NTH - Management Information System

National Test House (ER), Kolkata

Block-C.P, Sector-V, Salt Lake City, Kolkata, West Bengal - 700091, Kolkata, Kolkata, West Bengal, 700091

- director-kol[at]nth[dot]gov[dot]in

Scope List

Reset

1274 Results

S.No.

Standard No.

Product

Testing Charges (Excl. Of Taxes)

1231

IS 1350 : Part 2 (1970) - Determination of Calorific value

Determination of Calorific value

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.5 (Gross Calorific Value (Adiabatic calorimeter method))	2000.0

1232

IS 1350 : Part 1 (1984) - Methods of test for coal and coke: Part 1 proximate analysis (Second Revision)

Methods of test for coal and coke: Part 1 proximate analysis (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8 (Determination of ash)	1000.0
7 (Determination of volatile matter)	1000.0
6 (Determination of moisture)	1000.0
9.1.3 (Fixed Carbon)	1000.0

1233

IS 73 (2013) - Paving bitumen - Specification (Fourth Revision)

Paving bitumen - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.2(vi) (Softening Point (R&B))	1200.0
6.2(v) (Solubility in TCE)	1200.0
6.2(iv) (Flash Point, cleveland Open cup)	1200.0
6.2 (i) (Penetration,25 dg 100g 5sec 0.1 mm)	1200.0

1234

IS 737 (2024) - Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes - Specification (Fourth Revision)

Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes - Specification (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Chromium)	1000.0
7 (Manganese)	1000.0
7 (Magnesium)	1000.0
7 (Iron)	1000.0
7 (Copper)	1000.0
7 (Zinc)	1000.0
7 (Titanium)	1000.0
7 (Silicon)	1000.0
7 (Aluminium)	1000.0
8.1 (Tensile Strength)	1000.0
8.1 (0.2% Proof Stress)	1000.0
8.1 (% Elongation at 50 mm gauge length)	500.0
8.2 (Bend Test)	1000.0
10 (Dimensions)	1000.0

1235

IS 455 (2015) - Portland slag cement - Specification

Portland slag cement - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6 (Insoluble residue)	700.0
6 (Sulphide Sulphur (S))	700.0
6 (Magnesia)	700.0
6 (Loss on Ignition)	700.0
6 (Chloride content)	700.0
6 (Alkali content)	1000.0
6 (Total Sulphur content calculated as sulphuric anhydride SO3)	500.0
7 (Fineness)	1000.0
7 (Soundness-Lechatlier method)	500.0
7 (Soundness-autoclave method)	1000.0
7 (Setting time Initial)	250.0
7 (Setting time,Final)	250.0
7 (3 Days Compressive strength,72±1 h)	1000.0
7 (7 Days Compressive strength,168±2 h)	1000.0
7 (28 Days Compressive strength,672±4 h)	1000.0

1236

IS 9925 (2024) - Determination of Gold and Silver in Gold and Silver Thread and Embroidery Materials-Method

Determination of Gold and Silver in Gold and Silver Thread and Embroidery Materials-Method

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Gold)	2000.0
5 (Silver)	2000.0

1237

IS 333 (1980) - Specification for potassium permanganate (Second Revision)

Specification for potassium permanganate (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1238

IS 266 (1993) - Sulphuric acid - Specification (Third Revision)

Sulphuric acid - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (Nitrates, nitrites & ammonia (as N))	1000.0
4.2 (Zinc (as Zn))	1000.0
4.2 (Copper (as Cu))	1000.0
4.2 (Manganese (as Mn))	1000.0
4.2 (Ammonia (as NH3))	1000.0
4.2 (Nitrates (as NO3))	1000.0
4.2 (Organic matter)	1000.0
4.2 (Oxidizable impurities (as SO2))	1000.0
4.2 (Arsenic (as As))	1000.0
4.2 (Lead (as Pb))	1000.0
4.2 (Chlorides (as Cl))	1000.0
4.2 (Iron (as Fe))	1000.0
4.2 (Residue on ignition)	1000.0
4.2 (Total Acidity (as H2SO4))	1000.0

1239

IS 1540 : Part 2 (1990) - Quicklime and hydrated lime for chemical industries - Specification: Part 2 hydrated lime (Third Revision)

Quicklime and hydrated lime for chemical industries - Specification: Part 2 hydrated lime (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Available Lime (as Ca(OH)2)	1000.0

1240

IS 1540 : Part 1 (1980) - Specification for quick lime and hydrated lime for chemical industries: Part 1 quick lime (Second Revision)

Specification for quick lime and hydrated lime for chemical industries: Part 1 quick lime (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1241

IS 249 (1979) - Specification for sodium bichromate, technical (Third Revision)

Specification for sodium bichromate, technical (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1242

IS 16556 (2016) - Municipal solid waste compost, manure grade - Specification

Municipal solid waste compost, manure grade - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1243

IS 1065 : Part 2 (2019) - Stable bleaching powder - Specification: Part 2 treatment of water intended for drinking

Stable bleaching powder - Specification: Part 2 treatment of water intended for drinking

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.3 (Selenium (as Se))	1200.0
5.3 (Cadmium (as Cd))	1200.0
5.3 (Mercury (as Hg))	1200.0
5.3 (Chromium (as Cr6+))	1200.0
5.3 (Manganese (as Mn))	1200.0
5.3 (Arsenic (as As))	1200.0
5.3 (Lead (as Pb))	1200.0
5.3 (Moisture)	1200.0
5.3 (Stability, loss of chlorine on the basis of initial available chlorine)	1200.0
5.3 (Available Chlorine )	1200.0

1244

IS 1065 : Part 1 (2019) - Stable bleaching powder - Specification: Part 1 household and industrial use (Third Revision)

Stable bleaching powder - Specification: Part 1 household and industrial use (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.3 (Moisture)	1200.0
5.3 (Stability, loss of chlorine on the basis of initial available chlorine)	1200.0
5.3 (Available Chlorine)	2500.0

1245

IS 11673 : Part 1 (2019) - Sodium hypochlorite solution - Specification: Part 1 household and industrial use (Second Revision)

Sodium hypochlorite solution - Specification: Part 1 household and industrial use (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1246

IS 299 (2012) - Alumino - Ferric - Specification (Fifth Revision)

Alumino - Ferric - Specification (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (Anionic detergents (as MBAS), parts per million)	1000.0
4.2 (Phenolic compounds (as C6H5OH), parts per million)	1000.0
4.2 (Selenium (as Se))	1000.0
4.2 (Cadmium (as Cd))	500.0
4.2 (Chromium (as Cr))	500.0
4.2 (Manganese (as Mn))	500.0
4.2 (Mercury (as Hg))	1000.0
4.2 (Arsenic (as As2O3))	1000.0
4.2 (Lead (as Pb))	500.0
4.2 (Free acidity (As H2SO4), Basicity ( as Al2O3),)	1000.0
4.2 (pH (of 5 percent aqueous solution),)	1000.0
4.2 (Water soluble aluminium compounds (as Al2O3))	1000.0
4.2 (Soluble iron compound (as Fe))	1000.0
4.2 (Insouble matter)	1000.0

1247

IS 408 (2020) - Grease No. 0, Graphited — Specification ( Third Revision )

Grease No. 0, Graphited — Specification ( Third Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.2 & 3.5 Sl.No.ix) (Resistance to breakdown or tendency of constituents to separate)	1200.0
3.2 & 3.5 Sl.No.viii (Inorganic acidity)	1200.0
3.2 & 3.5 Sl.No.vii) (Graphite flake content)	1200.0
3.2 & 3.5 Sl.No.vi) (Oil separation at 25 (+/- ) 0.5 dg C 168 hr)	1200.0
3.2 & 3.5 Sl.No.v) (Copper strip corrosion test at 75 (+/-) 1 dg C for 24 hr)	1200.0
3.2 & 3.5 Sl.No.iv) (Ash)	1200.0
3.2 & 3.5 Sl.No.iii) (Drop point)	1200.0
3.2 & 3.5 Sl.No.ii) (Penetration of worked material 25 +/- 0.5 dg C(60 double Stokes))	1200.0
3.2 & 3.5 Sl.No.i) (Moisture and volatile matter)	1200.0

1248

IS 15573 (2018) - Polyaluminium Chloride

Polyaluminium Chloride

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.2 (pH of 5 percent solution)	1200.0
4.2 (Insoubles)	1200.0
4.2 (Selenium (as Se))	500.0
4.2 (Cadmium (as Cd))	500.0
4.2 (Chromium (as Cr))	500.0
4.2 (Manganese (as Mn))	500.0
4.2 (Iron (as Fe))	500.0
4.2 (Mercury (as Hg,)	700.0
4.2 (Arsenic (as As))	700.0
4.2 (Lead (as Pb))	700.0
4.2 (Bulk density)	700.0
4.2 (Specific gravity at 25 deg C)	500.0
4.2 (Sulphate as SO4)	700.0
4.2 (Chloride as Cl)	700.0
4.2 (Relative Basicity)	1200.0
4.2 (Aluminium as Al2O3)	1200.0

1249

IS 456 (2000) - Plain and reinforced concrete - WATER FOR CONSTRUCTION (Fourth Revision)

Plain and reinforced concrete - WATER FOR CONSTRUCTION (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.4 (pH)	500.0
5.4 (Volume (in ml) of 0.02 (N) H2SO4 required for Neutralization of 100 ml water using mixed indicator.)	500.0
5.4 (Volume (in ml) of 0.02 (N) NaOH required for Neutralization of 100 ml water using phenolphthalein as an indicator.)	500.0
5.4 (Total dissolved solids)	1000.0
5.4 (Suspended Matter)	500.0
5.4 (Chlorides (as Cl))	1000.0
5.4 (Sulphates ( as SO3))	1000.0
5.4 (Total Inorganic Solids)	500.0
5.4 (Total Organic Solids)	500.0
5.4.1.2 (Test for Compressive strength (IS 516))	4000.0
5.4.1.3 (Initial setting time of test block with sample water compared with distilled water(IS 4031 (Part 5):1988)	2000.0

1250

IS 13428 (2005) - Packaged Natural Mineral Water - Specification (Second Revision)

Packaged Natural Mineral Water - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

1251

IS 10500 (2012) - Drinking Water - Specification (Second Revision)

Drinking Water - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4 (Chloride (as Cl) - IS 3025 (Part 32): 1988, Clause 2/IS 3025 (Part 75) : 2022)	500.0
4 (Nickel (as Ni) - IS 3025 (Part 54):2003)	500.0
4 (Molybdenum (as Mo))	500.0
4 (Mercury (as Hg) - IS 3025 (Part 48) : 1994)	500.0
4 (Lead (as Pb) - IS 3025 (Part 47) : 1994)	500.0
4 (Cadmium (as Cd) - IS 3025 (Part 41) : 2022)	500.0
4 (Zinc (as Zn) - IS 3025 (Part 49): 1994)	500.0
4 (Total Hardness (as CaCO3) - IS 3025 (Part 21) : 2009)	500.0
4 (Total alkalinity as Calcium carbonate - IS 3025 (Part 23): 2023)	400.0
4 (Sulphide (as H2S) - IS 3025 (Part 29) : 2022, Clause 7)	300.0
4 (Sulphate (as SO4) - IS 3025 (Part 75) : 2022)	500.0
4 (Silver (as Ag) - Annex J of IS 13428 : 2005)	500.0
4 (Selenium (as Se) - IS 3025 (Part 56): 2003)	500.0
4 (Phenolic compounds (as C6H5OH) - IS 3025 (Part 43/Sec 1): 2022, Clause 6)	500.0
4 (Nitrate (as NO3) - IS 3025 (Part 75): 2022)	500.0
4 (Mineral Oil - IS 3025 (Part 39): 2021, Clause 6)	500.0
4 (Manganese (as Mn) - IS 3025 (Part 59): 2006)	500.0
4 (Magnesium (as Mg) - IS 3025 (Part 46): 1994)	500.0
4 (Iron (as Fe) - IS 3025 (Part 53) :2003, Clause 7)	500.0
4 (Free residual chlorine - IS 3025( Part 26) : 2021, Clause 7)	400.0
4 (Fluoride (as F) - IS 3025 (Part 75) : 2022)	500.0
4 (Copper (as Cu) - IS 3025 (Part 42): 1992)	500.0
4 (Calcium (as Ca) - IS 3025 (Part 40) : 1991, Clause 5)	500.0
4 (Boron (as B) - IS 3025 (Part 57): 2005)	500.0
4 (Barium (as Ba) - Annex F of IS 13428 : 2005)	500.0
4 (Anionic detergents (as MBAS) - Annex K of IS 13428 : 2005)	500.0
4 (Ammonia (as total ammonia-N) - IS 3025 (Part 34/Sec 1) : 2023, Clause 5.4)	-
4 (Aluminium (as Al) - IS 3025 (Part 55): 2003)	500.0
4 (Total Dissolved Solids - IS 3025 (Part 16) : 2023)	500.0
4 (pH value- IS 3025 (Part 11) : 2022)	300.0
4 (Odour - IS 3025 (Part 5) : 2018)	300.0
4 (Colour - IS 3025 (Part 4): 2021, Clause 4)	200.0
4 (Taste - IS 3025 (Part 8) : 2023))	200.0
4 (Turbidity - IS 3025 (Part 10) : 2023)	200.0
4.1 (Escherichia coli per 100 ml, Method: IS 15185:2016)	1750.0
4.1 (Total Coliform Bacteria per 100 ml, Method: IS 15185:2016)	1750.0
4 (Total Arsenic (as As) - IS 3025 (Part 37): 2022)	500.0
4 (Total Chromium (as Cr) - IS 3025 (Part 52) : 2003)	500.0
4 (Cyanide (as CN) - IS 3025 (Part 27/Sec 1) :2021, Clause 5))	500.0
4 (Chemical parameters as per Annexure A)	7500.0
Bacteriological (Bacteriological/Microbiological Test Results in Annexure)	3500.0

1252

IS 14543 (2024) - Packaged Drinking Water (other than Packaged Natural Mineral Water) - Specification

Packaged Drinking Water (other than Packaged Natural Mineral Water) - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.3 (Nickel (as Ni))	1000.0
5.3 (Chromium (as Cr))	1000.0
5.3 (Lead (as Pb))	1000.0
5.3 (Cyanide (as CN))	2000.0
5.3 (Arsenic (as As))	2000.0
5.3 (Cadmium (as Cd))	1000.0
5.3 (Mercury (as Hg))	2000.0
5.3 (Bromate (as BrO3))	1200.0
5.3 (Borates (as B))	1000.0
5.3 (Antimony (as Sb))	1000.0
5.3 (Sulphide (as H2S))	1000.0
5.3 (Anionic Surface active agents (as MBAS))	1200.0
5.3 (Mineral oil)	1000.0
5.3 (Phenolic compounds (as C6H5OH))	1000.0
5.3 (Residual free chlorine)	1000.0
5.3 (Sodium (as Na))	1000.0
5.3 (Magnesium (as Mg))	1000.0
5.3 (Calcium (as Ca))	1000.0
5.3 (Alkalinity (as HCO3))	1000.0
5.3 (Sulphate (as SO4))	1200.0
5.3 (Selenium (as Se))	1000.0
5.3 (Chloride (as Cl))	1000.0
5.3 (Aluminium (as Al))	1000.0
5.3 (Silver (as Ag))	1000.0
5.3 (Zinc (as Zn))	1000.0
5.3 (Fluoride (as F))	1000.0
5.3 (Nitrite (as NO2))	1000.0
5.3 (Nitrate (as NO3))	1000.0
5.3 (Manganese (as Mn))	1200.0
5.3 (Iron (as Fe))	1200.0
5.3 (Copper (as Cu))	1200.0
5.3 (Barium (as Ba))	1000.0
5.3 (pH)	1000.0
5.3 (Total dissolved solids)	1000.0
5.3 (Turbidity)	1000.0
5.3 (Taste)	1000.0
5.3 (Odour)	1000.0
5.3 (Colour, true colour units)	1200.0
5.2.9 (Vibrio parahaemolyticus)	1200.0
5.2.9 (Vibrio cholerae)	1200.0
5.2.8 (Shigella)	1200.0
5.2.8 (Salmonella)	1200.0
5.2.7 (Yeast & Mould)	1200.0
5.2.6 (Aerobic microbial count/ ml at 37° ± 1° C in 24 hours)	1200.0
5.2.6 (Aerobic microbial count/ ml at 20-22 °C in 72 hours)	1200.0
5.2.5 (Pseudomonas aeruginosa)	1200.0
5.2.4 (Sulphite reducing Anaerobes)	1200.0
5.2.3 (Staphylococcus aureus)	1200.0
5.2.3 (Faecal Streptococci)	1200.0
5.2.2 (Coliform)	1200.0
5.2.1 (Escherichia coli)	1200.0
5.4.1 (Annex D) (o, p-DDT)	5000.0

1253

IS 1489 (Part 1) (2015) - Portland pozzolana cement - Specification: Part 1 fly Ash Based

Portland pozzolana cement - Specification: Part 1 fly Ash Based

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6, Table 1, Sl No 4 (Loss on ignition IS 4032:1985)	800.0
6, Table 1, Sl No 1 (Insoluble residue, IS 4032:1985)	600.0
6, Table 1, Sl No 6 (Alkali content IS 4032:1985)	2000.0
6, Table 1, Sl No 2 (Magnesia IS 4032:1985)	600.0
6, Table 1, Sl No 5 (Chloride content, IS 4032:1985)	800.0
6, Table 1, Sl No 3 (Total Sulphur content IS 4032:1985)	800.0
7, Table 2, Sl No 1 (Fineness IS 4031(2):1999)	1000.0
7, Table 2, Sl No 6 (Drying Shrinkage IS 4031(10):1988)	1000.0
7, Table 2, Sl No 4c (28 Days Compressive strength, IS 4031(6):1988)	1000.0
7, Table 2, Sl No 4b (7 Days Compressive strength, IS 4031(6):1988)	1000.0
7, Table 2, Sl No 4a (3 Days Compressive strength, IS 4031(6):1988)	1000.0
7, Table 2, Sl No 3b (Setting time-Final IS 4031(5):1988)	250.0
7, Table 2, Sl No 3a (Setting time-Initial IS 4031(5):1988)	250.0
7, Table 2, Sl No 2b (Soundness-autoclave method IS 4031(3):1988)	1000.0
7, Table 2, Sl No 2a (Soundness-Lechatlier method IS 4031(3):1988)	500.0

1254

FCO -1985 (1985) - The Fertiliser (Control) Order 1985 (as amended upto Nov 2023)

The Fertiliser (Control) Order 1985 (as amended upto Nov 2023)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Schedule I Part A (Water soluble phosphates (as P2O5))	1000.0
Schedule I Part A (Water soluble potash (as K2O))	1000.0
Schedule I Part A (Water soluble Zinc (as Zn EDTA))	1000.0
Schedule I Part A (Water soluble potash (as K2O))	1000.0
Schedule I Part A (Water soluble phosphate (as P2O5))	1000.0
Schedule I Part A (Ammoniacal nitrogen)	1000.0
Schedule I Part A (Nitrate nitrogen)	1000.0
Schedule I Part A (Total nitrogen)	1000.0
Schedule I Part A (Moisture)	1000.0
Schedule I Part A (Matter insoluble in water)	1000.0
Schedule I Part A (Sulphur (as S))	1000.0
Schedule I Part A (Water soluble potash (as K2O))	1000.0
Schedule I Part A (Water soluble phosphates (as P2O5))	1000.0
Schedule I Part A (Urea nitrogen)	1000.0
Schedule I Part A (Sodium as NaCl)	1000.0
Schedule I Part A (Sodium (as NaCl) on dry basis)	1000.0
Schedule I Part A (Magnesium as MgO)	1000.0
Schedule I Part A (Total chloride (as Cl)(on dry basis))	1000.0
Schedule I Part A (Water soluble calcium (as Ca))	1000.0
Schedule I Part A (Particle size – Not less than 90 per cent of the material shall pass through 4 mm IS sieve and retained on 1mm IS sieve. Not more than 5 per cent shall be below 1 mm IS sieve.)	1000.0
Schedule I Part A (Zinc (as Zn))	1000.0
Schedule I Part A (Neutral ammonium citrate soluble phosphate (as P2O5) )	1000.0
Schedule I Part A (Boron (as B))	1000.0
Schedule I Part A (Water soluble calcium as)	1000.0
Schedule I Part A (Copper (as Cu))	1000.0
Schedule I Part A (Cadmium (as Cd))	1000.0
Schedule I Part A (Arsenic (as As))	1000.0
Schedule I Part A (Biuret)	1000.0
Schedule I Part A (Zinc (as Zn))	1000.0
Schedule I Part A (Specific gravity (kg/l))	1000.0
Schedule I Part A (Lead (as Pb))	1000.0
Schedule I Part A (Free flowing form)	1000.0
Schedule I Part A (Ortho Silicic [Si(OH)4], Plant available Silicon (Si) equivalent)	1200.0
Schedule I Part A (pH)	1000.0
Schedule I Part A (Poly-phosphate (as P2O5))	1000.0
Schedule I Part A (Acid insoluble matter)	1000.0
Schedule I Part A (Elemental sulphur (as S))	1000.0
Schedule I Part A (Total sulphur (as S))	1000.0
Schedule I Part A (Free Phosphoric Acid percent by weight )	1000.0
Schedule I Part A (2 per cent citric acid soluble phosphates (as P2O5) (on dry basis))	1000.0
Schedule I Part A (Neem oil content soluble in Benzene,)	1000.0
Schedule I Part A (Total Nitrogen (ammoniacal and urea) percent by weight)	1500.0
Schedule I Part A (Total Nitrogen (ammoniacal and nitrate))	1000.0
Schedule I Part A (Nitrogen in the form of urea)	1000.0
Schedule I Part A (Magnesium (as Mg))	1000.0
Schedule I Part A (Iron (as Fe))	1000.0
Schedule I Part A (pH (5% solution))	1000.0
Schedule I Part A (Iron content (expressed as Fe) in the form of Fe-EDTA)	1000.0
Schedule I Part A (Appearance – Free flowing crystalline or powder or Tablet)	1000.0
Schedule I Part A (Molybdenum (as Mo))	1000.0
Schedule I Part A (Chloride other than ammonium chloride (as NaCI) (on dry basis))	1000.0
Schedule I Part A (Sulphate Sulphur percent by weight)	1000.0
Schedule I Part A (Free acid (as H2SO4))	1000.0
Schedule I Part A (Free acidity (as H2SO4)(0.04 for material obtained from by-product ammonia and by-product gypsum))	1000.0
Schedule I Part A (Neutral ammonium citrate soluble phosphate (as P2O5))	1000.0
1(C)6 (Water soluble Calcium (as CaO))	1000.0
1(C)6 (Water soluble Magnesium (as MgO))	1000.0
Schedule I Part A (Total phosphate (as P2O5))	1000.0
Schedule I Part A (Sulphur (as S))	1000.0
Schedule I Part A (Zinc (as Zn) percent by weight)	1000.0
Schedule I Part A (Boron (as B))	1000.0
Schedule I Part A (Zinc content (Expressed as Zn) in the form of Zn-EDTA)	1000.0
Schedule I Part A (Iron content (expressed as Fe) in the form of Fe-EDTA)	1000.0
Schedule I Part A (Arsenic as (As2O3))	1000.0
Schedule I Part A (Magnesium (as MgCl2))	1000.0
20.1 (Zn as Zn HEDP)	1000.0
20.2 (Calcium Sulphate Dihydrate)	1000.0
1 (Total Viable spores/count per gram of product)	1000.0
1 (Physical particle size (as per TEM analysis) nm)	1000.0
1 (Hydrodynamic particle size (as per DLS analysis), nm)	1000.0
1 (Zeta Potential in mV (+/- scale))	1000.0
1 (Carbon (% by mass))	1000.0
1 (Carbon : Nitrogen ratio)	1000.0
9 (Bulk density)	1200.0
10 (Total Organic carbon (% by mass))	1200.0
11 (Manganese as Mn)	1200.0
1 (Contamination level)	1200.0
1 (Efficiency character)	1000.0
9 (Bulk density)	1200.0
10 (Total Organic carbon (% by mass))	1200.0
11 (Manganese as Mn)	1200.0
1 (Contamination level)	1200.0
1 (Efficiency character)	1000.0
Schedule I Part A (Available Phosphorous (as P2O5))	1000.0
0 (Chromium)	1000.0
0 (Nickel)	1000.0
0 (Mercury)	1000.0
0 (Ash)	1000.0
0 (Colour)	1000.0
0 (Flouride)	1000.0

1255

IS 9103 (1999) - Specification for Concrete Admixtures -

Specification for Concrete Admixtures -

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9 (Relative density)	1000.0
9 (Dry Material content)	1000.0
9 (Ash content)	1000.0
9 (Chloride ion content)	1000.0
9 (pH)	1000.0
7.2.1 (Slump of Control Concrete Mix at 15 Minutes)	2000.0
7.2.4 (Bleeding concrete additive)	2000.0
8.2.2 (Comparative Flexural strength for three duration of concrete additive)	10000.0
8.2.2 (Flexural strength for one duration of concrete additive)	5000.0
8.2.1 (Comparative Compressive strength for one duration of concrete)	5000.0
8.2.1 (Comparative Compressive strength for three duration of concrete)	10000.0
7.2.3 (Setting time of concrete additive allowable Deviation from control sample)	2000.0
7.2.5 (Water content of Concrete additive)	1000.0

1256

IS 1239 : Part 1 (2004) - Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes (BI-LINGUAL)

Steel Tubes, Tubulars and Other Wrought Steel Fittings : Part 1 Steel Tubes (BI-LINGUAL)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
14.3 (Flattening Test on tube above 50 mm NB)	1000.0
8.1 (Mass per meter)	1000.0
8 (Dimensions)	1000.0
14.1.1 (% Elongation on gauge length of 5.65 x Sq. root area)	1000.0
14.1 (Tensile Strength)	2000.0
6.1.1 (Chemical composition (Carbon))	625.0
6.1.1 (Chemical composition (Manganese))	625.0
6.1.1 (Chemical composition (Sulphur))	625.0
6.1.1 (Chemical composition (Phosphorus))	625.0
12 (Galvanizing (Mass of Zinc coating))	2000.0
12 (Galvanizing (Uniformity of Zinc coating))	1000.0
14.2 (Bend test on tube (upto and including 50 mm NB))	1000.0

1257

IS 8329 (2000) - Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision)

Centrifugally cast (Spun) ductile iron pressure pipes for water, gas and sewage - Specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
15.1.1 (External diameter)	1000.0
13.3 (Wall Thickness of pipe)	1000.0
16.3 (Thickness of Cement mortar lining of pipe)	1000.0
15.3 (Ovality of pipe)	1000.0
10.2 (Brinell Hardness)	2000.0
10.1.1 (Percent Elongation)	1500.0
10.1.1 (Tensile Strength)	2000.0
13.2 (Bore Clearance of mortar lining in ductile iron pipe)	1000.0
11.1 (Hydrostatic test at site)	5000.0
A-1 (Pipe surface condition at site)	1000.0

1258

IS 1367 : Part 6 (2018) - Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision)

Technical supply conditions for threaded steel fasteners: Part 6 mechanical properties of fasteners made of carbon steel and alloy steel - Nuts with specified property classes - Coarse thread and fine pitch thread (Fourth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Hardness Test)	2000.0
7 (Proof Load)	3000.0
6 (Carbon, % by mass)	500.0
6 (Sulphur, % by mass)	500.0
6 (Phosphorus, % by mass)	500.0
6 (Manganese, % by mass)	500.0

1259

IS 1367 : Part 3 (2017) - Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision)

Technical supply conditions for threaded steel fasteners: Part 3 mechanical properties of fasteners made of carbon steel and bolts, screws and studs (Fifth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Hardness Test)	2000.0
7 (Proof Load, N.)	3000.0
7 (Tensile load, N.)	3000.0
2 (Dimensions)	1500.0
5 (Surface Integrity)	1200.0
6 (Carbon, % by mass)	500.0
6 (Phosphorus, % by mass)	500.0
6 (Sulphur, % by mass)	500.0
9.7.1 (Tensile Strength on Machined Test Piece, MPa.)	1000.0
9.7.1a (Yield Strength on Machined Test Piece, MPa.)	1000.0
9.7.1b (Percentage Elongation on Machined Test Piece, %.)	1000.0
9.14 (Impact Strength at (-) 20⁰C)	5000.0
1 (% Reduction in Area)	1000.0
0 (Shear test on machined test piece)	3000.0

1260

IS 6006 (2014) - Uncoated stress relieved strand for prestressed concrete - Specification (Second Revision)

Uncoated stress relieved strand for prestressed concrete - Specification (Second Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.3 (Elongation)	1000.0
7.3 (0.2% Proof Load)	1000.0
7.3 (Breaking Strenth)	3000.0
5.3 (Nominal Mass)	1500.0
5.3 (Nominal Area )	1000.0
5.3 (Nominal Diameter )	1000.0
5.1 (Dimension 3- Ply 3mm strand: Nominal Diameter of element wire)	500.0
3.1.2 (Sulphur, % by mass.)	750.0
3.1.2 (Phosphorus)	500.0
4.2 (Length of lay of 3- Ply 3mm strand: 24-36 time of dia of element wire)	1000.0