NTH - Management Information System

Search by Standard No.

Reset

4391 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

901

National Test House (ER), Kolkata

9825-2003 - CHLORINE TABLETS —SPECIFICATION

CHLORINE TABLETS —SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1 (Available Chlorine)	1200.0

902

National Test House (NER), Guwahati

IS 854 (2021) - Textiles Handloom cotton turkish honeycomb and huckaback towels and towelling cloth Specification

Textiles Handloom cotton turkish honeycomb and huckaback towels and towelling cloth Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.1 (Count of Yarn (Warp))	500.0
5.1 (Count of yarn (Weft))	500.0
5.1 (Ends/dm)	500.0
5.1 (Picks/dm)	500.0
5.1 (Mass)	1000.0
5.1 (Weave)	500.0
5.1 (Breaking Load (Warp))	1000.0
5.1 (Breaking Load (Weft))	1000.0
5.2 (Identification of material)	2000.0
5.2 (Dimensional Change)	2000.0
5.2 (Scouring loss)	2000.0
5.2 (Color fastness to light)	3000.0
5.2 (Color fastness to washing)	2000.0
5.2 (Color fastness to rubbing)	2000.0
5.2 (Wettability)	1000.0

903

National Test House (SR), Chennai

IS 8662 (2004) - Enamel, synthetic exterior: (A) undercoating (B) finishing, for railway coaches - Specification (Second Revision)

Enamel, synthetic exterior: (A) undercoating (B) finishing, for railway coaches - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.6.vii (Water content (if suspected to be present) - IS 101 (Part 2/Sec 1))	1200.0
6.6.xi.a (Volume solids)	3000.0

904

National Test House (NR), Ghaziabad

Custom Specn. for Alloy Steel/wire Rod - Testing of Alloy Steel/ Wire Rod

Testing of Alloy Steel/ Wire Rod

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Please see Annexure)	2000.0

905

National Test House (WR), Mumbai

IS 1290 (2023) - Specification for Mineral Gypsum (Third Revision)

Specification for Mineral Gypsum (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (i) (Free water, percent by mass)	1000.0
4.2 (iii) (Silica & other insoluble matter, percent by mass)	1000.0
4.2 (iv) (Iron & aluminium (as oxides), percent by mass)	1000.0
4.2 (v) (Magnesium oxide (as MgO), percent by mass)	1000.0
4.2 (vi) (Calcium sulphate (as CaSO4), percent by mass)	1000.0
4.2 (vii) (Chlorides (as NaCl), percent by mass)	1000.0

906

National Test House (ER), Alipore

F-6C EIL Specification No. 6-79-0020 Rev.1 (2024) - F-6C Solvent less epoxy Coating

F-6C Solvent less epoxy Coating

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume Solid)	2000.0
2 (Dry Film Thickness)	1200.0
3 (Theoretical Covering capacity in sq.mt/coat/litre.)	1500.0
4 (Weight per Litre)	1200.0
5 (Touch dry at 30 deg.C)	1200.0
6 (Hard Dry at 30 deg.c)	1200.0
7 (Full cure at 30 deg.C)	1200.0
8 (Over-coat interval)	1200.0
9 (Pot Life at 30 deg.C for Two Component Paints)	1500.0
10 (Adhesion (ASTM D 4541))	5000.0
11 (Temperature Resistance (Min))	3000.0

907

National Test House (ER), Alipore

F-6B EIL Specification No. 6-79-0020 Rev.1 (2024) - F-6B Epoxy High Build Coating

F-6B Epoxy High Build Coating

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume Solid)	2000.0
2 (Dry Film Thickness)	1200.0
3 (Theoretical Covering capacity in sq.mt/coat/litre.)	1500.0
4 (Weight per Litre)	1200.0
5 (Touch dry at 30 deg.C)	1200.0
6 (Hard Dry at 30 deg.c)	1200.0
7 (Full cure at 30 deg.C)	1200.0
8 (Over-coat interval)	1200.0
9 (Pot Life at 30 deg.C for Two Component Paints)	1500.0
10 (Adhesion (ASTM D 4541))	5000.0
11 (Temperature Resistance (Min))	3000.0

908

National Test House (ER), Alipore

F-6A EIL Specification No. 6-79-0020 Rev.1 (2024) - F-6A Epoxy High Build Coating

F-6A Epoxy High Build Coating

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume Solid)	2000.0
2 (Dry Film Thickness)	1200.0
3 (Theoretical Covering capacity in sq.mt/coat/litre.)	1500.0
4 (Weight per Litre)	1200.0
5 (Touch dry at 30 deg.C)	1200.0
6 (Hard Dry at 30 deg.c)	1200.0
7 (Full cure at 30 deg.C)	1200.0
8 (Over-coat interval)	1200.0
9 (Pot Life at 30 deg.C for Two Component Paints)	1500.0
10 (Adhesion (ASTM D 4541))	5000.0
11 (Temperature Resistance (Min))	3000.0

909

National Test House (ER), Alipore

F-17 EIL Specification No. 6-79-0020 Rev.1 (2024) - F-17 Novolac Epoxy Phenolic Coating Cured with Polyamine Adduct Hardener

F-17 Novolac Epoxy Phenolic Coating Cured with Polyamine Adduct Hardener

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume Solid)	2000.0
2 (Dry Film Thickness)	1200.0
3 (Theoretical Covering capacity in sq.mt/coat/litre.)	1500.0
4 (Weight per Litre)	1200.0
5 (Touch dry at 30 deg.C)	1200.0
6 (Hard Dry at 30 deg.C)	1200.0
7 (Full cure at 30 deg.C)	1200.0
8 (Over-coat interval)	1200.0
9 (Pot Life at 30 deg.C for Two Component Paints)	1500.0
10 (Adhesion (ASTM D 4541))	5000.0
11 (Temperature Resistance (Min))	3000.0

910

National Test House (ER), Alipore

F-15 EIL Specification No. 6-79-0020 Rev.1 - F-15, Two Component Epoxy Phenolic Coating Cured with Polyamine adduct Hardener

F-15, Two Component Epoxy Phenolic Coating Cured with Polyamine adduct Hardener

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume Solid)	2000.0
2 (Dry Film Thickness)	1200.0
3 (Theoretical Covering capacity in sq.mt/coat/litre.)	1500.0
4 (Weight per Litre)	1200.0
5 (Touch dry at 30 deg.C)	1200.0
6 (Hard Dry at 30 deg.C)	1200.0
7 (Full cure at 30 deg.C)	1200.0
8 (Over-coat interval)	1200.0
9 (Pot Life at 30 deg.C for Two Component Paints)	1500.0
10 (Adhesion (ASTM D 4541))	5000.0
11 (Temperature Resistance (Min))	3000.0

911

National Test House (ER), Alipore

F-12 EIL Specification No. 6-79-0020 Rev.1 (2024) - F-12 Heat Resistance Silicon Aluminium paint

F-12 Heat Resistance Silicon Aluminium paint

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume Solid)	2000.0
2 (Dry Film Thickness)	1200.0
3 (Therotical Covering capacity in sq.mt/coat/litres)	1500.0
4 (Weight per Litre)	1200.0
5 (Touch dry at 30 deg.C)	1200.0
6 (Hard Dry at 30 deg.c)	1200.0
7 (Over-coat interval)	1200.0
8 (Temperature Resistance (Min))	3000.0

912

National Test House (ER), Alipore

F14 EIL Specification No. 6-79-0020 Rev.1 (2014) - F-14 Polyamine cure coal tar epoxy

F-14 Polyamine cure coal tar epoxy

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume Solid)	2000.0
2 (Dry Film Thickness)	1200.0
4 (Weight per Litre)	1200.0
5 (Touch dry at 30 deg.C)	1200.0
6 (Hard Dry at 30 deg.c)	1200.0
7 (Full cure at 30 deg.)	1200.0
8 (Over-coat interval)	1200.0
9 (Pot Life at 30 deg.C for Two Component Paints)	1500.0
10 (Adhesion (ASTM D 4541))	5000.0
11 (Temperature Resistance (Min))	3000.0
3 (Theoretical Covering capacity in sq.mt/coat/litre.)	1500.0

913

National Test House (NR), Ghaziabad

IS 8183:1993 - Bonded Mineral Wool

Bonded Mineral Wool

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1. (Description)	1000.0
4.2 (Bulk density (IS 3144 ))	1000.0
4.3 (Recovery after Compression(IS 3144))	1500.0
4.5 (Moisture content (IS 3144))	1000.0
4.5 (Moisture Absorption (IS 3144))	1000.0
4.8 (Sulphur content(IS 3144))	1000.0
4.9 (Dimension)	1000.0
4.10.6 (Alkalinity ( IS 3144))	1000.0
4.4 (Shot Content)	2000.0

914

National Test House (SR), Chennai

on the lines of ASTM C109 & ASTM 1660 - Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) masonry

Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) masonry

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
custom (Compressive strength -7 days & 28 days (on the lines of ASTM/IS))	4000.0
custom (Split Tensile strength-On the lines of ASTM/IS (7 days /28 days))	4000.0

915

National Test House (SR), Chennai

IS 2250/On the lines of ASTM/IS 1727/2770 - MICRO CONCRETE

MICRO CONCRETE

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
custom (Flow Test(on the lines of IS 2250))	1000.0
custom (Compressive strength (on the lines of IS /ASTM)-1 Day)	2000.0
custom (Compressive strength (on the lines of IS /ASTM)-7 Days)	2000.0
custom (Compressive strength (on the lines of IS /ASTM)-28 Days)	2000.0
custom (Flexural strength -(on the lines of IS/ASTM)1 Day)	2000.0
custom (Flexural strength (on the lines of IS /ASTM)-7 Days)	2000.0
custom (Flexural strength (on the lines of IS /ASTM)-28 Days)	2000.0
custom (Drying Shrinkage (IS 1727))	1000.0
custom (Split Tensile strength (IS 5816))	2000.0
custom (Rebar Pull out Bond Strength(Max load in kN))	4000.0
custom (Alkali aggregate reactivity(Mortar bar method)-IS/ASTM)	3000.0
custom (Co-efficient of Thermal Expansion(IS /ASTM))	3000.0
custom (Scratch Hardness-Mohs' scale(-on the lines of IS 13630(13)))	1500.0

916

National Test House (NWR), Jaipur

IS/IEC 60168 (2000) - Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V

Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Bending Test)	5000.0
0 (Compression Test)	5000.0

917

National Test House (NR), Ghaziabad

CUSTOMER SPEC SILT - CUSTOMER SPEC SILT

CUSTOMER SPEC SILT

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (pH value)	1200.0
3 (Electrical Conductivity)	1200.0
2 (Moisture Content)	1200.0
1 (Loss of ignition)	1200.0

918

National Test House (ER), Alipore

F-11 EIL Specification No. 6-79-0020 Rev.1 - F-11 Heat Resistance synthetic medium based Two pack Aluminium paint

F-11 Heat Resistance synthetic medium based Two pack Aluminium paint

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume Solid)	2000.0
2 (Dry Film Thickness)	1200.0
3 (.Therotical Covering capacity in sq.mt/coat/litres.)	1500.0
4 (Weight per Litre)	1200.0
5 (Touch dry at 30 deg.C)	1200.0
6 (Hard Dry at 30 deg.C)	1200.0
7 (Over-coat interval)	1200.0
8 (Temperature Resistance (Min))	1200.0

919

National Test House (ER), Alipore

F-9 EIL Specification No. 6-79-0020 Rev.1 (2024) - F-9 Inorganic zinc silicate Coating

F-9 Inorganic zinc silicate Coating

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume Solid)	2000.0
2 (Dry Film Thickness)	1200.0
3 (Theoretical Covering capacity in sq.mt/coat/litre)	1500.0
4 (Weight per Litre)	1200.0
5 (Touch dry at 30 deg.C)	1200.0
6 (Hard Dry at 30 deg. C)	1200.0
7 (Pot Life at 30 deg.C for Two Component Paints)	1200.0
8 (Adhesion (ASTM D 4541))	5000.0
10 (Temperature Resistance (Min))	3000.0
9 (Over-coat interval)	1200.0

920

National Test House (ER), Alipore

F-7 EIL Specification No. 6-79-0020 Rev.1 (2024) - F-7 High build coal tar epoxy Coating

F-7 High build coal tar epoxy Coating

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume Solid)	2000.0
3 (Therotical Covering capacity in sq.mt/coat/litres.)	1500.0
4 (Weight per Litres)	1200.0
5 (Touch dry at 30 deg.C)	1200.0
2 (Dry Film Thickness)	1200.0
6 (Hard Dry at 30 deg.c)	1200.0
7 (Full cure at 30 deg.C)	1200.0
8 (Over-coat interval)	1200.0
9 (Pot Life at 30 deg.C for Two Component Paints)	1500.0
10 (Adhesion (ASTM D 4541))	5000.0
11 (Temperature Resistance (Min))	3000.0

921

National Test House (ER), Alipore

P-4 EIL Specification No. 6-79-0020 Rev.1 (2024) - P-4 Etch Primer/Wash Primer

P-4 Etch Primer/Wash Primer

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume Solid)	2000.0
2 (Dry Film Thickness)	1200.0
3 (Therotical Covering Capacity)	1500.0
4 (Weight per Litres)	1200.0
5 (Touch dry at 30 deg.C)	1200.0
6 (Hard Dry at 30 deg.c)	1200.0
7 (Over-coat interval)	1200.0

922

National Test House (ER), Alipore

F-8 EIL Specification No. 6-79-0020 Rev.1 (2024) - F-8 Self priming type Surface tolerant High build coal tar epoxy Coating

F-8 Self priming type Surface tolerant High build coal tar epoxy Coating

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume Solid)	2000.0
2 (Dry Film Thickness)	1200.0
3 (Theoretical Covering capacity in sq.mt/coat/litres)	1500.0
4 (Weight per Litres)	1200.0
5 (Touch dry at 30 deg.C)	1200.0
6 (Hard Dry at 30 deg.c)	1200.0
7 (Full cure at 30 deg.)	1200.0
8 (Over-coat interval)	1200.0
9 (Pot Life at 30 deg.C for Two Component Paints)	1500.0
10 (Adhesion (ASTM D 4541))	5000.0
11 (Temperature Resistance (Min))	3000.0

923

National Test House (ER), Alipore

F-2 EIL Specification No. 6-79-0020 Rev.1 (2024) - F-2 Acrylic Polyurethane Finish Paint

F-2 Acrylic Polyurethane Finish Paint

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume Solid)	2000.0
2 (Dry Film Thickness)	1200.0
3 (Theoretical Covering capacity in sq.mt/coat/litres.)	1500.0
4 (Weight per Litre)	1200.0
5 (Touch dry at 30 deg. C)	1200.0
6 (Hard Dry at 30 deg.c)	1200.0
7 (Full cure at 30 deg.C)	1200.0
8 (Over-coat interval)	1200.0
9 (Pot Life at 30 deg.C for Two Component Paints)	1500.0
10 (Adhesion (ASTM D 4541))	5000.0
11 (Abrasion Resistance (ASTM D4060))	5000.0
12 (Temperature Resistance (Min) deg. c (ASTM D 2485))	3000.0

924

National Test House (ER), Alipore

P-6 EIL Specification No. 6-79-0020 Rev. 1 - P-6 Epoxy Zinc Phosphate Primer

P-6 Epoxy Zinc Phosphate Primer

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume Solid)	2000.0
2 (Dry Film Thickness)	1200.0
3 (Therotical Covering Capacity)	1500.0
4 (Weight per Litres)	1200.0
5 (Touch dry at 30 deg.C)	1200.0
6 (Hard Dry at 30 deg.c)	1200.0
7 (Over-coat interval)	1200.0
8 (Pot Life at 30 deg.C for Two Component Paints)	1500.0
9 (Adhesion (ASTM D 4541))	5000.0
10 (Temperature Resistance (Min))	3000.0

925

National Test House (ER), Alipore

F-7 EIL SPECIFICATION for surface preparation & Protective coating System - High Build Coal Tar Epoxy Coating

High Build Coal Tar Epoxy Coating

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Volume Solid)	2000.0
2 (Dry Film Thickness)	1200.0
3 (Therotical Covering capacity in sq.mt/coat/litres.)	1500.0
4 (Weight per Litres)	1200.0
5 (Touch dry at 30 deg.C)	1200.0
6 (Hard Dry at 30 deg.c)	1200.0
7 (Full cure at 30 deg.C)	1200.0
8 (Over-coat interval)	1200.0
9 (Pot Life at 30 deg.C for Two Component Paints)	1500.0
10 (Adhesion (ASTM D 4541))	5000.0
11 (Temperature Resistance (Min))	3000.0

926

National Test House (NR), Ghaziabad

Custom NR HV TPMO - As per Customer Test Request

As per Customer Test Request

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (As per DVVNL GTP (Annexure Attached))	56000.0

927

National Test House (WR), Mumbai

IS 383 (2016) & CPWD Vol. I Specifications - Specification for Coarse & Fine Aggregate

Specification for Coarse & Fine Aggregate

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.3 (Sieve Analysis)	2000.0
2386 Part 3 (Moisture Content)	1000.0
2386 Part 3 (Specific Gravity)	500.0
CPWD Specs (Silt Content)	1000.0
MoRTH Specs (Fineness Modulus)	500.0
2386 Part 3 (Water Absorption)	1000.0
2.1 (Aggregate Crushing Value)	1500.0
3 of 2386-IV (Fine Value)	1500.0
4 of 2386-IV (Aggregate Impact Value)	1500.0
5 of 2386-IV (Aggregate Abrasion Value)	1500.0
4 of 2386 Part 1 (Flakiness Index, %)	1500.0
5 of IS 2386-I (Elongation Index, %)	1500.0
4, 5 of IS 2386 (Combined Flakiness & Elongation Indices)	3000.0
4.0 Bulking of Sand (Bulking of Sand)	1000.0
Organic Impurities (Organic Impurities)	1000.0
5.7 (Acid soluble chloride / Chloride content)	1000.0
5.7 (Sulphate Content)	1000.0
5.6 (3) (Alkali Aggregate Reaction (Accelerated Mortar Bar Method))	5000.0
5.6 (2) (Alkali Aggregate Reaction (Mortar Bar Method))	4000.0
5.6 (2) (Alkali Aggregate Reaction (Mortar Bar Method))	5000.0
506 (2) (Alkali Aggregate Reaction (Mortar Bar Method))	8000.0
5.6 (2) (Alkali Aggregate Reaction (Mortar Bar Method))	10000.0

928

National Test House (NR), Ghaziabad

IS 16985 (2018) - Duplex board/coated duplex board - Specification

Duplex board/coated duplex board - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.3 (Thickness)	1000.0
6.4 (Grammage)	1000.0
Table 1(i) (Bulk)	1000.0
Table 1(ii) (Moisture Content)	1000.0
Table 1(iii) (One minute cobb, Top)	1000.0
Table 1(iii) (One minute cobb, Back)	1000.0
Table 1(iv) (Taber Stiffness)	2000.0
Table 1(v) (Brightness)	2000.0
Table 1(vi) (Gloss)	2000.0

929

National Test House (WR), Mumbai

3670 (1989) - Construction of Timber Floors - Code of Practice

Construction of Timber Floors - Code of Practice

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.2 (Moisture Content)	1000.0
Annex D-2.2 (Modulus of Rupture, N/mm^2)	2000.0
Annex D-2.1 (Modulus of Elasticity, N/mm^2)	2000.0
Annex D-1.2 (Hardness under static indentation, N)	1500.0
- - (Test for Screw and Nail Withdrawal, N)	3000.0
- - (Test for Specific Gravity)	500.0

930

National Test House (NWR), Jaipur

IS 7904 (2018) - High carbon steel wire rods - Specification (Second Revision)

High carbon steel wire rods - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Carbon)	500.0
7 (Chromium)	500.0
7 (Sulphur)	500.0
7 (Manganese)	500.0
10 (Mechanical Properties (Tensile, Yield, Elongation & RA))	4000.0