NTH - Management Information System

Search by Standard No.

Reset

4064 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

3811

National Test House (ER), Kolkata

IS 303 (1989) - Plywood for General Purposes -

Plywood for General Purposes -

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
11.2.2 (Glue Adhesion-Mycological Test -IS 1734 (Part 7):1983 & IS 1734 (Part 5):1983)	1500.0
11.2.1 (Glue Adhesion-Water Resistance Test- IS 303:1989 & IS 1734 (Part 5):1983)	2000.0
11.4 & Table 4 (Static Bending Strength-IS 1734 (Part 11):1983)	3000.0
11.3 (Moisture content-IS 1734 (Part 1):1983)	1000.0
9 (Workmanship & Finish-IS 303:1989)	500.0
8 & Table 3 (Dimensions and Tolerances-IS 303:1989, Annex C)	2000.0

3812

National Test House (NR), Ghaziabad

IS 269 (2015) - Ordinary portland cement - Specification (Sixth Revision)

Ordinary portland cement - Specification (Sixth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1, Table2, Sl No 8 (Alkali content IS 4032:1985)	1000.0
6.1, Table2, Sl No 7 (Chloride content IS 4032:1985)	500.0
6.1, Table2, Sl No 6 (Loss on ignition IS 4032:1985)	600.0
6.1, Table2, Sl No 5 (Total Sulphur content percent by mass, IS 4032:1985)	500.0
6.1, Table2, Sl No 4 (Magnesia IS 4032:1985)	600.0
6.1, Table2, Sl No 3 (Insoluble residue, IS 4032:1985)	600.0
6.1, Table2, Sl No 2 (Ratio of percentage of alumina to that of iron oxide IS 4032:1985)	600.0
6.1, Table2, Sl No 1 (Ratio of percentage of lime to percentages of silica, alumina and iron oxide, IS 4032 : 1985)	600.0
7, Table 3, Sl No 4c (Compressive strength, MPa (c) 672 ± 4 h IS 4031 (Part 6):1988)	1000.0
7, Table 3, Sl No 4b (Compressive strength, MPa (b) 168 ± 2 h IS 4031 (Part 6):1988)	1000.0
7, Table 3, Sl No 4a (Compressive strength, MPa-(a) 72 ± 1 h IS 4031 (Part 6):1988)	1000.0
7, Table 3, Sl No 3b (Setting time: b) Final, IS 4031 (Part 5):1988)	250.0
7, Table 3, Sl No 3a (Setting time: a) Initial IS 4031 (Part 5):1988)	250.0
7, Table 3, Sl No 2b (Soundness b) By autoclave test method IS 4031 (Part 3):1988)	1000.0
7, Table 3, Sl No 2a (Soundness: a) By Le-Chatelier method, IS 4031 (Part 3):1988)	500.0
7, Table 3, Sl No 1 (Fineness IS 4031 (Part 2):1999)	1000.0
4031 Part (4) (Consistency, %)	500.0

3813

National Test House (SR), Chennai

IS 8084 (1976) - Specification for interconnecting bus - Bars for ac voltage above 1 kV up to and including 36 kV

Specification for interconnecting bus - Bars for ac voltage above 1 kV up to and including 36 kV

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (@250A)	12500.0
4 (@500A)	15000.0
4 (@1000A)	17500.0
4 (@1500A)	20000.0
4 (@2000A)	25250.0
4 (@2500A)	25000.0
4 (@3000A)	27500.0
4 (@3500A)	30000.0

3814

National Test House (SR), Chennai

IS 9000 : Part V : Sec 2 (1981) - Electric and Electronics items (size less than 1 cubic meter)

Electric and Electronics items (size less than 1 cubic meter)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Damp (Cycle ) Test)	20000.0

3815

National Test House (SR), Chennai

IS 9000 : Part V : Sec 1 (1981) - Electric and Electronics items (size less than 1 cubic meter)

Electric and Electronics items (size less than 1 cubic meter)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Damp (Cycle ) Test)	20000.0

3816

National Test House (SR), Chennai

IS 9000 : Part II : Sec 2 (1977) - Electric and Electronics items (size less than 1 cubic meter)

Electric and Electronics items (size less than 1 cubic meter)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Cold Test for non heating dissipating items with sudden change of temperature)	20000.0

3817

National Test House (SR), Chennai

IS 9000 : Part III : Sec 5 (1977) - Electric and Electronics items (size less than 1 cubic meter)

Electric and Electronics items (size less than 1 cubic meter)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Dry Heat Test)	10000.0

3818

National Test House (SR), Chennai

IS 9000 : Part III : Sec 4 (1977) - Electric and Electronics items (size less than 1 cubic meter)

Electric and Electronics items (size less than 1 cubic meter)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Dry Heat Test)	20000.0

3819

National Test House (SR), Chennai

IS 9000 : Part III : Sec 3 (1977) - Electric and Electronics items (size less than 1 cubic meter)

Electric and Electronics items (size less than 1 cubic meter)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Dry Heat Test)	20000.0

3820

National Test House (SR), Chennai

IS 9000 : Part III : Sec 2 (1977) - Electric and Electronics items (size less than 1 cubic meter)

Electric and Electronics items (size less than 1 cubic meter)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Dry Heat Test)	20000.0

3821

National Test House (SR), Chennai

IS 1554 : Part 1 (1988) - SPECIFICATION FOR PVC INSULATED ( HEAVY DUTY ) ELECTRIC CABLES

SPECIFICATION FOR PVC INSULATED ( HEAVY DUTY ) ELECTRIC CABLES

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
15.1 (Type Test - Single Core Non-Mining)	20000.0
15.1 (Type Test - Two core Non-Mining)	22000.0
15.1 (Type Test (Two core FRLS Cable))	40000.0
18.2 (Marking)	2000.0
17.3 (Cable identification)	100.0
17.1 (Manufacturer identification)	100.0
15.2 (Acceptance tests - Two core Non-Mining)	13500.0
15.2 (Acceptance tests(Single core FRLS Cable))	11500.0
15.1.1 & 15.2.1 (FRLSH for all type of samples)	20000.0
15.2 (h) (High Voltage AC)	1000.0
15.1(a).1 (Annealing test ( for copper ))	1000.0
15.1 (h) (Flammability test-Sheath)	3500.0
15.1 (h) (Flammability test-Insulation)	250.0
15.1 (e) (Insulation resistance constant at maximum rated temperature )	1000.0
15.1 (e) (Volume resistivity at maximum rated temperature)	500.0
15.1 (e) (Insulation resistance constant at ambient temperature)	500.0
15.1 (e) (Volume resistivity at ambient temperature )	500.0
15.1 (d) 7 (Thermal stability-Sheath)	500.0
15.1 (d) 7 (Thermal stability-Insulation)	500.0
15.1 (d) 3 (Shrinkage test-Sheath)	500.0
15.1.1.c2 (a) (Oxygen index )	3500.0
15.1 (e) (Insulation resistance constant at ambient temperature)	500.0
15.1 (e) (Insulation resistance constant at maximum rated temperature )	500.0
15.1.1.c1 (d) (Temperature index)	3500.0
15.2.1.c1 (a) (Oxygen index )	3500.0
15.2.1.c2 (e) (Smoke density rating)	3500.0
15.2.1.c2 (d) (Halogen acid gas evaluation)	2000.0
15.1(a).1 (Annealing test ( for copper ))	1000.0
15.1(a).2 (Tensile test ( for aluminium ))	1000.0
15.1(a).3 (Wrapping test ( for aluminium 1)	500.0
15.1(a).4 (Conductor resistance-Red )	500.0
15.1(a).4 (Conductor resistance-Yellow )	500.0
15.1(a).4 (Conductor resistance-Blue)	500.0
15.1(a).4 (Conductor resistance-Black )	500.0
15.2 (e) (Average thickness of sheath)	250.0
15.2 (e) (Average thickness of insulation)	250.0
15.2 (e) (Minimum thickness of sheath)	250.0
15.1 (d) 2 (Tensile strength at break-R)	250.0
15.1 (d) 2 (Tensile strength at break-Y)	250.0
15.1 (d) 2 (Tensile strength at break-B)	250.0
15.1 (d) 2 (Tensile strength at break-Black)	250.0
15.1 (d) 2 (Elongation at break-R)	250.0
15.1 (d) 2 (Elongation at break-Y)	250.0
15.1 (d) 2 (Elongation at break-B)	250.0
15.1 (d) 2 (Elongation at break-Black)	250.0
15.1(d) 2 (Tensile strength,variation-R)	250.0
15.1(d) 2 (Tensile strength,variation-Y)	250.0
15.1(d) 2 (Tensile strength,variation-B)	250.0
15.1(d) 2 (Tensile strength,variation-Black)	250.0
15.1(d) 2 (Tensile strength,variation-Sheath)	250.0
15.1(d) 2 (Elongation ,variation-R)	250.0
15.1(d) 2 (Elongation ,variation-Y)	250.0
15.1(d) 2 (Elongation ,variation-B)	250.0
15.1(d) 2 (Elongation ,variation-Black)	250.0
15.1(d) 2 (Elongation ,variation-Sheath)	250.0
15.1 (d) 3 (Shrinkage test-Insulation)	500.0
15.1 (d) 3 (Shrinkage test-Sheath)	500.0
15.1 (d) 4 (Hot deformation-Insulation)	500.0
15.1 (d) 4 (Hot deformation-Sheath)	500.0
15.1 (d) 5 (Loss of mass in air oven-Insulation)	1500.0
15.1 (d) 5 (Loss of mass in air oven-Sheath)	1500.0
15.1 (d) 6 (Heat shock test-Insulation)	500.0
15.1 (d) 6 (Heat shock test-Sheath)	500.0
15.1 (d) 7 (Thermal stability-Insulation)	500.0
15.1 (d) 7 (Thermal stability-Sheath)	500.0
15.1 (e) (Volume resistivity at ambient temperature )	500.0
15.1 (e) (Insulation resistance constant at ambient temperature)	500.0
15.1 (e) (Volume resistivity at ambient temperature )	500.0
15.1 (e) (Volume resistivity at maximum rated temperature)	500.0
15.1 (f) (High Voltage AC)	1000.0
15.1 (f) (High Voltage DC)	2000.0
15.1 (g) (High Voltage AC)	1000.0
15.1 (h) (Flammability test-Insulation)	250.0
15.1 (h) (Flammability test-Sheath)	250.0
15.1.1.c1 (a) (Oxygen index )	3500.0
15.1.1.c1 (c) (Flame retardance test on bunched cable)	3500.0
15.1.1.c1 (b) (Flame retardance test on single cable)	3500.0
15.1.1.c1 (d) (Temperature index)	3500.0
15.1.1.c1 (c) (Flame retardance test on bunched cable)	3500.0
15.1.1.c2 (c) (Flame retardance test on bunched cable)	3500.0
15.1.1.c2 (d) (Optical density of smoke)	3500.0
15.1.1.c2 (e) (Smoke density rating)	3500.0
15.1.1.c2 (f) (Halogen acid gas evaluation)	3500.0
15.1.1.c2 (g) (Temperature index)	3500.0
15.2 (a) (Annealing test ( for copper ))	1000.0
15.2 (b) (Tensile test ( for aluminium ))	1000.0
15.2 (c) (Wrapping test ( for aluminium 1)	500.0
15.2 (c) (Conductor resistance-Red )	500.0
15.2 (c) (Conductor resistance-Yellow )	500.0
15.2 (c) (Conductor resistance-Blue)	500.0
15.1(a).4 (Conductor resistance-Black )	500.0
15.2 (e) (Average thickness of sheath)	250.0
15.2 (e) (Average thickness of insulation)	250.0
15.2 (f) (Tensile strength at break-R)	250.0
15.2 (f) (Tensile strength at break-Y)	250.0
15.2 (f) (Tensile strength at break-B)	250.0
15.2 (f) (Tensile strength at break-Black)	250.0
15.2 (f) (Elongation at break-R)	250.0
15.2 (f) (Elongation at break-Y)	250.0
15.2 (f) (Elongation at break-B)	250.0
15.2 (f) (Elongation at break-Black)	250.0
15.2 (g) (Volume resistivity at ambient temperature )	500.0
15.2 (g) (Insulation resistance constant at ambient temperature)	500.0
15.2 (g) (Volume resistivity at maximum rated temperature)	500.0
15.2 (g) (Insulation resistance constant at maximum rated temperature )	500.0
15.2 (h) (High Voltage AC)	1000.0
15.2.1.c1 (a) (Oxygen index )	3500.0
15.2.1.c1 (b) (Flame retardance test on single cable)	3500.0
15.2.1.c2 (c) (Optical density of smoke)	3500.0
15.2.1.c2 (e) (Smoke density rating)	3500.0
15.2.1.c2 (d) (Halogen acid gas evaluation)	3500.0
15.1 (Type Test - Three core Non-Mining)	24000.0
15.1 (Type Test - Three and Half or four core Non-Mining)	26000.0
15.2 (Acceptance tests - Single core Non-Mining)	11500.0
15.2 (Acceptance tests - Two core Non-Mining)	13500.0
15.2 (Acceptance tests(Two core FRLS Cable ))	16499.0
15.2 (Acceptance tests - Three core Non-Mining)	15500.0
15.2 (Acceptance tests(Three and Half or four core FRLS Cable))	26500.0
15.1 (Type Test(Three core FRLS Cable))	45000.0
15.1 (Type Test(Three and Half or four core FRLS Cable))	50000.0

3822

National Test House (SR), Chennai

IS 6006 (2014) - Uncoated stress relieved strand for prestressed concrete - Specification (Second Revision)

Uncoated stress relieved strand for prestressed concrete - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.3 (Elongation)	1000.0
7.3 (0.2% Proof Load)	1000.0
7.3 (Breaking Strenth)	3000.0
5.3 (Nominal Mass)	1500.0
5.3 (Nominal Diameter )	1000.0
7.3 (3- Ply 3mm strand: Elongation)	1000.0
7.2 (3- Ply 3mm strand: 0.2% Proof Load)	1000.0
7.1 (3- Ply 3mm strand: Breaking Load, kN)	3000.0
5.1 (Nominal Mass 3- Ply 3mm strand)	1000.0
5.1 (Nominal Area 3- Ply 3mm strand)	500.0
5.1 (Dimension 3- Ply 3mm strand: Nominal Diameter of element wire)	500.0
4.2 (Length of lay of 3- Ply 3mm strand: 24-36 time of dia of element wire)	1000.0
3.1.2 (Phosphorus, % by mass)	750.0
3.1.2 (Sulphur, % by mass.)	750.0
7.3 (3- Ply 3mm strand: Elongation)	1000.0
7.2 (3- Ply 3mm strand: 0.2% Proof Load)	1000.0
7.1 (3- Ply 3mm strand: Breaking Load, kN)	3000.0
5.1 (Nominal Mass 3- Ply 3mm strand)	1000.0
5.1 (Nominal Area 3- Ply 3mm strand)	500.0
5.1 (Dimension 3- Ply 3mm strand: Nominal Diameter of element wire)	500.0
4.2 (Length of lay of 3- Ply 3mm strand: 24-36 time of dia of element wire)	1000.0
3.1.2 (Phosphorus, % by mass)	750.0
3.1.2 (Sulphur, % by mass.)	750.0
3.1.2 (Carbon, % by mass.)	625.0
3.1.2 (Silicon, % by mass)	625.0
3.1.2 (Manganese, % by mass)	625.0
3.1.2 (Chromium, % by mass)	625.0
6.3 (Modulus of Elasticity, kN/sq.mm)	-

3823

National Test House (SR), Chennai

IS 6685 (2009) - Life jackets - Specification (First Revision)

Life jackets - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
17.2 (Shoulder Strength Test)	1000.0
16 (Strength of Neck Opening&Fastening Device)	1000.0

3824

National Test House (SR), Chennai

IS 14181 : Part 1 (2002) - Synthetic (Plastic) slide fasteners - Special purpose: Part 1 specification, selection and ordering guideline of the product (First Revision)

Synthetic (Plastic) slide fasteners - Special purpose: Part 1 specification, selection and ordering guideline of the product (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.3(ii) (Resistance to Heat under Load)	1000.0
10.3(ii) (Resistance to Abrasion under Load)	1000.0
10.3(i) (Reciprocating Movement of Slider under Load)	1000.0
10.2(viii) (Security of Slider Lock Holding)	1000.0
10.2(vii) (Security Attachment of Puller to Slider)	1000.0
10.2(vi) (Security Attachment of Retainer to Lateral Load)	1000.0
10.2(v) (Security Attachment of Retainer to Longitudinal Load)	1000.0
10.2(iv) (Security Attachment of Bottom stop)	1000.0
10.2(ii) (Security Attachment of Top stop)	1000.0
10.2(ii) (Foldover Security of Lateral chain)	1000.0
10.2(i) (Security of Interlocking of textile chain to lateral load)	1000.0
8.2 (Length of Slide Fastener)	1000.0
8.1(vii) (Diameter of Monofilament)	1000.0
8.1(vi) (Puller Length)	1000.0
8.1(v) (Tape Extension)	1000.0
8.1(iv) (Tape Width)	1000.0
8.1(iii) (Lace Width)	1000.0
8.1(ii) (Textile Chain Thickness)	1000.0
8.1(i) (Textile Chain Width)	1000.0
5 (Visual Inspection)	1000.0

3825

National Test House (SR), Chennai

IS 1322 (1993) - Bitumen Felts for Water Proofing and Damp-proofing

Bitumen Felts for Water Proofing and Damp-proofing

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (WATER ABSORPTION TEST, in percent)	2000.0
8 (PRESSURE HEAD TEST,(a) AT 65 DEGREE C FOR 3 HRS AND (b) AT 5 DEGREE C FOR 3 HRS )	2000.0
8 (HEAT RESISTANCE TEST AT 68 DEGREE C FOR 3 HRS)	2000.0
8 (STORAGE STICKING TEST at 55(+/-)2 deg C for 18 hrs)	2000.0
8 (PLIABILITY TEST (a) Unrolling (b) After Conditioning for 3 hrs at 5 deg C, (i) Warpway, (ii) Weftway)	2000.0
8 (Breaking Strength test, Kg)	2000.0
5.4 (BITUMEN FELT IN Kg/10 sq.m)	1000.0
7.2 (BITUMEN FELT IN Kg/10 sq.m)	2000.0
4.3.3 (BITUMEN FELT IN Kg)	1000.0
4.2.2 (BITUMEN FELT IN Kg)	1000.0

3826

National Test House (SR), Chennai

IS 1848 : Part 1 (2018) - Writing and printing papers - Specification: Part 1 account book, azure lead, bond, cream laid and cream wove/printing white/printing coloured/printing offset, printing maplitho, printing white super calendered and typewriting types (Fifth Revision)

Writing and printing papers - Specification: Part 1 account book, azure lead, bond, cream laid and cream wove/printing white/printing coloured/printing offset, printing maplitho, printing white super calendered and typewriting types (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.6(ix) (Tear Index (CD))	1000.0
4.6(viii) (Smoothness Bendsten)	2000.0
4.6 (Wax Pick)	1500.0
4.6 (Folding Endurance)	1500.0
4.6 (One Minute Cobb)	1000.0
4.6 (Opacity, %)	2000.0
4.6 (Brightness, %)	2000.0
4.6 (i) (Tensile Index (MD))	1000.0
4.4 (Sizes and tolerance on size)	1000.0
4.3 (Thickness)	1000.0
4.2 (Substance (Grammage), g/sq.m)	1000.0
Firms request (Brightness)	2000.0
Firms request (Opacity)	2000.0
Firms request (Tear Index(MD))	1000.0
Firms request (Tear Index(CD))	1000.0
Firm's Requirement (Surface Sizing)	1000.0
Firm's Requirement (Resistance to Feathering)	1000.0
Firm's Requirement (Breaking Length (MD))	1000.0
Firm's Requirement (Breaking Length (CD))	1000.0
4.6 (i) a (Tensile Index (CD))	1000.0
4.6 (ix) (Tear index(MD))	1000.0
4.6 (Test results - Annexure attached)	5000.0

3827

National Test House (SR), Chennai

IS 1912 (1984) - Specification for country jute twine (second revision)

Specification for country jute twine (second revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Weight of Skein)	1000.0
4.1 (Girth of Skein)	1000.0
3.1(5) (Breaking Load)	2000.0
3.1(2) (Linear Density)	1000.0
3.1(4) (Twist)	1000.0
3.1(3) (No.of Ply)	1000.0

3828

National Test House (SR), Chennai

IS 2089 (1977) - Specificaiton for common proofed canvas/duck and paulins (Tarpaulins) (Second Revision)

Specificaiton for common proofed canvas/duck and paulins (Tarpaulins) (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.3.7.2 (Cone Test)	1000.0
3.3.7.1 (Pressure Head Test)	1000.0
3.3.6 (Breaking Strength(Warp&Weft))	2000.0
3.3.4 (Pliability)	1000.0
4.2.2 (Construction)	1000.0

3829

National Test House (SR), Chennai

IS 8518 (1977) - Specification for suitcase, air travel

Specification for suitcase, air travel

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.2 (Drop test)	1000.0
6.1 (Handle Snatch Test)	1000.0
2.2 (Shape&Dimensions)	1000.0
2.1 (Shape&Dimensions)	1000.0
5.1 (Workmanship&Finish)	1000.0
4 (Construction)	1000.0

3830

National Test House (SR), Chennai

IS 10228 (1982) - Specification for school bag

Specification for school bag

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3 (Shape and Dimensions)	2000.0

3831

National Test House (SR), Chennai

IS 16525 (2017) - Styrene butadiene styrene (SBS) 3 bituminous waterproofing and damp - Proofing membrane with polyester reinforcement - Specification

Styrene butadiene styrene (SBS) 3 bituminous waterproofing and damp - Proofing membrane with polyester reinforcement - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Dimensions)	1000.0
6 (Puncture Resistance)	2000.0
6 (Dimensional Stability, Transverse)	2000.0
6 (Dimensional Stability, Longitudinal)	2000.0
6 (Water absorption (All thickness))	1000.0
6 (Heat Resistance(All thickness))	2000.0
6 (Tear Strength, Transverse)	2000.0
6 (Tear Strength, Longitudinal)	2000.0
6 (Elongation, Transverse)	1000.0
6 (Elongation, Longitudinal)	1000.0
6 (Tensile Strength Transverse)	1000.0
6 (Tensile Strength Longitudinal)	1000.0
6 (Cold Flexibility)	2000.0
6 (Thickness)	1000.0
5.2 (Weight (Finished))	1000.0

3832

National Test House (SR), Chennai

IS 1943 (1995) - Textiles – A-twill jute bags (second revision)

Textiles – A-twill jute bags (second revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1(vi) (Seam Breaking Load)	1000.0
5.1(v) (Breaking Load,Weftway)	1000.0
5.1(v) (Breaking Load,Warpway)	1000.0
5.1(iv) (Picks/dm)	1000.0
5.1(iii) (Ends/dm)	1000.0
5.1(ii) (Corrected Mass)	1000.0
5.1(i) (Outside Width)	1000.0
5.1(i) (Outside Length)	1000.0
4 (Visual Inspection)	1000.0

3833

National Test House (ER), Kolkata

IS 863 (1988) - Specification for cotton bandage cloth, non-sterilized (second revision)

Specification for cotton bandage cloth, non-sterilized (second revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1(ii)(a) (Ends/dm)	1000.0
3.1(ii)(b) (Picks/dm)	1000.0
3.1(iii) (Mass)	1000.0
3.1(iv) (Length)	1000.0
3.1(v) (Width)	1000.0
3.1(vi) (pH value)	1000.0
3.1(vii) (Scouring loss)	2000.0
3.1(viii) (Freedom from optical whiteners)	1000.0

3834

National Test House (ER), Kolkata

IS 8183 (1993) - Bonded mineral wool - Specification (First Revision)

Bonded mineral wool - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.5 (Moisture content)	1500.0
4.5 (Moisture Absorption)	1000.0
4.1 (Thickness)	1000.0
4.3 (Recovery after compression)	2000.0
4.6 (Resistance to compression)	1000.0
4.10.6 (Alkalinity)	2000.0
4.10.7 (Chloride content)	1000.0
4.1,4.2 (Bulk density)	1000.0
4.10 (Resistance to Micro Organisms)	3000.0
4.4 (Shot Content)	1000.0
4.8 (Sulphur Content)	1000.0
4.10 (Heat Resistance)	2000.0
4.10 (Alkalinity)	1200.0
4.10 (Fiber Diameter)	1000.0

3835

National Test House (SR), Chennai

IS 16186 (2014) - Textiles - Light weight jute sacking bags for packing 50 kg foodgrains - Specification

Textiles - Light weight jute sacking bags for packing 50 kg foodgrains - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1(vi) (Seam Strength)	1000.0
5.1(v) (Breaking Load,Weftway)	1000.0
5.1(v) (Breaking Load,Warpway)	1000.0
5.1(iv) (Corrected Mass)	1000.0
5.1(iii) (Picks/dm)	1000.0
5.1(ii) (Ends/dm)	1000.0
5.1(i) (Outside Width)	1000.0
5.1(i) (Outside Length)	1000.0
4.3 (Sitches/dm)	1000.0
4 (Construction)	1000.0

3836

National Test House (ER), Kolkata

IS 758 (1988) - Specification for cotton gauze, absorbent, non-sterilized (fourth revision)

Specification for cotton gauze, absorbent, non-sterilized (fourth revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1(ii)(a) (Ends/dm)	1000.0
3.1(ii)(b) (Picks/dm)	1000.0
3.1(iii) (Mass)	1000.0
3.1(iv) (Length)	1000.0
3.1(v) (Width)	1000.0
3.1(vi) (Absorbency)	1000.0
3.1(vii) (pH value)	1000.0
3.1(viii) (Scouring loss)	2000.0
3.1(ix) (Freedom from optical whiteners)	1000.0

3837

National Test House (ER), Kolkata

IS 14611 (2016) - Multilayered cross laminated sheets/tarpaulins/covers/agricultural films - Specification (First Revision)

Multilayered cross laminated sheets/tarpaulins/covers/agricultural films - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.1 (Physical Appearance)	1000.0
6.2 (GSM)	1000.0
6.3 (Tensile Strength)	3000.0
6.3 (Tear Strength)	3000.0
6.4 (Water Proofness Test)	2000.0
6.5 (Strength of Joints & Seams)	2000.0
6.8 (Tensile Strength)	1000.0
6.8 (Elongation at Break)	1000.0
6.8 (Tear Strength)	2000.0
6.8 (Dart Impact Strength)	2000.0
7.3 (Dimension of Tarpaulin)	1000.0

3838

National Test House (ER), Kolkata

IS 11688 (1999) - Newsprint - Specification (First Revision)

Newsprint - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (General)	1000.0
4.2 (Grammage)	1000.0
4.3 (Thickness)	1000.0
4.4 (Size and Size Tolerances)	1000.0
4.5 (Brightness)	2000.0
4.5 (Opacity)	2000.0
4.5 (Smoothness(Top Side))	1000.0
4.5 (Tear Index)	2000.0
4.5 (Tensile Index(MD))	1000.0
4.5 (Porosity)	2000.0
4.5 (Smoothness(Wire side))	1000.0
4.5 (Tensile Index(CD))	1000.0

3839

National Test House (SR), Chennai

IS 14968 (2015) - Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sacks for packing 50 Kg/25 kg sugar – Specification (first revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 (Avg. Breaking Strength and Elongation of fabric after UV exposure)	3000.0
5 (Elongation at break of fabric, Widthwise)	1000.0
5 (Elongation at break of fabric, Lengthwise)	1000.0
5 (Minimum Breaking Strength of bottom seam)	1000.0
5 (Avg. Breaking Strength of fabric, Widthwise)	1000.0
5 (Avg. Breaking Strength of fabric, Lengthwise)	1000.0
5 (Mass of Sack with liner)	1000.0
5 (Mass of Unlaminated Sack)	1000.0
5 (Picks/dm)	500.0
5 (Ends/dm)	500.0
5 (Dimensions, Inside Width)	1000.0
5 (Dimensions, Inside Length)	1000.0
4.5 (Capacity)	1000.0
5.1 (Mass of Bale)	1000.0
4.4 (Liner, Bottom Seam)	1000.0
4.4 (Liner, Length)	1000.0
4.4 (Liner, Width)	1000.0
4.4 (Liner, Mass)	1000.0
4.4 (Liner, Material Identification)	2000.0
4.3.2 (Mouth)	1000.0
4.3.1 (Bottom Seam, Number of Stitchs per dm)	1000.0
4.3.1 (Bottom Seam, Double fold seam depth)	1000.0
4.3.1 (Bottom Seam, Outer stitch distance from outer edge)	1000.0
4.3.1 (Bottom Seam, Two row separation distance)	1000.0
3 (Type of Sack Bag)	1000.0
5 (Ash Content)	2000.0
A (Result of Tests - Annexure attached)	8000.0
B (Results of Tests - Annexure attached(NABL Scope))	3000.0
C (Results of Tests - Annexure attached (NON-NABL))	5000.0

3840

National Test House (SR), Chennai

IS 1148 (2009) - Steel Rivet Bars (medium And High Tensile)--For Structural Purposes--For Structural Purposes

Steel Rivet Bars (medium And High Tensile)--For Structural Purposes--For Structural Purposes

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Dimension)	500.0
11 (Tensile Strength (High))	1000.0
11 (Elongation ( Medium Tensile Steel))	1000.0