| 4231 |
National Test House (ER), Kolkata
| IS 1065 : Part 2 (2019) - Stable bleaching powder - Specification: Part 2 treatment of water intended for drinking |
Stable bleaching powder - Specification: Part 2 treatment of water intended for drinking |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.3 (Selenium (as Se)) |
1200.0 |
|
| 5.3 (Cadmium (as Cd)) |
1200.0 |
|
| 5.3 (Mercury (as Hg)) |
1200.0 |
|
| 5.3 (Chromium (as Cr6+)) |
1200.0 |
|
| 5.3 (Manganese (as Mn)) |
1200.0 |
|
| 5.3 (Arsenic (as As)) |
1200.0 |
|
| 5.3 (Lead (as Pb)) |
1200.0 |
|
| 5.3 (Moisture) |
1200.0 |
|
| 5.3 (Stability, loss of chlorine on the basis of initial available chlorine) |
1200.0 |
|
| 5.3 (Available Chlorine ) |
1200.0 |
|
|
| 4232 |
National Test House (ER), Kolkata
| IS 1065 : Part 1 (2019) - Stable bleaching powder - Specification: Part 1 household and industrial use (Third Revision) |
Stable bleaching powder - Specification: Part 1 household and industrial use (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.3 (Moisture) |
1200.0 |
|
| 5.3 (Stability, loss of chlorine on the basis of initial available chlorine) |
1200.0 |
|
| 5.3 (Available Chlorine) |
2500.0 |
|
|
| 4233 |
National Test House (ER), Kolkata
| IS 11673 : Part 1 (2019) - Sodium hypochlorite solution - Specification: Part 1 household and industrial use (Second Revision) |
Sodium hypochlorite solution - Specification: Part 1 household and industrial use (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 4234 |
National Test House (ER), Kolkata
| IS 299 (2012) - Alumino - Ferric - Specification (Fifth Revision) |
Alumino - Ferric - Specification (Fifth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.2 (Anionic detergents (as MBAS), parts per million) |
1000.0 |
|
| 4.2 (Phenolic compounds (as C6H5OH), parts per million) |
1000.0 |
|
| 4.2 (Selenium (as Se)) |
1000.0 |
|
| 4.2 (Cadmium (as Cd)) |
500.0 |
|
| 4.2 (Chromium (as Cr)) |
500.0 |
|
| 4.2 (Manganese (as Mn)) |
500.0 |
|
| 4.2 (Mercury (as Hg)) |
1000.0 |
|
| 4.2 (Arsenic (as As2O3)) |
1000.0 |
|
| 4.2 (Lead (as Pb)) |
500.0 |
|
| 4.2 (Free acidity (As H2SO4), Basicity ( as Al2O3),) |
1000.0 |
|
| 4.2 (pH (of 5 percent aqueous solution),) |
1000.0 |
|
| 4.2 (Water soluble aluminium compounds (as Al2O3)) |
1000.0 |
|
| 4.2 (Soluble iron compound (as Fe)) |
1000.0 |
|
| 4.2 (Insouble matter) |
1000.0 |
|
|
| 4235 |
National Test House (ER), Kolkata
| IS 408 (2020) - Grease No. 0, Graphited — Specification ( Third Revision ) |
Grease No. 0, Graphited — Specification ( Third Revision ) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 3.2 & 3.5 Sl.No.ix) (Resistance to breakdown or tendency of constituents to separate) |
1200.0 |
|
| 3.2 & 3.5 Sl.No.viii (Inorganic acidity) |
1200.0 |
|
| 3.2 & 3.5 Sl.No.vii) (Graphite flake content) |
1200.0 |
|
| 3.2 & 3.5 Sl.No.vi) (Oil separation at 25 (+/- ) 0.5 dg C 168 hr) |
1200.0 |
|
| 3.2 & 3.5 Sl.No.v) (Copper strip corrosion test at 75 (+/-) 1 dg C for 24 hr) |
1200.0 |
|
| 3.2 & 3.5 Sl.No.iv) (Ash) |
1200.0 |
|
| 3.2 & 3.5 Sl.No.iii) (Drop point) |
1200.0 |
|
| 3.2 & 3.5 Sl.No.ii) (Penetration of worked material 25 +/- 0.5 dg C(60 double Stokes)) |
1200.0 |
|
| 3.2 & 3.5 Sl.No.i) (Moisture and volatile matter) |
1200.0 |
|
|
| 4236 |
National Test House (ER), Kolkata
| IS 15573 (2018) - Polyaluminium Chloride |
Polyaluminium Chloride |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4.2 (pH of 5 percent solution) |
1200.0 |
|
| 4.2 (Insoubles) |
1200.0 |
|
| 4.2 (Selenium (as Se)) |
500.0 |
|
| 4.2 (Cadmium (as Cd)) |
500.0 |
|
| 4.2 (Chromium (as Cr)) |
500.0 |
|
| 4.2 (Manganese (as Mn)) |
500.0 |
|
| 4.2 (Iron (as Fe)) |
500.0 |
|
| 4.2 (Mercury (as Hg,) |
700.0 |
|
| 4.2 (Arsenic (as As)) |
700.0 |
|
| 4.2 (Lead (as Pb)) |
700.0 |
|
| 4.2 (Bulk density) |
700.0 |
|
| 4.2 (Specific gravity at 25 deg C) |
500.0 |
|
| 4.2 (Sulphate as SO4) |
700.0 |
|
| 4.2 (Chloride as Cl) |
700.0 |
|
| 4.2 (Relative Basicity) |
1200.0 |
|
| 4.2 (Aluminium as Al2O3) |
1200.0 |
|
|
| 4237 |
National Test House (ER), Kolkata
| IS 456 (2000) - Plain and reinforced concrete - WATER FOR CONSTRUCTION (Fourth Revision) |
Plain and reinforced concrete - WATER FOR CONSTRUCTION (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.4 (pH) |
500.0 |
|
| 5.4 (Volume (in ml) of 0.02 (N) H2SO4 required for Neutralization of 100 ml water using mixed indicator.) |
500.0 |
|
| 5.4 (Volume (in ml) of 0.02 (N) NaOH required for Neutralization of 100 ml water using phenolphthalein as an indicator.) |
500.0 |
|
| 5.4 (Total dissolved solids) |
1000.0 |
|
| 5.4 (Suspended Matter) |
500.0 |
|
| 5.4 (Chlorides (as Cl)) |
1000.0 |
|
| 5.4 (Sulphates ( as SO3)) |
1000.0 |
|
| 5.4 (Total Inorganic Solids) |
500.0 |
|
| 5.4 (Total Organic Solids) |
500.0 |
|
| 5.4.1.2 (Test for Compressive strength (IS 516)) |
4000.0 |
|
| 5.4.1.3 (Initial setting time of test block with sample water compared with distilled water(IS 4031 (Part 5):1988) |
2000.0 |
|
|
| 4238 |
National Test House (ER), Kolkata
| IS 13428 (2005) - Packaged Natural Mineral Water - Specification (Second Revision) |
Packaged Natural Mineral Water - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
No Record Found
|
|
| 4239 |
National Test House (ER), Kolkata
| IS 10500 (2012) - Drinking Water - Specification (Second Revision) |
Drinking Water - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Chloride (as Cl) - IS 3025 (Part 32): 1988, Clause 2/IS 3025 (Part 75) : 2022) |
500.0 |
|
| 4 (Nickel (as Ni) - IS 3025 (Part 54):2003) |
500.0 |
|
| 4 (Molybdenum (as Mo)) |
500.0 |
|
| 4 (Mercury (as Hg) - IS 3025 (Part 48) : 1994) |
500.0 |
|
| 4 (Lead (as Pb) - IS 3025 (Part 47) : 1994) |
500.0 |
|
| 4 (Cadmium (as Cd) - IS 3025 (Part 41) : 2022) |
500.0 |
|
| 4 (Zinc (as Zn) - IS 3025 (Part 49): 1994) |
500.0 |
|
| 4 (Total Hardness (as CaCO3) - IS 3025 (Part 21) : 2009) |
500.0 |
|
| 4 (Total alkalinity as Calcium carbonate - IS 3025 (Part 23): 2023) |
400.0 |
|
| 4 (Sulphide (as H2S) - IS 3025 (Part 29) : 2022, Clause 7) |
300.0 |
|
| 4 (Sulphate (as SO4) - IS 3025 (Part 75) : 2022) |
500.0 |
|
| 4 (Silver (as Ag) - Annex J of IS 13428 : 2005) |
500.0 |
|
| 4 (Selenium (as Se) - IS 3025 (Part 56): 2003) |
500.0 |
|
| 4 (Phenolic compounds (as C6H5OH) - IS 3025 (Part 43/Sec 1): 2022, Clause 6) |
500.0 |
|
| 4 (Nitrate (as NO3) - IS 3025 (Part 75): 2022) |
500.0 |
|
| 4 (Mineral Oil - IS 3025 (Part 39): 2021, Clause 6) |
500.0 |
|
| 4 (Manganese (as Mn) - IS 3025 (Part 59): 2006) |
500.0 |
|
| 4 (Magnesium (as Mg) - IS 3025 (Part 46): 1994) |
500.0 |
|
| 4 (Iron (as Fe) - IS 3025 (Part 53) :2003, Clause 7) |
500.0 |
|
| 4 (Free residual chlorine - IS 3025( Part 26) : 2021, Clause 7) |
400.0 |
|
| 4 (Fluoride (as F) - IS 3025 (Part 75) : 2022) |
500.0 |
|
| 4 (Copper (as Cu) - IS 3025 (Part 42): 1992) |
500.0 |
|
| 4 (Calcium (as Ca) - IS 3025 (Part 40) : 1991, Clause 5) |
500.0 |
|
| 4 (Boron (as B) - IS 3025 (Part 57): 2005) |
500.0 |
|
| 4 (Barium (as Ba) - Annex F of IS 13428 : 2005) |
500.0 |
|
| 4 (Anionic detergents (as MBAS) - Annex K of IS 13428 : 2005) |
500.0 |
|
| 4 (Ammonia (as total ammonia-N) - IS 3025 (Part 34/Sec 1) : 2023, Clause 5.4) |
- |
|
| 4 (Aluminium (as Al) - IS 3025 (Part 55): 2003) |
500.0 |
|
| 4 (Total Dissolved Solids - IS 3025 (Part 16) : 2023) |
500.0 |
|
| 4 (pH value- IS 3025 (Part 11) : 2022) |
300.0 |
|
| 4 (Odour - IS 3025 (Part 5) : 2018) |
300.0 |
|
| 4 (Colour - IS 3025 (Part 4): 2021, Clause 4) |
200.0 |
|
| 4 (Taste - IS 3025 (Part 8) : 2023)) |
200.0 |
|
| 4 (Turbidity - IS 3025 (Part 10) : 2023) |
200.0 |
|
| 4.1 (Escherichia coli per 100 ml, Method: IS 15185:2016) |
1750.0 |
|
| 4.1 (Total Coliform Bacteria per 100 ml, Method: IS 15185:2016) |
1750.0 |
|
| 4 (Total Arsenic (as As) - IS 3025 (Part 37): 2022) |
500.0 |
|
| 4 (Total Chromium (as Cr) - IS 3025 (Part 52) : 2003) |
500.0 |
|
| 4 (Cyanide (as CN) - IS 3025 (Part 27/Sec 1) :2021, Clause 5)) |
500.0 |
|
| 4 (Chemical parameters as per Annexure A) |
7500.0 |
|
| Bacteriological (Bacteriological/Microbiological Test Results in Annexure) |
3500.0 |
|
|
| 4240 |
National Test House (ER), Kolkata
| IS 14543 (2024) - Packaged Drinking Water (other than Packaged Natural Mineral Water) - Specification |
Packaged Drinking Water (other than Packaged Natural Mineral Water) - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.3 (Nickel (as Ni)) |
1000.0 |
|
| 5.3 (Chromium (as Cr)) |
1000.0 |
|
| 5.3 (Lead (as Pb)) |
1000.0 |
|
| 5.3 (Cyanide (as CN)) |
2000.0 |
|
| 5.3 (Arsenic (as As)) |
2000.0 |
|
| 5.3 (Cadmium (as Cd)) |
1000.0 |
|
| 5.3 (Mercury (as Hg)) |
2000.0 |
|
| 5.3 (Bromate (as BrO3)) |
1200.0 |
|
| 5.3 (Borates (as B)) |
1000.0 |
|
| 5.3 (Antimony (as Sb)) |
1000.0 |
|
| 5.3 (Sulphide (as H2S)) |
1000.0 |
|
| 5.3 (Anionic Surface active agents (as MBAS)) |
1200.0 |
|
| 5.3 (Mineral oil) |
1000.0 |
|
| 5.3 (Phenolic compounds (as C6H5OH)) |
1000.0 |
|
| 5.3 (Residual free chlorine) |
1000.0 |
|
| 5.3 (Sodium (as Na)) |
1000.0 |
|
| 5.3 (Magnesium (as Mg)) |
1000.0 |
|
| 5.3 (Calcium (as Ca)) |
1000.0 |
|
| 5.3 (Alkalinity (as HCO3)) |
1000.0 |
|
| 5.3 (Sulphate (as SO4)) |
1200.0 |
|
| 5.3 (Selenium (as Se)) |
1000.0 |
|
| 5.3 (Chloride (as Cl)) |
1000.0 |
|
| 5.3 (Aluminium (as Al)) |
1000.0 |
|
| 5.3 (Silver (as Ag)) |
1000.0 |
|
| 5.3 (Zinc (as Zn)) |
1000.0 |
|
| 5.3 (Fluoride (as F)) |
1000.0 |
|
| 5.3 (Nitrite (as NO2)) |
1000.0 |
|
| 5.3 (Nitrate (as NO3)) |
1000.0 |
|
| 5.3 (Manganese (as Mn)) |
1200.0 |
|
| 5.3 (Iron (as Fe)) |
1200.0 |
|
| 5.3 (Copper (as Cu)) |
1200.0 |
|
| 5.3 (Barium (as Ba)) |
1000.0 |
|
| 5.3 (pH) |
1000.0 |
|
| 5.3 (Total dissolved solids) |
1000.0 |
|
| 5.3 (Turbidity) |
1000.0 |
|
| 5.3 (Taste) |
1000.0 |
|
| 5.3 (Odour) |
1000.0 |
|
| 5.3 (Colour, true colour units) |
1200.0 |
|
| 5.2.9 (Vibrio parahaemolyticus) |
1200.0 |
|
| 5.2.9 (Vibrio cholerae) |
1200.0 |
|
| 5.2.8 (Shigella) |
1200.0 |
|
| 5.2.8 (Salmonella) |
1200.0 |
|
| 5.2.7 (Yeast & Mould) |
1200.0 |
|
| 5.2.6 (Aerobic microbial count/ ml at 37° ± 1° C in 24 hours) |
1200.0 |
|
| 5.2.6 (Aerobic microbial count/ ml at 20-22 °C in 72 hours) |
1200.0 |
|
| 5.2.5 (Pseudomonas aeruginosa) |
1200.0 |
|
| 5.2.4 (Sulphite reducing Anaerobes) |
1200.0 |
|
| 5.2.3 (Staphylococcus aureus) |
1200.0 |
|
| 5.2.3 (Faecal Streptococci) |
1200.0 |
|
| 5.2.2 (Coliform) |
1200.0 |
|
| 5.2.1 (Escherichia coli) |
1200.0 |
|
| 5.4.1 (Annex D) (o, p-DDT) |
5000.0 |
|
|
| 4241 |
National Test House (ER), Kolkata
| IS 1489 (Part 1) (2015) - Portland pozzolana cement - Specification: Part 1 fly Ash Based |
Portland pozzolana cement - Specification: Part 1 fly Ash Based |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6, Table 1, Sl No 4 (Loss on ignition IS 4032:1985) |
800.0 |
|
| 6, Table 1, Sl No 1 (Insoluble residue, IS 4032:1985) |
600.0 |
|
| 6, Table 1, Sl No 6 (Alkali content IS 4032:1985) |
2000.0 |
|
| 6, Table 1, Sl No 2 (Magnesia IS 4032:1985) |
600.0 |
|
| 6, Table 1, Sl No 5 (Chloride content, IS 4032:1985) |
800.0 |
|
| 6, Table 1, Sl No 3 (Total Sulphur content IS 4032:1985) |
800.0 |
|
| 7, Table 2, Sl No 1 (Fineness IS 4031(2):1999) |
1000.0 |
|
| 7, Table 2, Sl No 6 (Drying Shrinkage IS 4031(10):1988) |
1000.0 |
|
| 7, Table 2, Sl No 4c (28 Days Compressive strength, IS 4031(6):1988) |
1000.0 |
|
| 7, Table 2, Sl No 4b (7 Days Compressive strength, IS 4031(6):1988) |
1000.0 |
|
| 7, Table 2, Sl No 4a (3 Days Compressive strength, IS 4031(6):1988) |
1000.0 |
|
| 7, Table 2, Sl No 3b (Setting time-Final IS 4031(5):1988) |
250.0 |
|
| 7, Table 2, Sl No 3a (Setting time-Initial IS 4031(5):1988) |
250.0 |
|
| 7, Table 2, Sl No 2b (Soundness-autoclave method IS 4031(3):1988) |
1000.0 |
|
| 7, Table 2, Sl No 2a (Soundness-Lechatlier method IS 4031(3):1988) |
500.0 |
|
|
| 4242 |
National Test House (ER), Kolkata
| FCO -1985 (1985) - The Fertiliser (Control) Order 1985 (as amended upto Nov 2023) |
The Fertiliser (Control) Order 1985 (as amended upto Nov 2023) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Schedule I Part A (Water soluble phosphates (as P2O5)) |
1000.0 |
|
| Schedule I Part A (Water soluble potash (as K2O)) |
1000.0 |
|
| Schedule I Part A (Water soluble Zinc (as Zn EDTA)) |
1000.0 |
|
| Schedule I Part A (Water soluble potash (as K2O)) |
1000.0 |
|
| Schedule I Part A (Water soluble phosphate (as P2O5)) |
1000.0 |
|
| Schedule I Part A (Ammoniacal nitrogen) |
1000.0 |
|
| Schedule I Part A (Nitrate nitrogen) |
1000.0 |
|
| Schedule I Part A (Total nitrogen) |
1000.0 |
|
| Schedule I Part A (Moisture) |
1000.0 |
|
| Schedule I Part A (Matter insoluble in water) |
1000.0 |
|
| Schedule I Part A (Sulphur (as S)) |
1000.0 |
|
| Schedule I Part A (Water soluble potash (as K2O)) |
1000.0 |
|
| Schedule I Part A (Water soluble phosphates (as P2O5)) |
1000.0 |
|
| Schedule I Part A (Urea nitrogen) |
1000.0 |
|
| Schedule I Part A (Sodium as NaCl) |
1000.0 |
|
| Schedule I Part A (Sodium (as NaCl) on dry basis) |
1000.0 |
|
| Schedule I Part A (Magnesium as MgO) |
1000.0 |
|
| Schedule I Part A (Total chloride (as Cl)(on dry basis)) |
1000.0 |
|
| Schedule I Part A (Water soluble calcium (as Ca)) |
1000.0 |
|
| Schedule I Part A (Particle size – Not less than 90 per cent of the material shall pass through 4 mm IS sieve and retained on 1mm IS sieve. Not more than 5 per cent shall be below 1 mm IS sieve.) |
1000.0 |
|
| Schedule I Part A (Zinc (as Zn)) |
1000.0 |
|
| Schedule I Part A (Neutral ammonium citrate soluble phosphate (as P2O5) ) |
1000.0 |
|
| Schedule I Part A (Boron (as B)) |
1000.0 |
|
| Schedule I Part A (Water soluble calcium as) |
1000.0 |
|
| Schedule I Part A (Copper (as Cu)) |
1000.0 |
|
| Schedule I Part A (Cadmium (as Cd)) |
1000.0 |
|
| Schedule I Part A (Arsenic (as As)) |
1000.0 |
|
| Schedule I Part A (Biuret) |
1000.0 |
|
| Schedule I Part A (Zinc (as Zn)) |
1000.0 |
|
| Schedule I Part A (Specific gravity (kg/l)) |
1000.0 |
|
| Schedule I Part A (Lead (as Pb)) |
1000.0 |
|
| Schedule I Part A (Free flowing form) |
1000.0 |
|
| Schedule I Part A (Ortho Silicic [Si(OH)4], Plant available Silicon (Si) equivalent) |
1200.0 |
|
| Schedule I Part A (pH) |
1000.0 |
|
| Schedule I Part A (Poly-phosphate (as P2O5)) |
1000.0 |
|
| Schedule I Part A (Acid insoluble matter) |
1000.0 |
|
| Schedule I Part A (Elemental sulphur (as S)) |
1000.0 |
|
| Schedule I Part A (Total sulphur (as S)) |
1000.0 |
|
| Schedule I Part A (Free Phosphoric Acid percent by weight ) |
1000.0 |
|
| Schedule I Part A (2 per cent citric acid soluble phosphates (as P2O5) (on dry basis)) |
1000.0 |
|
| Schedule I Part A (Neem oil content soluble in Benzene,) |
1000.0 |
|
| Schedule I Part A (Total Nitrogen (ammoniacal and urea) percent by weight) |
1500.0 |
|
| Schedule I Part A (Total Nitrogen (ammoniacal and nitrate)) |
1000.0 |
|
| Schedule I Part A (Nitrogen in the form of urea) |
1000.0 |
|
| Schedule I Part A (Magnesium (as Mg)) |
1000.0 |
|
| Schedule I Part A (Iron (as Fe)) |
1000.0 |
|
| Schedule I Part A (pH (5% solution)) |
1000.0 |
|
| Schedule I Part A (Iron content (expressed as Fe) in the form of Fe-EDTA) |
1000.0 |
|
| Schedule I Part A (Appearance – Free flowing crystalline or powder or Tablet) |
1000.0 |
|
| Schedule I Part A (Molybdenum (as Mo)) |
1000.0 |
|
| Schedule I Part A (Chloride other than ammonium chloride (as NaCI) (on dry basis)) |
1000.0 |
|
| Schedule I Part A (Sulphate Sulphur percent by weight) |
1000.0 |
|
| Schedule I Part A (Free acid (as H2SO4)) |
1000.0 |
|
| Schedule I Part A (Free acidity (as H2SO4)(0.04 for material obtained from by-product ammonia and by-product gypsum)) |
1000.0 |
|
| Schedule I Part A (Neutral ammonium citrate soluble phosphate (as P2O5)) |
1000.0 |
|
| 1(C)6 (Water soluble Calcium (as CaO)) |
1000.0 |
|
| 1(C)6 (Water soluble Magnesium (as MgO)) |
1000.0 |
|
| Schedule I Part A (Total phosphate (as P2O5)) |
1000.0 |
|
| Schedule I Part A (Sulphur (as S)) |
1000.0 |
|
| Schedule I Part A (Zinc (as Zn) percent by weight) |
1000.0 |
|
| Schedule I Part A (Boron (as B)) |
1000.0 |
|
| Schedule I Part A (Zinc content (Expressed as Zn) in the form of Zn-EDTA) |
1000.0 |
|
| Schedule I Part A (Iron content (expressed as Fe) in the form of Fe-EDTA) |
1000.0 |
|
| Schedule I Part A (Arsenic as (As2O3)) |
1000.0 |
|
| Schedule I Part A (Magnesium (as MgCl2)) |
1000.0 |
|
| 20.1 (Zn as Zn HEDP) |
1000.0 |
|
| 20.2 (Calcium Sulphate Dihydrate) |
1000.0 |
|
| 1 (Total Viable spores/count per gram of product) |
1000.0 |
|
| 1 (Physical particle size (as per TEM analysis) nm) |
1000.0 |
|
| 1 (Hydrodynamic particle size (as per DLS analysis), nm) |
1000.0 |
|
| 1 (Zeta Potential in mV (+/- scale)) |
1000.0 |
|
| 1 (Carbon (% by mass)) |
1000.0 |
|
| 1 (Carbon : Nitrogen ratio) |
1000.0 |
|
| 9 (Bulk density) |
1200.0 |
|
| 10 (Total Organic carbon (% by mass)) |
1200.0 |
|
| 11 (Manganese as Mn) |
1200.0 |
|
| 1 (Contamination level) |
1200.0 |
|
| 1 (Efficiency character) |
1000.0 |
|
| 9 (Bulk density) |
1200.0 |
|
| 10 (Total Organic carbon (% by mass)) |
1200.0 |
|
| 11 (Manganese as Mn) |
1200.0 |
|
| 1 (Contamination level) |
1200.0 |
|
| 1 (Efficiency character) |
1000.0 |
|
| Schedule I Part A (Available Phosphorous (as P2O5)) |
1000.0 |
|
| 0 (Chromium) |
1000.0 |
|
| 0 (Nickel) |
1000.0 |
|
| 0 (Mercury) |
1000.0 |
|
| 0 (Ash) |
1000.0 |
|
| 0 (Colour) |
1000.0 |
|
| 0 (Flouride) |
1000.0 |
|
|
| 4243 |
National Test House (NWR), Jaipur
| IS 7098 : Part 1 (1988) - Specification for cross linked polyethylene insulated PVC sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision) |
Specification for cross linked polyethylene insulated PVC sheathed cables: Part 1 for working voltages up to and including 1100 volts (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 15.3 (b) (High Voltage AC) |
2000.0 |
|
| 15.1.d i (Tensile strength at break-R) |
250.0 |
|
| 15.1.d i (Tensile strength at break-Y) |
250.0 |
|
| 15.1.d i (Tensile strength at break-B) |
250.0 |
|
| 15.1.d i (Tensile strength at break-Black) |
250.0 |
|
| 15.1.d i (Elongation at break-R) |
250.0 |
|
| 15.1.d i (Elongation at break-Y) |
250.0 |
|
| 15.1.d i (Elongation at break-B) |
250.0 |
|
| 15.1.d i (Elongation at break-Black) |
250.0 |
|
| 15.1.e i (Elongation at break) |
1000.0 |
|
| 15.1.e i (Tensile strength at break) |
250.0 |
|
| 15.1.d.iv (Shrinkage test-R) |
250.0 |
|
| 15.1.d.iv (Shrinkage test-Y) |
250.0 |
|
| 15.1.d.iv (Shrinkage test-B) |
250.0 |
|
| 15.1.d.iv (Shrinkage test-Black) |
2000.0 |
|
| 15.1.e iv (Shrinkage test) |
500.0 |
|
| 15.1.e vii (Thermal stability) |
500.0 |
|
| 15.1.C (Minimum thickness of insulation) |
250.0 |
|
| 15.1.C (Average thickness of insulation) |
250.0 |
|
| 15.1.C (Minimum thickness of sheath) |
250.0 |
|
| 15.1.C (Average thickness of sheath) |
250.0 |
|
| 15.1 (b) 2 iii (Torsion test for round wires) |
500.0 |
|
| 15.1 (a) iv (Resistance of conductor-R) |
500.0 |
|
| 15.1 (a) iv (Resistance of conductor-Y) |
500.0 |
|
| 15.1 (a) iv (Resistance of conductor-B) |
500.0 |
|
| 15.1 (a) iv (Resistance of conductor-Black) |
250.0 |
|
| 15.1 (b) 2 vii (Resistivity) |
250.0 |
|
| 15.1.d iii (Hot set test-Elongation under load-R) |
250.0 |
|
| 15.1.d iii (Hot set test-Elongation under load-Y) |
250.0 |
|
| 15.1.d iii (Hot set test-Elongation under load-B) |
250.0 |
|
| 15.1.d iii (Hot set test-Elongation under load-Black) |
250.0 |
|
| 15.1.d iii (Hot set test-Permanent elongation after cooling-R) |
250.0 |
|
| 15.1.d iii (Hot set test-Permanent elongation after cooling-Y) |
250.0 |
|
| 15.1.d iii (Hot set test-Permanent elongation after cooling-B) |
250.0 |
|
| 15.1.d iii (Hot set test-Permanent elongation after cooling-Black) |
250.0 |
|
| 15.1.f (Volume resistivity at ambient temperature-R) |
500.0 |
|
| 15.1.f (Volume resistivity at ambient temperature-Y) |
500.0 |
|
| 15.1.f (Volume resistivity at ambient temperature-B) |
500.0 |
|
| 15.1.f (Volume resistivity at ambient temperature-Black) |
500.0 |
|
| 15.1.f (Volume resistivity at 90 Degree C-R) |
500.0 |
|
| 15.1.f (Volume resistivity at 90 Degree C-Y) |
500.0 |
|
| 15.1.f (Volume resistivity at 90 Degree C-B) |
500.0 |
|
| 15.1.f (Volume resistivity at 90 Degree C-Black) |
2000.0 |
|
| 15.1.h (Flammability Test) |
3500.0 |
|
| 15.1.e vi (Heat shock test) |
1000.0 |
|
| 15.1.d iii (Hot set test-Elongation under load-R) |
250.0 |
|
| 15.1.d iii (Hot set test-Elongation under load-Y) |
250.0 |
|
| 15.1.d iii (Hot set test-Elongation under load-B) |
250.0 |
|
| 15.1.d iii (Hot set test-Elongation under load-Black) |
250.0 |
|
| 15.1 (b) 2 vi (Mass of Zinc coating) |
2000.0 |
|
| 15.1 (b) 2 v (Uniformity of Zinc Coating) |
1000.0 |
|
| 15.1 (a) ii (Tensile Test ) |
500.0 |
|
| 15.4 (Armour resistance test for mining cables) |
2500.0 |
|
| 15.4 (Cold impact test) |
1500.0 |
|
| 15.4 (Cold bend test) |
1000.0 |
|
| 17 & 18 (Identification, Packing & Marking) |
- |
|
| 17.3 (Marking) |
- |
|
| 15.1.f (Insulation resistance Test) |
2000.0 |
|
| 17.1 (Marking) |
- |
|
| 15.2.1.c2 (a) (Oxygen index ) |
3500.0 |
|
| 15.1.1.c2 (f) (Halogen acid gas evaluation) |
3500.0 |
|
| 15.1.1.c1 (d) (Temperature index) |
3500.0 |
|
| 15.1.d ii (Elongation at break-R) |
250.0 |
|
| 15.1.d ii (Elongation at break-Y) |
250.0 |
|
| 15.1.d ii (Elongation at break-B) |
250.0 |
|
| 15.1.d ii (Elongation at break-Black) |
250.0 |
|
| 15.1.d ii (Tensile strength at break-Black) |
250.0 |
|
| 15.1.d ii (Tensile strength at break-B) |
250.0 |
|
| 15.1.d ii (Tensile strength at break-Y) |
250.0 |
|
| 15.1.d ii (Tensile strength at break-R) |
250.0 |
|
| 15.1.e ii (Tensile strength variation) |
1000.0 |
|
| 15.1.e ii (Elongation variation) |
1000.0 |
|
| 15.1.e iii (Loss of mass in air oven) |
500.0 |
|
| 15.1.e vi (Hot deformation test Depth of indentation,) |
500.0 |
|
| 15.2 (c) (Wrapping test ( for aluminium 1) |
500.0 |
|
| 15.1 (b) 2 i (Tensile strength) |
500.0 |
|
| 15.1 (b) 2 ii (Elongation at break) |
1000.0 |
|
| 15.1 (b) 2 v (Uniformity of Zinc Coating) |
1000.0 |
|
| 15.1 (b) 2 vi (Mass of Zinc coating) |
2000.0 |
|
| 15.1.d.v (Water ahsorption (Gravimetric)) |
250.0 |
|
|
| 4244 |
National Test House (ER), Kolkata
| IS 9103 (1999) - Specification for Concrete Admixtures - |
Specification for Concrete Admixtures - |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 9 (Relative density) |
1000.0 |
|
| 9 (Dry Material content) |
1000.0 |
|
| 9 (Ash content) |
1000.0 |
|
| 9 (Chloride ion content) |
1000.0 |
|
| 9 (pH) |
1000.0 |
|
| 7.2.1 (Slump of Control Concrete Mix at 15 Minutes) |
2000.0 |
|
| 7.2.4 (Bleeding concrete additive) |
2000.0 |
|
| 8.2.2 (Comparative Flexural strength for three duration of concrete additive) |
10000.0 |
|
| 8.2.2 (Flexural strength for one duration of concrete additive) |
5000.0 |
|
| 8.2.1 (Comparative Compressive strength for one duration of concrete) |
5000.0 |
|
| 8.2.1 (Comparative Compressive strength for three duration of concrete) |
10000.0 |
|
| 7.2.3 (Setting time of concrete additive allowable Deviation from control sample) |
2000.0 |
|
| 7.2.5 (Water content of Concrete additive) |
1000.0 |
|
|
| 4245 |
National Test House (NWR), Jaipur
| IS 694 (2010) - Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1100 v (Fourth Revision) |
Polyvinyl chloride insulated unsheathed and sheathed cables/cords with rigid and flexible conductor for rated voltages up to and including 1100 v (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| Table 1 tests Sl No 1 (ii) a (Elongation property of annealed copper) |
1000.0 |
|
| Table 1 tests Sl No 1 (ii)d (Conductor resistance ) |
250.0 |
|
| Table 1. iii. e.1(2) (High voltage test DC (Core 1)) |
1000.0 |
|
| Table 1. iii. e.4(1) (Flammability Test on complete cable -Period of burning) |
500.0 |
|
| Table 1. iii. c.7 (Thermal stability test for insulation(Core 1)) |
500.0 |
|
| Table 1. iii. e.3 , ii.g (Insulation resistance test) |
2000.0 |
|
| Table 1. iii. e.3 , ii.g (Insulation resistance test) |
2000.0 |
|
| Table 1. iii. b(5) (Overall dimension) |
500.0 |
|
| Table 1. iii. c.3(3) (Variation of tensile strength after ageing for insulation(Core 1)) |
- |
|
| Table 1. iii. c.6 (Hot deformation test for insulation(Core 1)) |
250.0 |
|
| Table 1. iii. c.3(2) (Percentage elongation after ageing for insulation(Core 1)) |
500.0 |
|
| Table 1. iii. c.9 (Cold impact test for insulation(Core 1)) |
1000.0 |
|
| Table 1. iii. c.1(1) (Tensile strength for insulation(Core 1)) |
1000.0 |
|
| Table 1. iii. c.1(2) (Percentage elongation for insulation (Core 1)) |
1000.0 |
|
| Table 1 tests Sl No 1 (ii)b (Tensile strength of Aluminium wire) |
500.0 |
|
| Table 1 tests Sl No 1 (iii) C (11) (Oxygen index ) |
5000.0 |
|
| Table 1. iii. d.1(1) (Tensile strength for sheath) |
- |
|
| Table 1. iii. c.14 (Smoke density test for insulation (Core 1)) |
5000.0 |
|
| Table 1. iii. c.10(1) (Flammability test for insulation-Unaffected portion from the lower edge the top clamp(Core 1)) |
500.0 |
|
| Table 1. iii. c.10(2) (Flammability test for insulation-Period of burning (Core 1)) |
750.0 |
|
| Table 1. iii. c.4 (Shrinkage test for insulation(Core 1)) |
500.0 |
|
| Table 1. iii. c.5 (Heat shock test for insulation(Core 1)) |
250.0 |
|
| Table 1. iii. c.3(4) (Variation in percentage elongation after ageing for insulation (Core 1)) |
- |
|
| Table 1. iii. c.7 (Thermal stability test for insulation(Core 1)) |
500.0 |
|
| Table 1. iii. c.8 (Cold bend test for insulation(Core 1)) |
1000.0 |
|
| Table 1. iii. c.9 (Cold impact test for insulation(Core 1)) |
1000.0 |
|
| Table 1. iii. c.12 (Test temperature index for insulation(Core 1)) |
5000.0 |
|
| Table 1. iii. d.2 (Loss of mass test for sheath) |
- |
|
| Table 1. iii. d.3(1) (Tensile strength after ageing for sheath) |
- |
|
| Table 1. iii. d.3(2) (Percentage Elongation after ageing for sheath) |
- |
|
| Table 1. iii. d.3(4) (Variation in percentage elongation after ageing for sheath) |
- |
|
| Table 1. iii. d.4 (Shrinkage test for sheath) |
- |
|
| Table 1. iii. d.5 (Heat shock test for sheath) |
- |
|
| Table 1. iii. d.6 (Hot deformation test for sheath) |
- |
|
| Table 1. iii. d.7 (Thermal stability for sheath) |
- |
|
| Table 1. iii. d.8 (Oxygen index for sheath) |
5000.0 |
|
| Table 1. iii. d.10 (Test for halogen acid gas evaluation for sheath) |
5000.0 |
|
| Table 1. iii. d.9 (Test for temperature index for sheath) |
5000.0 |
|
| Table 1. iii. e.1(1) (High voltage test (water immersion test)) |
3000.0 |
|
| Table 1. iii. e.4 (High voltage test (Cl. 10.2)(at room temperature)) |
1500.0 |
|
| 15 (Marking of the cable) |
1500.0 |
|
| 12 (CORE IDENTIFICATION) |
100.0 |
|
| 11.2 (Legibility of marking) |
100.0 |
|
| 11.1 (Durability of marking) |
100.0 |
|
| 11 (Cable identification) |
200.0 |
|
| 9.1 (Ovality) |
100.0 |
|
| 9 (DIMENSIONS) |
250.0 |
|
| 8.3 (Thickness) |
250.0 |
|
| 8.2 (Application ) |
250.0 |
|
| 8.1 (Material) |
100.0 |
|
| 7 (Binder tape material) |
100.0 |
|
| 6.1 (Material) |
100.0 |
|
| 5.3 (Thickness of Insulation) |
100.0 |
|
| 5.2 (Application to the Conductor) |
250.0 |
|
| 5.1 (INSULATION TYPE) |
100.0 |
|
| 4.1 (Material) |
100.0 |
|
|
| 4246 |
National Test House (ER), Kolkata
| IS 1239 : Part 1 (2004) - Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes (BI-LINGUAL) |
Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes (BI-LINGUAL) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 14.3 (Flattening Test on tube above 50 mm NB) |
1000.0 |
|
| 8.1 (Mass per meter) |
1000.0 |
|
| 8 (Dimensions) |
1000.0 |
|
| 14.1.1 (% Elongation on gauge length of 5.65 x Sq. root area) |
1000.0 |
|
| 14.1 (Tensile Strength) |
2000.0 |
|
| 6.1.1 (Chemical composition (Carbon)) |
625.0 |
|
| 6.1.1 (Chemical composition (Manganese)) |
625.0 |
|
| 6.1.1 (Chemical composition (Sulphur)) |
625.0 |
|
| 6.1.1 (Chemical composition (Phosphorus)) |
625.0 |
|
| 12 (Galvanizing (Mass of Zinc coating)) |
2000.0 |
|
| 12 (Galvanizing (Uniformity of Zinc coating)) |
1000.0 |
|
| 14.2 (Bend test on tube (upto and including 50 mm NB)) |
1000.0 |
|
|
| 4247 |
National Test House (ER), Kolkata
| IS 8329 (2000) - Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision) |
Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 15.1.1 (External diameter) |
1000.0 |
|
| 13.3 (Wall Thickness of pipe) |
1000.0 |
|
| 16.3 (Thickness of Cement mortar lining of pipe) |
1000.0 |
|
| 15.3 (Ovality of pipe) |
1000.0 |
|
| 10.2 (Brinell Hardness) |
2000.0 |
|
| 10.1.1 (Percent Elongation) |
1500.0 |
|
| 10.1.1 (Tensile Strength) |
2000.0 |
|
| 13.2 (Bore Clearance of mortar lining in ductile iron pipe) |
1000.0 |
|
| 11.1 (Hydrostatic test at site) |
5000.0 |
|
| A-1 (Pipe surface condition at site) |
1000.0 |
|
|
| 4248 |
National Test House (ER), Kolkata
| IS 1367 : Part 6 (2018) - Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision) |
Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7 (Hardness Test) |
2000.0 |
|
| 7 (Proof Load) |
3000.0 |
|
| 6 (Carbon, % by mass) |
500.0 |
|
| 6 (Sulphur, % by mass) |
500.0 |
|
| 6 (Phosphorus, % by mass) |
500.0 |
|
| 6 (Manganese, % by mass) |
500.0 |
|
|
| 4249 |
National Test House (ER), Kolkata
| IS 1367 : Part 3 (2017) - Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision) |
Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7 (Hardness Test) |
2000.0 |
|
| 7 (Proof Load, N.) |
3000.0 |
|
| 7 (Tensile load, N.) |
3000.0 |
|
| 2 (Dimensions) |
1500.0 |
|
| 5 (Surface Integrity) |
1200.0 |
|
| 6 (Carbon, % by mass) |
500.0 |
|
| 6 (Phosphorus, % by mass) |
500.0 |
|
| 6 (Sulphur, % by mass) |
500.0 |
|
| 9.7.1 (Tensile Strength on Machined Test Piece, MPa.) |
1000.0 |
|
| 9.7.1a (Yield Strength on Machined Test Piece, MPa.) |
1000.0 |
|
| 9.7.1b (Percentage Elongation on Machined Test Piece, %.) |
1000.0 |
|
| 9.14 (Impact Strength at (-) 20⁰C) |
5000.0 |
|
| 1 (% Reduction in Area) |
1000.0 |
|
| 0 (Shear test on machined test piece) |
3000.0 |
|
|
| 4250 |
National Test House (ER), Kolkata
| IS 6006 (2014) - Uncoated stress relieved strand for prestressed concrete - Specification (Second Revision) |
Uncoated stress relieved strand for prestressed concrete - Specification (Second Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.3 (Elongation) |
1000.0 |
|
| 7.3 (0.2% Proof Load) |
1000.0 |
|
| 7.3 (Breaking Strenth) |
3000.0 |
|
| 5.3 (Nominal Mass) |
1500.0 |
|
| 5.3 (Nominal Area ) |
1000.0 |
|
| 5.3 (Nominal Diameter ) |
1000.0 |
|
| 5.1 (Dimension 3- Ply 3mm strand: Nominal Diameter of element wire) |
500.0 |
|
| 3.1.2 (Sulphur, % by mass.) |
750.0 |
|
| 3.1.2 (Phosphorus) |
500.0 |
|
| 4.2 (Length of lay of 3- Ply 3mm strand: 24-36 time of dia of element wire) |
1000.0 |
|
|
| 4251 |
National Test House (NWR), Jaipur
| IS 14543 (2024) - Packaged Drinking Water (other than Packaged Natural Mineral Water) - Specification |
Packaged Drinking Water (other than Packaged Natural Mineral Water) - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5.4.1 (Annex D) (Alpha-Endosulfan) |
5000.0 |
|
| 5.4.1 (Annex D) (Beta-Endosulfan) |
5000.0 |
|
| 5.4.1 (Annex D) (Endosulfan sulphate) |
5000.0 |
|
| 5.4.1 (Annex D) (Malaxon) |
5000.0 |
|
| 5.4.1 (Annex D) (Malathion) |
5000.0 |
|
| 5.4.1 (Annex D) (Paraxon methyl) |
5000.0 |
|
| 5.4.1 (Annex D) (o, p-DDE) |
5000.0 |
|
| 5.4.1 (Annex D) (o, p-DDT) |
5000.0 |
|
| 5.4.1 (Annex D) (p, p-DDE) |
5000.0 |
|
| 5.4.1 (Annex D) (p, p-DDT) |
5000.0 |
|
| 5.4.1 (Annex D) (Phorate) |
5000.0 |
|
| 5.4.1 (Annex D) (Phorate sulfone) |
5000.0 |
|
| 5.4.1 (Annex D) (Phorate sulfoxide) |
5000.0 |
|
| 5.4.1 (Annex D) (2,4-D) |
5000.0 |
|
| 5.4.1 (Annex D) (Alachlor) |
5000.0 |
|
| 5.4.1 (Annex D) (Aldrin) |
5000.0 |
|
| 5.4.1 (Annex D) (Αlpha-HCH) |
5000.0 |
|
| 5.4.1 (Annex D) (Atrazine) |
5000.0 |
|
| 5.4.1 (Annex D) (Βeta-HCH) |
5000.0 |
|
| 5.4.1 (Annex D) (Butachlor) |
5000.0 |
|
| 5.4.1 (Annex D) (Chloropyrifos) |
5000.0 |
|
| 5.4.1 (Annex D) (Delta-HCH) |
5000.0 |
|
| 5.4.1 (Annex D) (Dieldrin) |
5000.0 |
|
| 5.4.1 (Annex D) (Ethion) |
5000.0 |
|
| 5.4.1 (Annex D) (Gamma-HCH) |
5000.0 |
|
| 5.4.1 (Annex D) (Isoproturon) |
5000.0 |
|
| 5.4.1 (Annex D) (Methyl parathion) |
5000.0 |
|
| 5.4.1 (Annex D) (Monocrotophos) |
5000.0 |
|
| 5.4.1 (Annex D) (o, p-DDD) |
5000.0 |
|
| 5.4.1 (Annex D) (p, p-DDD) |
5000.0 |
|
| 5.3 (Polychlorinated biphenyls (PCB)) |
2000.0 |
|
| 5.3 (Polynuclear aromatic hydrocarbons (PAH)) |
2000.0 |
|
| 5.4 (Total pesticide residue) |
5000.0 |
|
| 5.3 (Bromate (as BrO3)) |
1200.0 |
|
| 5.3 (Alkalinity (as HCO3)) |
1000.0 |
|
| 5.3 (Aluminium (as Al)) |
1000.0 |
|
| 5.3 (Anionic Surface active agents (as MBAS)) |
1200.0 |
|
| 5.3 (Antimony (as Sb)) |
1000.0 |
|
| 5.3 (Arsenic (as As)) |
2000.0 |
|
| 5.3 (Barium (as Ba)) |
1000.0 |
|
| 5.3 (Borates (as B)) |
1000.0 |
|
| 5.3 (Cadmium (as Cd)) |
1000.0 |
|
| 5.3 (Calcium (as Ca)) |
1000.0 |
|
| 5.3 (Chloride (as Cl)) |
1000.0 |
|
| 5.3 (Chromium (as Cr)) |
1000.0 |
|
| 5.3 (Colour, true colour units) |
1200.0 |
|
| 5.3 (Copper (as Cu)) |
1200.0 |
|
| 5.3 (Cyanide (as CN)) |
2000.0 |
|
| 5.3 (Iron (as Fe)) |
1200.0 |
|
| 5.3 (Lead (as Pb)) |
1000.0 |
|
| 5.3 (Magnesium (as Mg)) |
1000.0 |
|
| 5.3 (Manganese (as Mn)) |
1200.0 |
|
| 5.3 (Mercury (as Hg)) |
2000.0 |
|
| 5.3 (Mineral oil) |
1000.0 |
|
| 5.3 (Nickel (as Ni)) |
1000.0 |
|
| 5.3 (Nitrate (as NO3)) |
1000.0 |
|
| 5.3 (Nitrite (as NO2)) |
1000.0 |
|
| 5.3 (Odour) |
1000.0 |
|
| 5.3 (pH) |
1000.0 |
|
| 5.3 (Phenolic compounds (as C6H5OH)) |
1000.0 |
|
| 5.3 (Residual free chlorine) |
1000.0 |
|
| 5.3 (Selenium (as Se)) |
1000.0 |
|
| 5.3 (Silver (as Ag)) |
1000.0 |
|
| 5.3 (Sodium (as Na)) |
1000.0 |
|
| 5.3 (Sulphate (as SO4)) |
1200.0 |
|
| 5.3 (Sulphide (as H2S)) |
1000.0 |
|
| 5.3 (Taste) |
1000.0 |
|
| 5.3 (Total dissolved solids) |
1000.0 |
|
| 5.3 (Zinc (as Zn)) |
1000.0 |
|
| 5.3 (Fluoride (as F)) |
1000.0 |
|
| 5.3 (Turbidity) |
1000.0 |
|
| 5.2.1 (Escherichia coli) |
1200.0 |
|
| 5.2.2 (Coliform) |
1200.0 |
|
| 5.2.4 (Sulphite reducing Anaerobes) |
1200.0 |
|
| 5.2.5 (Pseudomonas aeruginosa) |
1200.0 |
|
| 5.2.6 (Aerobic microbial count/ ml at 20-22 °C in 72 hours) |
1200.0 |
|
| 5.2.6 (Aerobic microbial count/ ml at 37° ± 1° C in 24 hours) |
1200.0 |
|
| 5.2.7 (Yeast & Mould) |
1200.0 |
|
| 5.2.8 (Salmonella) |
1200.0 |
|
| 5.2.8 (Shigella) |
1200.0 |
|
| 5.2.9 (Vibrio cholerae) |
1200.0 |
|
| 5.2.9 (Vibrio parahaemolyticus) |
1200.0 |
|
| 5.2.3 (Faecal Streptococci) |
1200.0 |
|
| 5.2.3 (Staphylococcus aureus) |
1200.0 |
|
|
| 4252 |
National Test House (NWR), Jaipur
| IS 6012 (1992) - Measurement of coating thickness by eddy current method (First Revision) |
Measurement of coating thickness by eddy current method (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| IS 6012 (Coating thickness) |
2000.0 |
|
| IS 6012 (Coating thickness) |
2000.0 |
|
|
| 4253 |
National Test House (NWR), Jaipur
| IS 15658 (2021) - Concrete Paving Blocks - Specification ( First Revision ) |
Concrete Paving Blocks - Specification ( First Revision ) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.3, Table 3, Sl No (i) (Water Absorption-IS 15658:2021, Annex C) |
1000.0 |
|
| 7.3, Table 3, Sl No (ii) (Compressive Strength-IS 15658:2021, Annex D) |
4000.0 |
|
| 7.1 (General quality & Finish-IS 15658:2021) |
1000.0 |
|
| 7.3, Table 3, Sl No (iv) (Tensile Splitting Strength-IS 15658:2021, Annex F) |
4000.0 |
|
| 7.3, , Table 3, Sl No (v) (Flexural strength-IS 15658:2021, Annex G) |
4000.0 |
|
| 7.3, Table 3, Sl No (iii) (Abrasion Resistance-(Wet condition)-IS 15658:2021, Annex E) |
4000.0 |
|
| 7.3, Table 3, Sl No (iii) (Abrasion Resistance-(Dry condition)-IS 15658:2021, Annex E) |
4000.0 |
|
| 7.2, Table2 (Dimensions & Tolerances-IS 15658:2021, Annex B) |
3000.0 |
|
|
| 4254 |
National Test House (NWR), Jaipur
| IS 15622 (2017) - Pressed Ceramic Tiles - Specification (First Revision) |
Pressed Ceramic Tiles - Specification (First Revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 6, Tables 5 to 9, Sl No (ii), (a) (Water Absorption-IS13630 (Part 2):2019) |
1000.0 |
|
| 6, Tables 5 to 9, Sl No (ii), (b) (Modulus of rupture in N/mm²- IS13630 (Part6):2019) |
2000.0 |
|
| 6, Tables 5 to 9, Sl No (ii), (d) (Moisture expansion in mm/m-IS13630 (Part 3):2019) |
1000.0 |
|
| 6, Tables 5 to 9, Sl No (ii), (e) (Scratch Hardness of surface (Mohs' Scale)-IS13630 (Part 13):2019) |
2000.0 |
|
| 6, Tables 5 to 9, Sl No (ii), (g) (Coefficient of Linear thermal expansion from ambient temperature to 100° C(K raise to -1)-IS 13630 (Part 4):2019) |
1000.0 |
|
| 6, Tables 5 to 9, Sl No (ii), (j) (Crazing Resistance- IS13630 (Part 9):2019) |
1500.0 |
|
| 6, Tables 5 to 9, Sl No (ii), (k) (Impact resistance-Coefficient of Restitution-IS13630 (Part 14):2019) |
1000.0 |
|
| 6, Tables 8 and 9, Sl No (ii), (q) (Bulk Density-IS13630 (Part 2):2019) |
1000.0 |
|
| 6, Tables 5 to 9, Sl No (i), (b) (Dimension-Thickness-Deviation in percent from work size -IS: 13630 (Part1):2019) |
1000.0 |
|
| 6, Tables 5 to 9, Sl No (i), (a) (Dimensions-Length-IS13630 (Part1):2019) |
1000.0 |
|
| 6, Tables 5 to 9, Sl No (i), (a) (Dimensions-Width -IS:13630 (Part1):2019) |
1000.0 |
|
| 6, Tables 5 to 9, Sl No (i), (f) (Surface Quality-IS13630 (Part1):2019) |
500.0 |
|
| 6, Tables 5 to 9, Sl No (i), (d) (Rectangularity-Maximum deviation in percent to corresponding work size-IS: 13630 (Part1):2019) |
500.0 |
|
| 6, Tables 5 to 9, Sl No (i), (c) (Straightness of sides(Facial sides)Maximum deviation in percent to corresponding work size- IS13630 (Part1):2019) |
500.0 |
|
| 6, Tables 5 to 9, Sl No (i), (e-1,2,3) (Surface Flatness-Maximum deviation in percent from flatness-(Centre curvature, Edge curvature & warpage) -IS: 13630 (Part1):2019) |
500.0 |
|
| 6, Table 9, Sl No (iii), (a, b, c)-1(Part 8) (Chemical properties-glazed- IS13630 (Part 8):2019) |
5000.0 |
|
| 6, Tables 5 to 9, Sl No (ii), (c) (Breaking of strength in N- IS13630 (Part 6):2019) |
2000.0 |
|
|
| 4255 |
National Test House (NWR), Jaipur
| IS 14587 (1998) - Prelaminated Medium Density Fibre Board -specification |
Prelaminated Medium Density Fibre Board -specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 10.3 (Moisture Content-IS 2380 (Part 3):1977) |
1000.0 |
|
| 10.2, Table 1, Sl No 1.1 (Density-IS 2380 (Part 3):1977) |
500.0 |
|
| 10.4, Table 1, Sl No 1.2 (Water Absorption-IS 2380 (Part 16):1977) |
1000.0 |
|
| 10.5,Table 1, Sl No 1.3 (Thickness swelling-IS 2380 (Part 17):1977) |
1500.0 |
|
| 10.7, Table 1, Sl No 1.6 (Tensile strength perpendicular to surface-IS 2380 (Part 5):1977) |
2000.0 |
|
| 10. 8, Table 1, Sl No 1.7 (Tensile strength perpendicular to surface after ageing-IS 14587:1998 & -IS 2380 (Part 5):1977) |
2000.0 |
|
| 10.10, Table 1, Sl No 1.9 (Resistance to Surface Abrasion-IS 14587:1998 Annex B) |
5000.0 |
|
| 10.11 (Resistance to Steam-IS 14587:1998 Annex C) |
500.0 |
|
| 10.12 (Resistance to Crack-IS 14587:1998 Annex D) |
500.0 |
|
| 10.13 (Resistance to Cigarette Burn-IS 14587:1998 Annex E) |
500.0 |
|
| 10.14 (Resistance to Stain-IS 14587:1998 Annex F) |
1500.0 |
|
| 8 (Dimension & Tolerances-IS 12406) |
500.0 |
|
| 10.6, Table 1, Sl No 1.4 & 1.5 (Modulus of Rupture and Modulus of Elasticity-IS 2380 (Part 4):1977) |
2500.0 |
|
| 10. 9, Table 1, Sl No 1.8 (Screw Withdrawal Test -IS 2380 (Part 14):1977) |
1500.0 |
|
|
| 4256 |
National Test House (NWR), Jaipur
| IS 14223 : Part 1 (1995) - Polished Building Stones: Part 1 Granite |
Polished Building Stones: Part 1 Granite |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 5 (Moisture content) |
500.0 |
|
| 5 (Dry density ) |
1000.0 |
|
| 5 (Specific gravity) |
1000.0 |
|
| 5 (Water absorption) |
1000.0 |
|
| 5 (Porosity) |
1000.0 |
|
| 5 (Compressive strength) |
2000.0 |
|
| 5 (Hardness) |
2000.0 |
|
| 5 (Resistance to wear) |
4000.0 |
|
| 4 (Dimensions) |
500.0 |
|
|
| 4257 |
National Test House (NWR), Jaipur
| IS 1237 (2012) - Cement Concrete Flooring Tiles - Specification |
Cement Concrete Flooring Tiles - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 12.5 (Water Absorption-Annex E of IS 1237:2012) |
1000.0 |
|
| 10 (General Quality-IS 1237:2012) |
100.0 |
|
| 12.6 (Wet transverse strength-Annex F of IS 1237:2012) |
2000.0 |
|
| 8.3 & Table2 (The thickness of Wearing Layer-IS 1237:2012) |
100.0 |
|
| 12.2 (Flatness-Annex B of IS 1237:2012) |
500.0 |
|
| 12.4 (Straightness-Annex D of IS 1237:2012) |
500.0 |
|
| 12.3 (Perpendicularity-Annex C of IS 1237:2012) |
500.0 |
|
| 7 & 8.1, Table1 (Dimensions & Tolerances-IS 1237:2012) |
200.0 |
|
| 7, 8.2 & Table1 (Thickness & Tolerances-IS 1237:2012) |
100.0 |
|
|
| 4258 |
National Test House (NWR), Jaipur
| IS 12894 (2002) - Pulverized fuel ash - Lime bricks - Specification |
Pulverized fuel ash - Lime bricks - Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 7.4 (Water Absorption) |
1000.0 |
|
| 7.3 (Efforescence) |
1000.0 |
|
| 3 (General quality) |
500.0 |
|
| 7.1 (Crushing Strength) |
2000.0 |
|
| 5 (Dimensions) |
500.0 |
|
| 7.2 (Drying Shrinkage) |
2000.0 |
|
|
| 4259 |
National Test House (NWR), Jaipur
| IS 12823 (2015) - Wood Products - Prelaminated Particle Boards -Specification |
Wood Products - Prelaminated Particle Boards -Specification |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 10.3 (Moisture Content-IS 2380 (Part 3):1977) |
1000.0 |
|
| 8 (Dimension & Tolerances-IS 12823:2015 Annex B) |
500.0 |
|
| 10.2, Table 2, Sl No (i) & (ii) (Density-IS 2380 (Part 3):1977) |
500.0 |
|
| 10.4 Table 2, Sl No (iii) (Water Absorption-IS 2380 (Part 16):1977) |
1000.0 |
|
| 10.5 Table 2, Sl No (iv) (Swelling in Water-IS 2380 (Part 17):1977) |
1000.0 |
|
| 10.6Table 2, Sl No (v) (Modulus of Rupture & Modulus of Elasticity-IS 2380 (Part 4):1977) |
2500.0 |
|
| 10.7 Table 2, Sl No (vi) (Tensile strength perpendicular to surface-IS 2380 (Part 5):1977) |
2000.0 |
|
| 10.8, Table 2, Sl No (vii) (Tensile strength perpendicular to surface after ageing-IS 12823:2015 &-IS 2380 (Part 5):1977) |
2000.0 |
|
| 10.9, Table 2, Sl No (viii) (Screw Withdrawal Strength -IS 2380 (Part 14):1977) |
1500.0 |
|
| 10.10 Table 2, Sl No (ix) (Abrasion Resistance-IS 12823:2015 Annex C) |
5000.0 |
|
| 10.11 (Resistance to Steam-IS 12823:2015 Annex D) |
500.0 |
|
| 10.12 (Resistance to Crack-IS 12823:2015 Annex E) |
500.0 |
|
| 10.13 (Resistance to Cigarette Burn-IS 12823:2015 Annex F) |
500.0 |
|
| 10.14 (Resistance to Stain-IS 12823:2015 Annex G) |
1500.0 |
|
|
| 4260 |
National Test House (SR), Chennai
| IS 14252 (2015) - Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision) |
Textiles – High density polyethylene (HDPE)/ polypropylene (PP) woven sack for filling sand – Specification (second revision) |
- View breakup
-
| Clause No. |
Testing Charges (Excl. Of Taxes) |
NABL |
| 4 (Avg. Breaking Strength of fabric after UV exposure) |
2000.0 |
|
| 4 (Elongation at break of fabric, Widthwise) |
500.0 |
|
| 4 (Elongation at break of fabric, Lengthwise) |
500.0 |
|
| 4 (Average Breaking Strength of bottom seam) |
2000.0 |
|
| 4 (Avg. Breaking Strength of fabric, Widthwise) |
1000.0 |
|
| 4 (Avg. Breaking Strength of fabric, Lengthwise) |
1000.0 |
|
| 4 (Mass of Sack (without tying cord)) |
1000.0 |
|
| 4 (Picks/dm) |
500.0 |
|
| 4 (Ends/dm) |
500.0 |
|
| 4 (Dimensions, Outside Width) |
500.0 |
|
| 4 (Dimensions, Outside Length) |
500.0 |
|
| 4 (Mass of Bale) |
2000.0 |
|
| 3.3 (Tying cord Material Identification) |
2000.0 |
|
| 3.4.1 (Mouth of Sack, Channel secured with ) |
2000.0 |
|
| 3.4.1 (Mouth of Sack, Channel withturn-in) |
2000.0 |
|
| 3.4.1 (Mouth of Sack, Channel width) |
2000.0 |
|
| 3.4.1 (Bottom Seam, Number of Stitchs per dm) |
2000.0 |
|
| 3.4.1 (Bottom Seam, Double fold seam depth) |
2000.0 |
|
| 3.4.1 (Bottom Seam, Outer stitch distance from outer edge) |
2000.0 |
|
| 3.4.1 (Bottom Seam, Two row separation distance) |
2000.0 |
|
|
