
Chapter V (Table 1) (Volume solids)	1200.0
Chapter V (Table 1) (Dry film thickness/Per coat)	1200.0
Chapter V (Table 1) (Colour)	1200.0
Chapter V (Table 1) (Finish)	1200.0
Chapter V (Table 1) (Consistency)	1200.0
Chapter V (Table 1) (Drying time c) Hard Dry at 70 Deg C)	1200.0
Chapter V (Table 1) (Drying time b) Hard Dry)	1200.0
Chapter III/Cl. 2.2.1 (Drying time a) Surface Dry)	1200.0
Chapter II/Cl. 3.2.1.2 (Pigment Content)	1500.0
Chapter II/Cl. 4.1 (Protection against corrosion under condition of condensation)	9000.0
Chapter II/Cl. 4.1 (Resistance to salt spray)	21000.0

506

National Test House (ER), Alipore

MMDTS 18034 (Rev. 04) (2019) - Technical Specification for PU based Wet -On- Wet Applicable on Exterior Painting System for LHB Types Coaches.

Technical Specification for PU based Wet -On- Wet Applicable on Exterior Painting System for LHB Types Coaches.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 ((Anti Graffiti test ASTM D-6578))	5000.0
4 (DFT(Dry Film Thickness))	1200.0
3 (Chemical Resistance 1)30% H2SO4 2)20% NaOH)	2000.0

507

National Test House (WR), Mumbai

IS 9862 (2017) - Specification for ready mixed paint, brushing, bituminous, black, acid, alkali, water and chlorine resistlng (First Revision)

Specification for ready mixed paint, brushing, bituminous, black, acid, alkali, water and chlorine resistlng (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (Lead Restriction as metallic lead)	1500.0
4.3 table 1(i) (Drying time a) Hard dry)	1500.0
4.3 table 1(ii) (Consistency)	1000.0
4.3 table 1(iii) (Finish)	500.0
4.3 table 1(iv) (Wet opacity meter square per liter)	500.0
4.3 table 1(vi) (Colour)	200.0
4.3 table 1(vii) (Flexibility and adhesion (bend test of the film with 6.25 dia Mandrel in type 1 apparatus))	1000.0
4.3 table 1(viii) (Stripping test ( By scratch hardness tester))	1000.0
4.3 table 1(ix) (Flash point deg.C)	1000.0
4.3 table 1(x) (Volatile matter content, percent by mass,)	1000.0
4.3 table 1(xi) (Resistance to humidity under conditions of condensation)	2000.0
4.3 table 1(xii) (Resistance to water)	1000.0
4.3 table 1(xiii) (Resistance to acid (Dilute Sulphuric Acid 1: 20 (v/v))	1500.0
4.3 table 1(xiv) (Resistance to alkali (Sodium Carbonate 5 % m/v Solution))	1500.0
4.3 table 1(xv) (Resistance to chlorine (0.05 percent of chlorine (m/v).)	1000.0
4.3 table 1(xvi) (Water content (if water is suspected to be present), percent by mass,)	1500.0
4.3 table 1(xvii) (Keeping properties(12 Months))	5000.0

508

National Test House (NR), Ghaziabad

Nitrile Rubber - Nitrile Rubber

Nitrile Rubber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's requirement (Thickness)	1000.0
Firm's requirment (Density)	1000.0
Firm's requirement (Fire Rating)	4000.0

509

National Test House (NR), Ghaziabad

IS/IEC 62271 : Part 103 (2011) - High - Voltage switchgear and controlgear: Part 103 switches for rated voltages above 1 kV up to and including 52 kV

High - Voltage switchgear and controlgear: Part 103 switches for rated voltages above 1 kV up to and including 52 kV

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.102.2.1 (Mechanical Endurance Test for Class M1 Switches)	100000.0
6.2.6.1 of IEC 62271-1 (Power Frequency Voltage Test)	10000.0

510

National Test House (NR), Ghaziabad

IS/IEC 62271 : PART 100 (2008) - High - Voltage Switchgear and Controlgear Part 100 Alternating - Current Circuit - Breakers

High - Voltage Switchgear and Controlgear Part 100 Alternating - Current Circuit - Breakers

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.101.1, 7.101.2.1, 7.101.2.2, 7.101.2.3 (Circuit Breaker Endurance Test for Class M2 10000 Operations)	100000.0