NTH - Management Information System

National Test House (WR), Mumbai

Plot No. F 10, M.I.D.C, Marol, Andheri (E), Mumbai Maharashtra - 400093, Mumbai, Mumbai, Maharashtra, 400093

28260927 director-mum[at]nth[dot]gov[dot]in

Scope List

Reset

848 Results

S.No.

Standard No.

Product

Testing Charges (Excl. Of Taxes)

811

IS IS 1708 : Part 15 (1986) - Timber

Timber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Nail and screw holding power)	3000.0

812

IS IS 1708 : Part 12 (1986) - Timber

Timber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Tensile Strength parallel to Grain)	2000.0

813

IS IS 1708 : Part 11 (1986) - Timber

Timber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Shear strength parallel to Grain)	1500.0

814

IS IS 1708 : Part 9 (1986) - Timber

Timber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Compressive Strength Perpendicular to Grain)	3000.0

815

IS IS 1708 : Part 8 (1986) - Timber

Timber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Compressive Strength Parallel to Grain)	3000.0

816

IS IS 1708 : Part 5 (1986) - Timber

Timber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Static Bending Strength)	3000.0

817

IS IS 1708 : Part 2 (1986) - Timber

Timber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Specific Gravity)	500.0

818

IS IS 1708 : Part 1 (1986) - Timber

Timber

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Moisture Content)	1000.0

819

IS 383 (2016) - Coarse and Fine Aggregate for Concrete - Specification (Third Revision) [All Tests 2386]

Coarse and Fine Aggregate for Concrete - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (IS:2386(Pt.-1)_Size and Grading of Aggregates-Sieve Analysis)	2000.0
5.2 (Deleterious materials)	2000.0
5.6 (Alkali aggregate reactivity, m.mol/lit.)	3000.0
5.5 (IS:2386(Pt.-5)_Soundness)	2000.0
5.4.3 (IS:2386(Pt.-4)_Abrasion Value, %)	1500.0
5.4.2 (IS:2386(Pt.-4)_Impact Value, %)	1500.0
5.4.1 (IS:2386(Pt.-4)Crushing Value)	1500.0
5.3 (Combined Elongation Index and Flakiness Index)	3000.0
5.7 (Specific gravity)	500.0
5.7 (Water absorption)	1000.0
5.2 (Deleterious materials)	2000.0
5.3 (IS:2386(Pt.-1)_Flakiness Index)	1500.0
5.3 (IS:2386(Pt.-1)_Elongation Index)	1500.0
- - (Alkali Aggregate Reactivity (Mortar Bar Method) [on the lines of IS 2386 (Part 7)] after 1 month.)	4000.0
- - (Alkali Aggregate Reactivity (Mortar Bar Method) [on the lines of IS 2386 (Part 7)], after 2 months)	5000.0
- (Alkali Aggregate Reactivity (Mortar Bar Method) [on the lines of IS 2386 (Part 7)], after 3 months)	7000.0
- - (Alkali Aggregate Reactivity (Mortar Bar Method) [on the lines of IS 2386 (Part 7)], after 6 months)	10000.0
5.5 (IS:2386(Pt.-5)_Soundness)	2000.0

820

NSS 2022 (2022) - Non Standard Specification (NSS) as per Customer's request

Non Standard Specification (NSS) as per Customer's request

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (As per customer's request)	1200.0

821

IS 3589 (2001) - Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

Steel pipes for water and sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9.2 (Flattening test)	1000.0
9.1 (Elongation)	1000.0
9.1 (Yield Strength)	1000.0
9.1 (Tensile Strength)	1000.0
12.5 (Straightness)	1000.0
14 (Visual Inspection, Apperance and Workman ship)	1000.0
11 (Weight)	1000.0
11 (Dimension (Diameter))	1000.0
9.3 (Guided Bend Test (Face Bend and Root Bend) as per cl.9.3.1 of IS 3589 or relevant Specification)	1500.0
10 (Hydraulic Pressure Test / Leak Test as per Clause 10.1 of IS 3589 or relevant Specification)	2500.0

822

IS 12823 (2015) - Wood Products - Prelaminated Particle Boards -Specification

Wood Products - Prelaminated Particle Boards -Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.14 (Resistance to Stain-IS 12823:2015 Annex G)	1500.0
10.13 (Resistance to Cigarette Burn-IS 12823:2015 Annex F)	500.0
10.12 (Resistance to Crack-IS 12823:2015 Annex E)	500.0
10.11 (Resistance to Steam-IS 12823:2015 Annex D)	500.0
10.10 Table 2, Sl No (ix) (Abrasion Resistance-IS 12823:2015 Annex C)	5000.0
10.9, Table 2, Sl No (viii) (Screw Withdrawal Strength -IS 2380 (Part 14):1977)	1500.0
10.8, Table 2, Sl No (vii) (Tensile strength perpendicular to surface after ageing-IS 12823:2015 &-IS 2380 (Part 5):1977)	2000.0
10.7 Table 2, Sl No (vi) (Tensile strength perpendicular to surface-IS 2380 (Part 5):1977)	2000.0
10.6Table 2, Sl No (v) (Modulus of Rupture & Modulus of Elasticity-IS 2380 (Part 4):1977)	2500.0
10.5 Table 2, Sl No (iv) (Swelling in Water-IS 2380 (Part 17):1977)	1000.0
10.4 Table 2, Sl No (iii) (Water Absorption-IS 2380 (Part 16):1977)	1000.0
10.3 (Moisture Content-IS 2380 (Part 3):1977)	1000.0
10.2, Table 2, Sl No (i) & (ii) (Density-IS 2380 (Part 3):1977)	500.0
8 (Dimension & Tolerances-IS 12823:2015 Annex B)	500.0
7 (Finish-IS 12823:2015)	1000.0

823

IS 516 : Part 1 : Sec 1 (2021) - Hardened concrete methods of test part 1 testing of strength of hardened concrete section 1 compressive,flexucal and split tensile strength (First Revision)

Hardened concrete methods of test part 1 testing of strength of hardened concrete section 1 compressive,flexucal and split tensile strength (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Flexural Strength of Concrete Beam [as per IS 516 (Part 1) : 2021], in N/mm^2)	4000.0
3 (Compressive strength of Concrete, in N/mm^2)	1200.0
3 (Compressive strength of Concrete (With Additives), in N/mm^2)	1200.0
3 (Compressive strength of Concrete, in N/mm^2)	1200.0

824

IS 1293 (2019) - Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Fourth Revision)

Plugs and socket - Outlets of rated Voltage up to and including 250 Volts and rated current up to and including 16 amperes - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Marking)	500.0
6 (Rating)	50.0
7 (Classification)	100.0
9 (Checking of Dimensions )	500.0
11 (Provisions for Earthing )	100.0
12 (Terminals)	-
21 ( Normal Operation (For 6 & 16A))	4000.0
20 (Breaking Capacity)	1500.0
19 (Temperature rise test (For 6 & 16A))	500.0
21 ( Normal Operation (For 6A))	1200.0
21 ( Normal Operation (For 16A))	3200.0
19 (Temperature rise test (For 16A))	2000.0
19 (Temperature rise test (For 6A))	1800.0
28 (Test for Resistance to Abnormal Heat to fire and to tracking)	-
25 (Resistance to heat )	-
10 (Protection against Electric Shocks )	100.0
13 (Constructional Requirements)	100.0
16 ( Resistance to Ageing to to Harmful ingress of water and to humidity)	1000.0
17 (Insulation Resistance and electric strength )	-
18 (Operation of earthing contacts)	800.0
22 (Force Necessary to withdraw the Plug )	-
23 (Flexible cables and their connection )	-
26 (Test for Screws Current carrying parts & connection )	200.0
27 (Creepage distances and clearances and distances through sealing compound)	200.0
29 (Test for Resistance to Rusting)	-
14 (Construction of Plugs & Portable Socket outlets )	-
15 (Inter-locked socket outlets )	-
30 (Additional tests on pins provided with insulating Sleeves )	-
25.2 (Ball pressure test at 125 ± 20C for one hour for parts of insulating material necessary to retain current carrying parts )	-
4 (General Requirement)	-
3 (Terminology)	-
5 (General Notes on Tests)	-
24 (Mechanical Strength)	-

825

IS 10500 (2012) - Drinking Water - Specification (Second Revision)

Drinking Water - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Total Chromium (as Cr) - IS 3025 (Part 52) : 2003)	500.0
4 (Total Arsenic (as As) - IS 3025 (Part 37): 2022)	500.0
4 (Nickel (as Ni) - IS 3025 (Part 54):2003)	500.0
4 (Molybdenum (as Mo))	500.0
4 (Mercury (as Hg) - IS 3025 (Part 48) : 1994)	500.0
4 (Lead (as Pb) - IS 3025 (Part 47) : 1994)	500.0
4 (Cadmium (as Cd) - IS 3025 (Part 41) : 2022)	500.0
4 (Zinc (as Zn) - IS 3025 (Part 49): 1994)	500.0
4 (Total Hardness (as CaCO3) - IS 3025 (Part 21) : 2009)	500.0
4 (Total alkalinity as Calcium carbonate - IS 3025 (Part 23): 2023)	400.0
4 (Sulphide (as H2S) - IS 3025 (Part 29) : 2022, Clause 7)	300.0
4 (Sulphate (as SO4) - IS 3025 (Part 75) : 2022)	500.0
4 (Silver (as Ag) - Annex J of IS 13428 : 2005)	500.0
4 (Selenium (as Se) - IS 3025 (Part 56): 2003)	500.0
4 (Mineral Oil - IS 3025 (Part 39): 2021, Clause 6)	500.0
4 (Manganese (as Mn) - IS 3025 (Part 59): 2006)	500.0
4 (Magnesium (as Mg) - IS 3025 (Part 46): 1994)	500.0
4 (Iron (as Fe) - IS 3025 (Part 53) :2003, Clause 7)	500.0
4 (Fluoride (as F) - IS 3025 (Part 75) : 2022)	500.0
4 (Copper (as Cu) - IS 3025 (Part 42): 1992)	500.0
4 (Chloride (as Cl) - IS 3025 (Part 32): 1988, Clause 2/IS 3025 (Part 75) : 2022)	500.0
4 (Calcium (as Ca) - IS 3025 (Part 40) : 1991, Clause 5)	500.0
4 (Boron (as B) - IS 3025 (Part 57): 2005)	500.0
4 (Barium (as Ba) - Annex F of IS 13428 : 2005)	500.0
4 (Aluminium (as Al) - IS 3025 (Part 55): 2003)	500.0
4 (Total Dissolved Solids - IS 3025 (Part 16) : 2023)	500.0
4 (Turbidity - IS 3025 (Part 10) : 2023)	200.0
4 (Taste - IS 3025 (Part 8) : 2023))	200.0
4 (pH value- IS 3025 (Part 11) : 2022)	300.0
4 (Odour - IS 3025 (Part 5) : 2018)	300.0
4 (Colour - IS 3025 (Part 4): 2021, Clause 4)	200.0

826

IS 5410 (2013) - Cement paint - Specification (Second Revision)

Cement paint - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.8 ix (Recoating properties)	1200.0
4.8 viii (Pot life of mixed paint)	1200.0
4.8 vii (Water repellency)	1200.0
4.8 vi (Resistance to dry rubbing)	1200.0
4.8 v (Residue on sieve % by mass)	1200.0
4.8 iv (Fastness to light (250hrs))	12500.0
4.8iii (Colour)	1200.0
4.8 ii (Finish)	1200.0
4.8 i (Drying time Hard dry)	1200.0
4.7 (Keeping properties)	5000.0
4.6 (Durability Normal Out Door exposure Test 18 Months)	15000.0
Cl 4.4 (Lead Restriction)	1200.0
Cl 4.1 (Composition)	3500.0
IS 5410 Cement Paint (Coverage)	1200.0
VOC (Volatile Organic Compound, (VOC))	4000.0
CEMENT PAINT — SPECIFICATION (Toxic metals such as lead, cadmium, chromium (VI) by atomic absorption spectrophotometric methods.)	3600.0

827

IS 428 (2013) - Washable distemper - Specification (Third Revision)

Washable distemper - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.7 ix (ix)Acc storage stability)	1500.0
6.7 viii (viii) Resistance to alkali)	1000.0
6.7 Vii (vii) Recoating properties)	1000.0
6.7 Vi (vi) Residue on sieve % by mass)	200.0
6.7 v (v) Fastness to light 250 hrs)	12500.0
6.7 iv (iv) Colour)	500.0
6.7 iii (iii)Finish)	500.0
6.7 ii (ii) Consistency)	1000.0
6.7 i. (b) (Drying time b) Hard dry)	1500.0
6.7 i. (a) (Drying time a) surface dry)	1500.0
6.6 (Keeping properties)	5000.0
6.5 (Lead Restriction)	500.0
6.3 (Application)	500.0
6.2 (Thinning)	100.0
6.1 (Form and condition)	500.0

828

IS 427 (2013) - Distemper, dry, colour as required - Specification (Third Revision)

Distemper, dry, colour as required - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.3 (Lead Restriction)	500.0
4.2.2.ix (Resistance to dry rubbing IS 427 Annex F)	100.0
4.2.2.viii (Resistance to Alkali IS 427 Annex E)	100.0
4.2.2vii (Recoating properties IS 427 Annex D)	100.0
4.2.2.vi (Residue on sieve IS 427 Annex C)	100.0
4.2.2.v (Fastness to light 250 Hours Exposure Xenon arc Appartaus)	5000.0
4.2.2.iv (colour IS 101 (Part 4 /Sec 2))	100.0
4.2.2.iii (Finish IS 101 (Part 3/Sec 4))	100.0
4.2.2.ii (consistency IS 101 (Part 1/ Sec 5))	100.0
4.2.2 i (Drying Time Hard Dry)	200.0
4.1 (Form and Condtion)	100.0

829

IS 8887 (2018) - Bitumen emulsion for roads (Cationic Type) - Specification (Third Revision)

Bitumen emulsion for roads (Cationic Type) - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

830

FCO -1985 (1985) - The Fertiliser (Control) Order 1985 (as amended upto Nov 2023)

The Fertiliser (Control) Order 1985 (as amended upto Nov 2023)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Schedule I Part A (Available Phosphorous percent by weight)	1000.0
Schedule I Part A (Ammoniacal nitrogen)	1000.0
Schedule I Part A (Water soluble potash (as K2O))	1000.0
Schedule I Part A (Moisture)	1000.0
Schedule I Part A (Water soluble phosphates (as P2O5))	1000.0
Schedule I Part A (Particle size – Not less than 90 per cent of the material shall pass through 4 mm IS sieve and retained on 1mm IS sieve. Not more than 5 per cent shall be below 1 mm IS sieve.)	1000.0
Schedule I Part A (Free phosphoric acid (as P 2O5))	1000.0
Schedule I Part A (Nitrate nitrogen)	1000.0
Schedule I Part A (Sodium (as NaCl) on dry basis)	1000.0
Schedule I Part A (Water soluble Zinc (as Zn EDTA))	1000.0
Schedule I Part A (Total chloride (as Cl)(on dry basis))	1000.0
Schedule I Part A (Matter insolubles in water)	1000.0
Schedule I Part A (Boron (as B))	1000.0
Schedule I Part A (pH)	1000.0
Schedule I Part A (Sulphate Sulphur (as S))	1000.0
Schedule I Part A (Zinc (as Zn))	1000.0
Schedule I Part A (Elemental sulphur (as S))	1000.0
Schedule I Part A (Iron (as Fe))	1000.0
Schedule I Part A (Cadmium (as Cd))	1000.0
Schedule I Part A (Copper)	1000.0
Schedule I Part A (Lead (as Pb))	1000.0
Schedule I Part A (Magnesium (as Mg))	1000.0
Schedule I Part A (Arsenic (as As))	1000.0
Schedule I Part A (pH (5% solution))	1000.0
Schedule I Part A (Manganese (as Mn))	1000.0
Schedule I Part A (Total nitrogen)	1000.0
Schedule I Part A (Total phosphate (as P2O5))	1000.0
Schedule I Part A (ALL TESTS AS PER FCO-1985 -(PLEASE SEE THE ANNEXURE)-NABL)	7000.0

831

IS 110 (2017) - Ready mixed paint, brushing, grey filler, for enamels for use over primers - Specification (Third Revision)

Ready mixed paint, brushing, grey filler, for enamels for use over primers - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.3xiii (Keeping properties)	5000.0
4.3 xii (Flash point)	1200.0
4.3 xi (Flexibility and adhesion:b)bend test with 6.25 mm dia mandrel Type I apparatus)	1200.0
4.3 xi (Flexibility and adhesion: a Scratch Hardness Test 1000 g)	1200.0
4.3x (Residue on sieve ,percent by mass)	1200.0
4.3ix (Wet opacity m2/10 litre)	1200.0
4.3vi (colour)	1200.0
4.3 v (Dry Film thickness per coat by brush in microns)	1200.0
4.3 iv (Finish)	1200.0
4.3 iii (Mass, kg/10litre)	1200.0
4.3 ii (b) Viscosity by Ford Cup no 4 at 27 (+/-)2 deg C)	1200.0
4.3 i (i) Drying time, h b) hard dry)	1200.0
4.3 i (i) Drying time, h, a) surface dry )	1200.0
4.2 (Lead Restrictions)	2500.0
4.1 (Composition)	1200.0

832

IS 158 (2015) - Ready mixed paint, brushing, bituminous, black, acid, alkali and heat resisting - Specification (Fourth Revision)

Ready mixed paint, brushing, bituminous, black, acid, alkali and heat resisting - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.3,xvi (Keeping properties)	500.0
4.3,xv (Flash Point)	500.0
4.3,xiv (Resistance to heat)	200.0
4.3,xiii (Resistance to alkali)	1000.0
4.3,xii (Resistance to acid)	2000.0
4.3,xi (Volatile matter, percent by mass)	200.0
4.3,x (Protection against corrosion under conditions of condensation)	2000.0
4.3, ix (Stripping Test)	1000.0
4.3, viii (Flexibility and adhesion, bend test with 6.25 mm dia mandrel and type 1 apparatus)	1000.0
4.3,vii (Water Content,percent by mass)	100.0
4.3,vi (Mass, kg/10litre)	100.0
4.3,v (Colour)	100.0
4.3,iv (Wet opacity)	500.0
4.3,iii (Finish)	100.0
4.3,ii (Consistency)	1000.0
4.3,i (Drying time : Hard dry)	1000.0
4.2 (Lead Restrictions)	1500.0

833

IS 2171 (1999) - Specification for portable fire extinguishers,dry powder (cartridge type)

Specification for portable fire extinguishers,dry powder (cartridge type)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

834

IS 2074 (2015) - Ready Mixed Paint, Air Drying, Red Oxide - Zinc Chrome, Priming - Specification

Ready Mixed Paint, Air Drying, Red Oxide - Zinc Chrome, Priming - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.6, xii (Keeping properties)	5000.0
5.6,xi (Accelerated storage stability test)	200.0
5.6,x.c (Resistance to salt spray)	500.0
5.6,x.a (Resistance to humidity)	2500.0
5.6,ix (Volume solids)	200.0
5.6,viii (Flash point)	500.0
5.6,vii.b (Flexibility and adhesion: Scratch hardness (load 1000g))	100.0
5.6,vii.a (Flexibility and adhesion:Bend test (with 6.25 mm dia mandrel and in type 1 apparatus))	100.0
5.6,vi (Colour)	50.0
5.6,v (Fineness of grind, microns)	100.0
5.6,iv.b (Gloss, 60º)	100.0
5.6,iv.a (Finish)	100.0
5.6,iii.b (Drying: hard dry)	100.0
5.6,iii.a (Drying: Surface dry)	100.0
5.6,ii (Mass, kg/10litre)	200.0
5.6,i. b (Viscosity by Ford cup No. 4 at 27 ± 2°C)	200.0
5.6,i. a (Consistency)	200.0
5.5 (Lead Restriction)	200.0
5.3 (Compatibility with thinner)	200.0
5.1.2 (Volatile vehicle)	200.0
5.1.1.b (Synthetic red oxides of iron red oxide (as Fe2O3))	1000.0
5.1.1.a (zinc oxide)	500.0
5.1.1.a (chromic anhydride)	1000.0
5.1.a (Pigment, percent by mass)	1200.0

835

IS 164 (2015) - Ready mixed paint for road marking - Specification (Second Revision)

Ready mixed paint for road marking - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.6.2.1 (Volatile Organic Compounds (VOC): (IS 101 (Part 2/Sec 1) and IS 101 (Part 2/Sec 2)))	3000.0
xii (Keeping properties (IS 101 (Part 6/Sec 2)))	5000.0
xi (Mass in kg/10 litre, (IS 101 (Part 1/Sec 7)))	500.0
x (Flash point (IS 101 (Part 1/Sec 6)))	600.0
ix (Residue on sieve, Max, (IS 101 (Part 8/Sec 1)))	500.0
viii-b (Resistance to wear a) For Grade 2 (as refer in IS 164))	1000.0
viii-a (Resistance to wear a) For Grade 1 (As refer in IS 164))	1000.0
vii (Recoating property (As refer in IS 164))	600.0
vi (Resistance to bleeding (As refer in IS 164))	500.0
v (Wet Opacity (IS 101 (Part 4/Sec 1)))	600.0
iv (Colour (IS 101 (Part 4/Sec 2)))	500.0
iii (Finish (IS 101 (Part 3/Sec 4)))	500.0
ii (Consistency (Annex D))	500.0
i (Drying time, Max b) Hard dry (IS 101 (Part 3/Sec 1)))	500.0
5.5 table 1 i (Drying time, Max a) Surface dry (IS 101 (Part 3/Sec 1)))	500.0
5.4 (Lead Restriction, Max, (IS 101 (Part 8/Sec 5)))	1200.0
5.3 (Durability (Annex C) 25 days)	2000.0
5.2 (Applications (Annex B))	500.0

836

IS 299 (2012) - Alumino - Ferric - Specification (Fifth Revision)

Alumino - Ferric - Specification (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (pH (of 5 percent aqueous solution),)	1000.0
4.2 (Water soluble aluminium compounds (as Al2O3))	1000.0
4.2 (Soluble iron compound (as Fe))	1000.0
4.2 (Insouble matter)	1000.0
4.2 (Free acidity (As H2SO4), Basicity ( as Al2O3),)	1000.0
4.2 (Anionic detergents (as MBAS), parts per million)	1000.0
4.2 (Phenolic compounds (as C6H5OH), parts per million)	1000.0
4.2 (Selenium (as Se))	1000.0
4.2 (Cadmium (as Cd))	500.0
4.2 (Chromium (as Cr))	500.0
4.2 (Manganese (as Mn))	500.0
4.2 (Mercury (as Hg))	1000.0
4.2 (Arsenic (as As2O3))	1000.0
4.2 (Lead (as Pb))	500.0

837

IS 73 (2013) - Paving bitumen - Specification (Fourth Revision)

Paving bitumen - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.2(vii)b (Ductility dg)	1200.0
6.2(vi) (Softening Point (R&B))	1200.0
6.2(v) (Solubility in TCE)	1200.0
6.2(iv) (Flash Point, cleveland Open cup)	1200.0
6.2 (i) (Penetration,25 dg 100g 5sec 0.1 mm)	1200.0

838

IS 133 : Part 1 (2013) - Enamel, interior: (A) undercoating (B) finishing - Specification: Part 1 for household and decorative purposes (Fifth Revision)

Enamel, interior: (A) undercoating (B) finishing - Specification: Part 1 for household and decorative purposes (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.9, xiv (Keeping properties)	5000.0
5.9, viii (Fasteness to light)	5000.0
5.9,xiii (Accelerated storage stability test)	2000.0
5.9,xii (Volume solids percent)	1200.0
5.9,xi (Flash point)	1200.0
5.9,x,b (Flexibility and adhesion:Bend test with 6.25 mm dia Mandre in type 1 apparatus.)	1200.0
5.9,x,a (Flexibility and adhesion: Scratch hardness (Load 1 000 g), )	1200.0
5.9,ix (Resistance to water)	1200.0
5.9,vii (Wet opacity)	1200.0
5.9,vi (colour)	1200.0
5.9,v (Fineness of grind, microns)	1200.0
5.9, iv,b (Gloss, 60º)	1200.0
5.9,iv,a (Finish)	1200.0
5.9,iii b ( Viscosity by B 4 ford cup)	1200.0
5.9,ii (Mass, kg/10litre)	1200.0
5.9.i c (Drying time : Tack free)	1200.0
5.9.i b (Drying time : Hard dry)	1200.0
5.9.i a (Drying time : Surface dry)	1200.0
5.8 (Lead Restrictions)	2500.0
5.7 (Freedom from Yellowing)	1200.0
5.6 (Thinning Properties)	1200.0
5.5 (Skin formation)	1200.0
5.4 (Freedom from Coarse Particles)	1200.0
5.3 (Condtion in container)	1200.0
5.2 (Total Non-volatile content)	1200.0

839

IS 2339 (2013) - Aluminium paints for general purposes - Specification (First Revision)

Aluminium paints for general purposes - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.3 ix (Keeping properties)	5000.0
5.3viii (Flash point)	2000.0
5.3 vii (Resistance to humidity under condition of condensation)	3000.0
5.3 vi (Flexibility and adhesion, bend test usingType 1 apparatus and 6.25 mm dia Mandrel)	200.0
5.3 v (Wet Opacity)	500.0
5.3 iv (Mass)	200.0
5.3 iii (Finish)	200.0
5.3 ii (Consistency)	200.0
5.3 i (Drying Time Hard dry)	200.0
5.2 (Lead Resistrction)	500.0
5.1.1 (Leafing Value)	1500.0
5.1 (Compostion)	200.0

840

IS 15489 (2013) - Paint, plastic emulsion - Specification (First Revision)

Paint, plastic emulsion - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.12 (Toxic metals such as lead, cadmium, chromium (VI))	3600.0
6.12 (Volatile organic compounds,)	2000.0
6.1 (Keeping properties)	5000.0
6.5 (Mass in kg/10 litre (IS 101 (Part 1/Sec 7)))	500.0
6.11 (Recoating properties, (Annexure J of IS 15489:2013))	2000.0
6.11 (Washability and cleanability (Annexure G of IS 15489:2013))	1900.0
6.11 (Resistance to alkali (Annexure F of IS 15489:2013))	500.0
6.11 (Accelerated storage stability test (Annexure H of IS 15489:2013))	700.0
6.11 (Colour (Annexure E of IS 15489:2013))	100.0
6.11 (Gloss at 60 degree d) Class D, (IS 101 (Part 4/Sec 4)))	200.0
6.11 (Gloss at 60 degree c) Class C, (IS 101 (Part 4/Sec 4)))	200.0
6.11 (Gloss at 60 degree b) Class B, (IS 101 (Part 4/Sec 4)))	200.0
6.11 (Gloss at 60 degree a) Class A (IS 101 (Part 4/Sec 4)))	200.0
6.11 (Finish (Annexure D of IS 15489:2013))	1200.0
6.11 (Consistency (Annexure B of IS 15489:2013))	1200.0
6.11 (Drying time a) Hard dry (Class C and D) (Annexure D of IS 15489:2013))	200.0
6.11 (Drying time a) Hard dry (Class A and B) (Annexure D of IS 15489:2013))	1200.0
6.11 (Drying time a) Surface dry (Class C and D) (Annexure D of IS 15489:2013))	1200.0
6.11 (Drying time a) Surface dry (Class A and B) (Annexure D of IS 15489:2013))	1200.0
6.9 (Lead Restriction)	1000.0
6.8 (Durability Test for Exterior Use Only : Normal Outdoor exposure for 12 Months (Annexure C of IS 15489:2013))	12000.0
6.6 (Opacity (IS 101 ( Part 1/Sec 3)))	1000.0
6.2 (Conditions in the Container)	200.0
6.7 & 6.11 (Fastness to Light (Xenon Arc apparatus for 500 hrs) (IS 101 Part 4/ Sec 3))	15000.0
6.3 (Thinning)	1000.0
6.4 (Application Properties)	700.0
6.1 (Composition)	200.0
Enamel, Exterior: (a) Undercoating (b) Finishing - Specification Part 1 for Domestic and Decorative Applications (Please refer annexure)	3600.0
Paint, plastic emulsion - Specification (First Revision) (Coverage)	1200.0
6.8 1. 2 (Accelerated weathering apparatus QUV ( for 21 days))	20000.0
Accelerated Weathering Tests (Accelerated Weathering Tests (UV condensation type), IS 101 (Part 6/Sec 5): 1997 for 1000 hr)	60000.0
Accelerated Weathering Tests (Accelerated Weathering Tests (UV condensation type), IS 101 (Part 6/Sec 5): 1997 for 1500 hr)	90000.0
Accelerated Weathering Tests (Accelerated Weathering Tests (UV condensation type), IS 101 (Part 6/Sec 5): 1997 for 2000 hr)	100000.0
Paint plastic emulsion (Pull off Adhesion (ASTM D 4541))	2000.0
Paint, plastic emulsion - Specification (First Revision) (Artificial Aging Resistance 500 hrs, ASTM G 154 (Cycle 2 - UVB 313, 4h UV at 60 (±3) °C and 4 h Condensation at 50 (±3) °C))	30000.0
Paint, plastic emulsion - Specification (First Revision) (Brushing Test (IS 101 (Part 1/Sec 4)))	2000.0
Paint, plastic emulsion - Specification (First Revision) (Water Resistance for 7 days (IS 101 (Part 7/Sec 1)))	1500.0
Paint, plastic emulsion - Specification (First Revision) (Toxic Element Mercury (Instrumental Method AAS))	1200.0
Paint, plastic emulsion - Specification (First Revision) (Free Formaldehyde (ASTM D 6191))	5000.0
Paint, plastic emulsion - Specification (First Revision) (Contrast Ratio (ASTM D 2805))	2000.0
Paint, plastic emulsion - Specification (First Revision) (Brightness index (ASTM D 2244))	2000.0
Paint, plastic emulsion - Specification (First Revision) (Whiteness Index (ASTM E 313))	2000.0
Paint, plastic emulsion - Specification (First Revision) (Opacity (Hiding power) - ASTM D 2805)	2000.0