NTH - Management Information System

Search by Standard No.

Reset

3846 Results

S.No.

Lab Name

Standard No.

Product

Testing Charges (Excl. Of Taxes)

National Test House (ER), Alipore

IS 14255:1995 - Aerial bunched cables - For working voltages up to and including 1100 Volts - Specification

Aerial bunched cables - For working voltages up to and including 1100 Volts - Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
10.1(a)(i), 10.2(a) (Tensile test (for phase/street light conductors))	1000.0
10.1(a)(ii), 10.2(b) (Wrapping Test)	500.0
10.1(a)(iii), 10.2(e), 10. (Conductor Resistance Test)	2000.0
10.1(b)(i),10.2(c) (Breaking load test on messanger conductor)	1000.0
10.1(b)(ii),10.2(d) (Elongation test for messanger conductor)	1500.0
10.1(b)(iii),10.2(e),10.3(a) (Conductor Resistance test on messanger)	2000.0
10.1(c)(i), 10.2(g) (Tensile Strength and elongation at break for XLPE Insulation)	1500.0
10.1(c)(ii) (Ageing in Air Oven for XLPE Insulation)	2000.0
10.1(c)(iii), 10.2(h) (Hot Set Test for XLPE Insulation)	2000.0
10.1(c)(iv) (Shrinkage Test for XLPE Insulation)	1000.0
10.1(c)(v) (Water Absorption (Gravimetric) for XLPE Insulation)	1000.0
10.1(d)(i),10.2(g) (Tensile Strength and elongation at break for PE Insulation)	1500.0
10.1(d)(ii) (Melt Flow Index for PE Insulation)	2000.0
10.1(d)(iv) (Vicat Softening point for PE Insulation)	2000.0
10.1(e),10.2(f) (Test for thickness of Insulation)	1500.0
10.1(f), 10.2(j) (Insulation Resistance Test (Volume Resistivity))	2000.0
10.1(g),10.2(k),10.3(b) (High Voltage Test)	1500.0

National Test House (NR), Ghaziabad

DoCA Gazette:CG-DL-E-26012022-232917 - Drone Testing

Drone Testing

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Damp Heat Test (Damp Heat Test)	10000.0
Dry Heat (Dry Heat)	10000.0
Cold Heat (Cold Heat)	10000.0
Shock Resistance Test (a)Half Sine, b)gn=5 to 30, c)(Total 18 in number Shocks in X,Y,Z Axes i.e (3 positive + 3 negative)3 axes) d)Number of Shocks:1 shock/15sec d)Weight Upto:30kg.)	50000.0
Shock Resistance Test (a)Half Sine, b)gn=5 to 40, c)(Total 18 in number Shocks in X,Y,Z Axes i.e (3 positive + 3 negative)3 axes) d)Number of Shocks:1 shock/15sec d)Weight Upto: 50kg to 75kg)	90000.0
Dust Protected (IP5X)	12000.0
Dust Tight (IP6X)	12000.0
Shock Resistance Test (1)	1.0
Shock Resistance Test (2)	1.0
Shock Resistance Test (3)	1.0
Shock Resistance Test (4)	1.0
Shock Resistance Test (5)	1.0
Shock Resistance Test (6)	1.0
Shock Resistance Test (7)	1.0
Shock Resistance Test (8)	1.0
Shock Resistance Test (9)	1.0
Shock Resistance Test (10)	1.0
1 ()	-

National Test House (NWR), Jaipur

IS 1290 (2023) - Specification for Mineral Gypsum (Third Revision)

Specification for Mineral Gypsum (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
No Record Found

National Test House (NR), Ghaziabad

FCO -1985 - The Fertiliser (Inorganic, Organic or Mixed) (Control) Order 1985

The Fertiliser (Inorganic, Organic or Mixed) (Control) Order 1985

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
2 (i) (Moisture per cent by weight, maximum)	1000.0
2 (ii) (Total Nitrogen, per cent by weight (On dry basis), minimum)	1000.0
2 (iii) (Bituret per cent by weight, maximum)	1000.0
2 (iv) (Particle size - Material retrained between 1 mm and 2.8 mm IS sieve, percent by weight)	1000.0

National Test House (NR), Ghaziabad

Custom spec VOC VS Mass - Polyurethane paint

Polyurethane paint

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3 (Custom Spec VOC VS Mass)	6500.0

National Test House (SR), Chennai

IS 9845 (1998) - Determination of Overall Migration of Constituents of Plastics Materials and Articles Intended to Come in Contact with Foodstuffs/ Polymer identification for food grade plastic [-]

Determination of Overall Migration of Constituents of Plastics Materials and Articles Intended to Come in Contact with Foodstuffs/ Polymer identification for food grade plastic

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.0 (DETERMINATION OF OVERALL MIGRATION)	3000.0

National Test House (ER), Kolkata

Custom - Surface Chemistry

Surface Chemistry

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
0 (Aluminium)	1000.0
0 (Magnesium)	1000.0
0 (Zinc)	1000.0

National Test House (SR), Chennai

IS 13489, IS 8391 (Part-3) & IS7933 (2025, 2019 & 2022) - TEXTILES — BED MATTRESS — (First Revision) SPECIFICATION, Rubberized Coir Sheets for Cushioning - Specification Part 3 Sandwiched ( Third Revision ) & Flexible Polyurethane Foam for Domestic Mattresses -Specification

TEXTILES — BED MATTRESS — (First Revision) SPECIFICATION, Rubberized Coir Sheets for Cushioning - Specification Part 3 Sandwiched ( Third Revision ) & Flexible Polyurethane Foam for Domestic Mattresses -Specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Test Results)	33000.0
7.7 of IS 8391 (Part-3) (pH value of Sandwiched Rubberized Coir)	1000.0
7.8 of IS 8391(Part-3) (Chloride content of sandwiched Rubberized coir)	1000.0
7.9 of IS 8391 (part-3) (Sulphate content of Sandwiched Rubberized Coir)	1000.0

National Test House (SR), Chennai

IS 17546 & ASTM 2846 (2021 & 1999) - CHLORINATED POLYVINYL CHLORIDE ( CPVC ) FITTINGS FOR POTABLE HOT AND COLD WATER DISTRIBUTION SUPPLIES — SPECIFICATION

CHLORINATED POLYVINYL CHLORIDE ( CPVC ) FITTINGS FOR POTABLE HOT AND COLD WATER DISTRIBUTION SUPPLIES — SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
8.3 (Stress Relief Test)	1000.0
9.0 (Leak Test)	5000.0
6.1.2.3 (Flattening)	2000.0
6.2 (Hydrostatic Sustained Pressure Test)	5000.0
Firm's Request (Fitment Test)	2000.0

National Test House (SR), Chennai

IS 14735 (1999) - UNPLASTICIZED POLYVINYL CHLORIDE (UPVC) INJECTION MOULDED FITIINGS FORSOIL AND WASTE DISCHARGE SYSTEM FORINSIDE AND OUTSIDE BUILDINGS INCLUDING VENTILATION AND RAIN WATER SYSTEM- SPECIFICATION

UNPLASTICIZED POLYVINYL CHLORIDE (UPVC) INJECTION MOULDED FITIINGS FORSOIL AND WASTE DISCHARGE SYSTEM FORINSIDE AND OUTSIDE BUILDINGS INCLUDING VENTILATION AND RAIN WATER SYSTEM- SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7.1 (Wall Thickness)	1000.0
12.2 (Stress Relief Test)	2000.0
13 (Resistance to Sulphuric Acid)	2000.0
16.1 (Impact Test (Drop Test))	2000.0
12.3 (Vicat Softening Temperature)	1500.0
7.2 & 8 (Outer Diameter)	1000.0
17.0 (Water Tightness of joint (Leakage Test))	5000.0
Firm's Request (Flattening Test)	2000.0
Firm's Request (Fitment Test)	2000.0

National Test House (SR), Chennai

CUS/SR/CHEM/CSD-13691 (2025) - Polo Queen Shudh Knife Set (Pack of 3)

Polo Queen Shudh Knife Set (Pack of 3)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1 (Composition/Active Ingredients (BLADE) - Test results in Annexure.)	5000.0
2 (Composition/Active Ingredients (HANDLE))	2000.0

National Test House (NER), Guwahati

IS 9537:Part 3 (1983) - Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating materials

Specification for conduits for electrical installations: Part 3 rigid plain conduits of insulating materials

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12 (12.1.2 Of IS:9537-Part I Insulation Resistance)	2000.0
12.1 (12.1.1 of IS:9537-Part I Electrical Strength)	2000.0
6.1 (Marking, manufacturer's name/trade mark, Visual verification (Naked Eye))	-
6.4 (Durability of Marking)	-
7.4 (Uniformity of Wall Thickness)	-
8 (Construction)	1000.0

National Test House (WR), Mumbai

IS 15905 (2024) - Hubless Centrifugally Cast (Spun) Iron Pipes, Fittings and Accessories — Spigot Series — Specification( First Revision )

Hubless Centrifugally Cast (Spun) Iron Pipes, Fittings and Accessories — Spigot Series — Specification( First Revision )

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
7 (Visual Inspection and Hammer Test as per IS 15905)	1000.0
8 (Crush Tests on Pipes Ring as per IS 15905)	2000.0
9 (Hydrostatic Test as per IS 15905)	2500.0
10 (Dimensions and Tolerances as per IS 15905 (> 10 measurments))	2000.0

National Test House (WR), Mumbai

IS 4270 (2001) - Steel tubes used for water wells specification (Third Revision)

Steel tubes used for water wells specification (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.2 (Chemical analysis)	2500.0
9 (Outside diameter)	3000.0
6.2 (Flattening)	1000.0
6.1 (Tensile test)	3000.0
7 (Weight in kg/m)	1000.0
7 (Length)	250.0
7 (Thickness)	250.0
7 (Outside diameter)	250.0
14 (Visual examination)	1000.0
5.2 (Sulphur)	1250.0
6.2 (Flattening Test)	1500.0
6.1 (% Elongation)	1000.0
6.1 (Tensile Strength)	1000.0
6.1 (Yield Strength)	1000.0
7 (Thickness)	1000.0
14 (Workmanship)	1000.0
5.2 (Phosphorus)	1250.0

National Test House (WR), Mumbai

BS EN 12467 (2012) - Fibre - cement flat sheets - Product specification and test method.

Fibre - cement flat sheets - Product specification and test method.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5.3.2 (Nominal Length, in mm)	500.0
5.3.2 (Nominal Width, mm)	500.0
503.3 (Thickness, in mm)	1000.0
5.3.4.1 (Tolerance on length, in mm)	500.0
5.3.4.1 (Tolerance in Width, in mm)	500.0
5.3.4.2 (Tolerance on thickness, in mm or %)	500.0
5.3.5.1 (Straightness of Edges, in %)	500.0
5.3.5.2 (Squareness of edges, in mm/m)	500.0
5.4.2 (Apparent Density)	1000.0
5.4.3 (Moisture Movement, in %)	2000.0
5.4.4 (Bending Strength (MOR) in Ambient Laboratory condition, in MPa.)	4000.0
5.4.4 (Bending Strength (MoR) in Wet Condition, MPa)	8000.0
5.4.5 (Water Impermeability,)	4000.0
5.5.2 (Freeze Thaw Test)	25000.0
5.5.4 (Warm Water Durability test)	25000.0
5.5.5 (Soak Dry Durability Test)	25000.0

National Test House (NER), Guwahati

IS 398 : Part 2 (1996) - Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

Aluminium conductors for overhead transmission purposes - Specification: Part 2 aluminium conuuctors, galvanized steel - Reinforced (Third Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
12 (Seal, Packing & Markings (7/30/54 wire construction))	-
10 (Construction (7/30/54 wire construction))	-
13.2 (Measurement of diameter of individual Aluminium wires (7 wire construction))	1000.0
13.2(1) (Diameter of individual steel wires (7 wire construction))	1000.0
13.6 (Resistance of Aluminium wire (7 wire construction))	5000.0
13.8 (Measurement of lay ratio(7 wire construction))	2000.0

National Test House (SR), Chennai

Bus Shelter SS Twin Bin (2025) - Bus Shelter SS Twin Bin

Bus Shelter SS Twin Bin

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Dimension, Construction and Volume - SS Bin)	5000.0
2.0 (LLDPE Material Identification, Dimension, Volume, Density and Melt Flow Rate of Plastic Bin.)	7000.0

National Test House (ER), Kolkata

IRC 116-2014 - SPECIFICATIONS FOR READYMADE BITUMINOUS POTHOLE PATCHING MIX USING CUT-BACK BITUMEN

SPECIFICATIONS FOR READYMADE BITUMINOUS POTHOLE PATCHING MIX USING CUT-BACK BITUMEN

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
3.1 (Wet Coating Test)	1000.0
3.1 (Static-Immersion Test)	1000.0
3.1 (Water Resistance Test)	1000.0
6 (Workability Test)	1000.0

National Test House (ER), Kolkata

IS 12406 (2021) - Medium density fibre boards for general purpose - Specification (First Revision)

Medium density fibre boards for general purpose - Specification (First Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
9, Table 3 and 4, Sl No (x) (Screw Withdrawal Strength-IS 2380 (Part 14): 1977)	1500.0
9, Table 3 and 4, Sl No (vii) (Internal Bond strength after cyclic/accelerated water resistance test-IS 12406:2021 & IS 2380 (Part 5): 1977)	2000.0
9, Table 3 and 4, Sl No (vi) (Internal Bond Strength-IS 2380 (Part 5): 1977)	2000.0
9, Table 3 and 4, Sl No (viii) (Modulus of Rupture -IS 2380 (Part 4): 1977)	2500.0
9, Table 3 and 4, Sl No (ix) (Modulus of Elasticity-IS 2380 (Part 4): 1977)	2000.0
9, Table 3 and 4, Sl. No. (v) (Linear Expansion (thickness swelling of water) due to general absorption after 24 hr soaking -IS 2380 (Part17): 1977)	1000.0
9, Table 3 and 4, Sl No (xi) (Formaldehyde content-IS 13745:1993.)	3000.0
9, Table 3 and 4, Table 3 & 4, Sl. No. (iii) & (iv) (Moisture Content-IS 2380 (Part 3): 1977)	1000.0
9, Table 3 & 4, Sl. No. (i) & (ii) (Density-IS 2380 (Part 3): 1977)	500.0
8, Table 2 (Dimension & Tolerances-IS 12406:2021, Annex A)	500.0
7 (Finish-IS 12406:2021)	1000.0

National Test House (WR), Mumbai

Custom - Concrete - Custom Physical Tests on hardened Concrete

Custom Physical Tests on hardened Concrete

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- - (Compressive Strength , MPa)	1200.0
- - (Water Absorption)	1000.0
- - (Water Absorption after 24 hours)	1000.0
- - (Density of concrete)	1000.0

National Test House (ER), Kolkata

IS 6615 (2021) - GENERAL PURPOSE PACKING/WRAPPING PAPER — SPECIFICATION

GENERAL PURPOSE PACKING/WRAPPING PAPER — SPECIFICATION

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (General)	1000.0
4.2 (Grammage)	1000.0
4.3, Table 1, (i) (Burst index)	2000.0
4.3, Table 1, (ii) (Tear index, MD)	1000.0
4.3, Table 1, (ii) (Tear index, CD)	1000.0
4.3, Table 1, (iii) (Tensile index, MD)	2000.0
4.3, Table 1, (iv) (Moisture content)	1000.0
4.3, Table 1, (v) (Cobb, Top side)	1000.0
4.3, Table 1, (v) (Cobb, Bottom side)	1000.0

National Test House (ER), Kolkata

IS 3885 Part 1 (1992 (RA 2001)) - STEEL FOR THE MANUFACTURE OF LAMINATED SPRINGS (RAILWAY ROLLING STOCK) FLAT SECTIONS

STEEL FOR THE MANUFACTURE OF LAMINATED SPRINGS (RAILWAY ROLLING STOCK) FLAT SECTIONS

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
6.3 (Chemical Analysis as per IS 3885(Part 1))	3000.0
7 (Brinell Hardness as per IS 1500 Part 1)	2000.0
8 (Decarburization)	3000.0
9 (Inclusion Rating)	3000.0

National Test House (WR), Mumbai

NTH/WR/RPPT/Inspection of Paper - NTH/WR/RPPT/Inspection of Paper

NTH/WR/RPPT/Inspection of Paper

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Paper Inspection Report)	30798.0

National Test House (WR), Mumbai

NTH/WR/RPPT/2025/Inspection of papers - Inspection of Papers [-]

Inspection of Papers

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
- (Firms requirements)	115000.0

National Test House (WR), Mumbai

NTH/NR/RPPT/Paper Inspection (2024) - Inspection of Papers

Inspection of Papers

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
Firm's Requirements (Inspection Report)	25500.0

National Test House (SR), Chennai

Custom/NTH(SR)/RPPT/CSD - Custom specification

Custom specification

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1.0 (Test results - Rupa Thermo cot Agni Agents TR.O.E 90 cm Index No 45060)	5000.0
2.0 (Test Results - Rupa Thermo cot Agni agents R/N F/S 85 cm Index no - 45062)	14500.0
3.0 (Test Results - Dollar Bigboss Brieff T/E 100 cm Index no 41632)	14500.0
4.0 (Test Results - S.I. enterprises flora foam bra 36 inch colors white, black, skin pack of 3 pcs Index no 38002)	4000.0
5.0 (Test results - S.I. enterprises flora foam bra 36 inch colors red, maroon, navy pack of 3 pcs Index no 38003)	4000.0
6.0 (Test results - Lavie Sport - Prodigy NV - Laptop Back Pack Black Index no 38248)	4000.0
7.0 (Test results - Lavie Sport - Prodigy NV - Laptop Back Pack Navy Index no 38249)	4000.0

National Test House (SR), Chennai

IS 5084 (1990) - Socks, nylon – Specification (first revision)

Socks, nylon – Specification (first revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
5 & 6 (Test Results)	15000.0

National Test House (WR), Mumbai

Custom - Cement Sand mix. - Cement - Sand Mix. [- -]

Cement - Sand Mix.

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
-- (Sand Content and cement content, %)	3000.0
- - (Visual Examination)	2000.0
- - (Physical Properties)	2000.0
- - (Chemical composition of cement)	5000.0

National Test House (WR), Mumbai

Custom (0) - Cement Sand ratio

Cement Sand ratio

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
1. (Cement sand ratio)	5000.0

National Test House (WR), Mumbai

IS 2347 (2023) - Domestic pressure cooker - Specification (Sixth Revision)

Domestic pressure cooker - Specification (Sixth Revision)

- View breakup
-

Clause No.	Testing Charges (Excl. Of Taxes)	NABL
4.1 (Capacity)	500.0
6.1.1 (Vent pipe inside diameter)	500.0
8.1 (Air Pressure of domestic pressure cooker)	1000.0
8.2 (Proof Pressure of domestic pressure cooker)	2000.0
8.3 (Operating pressure for Pressure Regulating Device)	1000.0
8.4.1 Annex-H cl. No. H-1.1 (Operating pressure of Safety Pressure Relief Device for destructible device)	1000.0
8.6.1 (Removal of Lid under Pressure (For Outer Lid Cooker))	1000.0
8.6.2 (Removal of Lid under Pressure (For Inner Lid Cooker))	1000.0
8.5 (Bursting Pressure Test)	3000.0
5.3 (Performance Test on Gasket)	1000.0
7.4 Annex-E cl. No. E-2 (Coating thickness for body)	2000.0
7.4 Annex-E cl. No. E-3 (Abrasion resistance for body)	500.0
7.4 Annex-E cl. No. E-4 (Micro Vickers Hardness for body)	2000.0
8.9 (Test for Induction Bottom)	5000.0
TDS 1 (Weight, kg.)	-
5.1 (Chemical Composition, % by mass.)	6000.0
TDS-2 (Overall Dimension- Thickness, mm.)	-
7.4 Annex-E cl. No. E-2 (Coating thickness for lid)	2000.0
7.4 Annex-E cl. No. E-3 (Abrasion resistance for lid)	500.0
7.4 Annex-E cl. No. E-4 (Micro Vickers Hardness for lid)	2000.0
5.4 (Performance test for pressure cooker handle as per IS 13395)	11000.0
0 (Test Result as per Annexure.)	20000.0
8.4.1 Annex-H cl. No. H-1.2 (Operating pressure of Safety Pressure Relief Device for Gasket Release System.)	1000.0
0 (CSD - Pressure Cooker -All Possible Test as per TDS and IS 2347)	5000.0

1
2
3
Next
Last